Mercury 105 JET (0G303046 THRU 0G760299) Outboard Motor Parts Diagram & Catalog – Free PDF Download
Accessories
Back to TopBelow is the parts list for Mercury 105 JET Accessories:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | DECK FILL KIT, Oil | 15969A3 | |
- | FLUSHING ATTACHMENT | 44357Q2 | |
- | LINE ASSEMBLY, Fuel (8 Feet) Comment: (With Quick Disconnect) | 32-877680Q8 | |
- | LINE ASSEMBLY, Fuel (12 Feet) Comment: (With Quick Disconnect) | 32-877680Q12 | 32-858620Q12, 32-858620A12, 32-827927A12 (With Quick Disconnect) |
- | LINE ASSEMBLY, Fuel (8 Feet) Comment: (With Quick Disconnect Engine End Only) | 32-877681Q8 | |
- | LINE ASSEMBLY, Fuel (12 Feet) Comment: (With Quick Disconnect Engine End Only) | 32-877681Q12 | 32-804792Q12, 32-804792Q, 32-858621Q12, 32-858621A12, 32-17146A12 (With Quick Disconnect Engine End Only) |
- | LINE ASSEMBLY, Fuel (12 Feet) Comment: (No Fittings) | 32-877683Q12 | 32-858623Q12, 32-858623A12, 32-822379A12, 32-819380A12, FA599752, FS409752, 32-819380A 3, F216752, FA409752, F289752, FA178752, FA216752, FA284752, FA289752, FS409952 (No Fittings) |
- | MERCATHODE KIT | 88334A2 | |
- | MERCATHODE MONITOR | 86300A5 | |
- | HOSE EXTENSION KIT | 41729A3 | |
- | SWITCH KIT, Trim (10.00 Feet), With Or With Out Tiller | 87-18286A18 | |
- | VISUAL WARNING SYSTEM, Low Oil/Overheat | 17334A2 |
Attenuator Plate And Throttle Levers
Back to TopBelow is the parts list for Mercury 105 JET Attenuator Plate And Throttle Levers:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | PLATE ASSEMBLY, Sound Attenuator | 817495A1 | |
2 | GASKET | 27-892211 | |
3 | SCREW, (.250-28 x 2.500) | 10-884891 | |
4 | WASHER, (.281 x .734 x .063) | 12-69057 | |
5 | CAP | 19-815784 | 22-14685 |
6 | LINKAGE KIT | 828277A1 | |
7 | NOT SOLD SEPARATE, Throttle Level | NSS | |
8 | NOT SOLD SEPARATE, Throttle Level | NSS | |
9 | NOT SOLD SEPARATE, Throtlle Link | NSS | |
10 | ROLLER | 18178 | |
11 | SCREW, (#10-32 x .750) | 10-15124 | |
12 | WASHER, (.203 x .406 x .040) | 12-89302 | |
13 | LOCKWASHER, External | 10,13-69432 | |
14 | NOT SOLD SEPARATE, Decal-Caution Airbox | NSS | |
15 | DECAL, EPA Label Information Comment: (1998)(135/150) (135/150) (See Note) | 37-855577A12 | 37-855577 12 (1998)(135/150) (135/150) (See Note) |
15 | DECAL, EPA Label Information Comment: (1998)(XR6/Mag III/175/200) (XR6/Mag, III/175/200) (See Note | 37-855577A13 | 37-855577 13 (1998)(XR6/Mag III/175/200) (XR6/Mag, III/175/200) (See Note |
15 | DECAL, EPA Label Information Comment: (1998)(Export) (See Note) | 37-855920 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
Bleed System
Back to TopBelow is the parts list for Mercury 105 JET Bleed System:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TUBING, (20.00 Feet Bulk) (Cut to 9.00 Inch Length) | 32-892024122 | 32-99130122 |
2 | TUBING, (20.00 Feet Bulk) (Cut to 12.50 Inch Length) | 32-892024122 | 32-99130122 |
3 | TUBING, (20.00 Feet Bulk) (Cut to 14.00 Inch Length) | 32-892024122 | 32-99130122 |
4 | TUBING, (20.00 Feet Bulk) (Cut to 19.00 Inch Length) | 32-892024122 | 32-99130122 |
5 | TUBING, (20.00 Feet Bulk) (Cut to 24.00 Inch Length) | 32-892024122 | 32-99130122 |
6 | TUBING, (20.00 Feet Bulk) (Cut to 26 Inch Length) | 32-892024122 | 32-99130122 |
7 | CHECK VALVE | 21-426982 | |
8 | FITTING, Elbow | 22-822715 | |
9 | FITTING, Barbed | 22-56759 | |
10 | CHECK VALVE | 21-426233 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Bottom Cowl
Back to TopBelow is the parts list for Mercury 105 JET Bottom Cowl:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | BOTTOM COWL, Black Comment: (Black, Port) | 4022-828044A1 | |
1 | BOTTOM COWL ASSEMBLY, Gray Comment: (Port) | 4022-828044A2 | |
2 | BOTTOM COWL, Black Comment: (Black, Starboard) | 4022-828045A1 | |
2 | BOTTOM COWL ASSEMBLY, Gray Comment: (Starboard) | 4022-828045A2 | |
3 | SEAL, Cowl (41.00 Inches) | 8M0109217 | 8M0043272, 825318 1 |
4 | CLAMP | 54-822024 | |
5 | CLAMP | 54-822023 | |
6 | SCREW, (#10-16 x 1.12) | 10-92799 | |
7 | SCREW, (M6 x 40) | 10-82130040 | |
8 | RETAINER | 831209 | |
9 | PLUG | 19-821908 | |
10 | WASHER | 12-821915 | |
11 | CHECK VALVE | 8219631 | |
12 | O-RING, (.299 x .103) | 25-30641 | |
13 | FITTING | 22-821952 | |
14 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
15 | HOSE, Straight Comment: SN# 0G437999 & Below | 32-827332 | |
16 | CLAMP, Worm Gear Comment: SN# 0G437999 & Below | 54-F698772 | |
17 | CLAMP, Worm Gear Comment: SN# 0G437999 & Below | 54-815504212 | 54-8M2004076 SN# 0G437999 & Below |
18 | ELBOW, Cylinder Block (45 Degrees) Comment: SN# 0G437999 & Below | 22-60522 | |
15 | HOSE, S Hose Comment: SN# 0G438000 & Up | 32-8M0039077 | 32-832078 2 SN# 0G438000 & Up |
17 | CLAMP, Worm Gear Comment: SN# 0G438000 & Up | 54-815504212 | 54-8M2004076 SN# 0G438000 & Up |
18 | ELBOW, Cylinder Block Comment: SN# 0G438000 & Up | 22-8320761 | |
19 | FITTING, Tell-Tale | 22-8M0077650 | 821904 |
20 | HOSE, (57.00 Inches Bulk) (Cut to 8.00 Inch Length) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
21 | IDLE EXHAUST BOOT, Exhaust | 889847 | 828216 |
22 | CHECK VALVE ASSEMBLY, Drain | 21-817519A1 | |
23 | RETAINER, Use Where Applicable | 8M0032848 | 812443 1 |
24 | SWITCH | 87-8M0042301 | 87-896620, 87-856990, 87-850691, 87-18286A40 |
25 | SCREW, (M6 x 75) | 10-824868 | |
26 | FRONT HANDLE, Black Comment: (Black) | 889740A02 | 821253F 1, 821253F 2, 821253F 4 (Black) |
26 | FRONT HANDLE Comment: (Gray) | 889740A02 | 821253F 1, 821253F 2, 821253F 4 (Gray) |
27 | BUSHING | 23-335891 | |
28 | O-RING, (.614 x .070) | 25-48462 | |
29 | PAWL | 8219423 | |
30 | WASHER, (.281 x .734 x .063) | 12-69057 | |
31 | NUT, (M6) | 11-401196 | |
32 | SCREW, (#10-16 x .625) | 10-8214281 | |
33 | CLIP | 54-822873 |
Carburetor
Back to TopBelow is the parts list for Mercury 105 JET Carburetor:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
7 | JET, (.086) Comment: (135/150/175) | 1395-5815 | |
7 | JET, (.082) Comment: (XR6/Magnum III) | 1399-3518 | |
7 | JET, Main (.096) Comment: (200) | 1399-6249 | |
8 | JET, (.036) Comment: (135) (Starboard) | 1399-3026 | |
8 | JET, (.034) Comment: (150) (Starboard) | 1399-3251 | |
8 | JET, (.044) Comment: (XR6/Magnum III) (Starboard) | 810742 | |
8 | JET, (.030) Comment: (175) (Starboard) | 810741 | |
8 | JET, (.052) Comment: (Top) (200) (Starboard) | 815633052 | |
8 | JET, (.028) Comment: (Center/Bottom) (200) (Starboard) | 815633028 | |
9 | CAP | 810779 | |
10 | NOT SOLD SEPARATE, Idle Mixture Screw With Springs | NSS | |
11 | LEVER KIT | 1395-8113523 | |
12 | SPACER | 1395-6031 | |
13 | NOT SOLD SEPARATE, Spring | NSS | |
14 | NOT SOLD SEPARATE, Gasket-Fuel Bowl | NSS | |
15 | FLOAT ASSEMBLY | 810738 | |
16 | SHAFT | F10064 | |
17 | SCREW, (#6-32 x .187) | 1395-5902 | |
18 | VALVE SEAT KIT | 1395-8116901 | |
19 | NOT SOLD SEPARATE, Gasket Valve Seat | NSS | |
20 | BOWL, Fuel Comment: (Top) | 1395-8236231 | |
20 | BOWL, Fuel Comment: (Center/Bottom) | 1395-8236241 | |
21 | SCREW AND WASHER, (#8-32 x .750) | 1395-808612 | 1399-5132 |
22 | PLUG KIT | 1395-811694 | 1395-9596 1 |
23 | SEAL, Consists Of 4 Gaskets | 1395-802731 | |
24 | JET, (.072) Comment: (135) | 1395-6207 | |
24 | JET, (.074) Comment: (150/XR6/Magnum III) | 1399-3794 | |
24 | JET, (.078) Comment: (175) | 1395-6680 | |
24 | JET, (.080) Comment: (200) | 1395-6201 | |
24 | JET, (.082) Comment: (200-Top) | 1399-3518 | |
25 | TEE FITTING, Top/Center | 1395-7900 | |
26 | ELBOW, Bottom | 1395-7901 | |
- | GASKET SET, Carburetor | 8107493 | |
- | REPAIR KIT, Carburetor | 1395-8116913 |
Crankshaft, Pistons And Connecting Rods
Back to TopBelow is the parts list for Mercury 105 JET Crankshaft, Pistons And Connecting Rods:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CRANKSHAFT ASSEMBLY | 455-9536T4 | |
2 | BEARING, Ball, Lower | 30-67923T | |
3 | RING | 53-67446 | |
4 | GEAR SEGMENT KIT, Drive Comment: (Brown Gear) | 43-14513A09 | |
5 | SCREW, (#6-32 x .630) Socket Button Head Comment: (Brown Gear) | 10-854812 | |
6 | NUT, Special Comment: (Brown Gear) | 6-32,11-854811 | |
4 | GEAR SEGMENT KIT, Drive Comment: (Gray Gear) | 43-14513A09 | |
5 | SCREW, (#6-32 x .620) Socket Head Comment: (Gray Gear) | 10-813073 | |
6 | NUT, Special Comment: (Gray Gear) | 6-32,11-813134 | |
7 | CARRIER ASSEMBLY | 54196A6 | |
8 | PACKING | 65800 | |
9 | RING, Sealing, Crankshaft | 39-67377T | |
10 | BEARING KIT | 31-16756A6 | |
11 | PISTON Comment: (Starboard-Standard, 135/150) | 765-7441T32 | |
11 | PISTON Comment: (Starboard-.015 Over Sized, 135/150) | 765-7443A11 | |
11 | PISTON Comment: (Starboard-.030 OS., 135/150) | 765-7445T11 | |
11 | PISTON Comment: (Port-Standard, 135/150) | 765-7442T32 | |
11 | PISTON Comment: (Port-.015 Over Sized, 135/150) | 765-7444A11 | |
11 | PISTON Comment: (Port-.030 Over Sized, 135/150) | 765-7446A11 | |
12 | RING SET, Piston - Standard Comment: (Standard, 135/150) | 39-93481A12 | |
12 | RING SET, Piston - .015 Oversize Comment: (.015 Over Sized 135/150) | 39-78918A4 | |
12 | RING SET, Piston - .030 Oversize Comment: (.030 Over Sized, 135/150) | 39-85636A4 | |
13 | RING, Lock Comment: (135/150) | 53-857196 | 40-52035 (135/150) |
14 | NOT SOLD SEPARATE, Pision Pin Comment: (135/150) | NSS | |
11 | PISTON ASSEMBLY, Standard Comment: (Starboard Standard) (XR6 Magnum III 175/200) | 785-9738T9 | |
11 | PISTON ASSEMBLY, .015 Oversize Comment: (Starboard-.015 Over Sized) (XR6 Magnum III 175/200) | 785-9738T10 | |
11 | PISTON ASSEMBLY, Standard Comment: (Port Standard) (XR6 Magnum III 175/200) | 785-9737T9 | |
11 | PISTON ASSEMBLY, .015 Oversize Comment: (Port-.015 Over Sized) (XR6 Magnum III 175/200 | 785-9737A10 | |
12 | RING KIT, Piston - Standard Comment: (Standard) (XR6 Magnum III 175/200 | 39-822321A12 | 39-822321A 8, 39-824905A12 (Standard) (XR6 Magnum III 175/200 |
12 | RING KIT, Piston - .015 Oversize Comment: (.015 O.S.) (XR6 Magnum III 175/200) | 39-822321A1 | |
13 | RING, Lock Comment: (XR6 Magnum III 175/200) | 53-857196 | 40-52035 (XR6 Magnum III 175/200) |
