Mercury V-175 (4301235 THRU 0C100860) Outboard Motor Parts Diagram & Catalog – Free PDF Download
Carburetor
Back to TopBelow is the parts list for Mercury V-175 Carburetor:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CARBURETOR Comment: (WH-13) | 1374-5643A60 | |
1 | CARBURETOR Comment: (TOP)(WH-1) | 1374-5643A3 | |
1 | CARBURETOR Comment: (CENTER)(WH-4) | 1374-5643A10 | |
1 | No Longer Available, Carburetor Comment: (BOTTOM)(WH-4) | NLA | |
1 | CARBURETOR Comment: (TOP)(WH-28) | 1374-5643A76 | |
1 | CARBURETOR Comment: (CENTER)(WH-28) | 1374-5643A77 | |
1 | CARBURETOR Comment: (BOTTOM)(WH-28) | 1374-5643A78 | |
1 | CARBURETOR Comment: (TOP)(WH-39) | 1374-9242A4 | |
1 | CARBURETOR Comment: (CENTER)(WH-39) | 1374-9242A5 | |
1 | CARBURETOR Comment: (BOTTOM)(WH-39) | 1374-9242A6 | |
1 | CARBURETOR Comment: (TOP)(WH-46) | 1374-9242A10 | |
1 | CARBURETOR Comment: (CENTER)(WH-46) | 1374-9242A11 | |
1 | CARBURETOR Comment: (BOTTOM)(WH-46) | 1374-9242A12 | |
2 | JET, (.090), VENT BOWL | 1395-6247 | |
2 | JET, (.082), VENT BOWL | 1399-3518 | |
3 | NOT SOLD SEPARATE, Gasket-Cover Plate | NSS | |
4 | PLATE | 1395-6032 | |
5 | SCREW, COVER PLATE | 1395-9597 | |
6 | No Longer Available, Fuel Bowl Comment: (WH-1/4/7/7A) | NLA | |
6 | FUEL BOWL Comment: (WH-13) | 1395-7822 | |
6 | FUEL BOWL Comment: (TOP)(WH-17/17R/30/34) | 1395-7823 | |
6 | FUEL BOWL Comment: (CENTER/BOTTOM))(WH-17/17R/30/34) | 1395-7822 | |
7 | NOT SOLD SEPARATE, Screw-Fuel Bowl | NSS | |
8 | PLUG, MAIN JET | 1395-6025 | |
9 | NOT SOLD SEPARATE, Gasket-Main Jet | NSS | |
10 | JET, (.064), MAIN FUEL | 1399-4216 | |
10 | MAIN FUEL JET, (.066), MAIN FUEL | 1399-4215 | |
10 | JET, (.074), MAIN FUEL | 1399-3794 | |
10 | JET, (.078), MAIN FUEL | 1395-6680 | |
11 | NOT SOLD SEPARATE, Screw-Float Pin | NSS | |
12 | NOT SOLD SEPARATE, Gasket-Inlet Needle and Seat | NSS | |
13 | INLET NEEDLE AND SEAT Comment: (WH-7A ONLY) | 1395-7624 | |
13 | INLET NEEDLE AND SEAT ASSEMBLY | 1395-7824 | |
14 | NOT SOLD SEPARATE, Gasket-Nozzle Boss | NSS | |
15 | FLOAT Comment: (WH-1/4/7/7A) | 1395-9267 | |
15 | FLOAT Comment: (WH-13/17/17R/30/34) | 1395-9267 | |
16 | NOT SOLD SEPARATE, Pin-Float Lever | NSS | |
17 | NOT SOLD SEPARATE, Gasket-Fuel Bowl | NSS | |
18 | SCREW, IDLE AIR BLEED JET | 1395-4541 | |
19 | NOT SOLD SEPARATE, Gasket-Bleed Jet Plug | NSS | |
20 | JET, (.044), IDLE AIR BLEED | 1395-7394 | |
20 | JET, (.048), IDLE AIR BLEED | 1395-6246 | |
20 | JET, (.070), IDLE AIR BLEED | 1395-6030 | |
21 | SCREW, THROTTLE LEVER | 1395-6027 | |
22 | LEVER | 67752 | |
22 | LEVER Comment: (WH-30/34 ONLY) | 814679 | |
23 | NOT SOLD SEPARATE, Spring-Throttle Return | NSS | |
24 | SPACER, THROTTLE LEVER | 1395-6031 | |
25 | SHAFT | 1395-6022 | |
26 | NOT SOLD SEPARATE, Spring-Retainer-Throttle Shaft | NSS | |
27 | THROTTLE VALVE | 1395-6023 | |
27 | THROTTLE VALVE Comment: (WH-30/34) | 1395-9416 | |
28 | NOT SOLD SEPARATE, Screw-Throttle Valve | NSS | |
- | GASKET AND PACKING SET | 1395-6452 | |
- | REPAIR PARTS KIT, Carburetor | 1395-7826 | |
- | REPAIR PARTS KIT, Carburetor Comment: (WH-17R/30/34) | 1395-8506 |
Choke Plate and Choke Linkage(Design I)
Back to TopBelow is the parts list for Mercury V-175 Choke Plate and Choke Linkage(Design I):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CHOKE SOLENOID | 54293A10 | |
2 | SCREW, (.312-18 x .750) | 10-39349 | |
3 | LOCKWASHER, (.312) | 13-8M0204647 | |
4 | PLUNGER AND LINK | 56074A11 | |
5 | LOCKWASHER, | 10,13-26996 | |
6 | NUT, | 10-32,11-68219 | |
7 | BRACKET | 67245T | |
8 | GROMMET | 25-67272 | |
9 | MOUNT | 90435 | |
10 | WASHER | 12-21249 | |
11 | NUT, (.250-28) | 11-8267089 | |
12 | GASKET | 27-672741 | |
13 | CHOKE PLATE | 99390A4 | |
14 | SCREW, (.24-28 X 1.00) | 10-68000 | |
15 | STUD (2-9/16") | 16-33071 | |
16 | GASKET | 27-672751 | |
17 | COVER | 67246T | |
18 | WASHER, (.255 x .625 x .0312) | 12-69056 | |
19 | LOCKWASHER, (.250) | 13-26992 | |
20 | NUT | 11-26001 | |
21 | RETAINER | 89041 | |
22 | SCREW, (#10-16 x .500) | 10-48408 | |
23 | CHOKE SHAFT | 73861A1 | |
24 | CHOKE SHUTTER | 76040 | |
25 | SCREW | 10-75898 | |
26 | CHOKE SHAFT LEVER | 90401 | |
27 | SPRING | 24-88578 | |
28 | MANUAL CHOKE ROD | 73860 | |
29 | GROMMET | 25-67273 | |
30 | KNOB | 67247 | |
31 | SCREW | 10-67262 | |
32 | CHOKE ROD | 67249 | |
33 | SPRING | 24-88522 | |
34 | PLUG | 19-90585 | |
35 | IDLE SPEED CONTROL ASSEMBLY | 87076A4 |
Choke Plate and Throttle Levers(Design II)
Back to TopBelow is the parts list for Mercury V-175 Choke Plate and Throttle Levers(Design II):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | BRACKET, COWL MOUNTING - UPPER | 67245T | |
2 | GROMMET | 25-67272 | |
3 | MOUNT | 90435 | |
4 | WASHER | 12-21249 | |
5 | NUT, (.250-28) | 11-35888 | |
6 | IDLE SPEED CONTROL ASSEMBLY | 87076A4 | |
7 | PLATE | 799831 | |
8 | GASKET | 27-672741 | |
9 | SCREW, (.24-28 X 1.00) | 10-68000 | |
10 | WASHER | 12-20583 | |
11 | GASKET | 27-672751 | |
12 | COVER | 67246T | |
13 | SCREW, (.250-20 x 2.25) | 10-30720 | |
14 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
15 | LOCKWASHER, (.250) | 13-26992 | |
16 | PLUG | 19-90585 | |
17 | THROTTLE LINK | 67760 | |
18 | THROTTLE LEVER Comment: (NON OIL INJECTION)(CENTER/UPPER) | 67759 | |
18 | THROTTLE LEVER Comment: (OIL INJECTION)(UPPER) | 67759 | |
19 | THROTTLE LEVER Comment: (OIL INJECTION)(CENTER) | 41049 | |
20 | THROTTLE LEVER, LOWER | 67749 | |
21 | SCREW, (#10-32 x .750) | 10-15124 | |
22 | LOCKWASHER, | 10,13-26996 | |
23 | WASHER, (.200 x .440 x .032) | 12-24676 | |
24 | CLEVIS PIN | 17-67297 | |
25 | WASHER, (.203 x .406 x .040) | 12-89302 | |
26 | COTTER PIN | 18-26953 | |
27 | ROLLER | 67748 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Refer to Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Cowl Mounting Brackets
Back to TopBelow is the parts list for Mercury V-175 Cowl Mounting Brackets:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | BRACKET Comment: (BLACK) | 76258A2 | |
1 | BRACKET Comment: (GRAY) | 76258A3 | |
1 | BRACKET Comment: (OYSTER) | 76258A3 | |
2 | NOZZLE Comment: (BLACK & GRAY) | 22-76256 | |
2 | NOZZLE Comment: (OYSTER) | 22-762561 | |
2 | NOZZLE Comment: (SCREW ATTACHING /10-35519) | 52889 | |
3 | SEAL | 67984 | |
4 | SEAL | 67228 | |
5 | SEAL | 67999 | |
6 | FUEL LINE, (57.00 Inches Bulk), TELL TALE | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
7 | TEE Comment: SN# USA-5875204/AUS-8072023 & Up | 22-90824001 | |
8 | CABLE TIE, (14.00 Inches) | 61990 | |
9 | BRACKET ASSEMBLY | 86386A1 | |
10 | SCREW, (#10-32 x 1.50) | 10-66687 | |
11 | HOUSING Comment: (PORT) | 85651 | |
11 | HOUSING Comment: (STARBOARD) | 85650 | |
12 | SCREW (1") | 10-64278 | |
13 | WASHER | 12-20583 | |
14 | NUT, (.250-28) | 11-8267089 | |
15 | BRACKET Comment: SN# USA-5875203/AUS-8072022 & Below | 88623A1 | |
15 | BRACKET Comment: SN# 5875204 THRU 6618750 | 92009T | |
15 | BRACKET Comment: (Black) SN# 6618751 & Up | 99424 | |
15 | BRACKET Comment: (Gray) SN# 6618751 & Up | 99424T6 | |
15 | BRACKET Comment: (Oyster) | 99424T6 | |
16 | RETAINER Comment: SN# 6618750 & Below | 88621 | |
16 | RETAINER Comment: SN# 6618751 & Up | 99447 | |
17 | SCREW, (10-24 X 1.00) | 10-89900 | |
18 | SEAL | 67260 | |
19 | MOUNT | 90435 | |
20 | WASHER | 12-21249 | |
21 | NUT, (.250-28) | 11-8267089 | |
22 | HOUSING | 67241 | |
23 | SCREW, (10-16 x .75) | 10-92051 | |
24 | LATCH Comment: SN# 6618750 & Below | 76264 | |
24 | COWL LATCH Comment: SN# 6618751 & Up | 87608 | |
25 | SPRING | 24-60295 | |
26 | PLATE | 88622 | |
27 | RETAINER Comment: SN# 6618751 & Up | 99391 | |
28 | SCREW, (.25-20 X 1.375) Comment: SN# 6618751 & Up | 10-69067 | |
29 | WASHER (SMALL) Comment: SN# 6618751 & Up | 12-69057 | |
30 | WASHER, (.255 x .620 x .030) (LARGE) Comment: SN# 6618751 & Up | 12-35280 | |
31 | BUSHING Comment: SN# 6618751 & Up | 23-88180 | |
32 | GROMMET Comment: SN# 6618751 & Up | 25-88033 | |
33 | WASHER Comment: SN# 6618751 & Up | 12-26907 | |
34 | GROMMET | 25-67272 | |
35 | GROMMET | 25-87743 | |
36 | SEAL | 67739 |
Cowl and Front Cover
Back to TopBelow is the parts list for Mercury V-175 Cowl and Front Cover:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1/10 | PORT/STBD. COWL Comment: (Black) SN# 4838073 & Below | 2151-6608A13 | |
1 | COWL ASSEMBLY, Port Comment: (Black) SN# 4838074 & Up | 2151-7620A4 | |
1 | COWL ASSEMBLY, Port Comment: (Gray) | 2151-7620A22 | |
1 | COWL ASSEMBLY, Port Comment: (Oyster) | 2151-9447A18 | |
2 | SEAL | 67260 | |
3 | PAD | 67258 | |
4 | BLANKET | 88227 | |
4A | SEAL, (3.20 Inch) Comment: (Oyster) | 193681 | |
5 | BRACKET, UPPER | 879871 | |
6 | BRACKET, LOWER | 879851 | |
7 | SCREW, (.312-18 x 1.00) | 10-37562 | |
8 | SHIELD Comment: (STARBOARD)(BLACK & GRAY) | 68049 | |
8 | SHIELD Comment: (PORT)(BLACK & GRAY) | 68048 | |
8 | SHIELD Comment: (STARBOARD)(OYSTER) | 680491 | |
8 | SHIELD Comment: (PORT)(OYSTER) | 680481 | |
9 | SCREW, (#10-16 x .625) | 10-48409 | |
9 | SCREW, (#10-16 x .750) | 10-57807 | |
9 | SCREW, (#10-16 X .50) | 10-35519 | |
10 | COWL ASSEMBLY, Starboard Comment: (Black) | 2150-7619A1 | |
10 | COWL ASSEMBLY, Starboard Comment: (Gray) | 2150-7619A5 | |
10 | COWL ASSEMBLY, Starboard Comment: (Oyster) | 2150-9452A3 | |
11 | BLANKET | 88227 | |
12 | SEAL | 99444 | |
12A | SEAL, (3.20 Inch) Comment: (Oyster) | 193681 | |
13 | BARREL | 62628 | |
14 | COWL LATCH ASSEMBLY | 46785A5 | |
15 | SCREW, (#10-32 x 0.875) | 10-31312 | |
16 | BAR | 15222 | |
17 | BARREL | 62629 | |
18 | SPRING | 24-62624 | |
19 | WASHER, (.192 x .375 x .0312) | 12-30164 | |
20 | NUT, | 10-32,11-859124 | 11-45812 |
21 | FRONT COVER Comment: (Black)(Use With Ref. #23) | 2149-5399A3 | |
21 | FRONT COVER Comment: (Gray)(Use With Ref. #23) | 2149-5399A16 | |
21 | COWL FRONT COVER ASSEMBLY Comment: (Black)(Use WithOut Ref. #23) | 2149-7532A2 | |
21 | COWL FRONT COVER ASSEMBLY Comment: (Gray)(Use WithOut Ref. #23) | 2149-7532A23 | |
21 | COWL FRONT COVER ASSEMBLY Comment: (Oyster)(Use WithOut Ref. #23) | 2149-7532A23 | |
22 | BLANKET | 67615 | |
23 | SHIELD Comment: (Use With Ref. #23) | 67261 | |
24 | SCREW, (#10-16 X .50) Comment: (Use With Ref. #23) | 10-35519 | |
25 | HOOK Comment: (Use With Ref. #23) | 61158T | |
25 | HOOK Comment: (Use WithOut Ref. #23) | 87907 | |
26 | SCREW Comment: (Use With Ref. #23) | 10-75162 | |
26 | SCREW, (#10-16 x .500) Comment: (Use WithOut Ref. #23) | 10-95700 | |
27 | EMERGENCY STARTER ROPE (MANUAL STARTING) | 47341A11 |
Cowls(Oyster - Bucket Style)
Back to TopBelow is the parts list for Mercury V-175 Cowls(Oyster - Bucket Style):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TOP COWL | 2194-9735A2 | |
2 | LOUVER ASSEMBLY | 18036A1 | |
3 | SCREW, (#10-16 x .625) | 10-48409 | |
4 | No Longer Available, Seal | NLA | |
5 | EMBLEM | 38-17996 | |
6 | EMBLEM | 37-179061 | |
7 | BRACKET ASSEMBLY Comment: (FRONT ) | 18189A1 | |
7 | BRACKET ASSEMBLY Comment: (REAR ) | 18190A1 | |
8 | GUIDE MOUNT | 18170A1 | |
9 | CLIP | 54-18193 | |
10 | BRACKET | 893763 | 18173 |
11 | LOCKWASHER, | 10-32,13-53166 | |
12 | NUT, (.312-18) | 11-82670910 | |
13 | SCREW, (.25-20 x .62) | 10-18192 | |
14 | NUT, (.250-20) | 11-8267098 | |
15 | BOTTOM COWL | 2194-9734T10 | |
16 | BRACKET | 18183 | |
17 | GROMMET | 25-18182 | |
18 | LATCH HANDLE ASSEMBLY | 18168A1 | |
19 | BUSHING | 23-812707 | 23-71984, 23-F286818, 23-F286828, F480818 |
20 | BUSHING | 23-18172 | |
21 | NUT | 11-18304 | |
22 | WAVE WASHER | 13-69708 | |
23 | HOOK | 18169 | |
24 | SCREW, (.250-20 x .620) | 10-28635 | |
25 | LOCKWASHER, (.250) | 13-26992 | |
26 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
27 | BRACKET | 994241 | |
28 | PLUG | 19-18219 | |
29 | GROMMET, (.88 Inside Diameter) | 25-13467 | |
30 | SCREW, (.250-20 x 2.00) | 10-70732 | |