14 | NOT SOLD SEPARATE, Pistion Pin Comment: (XR6 Magnum III 175/200) | NSS | |
15 | CONNECTING ROD KIT | 644-818141A13 | 644-818141A 2 |
16 | SCREW, (.312-24 x .875) | 10-763491 | |
17 | WASHER | 12-8M0012298 | 12-812876 |
18 | BEARING KIT | 8M0234886 | |
19 | BEARING, Needle | 29-8M0204691 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Cylinder Block And End Caps
Back to TopBelow is the parts list for Mercury 105 JET Cylinder Block And End Caps:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CYLINDER BLOCK Comment: (135/150) | 884-859211T2 | |
1 | CYLINDER BLOCK Comment: (XR6/Magnum ILI ) | 884-9763T23 | |
1 | CYLINDER BLOCK Comment: (175) | 884-9763T17 | |
1 | CYLINDER BLOCK Comment: (200) | 884-9763T61 | |
2 | STUD, Powerhead (1.75 Inch) | 16-8M0034455 | 16-818138 4 |
3 | STUD, (.375 x 5.620) (5.50 Inch) | 16-670654 | |
3 | STUD, (.375 x 6.870) (6.75 Inch) | 16-8M0034454 | 16-78438 5 |
4 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
5 | PIN, Bearing Race | 17-8M0036405 | 17-67296 |
6 | GASKET | 27-11338 | |
7 | COVER, Upper | 8M0088723 | 42249 1 |
8 | SCREW, (.312-18 x 1.500) Hex Flange, Hex Flange | 10-828213 | |
9 | COVER, Lower | 76867 | |
10 | SCREW, (.312-18 x 2.00) Hex Flange (Hex Head Flange) | 10-828214 | |
11 | BUSHING | 23-99448 | |
12 | SCREW, (.375-16 x 3.250) | 10-66717 | |
12 | SCREW, (.312-18 x 1.250) | 10-74824 | |
13 | END CAP ASSEMBLY, Upper | 1159-858521T1 | |
14 | O-RING, (2.800 x .103) | 25-54029 | |
15 | BEARING KIT | 31-16756A4 | |
16 | SEAL | 26-41953 | |
17 | SCREW AND LOCKWASHER, (.312-18 x 1.00) | 10-30225 | |
18 | STUD, (.190-32 x 1.870) | 16-15094 | |
19 | J CLIP | 54-63153 | |
20 | NOT SOLD SEPARATE, Plug-Serial Number | NSS | |
21 | SPACER | 23-67269 | |
22 | WASHER, (.187 x .500 x .062) Neoprene | 12-8M0204663 | |
23 | WING NUT, | 10-32,11-816874 | 11-73651, 11-816873, 11-90052 |
24 | IDLE SPEED CONTROL | 87076A10 | |
25 | SCREW, (#10-32 x .875) | 10-690201 | |
26 | WASHER, (.192 x .375 x .0312) Stainless Steel | 12-30164 | |
27 | BRACKET | 422482 | |
28 | SCREW, (.250-20 x .750) | 10-49668 | |
29 | STUD, (#10-32 x 1.00) | 16-8M0034435 | 16-15093 |
30 | CAP, Nylon | 26852 | |
31 | SCREW, (.250-20 x 2.125) | 10-64022 | |
32 | NUT, (.250-20) | 11-64015 | |
33 | END CAP ASSEMBLY | 1156-7809T1 | |
34 | O-RING, (3.237 x .103) | 25-62700 | |
35 | SEAL | 26-41953 | |
36 | SCREW, (.250-20 x .750) | 10-28636 | |
37 | LOCKWASHER, (.250) Stainless Steel | 13-26992 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Drive Shaft Housing And Exhaust Tube
Back to TopBelow is the parts list for Mercury 105 JET Drive Shaft Housing And Exhaust Tube:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | HOUSING ASSEMBLY, Driveshaft Comment: (Black, Long) | 1590-8343T10 | |
1 | HOUSING ASSEMBLY, Driveshaft Comment: (Gray, Long) | 1590-8343T11 | |
1 | HOUSING ASSEMBLY, Driveshaft Comment: (Black X-Long) | 3503-813563T1 | |
1 | HOUSING ASSEMBLY, Driveshaft Comment: (Gray X-Long) | 3503-813563T2 | |
1 | HOUSING ASSEMBLY, Driveshaft Comment: (Black - Jet) | 1590-8343A13 | |
1 | HOUSING ASSEMBLY, Driveshaft Comment: (Gray - Jet) | 1590-8343A14 | |
2 | STUD, (.437 x 2.69) | 16-56295 | |
3 | SCREW, (.500-20 x 6.00) | 10-898831 | 10-63474 |
4 | CABLE ASSEMBLY, Ground | 88238A10 | |
5 | MOUNT Comment: (135/150/175 Long) (Jet) | 78249 | |
5 | MOUNT Comment: (All Other Models) | 77327 | |
6 | WASHER, (.8125) | 12-49339 | |
7 | CABLE ASSEMBLY, Ground | 88238A10 | |
8 | NUT, (.500-20) | 11-898832 | 11-826708 17 |
9 | SCREW, (.250-20 x .500) Stainless Steel | 10-41508 | |
10 | WASHER, (.453 x .812 x .105) Stainless Steel | 12-45176 | |
11 | NUT, (.437-20) Stainless Steel | 11-8M0204653 | |
12 | CLAMP | 54-8M0036782 | 54-67076 |
13 | SCREW, (.312-18 x 1.250) | 10-66727 | |
14 | COVER, Black Comment: (Black) | 100-8M4500752 | 8M0001130, 67077T (Black) |
14 | COVER, Gray Comment: (Gray) | 67077F1 | |
15 | SCREW, (#12-24 x .620) | 10-88417 | |
16 | NUT | 11-35521 | |
17 | WASHER | 12-48926 | |
18 | NUT, (.437-20) Stainless Steel | 11-8M0204653 | |
19 | WASHER, (.406 x .734 x .063) | 12-20553 | |
20 | NUT | 11-69254 | |
21 | BOOT, Idle Exhaust | 8M0039081 | 828212 |
22 | PLUG | 19-64649 | |
23 | GASKET | 27-991734 | |
24 | SEAL, Lower | 66350001 | |
25 | TUBE, Exhaust | 18276T | |
26 | SEAL, Upper | 8M0039076 | 17726 1 |
27 | EXTENSION, Exhaust Comment: (135/175/XR6/Magnum III) | 812834A2 | |
27 | EXTENSION, Exhaust Comment: (150/200) (Jet) | 879288T71 | 41942 4 (150/200) (Jet) |
28 | TUBE, Water Comment: (LONG) (Jet) | 32-8M0042788 | 32-859097 1 (LONG) (Jet) |
28 | TUBE Comment: (X-Long) | 32-8M0042790 | 32-859097 2 (X-Long) |
29 | GASKET | 27-782461 | |
30 | PLATE ASSEMBLY | 18233A20 | |
31 | SEAL | 8M0043165 | 814701 2 |
32 | BRACKET | 68011 | |
33 | SCREW, (#10-16 x .500) | 10-878608 | 10-812832 |
34 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
35 | SEAL | 26-38970 | |
36 | SCREW, (.250-20 x .750) Stainless Steel | 10-90192 | |
37 | GASKET | 27-183076 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
Dual Engine Extension Kit
Back to TopBelow is the parts list for Mercury 105 JET Dual Engine Extension Kit:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | EXTENSION KIT, Dual Engine | 92876A9 | |
1 | O-RING, (.614 x .070) | 25-48462 | |
2 | TUBE ASSEMBLY | 71565A2 | |
3 | MOUNT | 41055 | |
4 | TAB WASHER | 14-42100 | |
5 | NUT, (.875-14) | 11-8M0041651 | 11-37984 |
6 | TAB WASHER | 88404 | |
7 | SCREW, (.250-28 x 1.250) | 10-38601 | |
8 | BRACKET | 17729A1 | |
9 | SCREW, (.312-24 x 1.250) | 10-62055 | |
10 | TAB WASHER | 17728 | |
11 | SCREW, (.375-24 x 1.38) | 10-140001 | |
12 | NUT, (.375-24) | 11-8M0204726 | |
13 | STEERING EYE | 8M0026167 | 8M0005848, 97933 1 |
14 | SLEEVE, (1.625) | 23-23651 | |
15 | TUBING, (4.00 Inches) | 97931 | |
16 | COUPLER, (15.00 Inches) | 8M0026098 | 814951 3 |
17 | NUT, (.562-18) | 11-42099 | |
18 | COUPLING | 22-821169 | |
19 | WASHER, (.406 x .734 x .063) Stainless Steel | 12-34931 | |
20 | SCREW, (.375-24 x 1.5) | 10-94319 |
Exhaust Manifold And Exhaust Plate
Back to TopBelow is the parts list for Mercury 105 JET Exhaust Manifold And Exhaust Plate:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GASKET | 27-190503 | |
2 | DIVIDER PLATE | 827323A2 | |
3 | SEAL, (12.50 Inches) | 26-814754 | 42838 1, 69668, 88726 |
4 | CLAMP | 54-814634 | |
5 | SCREW AND WASHER, (.312-18 x 1.500) | 10-8263561 | |
6 | FITTING, (.500-14) | 22-8144301 | |
7 | FITTING, (.250-18) (90 Degrees) | 22-920071 | |
8 | HOSE, (57.00 Inches Bulk) (Cut to 23.50 Inch Length) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
9 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
10 | COVER | 8M0039767 | 68729 1 |
11 | SCREW, (.312-18 x 1.250) | 10-74824 | |
12 | GASKET | 27-78690002 | |
13 | SCREW, (#10-16 x .750) | 10-69570 | |
14 | WASHER | 12-76451 | |
15 | DIAPHRAGM | 144791 | |
16 | DEFLECTOR, Water | 16496 | |
17 | PLATE | 16497A1 | |
18 | SPRING | 24-64878 | |
19 | WASHER | 12-85303 | |
20 | POPPET | 14480 | |
21 | GROMMET | 25-64872 | |
22 | CARRIER | 65848 | |
23 | GASKET | 27-991764 | |
24 | PLATE ASSEMBLY, Exhaust | 18260T2 | |
25 | CONNECTOR, (.125-27), Straight | 22-89772Q1 | |
26 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
27 | SEAL | 8M0043164 | 814701 1 |
28 | BRACKET | 680101 | |
29 | SCREW, (#10-16 x .500) | 10-878608 | 10-812832 |
30 | WASHER, (.406 x .734 x .063) | 12-20553 | |
31 | NUT | 11-69254 | |
32 | BUSHING | 23-27132 | |
33 | GROMMET | 25-8M0179867 | |
34 | GROMMET | 25-19565002 | |
35 | SCREW, (.312-18 x 1.250) | 10-66727 | |
36 | SCREW, (.312-18 x 2.50) | 10-68783 | |
37 | SCREW, (.375-16 x 3.50) | 10-898833 | 10-66725 |
38 | BRACKET ASSEMBLY, Front | 812905T | 812905A 5 |
39 | SCREW, (.3125-18 x .50) | 10-8055571 | |
39 | SCREW, (.312-18 x .625) | 10-90285 | |
40 | WASHER, (.330 x .750 x .060) Stainless Steel, Use With .625 Inch Reference #39 | 12-56720 | |
41 | WASHER | 12-187031 | |
42 | GROMMET | 25-18778001 | |
43 | BRACKET ASSEMBLY, Rear | 18578T09 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Flywheel/Starter Motor
Back to TopBelow is the parts list for Mercury 105 JET Flywheel/Starter Motor:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | COVER KIT | 18896A1 | |
2 | MARKER | 79022 | |
3 | SCREW, (.190-32 x .380) | 10-37572 | |
4 | WASHER, (.203 x .562 x .060) Stainless Steel | 12-72761 | |
5 | PLUG, Use Where Applicable | 19-89219001 | |
6 | PLUG, Yellow | 19-45907 | |
7 | NUT, (.625-18) | 11-52901 | |
8 | WASHER, (.641 x 1.250 x .190) | 12-33001 | |
9 | FLYWHEEL | 271-859238T16 | 271-859238T 8 |
10 | STATOR | 398-9610A19 | |
11 | SCREW, (#10-32 x 1.375) | 10-90045 | |
12 | LOCKWASHER, Stainless Steel | 10,13-26996 | |
13 | PLATE ASSEMBLY, Trigger | 96455A9 | |
14 | STARTER MOTOR ASSEMBLY | 50-893893 | 50-79472T 2, 50-79472 2 |
15 | COLLAR | 23-8M0034918 | 23-8M0001391, 56703 |
16 | STOP, Rubber | 8M0043376 | 68042 |
17 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel | 10-69035 | |
18 | CABLE ASSEMBLY, (6.00 Inches) Black | 84-93388A1 | |
19 | CABLE ASSEMBLY, Black | 84-93388A14 | |
20 | LOCKWASHER, (.250) Stainless Steel | 13-26992 | |
21 | NUT, (.250-20) Brass | 11-94330 | |
22 | NOT SOLD SEPARATE, Decal-In Gear Idle | NSS | |
23 | NOT SOLD SEPARATE, Decal-High Voltage | NSS | |
24 | NOT SOLD SEPARATE, Decal-Start In Gear | NSS | |
25 | NOT SOLD SEPARATE, Decal-Timing | NSS |
Fuel Lines
Back to TopBelow is the parts list for Mercury 105 JET Fuel Lines:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TUBING, (12.00 Inches Bulk) (Cut to 4.50 Inch Length) | 32-82381335 | |
2 | HOSE, (.187) (26.00 Inches Bulk) | 32-9912878 | |
3 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
4 | CONNECTOR, Tee | 22-818993 | |
5 | HOSE | 32-830760 | 32-19017 |
6 | CHECK VALVE | 22-8189941 | |
7 | TUBING, (28.00 Inches Bulk) (Cut to 2.00 Inch Length) | 32-8M0108349 | 32-8M0047448, 32-830757130, 32-830757 80 |
8 | HOSE | 32-830762 | 32-824001 |
9 | FILTER, Fuel | 35-816296Q2 | |
10 | HOSE, (57.00 Inches Bulk) (Cut to 11.00 Inch Length) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
11 | HOSE, (57.00 Inches Bulk) (Cut to 4.50 Inch Length) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 |
12 | GASKET | 27-828292 | |
13 | STUD, (.250-28 x 1.125) | 16-270372 | |
14 | LOCKWASHER, (.250) Stainless Steel | 13-26992 | |
15 | NUT, (.250-28) | 11-8267089 | |
16 | SCREW, (.250-20 x .880) | 10-55715 | |
17 | TUBING, (20.00 Feet Bulk) (Cut to 9.00 Inch Length) | 32-892024122 | 32-99130122 |
18 | HOSE, (.187) (26.00 Inches Bulk) (Cut to 4.50 Inch Length) | 32-9912878 | |
19 | HOSE, (.187) (26.00 Inches Bulk) | 32-9912878 | |
20 | VALVE ASSEMBLY, Enrichner | 42859A2 | |
21 | CLAMP Comment: (No Stamping) | 54-633001 | |
21 | CLAMP Comment: (Stamped '3') | 54-633003 | |
22 | SCREW, (.250-20 x .500) Stainless Steel | 10-73286 | |
23 | TUBING, (36.00 Inches Bulk) (Cut to 4.50 Inch Length) | 32-9912688 | |
24 | TUBING, (36.00 Inches Bulk) (Cut to 3.75 Inch Length) | 32-9912688 | |
25 | TERMINAL BLOCK | 86-45915 | |
26 | SCREW, (#10-16 x .600) | 10-878609 | 10-812832 1 |
25 | SCREW, (#10-16 x .380) | 10-878607 | 10-817626 |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
Fuel Pump
Back to TopBelow is the parts list for Mercury 105 JET Fuel Pump:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | PUMP ASSEMBLY, Fuel | 14360A78 | |
2 | DIAPHAGM KIT | 21-857005A1 | |
3 | NOT SOLD SEPARATE, Check Valve, Rubber | NSS | |
4 | NOT SOLD SEPARATE, Check Valve | NSS | |
5 | NOT SOLD SEPARATE, Retainer | NSS | |
6 | NOT SOLD SEPARATE, Gasket-Boost | NSS | |
7 | NOT SOLD SEPARATE, Cap | NSS | |
8 | NOT SOLD SEPARATE, Spring | NSS | |
9 | NOT SOLD SEPARATE, Diaphragm | NSS | |
10 | NOT SOLD SEPARATE, Gasket-Pulse | NSS | |
11 | NOT SOLD SEPARATE, Spring | NSS | |
12 | NOT SOLD SEPARATE, Cap | NSS | |
13 | GASKET | 27-8M0204705 | |
14 | BASE | 144303 | |
15 | PLATE | 987752 | |
16 | ELBOW | 22-996642 | |
17 | TUBING, (28.00 Inches Bulk) (Cut to 6.00 Inch Length) | 32-8M0108349 | 32-8M0047448, 32-830757130, 32-830757 80 |
18 | ELBOW | 22-996642 | |
19 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
20 | SCREW, (M6 x 50) | 10-82130050 | |
21 | SCREW, (M5 x 40) | 10-82104540 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Gear Housing Chart(S/N-0G437999 & Below)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing Chart(S/N-0G437999 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | GEAR HOUSING ASSEMBLY, Standard Rotation 2:1 Gear Ratio Comment: (Long) (Black) (135 And 150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T81 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 2:1 Gear Ratio Comment: (X-Long) (Black) (135 And 150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T82 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 2:1 Gear Ratio Comment: (Long) (Gray) (135 And 150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T87 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 2:1 Gear Ratio Comment: (X-Long) (Gray) (135 And 150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T88 | |
- | GEAR HOUSING ASSEMBLY, 2.3:1 Gear Ratio Comment: (Black) (High Altitude) (2.3:1 Gear Ratio) | 1647-9148A78 | |
- | GEAR HOUSING ASSEMBLY, 2.3:1 Gear Ratio Comment: (Gray) (High Altitude) (2.3:1 Gear Ratio) | 1647-9148A79 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 1.87:1 Gear Ratio Comment: (Long) (Black) (Standard Rotation 175 And 200 And XR6 And Magnum III 1.87:1 Gear Ratio) | 1647-9148T84 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 1.87:1 Gear Ratio Comment: ( X-Long) (Black) (Standard Rotation 175 And 200 And XR6 And Magnum III 1.87:1 Gear Ratio) | 1647-9148T85 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 1.87:1 Gear Ratio Comment: (Long) (Gray) (Standard Rotation 175 And 200 And XR6 And Magnum III 1.87:1 Gear Ratio) | 1647-9148T84 | |
- | GEAR HOUSING ASSEMBLY, Standard Rotation 1.87:1 Gear Ratio Comment: (X-Long) (Gray) (Standard Rotation 175 And 200 And XR6 And Magnum III 1.87:1 Gear Ratio) | 1647-9148T91 | |
- | GEAR HOUSING ASSEMBLY, Counter Rotation Comment: (X-Long) (Black) (135 And 150 Counter Rotation) | 1647-9148T83 | |
- | GEAR HOUSING ASSEMBLY, Counter Rotation Comment: (X-Long) (Gray) (135 And 150 Counter Rotation) | 1647-9148T89 | |
- | GEAR HOUSING ASSEMBLY, Counter Rotation Comment: (X-Long) (Black) (175 And 200 Counter Rotation) | 1647-9148T86 | |
- | GEAR HOUSING ASSEMBLY, Counter Rotation Comment: (X-Long) (Gray) (175 And 200 Counter Rotation) | 1647-9148T92 |
Gear Housing Chart(S/N-0G438000 & Up)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing Chart(S/N-0G438000 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | GEAR HOUSING ASSEMBLY Comment: (Long) (Black) (135/150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T81 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Black) (135/150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T82 | |
- | GEAR HOUSING ASSEMBLY Comment: (Long) (Gray) (135/150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T87 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Gray) (135/150 Standard Rotation 2:1 Gear Ratio) | 1647-9148T88 | |
- | GEAR HOUSING ASSEMBLY Comment: (Long) (Black) (Standard Rotation 175/200 XR6/Magnum III 1.87:1 Gear Ratio) | 1647-9148T84 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Black) (Standard Rotation 175/200 XR6/Magnum III 1.87:1 Gear Ratio) | 1647-9148T85 | |
- | GEAR HOUSING ASSEMBLY Comment: (Long) (Gray) (Standard Rotation 175/200 XR6/Magnum III 1.87:1 Gear Ratio) | 1647-9148T84 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Gray) (Standard Rotation 175/200 XR6/Magnum III 1.87:1 Gear Ratio) | 1647-9148T91 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Black) (135/150 Counter Rotation) | 1647-9148T83 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Gray) (135/150 Counter Rotation) | 1647-9148T89 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Black) (175/200 Counter Rotation) | 1647-9148T86 | |
- | GEAR HOUSING ASSEMBLY Comment: (X-Long) (Gray) (175/200 Counter Rotation) | 1647-9148T92 |
Gear Housing(Driveshaft-Counter-S/N-0G437999 & Below)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Driveshaft-Counter-S/N-0G437999 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Black) (Basic) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Black) (Basic) | 1647-9148T47 | |
2 | CONNECTOR ASSEMBLY | 22-85822A10 | |
3 | NOT SOLD SEPARATE, Tubing | NSS | |
4 | NOT SOLD SEPARATE, Connector | NSS | |
5 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
6 | STUD, (.438 x 3.82 Inches) | 16-8M0034464 | 16-18978 3 |
7 | STUD, (.437-14/.437-20 x 2.060) | 16-8M0133358 | |
8 | STUD, (.312 x 3.38) | 16-8M0034463 | 16-56297 2 |
9 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
10 | FILLER BLOCK | 8M0039169 | 67891 |
11 | BEARING ASSEMBLY, Roller | 31-42647A1 | |
12 | ANODE | 97-826134Q | 826134, 826134A 1 |
13 | SCREW, (M6 x 40) | 10-4000333 | |
14 | NUT, (M6) | 11-401386 | |
15 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-18572A 1) Comment: (2.0:1 Gear Ratio-14 Teeth) | NSS | |
15 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-18475A 1) Comment: (1.87:1Gear Ratio-15 Teeth) | NSS | |
16 | WASHER | 12-92721 | |
17 | NUT, (.625-18) | 11-35921 | |
18 | SHIM SET | 15-42637A1 | |
19 | FITTING KIT, Magnetic, Plug Fill/Drain | 22-8M0058389 | 22-67892A06 |
20 | WASHER, Fiber | 12-191833 | |
21 | SCREW KIT, (.375-16 x .250) | 10-79953Q04 | |
22 | TIE STRAP, (4.00 Inches) | 56762 | |
23 | SHIFT SHAFT | 789022 | |
24 | O-RING, (.862 x .103) | 25-25439 | |
25 | BUSHING ASSEMBLY | 23-77631A2 | |
26 | SEAL, Oil | 26-8M0204708 | |
27 | WASHER | 12-77674 | |
28 | DRIVESHAFT | 45-897625T | 45-44209 1 |
29 | BEARING, Roller | 31-8M0146566 | |
30 | NOT SOLD SEPARATE, Cup | NSS | |
31 | RETAINER | 8245191 | |
32 | BASE ASSEMBLY, Water Pump | 46-8M0077147 | 46-42579A 3 |
33 | GASKET | 27-8M0204678 | |
34 | O-RING, (2.175 x .175) | 25-8M0142854 | |
35 | SEAL, Oil | 26-89238 | |
36 | SEAL, Oil | 26-16977 | |
37 | GASKET | 27-8M0090319 | 27-85608 1 |
38 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
39 | FACE PLATE | 8M0204677 | |
40 | BODY ASSEMBLY, Water Pump | 46-96148T1 | |
41 | INSERT | 48752T | |
42 | SEAL | 26-38970 | |
43 | IMPELLER | 47-89984T3 | |
44 | KEY | 28-8M0214992 | |
45 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
46 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
47 | NUT, (.250-28) | 11-8267119 | |
48 | WASHER | 12-36001 | |
49 | NUT | 11-13436 | |
50 | SLEEVE | 23-29804T | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | REPAIR KIT, Water Pump | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 |
Gear Housing(Driveshaft-Counter-S/N-0G438000 & Up)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Driveshaft-Counter-S/N-0G438000 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Black) (Basic) | 1647-9148T93 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Gray) (Basic) | 1647-9148T94 | |
2 | CONNECTOR ASSEMBLY | 22-85822A10 | |
3 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
4 | STUD, (.438 x 3.82 Inches) | 16-8M0034464 | 16-18978 3 |
5 | STUD, (.437-14/.437-20 x 2.060) | 16-8M0133358 | |
6 | STUD, (.312-18/.324-24 x 3.380) | 16-8M0034463 | 16-56297 2 |
7 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
8 | FILLER BLOCK | 8M0039169 | 67891 |
9 | BEARING ASSEMBLY, Roller | 31-42647A1 | |
10 | ANODE | 97-826134Q | 826134, 826134A 1 |
11 | SCREW, (M6 x 40) | 10-4000333 | |
12 | NUT, (M6) | 11-401386 | |
13 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-828703A 1) Comment: (2.0:1 Gear Ratio - 14 Teeth) | NSS | |
13 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-828701A 1) Comment: (1.87:1Gear Ratio - 15 Teeth) | NSS | |
14 | WASHER Comment: (Included With Forward Gear Set) | 12-92721 | |
15 | NUT, (.625-18) Comment: (Included With Forward Gear Set) | 11-35921 | |
16 | SHIM SET Comment: (Included With Forward Gear Set) | 15-42637A1 | |
17 | FITTING KIT, Magnetic, Plug Fill/Drain | 22-8M0058389 | 22-67892A06 |