31 | WASHER | 12-69057 | |
32 | WASHER, (.255 x .620 x .030) | 12-35280 | |
33 | BUSHING | 23-18194 | |
34 | GROMMET | 25-88033 | |
35 | WASHER | 12-26907 | |
36 | CLAMP | 54-18479 | |
37 | SCREW, (.250-20 x .620) | 10-28635 | |
38 | LOCKWASHER, (.250) | 13-26992 | |
39 | SEAL | 67260 | |
40 | RETAINER | 99391 | |
41 | PLATE | 88622 | |
42 | SCREW, (.190-24 x 1.00) | 10-68918 | |
43 | RETAINER | 99447 | |
44 | TRIM COVER | 18037T10 | |
45 | SCREW, (10-32 x .75) | 10-18124 | |
46 | WASHER, (.203 x .406 x .040) | 12-89302 | |
47 | NUT, | 10-32,11-8M0204718 | |
48 | FITTING | 22-18195 | |
49 | FUEL LINE, (57.00 Inches Bulk) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
50 | TEE | 22-90824001 | |
51 | CABLE TIE, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
52 | CLAMP, Nylon | 54-4158210 |
Crankshaft, Pistons and Connecting Rods
Back to TopBelow is the parts list for Mercury V-175 Crankshaft, Pistons and Connecting Rods:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CRANKSHAFT ASSEMBLY | 455-8745T5 | |
2 | BEARING, Ball (LOWER) | 30-67923T | |
3 | RING | 53-67446 | |
4 | DRIVE GEAR Comment: (OIL INJECTION) | 43-99727A1 | |
5 | CARRIER ASSEMBLY | 54196A6 | |
6 | PACKING | 65800 | |
7 | RING, SEALING Comment: (.124 THICK) | 39-67377T | |
7 | RING, SEALING Comment: (.139 THICK) | 39-78633 | |
8 | ROLLER BEARING Comment: (1 PIECE) | 31-93495T | |
8 | ROLLER BEARING Comment: (2 PIECE) | 31-88903T | |
8 | ROLLER BEARING Comment: (2 PIECE) | 31-67445 | |
9 | RETAINING RING | 53-67444 | |
10 | PISTON ASSEMBLY Comment: (Starboard-Standard) SN# 6618751 & Up | 766-8666T41 | |
10 | No Longer Available, Piston Assembly Comment: (Starboard-.030 Oversize SN# 6618751 & Up | NLA | |
10 | PISTON ASSEMBLY Comment: (Port-Standard) SN# 6618751 & Up | 766-8667T41 | |
10 | No Longer Available, Piston Assembly Comment: (Port-.030 Oversize) SN# 6618751 & Up | NLA | |
10 | PISTON Comment: (Starboard-Standard) SN# 6618750 & Below | 765-7441T36 | |
10 | PISTON Comment: (Starboard-.015 Oversize SN# 6618750 & Below | 765-7443A12 | |
10 | PISTON Comment: (Starboard-.030 Oversize) SN# 6618750 & Below | 765-7445A12 | |
10 | PISTON Comment: (Port-Standard) SN# 6618750 & Below | 765-7442T36 | |
10 | PISTON Comment: (Port-.015 Oversize) SN# 6618750 & Below | 765-7444A12 | |
10 | PISTON Comment: (Port-.030 Oversize) SN# 6618750 & Below | 765-7446T12 | |
11 | PISTON RING Comment: (Standard) SN# 6618751 & Up | 39-813011A12 | 39-78996A12 (Standard) SN# 6618751 & Up |
11 | PISTON RING Comment: (.030 Oversize) SN# 6618751 & Up | 39-90264A4 | |
11 | PISTON RING Comment: (Standard-Use with 2 Ring Piston)(See Note #1 On Illustration) SN# 6618750 & Below | 39-78807A12 | |
11 | PISTON RING Comment: (Standard-Use with 3 Ring Piston)(See Note #1 On Illustration) SN# 6618750 & Below | 39-67376A12 | |
11 | PISTON RING Comment: (Standard)(See Note #2 On Illustration) SN# 6618750 & Below | 39-93481A12 | |
11 | PISTON RING Comment: (.015 Oversize) SN# 6618750 & Below | 39-78918A4 | |
11 | PISTON RING Comment: (.030 Oversize) SN# 6618750 & Below | 39-85636A4 | |
12 | RING, Lock | 53-857196 | 40-52035 |
13 | CONNECTING ROD ASSEMBLY | 636-8119A6 | |
14 | SCREW, (.3125-28 X .875) | 10-93886 | |
14 | SCREW, (.3125-24 X 1.00) | 10-76349 | |
15 | WASHER | 12-8M0032839 | 12-47247 |
16 | BEARING KIT | 8M0234886 | |
17 | NEEDLE BEARING | 29-67483 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Cylinder Block and End Caps
Back to TopBelow is the parts list for Mercury V-175 Cylinder Block and End Caps:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CYLINDER BLOCK Comment: SN# 6618750 & Below | 858-8134A3 | |
1 | CYLINDER BLOCK Comment: SN# 6618751 & Up | 858-8712A39 | |
2 | STUD (1-718") | 16-76175 | |
3 | STUD Comment: (5-1/2") | 16-670654 | |
3 | STUD Comment: (6-3/4") | 16-8M0034454 | 16-78438 5 (6-3/4") |
4 | PIN, Dowel | 17-43044 | |
5 | PIN (BEARING RACE) | 17-8M0036405 | 17-67296 |
6 | GASKET | 27-11338 | |
7 | COVER, STARTER MOTOR (UPPER) | 8M0088723 | 42249 1 |
8 | SCREW, (.312-18 x 1.50) | 10-73657 | |
9 | LOCKWASHER, (.312) | 13-8M0204647 | |
10 | COVER, STARTER MOTOR (LOWER) | 76867 | |
11 | SCREW, .312-18 x 2.00 | 10-815549 | 10-25503, 10-77065 |
11A | BUSHING | 23-99448 | |
12 | SCREW, (.375-16 x 3.250), CRANKCASE TO CYLINDER BLOCK | 10-66717 | |
12 | SCREW, (.312-18 x 1.250), CRANKCASE TO CYLINDER BLOCK | 10-74824 | |
13 | END CAP ASSEMBLY (UPPER) Comment: SN# 6618750 & Below | 1159-8454T1 | |
13 | END CAP ASSEMBLY Comment: SN# 6618751 & Up | 1159-8454T2 | |
14 | O-RING Comment: (2.80 Outside Diameter) SN# 6618750 & Below | 25-54029 | |
14 | O-RING Comment: (2.9 Outside Diameter) SN# 6618750 & Below | 25-67206 | |
14 | O-RING Comment: SN# 6618751 & Up | 25-54029 | |
15 | ROLLER BEARING Comment: SN# 6618750 & Below | 31-74248T | |
15 | ROLLER BEARING Comment: SN# 6618751 & Up | 31-93496T | |
16 | SEAL | 26-41953 | |
17 | SCREW WITH LOCKWASHER, (.312-18 x 1.00) | 10-30225 | |
18 | SCREW, (.190-24 x .19) | 10-24220 | |
19 | PLUG, (.500-14) (WATER JACKET) | 22-38407 | |
20 | STUD (1-7/8") | 16-15094 | |
21 | STUD, (#10-32 x 1.00) | 16-8M0034435 | 16-15093 |
22 | SPACER | 23-67269 | |
23 | WASHER | 12-8M0204663 | |
24 | WASHER | 12-72761 | |
25 | NUT | 11-816874 | 11-73651, 11-816873, 11-90052 |
26 | BRACKET, FLYWHEEL COVER | 422482 | |
27 | SCREW, (.250-20 x .750) | 10-49668 | |
28 | END CAP ASSEMBLY (LOWER) | 1156-7809T1 | |
29 | O-RING, (3.250 Inside Diameter) | 25-62700 | |
29 | O-RING Comment: (3-1/2" I.D.) | 25-67207 | |
30 | SEAL | 26-41953 | |
31 | SCREW, (.250-20 x .750) | 10-28636 | |
32 | LOCKWASHER, (.250) | 13-26992 | |
33 | SCREW, (.250-20 x 2.125) | 10-64022 | |
34 | NUT, ( #8-32) | 11-64015 | |
35 | CAP | 26852 | |
- | RESTRICTOR | 66517 | |
- | POWERHEAD ASSEMBLY, COMPLETE Comment: SN# 6618750 & Below | 41278A81 | |
- | POWERHEAD ASSEMBLY, COMPLETE Comment: SN# 6618751 & Up | 12305T88 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Cylinder Head
Back to TopBelow is the parts list for Mercury V-175 Cylinder Head:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CYLINDER HEAD Comment: (DESIGN I) | 79715 | |
2 | GASKET Comment: (DESIGN I) | 27-795831 | |
3 | SCREW (2-1/2") Comment: (DESIGN I) | 10-668631 | |
4 | COVER Comment: (DESIGN I) | 1026-7270A1 | |
5 | GASKET Comment: (DESIGN I) | 27-65788 | |
6 | SCREW, (.312-18 x 1.00) Comment: (DESIGN I) | 10-35386 | |
6 | SCREW, (.312-18 x 1.250) Comment: (DESIGN I) | 10-74824 | |
7 | J CLIP Comment: (DESIGN I) | 54-47483 | |
8 | THERMOSTAT Comment: (DESIGN I) | 75692 | |
9 | GASKET Comment: (DESIGN I) | 27-8M0204714 | |
10 | COVER KIT Comment: (DESIGN I) | 90390A1 | |
11 | SCREW Comment: (2"-FLANGED HEAD)(DESIGN I) | 10-66023 | |
11 | SCREW, .312-18 x 2.00 Comment: (DESIGN I) | 10-815549 | 10-25503, 10-77065 (DESIGN I) |
11 | SCREW, (.312-18 x 1.00) Comment: (DESIGN I) | 10-35386 | |
12 | FITTING Comment: (DESIGN I) | 22-68728 | |
13 | HOSE, (24.500 Inches Bulk) Comment: (DESIGN I) | 32-77653101 | |
14 | FITTING, (.250-18 Brass) Comment: (DESIGN I) | 22-687271 | |
15 | CABLE TIE, (14.00 Inches) Comment: (DESIGN I) | 61990 | |
16 | TEMPERATURE SENDER, (19.50 Inch) Comment: (DESIGN I) | 78799 | |
18 | COVER Comment: (DESIGN I) | 71162 | |
19 | TERMINAL BLOCK Comment: (DESIGN I) | 86-45915 | |
20 | SCREW, (#10-16 x .440) Comment: (DESIGN I) | 10-69079 | |
21 | CYLINDER HEAD Comment: (1 Piece Design)(DESIGN II) | 15221A5 | |
22 | RETAINER Comment: (Use With Ref. #21)(DESIGN II) | 137151 | |
23 | SCREW, (.312-18 x .500) Comment: (Use With Ref. #21)(DESIGN II) | 10-98257 | |
24 | TEMPERATURE SENSOR Comment: (Use With Ref #21)(DESIGN II) | 13536A7 | |
25 | CYLINDER HEAD Comment: (2 Piece Design)(DESIGN II) | 96532 | |
26 | GASKET Comment: (2 Piece Design)(DESIGN II) | 27-96278 | |
27 | COVER Comment: (2 Piece Design)(DESIGN II) | 96283 | |
28 | SCREW, (.312-18 x 1.250) Comment: (2 Piece Design)(DESIGN II) | 10-74824 | |
29 | GASKET Comment: (DESIGN II) | 27-41247T01 | |
30 | SCREW, (.375-16 X 2.30) Comment: (DESIGN II) | 10-98534 | |
31 | WASHER, (.406 x .812 x .065) Comment: (DESIGN II) | 12-25909 | |
32 | THERMOSTAT Comment: (DESIGN II) | 75692 | |
33 | GASKET Comment: (DESIGN II) | 27-8M0204714 | |
34 | COVER KIT Comment: (DESIGN II) | 90390A1 | |
35 | SCREW, .312-18 x 2.00 Comment: (Not Used With Ref. #21)(DESIGN II) | 10-815549 | 10-25503, 10-77065 (Not Used With Ref. #21)(DESIGN II) |
35 | SCREW, (.312-18 x 1.00) Comment: (Qty. Of 4 Used With Ref. #21)(DESIGN II) | 10-35386 | |
36 | FITTING, (.250-18 Brass) Comment: (DESIGN II) | 22-687271 | |
37 | HOSE, (24.500 Inches Bulk) Comment: (DESIGN II) | 32-77653101 | |
38 | FITTING Comment: (DESIGN II) | 22-68728 | |
39 | CABLE TIE, (8.00 Inches) Comment: (DESIGN II) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 (DESIGN II) |
40 | TEMPERATURE SENDER Comment: (DESIGN II) | 97465 | |
41 | COVER Comment: (Not Used With Ref. #21)(DESIGN II) | 96282 | |
42 | TEMPERATURES SENDER Comment: (OYSTER) | 187531 | |
43 | CABLE Comment: (OYSTER) | 84-88824A8 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Divider Plate and Exhaust Plate
Back to TopBelow is the parts list for Mercury V-175 Divider Plate and Exhaust Plate:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GASKET Comment: (Ref. # 2 Casting # 99169) | 27-904841 | |
2 | PLATE Comment: (Ref. # 2 Casting # 99169) | 99169A1 | |
3 | SEAL Comment: (Ref. # 2 Casting # 99169) | 26-814754 | 42838 1, 69668, 88726 (Ref. # 2 Casting # 99169) |
4 | COVER Comment: (Ref. # 2 Casting # 99169) | 95067 | |
5 | SCREW, (.312-18 x 1.250) (1-1/4") Comment: (Ref. # 2 Casting # 99169) | 10-74824 | |
6 | GASKET Comment: (Ref. # 7 Casting # 76637 or 78305) | 27-76636 | |
6 | GASKET Comment: (Ref. # 7 Casting #87321) | 27-904841 | |
7 | DIVDER PLATE Comment: (Ref. # 7 Casting # 76637) | 76637A1 | |
7 | DIVIDER PLATE Comment: (Ref. # 7 Casting # 78305) | 78305A1 | |
7 | PLATE Comment: (Ref. # 7 Casting # 87321) | 87321T | |
8 | SEAL | 26-814754 | 42838 1, 69668, 88726 |
9 | COVER Comment: (Ref. # 7 Casting # 76637 or 78305) | 67340 | |
9 | COVER Comment: (Ref. # 7 Casting # 87321) | 95067 | |
10 | SCREW, (.312-18 x 1.00) Comment: (Ref. # 7 Casting # 76637 or 78305) | 10-35386 | |
10 | SCREW, (.312-18 x 1.250) Comment: (Ref. # 7 Casting # 87321) | 10-74824 | |
11 | WASHER Comment: (Ref. # 7 Casting # 76637 or 78305) | 12-73595 | |
11 | J CLIP Comment: (Ref. # 7 Casting # 87321) | 54-47483 | |
18 | GASKET Comment: SN# 6618750 & Below | 27-75909 | |
18 | GASKET Comment: (Black and Gray) SN# 6618751 & Up | 27-991764 | |
18 | GASKET Comment: (Oyster) | 27-997761 | |
19 | EXHAUST PLATE Comment: SN# 6618750 & Below | 75836A1 | |
19 | PLATE ASSEMBLY Comment: (Black and Gray) SN# 6618751 & Up | 41944A5 | |
19 | EXHAUST PLATE Comment: (Oyster) | 41944A5 | |
20 | ELBOW | 22-996642 | |
21 | SEAL | 707482 | |
22 | BRACKET | 680101 | |
23 | SCREW, (#10-16 x .500) | 10-48408 | |
24 | PIN, Dowel | 17-43044 | |
25 | WASHER, (.406 x .734 x .063) | 12-20553 | |
26 | NUT, (.375-24) | 11-8M0204726 | |
27 | BUSHING | 23-27132 | |
28 | SCREW, (.312-18 x 1.250) | 10-66727 | |
29 | SCREW, (.312-18 x 2.50) | 10-68783 | |
30 | SCREW, (.375-16 x 3.50) | 10-898833 | 10-66725 |
31 | GROMMET | 25-12602002 | |
32 | MOUNT | 90435 | |
33 | WASHER | 12-21249 | |
34 | NUT, (.250-28) | 11-8267089 | |
35 | CHECK VALVE Comment: SN# 6618751 & Up | 21-42657A3 | |
36 | PLATE Comment: (Oyster) | 181032 | |
37 | GROMMET Comment: (Oyster) | 25-93221002 | |
38 | SCREW, (.250-20 x .750) Comment: (Oyster) | 10-28636 | |
39 | WASHER, (.281 x .500 x .060) Comment: (Oyster) | 12-8M0204649 | |
40 | NUT, (.250-20) Comment: (Oyster) | 11-8267098 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Driveshaft Housing and Exhaust tube