18 | SCREW KIT, (.375-16 x .250) | 10-79953Q04 | |
19 | WASHER, Fiber | 12-191833 | |
20 | TIE STRAP, (4.00 Inches) | 56762 | |
21 | SHIFT SHAFT | 789022 | |
22 | O-RING, (.862 x .103) | 25-25439 | |
23 | BUSHING ASSEMBLY | 23-77631A2 | |
24 | SEAL, Oil | 26-8M0204708 | |
25 | WASHER | 12-77674 | |
26 | DRIVESHAFT | 45-897625T | 45-44209 1 |
27 | BEARING, Roller | 31-8M0146566 | |
28 | RETAINER | 8245191 | |
29 | BASE ASSEMBLY, Water Pump | 46-8M0077147 | 46-42579A 3 |
30 | GASKET | 27-8M0204678 | |
31 | O-RING, (2.175 x .175) | 25-8M0142854 | |
32 | SEAL, Oil | 26-89238 | |
33 | SEAL, Oil | 26-16977 | |
34 | GASKET | 27-8M0090319 | 27-85608 1 |
35 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
36 | FACE PLATE | 8M0204677 | |
37 | BODY ASSEMBLY, Water Pump | 46-96148T1 | |
38 | INSERT | 48752T | |
39 | SEAL | 26-38970 | |
40 | IMPELLER | 47-89984T3 | |
41 | KEY | 28-8M0214992 | |
42 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
43 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
44 | NUT, (.250-28) | 11-8267119 | |
45 | WASHER | 12-36001 | |
46 | NUT | 11-13436 | |
47 | SLEEVE | 23-29804T | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | REPAIR KIT, Water Pump | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 |
Gear Housing(Driveshaft-Standard-S/N-0G437999 & Below)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Driveshaft-Standard-S/N-0G437999 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Black, Basic) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Gray, Basic) | 1647-9148T47 | |
2 | CONNECTOR ASSEMBLY | 22-85822A10 | |
3 | NOT SOLD SEPARATE, Tubing | NSS | |
4 | NOT SOLD SEPARATE, Connector | NSS | |
5 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
6 | STUD, (.437-14/.437-20 x 3.120) Comment: (Long) | 16-786382 | |
6 | STUD, (.438 x 3.82 Inches) Comment: (X-Long) | 16-8M0034464 | 16-18978 3 (X-Long) |
7 | STUD, (.437-14/.437-20 x 2.060) | 16-8M0133358 | |
8 | STUD, (.312 x 3.38) | 16-8M0034463 | 16-56297 2 |
9 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
10 | FILLER BLOCK | 8M0039169 | 67891 |
11 | BEARING ASSEMBLY, Roller | 31-42647A1 | |
12 | ANODE | 97-826134Q | 826134, 826134A 1 |
13 | SCREW, (M6 x 40) | 10-4000333 | |
14 | NUT, (M6) | 11-401386 | |
15 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-44102A7) Comment: (2.0:1 Gear Ratio-14 Teeth) | NSS | |
15 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-44104A8) Comment: (1.87:1 Gear Ratio-15 Teeth) | NSS | |
15 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-16294A2) Comment: (2.3:1 Gear Ratio-13 Teeth) | NSS | |
16 | WASHER, Not Used With High Altitude Comment: (Included With Forward Gear Set) | 12-92721 | |
17 | NUT, (.625-18) Comment: (Included With Forward Gear Set) | 11-35921 | |
17 | NUT Comment: (High Altitude) (Included With Forward Gear Set) | 11-87364 | |
18 | SHIM SET Comment: (Included With Forward Gear Set) | 15-42637A1 | |
19 | FITTING KIT, Magnetic, Plug Fill/Drain | 22-8M0058389 | 22-67892A06 |
20 | WASHER, Fiber | 12-191833 | |
21 | SCREW KIT, (.375-16 x .250) | 10-79953Q04 | |
22 | TIE STRAP, (4.00 Inches) | 56762 | |
23 | SHIFT SHAFT | 789022 | |
24 | O-RING, (.862 x .103) | 25-25439 | |
25 | BUSHING ASSEMBLY | 23-77631A2 | |
26 | SEAL, Oil | 26-8M0204708 | |
27 | WASHER | 12-77674 | |
28 | DRIVESHAFT Comment: (Long) | 45-897624T | 45-44000 1 (Long) |
28 | DRIVESHAFT Comment: (X-Long) | 45-897625T | 45-44209 1 (X-Long) |
28 | DRIVESHAFT Comment: (High Altitude) | 45-16292 | |
29 | BEARING, Roller | 31-8M0146566 | |
30 | NOT SOLD SEPARATE, Cup-Tapered | NSS | |
31 | RETAINER | 8245191 | |
32 | BASE ASSEMBLY, Water Pump | 46-8M0077147 | 46-42579A 3 |
33 | GASKET | 27-8M0204678 | |
34 | O-RING, (2.175 x .175) | 25-8M0142854 | |
35 | SEAL, Oil | 26-89238 | |
36 | SEAL, Oil | 26-16977 | |
37 | GASKET | 27-8M0090319 | 27-85608 1 |
38 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
39 | FACE PLATE | 8M0204677 | |
40 | BODY ASSEMBLY, Water Pump | 46-96148T1 | |
41 | INSERT | 48752T | |
42 | SEAL | 26-38970 | |
43 | IMPELLER | 47-89984T3 | |
44 | KEY | 28-8M0214992 | |
45 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
46 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
47 | NUT, (.250-28) | 11-8267119 | |
48 | WASHER | 12-36001 | |
49 | NUT | 11-13436 | |
50 | SLEEVE | 23-29804T | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | REPAIR KIT, Water Pump | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 |
Gear Housing(Driveshaft-Standard-S/N-0G438000 & Up)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Driveshaft-Standard-S/N-0G438000 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Black) (Basic) | 1647-9148T93 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Gray) (Basic) | 1647-9148T94 | |
2 | CONNECTOR ASSEMBLY | 22-85822A10 | |
3 | PIN, Dowel - Without Hole (.375 x .625) | 17-43044 | |
4 | STUD, (.437-14/.437-20 x 3.120) Comment: (Long) | 16-786382 | |
4 | STUD, (.438 x 3.82 Inches) Comment: (X-Long) | 16-8M0034464 | 16-18978 3 (X-Long) |
5 | STUD, (.437-14/.437-20 x 2.060) | 16-8M0133358 | |
6 | STUD, (.312-18/.324-24 x 3.380) | 16-8M0034463 | 16-56297 2 |
7 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
8 | FILLER BLOCK | 8M0039169 | 67891 |
9 | BEARING ASSEMBLY, Roller | 31-42647A1 | |
10 | ANODE | 97-826134Q | 826134, 826134A 1 |
11 | SCREW, (M6 x 40) | 10-4000333 | |
12 | NUT, (M6) | 11-401386 | |
13 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-828176A 2) Comment: (2.0:1 Gear Ratio - 14 Teeth) | NSS | |
13 | NOT SOLD SEPARATE, Pinion Gear (Part Of 43-828174A 2) Comment: (1.87:1Gear Ratio - 15 Teeth) | NSS | |
14 | WASHER Comment: (Included With Foward Gear Set) | 12-92721 | |
15 | NUT, (.625-18) Comment: (Included With Foward Gear Set) | 11-35921 | |
16 | SHIM SET Comment: (Included With Foward Gear Set) | 15-42637A1 | |
17 | FITTING KIT, Magnetic, Plug Fill/Drain | 22-8M0058389 | 22-67892A06 |
18 | SCREW KIT, (.375-16 x .250) | 10-79953Q04 | |
19 | WASHER, Fiber | 12-191833 | |
20 | TIE STRAP, (4.00 Inches) | 56762 | |
21 | SHIFT SHAFT | 789022 | |
22 | O-RING, (.862 x .103) | 25-25439 | |
23 | BUSHING ASSEMBLY | 23-77631A2 | |
24 | SEAL, Oil | 26-8M0204708 | |
25 | WASHER | 12-77674 | |
26 | DRIVESHAFT Comment: (Long) | 45-897624T | 45-44000 1 (Long) |
26 | DRIVESHAFT Comment: (X-Long) | 45-897625T | 45-44209 1 (X-Long) |
27 | BEARING, Roller | 31-8M0146566 | |
28 | RETAINER | 8245191 | |
29 | BASE ASSEMBLY, Water Pump | 46-8M0077147 | 46-42579A 3 |
30 | GASKET | 27-8M0204678 | |
31 | O-RING, (2.175 x .175) | 25-8M0142854 | |
32 | SEAL, Oil | 26-89238 | |
33 | SEAL, Oil | 26-16977 | |
34 | GASKET | 27-8M0090319 | 27-85608 1 |
35 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
36 | FACE PLATE | 8M0204677 | |
37 | BODY ASSEMBLY, Water Pump | 46-96148T1 | |
38 | INSERT | 48752T | |
39 | SEAL | 26-38970 | |
40 | IMPELLER | 47-89984T3 | |
41 | KEY | 28-8M0214992 | |
42 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
43 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
44 | NUT, (.250-28) | 11-8267119 | |
45 | WASHER | 12-36001 | |
46 | NUT | 11-13436 | |
47 | SLEEVE | 23-29804T | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | REPAIR KIT, Water Pump | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 |
Gear Housing(Propshaft-Counter-S/N-0G437999 & Below)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Propshaft-Counter-S/N-0G437999 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Basic, Black) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Basic, Gray) | 1647-9148T47 | |
67 | BEARING, Roller | 31-15841 | |
68 | THRUST RING | 12-17616 | |
69 | O-RING | 25-8M0214920 | |
70 | ADAPTOR ASSEMBLY, Bearing | 18447T2 | |
71 | BEARING, Roller | 31-15843T | |
72 | THRUST WASHER | 12-18448 | |
73 | BEARING, Thrust | 31-15842 | |
74 | PROPELLER SHAFT | 44-18446 | |
75 | CARRIER ASSEMBLY, Bearing | 818896T2 | |
76 | BEARING, Needle | 31-30956T | |
77 | SEAL, Inside | 26-8M0204670 | |
78 | SEAL, Outside | 26-8M0204670 | |
79 | KEY | 28-30281 | |
80 | TAB WASHER | 14-183231 | |
81 | RETAINER | 8M2011027 | 79448 |
82 | TRIM TAB | 31640T07 | |
83 | SCREW, (.437-14 x 1.750) | 10-8M0204686 | |
84 | SCREW, (.375-16 x 1.00) | 10-65210 | |
85 | WASHER, (.453 x .812 x .105) Stainless Steel | 12-45176 | |
86 | NUT, (.437-20) Stainless Steel | 11-8M0204653 | |
87 | THRUST HUB Comment: (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) | 12-835467Q01 | 12-835467 1 (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) |
88 | LOCKWASHER, Toothed Comment: (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) | 13-423511 | |
89 | WASHER, Splined Comment: (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) | 12-31211Q03 | |
90 | PROP NUT KIT, (.750-16) Comment: (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) | 11-52707Q1 | |
91 | TAB WASHER Comment: (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) | 14-816629Q | 14-816629, 14-31210, 14-816629B (These Replacement Parts AreNot Included With Complete Gear Housing Replacement) |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | SEAL KIT | 26-89238A2 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Basic, Black) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Basic, Gray) | 1647-9148T47 | |
51 | FOLLOWER ASSEMBLY | 89594A1 | |
52 | SHIFT CAM | 789562 | |
53 | ROD | 79911A1 | |
54 | PIN | 17-8M0084245 | 17-78906 |
55 | SPRING | 24-79910 | |
56 | WASHER | 12-78910 | |
57 | CUP, Bearing | 14469T | |
58 | BEARING ASSEMBLY, Ball | 30-88957T | |
59 | NOT SOLD SEPARATE, Reverse Gear (Part Of 43-18572A 1) Comment: (135/150) (2.0:1 - 14/28) | NSS | |
59 | NOT SOLD SEPARATE, Reverse Gear (Part Of 43-18475A 1) Comment: (175/200) (1.87:1 - 15/28) | NSS | |
60 | BEARING ASSEMBLY, Roller | 31-15844 | |
61 | CLUTCH | 52-823174T | 52-823174, 52-78959 |
62 | PIN, Detent | 17-78909 | |
63 | PIN, Cross | 17-8M0084243 | 17-78905 |
64 | SPRING | 24-78962 | |
65 | GEAR ASSEMBLY, Forward Comment: (135/150) (2.0:1 - 14/28) | 43-18572T1 | |
65 | GEAR ASSEMBLY, Forward Comment: (175/200) (1.87:1 - 15/28) | 43-18475T1 | |
66 | SPACER SHIM, (.125) | 23-176151 | |
66 | SPACER SHIM, (.127) | 23-176152 | |
66 | SPACER SHIM, (.129) | 23-176153 | |
66 | SPACER SHIM, (.131) | 23-176154 | |
66 | SPACER SHIM, (.133) | 23-176155 | |
66 | SPACER SHIM, (.135) | 23-176156 | |
66 | SPACER SHIM, (.137) | 23-176157 | |
66 | SPACER SHIM, (.139) | 23-176158 | |
66 | SPACER SHIM, (.141) | 23-176159 | |
66 | SPACER SHIM, (.143) | 23-1761510 | |
66 | SPACER SHIM, (.145) | 23-1761511 | |
66 | SPACER SHIM, (.147) | 23-1761512 | |
66 | SPACER SHIM, (.149) | 23-1761513 |
Gear Housing(Propshaft-Counter-S/N-0G438000 & Up)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Propshaft-Counter-S/N-0G438000 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Basic, Black) | 1647-9148T93 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Basic, Gray) | 1647-9148T94 | |
48 | FOLLOWER ASSEMBLY | 89594A1 | |
49 | SHIFT CAM | 789562 | |
50 | ROD | 828287 | |
51 | SHIM SET | 15-44491A1 | |
52 | ADAPTOR ASSEMBLY, Bearing | 828830A2 | |
53 | BEARING ASSEMBLY, Needle Rollers | 31-814653T | 31-814653, 31-814653001 |
54 | THRUST WASHER | 12-815481 | |
55 | BEARING, Thrust | 31-815480 | |
56 | GEAR ASSEMBLY, Reverse - 14/28 Comment: (135/150) | 43-828704A2 | |
56 | GEAR ASSEMBLY, Reverse - 15/28 Comment: (175/200) | 43-828702A2 | |
57 | BEARING ASSEMBLY, Roller | 31-15844 | |
58 | SPRING | 24-30893 | |
59 | SLIDING CLUTCH | 52-859340T | 52-854735T, 52-828288 |
60 | PIN, Cross | 17-8M0100263 | 17-8M0084681, 17-8M0020941, 17-30632 |
61 | PIN, Detent | 17-828356 | |
62 | PROPELLER SHAFT | 44-828951 | |
63 | GEAR ASSEMBLY, Forward - 14/28 Comment: (135/150) | 43-828703A1 | |
63 | GEAR ASSEMBLY, Forward - 15/28 Comment: (175/200) | 43-828701A1 | |
64 | SPACER SHIM , (.206) | 23-1761514 | |
64 | SPACER SHIM , (.208) | 23-1761515 | |
64 | SPACER SHIM, (.210) | 23-1761516 | |
64 | SPACER SHIM, (.212) | 23-1761517 | |
64 | SPACER SHIM, (.214) | 23-1761518 | |
64 | SPACER SHIM, (.216) | 23-1761519 | |
64 | SPACER SHIM, (.218) | 23-1761520 | |
64 | SPACER SHIM, (.220) | 23-1761521 | |
64 | SPACER SHIM, (.222) | 23-1761522 | |
64 | SPACER SHIM, (.224) | 23-1761523 | |
64 | SPACER SHIM, (.226) | 23-1761524 | |
64 | SPACER SHIM, (.228) | 23-1761525 | |
64 | SPACER SHIM, (.230) | 23-1761526 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Basic - Black) | 1647-9148T93 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Basic - Gray) | 1647-9148T94 | |
65 | BEARING, Thrust | 31-815480 | |
66 | THRUST WASHER | 12-815481 | |
67 | ADAPTOR ASSEMBLY, Bearing | 828831A3 | |
68 | BEARING ASSEMBLY, Needle Rollers | 31-814653T | 31-814653, 31-814653001 |
69 | THRUST WASHER | 12-18448 | |
70 | BEARING, Thrust | 31-15842 | |
71 | RACE, Thrust | 8182911 | |
72 | KEEPER | 814605 | |
73 | O-RING | 25-8M0214920 | |
74 | CARRIER ASSEMBLY, Bearing | 818290A4 | |
75 | BEARING, Needle | 31-30956T | |
76 | SEAL, Oil, Inside | 26-14077 | |
77 | SEAL, Outside | 26-8M0204670 | |
78 | TAB WASHER | 14-183231 | |
79 | KEY | 28-30281 | |
80 | RETAINER | 8M2011027 | 79448 |
81 | TRIM TAB | 31640T07 | |
81 | ANODE KIT Comment: (Tracker) | 97-76214Q5 | |
82 | SCREW, (.437-14 x 1.750) | 10-8M0204686 | |
83 | SCREW, (.375-16 x 1.00) | 10-65210 | |
84 | WASHER, (.453 x .812 x .105) Stainless Steel | 12-45176 | |
85 | NUT, (.437-20) Stainless Steel | 11-8M0204653 | |
86 | THRUST HUB Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-835467Q01 | 12-835467 1 (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) |
87 | LOCKWASHER, Toothed Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 13-423511 | |
88 | WASHER, Splined Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-31211Q03 | |
89 | PROP NUT KIT, (.750-16) Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 11-52707Q1 | |
90 | TAB WASHER Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 14-816629Q | 14-816629, 14-31210, 14-816629B (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) |
- | SEAL KIT | 26-89238A2 |
Gear Housing(Propshaft-Standard-S/N-0G437999 And Below)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Propshaft-Standard-S/N-0G437999 And Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Black, Basic) | 1647-9148T47 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Gray, Basic) | 1647-9148T47 | |
51 | FOLLOWER ASSEMBLY | 89594A1 | |
52 | SHIFT CAM | 789562 | |
53 | ROD | 79911A1 | |
54 | SPRING | 24-79910 | |
55 | PIN | 17-8M0084245 | 17-78906 |
56 | WASHER | 12-78910 | |
57 | GEAR SET Comment: (XR6/Magnum III/175/200) (1.87:1 - 15/28) | 43-44104A8 | |
57 | GEAR SET Comment: (135/150) (2.0:1 - 14/28) | 43-44102A7 | |
57 | GEAR SET Comment: (High Altitude) (2.3:1 - 13/30) | 43-16294A5 | |
58 | BEARING, Roller | 31-549281 | |
59 | SHIM SET (.002-3-5-10) | 15-47397A1 | |
60 | BEARING ASSEMBLY, Tapered Roller | 31-78172A1 | |
61 | CLUTCH | 52-823174T | 52-823174, 52-78959 |
62 | PIN, Cross | 17-8M0084243 | 17-78905 |
63 | PIN, Detent | 17-78909 | |
64 | SPRING | 24-78962 | |
65 | PROPELLER SHAFT | 44-94148 | |
66 | GEAR ASSEMBLY, Reverse Comment: (XR6/Magnum III/175/200) (1.87:1 - 15/28) | 43-824986A2 | |
66 | GEAR ASSEMBLY, Reverse Comment: (135/150) (2.0:1 - 14/28) | 43-824987A2 | |
66 | NOT SOLD SEPARATE, Reverse Gear Comment: (Part Of 43- 16294A 2) (2.3:1 - 13/30) | NSS | |
67 | SPACER, Not Used With High Altitude | 23-824108 | |
68 | RING, Thrust | 681001 | |
69 | BEARING ASSEMBLY, Ball | 30-88957T | |
70 | O-RING | 25-8M0214920 | |
71 | CARRIER ASSEMBLY, Bearing | 43567T1 | |
72 | BEARING, Needle | 31-30956T | |
73 | SEAL | 26-8M0204670 | |
74 | KEY | 28-30281 | |
75 | TAB WASHER | 14-79447 | |
76 | RETAINER | 8M2011027 | 79448 |
77 | TRIM TAB | 31640T07 | |
78 | SCREW, (.437-14 x 1.750) | 10-8M0204686 | |
79 | SCREW, (.375-16 x 1.00) Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 10-65210 | |
80 | WASHER, (.453 x .812 x .105) Stainless Steel Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-45176 | |
81 | NUT, (.437-20) Stainless Steel Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 11-8M0204653 | |
82 | THRUST HUB Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-835467Q01 | 12-835467 1 (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) |
83 | LOCKWASHER, Toothed Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 13-423511 | |
84 | WASHER, Splined Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-31211Q03 | |
85 | PROP NUT KIT, (.750-16) Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 11-52707Q1 | |
86 | TAB WASHER Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 14-816629Q | 14-816629, 14-31210, 14-816629B (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | SEAL KIT | 26-89238A2 |
Gear Housing(Propshaft-Standard-S/N-0G438000 & Up)
Back to TopBelow is the parts list for Mercury 105 JET Gear Housing(Propshaft-Standard-S/N-0G438000 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | GEAR HOUSING ASSEMBLY Comment: (Black) (Basic) | 1647-9148T93 | |
1 | GEAR HOUSING ASSEMBLY Comment: (Gray) (Basic) | 1647-9148T94 | |
48 | FOLLOWER ASSEMBLY | 89594A1 | |
49 | SHIFT CAM | 789562 | |
50 | ROD | 828287 | |
51 | GEAR SET Comment: (XR6/Magnum III/175/200) (1.87:1 - 15/28) | 43-878613A2 | |
51 | GEAR ASSEMBLY, Forward Comment: (135/150) (2.0:1 - 14/28) | 43-878615A2 | |
52 | SHIM SET (.006-7-9-10-20) | 15-44491A1 | |
53 | BEARING SET, Cup And Cone | 31-30894A1 | |
54 | BEARING, Needle | 31-30895T | |
55 | SLIDING CLUTCH | 52-859340T | 52-854735T, 52-828288 |
56 | PIN, Cross | 17-8M0100263 | 17-8M0084681, 17-8M0020941, 17-30632 |
57 | PIN, Detent | 17-828356 | |
58 | SPRING | 24-30893 | |
59 | PROPELLER SHAFT | 44-94148 | |
60 | GEAR ASSEMBLY, Reverse - 15/28 Comment: (XR6/Magnum III/175/200) | 43-828175A1 | |
60 | GEAR ASSEMBLY, Reverse - 14/28 Comment: (135/150) | 43-828177A1 | |
61 | SPACER | 23-824108 | |
62 | RING, Thrust | 681001 | |
63 | BEARING ASSEMBLY, Ball | 30-88957T | |
64 | O-RING | 25-8M0214920 | |
65 | CARRIER ASSEMBLY, Bearing | 43567T1 | |
66 | BEARING, Needle | 31-30956T | |
67 | SEAL, Oil, Inside | 26-14077 | |
68 | SEAL, Outside | 26-8M0204670 | |
69 | KEY | 28-30281 | |
70 | TAB WASHER | 14-79447 | |
71 | RETAINER | 8M2011027 | 79448 |
72 | TRIM TAB | 31640T07 | |
72 | ANODE KIT Comment: (Tracker) | 97-76214Q5 | |
73 | SCREW, (.437-14 x 1.750) | 10-8M0204686 | |
74 | SCREW, (.375-16 x 1.00) | 10-65210 | |
75 | WASHER, (.453 x .812 x .105) Stainless Steel Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-45176 | |
76 | NUT, (.437-20) Stainless Steel Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 11-8M0204653 | |
77 | THRUST HUB Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-835467Q01 | 12-835467 1 (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) |
78 | LOCKWASHER, Toothed Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 13-423511 | |
79 | WASHER, Splined Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 12-31211Q03 | |
80 | PROP NUT KIT, (.750-16) Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 11-52707Q1 | |
81 | TAB WASHER Comment: (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) | 14-816629Q | 14-816629, 14-31210, 14-816629B (These Replacement Parts Are Not Included With Complete Gear Housing Replacement) |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | SEAL KIT | 26-89238A2 |
Ignition Coil/Voltage Regulator
Back to TopBelow is the parts list for Mercury 105 JET Ignition Coil/Voltage Regulator:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | MOUNTING PLATE | 195872 | |
2 | STUD | 16-33778 | |
3 | BUSHING | 23-19661 | |
4 | LOCKWASHER, (.250) Stainless Steel | 13-26992 | |
5 | NUT, (.250-28) | 11-8267119 | |
6 | CABLE ASSEMBLY | 84-88807A35 | |
7 | REGULATOR, Voltage | 8M0084173 | 883072T, 854515T 1 |
8 | PLUG, Male | 13541 | |
9 | HARNESS ASSEMBLY (#2,4 & 6) | 84-69738A9 | |
9 | HARNESS ASSEMBLY (#1,3 & 5) | 84-69739A6 | |
10 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
11 | COVER | 43542 | |
12 | SCREW, (#10-32 x 2.125) | 10-90048 | |