Back to TopBelow is the parts list for Mercury V-175 Driveshaft Housing and Exhaust tube:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | DRIVESHAFT HOUSING Comment: (Black) SN# Mercury-5393736/Mariner-5316380 & Below | 1579-7315A7 | |
1 | DRIVESHAFT HOUSIG ASSEMBLY Comment: (Black) SN# Mercury-5393737/Mariner-5316381 & Up | 1590-8343A7 | |
1 | DRIVESHAFT HOUSING ASSEMBLY Comment: (Gray) SN# Mercury-5393737/Mariner-5316381 & Up | 1590-8343A8 | |
1 | DRIVESHAFT HOUSING ASSEMBLY Comment: (Oyster) | 1590-8343A8 | |
2 | STUD, (.437 x 2.69) Comment: (LONG SHAFT) | 16-56295 | |
2 | STUD Comment: (X-LONG SHAFT) | 16-74732 | |
3 | BUMPER | 25067 | |
4 | SCREW, (.500-20 x 6.00) | 10-898831 | 10-63474 |
5 | MOUNT, LOWER | 78249 | |
5 | MOUNT Comment: (HEAVY DUTY) | 77327 | |
6 | WASHER, (.8125) | 12-49339 | |
7 | NUT | 11-25096 | |
8 | GROUND WIRE ASSEMBLY | 88238A10 | |
9 | CLAMP | 54-8M0036782 | 54-67076 |
10 | SCREW, (.312-18 x 1.250) | 10-66727 | |
11 | COVER Comment: (BLACK) | 100-8M4500752 | 8M0001130, 67077T (BLACK) |
11 | COVER Comment: (GRAY) | 67077F1 | |
11 | COVER Comment: (OYSTER) | 67077F1 | |
12 | SCREW, (#12-24 x .620) | 10-88417 | |
13 | NUT | 11-35521 | |
14 | STRAP | 67703 | |
15 | SCREW, (.375-24 X 4.00) Comment: (OLD DESIGN) | 10-67769 | |
16 | NUT Comment: (OLD DESIGN) | 11-25269 | |
17 | WASHER | 12-73862 | |
18 | NUT | 11-29489 | |
19 | WASHER, (.453 x .812 x .105) | 12-45176 | |
20 | NUT, (.437-20) | 11-8M0204653 | |
21 | PLUG Comment: (BLACK/GRAY) | 19-64649 | |
21 | PLUG Comment: (OYSTER) | 19-646491 | |
22 | EXHAUST TUBE Comment: SN# Mercury-5393736/Mariner-5316380 & Below | 67075 | |
22 | EXHAUST TUBE Comment: SN# Mercury-5393737/Mariner-5316381 & Up | 89743 | |
23 | SEAL (LOWER) | 66350001 | |
24 | SEAL (UPPER) Comment: SN# Mercury-5393737/Mariner-5316381 & Up | 86027 | |
25 | TUBE Comment: (LONG SHAFT) | 32-8M0042788 | 32-859097 1 (LONG SHAFT) |
25 | TUBE Comment: (X-LONG SHAFT) | 32-8M0042790 | 32-859097 2 (X-LONG SHAFT) |
26 | GASKET | 27-991734 | |
27A | PLATE ASSEMBLY Comment: (DESIGN I) | 75838A1 | |
27B | PLATE ASSEMBLY Comment: (DESIGN II) | 86586A1 | |
27 | PLATE ASSEMBLY Comment: (DESIGN III) | 41945A6 | |
28 | SEAL | 707482 | |
29 | BRACKET | 68011 | |
30 | SCREW, (#10-16 x .500) | 10-48408 | |
31 | PIN, Dowel | 17-43044 | |
32 | SEAL | 26-38970 | |
32A | SCREW, (.250-20 x .750) | 10-90192 | |
33 | GASKET Comment: SN# 6618751 & Up | 27-991772 | |
33A | GASKET Comment: SN# 6618750 & Below | 27-75786 | |
34 | WASHER, (.406 x .734 x .063) | 12-20553 | |
35 | NUT | 11-69254 | |
36 | EXH. EXTENSION | 879288T71 | 41942 4 |
38 | STUD | 16-66021 | |
39 | WASHER | 12-20533 | |
40 | NUT, (.250-28) | 11-30506 | |
41 | GROUND STRAP Comment: (NEW DESIGN) | 88238A10 | |
42 | SCREW, (.250-20 x .500) Comment: (NEW DESIGN) | 10-41508 | |
43 | BOOT Comment: (OLD DESIGN) | 65638 | |
-- | SPACER ASSEMBLY Comment: (X-LONG SHAFT) | 78148A1 | |
-- | PIN, Dowel Comment: (X-LONG SHAFT) | 17-43044 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Flywheel, Starter Motor and Ignition Coils
Back to TopBelow is the parts list for Mercury V-175 Flywheel, Starter Motor and Ignition Coils:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | COVER KIT | 79918A1 | |
2 | MARKER | 79022 | |
3 | SCREW, (.190-32 x .380) | 10-37572 | |
4 | WASHER | 12-72761 | |
5 | PLUG | 19-89219001 | |
6 | PLUG, Yellow | 19-45907 | |
7 | NUT, (.625-18) | 11-52901 | |
8 | WASHER | 12-33001 | |
9 | No Longer Available, Flywheel Comment: (Use With 50-64975 or 50-72467) | NLA | |
9 | FLYWHEEL Comment: (Use With 50-77141 or 50-79472 )(Lamination Thickness is 1/2 Inch) | 271-859238A9 | |
9 | FLYWHEEL Comment: (Lamination Thickness is 5/8 Inch) | 271-859238A9 | |
10 | SCREW, (.250-28 x .625) | 10-32417 | |
11 | SCREW, (.3125-24 X .75) | 10-68997 | |
12 | STATOR ASSEMBLY Comment: (Use W/O Voltage Regulator - 9 AMP) | 398-5454A7 | |
12 | STATOR Comment: (Use W/Voltage Regulator - 15 AMP)(Use With Flywheel Lamination Thickness of 1/2 Inch) | 398-5454A32 | |
12 | STATOR Comment: (Use W/Voltage Regulator - 15 AMP)(Use With Flywheel Lamination Thickness of 5/8 Inch) | 398-5454A35 | |
13 | SCREW, (#10-24 x .880) | 10-75840 | |
13 | SCREW, (#10-24 x 1.00) | 10-19926100 | |
14 | LOCKWASHER, | 10,13-26996 | |
15 | TRIGGER PLATE ASSEMBLY | 96455A9 | |
16 | J CLIP | 54-61001 | |
17 | STARTER MOTOR Comment: (AMER. BOSCH #10652-21-M030SM) | 50-898265010 | 50-72467 (AMER. BOSCH #10652-21-M030SM) |
17 | STARTER MOTOR Comment: (AMER. BOSCH #17183-28-M030SM) | 50-893893 | 50-79472T 2, 50-79472 2 (AMER. BOSCH #17183-28-M030SM) |
17 | STARTER MOTOR Comment: (AMER. BOSCH #14916-240M030SM) | 50-893893 | 50-79472T 2, 50-79472 2 (AMER. BOSCH #14916-240M030SM) |
17 | STARTER MOTOR ASSEMBLY Comment: (PRESTOLITE #MJL-4003B) | 50-898265010 | 50-72467 (PRESTOLITE #MJL-4003B) |
18 | COLLAR | 23-8M0034918 | 23-8M0001391, 56703 |
19 | STOP | 8M0043376 | 68042 |
20 | LOCKWASHER, (.250) | 13-26992 | |
21 | NUT, (.250-20) | 11-20890 | |
22 | WIRE, (Yellow)(6.50 Inches) | 84-93389A5 | |
22 | WIRE, (Black) | 84-93388A14 | |
23 | SCREW AND LOCKWASHER, (.250-20 x .625) SS | 10-69035 | |
24 | CABLE ASSEMBLY, Black | 84-93388A1 | |
25 | IGNITION COIL ASSEMBLY Comment: (ORANGE) | 300-8M0166172 | |
25 | IGNITION COIL ASSEMBLY Comment: (NAVY BLUE) | 339-832757A4 | |
26 | COVER | 67614 | |
27 | SCREW, (.190-32 x 1.62) | 10-88447 | |
28 | NUT, | 10-32,11-45076 | |
29 | WIRE, (3.50 Inches) Black | 84-88807A6 | |
29 | CABLE ASSEMBLY, Black (2.50 Inches) | 84-60466A1 | |
30 | SCREW, (#10-32 x .375) | 10-68513 | |
31 | LEAD WIRE | 84-813715A1 | |
32 | BOOT KIT | 85-63709A1 | |
33 | SPARK PLUG Comment: (NGK-BUHW) | 33-896329827 | 33-827C (NGK-BUHW) |
33 | SPARK PLUG Comment: (NGK-BUSH) | 33-13686Q | |
34 | HARNESS ASSEMBLY, COIL TO SWITCH BOX Comment: (#2, 4 & 6) | 84-69738A7 | |
34 | HARNESS, COIL TO SWITCH BOX Comment: (#1, 3 & 5) | 84-69739A2 | |
35 | WASHER, (.192 x .375 x .0312) | 12-30164 | |
36 | SPACER | 23-56774 |
Fuel Pump(Design I W/O Inline Filter)
Back to TopBelow is the parts list for Mercury V-175 Fuel Pump(Design I W/O Inline Filter):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
4 | FITTING, FUEL INLET - UPPER AND LOWER | 1395-6232 | |
5 | FITTING, FUEL INLET - MIDDLE | 22-70007 | |
6 | GASKET Comment: SN# Mercury 5488751/Mariner 6618750 & Below | 27-677511 | |
6 | GASKET Comment: SN# Mercury 5488752/Mariner 6618751 & Up | 27-904301 | |
7 | NUT | 11-8M0207775 | |
8 | FUEL LINE, (57.00 Inches Bulk), CARB TO FUEL PUMP | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
9 | CLAMP, FUEL HOSE | 54-68424 | |
10 | SPRING, FUEL LINE | 24-89808 | |
11 | ENRICHNER VALVE | 42859A2 | |
12 | CONNECTOR, BOTTOM (Old Design Enrichner Valve) | 22-90275 | |
13 | CONNECTOR, (90 Degree), SIDE (Old Design Enrichner Valve) | 22-73817 | |
14 | CLAMP, ENRICHNER VALVE Comment: (NEW DESIGN ) | 54-633003 | |
14A | BRACKET, ENRICHNER VALVE Comment: (OLD DESIGN) | 90345 | |
15 | SCREW, (.250-20 x .500), VALVE CLAMP | 10-73286 | |
17 | TERMINAL BLOCK | 86-45915 | |
18 | SCREW, (#10-16 X .50) | 10-35519 | |
19 | HOSE Comment: (.077 I.D.) | 32-9938779 | |
19 | TUBING, (20.00 Feet Bulk) Comment: (.092 I.D.) | 32-892024122 | 32-99130122 (.092 I.D.) |
20 | TUBING, (36.00 Inches Bulk), CARBURETOR TO CARBURETOR | 32-9912688 | |
21 | J CLIP | 54-47483 | |
22 | SCREW, (.312-18 x .500) | 10-88743 | |
23 | FUEL PUMP ASSEMBLY | 13453A1 | |
24 | CHECK VALVE ASSEMBLY | 21-30430A8 | |
25 | DIAPHRAGM ASSEMBLY | 89031A2 | |
26 | NOT SOLD SEPARATE, Gasket | NSS | |
27 | NOT SOLD SEPARATE, Gasket | NSS | |
28 | NOT SOLD SEPARATE, Gasket | NSS | |
29 | NOT SOLD SEPARATE, Gasket | NSS | |
30 | SCREEN | 35-59072 | |
31 | O-RING, (1.237 x .103) | 25-35480 | |
32 | NOT SOLD SEPARATE, Gasket | NSS | |
33 | COVER, FUEL FILTER | 35-91078A1 | |
34 | SCREW, (#10-32 x .620) | 10-89766 | |
35 | FITTING Comment: (NON OIL INJECTION) | 22-64705 | |
35 | FITTING, (45 Degree Elbow) Comment: (NON OIL INJECTION) SN# 5875203 & Below | 22-8M0123050 | |
35 | FITTING Comment: (OIL INJECTION) | 22-70007 | |
36 | SCREW, (.190-32 x 1.62) | 10-88447 | |
37 | LOCKWASHER, | 10,13-26996 | |
38 | RETAINER | 23004 | |
39 | SCREW, (#6-32 X .50) | 10-43723 | |
40 | BASE | 67623 | |
41 | PULSE CHAMBER Comment: SN# Mercury 5393736/Mariner 5316380 & Below | 79826 | |
41 | CHAMBER Comment: SN# Mercury 5393737/Mariner 5316381 & Up | 86449 | |
42 | SPRING | 24-86207 | |
43 | RETAINER | 86026 | |
44 | CAP | 86252 | |
45 | FITTING, FUEL OUTLET | 22-67620 | |
46 | FUEL LINE, (57.00 Inches Bulk), INLET Comment: (NON OIL INJECTION) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 (NON OIL INJECTION) |
46 | FUEL LINE ASSEMBLY Comment: (NON OIL INJECTION) SN# 5875203 & Below | 32-877682Q8 | |
47 | FITTING, (.250-18), FUEL LINE (90 DEG.) | 22-920071 | |
48 | SEAL | 92037 | |
49 | ADAPTOR | 30186 | |
49 | BAYONET ASSEMBLY, Fuel Comment: SN# 5875203 & Below | 30185Q3 | |
50 | SCREW, (.250-20 x 1.250) | 10-76596 | |
50 | SCREW Comment: (1/4-28) | 10-69224 | |
51 | LOCKWASHER, (.250) | 13-26992 | |
52 | STEM | 30187 | |
53 | O-RING | 25-16524 | |
54 | SPRING | 24-30189 | |
55 | WASHER | 30188 | |
56 | SCREW, VALVE TO BRACKET Comment: SN# USA-5875204/AUS-8072023 & Up | 10-89075 | |
57 | SCREW, (.250-20 x .500), VAVLE BRACKET Comment: SN# USA-5875204/AUS-8072023 & Up | 10-73286 | |
57 | SCREW, (.25-20 X 1.375), VALVE BRACKET Comment: SN# USA-5875204/AUS-8072023 & Up | 10-69067 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Fuel Pump(Design II With Inline Filter)
Back to TopBelow is the parts list for Mercury V-175 Fuel Pump(Design II With Inline Filter):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
4 | FITTING, FUEL INLET - UPPER AND LOWER | 1395-6232 | |
5 | FITTING, FUEL INLET - MIDDLE | 22-70007 | |
6 | GASKET | 27-904301 | |
7 | NUT, CARBURETOR MOUNTING | 11-8M0207775 | |
8 | CABLE TIE, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
9 | ENRICHNER VALVE | 42859A2 | |
10 | CLAMP | 54-633001 | |
11 | SCREW, (.250-20 x .500) | 10-73286 | |
12 | TERMINAL BLOCK | 86-45915 | |
13 | SCREW, (#10-16 X .50) | 10-35519 | |
14 | TUBING, (20.00 Feet Bulk) | 32-892024122 | 32-99130122 |
15 | TUBING, (36.00 Inches Bulk), CARBURETOR TO CARBURETOR | 32-9912688 | |
18 | FUEL PUMP ASSEMBLY | 13453A1 | |
19 | CHECK VALVE ASSEMBLY | 21-30430A8 | |
20 | DIAPHRAGM ASSEMBLY | 89031A2 | |
21 | NOT SOLD SEPARATE, Gasket | NSS | |
22 | NOT SOLD SEPARATE, Gasket | NSS | |
23 | NOT SOLD SEPARATE, Gasket | NSS | |
24 | NOT SOLD SEPARATE, Gasket | NSS | |
25 | SCREEN | 35-59072 | |
26 | O-RING, (1.237 x .103) | 25-35480 | |
27 | NOT SOLD SEPARATE, Gasket | NSS | |
28 | COVER, FUEL FILTER | 35-91078A1 | |
29 | SCREW, (#10-32 x .620) | 10-89766 | |
30 | FITTING (45 DEG.) | 22-70007 | |
31 | SCREW, 10-32 x 1.50 | 10-73013 | |
32 | LOCKWASHER, | 10,13-26996 | |
33 | RETAINER | 23004 | |
34 | SCREW, (#6-32 X .50) | 10-43723 | |
35 | BASE | 67623 | |
36 | CHAMBER | 86449 | |
37 | SPRING | 24-86207 | |
38 | RETAINER | 86026 | |
39 | CAP | 86252 | |
40 | FUEL LINE, (57.00 Inches Bulk), INLET | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
41 | FITTING, (.250-18), FUEL LINE (90 DEG.) | 22-920071 | |
42 | SEAL | 92037 | |
43 | ADAPTOR | 30186 | |
44 | SCREW, (.25-20 X 1.375) | 10-69067 | |
46 | STEM | 30187 | |
47 | O-RING | 25-16524 | |
48 | SPRING | 24-30189 | |
49 | WASHER | 30188 | |
50 | FITTING | 22-19688 | |
51 | FUEL LINE, (57.00 Inches Bulk) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
52 | FUEL FILTER | 35-816296Q03 | 35-816296Q, 35-816296, 35-16494 |
53 | CLAMP | 54-26404 | |
54 | SCREW, (.190-24 X .50) | 10-78291 | |
55 | LOCKWASHER, | 10,13-26996 | |
56 | C WASHER | 8M0084613 | 69205 |