13 | WASHER, (.203 x .406 x .040), Use Where Applicable | 12-89302 | |
14 | NUT, | 10-32,11-90078 | |
15 | CABLE ASSEMBLY | 84-88807A13 | |
16 | SCREW, (#10-32 x .500) Stainless Steel | 10-69022 | |
17 | COIL KIT | 339-832757A4 | |
18 | NUT, Brass | 10-32,11-45076 | |
19 | CABLE ASSEMBLY, High Tension | 84-813715A9 | |
20 | BOOT/TERMINAL KIT | 85-63709A1 | |
21 | SPARK PLUG (NGK #BU8H) | 33-13686Q | |
21 | SPARK PLUG (NGK #BUZ8H - Canada/Belgium) | 33-896329885 | |
22 | HARNESS ASSEMBLY | 84-826802A4 | |
23 | RELAY ASSEMBLY | 8M0207773 | |
24 | BRACKET | 828102 | |
25 | BUSHING | 23-8M0214955 | |
26 | GROMMET | 25-818967 | |
27 | WASHER, (.273 x .437 x .031) Stainless Steel | 12-35950 | |
28 | NUT/SCREW KIT | 11-13855A1 | |
29 | Not Sold Separate, Screw (#N.S.S.) | ||
30 | CABLE ASSEMBLY, Black (6.50 Inch) | 84-824912A8 |
Instrumentation
Back to TopBelow is the parts list for Mercury 105 JET Instrumentation:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | SWITCH ASSEMBLY, Lanyard | 87-19674A1 | |
2 | SCREW, (.190-16 x 1.750) Stainless Steel | 10-18303 | |
3 | ADAPTER | 813679 | 12051 |
4 | LANYARD ASSEMBLY | 15920Q54 | |
5 | SCREW, (#10-32 x 2.00) Stainless Steel | 10-32866 | |
6 | CLAMP, Mounting | 18321 | |
7 | WASHER, (.200 x .440 x .032) | 12-24676 | |
8 | NUT, Stainless Steel | 10-32,11-68219 | |
9 | RETAINER | 79146 | |
10 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
11 | DIODE ASSEMBLY | 812497A2 | |
12 | CABLE ASSEMBLY, (6.00 Inches) | 84-11149A2 |
Jet Components
Back to TopBelow is the parts list for Mercury 105 JET Jet Components:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | SCREW, (.190-32 x 1.62) | 10-88447 | |
2 | WASHER | 12-38833 | |
3 | SPACER | 23-94304 | |
4 | PLATE | 13381 | |
5 | REV LIMITER | 821889A30 | 821889A20 |
6 | HARNESS ASSEMBLY, Adaptor - Rev Limiter | 84-823147A5 | |
7 | GREASE KIT | 91-30500A2 | |
8 | BASE ASSEMBLY, Water Pump | 46-8M0077147 | 46-42579A 3 |
9 | GASKET | 27-8M0204678 | |
10 | SEAL, Oil | 26-89238 | |
11 | SEAL, Oil | 26-16977 | |
12 | GASKET | 27-8M0090319 | 27-85608 1 |
13 | GASKET | 27-858524 | 27-85609 1, 27-85609B 1 |
14 | FACE PLATE | 8M0204677 | |
15 | BODY ASSEMBLY, Water Pump | 46-96148T1 | |
16 | INSERT | 48752T | |
17 | SEAL | 26-38970 | |
18 | IMPELLER | 47-89984T3 | |
19 | KEY | 28-8M0214992 | |
20 | SCREW, (#14-8 x 2.25) | 10-8M0215009 | |
21 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
22 | NUT, (.250-28) | 11-8267119 | |
23 | SCREW, (.312-18 x 2.75) | 10-19924275 | |
24 | WASHER | 12-36001 | |
25 | SLEEVE | 23-29804T | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | REPAIR KIT, Water Pump | 46-96148A8 | |
- | SEAL KIT | 26-89238A2 |
Jet Pump Assembly
Back to TopBelow is the parts list for Mercury 105 JET Jet Pump Assembly:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | JET PUMP Comment: (Black) SN# 0G605661 & Below | 855766150 | 801400150, 801401150 (Black) SN# 0G605661 & Below |
- | JET PUMP Comment: (Gray) SN# 0G605661 & Below | 855766150 | 801400150, 801401150 (Gray) SN# 0G605661 & Below |
- | JET PUMP Comment: (With Aluminum Impeller) SN# 0G605662 & Up | 855766150 | 801400150, 801401150 (With Aluminum Impeller) SN# 0G605662 & Up |
- | JET PUMP ASSEMBLY Comment: (Jet 105 - With Stainless Steel Impeller) | 856143A2 | |
- | JET PUMP ASSEMBLY Comment: (Jet 140 - With Stainless Steel Impeller) | 856143A3 | |
1 | HOUSING, Pump Comment: SN# 0G605662 & Up | 803145T | 855767150 SN# 0G605662 & Up |
1 | HOUSING, Pump Comment: SN# 0G605661 & Below | 801411150 | |
2 | HOSE, Lube | 32-827490 | |
3 | SCREW, (.312-18 x 1.00) Comment: SN# 0G605661 & Below | 10-848497 | |
4 | SCREW, (.250-20 x .875) | 10-19923088 | |
4 | SCREW, (.312-18 x 1.00) | 10-848497 | |
5 | STUD, (.312-18 x 1.81) Comment: SN# 0G605662 & Up | 16-855840 | |
6 | NUT, (.312-18) | 11-82670910 | |
7 | HOUSING, Intake Comment: SN# 0G605662 & Up | 85576890 | |
7 | HOUSING, Intake Comment: SN# 0G605661 & Below | 80141290 | |
8 | LINER Comment: SN# 0G605662 & Up | 855771 | |
9 | LINER Comment: SN# 0G605661 & Below | 8271883 | |
10 | SHAFT, Drive Comment: SN# 0G605662 & Up | 45-8M0084524 | |
10 | SHAFT, Drive Comment: SN# 0G605661 & Below | 45-801413150 | |
11 | SLEEVE | 23-8271891 | |
12 | NUT | 11-8271901 | |
13 | WASHER | 12-36001 | |
14 | IMPELLER Comment: (Aluminum) SN# 0G605662 & Up | 47-855770150 | |
14 | IMPELLER Comment: (Jet 105 - Stainless Steel) | 47-803984T | 47-801414150, 47-855708150 (Jet 105 - Stainless Steel) |
14 | IMPELLER Comment: (Jet 140 - Stainless Steel) | 47-803985T | 47-855708200 (Jet 140 - Stainless Steel) |
14 | IMPELLER Comment: SN# 0G605661 & Below | 47-803984T | 47-801414150, 47-855708150 SN# 0G605661 & Below |
15 | KEY | 28-801405875 | |
16 | SHIM, Impeller | 15-801404875 | |
17 | TAB WASHER | 14-801403875 | |
18 | SCREW, (.250-20 x .625) | 10-19923062 | |
19 | SCREW, (.312-18 x 1.250) | 10-60411 | |
20 | BRACKET, Cable Support | 801410 | |
21 | NUT, (.312-18) | 11-82670910 | |
22 | PIN, Dowel | 17-801407 | |
23 | STUD, (.437-14/.437-20 x 3.120) | 16-786382 | |
24 | STUD, (.437-14/.437-20 x 2.060) | 16-8M0133358 | |
25 | NUT, (.437-20) Stainless Steel | 11-8M0204653 | |
26 | WASHER | 12-48926 | |
27 | WASHER, (.453 x .812 x .105) Stainless Steel | 12-45176 | |
28 | STUD, (.250-20/.250-28 x 3.125) | 16-306671 | |
29 | SCREW, (.375-16 x 3.00) Stainless Steel | 10-68299 | |
30 | WASHER, (.406 x .750 x .104) | 12-8M0214963 |
Miscellaneous Information
Back to TopBelow is the parts list for Mercury 105 JET Miscellaneous Information:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
0 | PARTS MANUAL, 135/150/175/200 XR6 MAGNUM III 105-140 JET, Parts | 90-81609896 | |
0 | OWNERS MANUAL | 90-10126980 | |
0 | OWNERS MANUAL Comment: (Jet Models) | 90-10140980 | |
0 | SERVICE MANUAL | 90-824052R3 | |
0 | DECAL SET Comment: (Black Long 135) | 37-813220A00 | 37-813220A96 (Black Long 135) |
0 | DECAL SET Comment: (Black XL/CXL Offshore 135) | 37-830169A00 | 37-830169A99, 37-830169A96 (Black XL/CXL Offshore 135) |
0 | DECAL SET Comment: (Black Long 150) | 37-824103A96 | |
0 | DECAL SET Comment: (Black XL/CXL Offshore - 2.0L, 150) | 37-809687A99 | 37-809687A96 (Black XL/CXL Offshore - 2.0L, 150) |
0 | DECAL SET Comment: (Black XL/CXL Offshore - 2.5L, 150) | 37-802577A98 | |
0 | DECAL SET Comment: (Black Long, 175) | 37-824911A00 | 37-824911A96 (Black Long, 175) |
0 | DECAL SET Comment: (Black XL/CXL Offshore, 175) | 37-809688A00 | 37-809688A99, 37-809688A96, 37-855418A99, 37-855418A97 (Black XL/CXL Offshore, 175) |
0 | DECAL SET Comment: (XR6) | 37-808552A00 | 37-808552A96 (XR6) |
0 | DECAL SET Comment: (Black Long, 200) | 37-812563A00 | 37-808554A96, 37-812563A96 (Black Long, 200) |
0 | DECAL SET Comment: (Black 200 XL/CXL Offshore, 200) | 37-808562A03 | 37-808562A00, 37-808558A99, 37-808558A96, 37-808562A99, 37-808562A96 (Black 200 XL/CXL Offshore, 200) |
0 | DECAL SET Comment: (Black 105 Jet) | 37-826331A96 | |
0 | DECAL SET Comment: (Black 140 Jet) | 37-826333A00 | 37-826333A96 (Black 140 Jet) |
0 | DECAL SET Comment: (Gray 135 Long) SN# 0G437999 & Up | 37-813036A97 | 37-813036A96 (Gray 135 Long) SN# 0G437999 & Up |
0 | DECAL SET Comment: (Gray 135 XL/CXL) SN# 0G437999 & Below | 37-850397A00 | 37-850397A97, 37-824106A96 (Gray 135 XL/CXL) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 150 Long) SN# 0G437999 & Below | 37-850398A97 | 37-824104A96 (Gray 150 Long) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 150 XL/CXL) SN# 0G437999 & Below | 37-809707A97 | 37-809707A96 (Gray 150 XL/CXL) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Magnum III) SN# 0G437999 & Below | 37-813034A01 | 37-804694A00, 37-813034A97, 37-813034A96 (Magnum III) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 175 Long) SN# 0G437999 & Below | 37-813037A97 | 37-813037A96 (Gray 175 Long) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 175 XL/CXL) SN# 0G437999 & Below | 37-809705A97 | 37-809705A96 (Gray 175 XL/CXL) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 200 Long) SN# 0G437999 & Below | 37-808563A03 | 37-808563A01, 37-808563A00, 37-808563A97, 37-808563A96, 37-815630A97, 37-815630A96 (Gray 200 Long) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 200 XL/CXL) SN# 0G437999 & Below | 37-808563A03 | 37-808563A01, 37-808563A00, 37-808563A97, 37-808563A96, 37-815630A97, 37-815630A96 (Gray 200 XL/CXL) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 105 Jet) SN# 0G437999 & Below | 37-826332A97 | 37-826332A96 (Gray 105 Jet) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 140 Jet) SN# 0G437999 & Below | 37-826334A97 | 37-826334A96 (Gray 140 Jet) SN# 0G437999 & Below |
0 | DECAL SET Comment: (Gray 135 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-813036A97 | 37-813036A96 (Gray 135 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 135 XL/CXL) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-850397A00 | 37-850397A97, 37-824106A96 (Gray 135 XL/CXL) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 150 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-850398A97 | 37-824104A96 (Gray 150 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 150 XL/CXL - 2.0L) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-809707A97 | 37-809707A96 (Gray 150 XL/CXL - 2.0L) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 150 XL/CXL - 2.5L) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-802578A98 | |