57 | FITTING | 22-70007 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Fuel Pump(Design III Square Fuel Pump)
Back to TopBelow is the parts list for Mercury V-175 Fuel Pump(Design III Square Fuel Pump):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
4 | FITTING, FUEL INLET - UPPER AND LOWER | 1395-6232 | |
5 | FITTING, FUEL INLET - MIDDLE | 22-70007 | |
6 | GASKET | 27-904301 | |
7 | NUT, CARBURETOR MOUNTING | 11-8M0207775 | |
8 | CABLE TIE, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
9 | ENRICHNER VALVE | 42859A2 | |
10 | CLAMP | 54-633001 | |
11 | SCREW, (.250-20 x .500) | 10-73286 | |
12 | TERMINAL BLOCK | 86-45915 | |
13 | SCREW, (#10-16 X .50) | 10-35519 | |
14 | TUBING, (20.00 Feet Bulk) | 32-892024122 | 32-99130122 |
15 | TUBING, (36.00 Inches Bulk), CARBURETOR TO CARBURETOR | 32-9912688 | |
16 | FUEL PUMP ASSEMBLY | 15930A15 | |
17 | DIAPHAGM KIT | 21-857005A1 | |
18 | NOT SOLD SEPARATE, Check Valve | NSS | |
19 | NOT SOLD SEPARATE, Gasket-Boost | NSS | |
20 | NOT SOLD SEPARATE, Diaphragm | NSS | |
21 | NOT SOLD SEPARATE, Gasket-Pulse | NSS | |
22 | NOT SOLD SEPARATE, Spring | NSS | |
23 | NOT SOLD SEPARATE, Cap | NSS | |
24 | NOT SOLD SEPARATE, Check Valve | NSS | |
25 | NOT SOLD SEPARATE, Retainer | NSS | |
26 | NOT SOLD SEPARATE, Spring | NSS | |
27 | NOT SOLD SEPARATE, Cap | NSS | |
28 | GASKET, BASE | 27-8M0204705 | |
29 | BASE | 144303 | |
30 | PLATE | 987752 | |
31 | PLUG, Pipe (.0625-27) | 22-56800 | |
32 | FITTING | 22-19688 | |
33 | SCREW, (#12-24 x 2.00) | 10-16452 | |
34 | SCREW, (M5 x 40) | 10-4000310 | |
35 | WASHER | 12-4002314 | |
36 | FITTING | 22-14868 | |
37 | FITTING | 22-19688 | |
38 | FUEL LINE, (57.00 Inches Bulk) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
39 | FUEL FILTER | 35-816296Q03 | 35-816296Q, 35-816296, 35-16494 |
40 | CLAMP | 54-15279 | |
41 | FITTING | 22-64705 | |
42 | TUBING | 32-8M0108349 | 32-8M0047448, 32-830757130, 32-830757 80 |
43 | TEE | 22-424253 | |
44 | ELBOW Comment: (BLACK & GRAY) | 22-36221 | |
45 | ADAPTOR Comment: (BLACK & GRAY) | 30186 | |
46 | STEM Comment: (BLACK & GRAY) | 30187 | |
47 | SPRING Comment: (BLACK & GRAY) | 24-30189 | |
48 | O-RING Comment: (BLACK & GRAY) | 25-16524 | |
49 | WASHER Comment: (BLACK & GRAY) | 30188 | |
50 | SCREW, (.25-20 X 1.375) Comment: (BLACK & GRAY) | 10-69067 | |
51 | SEAL Comment: (BLACK & GRAY) | 92037 | |
52 | TUBING Comment: (BLACK & GRAY) | 32-8M0108349 | 32-8M0047448, 32-830757130, 32-830757 80 (BLACK & GRAY) |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 |
Gear Housing(Drive) 1.86:1 Ratio-15 Teeth Pinion Gear
Back to TopBelow is the parts list for Mercury V-175 Gear Housing(Drive) 1.86:1 Ratio-15 Teeth Pinion Gear:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
0 | GEAR HOUSING Comment: (LONG)(BLACK) | 1647-9148T84 | |
0 | GEAR HOUSING Comment: (LONG)(GRAY) | 1647-9148T84 | |
0 | GEAR HOUSING Comment: (X-LONG)(BLACK) | 1647-9148T85 | |
0 | GEAR HOUSING Comment: (X-LONG)(GRAY) | 1647-9148T91 | |
0 | GEAR HOUSING Comment: (X-LONG)(OYSTER) | 1647-9148T91 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BLACK) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (GRAY) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (OYSTER) | 1647-9148T47 | |
2 | CONNECTOR ASSEMLBY | 22-85822A10 | |
3 | PIN, Dowel | 17-43044 | |
4 | STUD, (.438 x 3.12) Comment: (LONG) | 16-786382 | |
4 | STUD Comment: (9" X-LONG) | 16-78639 | |
5 | STUD, (.44 x 2.06) Comment: (LONG) | 16-8M0133358 | |
5 | STUD Comment: (7-1/16" X-LONG) | 16-74730 | |
6 | STUD, (.312 x 3.38) | 16-8M0034463 | 16-56297 2 |
7 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
8 | BEARING ASSEMBLY, Roller | 31-42647A1 | |
9 | SLEEVE | 23-43998 | |
11 | DRIVESHAFT Comment: (LONG) | 45-897624T | 45-44000 1 (LONG) |
11 | DRIVESHAFT Comment: (X-LONG) | 45-897625T | 45-44209 1 (X-LONG) |
12 | NOT SOLD SEPARATE, Pinion Gear Comment: (Part of 43-44104A2) | NSS | |
13 | WASHER | 12-92721 | |
14 | NUT, (.625-18) | 11-35921 | |
15 | SHIM SET | 15-42637A1 | |
16 | BEARING, Roller | 31-8M0146566 | |
17 | NUT | 8245191 | |
18 | WATER PUMP BASE ASSEMBLY | 46-8M0077147 | 46-42579A 3 |
19 | GASKET | 27-8M0204678 | |
20 | O-RING, (2.175 x .175) | 25-8M0142854 | |
20 | O-RING Comment: (2.109 I.D.) | 25-38099 | |
21 | OIL SEAL | 26-89238 | |
22 | OIL SEAL | 26-16977 | |
23 | GASKET | 27-8M0090319 | 27-85608 1 |
24 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
25 | FACE PLATE | 8M0204677 | |
26 | WATER PUMP BODY ASSEMBLY | 46-96148T1 | |
27 | INSERT | 48752T | |
28 | SEAL | 26-38970 | |
29 | IMPELLER | 47-89984T4 | |
30 | KEY | 28-8M0214992 | |
31 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
32 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
33 | NUT, (.250-28) | 11-8267119 | |
34 | WASHER | 12-36001 | |
35 | NUT | 11-13436 | |
36 | RING | 25-8M0214918 | |
37 | SLEEVE | 23-29804T | |
38 | SHAFT | 789022 | |
39 | E-RING | 53-29641 | |
40 | RETAINING RING | 53-78907 | |
41 | O-RING, (.862 x .103) | 25-25439 | |
42 | BUSHING ASSEMBLY | 23-77631A2 | |
43 | OIL SEAL | 26-8M0204708 | |
44 | WASHER | 12-77674 | |
45 | SCREW, (.375-16 x .250) | 10-79953Q04 | |
46 | SCREW, Magnetic | 22-8M0058389 | 22-67892A06 |
47 | WASHER, Fiber | 12-191833 | |
- | WATER PUMP REPAIR KIT | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 | |
- | GASKET SET, Engine Overhaul | 27-11338A88 |
Gear Housing(Drive) 2:1 Ratio-14 Teeth Pinion Gear
Back to TopBelow is the parts list for Mercury V-175 Gear Housing(Drive) 2:1 Ratio-14 Teeth Pinion Gear:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
0 | GEAR HOUSING Comment: (LONG)(BLACK) | 1647-9148T81 | |
0 | GEAR HOUSING Comment: (X-LONG)(BLACK) | 1647-9148T82 | |
0 | GEAR HOUSING Comment: (LONG)(GRAY) | 1647-9148T87 | |
0 | GEAR HOUSING Comment: (X-LONG)(GRAY) | 1647-9148T88 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC)(BLACK) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC)(GRAY) | 1647-9148T47 | |
2 | CONNECTOR ASSEMLBY | 22-85822A10 | |
3 | PIN, Dowel | 17-43044 | |
4 | STUD, (.438 x 3.12) Comment: (LONG) | 16-786382 | |
4 | STUD, (.438 x 3.69) Comment: (X-LONG) | 16-8M0034464 | 16-18978 3 (X-LONG) |
5 | STUD, (.44 x 2.06) | 16-8M0133358 | |
6 | STUD, (.312 x 3.38) | 16-8M0034463 | 16-56297 2 |
7 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
8 | BEARING ASSEMBLY, Roller | 31-42647A1 | |
9 | SLEEVE | 23-43998 | |
11 | DRIVESHAFT Comment: (LONG) | 45-897624T | 45-44000 1 (LONG) |
11 | DRIVESHAFT Comment: (X-LONG) | 45-897625T | 45-44209 1 (X-LONG) |
12 | NOT SOLD SEPARATE Comment: (Part of 43-44102A2) | NSS | |
13 | WASHER | 12-92721 | |
14 | NUT, (.625-18) | 11-35921 | |
15 | SHIM SET | 15-42637A1 | |
16 | BEARING, Roller | 31-8M0146566 | |
17 | NUT | 8245191 | |
18 | WATER PUMP BASE ASSEMBLY | 46-8M0077147 | 46-42579A 3 |
19 | GASKET | 27-8M0204678 | |
20 | O-RING, (2.175 x .175) | 25-8M0142854 | |
21 | OIL SEAL | 26-89238 | |
22 | OIL SEAL | 26-16977 | |
23 | GASKET, LOWER | 27-8M0090319 | 27-85608 1 |
24 | GASKET, UPPER | 27-858524 | 27-85609 1, 27-85609B 1 |
25 | FACE PLATE | 8M0204677 | |
26 | WATER PUMP BODY ASSEMBLY | 46-96148T1 | |
27 | INSERT | 48752T | |
28 | SEAL, RUBBER | 26-38970 | |
29 | IMPELLER | 47-89984T4 | |
30 | KEY | 28-8M0214992 | |
31 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
32 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
33 | NUT, (.250-28) | 11-8267119 | |
34 | WASHER | 12-36001 | |
35 | NUT | 11-13436 | |
36 | RING Comment: (Use where Applicable) | 25-8M0214918 | |
37 | SLEEVE | 23-29804T | |
38 | SHAFT, LOWER | 789022 | |
39 | E-RING | 53-29641 | |
40 | RETAINING RING Comment: (Use where Applicable) | 53-78907 | |
41 | O-RING, (.862 x .103) | 25-25439 | |
42 | BUSHING ASSEMBLY | 23-77631A2 | |
43 | OIL SEAL | 26-8M0204708 | |
44 | WASHER, RUBBER | 12-77674 | |
45 | SCREW, (.375-16 x .250), GREASE FILLER | 10-79953Q04 | |
46 | SCREW, Magnetic, DRAIN | 22-8M0058389 | 22-67892A06 |
47 | WASHER, Fiber | 12-191833 | |
- | WATER PUMP REPAIR KIT | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA | |
0 | GEAR HOUSING Comment: (LONG )(BLACK) | 1647-9148T81 | |
0 | GEAR HOUSING Comment: (LONG )(GRAY) | 1647-9148T87 | |
0 | GEAR HOUSING Comment: (X-LONG )(BLACK) | 1647-9148T82 | |
0 | GEAR HOUSING Comment: (X-LONG )(GRAY) | 1647-9148T88 | |
1 | No Longer Available, Gear Housing-Basic Comment: (Casting #1647-7223 or 1647-6463) | NLA | |
1 | GEAR HOUSING Comment: (BLACK)(Casting #1647-6670C) | 1647-7321A11 | |
1 | GEAR HOUSING Comment: (BLACK)(Casting #1647-8875C) | 1647-8688T9 | |
1 | GEAR HOUSING Comment: (GRAY) | 1647-8688T10 | |
2 | CONNECTOR ASSEMLBY | 22-85822A10 | |
3 | INSERT Comment: (STBD)(Use where Applicable) | 66885 | |
3 | INSERT Comment: (PORT)(Use where Applicable) | 66884 | |
4 | SCREW, (#10-32 X 1.88) Comment: (Use where Applicable) | 10-76156 | |
5 | NUT, Comment: (Use where Applicable) | 10-32,11-859124 | 11-45812 (Use where Applicable) |
6 | PIN, Dowel | 17-43044 | |
7 | STUD, (.438 x 3.12) Comment: (LONG) | 16-786382 | |
7 | STUD, (.437-14 x 4.00) Comment: (LONG) | 16-57921 | |
7 | STUD Comment: (8-1/8" - X-LONG) | 16-78639 | |
7 | STUD Comment: (9" - X-LONG) | 16-74731 | |
8 | STUD, (.44 x 2.06) Comment: (LONG) | 16-8M0133358 | |
8 | STUD Comment: (7-1/16" - X-LONG) | 16-74730 | |
9 | STUD, (.312 x 3.38) | 16-8M0034463 | 16-56297 2 |
10 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
11 | ROLLER BEARING | 31-35934A1 | |
12 | SCREW, (.375-16 X .75) | 23-98621 | |
13 | DRIVESHAFT Comment: (LONG) | 45-98682A1 | |
13 | DRIVESHAFT Comment: (X-LONG) | 45-41509A2 | |
14 | SPRING | 24-34576 | |
15 | PIN | 17-30545 | |
16 | PINION GEAR Comment: (Stamped 43-78081) | 43-78081T1 | |
16 | PINION GEAR Comment: (Stamped 43-67885) | 43-67885 | |
17 | NUT, (.625-18) | 11-35921 | |
18 | SHIM | 15-57007A1 | |
19 | TAPERED ROLLER BEARING ASSEMBLY | 31-53079A1 | |
20 | GASKET | 27-8M0214962 | |
21 | O-RING, (1.984 x .139) | 25-8M0214923 | |
22 | WATER PUMP BASE | 46-96146A6 | |
23 | OIL SEAL | 26-89238 | |
24 | OIL SEAL | 26-16977 | |
24A | PIN, Dowel | 17-35973 | |
25 | GASKET | 27-8M0090319 | 27-85608 1 |
26 | FACE PLATE | 8M0204677 | |
27 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
28 | WATER PUMP BODY ASSEMBLY | 46-96148T1 | |
29 | INSERT | 48752T | |
30 | SEAL | 26-38970 | |
31 | IMPELLER | 47-89984T4 | |
32 | KEY | 28-8M0214992 | |
33 | SCREW, (.250-20 x 2.25) | 10-30720 | |
34 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
35 | NUT, (.250-28) | 11-35888 | |
36 | WASHER | 12-36001 | |
37 | NUT, (.312-24) | 11-82670911 | |
38 | RING | 25-8M0214918 | |
39 | SLEEVE | 23-29804T | |
40 | LOWER SHIFT SHAFT | 76041 | |
40 | SHAFT Comment: (Hsg. Casting #1647-8675C ONLY) | 789022 | |
41 | E-RING | 53-29641 | |
42 | RETAINING RING | 53-78907 | |
43 | O-RING, (.862 x .103) | 25-25439 | |
44 | BUSHING ASSEMBLY | 23-77631A2 | |
45 | OIL SEAL | 26-8M0204708 | |
46 | WASHER | 12-77674 | |
47 | SCREW, (.375-16 x .250) | 10-79953Q04 | |
48 | SCREW, Magnetic | 22-8M0058389 | 22-67892A06 |
49 | WASHER, Fiber | 12-191833 | |
- | WATER PUMP REPAIR KIT | 46-96148A8 | |
- | SEAL KIT | 26-55682A1 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Gear Housing(Prop) 1.86:1 Ratio-15 Teeth Pinion Gear
Back to TopBelow is the parts list for Mercury V-175 Gear Housing(Prop) 1.86:1 Ratio-15 Teeth Pinion Gear:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
0 | GEAR HOUSING Comment: (LONG)(BLACK) | 1647-9148T84 | |
0 | GEAR HOUSING Comment: (LONG)(GRAY) | 1647-9148T84 | |
0 | GEAR HOUSING Comment: (X-LONG)(BLACK) | 1647-9148T85 | |
0 | GEAR HOUSING Comment: (X-LONG)(GRAY) | 1647-9148T91 | |