0 | DECAL SET Comment: (Magnum III) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-813034A01 | 37-804694A00, 37-813034A97, 37-813034A96 (Magnum III) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 175 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-813037A97 | 37-813037A96 (Gray 175 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 175 XL/CXL) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-809705A97 | 37-809705A96 (Gray 175 XL/CXL) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 200 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-808563A03 | 37-808563A01, 37-808563A00, 37-808563A97, 37-808563A96, 37-815630A97, 37-815630A96 (Gray 200 Long) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 200 XL/CXL) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-808563A03 | 37-808563A01, 37-808563A00, 37-808563A97, 37-808563A96, 37-815630A97, 37-815630A96 (Gray 200 XL/CXL) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 105 Jet) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-826332A97 | 37-826332A96 (Gray 105 Jet) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (Gray 140 Jet) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-826334A97 | 37-826334A96 (Gray 140 Jet) (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL, Striping, Roll Of 25 Feet. - Need 6 Feet Comment: (Also Order Striping Decal Listed Below) SN# 0G438000 & Up | 37-824911A25 | 37-824911 (Also Order Striping Decal Listed Below) SN# 0G438000 & Up |
0 | DECAL SET Comment: (150 By Mercury, Tracker) | 37-824736A96 | |
0 | DECAL SET Comment: (175 By Mercury, Tracker) | 37-808620A96 | |
0 | DECAL SET Comment: (XR6 By Mercury, Tracker) | 37-809846A96 | |
0 | DECAL SET Comment: (200 By Mercury, Tracker) | 37-808681A01 | 37-808681A96 (200 By Mercury, Tracker) |
0 | DECAL SET Comment: (150 By Mariner, Tracker) | 37-809849A96 | |
0 | DECAL SET Comment: (Magnum III By Mariner, Tracker) | 37-809850A96 | |
0 | DECAL SET Comment: (175 By Mariner, Tracker) | 37-809851A96 | |
0 | DECAL SET Comment: (200 By Mariner, Tracker) | 37-809852A96 | |
0 | DECAL, EPA Label Information Comment: (135/150) (1998) (See Note) | 37-855577A12 | 37-855577 12 (135/150) (1998) (See Note) |
0 | DECAL, EPA Label Information Comment: (XR6/Magnum III/175/200) (1998) (See Note) | 37-855577A13 | 37-855577 13 (XR6/Magnum III/175/200) (1998) (See Note) |
0 | DECAL, EPA Label Information Comment: (Export) (1998) (See Note) | 37-855920 |
Oil Injection Components
Back to TopBelow is the parts list for Mercury 105 JET Oil Injection Components:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | SENSOR ASSEMBLY | 12430A4 | |
2 | SCREW, (#10-16 x .600) | 10-878609 | 10-812832 1 |
3 | WARNING MODULE ASSEMBLY | 41470A26 | |
4 | WASHER, (.192 x .375 x .0312) Stainless Steel | 12-30164 | |
5 | SCREW, (#10-32 x .875) | 10-690201 | |
6 | BRACKET KIT | 12335A1 | |
7 | CORD/HOOK KIT | 12323A1 | |
8 | TANK | 1257-87421 | |
9 | CAP ASSEMBLY | 36-43298A2 | |
10 | O-RING, (2.225 x .210) | 25-11332 | |
11 | HOUSING ASSEMBLY, Adapter | 816190A4 | |
12 | O-RING, (2.225 x .210) | 25-11332 | |
13 | TUBE | 32-99802 | |
14 | CHECK VALVE, Crankcase | 21-8781051 | |
15 | NOT SOLD SEPARATE, Plug | NSS | |
16 | HOSE, (114.00 Inches) | 32-99439 | |
17 | PUMP, Oil Comment: (135/150) | 815698T | 815698, 41032 (135/150) |
17 | PUMP ASSEMBLY, Oil Comment: (XR6/Magnum III/175/200) | 815699T | 815699, 41033 (XR6/Magnum III/175/200) |
18 | BUSHING, Worm | 8141032 | |
19 | O-RING | 25-11379 | |
20 | BEARING ASSEMBLY, Drive Gear | 23-41429A2 | |
21 | GEAR, Driven | 43-14563 | |
22 | SCREW, (#10-32 x .625) | 10-32228 | |
22 | SCREW, (#10-32 x 1.120) | 10-41507 | |
23 | LINK ASSEMBLY | 193855 | |
24 | FITTING Comment: SN# 0G438000 & Up | 22-8M0207780 | |
24 | FITTING, Oil Tubing Comment: SN# 0G437999 & Below | 22-424252 | |
25 | NOT SOLD SEPARATE, Plug | NSS | |
26 | HOSE, (57.00 Inches Bulk) Comment: (Cut to 6.00 Inch Length) | 32-8M0108355 | 32-8M0047428, 32-830756109, 32-99127109, 32-877821 (Cut to 6.00 Inch Length) |
27 | RESERVOIR | 994436 | |
28 | SCREW, (#10-32 x .875) | 10-690201 | |
29 | WASHER | 12-42118 | |
30 | GROMMET | 25-42117 | |
31 | BUSHING | 23-42116 | |
32 | TUBING, (25.00 Inches Bulk) (Cut to 4.75 Inch Length) | 32-82381455 | |
33 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
34 | CAP ASSEMBLY | 36-43300A9 | |
35 | FLOAT ASSEMBLY | 8M0187298 | |
36 | PUSH NUT | 11-99265 | |
37 | GASKET | 27-43307T | |
38 | NOT SOLD SEPARATE, Decal - Reservoir Warning | NSS | |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Power Trim Components
Back to TopBelow is the parts list for Mercury 105 JET Power Trim Components:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | TRIM AND TILT ASSEMBLY | 855998A11 | 855998A08, 855998A07, 855998A10, 855998A09, 855998A05, 855998A 3 |
1 | MANIFOLD ASSEMBLY | 811604F | 811604T |
2 | PLUG, Pipe (.0625-27) | 22-56800 | |
3 | CYLINDER ASSEMBLY | 880952A03 | 880952A02, 880952A 1 |
4 | ROD KIT, Trim Piston | 823553T | 823553, 811609 |
5 | GUIDE KIT | 878239A02 | 878239A 1 |
6 | REPAIR KIT | 811607A1 | |
7 | CHECK VALVE KIT | 811610A1 | |
8 | GUIDE ASSEMBLY | 1100-8M0021648 | 878243A 1 |
9 | PISTON/ROD ASSEMBLY, Power Trim Comment: (Port) | 878413A1 | |
9 | PISTON/ROD ASSEMBLY, Power Trim Comment: (Starboard) | 878414T01 | 878414A 1 (Starboard) |
10 | TRIM FILTER ASSEMBLY | 35-12184A1 | |
11 | MANUAL RELEASE ASSEMBLY | 893929A01 | 813442A 2 |
12 | E RING | 53-815949001 | 53-812844, 53-835104 |
13 | O-RING KIT | 811612A3 | |
14 | PUMP | 811617T1 | |
15 | PLUG ASSEMBLY | 19-811613 | |
16 | SCREW, (M6 x 14) | 10-4000327 | |
17 | WASHER | 12-4002315 | |
18 | COVER | 811611 | |
19 | DRIVE JOINT | 828710 | |
20 | MOTOR ASSEMBLY Comment: (Breakdown On Power Trim Motor) | 878265A4 | |
21 | SCREW Comment: (Long) | 10-881768A1 | |
21 | SCREW Comment: (Short) | 10-811616 | |
22 | SHAFT ASSEMBLY | 8M0142997 | |
23 | PLUG, Pipe (.0625-27) | 22-56800 | |
24 | PIN, Groove | 17-878267 | 17-44431 |
25 | PIN, Trilobe | 17-821539 | 17-13794, 17-19603 |
26 | SHAFT | 99625002 | |
27 | ANODE KIT | 97-818298Q1 | |
28 | SCREW, (M6 x 25) | 10-8M0204707 | |
29 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
30 | SCREW, (M10 x 30) | 10-4000377 | |
31 | WASHER | 12-4002319 | |
32 | CLIP | 54-22875 | |
33 | SCREW, (#10-16 x .600) | 10-878609 | 10-812832 1 |
34 | C WASHER | 8M0084613 | 69205 |
35 | STRIKER PLATE | 8M0045383 | 99630 1 |
36 | LOCKWASHER, (.375) | 13-58643 | |
37 | NUT, (.375-24) | 11-46335 |
Power Trim Motor
Back to TopBelow is the parts list for Mercury 105 JET Power Trim Motor:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | MOTOR ASSEMBLY | 878265A4 | |
1 | BRUSH AND SEAL KIT | 828714A1 | |
2 | ARMATURE KIT | 828713T1 | |
3 | END FRAME, Complete | 828715A1 |
Reed Block And Cylinder Head
Back to TopBelow is the parts list for Mercury 105 JET Reed Block And Cylinder Head:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | CYLINDER HEAD Comment: (135/150) | 18787A18 | |
2 | GASKET Comment: (135/150) | 27-18785T | |
1 | CYLINDER HEAD Comment: (XR6/ Magnum III 175) | 900-8M0143213 | |
2 | GASKET Comment: (XR6/ Magnum III 175) | 27-822844T05 | 27-822844T04, 27-822844 1, 27-822844004 (XR6/ Magnum III 175) |
1 | CYLINDER HEAD ASSEMBLY Comment: (200) | 18488F2 | |
2 | GASKET Comment: (200) | 27-822844T05 | 27-822844T04, 27-822844 1, 27-822844004 (200) |
3 | SCREW, (.375-16 x 2.30) | 10-98534 | |
4 | PIN, Dowel (.250 x .625) | 17-63779 | |
5 | GASKET | 27-8M0204714 | |
6 | COVER KIT | 90390A1 | |
7 | THERMOSTAT | 75692 | |
8 | SCREW, (.312-18 x 1.00) | 10-35386 | |
9 | FITTING, (.250-18) 90 Degree - Brass | 22-687271 | |
10 | SENDER, Temperature, Starboard | 97465 | |
11 | VALVE, Thermal Air | 814612 | |
12 | HOSE, (59.00 Inches Bulk) (Cut to 12.75 Inch Length) | 32-77653101 | |
13 | FITTING | 22-68728 | |
14 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
15 | HOSE, (59.00 Inches Bulk) (Cut to 11.50 Inch Length) | 32-77653101 | |
16 | T-FITTING | 22-815914 | |
17 | SENSOR ASSEMBLY, Temperature, Port, 2-Wire | 13536A7 | |
18 | RETAINER | 137151 | |
19 | SCREW, (.312-18 x .500) | 10-98257 | |
20 | HOSE, (59.00 Inches Bulk) (Cut to 7.50 Inch Length) | 32-77653101 | |
21 | PLATE ASSEMBLY | 43517A9 | |
22 | SCREW, (.250-20 x .875) Stainless Steel | 10-28668 | |
23 | GASKET | 27-146972 | |
24 | REED BLOCK | 855952T3 | |
25 | J CLIP | 54-8M0024808 | |
26 | CLIP | 54-23567 | |
27 | C WASHER | 8M0084613 | 69205 |
28 | SCREW, (#10-16 x .500) | 10-878608 | 10-812832 |
29 | SCREW, (.250-20 x .880) | 10-55715 | |
30 | SCREW, (.250-20 x 2.00) | 10-96529 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
- | POWERHEAD ASSEMBLY Comment: (135/150) | 878365T00 | 812815T00, 812815T97, 812815A97, 812815A96, 812815A92, 812815A90 (135/150) |
- | POWERHEAD ASSEMBLY Comment: (XR6/Magnum III) | 823434T97 | 823434A97, 823434A96, 823434A93 (XR6/Magnum III) |
- | POWERHEAD ASSEMBLY Comment: (175) | 812817T97 | 812817A97, 812817A96, 812817A92, 821861A92 (175) |
- | POWERHEAD ASSEMBLY Comment: (200) | 813043T97 | 813043A97, 813043A96, 813043A94, 812827A92, 813043A92 (200) |
Starter Motor
Back to TopBelow is the parts list for Mercury 105 JET Starter Motor:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | STARTER MOTOR ASSEMBLY | 50-893893 | 50-79472T 2, 50-79472 2 |
1 | DRIVE KIT | 90645 | |
2 | PINION ASSEMBLY, Drive | 13310T1 | |
3 | PLATE | 75660 | |
4 | THRU BOLT | 10-749681 | |
5 | NOT SOLD SEPARATE, Washer (American Bosch #WA3122) | NSS | |
6 | ARMATURE | 79216 | |
7 | BRUSH/SPRING KIT | 898265016 | 75384, 75384 1 |
8 | HOLDER | 898265014 | 61787 |
9 | NOT SOLD SEPARATE, Screw (American Bosch #02441-22-SC-30SM) | NSS | |
10 | END CAP | 15386001 |
Swivel Bracket And Steering Arm
Back to TopBelow is the parts list for Mercury 105 JET Swivel Bracket And Steering Arm:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | SWIVEL BRACKET ASSEMBLY Comment: (Black) | 1499-8M0102865 | 1499-8710T20 (Black) |
1 | SWIVEL BRACKET ASSEMBLY Comment: (Gray) | 1499-8710T21 | |
2 | SEAL, Oil, Lower | 26-87735 | |
3 | BUSHING | 23-818764 | 23-67669 |
4 | SPACER | 23-816039 | |
5 | O-RING | 25-8M0214926 | |
6 | FITTING, Grease | 22-8M0169589 | |
7 | BUSHING | 23-821207 | 23-99608 |
8 | THRUST WASHER | 12-816432 | |
9 | SCREW, (.437-20 x 7.50) | 10-8M0176309 | |
10 | MOUNT Comment: (135/150/175Long) (Jet) | 78687T | |
10 | MOUNT Comment: (All Other Models) | 77326 | |
11 | WASHER | 12-66921 | |
12 | WASHER | 12-78688 | |
13 | NUT, (.437-20) Stainless Steel | 11-8M0204653 | |
14 | LINK ASSEMBLY, Steering | 92876A12 | |
15 | SCREW, (.375-24 x 1.25) | 10-849838 | 10-14000 |
16 | NUT, (.375-24) | 11-8M0204726 | |