0 | GEAR HOUSING Comment: (X-LONG)(OYSTER) | 1647-9148T91 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC-BLACK) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC-GRAY) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC-OYSTER) | 1647-9148T47 | |
48 | FOLLOWER | 89594A1 | |
49 | SHIFT CAM | 789562 | |
50 | ROD | 79911A1 | |
51 | SPRING | 24-79910 | |
52 | WASHER | 12-78910 | |
53 | PIN | 17-8M0084245 | 17-78906 |
54 | SHIM SET | 15-47397A1 | |
55 | BEARING ASSEMBLY, Tapered Roller | 31-78172A1 | |
56 | FORWARD GEAR ASSEMBLY | 43-44104T2 | |
57 | ROLLER BEARING Comment: (1.308 O.D.) | 31-43999 | |
57 | ROLLER BEARING Comment: (1.313 O.D.) | 31-73363T | |
58 | RATCHET | 52-823174T | 52-823174, 52-78959 |
59 | PIN, Cross | 17-8M0084243 | 17-78905 |
60 | PIN, Detent | 17-78909 | |
61 | SPRING | 24-78962 | |
62 | PROPELLER SHAFT | 44-94148 | |
63 | NOT SOLD SEPARATE, Reverse Gear Comment: (Part of 43-44104A2) | NSS | |
64 | RING, Thrust | 681001 | |
65 | BEARING | 30-88957T | |
66 | O-RING | 25-8M0214920 | |
67 | BEARING CARRIER ASSEMBLY | 43567T1 | |
68 | ROLLER BEARING | 31-30956T | |
69 | SEAL | 26-8M0204670 | |
70 | KEY | 28-30281 | |
71 | TAB WASHER | 14-79447 | |
72 | RETAINER | 8M2011027 | 79448 |
73 | TRIM TAB ASSEMBLY | 97-31640Q4 | |
74 | SCREW, (.437-14 x 1.75) | 10-66024 | |
75 | WASHER, (.453 x .812 x .105) | 12-45176 | |
76 | NUT, (.437-20) | 11-8M0204653 | |
77 | SCREW, (.375-16 x 1.00) Comment: (LONG) | 10-65210 | |
77 | SCREW, (.375-16 X 6.00) Comment: (X-LONG) | 10-74727 | |
78 | THRUST HUB | 12-835467Q01 | 12-835467 1 |
79 | WASHER, Splined | 12-31211Q03 | |
80 | TAB WASHER | 14-816629Q | 14-816629, 14-31210, 14-816629B |
81 | NUT, Propeller | 11-52707Q1 | |
82 | LOCKWASHER, Toothed | 13-423511 | |
- | SEAL KIT | 26-89238A2 | |
- | GASKET SET, Engine Overhaul | 27-11338A88 |
Gear Housing(Propshaft) 2:1 Ratio-14 Teeth Pinion Gear
Back to TopBelow is the parts list for Mercury V-175 Gear Housing(Propshaft) 2:1 Ratio-14 Teeth Pinion Gear:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
0 | GEAR HOUSING Comment: (LONG)(BLACK) | 1647-9148T81 | |
0 | GEAR HOUSING Comment: (X-LONG)(BLACK) | 1647-9148T82 | |
0 | GEAR HOUSING Comment: (LONG)(GRAY) | 1647-9148T87 | |
0 | GEAR HOUSING Comment: (X-LONG)(GRAY) | 1647-9148T88 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC)(BLACK) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (BASIC)(GRAY) | 1647-9148T47 | |
48 | SHIFT CAM | 789562 | |
49 | FOLLOWER | 89594A1 | |
50 | ROD | 79911A1 | |
51 | SPRING | 24-79910 | |
52 | WASHER | 12-78910 | |
53 | PIN | 17-8M0084245 | 17-78906 |
54 | SHIM SET | 15-47397A1 | |
55 | BEARING ASSEMBLY, Tapered Roller | 31-78172A1 | |
56 | FORWARD GEAR ASSEMBLY | 43-44102A2 | |
57 | ROLLER BEARING Comment: (5/8") | 31-73363T | |
57 | ROLLER BEARING Comment: (1") | 31-549281 | |
58 | RATCHET | 52-823174T | 52-823174, 52-78959 |
59 | PIN, Cross | 17-8M0084243 | 17-78905 |
60 | PIN, Detent | 17-78909 | |
61 | SPRING | 24-78962 | |
62 | PROPELLER SHAFT | 44-94148 | |
63 | NOT SOLD SEPARATE, Reverse Gear Comment: (Part of 43-44102A2) | NSS | |
64 | RING, Thrust | 681001 | |
65 | BEARING | 30-88957T | |
66 | O-RING | 25-8M0214920 | |
67 | BEARING CARRIER ASSEMBLY | 43567T1 | |
68 | ROLLER BEARING | 31-30956T | |
69 | SEAL | 26-8M0204670 | |
70 | KEY | 28-30281 | |
71 | TAB WASHER | 14-79447 | |
72 | RETAINER | 8M2011027 | 79448 |
73 | TRIM TAB ASSEMBLY | 97-31640Q4 | |
74 | SCREW, (.437-14 x 1.75) | 10-66024 | |
75 | FILLER BLOCK | 8M0039169 | 67891 |
76 | NUT, (.437-20) | 11-8M0204653 | |
77 | SCREW, (.375-16 x 1.00) | 10-65210 | |
77 | SCREW, (.375-16 X 6.00) | 10-74727 | |
78 | THRUST HUB | 12-835467Q01 | 12-835467 1 |
79 | WASHER, Splined | 12-31211Q03 | |
80 | TAB WASHER | 14-816629Q | 14-816629, 14-31210, 14-816629B |
81 | NUT, Propeller | 11-52707Q1 | |
82 | LOCKWASHER, Toothed | 13-423511 | |
83 | WASHER, (.453 x .812 x .105) | 12-45176 | |
- | SEAL KIT | 26-89238A2 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
0 | GEAR HOUSING Comment: (LONG)(BLACK) | 1647-9148T81 | |
0 | GEAR HOUSING Comment: (LONG)(GRAY) | 1647-9148T87 | |
0 | GEAR HOUSING Comment: (X-LONG)(BLACK) | 1647-9148T82 | |
0 | GEAR HOUSING Comment: (X-LONG)(GRAY) | 1647-9148T88 | |
50 | SHIFT CAM Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 760394 | |
51 | CAM FOLLOWER Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 67888 | |
52/53 | SPRING/SLIDE ASSY. Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 24-76962A1 | |
50 | SHIFT CAM Comment: (Gear Hsg Casting #1647-8675C) | 789562 | |
51 | FOLLOWER Comment: (Gear Hsg Casting #1647-8675C) | 89594A1 | |
52 | ROD Comment: (Gear Hsg Casting #1647-8675C) | 79911A1 | |
53 | SPRING Comment: (Gear Hsg Casting #1647-8675C) | 24-79910 | |
54 | WASHER Comment: (Gear Hsg Casting #1647-8675C) | 12-78910 | |
55 | PIN Comment: (Gear Hsg Casting #1647-8675C) | 17-8M0084245 | 17-78906 (Gear Hsg Casting #1647-8675C) |
56 | SHIM SET | 15-47397A1 | |
57 | BEARING ASSEMBLY, Tapered Roller Comment: (Stamped-CUP #JM205110/Cone #JM205149) | 31-78172A1 | |
57 | TAPERED ROLLER BEARING Comment: (Stamped-CUP #M804010/Cone #M804049) | 31-35928T1 | |
58 | FORWARD GEAR ASSEMBLY Comment: (Stamped 43-78082) | 43-78082A3 | |
58 | FORWARD GEAR Comment: (Stamped 43-77179) | 43-77179A2 | |
59 | ROLLER BEARING | 31-73363T | |
60 | CLUTCH Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 52-67887 | |
61 | PIN, Cross Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 17-8M0100263 | 17-8M0084681, 17-8M0020941, 17-30632 (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) |
63 | SPRING Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 24-30893 | |
64 | PROPELLER SHAFT Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 44-67886 | |
65 | REVERSE GEAR Comment: (Gear Hsg Casting #1647-6670C/1647-7223 or 1647-6463) | 43-67889T | |
60 | RATCHET Comment: (Gear Hsg Casting #1647-8675C) | 52-823174T | 52-823174, 52-78959 (Gear Hsg Casting #1647-8675C) |
61 | PIN, Cross Comment: (Gear Hsg Casting #1647-8675C) | 17-8M0084243 | 17-78905 (Gear Hsg Casting #1647-8675C) |
62 | PIN, Detent Comment: (Gear Hsg Casting #1647-8675C) | 17-78909 | |
63 | SPRING Comment: (Gear Hsg Casting #1647-8675C) | 24-78962 | |
64 | PROPELLER SHAFT Comment: (Gear Hsg Casting #1647-8675C) | 44-94148 | |
65 | REVERSE GEAR Comment: (Gear Hsg Casting #1647-8675C) | 43-85462T | |
66 | RING, Thrust | 681001 | |
67 | BEARING | 30-88957T | |
68 | O-RING | 25-8M0214920 | |
69 | BEARING CARRIER ASSEMBLY | 43567T1 | |
70 | ROLLER BEARING | 31-30956T | |
71 | SEAL | 26-8M0204670 | |
73 | KEY | 28-30281 | |
74 | TAB WASHER | 14-79447 | |
75 | RETAINER | 8M2011027 | 79448 |
76 | TRIM TAB ASSEMBLY | 97-31640Q4 | |
77 | SCREW, (.437-14 x 1.75) | 10-66024 | |
78 | WASHER, (.453 x .812 x .105) | 12-45176 | |
79 | NUT, (.437-20) | 11-8M0204653 | |
80 | SCREW, (.375-16 x 1.00) Comment: (LONG) | 10-65210 | |
80 | SCREW, (.375-16 X 6.00) Comment: (X-LONG) | 10-74727 | |
81 | THRUST HUB | 12-835467Q01 | 12-835467 1 |
81 | THRUST HUG Comment: SN# 4838073 & Below | 72894 | |
82 | WASHER, Splined | 12-31211Q03 | |
83 | TAB WASHER | 14-816629Q | 14-816629, 14-31210, 14-816629B |
84 | NUT, Propeller | 11-52707Q1 | |
- | SEAL KIT | 26-55682A1 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 |
Hydraulic Pump Assembly
Back to TopBelow is the parts list for Mercury V-175 Hydraulic Pump Assembly:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | HYDRAULIC PUMP | 823653A9 | |
1 | ADAPTOR | 89492T | |
2 | COUPLING | 803852 | 89493 |
3 | MANUAL RELEASE Comment: (INCLUDES 2 O-RINGS) | 96598A1 | |
3 | MANUAL RELEASE Comment: (INCLUDES 3 O-RINGS) | 96598A1 | |
4 | PUMP (INCLUDES SCREWS) | 89495 | |
5 | FILTER | 35-89496 | |
6 | O-RING | 25-89498 | |
7 | O-RING | 25-89497 | |
8 | DIPSTICK | 89499 | |
9 | RESERVOIR | 90587T | |
10 | SCREW (INCLUDES O-RING) | 10-90588 | |
11 | THRU STUD Comment: (SHORT) | 16-90589 | |
11 | THRU STUD Comment: (LONG) | 16-90590 | |
11 | MOTOR | 17649A02 | |
12 | END FRAME | 89484 | |
13 | ARMATURE | 89485 | |
14 | WASHER | 12-89482 | |
15 | FIELD AND FRAME | 89486 | |
16 | BRUSH CARD | 89487 | |
17 | END FRAME | 89488 | |
18 | THRU BOLT Comment: (4-1/4") | 10-89483 | |
18 | THRU BOLT Comment: BOLT (4-9/16") | 10-89489 | |
19 | NUT | 11-89481 | |
- | RELIEF VALVE REPAIR KIT | 812501A1 | |
- | OVERHAUL REPAIR KIT | 99073A2 |
Hydraulic Pump and Mounting Brackets
Back to TopBelow is the parts list for Mercury V-175 Hydraulic Pump and Mounting Brackets:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | HYDRAULIC PUMP | 823653A9 | |
2 | BRACKET | 90318 | |
3 | SCREW, (.312-18 x .625) | 10-90285 | |
4 | WASHER, (.330 x .750 x .060) | 12-56720 | |
5 | NUT, | 10-32,11-8M0204718 | |
6 | TERMINAL BLOCK | 86-45915 | |
7 | SCREW, (#10-16 x .375) | 10-62568 | |
8 | BATTERY LEAD Comment: (NEGATIVE) SN# Merc-5488751/Mariner 5555929 & Below | 32988 | |
8 | BATTERY CABLE Comment: (NEGATIVE) SN# Merc-5488752/Mariner-5555930 & Up | 84-79138A4 | |
12 | WIRE Comment: (RED - 3") | 84-87379A2 | |
12 | WIRE Comment: (BLACK - 3-1/4") | 84-61600A9 | |
13 | CONNECTOR AND HARNESS | 84-74023A1 | |
14 | RETAINER | 88075 | |
15 | STARTER SOLENOID | 89-853654A1 | |
16 | SCREW, (.250-20 x .500) | 10-41508 | |
17 | LOCKWASHER, | 10,13-26996 | |
18 | NUT, | 10-32,11-68219 | |
19 | LOCKWASHER, (.312) | 13-8M0204647 | |
20 | NUT, | 10-32,11-8M0204668 | |
21A | BOOT | 46265 | |
24 | BATTERY LEAD Comment: (POSITIVE) SN# Merc-5488751/Mariner 5555929 & Below | 32979 | |
24 | BATTERY LEAD Comment: (POSITIVE) SN# Merc-5488752/Mariner-5555930 & Up | 84-79139A9 | |
28 | PLATE | 87760T | |
29 | SCREW, (.312-18 x .750) | 10-39349 | |
30 | LOCKWASHER, (.312) | 13-8M0204647 | |
31 | SCREW, (.375-16 x .62) | 10-90271 | |
32 | LOCKWASHER, (.375) | 13-58643 | |
33 | BRACKET | 87762 | |
34 | BOLT, (.375-24 X 3.50) | 10-69698 | |
35 | LOCKWASHER, (.375) | 13-58643 | |
36 | NUT, (.375-24) | 11-46335 | |
37 | ADAPTOR Comment: (1/4" Flare) SN# Merc-5488751/Mariner 5555929 & Below | 22-89029 | |
37 | FITTING Comment: (3/16" Flare) SN# Merc-5488751/Mariner 5555929 & Below | 22-77366 | |
38 | HOSE Comment: (PORT) SN# Merc-5488751/Mariner 5555929 & Below | 32-67740 | |
38 | HOSE Comment: (STBD) SN# Merc-5488751/Mariner 5555929 & Below | 32-67742 | |
39 | TRIM SENDER HARNESS Comment: SN# Merc-5488751/Mariner 5555929 & Below | 84-89017A1 | |
40 | CLAMP Comment: SN# Merc-5488751/Mariner 5555929 & Below | 54-75343 |
Hydraulic Pump(S/N-Merc-5393736/Mariner-5316380 & Below)
Back to TopBelow is the parts list for Mercury V-175 Hydraulic Pump(S/N-Merc-5393736/Mariner-5316380 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | HYDRAULIC PUMP | 92975A32 | |
2 | O-RING, (.364. x .070) | 25-48171 | |
3 | CONTROL VALVE | 69582A2 | |
2 | O-RING, (.364. x .070) | 25-48171 | |
4 | SCREW, (.250-28 X 1.25) | 10-56500 | |
4 | SCREW, (.250-28 x 1.50) | 10-69697 | |
5 | LOCKWASHER, (.250) | 13-26992 | |
6 | SOLENOID | 89-67458A7 | |
- | O-RING, (.549 x .103) | 25-69756 | |
7 | SCREW, (.250-20 x .750) | 10-28636 | |
8 | LOCKWASHER, (.250) | 13-26992 | |
9 | LOCKWASHER, | 10,13-26996 | |
10 | NUT, | 10-32,11-68219 | |
11 | HOSE Comment: (PORT) | 32-67740 | |
11 | HOSE Comment: (STARBOARD) | 32-67742 | |
12 | JUMPER WIRE Comment: (RED) | 84-79139A2 | |
12 | JUMPER WIRE Comment: (BLACK) | 55992 | |
13 | BATTERY LEAD Comment: (POSITIVE) | 32979 | |
13 | BATTERY LEAD Comment: (NEGATIVE) | 32988 | |
14 | TRIM PUMP MOUNTING BRACKET KIT | 87762A04 | |
15 | BOLT, (.375-24 X 3.50) | 10-69698 | |
16 | LOCKWASHER, (.375) | 13-58643 | |
17 | NUT, (.375-24) | 11-46335 | |
18 | MOUNTING PLATE | 71976 | |
19 | SCREW, (.312-18 x 1.00) | 10-37562 | |
20 | LOCKWASHER, (.312) | 13-8M0204647 | |
21 | NUT, | 10-32,11-8M0204668 | |
22 | SCREW, (.312-18 x .750) | 10-39349 | |
23 | HARNESS | 84-68259A1 | |
24 | HARNESS | 84-68260A1 | |
25 | CLIP | 54-22627 | |
26 | SCREW, (#10-32 X 0.50) | 10-37655 | |
27 | C WASHER | 8M0084613 | 69205 |
28 | BRACKET | 68037 | |
29 | LOCKWASHER, | 10,13-26996 | |
30 | NUT, | 10-32,11-68219 | |
31 | TERMINAL BLOCK MARINER | 86-638131 | |
32 | SCREW, (#10-32 X 0.50) | 10-37655 | |
33 | SCREW, (#10-16 x .375) | 10-62568 | |
34 | STRAP | 68036 | |
35 | SCREW, (.250-28 x 1.250) | 10-38601 | |
36 | LOCKWASHER, (.250) | 13-26992 | |
37 | NUT, (.250-28) | 11-29598 | |
38 | BUMPER | 269011 | |
39 | STARTER SOLENOID | 89-853654A1 | |
40 | LOCKWASHER, | 10,13-26996 | |
41 | NUT, | 10-32,11-68219 | |
42 | LOCKWASHER, (.312) | 13-8M0204647 | |
43 | NUT, | 10-32,11-8M0204668 | |
44 | BOOT | 46265 | |
45 | CLAMP | 54-75343 | |
- | HYDRAULIC PUMP | 92975A32 | |
1 | O-RING, (.364. x .070) | 25-48171 | |
2 | No Longer Available, Valve Body & Gear Assembly | NLA | |
3 | SCREW, (.190-24 x .62) | 10-20411 | |
4 | SEAL | 392-7735 | |
5 | RESERVOIR | 392-6251 | |
6 | SCREW, (#10-32 x .437) | 10-62269 | |
7 | No Longer Available, Filler Screw | NLA | |
8 | WASHER | 392-2623 | |
9 | ARMATURE | 392-2943 | |
10 | No Longer Available, Field & Frame | NLA | |
11 | BALL | 392-2944 | |
12 | PLATE ASSEMBLY | 392-2940 | |
13 | BRUSH KIT | 392-8989 | |
14 | SPRING SET | 392-2529 | |
15 | No Longer Available, Thru Bolt Set | NLA | |
16 | LOCKWASHER, | 10,13-26996 |
Instrumentation
Back to TopBelow is the parts list for Mercury V-175 Instrumentation:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TACHOMETER | 79-895283Q43 | 79-825348A 1 |
2 | BRACKET | 79101T | |
3 | LIGHT BULB | 88-72729 | |
3 | LIGHT BULB (SQUARE FACE)(Black Bezel) | 88-77613 | |
4 | SOCKET, Light Bulb | 88-79888 | |
4 | No Longer Available, Socket Comment: (SQUARE FACE) | NLA | |
4 | SOCKET Comment: (BLACK BEZEL) | 49917A4 | |
5 | NUT, | 10-32,11-45076 | |
6 | CABLE ASSEMBLY, (1.50 Feet-Black) | 84-86322A7 | |
6 | CABLE ASSEMBLY, (1.50 Feet-Purple) | 84-86323A5 | |
6 | CABLE ASSEMBLY, (2.50 Feet-Black) | 84-61600A7 | |
6 | No Longer Available, Wire (White 2 Inches) | NLA | |
7 | TRIM GAUGE | 79-895292Q41 | 79-825338A 1, 79-825338A 3 |
8 | BRACKET | 79480 | |
9 | LIGHT BULB | 88-72729 | |
10 | SOCKET, Light Bulb | 88-79888 | |
11 | NUT, | 8-32,11-26419 | |
12 | WASHER | 12-26427 | |
7 | TRIM GAUGE Comment: (SQUARE FACE) | 79-75694A1 | |
8 | No Longer Available, Bracket Comment: (SQUARE FACE) | NLA | |
9 | LIGHT BULB Comment: (SQUARE FACE) | 88-77613 | |
10 | No Longer Available, Socket Comment: (SQUARE FACE) | NLA | |
11 | NUT Comment: (6-32)(SQUARE FACE) | 11-55821 | |
11 | NUT, Comment: (SQUARE FACE) | 10-32,11-45076 | |
8 | BRACKET Comment: (Black Bezel Uses Bayonet Type Base Bulb) | 76532 | |
9 | LIGHT BULB Comment: (Black Bezel Uses Bayonet Type Base Bulb) | 88-77613 | |
10 | SOCKET Comment: (Black Bezel Uses Bayonet Type Base Bulb) | 49917A4 | |
11 | NUT, Comment: (Black Bezel Uses Bayonet Type Base Bulb) | 10-32,11-45076 | |
13 | HARNESS ASSEMBLY, Tachometer (5.00 Feet) Comment: (2 RING TERMINALS) | 84-86396A8 | |
13 | HARNESS Comment: (4 RING TERMINALS) | 84-69108A1 | |
14 | ALARM HORN AND WIRE ASSEMBLY | 68878A6 | |
15 | COVER | 68879 | |
16 | SPACER | 23-8M0084588 | |
17 | WASHER, (.200 x .440 x .032) | 12-24676 | |
18 | SCREW, (#10 x 1.00) | 10-35401 | |
19 | TEMPERATURE GAUGE | 79-895287Q41 | 79-825326A 1 |
20 | LIGHT BULB | 88-72729 | |
21 | SOCKET, Light Bulb | 88-79888 | |
22 | WASHER | 12-26427 | |
23 | BRACKET | 79480 | |
24 | NUT, | 8-32,11-26419 | |
25 | CABLE ASSEMBLY, (2.00 Feet - Purple) | 84-86323A2 | |
25 | CABLE ASSEMBLY, (17.00 Inches-Black) | 84-61600A16 | |
25 | CABLE ASSEMBLY, (23.00 Feet-Tan/Blue) | 84-88032A3 | |
26 | TEMPERATURE SENDER | 12415 | |
27 | COVER | 12419 | |
28 | PLUG | 19-12431T |
Oil Injection Components
Back to TopBelow is the parts list for Mercury V-175 Oil Injection Components:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | SENSOR ASSEMBLY | 12430A4 | |
2 | SCREW, (#10-16 x .625) | 10-48409 | |
3 | WARNING MODULE ASSEMBLY | 41470A27 | |
4 | WASHER | 12-38833 | |
5 | SCREW, (#10-32 x .875) | 10-690201 | |
6 | OIL PUMP | 815698T | 815698, 41032 |
7 | SCREW, (#10-32 x .625) | 10-32228 | |
7 | SCREW, (#10-32 x 1.120) | 10-41507 | |
8 | LINK | 193856 | |
9 | BEARING ASSEMBLY | 23-41429A2 | |
10 | DRIVEN GEAR | 43-14563 | |
11 | TUBING, (8.00 Inch) | 32-82381335 | |
12 | O-RING | 25-11379 | |
13 | SCREW | 10-42813 | |
14 | TANK | 1257-87421 | |
15 | CAP ASSEMBLY | 36-43298A2 | |
16 | O-RING | 25-11332 | |
17 | ADAPTOR HOUSING ASSEMBLY | 816190A4 | |
18 | O-RING | 25-11332 | |
19 | TUBE | 32-99802 | |
20 | No Longer Available, Quick Disconnect Kit (Order parts separately) | NLA | |
21 | HOSE, (114.00 Inches) | 32-99439 | |
22 | HOUSING | 12540A3 | |
23 | LATCH | 12242A1 | |
24 | OIL RESERVOIR | 994436 | |
25 | SCREW, (#10-32 x .875) | 10-690201 | |
26 | WASHER | 12-42118 | |
27 | GROMMET | 25-42117 | |
28 | BUSHING | 23-42116 | |
29 | TUBING | 32-82381455 | |
30 | CAP ASSEMBLY | 36-43300A9 | |
31 | GASKET | 27-43307T | |
32 | FLOAT ASSEMBLY | 8M0187298 | |
33 | PUSHNUT | 11-99265 | |
34 | CLAMP (SMALL) | 54-415821 | |
35 | CLAMP (LARGE) | 54-415823 | |
36 | FUEL LINE, (57.00 Inches Bulk) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
37 | TEE | 22-42425 | |
38 | HOSE | 32-9072925 | |
39 | FUEL LINE, (57.00 Inches Bulk) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
40 | FITTING (CRANKCASE) | 21-8781051 | |
- | GASKET SET, Engine Overhaul | 27-11338A88 |
Power Trim Components
Back to TopBelow is the parts list for Mercury V-175 Power Trim Components:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | MANIFOLD ASSEMBLY Comment: (BLACK) | 99659A21 | |
1 | MANIFOLD ASSEMBLY Comment: (GRAY) | 99659A22 | |
2 | PIPE PLUG, MANIFOLD | 22-56800 | |
3 | TRIM CYLINDER ASSEMBLY Comment: (BLACK) | 41493A7 | |
3 | TRIM CYLINDER ASSEMBLY Comment: (GRAY) | 41493A7 | |
4 | GUIDE ASSEMBLY | 41492A1 | |
5 | REPAIR KIT | 25-41478A1 | |
6 | CHECK VALVE KIT | 41482A2 | |
7 | GUIDE ASSEMBLY, TRIM ROD | 1100-8M0021648 | 878243A 1 |
8 | PISTON AND ROD ASSEMBLY, PORT | 878413A1 | |
9 | TRIM FILTER ASSEMBLY | 35-12184A1 | |
10 | PISTON AND ROD ASSEMBLY, STARBOARD | 878414T01 | 878414A 1 |
11 | PIN, Groove, TRIM CYLINDER (UPPER) | 17-821539 | 17-13794, 17-19603 |
12 | VALVE ASSEMBLY | 893929A01 | 813442A 2 |
12A | E RING | 53-815949001 | 53-812844, 53-835104 |
13 | SCREW, (M6 x 14), COVER | 10-4000327 | |
14 | WASHER, COVER SCREW | 12-4002315 | |
15 | COVER, MANIFOLD | 99642 | |
16 | O-RING KIT | 25-48462A4 | |
17 | PLUG ASSEMBLY | 19-99609A1 | |
18 | SHAFT ASSEMBLY | 99641A1 | |
19 | PIPE PLUG, SHAFT | 22-56800 | |
20 | SCREW, (M6 x 20), PUMP AND MOTOR | 10-4008820 | |
21 | LOCKWASHER, (M6) | 13-400256 | |
22 | POWER TRIM PUMP | 826729A10 | 826729A09, 826729A08, 826729A07, 826729A 4 |
23 | SHAFT, UPPER | 99625002 | |
24 | ANODE ASSEMBLY | 97-818298Q1 | |
25 | SCREW, (M6 x 25), ANODE | 10-8M0204707 | |
26 | WASHER, (.281 x .500 x .060), ANODE SCREW | 12-8M0204649 | |
27 | STRIKER PLATE, TRIM SHAFT | 8M0045383 | 99630 1 |
28 | LOCKWASHER, (.375) | 13-58643 | |
29 | NUT, (.375-24) | 11-46335 | |
30 | CONTROL HARNESS ASSEMBLY, POWER TRIM Comment: (3 WIRE) | 84-99695A1 | |
30 | CONTROL HARNESS, (17.00 Inches), POWER TRIM Comment: (2 WIRE) | 84-17201A2 | |
31 | WIRE ASSEMBLY Comment: (13-1/4" - BLACK) | 84-79138A12 | |
31 | WIRE ASSEMBLY, (Black- 3.5 Inches) | 84-88807A8 | |
31 | WIRE ASSEMBLY, (4.750 Inches) | 84-87379A25 | |
32 | SOLENOID STARTER | 8M0185622 | |
33 | SCREW, (.250-20 x .620) | 10-28635 | |
34 | NUT, | 8-32,11-26419 | |
35 | LOCKWASHER, (.250) | 13-26992 | |
36 | NUT, (.250-20) | 11-94330 | |
37 | INSULATOR | 85-97861 | |
38 | CLIP, PUMP WIRE | 54-22875 | |
39 | C WASHER, CLIP SCREW | 8M0084613 | 69205 |
40 | SCREW, (#10-16 x .440), CLIP TO TRANSOM BRACKET | 10-69079 | |
41 | PIN, Groove, TRIM CYLINDER (LOWER) | 17-878267 | 17-44431 |
42 | SCREW, (M10 x 30), MANIFOLD | 10-4000377 | |
43 | LOCKWASHER, SS, MANIFOLD SCREW | 13-400258 |
Power Trim Pump(Eaton Rectangular Motor)
Back to TopBelow is the parts list for Mercury V-175 Power Trim Pump(Eaton Rectangular Motor):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | POWER TRIM PUMP | 826729A10 | 826729A09, 826729A08, 826729A07, 826729A 4 |
1 | FRAME AND FIELD KIT | 12659 | |
2 | BRUSH SPRING KIT | 12665 | |
3 | BRUSH CARD KIT | 13506 | |
4 | PUMP AND END FRAME KIT | 12662 | |
5 | PUMP SEAL KIT | 126631 | |
6 | END FRAME KIT | 12660 | |
7 | ARMATURE KIT | 12661 | |
8 | THRU BOLT KIT | 12664 |
Power Trim Pump(Prestolite Round Motor)
Back to TopBelow is the parts list for Mercury V-175 Power Trim Pump(Prestolite Round Motor):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | POWER TRIM PUMP ASSEMBLY | 826729A10 | 826729A09, 826729A08, 826729A07, 826729A 4 |
1 | CARTRIDGE PUMP ASSEMBLY | 826729A10 | 826729A09, 826729A08, 826729A07, 826729A 4 |
2 | O-RING KIT | 392-8996 | |
3 | ARMATURE | 392-8986 | |
4 | No Longer Available, Frame & Field | NLA | |
5 | O-RING | 392-8992 | |
6 | SPRING KIT | 392-8993 | |
7 | HEAD | 392-8988 | |
8 | BRUSH KIT | 392-8989 | |
9 | THRU BOLT KIT | 392-8994 | |
10 | CLAMP | 392-8985 | |
11 | No Longer Available, Nut | NLA | |
12 | O-RING | 392-8991 |
Reed Block
Back to TopBelow is the parts list for Mercury V-175 Reed Block:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
20 | HOUSING | 99747A2 | |
20 | HOUSING Comment: (USE W/SQUARE FUEL PUMP) | 99747A9 | |
21 | SCREW, (.250-20 x 1.25) | 10-24878 | |
21 | SCREW, (.25-20 X 1.375) | 10-69067 | |
21 | SCREW, (.25-20 X 1.50) | 10-69093 | |
22 | GASKET, REED BLOCK HOUSING | 27-935361 | |
23 | GASKET, REED BLOCK | 27-657443 | |
24 | REED BLOCK | 75953 | |
26A | REED STOP Comment: (DESIGN I) | 34-67298 | |
27A | SCREW, REEDS TO REED BLOCK Comment: (DESIGN I) | 10-76497 | |
25 | REED ASSEMBLY Comment: (DESIGN II) | 34-75362A1 | |
26 | REED CLAMP Comment: (DESIGN II) | 961832 | |
27 | SCREW, (#8-32 x .375), REEDS TO REED BLOCK Comment: (DESIGN II) | 10-57583T | |
28 | SCREW, (.250-20 x .750), REED BLOCK | 10-65746 | |
29 | STUD, (.250-28 x 1.125), CARBURETOR MOUNTING | 16-270372 | |
30 | CHECK VALVE | 21-426585 | |
31 | FITTING (90 DEG.) | 22-15133 | |
32 | TUBING, (20.00 Feet Bulk), BLEED LINE Comment: (.092 I.D.) | 32-892024122 | 32-99130122 (.092 I.D.) |
32 | HOSE, BLEED Comment: LINE (.077 I.D.) | 32-9938779 | |
34 | CONNECTOR (Press-In) Comment: SN# 6618751 & Up | 22-56759 | |
34 | FITTING Comment: (5/16-24 THREAD) | 22-79790 | |
35 | CHECK VALVE Comment: (ELBOW) | 21-64871A2 | |
35 | CHECK VALVE Comment: (STRAIGHT) | 21-428671 | |
36 | CLIP | 54-23567 | |
37 | SCREW, (#10-16 x .375), CLAMP | 10-62568 | |
38 | C WASHER | 8M0084613 | 69205 |
39 | WASHER Comment: (USE W/THREADED REF. #34) | 12-73473 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 |
Relief Valve System
Back to TopBelow is the parts list for Mercury V-175 Relief Valve System:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
3 | COVER Comment: (DESIGN I) | 8M0039767 | 68729 1 (DESIGN I) |
4 | GASKET Comment: (DESIGN I) | 27-78690002 | |
5 | RELIEF VALVE PLATE Comment: (DESIGN I) | 65664 | |
6 | COVER Comment: (DESIGN II) | 65663A2 | |
7 | PLATE ASSEMBLY Comment: (DESIGN II) | 65664A1 | |
8 | GASKET, RELIEF VALVE PLATE Comment: (DESIGN II) | 27-88907003 | |
9 | SCREW, (.312-18 x 1.12), COVER Comment: (DESIGN I & II) | 10-38837 | |
10 | DIAPHRAGM Comment: (DESIGN I & II) | 648771 | |
11 | WASHER Comment: (DESIGN I & II) | 12-76451 | |
12 | SCREW, (#10-16 x .750) Comment: (DESIGN I & II) | 10-69570 | |
13 | SPRING Comment: (DESIGN I & II) | 24-64878 | |
14 | POPPET VALVE Comment: (DESIGN I & II) | 86596 | |
15 | CARRIER Comment: (DESIGN I & II) | 65848 | |
16 | GROMMET Comment: (DESIGN I & II) | 25-64872 | |
17 | COVER Comment: (DESIGN III) | 14462A1 | |
18 | SCREW, (.312-18 x 1.250) Comment: (DESIGN III) | 10-74824 | |
19 | GASKET Comment: (DESIGN III) | 27-78690002 | |
20 | PLATE Comment: (DESIGN III) | 16497A1 | |
21 | DIAPHRAGM Comment: (DESIGN III) | 144791 | |
22 | WATER DEFLECTOR Comment: (DESIGN III) | 16496 | |
23 | WASHER Comment: (DESIGN III) | 12-76451 | |
24 | SCREW, (#10-16 x .750) Comment: (DESIGN III) | 10-69570 | |
25 | SPRING Comment: (DESIGN III) | 24-64878 | |
26 | POPPET Comment: (DESIGN III) | 14480 | |
27 | CARRIER Comment: (DESIGN III) | 65848 | |
28 | GROMMET Comment: (DESIGN III) | 25-64872 | |
29 | WASHER Comment: (DESIGN III) | 12-85303 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Service/Support Material
Back to TopBelow is the parts list for Mercury V-175 Service/Support Material:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | PARTS MANUAL, 175 H.P. V-6 (1976-1988 COMBINED BOOKS) | 90-822256 | 90-13292, 90-74973, 90-84233, 90-84652, 90-89175 |
- | SERVICE MANUAL Comment: SN# 5464485 & Below | 32-861333 | |
- | SERVICE MANUAL Comment: SN# 5464486 THRU 0C100860 | 90-976583 | |
- | DECAL SET Comment: (Black) SN# 6618750 & Below | 37-89618A80 | |
- | DECAL SET Comment: (Black) SN# 6618751 & Up | 37-13052A86 | |
- | DECAL SET Comment: (Gray) SN# 6618750 & Below | 37-86634A79 | |
- | DECAL SET Comment: (Gray) SN# 6618751 & Up | 37-12306A85 | |
- | DECAL SET Comment: (BUCKET STYLE) (OYSTER) | 37-18204A88 | |
- | DECAL SET Comment: (CLAM SHELL STYLE) (OYSTER) | 37-17996A88 | |
- | OWNER'S GUIDE Comment: (BLACK) | 90-11143880 | |
- | OWNER'S GUIDE Comment: (GRAY) | 90-11142880 | |
- | OWNER'S GUIDE Comment: (OYSTER) | 90-18110881 |
Starter Motor(American Bosch #10652-21-M030SM)
Back to TopBelow is the parts list for Mercury V-175 Starter Motor(American Bosch #10652-21-M030SM):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | STARTER MOTOR | 50-898265010 | 50-72467 |
1 | DRIVE KIT | 90644 | |
2 | DRIVE ASSEMBLY | 685753 | |
3 | PLATE | 75660 | |
4 | BOLT | 10-74968 | |
6 | ARMATURE | 74964 | |
7 | BRUSH/SPRING KIT | 898265016 | 75384, 75384 1 |
8 | BUSHING | 23-57387 | |
9 | NOT SOLD SEPARATE, Washer (AMERICAN BOSCH #WA-1728) | NSS | |
10 | LOCKWASHER, (.250) | 13-26992 | |
11 | NUT, (.250-20) | 11-20890 | |
12 | HOLDER | 898265014 | 61787 |
13 | NOT SOLD SEPARATE, Screw (AMER. BOSCH #02441-22-SC-30SM) | NSS | |
14 | END CAP | 15386001 |
Starter Motor(American Bosch #14916-24-M030SM)
Back to TopBelow is the parts list for Mercury V-175 Starter Motor(American Bosch #14916-24-M030SM):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | STARTER MOTOR Comment: (REPLACED W/50-79472) | 50-893893 | 50-79472T 2, 50-79472 2 (REPLACED W/50-79472) |
1 | DRIVE KIT | 90645 | |
2 | DRIVE | 13310T1 | |
3 | PLATE | 75660 | |
4 | BOLT | 10-74968 | |
6 | NOT SOLD SEPARATE, Washer (AMER. BOSCH #WA-3122) | NSS | |
7 | ARMATURE | 75658 | |
8 | BRUSH/SPRING KIT | 898265016 | 75384, 75384 1 |
9 | HOLDER | 898265014 | 61787 |
10 | NOT SOLD SEPARATE, Screw (AMER. BOSCH #02441-22-SC-30SM) | NSS | |
11 | END CAP | 15386001 |
Starter Motor(American bosch #17183-28-M030SM)
Back to TopBelow is the parts list for Mercury V-175 Starter Motor(American bosch #17183-28-M030SM):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | STARTER MOTOR | 50-893893 | 50-79472T 2, 50-79472 2 |
1 | DRIVE KIT | 90645 | |
2 | DRIVE | 13310T1 | |
3 | PLATE | 75660 | |
4 | BOLT | 10-74968 | |
6 | NOT SOLD SEPARATE, Washer (AMERICAN BOSCH #WA3122) | NSS | |
7 | ARMATURE | 79216 | |
8 | BRUSH/SPRING KIT | 898265016 | 75384, 75384 1 |
9 | HOLDER | 898265014 | 61787 |
10 | NOT SOLD SEPARATE, Screw (AMER. BOSCH #02441-22SC30SM) | NSS | |
11 | END CAP | 15386001 |
Starter Motor(Prestolite #MJL-4003B)
Back to TopBelow is the parts list for Mercury V-175 Starter Motor(Prestolite #MJL-4003B):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | STARTER MOTOR ASSEMBLY Comment: (REPLACE W/50-72467) | 50-898265010 | 50-72467 (REPLACE W/50-72467) |
1 | DRIVE | 392-5053 | |
2 | PLATE | 392-4261 | |
3 | BUSHING | 392-2518 | |
4 | ARMATURE | 392-5150 | |
5 | PACKAGE Comment: (Contains various thickness washers) | 392-2523 | |
6 | No Longer Available, Frame & Field | NLA | |
7 | BRUSH AND TERMINAL SET Comment: (Includes 4 brushes plus termianl and lock nut) | 392-2521 | |
8 | SPRING SET (2 SPRINGS PER SET) | 392-2514 | |
9 | BRUSH PLATE AND HOLDER ASSEMBLY | 392-2519 | |
10 | No Longer Available, End Cap | NLA | |
11 | THRU BOLT | 392-4262 |
Swivel Bracket and Steering Arm
Back to TopBelow is the parts list for Mercury V-175 Swivel Bracket and Steering Arm:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | SWIVEL BRACKET ASSEMBLY Comment: (Black) SN# 5488752 THRU 6618750 | 1491-9225A3 | |
1 | SWIVEL BRACKET ASSEMBLY Comment: (Gray) SN# 5555930 THRU 6618750 | 1491-9225A4 | |
1 | SWIVEL BERACKET ASSEMBLY Comment: (Black) SN# 6618751 & Up | 1499-8M0102865 | 1499-8710T20 (Black) SN# 6618751 & Up |
1 | SWIVEL BRACKET ASSEMBLY Comment: (Gray) SN# 6618751 & Up | 1499-8710T21 | |
2 | SEAL, Oil | 26-87735 | |
3 | BUSHING | 23-818764 | 23-67669 |
4 | O-RING | 25-33466 | |
5 | SPACER | 23-67668 | |
6 | FITTING, Grease | 22-8M0169589 | |
6A | BUSHING Comment: SN# 6618751 & Up | 23-821207 | 23-99608 SN# 6618751 & Up |
7 | GROMMET Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 25-88341 | |
8 | SEAL, Oil Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 26-85023 | |
9 | WASHER Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 12-87161 | |
10 | O-RING, (.364. x .070) Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 25-48171 | |
11 | TILT LOCK LEVER Comment: (Port) SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 85030A2 | |
11 | TILT LOCK LEVER Comment: (Starboard) SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 85028A2 | |
12 | BUSHING Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 23-86600 | |
13 | SPRING Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 24-85367 | |
14 | PLUNGER Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 41052 | |
15 | STUD Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 16-88876 | |
16 | KNOB Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 86603 | |
17 | COUPLING Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 864751 | |
18 | PIN Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 18-87200 | |
19 | SPRING Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 24-88049 | |
20 | COTTER PIN Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 18-93861 | |
21 | WAVE WASHER | 13-78854 | |
22 | BOTTOM YOKE Comment: (BLACK) | 86580A1 | |
22 | BOTTOM YOKE Comment: (GRAY) | 86580A1 | |
22 | BOTTOM YOKE Comment: (OYSTER) | 86580A1 | |
23 | RETAINING RING | 53-67684 | |
24 | WASHER | 12-67670 | |
25 | SWIVEL PINP/STEERING ARM Comment: (Black) SN# 5488752 THRU 6618750 | 17-840792A1 | |
25 | SWIVEL PIN/STEERING ARM Comment: (Gray) SN# 5555930 THRU 6618750 | 17-840792A1 | |
25 | SWIVEL PIN AND STEERING ARM Comment: (Black) SN# 6618751 & Up | 17-67706A55 | |
25 | SWIVEL PIN AND STEERING ARM Comment: (Gray) SN# 6618751 & Up | 17-67706A55 | |
25 | SWIVEL PIN AND STEERING ARM Comment: (Oyster) SN# 6618751 & Up | 17-67706A55 | |
26 | SCREW, (.437-20 x 7.50) | 10-8M0176309 | |
27 | MOUNT (UPPER) | 78687T | |
28 | WASHER | 12-66921 | |
29 | WASHER | 12-78688 | |
30 | NUT, (.437-20) | 11-8M0204653 | |
31 | BUMPER Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 67754 | |
31A | BUMPER Comment: SN# 6618751 & Up | 88882 | |
32 | STEERING LINK ASSEMBLY | 92876A12 | |
33 | SCREW, (.375-24 x 1.25) | 10-849838 | 10-14000 |
34 | NUT, (.375-24) | 11-8M0204726 | |
35 | WASHER, (.406 x .734 x .063) SS | 12-34931 | |
36 | TRIM SENDER ASSEMBLY Comment: (Female Terminals) | 86485A5 | |
36 | TILT SWITCH ASSEMBLY Comment: (Male Terminals) SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 86485A6 | |
37 | HARNESS Comment: (Female Terminals) | 84-65017A15 | |
37 | HARNESS Comment: (Male Terminals) SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 84-65017A14 | |
38 | STRAP Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 88342 | |
39 | SCREW, (#10-32 x .500) Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 10-87926 | |
40 | J CLIP Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 54-54457 | |
41 | SCREW, (.250-28 X .50) Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 10-98256 | |
42 | WASHER, (.281 x .500 x .060) Comment: SN# Mercury-5488752/Mariner-5555930 THRU Mercury-6618750/Mariner-6618750 | 12-8M0204649 | |
43 | TRIM SENDER ASSEMBLY Comment: SN# 6618751 & Up | 8M0074846 | 821180A 6 SN# 6618751 & Up |
44 | SCREW, (#10-24 x .750) Comment: SN# 6618751 & Up | 10-852368 | 10-56682 SN# 6618751 & Up |
45 | LOCKWASHER, Comment: SN# 6618751 & Up | 10,13-26996 | |
46 | WASHER, (.203 x .406 x .040) Comment: SN# 6618751 & Up | 12-89302 | |
- | GASKET SET, Engine Overhaul Comment: SN# 6618751 & Up | 27-11338A88 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 27-79583A81 |
Swivel Bracket(S/N-Merc-5488751/Mariner-5316380 & Below)
Back to TopBelow is the parts list for Mercury V-175 Swivel Bracket(S/N-Merc-5488751/Mariner-5316380 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | No Longer Available, Swivel Bracket | NLA | |
2 | SEAL, Oil | 26-87735 | |
3 | BUSHING | 23-818764 | 23-67669 |
4 | O-RING | 25-33466 | |
5 | SPACER | 23-67668 | |
6 | FITTING, Grease | 22-8M0169589 | |
8 | TILT TUBE | 75121A2 | |
9 | SHIM | 15-67665 | |
10 | NUT, (.875-14) | 11-858869 | 11-30499 |
11 | CLAMP | 54-75264 | |
12 | SCREW | 10-75687 | |
12A | WASHER, (.192 x .375 x .0312) | 12-30164 | |
13 | CLAMP | 54-75275 | |
14 | No Longer Available, Nut | NLA | |
15 | BRACE | 67709 | |
16 | PIN | 67711 | |
17 | HANDLE | 78850 | |
18 | COTTER PIN | 18-25191 | |
19 | WASHER | 12-36001 | |
20 | LINK | 67714 | |
21 | SPRING | 24-67672 | |
22 | ROLL PIN, (.125 x 1.12) | 17-73194 | |
23 | WAVE WASHER | 13-78854 | |
24 | BOTTOM YOKE Comment: (BLACK) | 86580A1 | |
24 | BOTTOM YOKE Comment: (GRAY) | 86580A1 | |
25 | WASHER Comment: (EARLY STYLE) | 12-67664 | |
26 | RETAINING RING | 53-67684 | |
32 | WASHER | 12-67670 | |
33 | SWIVEL PINP/STEERING ARM Comment: (BLACK) | 17-840792A1 | |
33 | SWIVEL PIN/STEERING ARM Comment: (GRAY) | 17-840792A1 | |
34 | SCREW, (.437-20 x 7.50) | 10-8M0176309 | |
35 | MOUNT | 78687T | |
35 | MOUNT Comment: (HEAVY DUTY) | 77326 | |
36 | WASHER | 12-66921 | |
37 | WASHER | 12-78688 | |
38 | NUT, (.437-20) | 11-8M0204653 | |
39 | BUMPER | 67754 | |
40 | STEERING LINK | 75792A1 | |
41 | SCREW, (.375-24 x 1.25) | 10-849838 | 10-14000 |
42 | NUT, (.375-24) | 11-8M0204726 | |
43 | WASHER, (.406 x .734 x .063) SS | 12-34931 | |
44 | NUT, (.375-24) | 11-8M0204726 | |
45 | No Longer Available, Cover | NLA | |
46 | SCREW, (.250-20 x .620) | 10-28635 | |
47 | LOCKWASHER, (.250) | 13-26992 |
Throttle Lever and Shift Shaft
Back to TopBelow is the parts list for Mercury V-175 Throttle Lever and Shift Shaft:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | PIVOT | 74897T | |
2 | BALL JOINT ASSEMBLY | 62459T | |
3 | NUT, | 10-32,11-45076 | |
4 | ROD | 76035 | |
5 | NUT, | 10-32,11-46438 | |
6 | LEVER ASSEMBLY | 41094A3 | |
7 | SCREW, (.250-20 x 2.125) Comment: (1/4-20 THREAD) | 10-64022 | |
8 | NUT, ( #8-32) Comment: (1/4-20 THREAD) | 11-64015 | |
9 | CAP Comment: (1/4-20 THREAD) | 26852 | |
7 | SCREW Comment: (1/4-28 THREAD) | 10-75168 | |
8 | NUT, (.250-28) Comment: (1/4-28 THREAD) | 11-29598 | |
9 | CAP Comment: (1/4-28 THREAD) | 52023 | |
10 | SCREW, (.190-32 X 1.25) | 10-69560 | |
11 | NUT, | 10-32,11-68219 | |
12 | CAP | 48039 | |
13 | LEVER | 410952 | |
14 | SCREW, (.375-16 x 1.75) | 10-818165 | 10-55337 |
15 | BUSHING | 23-55164 | |
16 | BUSHING | 23-55171 | |
17 | SPRING | 24-55162 | |
18 | WASHER | 12-68410 | |
19 | SCREW, (.250-20 x 2.125) | 10-64022 | |
20 | NUT, ( #8-32) | 11-64015 | |
21 | CAP | 26852 | |
22 | LATCH | 39483 | |
23 | SCREW, (.250-28 x .88) | 10-69026 | |
24 | SPRING | 24-20099 | |
25 | NUT, (.250-28) | 11-826709109 | 11-33825, 11-35045 |
26 | ROD | 79949 | |
27 | BARREL | 8M0221994 | |
28 | THROTTLE CAM Comment: (Use W/Casting #'s 75906/85304/87125) | 86989 | |
28 | THROTTLE CAM Comment: (Use W/Casting #'s 85456/8712 /95790) | 95791 | |
29 | STUD, (.250-28 x 1.750) | 16-20353 | |
30 | BUSHING | 23-26856 | |
31 | NUT | 11-36069 | |
32 | SPRING | 24-41050 | |
33 | BRACKET | 814283A2 | |
34 | LATCH Comment: (DESIGN II) | 98889 | |
35 | SCREW, Drive Comment: (DESIGN II) | 10-42975 | |
36 | CUP Comment: (DESIGN II) | 39519 | |
38 | SPRING | 24-79977 | |
39 | LEVER KIT Comment: (DESIGN I) | 87609A1 | |
40 | SCREW, (.312-18 x .880) | 10-53167T | |
41 | GUIDE BLOCK | 37896 | |
42 | SPRING | 24-20099 | |
43 | LINK ROD ASSEMBLY | 67073A1 | |
44 | WEAR PLATE | 52100 | |
45 | LATCH | 8M0036768 | 38279 |
46 | WASHER, (.2656 x .625 x .0625) | 12-35462 | |
47 | NUT | 11-36069 | |
48 | SHIFT SHAFT Comment: (Long) SN# Mercury 5393736/Mariner 5316380 & Below | 75355A28 | |
48 | SHIFT SHAFT Comment: (X-Long) SN# Mercury 5393736/Mariner 5316380 & Below | 75355A29 | |
48 | SHIFT SHAFT ASSEMBLY Comment: (Long) SN# Mercury 5393737/Mariner 5316381 & Up | 79932A16 | |
48 | SHIFT SHAFT ASSEMBLY Comment: (X-Long) SN# Mercury 5393737/Mariner 5316381 & Up | 79932A17 | |
49 | WAVE WASHER | 13-29720 | |
50 | BUSHING | 23-26600 | |
51 | WASHER, (.2656 x .625 x .0625) | 12-35462 | |
52 | NUT | 11-36069 |
Transom Brackets(S/N-6618751 & Up)
Back to TopBelow is the parts list for Mercury V-175 Transom Brackets(S/N-6618751 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TRANSOM BRACKET Comment: (STBD. - BLACK) | 3401-8718F7 | |
2 | TRANSOM BRACKET Comment: (PORT-BLACK) | 3400-8716A8 | |
1 | TRANSOM BRACKET Comment: (STBD. - GRAY) | 3401-8718F8 | |
2 | TRAMSOM BRACKET Comment: (PORT-GRAY) | 3400-8716A9 | |
1 | TRANSOM BRACKET Comment: (STBD. - OYSTER) | 3401-8718F8 | |
2 | TRANSOM BRACKET Comment: (PORT-OYSTER) | 3400-8716A9 | |
3 | FITTING, Grease (PORT) | 22-8M0169588 | |
5 | TILT TUBE | 99170A2 | |
6 | NUT Comment: (BLACK) | 11-859133 | 11-34862, 11-90068F 3, 11-90068F 4 (BLACK) |
6 | NUT Comment: (GRAY) | 11-859133 | 11-34862, 11-90068F 3, 11-90068F 4 (GRAY) |
7 | O-RING | 25-45711 | |
8 | WAVE WASHER | 13-88750 | |
9 | NUT, (.875-14) | 11-858869 | 11-30499 |
10 | SCREW, (.500-20 x 4.500) | 10-8M0149747 | |
11 | WASHER | 12-8M0204648 | |
11 | WASHER Comment: (UPPER - OYSTER) | 12-24501 | |
12 | NUT | 11-91962 | |
13 | LEVER ASSEMBLY | 8M0115104 | 8M0115103, 99629T 2 |
14 | WAVE WASHER | 13-99611 | |
15 | NYLINER | 23-65830 | |
16 | KNOB Comment: (BLACK) | 99633 | |
16 | KNOB Comment: (GRAY) | 99633 | |
17 | PIN, Groove | 17-99615 | |
18 | SPRING | 24-99622 | |
19 | PIN, Groove | 17-99604 | |
20 | BOLT ASSEMBLY | 10-96930A1 | |
21 | NUT, (.375-24) | 11-23161 | |
- | GASKET SET, Engine Overhaul | 27-11338A88 |
Transom Brackets(S/N-Merc-5488751/Mariner-5316380 & Below)
Back to TopBelow is the parts list for Mercury V-175 Transom Brackets(S/N-Merc-5488751/Mariner-5316380 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | PORT TRANSOM BRACKET | 1474-7076 | |
2 | SCREW, (.500-20 x 6.500) | 10-677552 | |
3 | O-RING | 25-75320 | |
4 | WASHER | 12-8M0204648 | |
5 | NUT, (.500-20) | 11-35000 | |
6 | PIN | 17-25810 | |
7 | ROLL PIN | 17-75319 | |
8 | PORT TRIM STOP | 75293 | |
9 | SHAFT | 75292 | |
10 | STARBOARD TRIM STOP | 67718 | |
11 | No Longer Available, Transom Bracket (Starboard) | NLA | |
11A | CLAMP | 79279 | |
12 | CONNECTOR Comment: (STBD.) | 22-67666 | |
12 | CONNECTOR Comment: (PORT ) | 22-67667 | |
13 | WASHER | 12-8M0204648 | |
14 | NUT, (.500-20) | 11-35000 | |
15 | PAD | 76990 | |
16 | SCREW, (.50-20 X 3.50) | 10-76841 | |
17 | WASHER | 12-8M0204648 | |
18 | NUT, (.500-20) | 11-35000 | |
19 | TILT SENDER | 75290A1 | |
20 | SCREW, (#10-32 X .62) | 10-37656 | |
21 | WASHER, (.192 x .375 x .0312) | 12-30164 | |
22 | CLAMP | 54-75343 | |
23 | LOCATING PIN | 17-75688 | |
- | GASKET SET Comment: SN# 5875204 THRU 6618750 | 79583A91 | |
- | No Longer Available, Gasket Set Comment: (Service Bulletin 81-8) SN# USA-5875203/AUS-8072022 & Below | NLA |
Transom Brackets, S/N-ME-5488752-6618750/MA-5316381-6618750
Back to TopBelow is the parts list for Mercury V-175 Transom Brackets, S/N-ME-5488752-6618750/MA-5316381-6618750:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TRANSOM BRACKET Comment: (PORT-BLACK) | 1494-7476T1 | |
2 | TRANSOM BRACKET Comment: (STBD. - BLACK) | 1495-7478T1 | |
1 | TRANSOM BRACKET Comment: (PORT-GRAY) | 1494-7476T6 | |
2 | TRANSOM BRACKET Comment: (STBD.- GRAY) | 1495-7478T6 | |
3 | SCREW, (.500-20 x 6.500) | 10-677552 | |
4 | SCREW, (.500-20 x 4.500) | 10-8M0149747 | |
5 | WASHER | 12-8M0204648 | |
6 | NUT, (.500-20) | 11-35000 | |
7 | BOLT, (.500-20 x 11.00) | 10-87180 | |
8 | NUT, (.500-20) | 11-35000 | |
9 | TILT TUBE | 99170A2 | |
10 | WAVE WASHER | 13-88750 | |
11 | NUT, (.875-14) | 11-858869 | 11-30499 |
11 | NUT Comment: (1"-14 -BLACK) | 11-859133 | 11-34862, 11-90068F 3, 11-90068F 4 (1"-14 -BLACK) |
11 | NUT Comment: (1"-14 -GRAY) | 11-859133 | 11-34862, 11-90068F 3, 11-90068F 4 (1"-14 -GRAY) |
12 | O-RING, (.614 x .070) | 25-48462 | |
13 | PLATE | 85026T | |
14 | SCREW, (.250-20 x .750) | 10-28636 | |
15 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
16 | SPACER | 85035T | |
17 | SCREW, (.250-20 x 2.00) | 10-70732 | |
18 | WASHER, (.281 x .500 x .060) | 12-8M0204649 | |
19 | PLATE ASSEMBLY | 89949A1 | |
20 | SCREW, (.250-20 x .875) | 10-90192 | |
21 | CLAMP | 54-88512 | |
22 | SCREW, (#10-24 x .500) | 10-88829 | |
23 | LOCKWASHER, | 10,13-26996 | |
24 | TRIM CYLINDER ASSEMBLY | 79610A6 | |
- | REPAIR KIT | 79879A1 | |
25 | BUSHING | 23-86489 | |
26 | WASHER | 12-85022 | |
27 | SPRING | 24-30316 | |
28 | PIVOT PIN | 17-85020T | |
29 | SHAFT | 85024 | |
30 | BEARING | 23-86637 | |
31 | PIN | 17-91862 | |
32 | HOSE Comment: (PORT) | 32-89024A1 | |
32 | HOSE Comment: (STARBOARD) | 32-89023A2 | |
33 | GROMMET | 25-12602002 | |
34 | CONNECTOR | 22-87207 | |
35 | COVER | 87871T | |
36 | GASKET | 27-87775 | |
37 | GROMMET | 25-45507 | |
38 | SCREW, (#10-32 x 2.00) | 10-32866 | |
39 | WASHER | 12-20878 | |
40 | NUT, | 10-32,11-8M0204718 | |
- | GASKET SET | 27-79583A81 |
Trim Cylinder(S/N-Merc-5488751/Mariner-5555929 & Below)
Back to TopBelow is the parts list for Mercury V-175 Trim Cylinder(S/N-Merc-5488751/Mariner-5555929 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TRIM CYLINDER ASSEMBLY | 79114A4 | |
2 | PIN | 67694 | |
3 | SHAFT | 67701 | |
4 | WASHER | 12-67745 | |
5 | SCREW | 10-67756 | |
6 | WASHER | 12-48926 | |
7 | SPACER | 67698T | |
8 | COVER | 67700 | |
9 | SCREW, (.250-20 x 2.75) | 10-35049 | |
10 | SCREW, (.190-24 x .50) | 10-20665 | |
11 | SPACER | 23-67671 | |
12 | MANIFOLD | 67696 | |
13 | HYDRAULIC TUBE Comment: (STARBOARD) | 32-67683 | |
14 | HYDRAULIC TUBE Comment: (STARBOARAD - DOWN) | 32-67681 | |
15 | HYDRAULIC TUBE Comment: (STARBOARD - UP) | 32-67678 | |
16 | HYDRAULIC TUBE Comment: (PORT) | 32-67682 | |
17 | HYDRAULIC TUBE Comment: (PORT - UP) | 32-67680 | |
18 | HYDRAULIC TUBE Comment: (PORT - DOWN) | 32-67679 | |
19 | KEY, Woodruff | 28-20094 |
Wiring Harness, Starter Solenoid and Rectifier
Back to TopBelow is the parts list for Mercury V-175 Wiring Harness, Starter Solenoid and Rectifier:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | PLATE | 434292 | |
2 | SWITCH BOX | 332-7778A12 | |
3 | SCREW, (12-24 x 2.00) | 10-13669 | |
3 | SCREW, (#12-24 X 2.25) | 10-90815 | |
4 | SPACER (Use where Applicable) | 23-94304 | |
5 | BUSHING | 23-94453 | |
6 | CABLE ASSEMBLY | 84-62310A2 | |
7 | NUT, | 10-32,11-45076 | |
8 | WIRE ASSEMBLY | 84-60871A10 | |
9 | SCREW, (#10-16 x .375) | 10-62568 | |
10 | SCREW, (.190-32 X .62) | 10-38055 | |
11 | CABLE ASSEMBLY, (Black) | 84-65999A3 | |
12 | SCREW, (1.25) | 10-60411 | |
13 | LOCKWASHER, (.312) | 13-8M0204647 | |
14 | WASHER | 12-36042 | |
15 | WASHER, (Rubber) | 12-67264 | |
16 | BUSHING | 23-67268 | |
17 | RECTIFIER | 8M0058226 | 816770T, 816770, 62351A 1, 83-70350A 1, 83-70350A 3 |
18 | SCREW, (.190-32 X .62) | 10-38055 | |
19 | NUT, | 10-32,11-45076 | |
20 | MERCURY SWITCH Comment: (LEADS ATTACHED) | 58124A21 | |
20 | SWITCH ASSEMLBY Comment: (LEADS NOT ATTACHED) | 87-33386A3 | |
21 | SCREW, (.190-32 X .62) | 10-38055 | |
22 | NUT, | 10-32,11-45076 | |
23 | SCREW, (#10-32 x .50) | 10-22028 | |
24 | BATTERY CABLE Comment: (POSITIVE) | 84-88439A14 | |
24 | BATTERY CABLE Comment: (NEGATIVE) | 84-88439A2 | |
25A | ENGINE HARNESS | 84-87294A1 | |
25 | HARNESS | 84-96220A4 | |
26 | FUSE, (20 Ampere) | 88-8M0207796 | |
27 | CABLE ASSEMBLY | 84-95084A2 | |
28 | CABLE TIE, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
29 | SOLENOID ASSEMBLY, Starter Comment: (8-32 1/4 -20 Terminals) | 89-8M0185149 | |
29 | STARTER SOLENOID Comment: (10-32 5/16-18 Terminals) | 89-853654A1 | |
30 | NUT, Comment: (1/4 -20 Terminals) | 8-32,11-26419 | |
30 | NUT, Comment: (5/16-18 Terminals) | 10-32,11-68219 | |
31 | LOCKWASHER, (.250) Comment: (1/4 -20 Terminals) | 13-26992 | |
31 | LOCKWASHER, (.312) Comment: (5/16-18 Terminals) | 13-8M0204647 | |
32 | NUT, (.250-20) Comment: (1/4 -20 Terminals) | 11-94330 | |
32 | NUT, Comment: (5/16-18 Terminals) | 10-32,11-8M0204668 | |
33 | SCREW (5/8") | 10-20540 | |
34 | LOCKWASHER, (.250) | 13-26992 | |
35 | CABLE ASSEMBLY, (Black) | 84-65999A2 | |
36 | INSULATOR | 85-97861 | |
37 | VOLTAGE REGUALTOR (Use where Applicable) | 88825A7 | |
38 | SCREW, (#10-16 x .625) (Use where Applicable) | 10-48409 | |
39 | HARNESS ASSEMBLY (Use where Applicable) | 84-13397A1 | |
40 | NUT, (Use where Applicable) | 10-32,11-45076 | |
41 | FUSE HOLDER (Use where Applicable) | 134731 | |
42 | TERMINAL BLOCK (Use where Applicable) | 86-66986 | |
43 | SCREW, (.190-32 x .75) (Use where Applicable) | 10-22523 | |
44 | SCREW, (#10-32 x .50) (Use where Applicable) | 10-22028 | |
45 | WIRE ASSEMBLY (Orange)(Use where Applicable) | 84-62189A1 | |
46 | RETAINER (Use where Applicable) | 67237 | |
47 | SCREW, (#10-16 x .750) Comment: (Use where Applicable) | 10-69570 | |
48 | GROMMET (Use where Applicable) | 25-92012 | |
49 | GROUND WIRE ASSEMBLY Comment: (BLACK)(Use where Applicable) | 84-60466A10 | |
49 | CABLE Comment: (RED)(Use where Applicable) | 84-62824A1 |
Download this page as PDF: Click here
For Mercury Owners:
To assist you in maintaining and repairing your marine engines, we hope the following resources may be of use:
-
Mercury / Mercruiser / Mariner Parts from JLM Marine
- Mercury Thermostat
- Mercury Water Pump
- Mercury Water Pump Impeller
- Mercury Water Pump Impeller Kit
- Mercury Carburetor
- Mercury Carburetor Repair Kit
- Mercury Fuel Pump
- Mercury Fuel Pump Kit
- Mercury Air Filter
- Mercury Oil Filter
- Mercury Oil Seal
- Mercury Fuel Filter
- Mercury Gasket
- Mercury Relay
- Mercury Ignition Switch
- Mercury Trim Tilt Switch
- Mercury Ignition Sensor
- Mercury Spark Plug Wire
- Mercury Water Distribution Housing
- Mercury Bellow
- Mercury Bellows Kit
- Mercury Serpentine Pulley
- Mercury Accessories
- Mercury Belt
- Mercury Oil Plug
- Mercury Drain Plug
- Mercury Bellows Replacement Tool
About JLM Marine
Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.
As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.
We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.
Leave a comment
Please note, comments need to be approved before they are published.