17 | WASHER, (.390 x .625 x .062) Stainless Steel | 12-37828 | |
18 | SWIVEL PIN ASSEMBLY, Steering Arm Comment: (Black) | 17-67706A55 | |
18 | SWIVEL PIN ASSEMBLY, Steering Arm Comment: (Gray) | 17-67706A55 | |
19 | YOKE ASSEMBLY, Bottom Comment: (Black) | 86580A1 | |
19 | YOKE ASSEMBLY, Bottom Comment: (Gray) | 86580A1 | |
20 | RING, Retaining | 53-67684 | |
21 | BUMPER | 8M0000516 | 88882 1 |
22 | SCREW, (.250-28 x .500) | 10-64014 | |
23 | SENDER ASSEMBLY, Trim | 8M0074846 | 821180A 6 |
24 | SCREW, (#10-24 x .750) | 10-852368 | 10-56682 |
25 | LOCKWASHER, Stainless Steel | 10,13-26996 | |
26 | WASHER, (.203 x .406 x .040) | 12-89302 |
Throttle Lever And Shift Shaft
Back to TopBelow is the parts list for Mercury 105 JET Throttle Lever And Shift Shaft:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
32 | BRACKET ASSEMBLY | 814283A2 | |
33 | LATCH | 98889 | |
34 | DRIVE SCREW | 10-42975 | |
35 | CUP | 39519 | |
36 | WEAR PLATE | 52100 | |
37 | LATCH | 8M0036768 | 38279 |
38 | WASHER, (.2656 x .625 x .0625) Stainless Steel | 12-35462 | |
39 | NUT, (.250-28) | 11-826709109 | 11-33825, 11-35045 |
40 | SCREW, (.312-18 x .880) | 10-53167T | |
41 | GUIDE BLOCK | 814284 | |
42 | SPRING | 24-20099 | |
43 | LINK ROD ASSEMBLY | 67073A1 | |
44 | SHIFT SHAFT ASSEMBLY Comment: (Long) (Use With Reference #46; With Tab; See Bubble A) | 79932A16 | |
44 | SHIFT SHAFT ASSEMBLY Comment: (X-Long) Use With Reference #46;With Tab; SSee Bubble A) | 79932A17 | |
45 | NOT SOLD SEPARATE, Shift Lever (Upper) Comment: (Use With Refference #46; With Tab; See Bubble A) | NSS | |
46 | BUSHING Comment: (Use With Refference #46; With Tab; See Bubble A) | 23-26600 | |
44 | SHIFT SHAFT ASSEMBLY Comment: (Long) (Use With Refference #46 Without Tab; See Bubble B) | 79932A16 | |
44 | SHIFT SHAFT ASSEMBLY Comment: (X-Long) Use With Refference #46;Without Tab;See Bubble B) | 79932A17 | |
45 | NOT SOLD SEPARATE, Shift Shaft Lever (Upper) Comment: (Use With Refference #46;Without Tab;See Bubble B) | NSS | |
46 | BUSHING Comment: (Use With Refference #46;Without Tab;See Bubble B) | 23-26856 | |
47 | WAVE WASHER | 13-29720 | |
48 | WASHER, (.2656 x .625 x .0625) Stainless Steel | 12-35462 | |
49 | NUT, (.250-28) | 11-826709109 | 11-33825, 11-35045 |
50 | IDLE STABILIZING SHIFT KIT Comment: (XR6/175 Magnum III) | 87-814281A1 | |
51 | SCREW, (#6-32 x .875) Comment: (XR6/175 Magnum III) | 10-77478 | |
52 | WASHER Comment: (XR6/175 Magnum III) | 12-27882 | |
53 | RESISTOR MODULE Comment: (XR6/175 Magnum III) | 17461A3 | |
1 | LEVER ASSEMBLY | 41094A3 | |
2 | SCREW, (.250-20 x 2.125) | 10-64022 | |
3 | NUT, (.250-20) | 11-64015 | |
4 | CAP, Nylon | 26852 | |
5 | SCREW, (.190-32 x 1.250) | 10-13627 | |
6 | NUT, Stainless Steel | 10-32,11-68219 | |
7 | CAP | 48039 | |
8 | WASHER, (.390 x 1.50 x .120) | 12-46765 | |
9 | NUT, | 10-32,11-46438 | |
10 | ROD | 76035 | |
11 | NUT, Brass | 10-32,11-45076 | |
12 | BALL JOINT ASSEMBLY | 62459T | |
13 | PIVOT | 74897T | |
14 | SPRING | 24-823235 | |
15 | BUSHING | 23-55171 | |
16 | LEVER | 410952 | |
17 | SCREW, (.375-16 x 1.75) | 10-818165 | 10-55337 |
18 | BUSHING | 23-55164 | |
19 | SCREW, (.250-20 x 2.125) | 10-64022 | |
20 | NUT, (.250-20) | 11-64015 | |
21 | CAP, Nylon | 26852 | |
22 | LATCH | 39483 | |
23 | SCREW, (.250-28 x .880) | 10-69026 | |
24 | SPRING | 24-20099 | |
25 | NUT, (.250-28) | 11-826709109 | 11-33825, 11-35045 |
26 | BARREL | 14638 | |
27 | ROD | 8302391 | |
28 | BUSHING | 23-8M0215006 | |
29 | CAM, Throttle Comment: (135) | 8282761 | |
29 | CAM Comment: (150 Thru 200) | 828276 | |
30 | STUD, (.250-28 x 1.750) | 16-20353 | |
31 | NUT, (.250-28) | 11-826709109 | 11-33825, 11-35045 |
Tools, Special
Back to TopBelow is the parts list for Mercury 105 JET Tools, Special:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
- | GAUGE TOOL, Carburetor Comment: (Carbruetor) | 91-36392 | |
- | ISOLATOR KIT, Battery Comment: (Electrical/Ignition) | 84-8M0094239 | 84-815366A 5 (Electrical/Ignition) |
- | DIAL INDICATOR TOOL Comment: (Electrical/Ignition) | 91-58222A1 | |
- | ADAPTOR Comment: (Electrical/Ignition) | 91-890451 | |
- | HOLDER TOOL Comment: (Electrical/Ignition) | 91-52344 | |
- | PULLER KIT, Flywheel Comment: (Electrical/Ignition) | 91-849154T1 | |
- | MULTI METER Comment: (Electrical/Ignition) | 91-99750A1 | |
- | CAP TOOL, Flywheel Puller Comment: (Electrical/Ignition) | 91-24161 | |
- | SWITCH ASSEMBLY Comment: (Electrical/Ignition) | 91-52024A1 | |
- | SERVICE TACHOMETER Comment: (Electrical/Ignition) | 91-59339 | |
- | SPARK TESTER, Eight Chamber Comment: (Electrical/Ignition) | 91-850439T1 | |
- | GAP TOOL, Single Chamber, Single Chamber Comment: (Electrical/Ignition) | 91-63998A1 | |
- | SPARK TESTER Comment: (Electrical/Ignition) | 91-850439T1 | |
- | HARNESS ASSEMBLY, Test Comment: (Electrical/Ignition) | 91-14443A1 | |
- | TIMING LIGHT Comment: (Electrical/Ignition) | 91-99379 | |
- | GAUGE TOOL Comment: (Powerhead) | 91-29287 | |
- | SLEEVE Comment: (Powerhead) | 91-55919 | |
- | HOLDER TOOL Comment: (Powerhead) | 91-52344 | |
- | PULLER KIT, Flywheel Comment: (Powerhead) | 91-849154T1 | |
- | LIFTING EYE Comment: (Powerhead) | 91-904551 | |
- | INSTALLER KIT Comment: (Powerhead) | 91-77109A3 | |
- | REMOVAL TOOL, Piston Pin Lock Ring Comment: (Powerhead) | 91-52952T1 | |
- | INSTALLER KIT, Piston Pin Comment: (Powerhead) | 91-74607A3 | |
- | COMPRESSOR TOOL, Ring (2.0L) Comment: (Powerhead) | 91-65494T | |
- | COMPRESSOR TOOL, Piston Ring Comment: (Powerhead) | 91-818773T | 91-818773 (Powerhead) |
- | EXPANDER TOOL, Piston Ring Comment: (Powerhead) | 91-24697 | |
- | STAND TOOL, Powerhead Comment: (Powerhead) | 91-30591T1 | |
- | CAP TOOL, Flywheel Puller Comment: (Powerhead) | 91-24161 | |
- | TORQUE WRENCH, (0-150 lb-in) Comment: (Powerhead) | 91-66274 | |
- | PULLER PLATE Comment: (Powerhead) | 91-37241 | |
- | ALIGNMENT TOOL Comment: (Trim/Tilt System) | 91-112301 | |
- | MULTI METER Comment: (Trim/Tilt System) | 91-99750A1 | |
- | TEST GAUGE KIT Comment: (Trim/Tilt System) | 91-52915A6 | |
- | SPANNER WRENCH Comment: (Trim/Tilt System) | 91-74951 | |
- | HEAT LAMP Comment: (Trim/Tilt System) | 91-63209 | |
- | REMOVER TOOL, Trim Rod Guide Comment: (Trim/Tilt System) | 91-44487T1 | |
- | REMOVAL TOOL, Trim Rod Comment: (Trim/Tilt System) | 91-44486A1 | |
- | INDICATOR TOOL, Backlash Comment: (Gear Housing) | 91-8M0053505 | 91-78473 (Gear Housing) |
- | INDICATOR TOOL, Backlash Comment: (Gear Housing) | 91-196601 | |
- | MANDREL, Bearing Driver Cup Comment: (Gear Housing) | 91-31106T | |
- | DRIVER TOOL, Bearing Cup Comment: (Gear Housing) | 91-87120T | |
- | PRE LOAD TOOL, Bearing Comment: (Gear Housing) | 91-14311A04 | |
- | INSTALLATION TOOL, Bearing Comment: (Gear Housing) | 91-18601 | |
- | PULLER KIT, Bearing Comment: (Gear Housing) | 91-31229A7 | |
- | MANDREL Comment: (Gear Housing) | 91-15755T | |
- | DRIVE HEAD TOOL Comment: (Gear Housing) | 91-36569T | |
- | DRIVER ROD TOOL, Needle Bearings Comment: (Gear Housing) | 91-37323 | |
- | PILOT WASHER Comment: (Gear Housing) | 91-36571T | |
- | INSTALLATION TOOL, Bearing Comment: (Gear Housing) | 91-38628T | |
- | NUT, (.625-18) Comment: (Gear Housing) | 11-24156 | |
- | PLATE Comment: (Gear Housing) | 91-29310 | |
- | WASHER Comment: (Gear Housing) | 12-34961 | |
- | WRENCH, Bearing Retainer Comment: (Gear Housing) | 91-43506T | |
- | INSTALL TOOL, Cross Pin Comment: (Gear Housing) | 91-86642 | |
- | TOOL, Cover Nut Comment: (Gear Housing) | 91-73688 | |
- | DIAL INDICATOR TOOL Comment: (Gear Housing) | 91-58222A1 | |
- | HOLDING TOOL, Dial Indicator Comment: (Gear Housing) | 91-89897 | |
- | FOWARD GEAR INSTALLATION TOOL Comment: (Gear Housing) | 91-815850 | |
- | INSTALLER TOOL, Needle Bearing Comment: (Gear Housing) | 91-86943T | |
- | WRENCH, Bearing Carrier Retainer Comment: (Gear Housing) | 91-61069T | |
- | GUIDE PLATE Comment: (Gear Housing) | 91-816243 | |
- | PULLER JAWS Comment: (Gear Housing) | 91-816242 | |
- | WASHER Comment: (Gear Housing) | 12-37429 | |
- | MANDREL Comment: (Gear Housing) | 91-92788T | |
- | DRIVER TOOL, Oil Seal Comment: (Gear Housing) | 91-31108T | |
- | LOCATION TOOL, Pinion Comment: (Gear Housing) | 91-12349A05 | |
- | LOCATION TOOL, Pinion Gear Comment: (Gear Housing) | 91-74776T | |
- | PROPELLER SHAFT Comment: (Gear Housing) | 44-93003 | |
- | INSTALLER TOOL, Bearing Comment: (Gear Housing) | 91-816292 | |
- | PULLER TOOL Comment: (Gear Housing) | 91-85716 | |
- | PULLER JAW ASSEMBLY Comment: (Gear Housing) | 91-46086A1 | |
- | PULLER PLATE Comment: (Gear Housing) | 91-37241 | |
- | INSTALLATION TOOL, Bearing Adaptor Comment: (Gear Housing) | 91-18605A2 | |
- | PULLER ASSEMBLY, Slide Hammer Comment: (Gear Housing) | 91-34569A1 | |
- | REMOVAL/INSTALL TOOL, Shift Shaft Bushing | 91-31107T | |
- | TORQUE WRENCH, (0-150 lb-in) | 91-66274 |
Top Cowl
Back to TopBelow is the parts list for Mercury 105 JET Top Cowl:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | TOP COWL ASSEMBLY, Black | 4021-827328T7 | |
1 | TOP COWL ASSEMBLY, Silver | 4021-827328T8 | |
2 | INLET, Air Comment: (Black) | 821256T03 | 821256T 1 (Black) |
2 | INLET, Air Comment: (Silver) | 821256T2 | |
3 | SCREW, (M6 x 16) | 10-82130016 | |
4 | SOUND BLANKET KIT | 828344A1 | |
5 | NOT SOLD SEPARATE, Sound Blanket (Top) | NSS | |
6 | CAP PLUG | 19-823865 | |
7 | HANDLE Comment: (Black) | 831207A16 | 831207A14, 831207T 3, 831207T10 (Black) |
7 | HANDLE Comment: (Silver) | 831207A15 | 831207A 4 (Silver) |
8 | BUSHING | 23-812707 | 23-71984, 23-F286818, 23-F286828, F480818 |
9 | SPACER | 23-831214 | |
10 | WASHER, Wave | 13-12134 | |
11 | CAM, Latch Shaft | 8M0001081 | 889566, F481777, F48177 |
12 | WASHER | 12-8M0214930 | |
13 | LOCKWASHER, (.250) Stainless Steel | 13-26992 | |
14 | SCREW, (.250-20 x .620) Stainless Steel | 10-28635 | |
15 | BRACKET, Front | 8M0036792 | 821249M 2 |
16 | BUMPER, Latch | 815477 | |
17 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
18 | NUT, (M6) | 11-401196 | |
19 | RING, Retaining | 53-8237951 | |
20 | ROLLER | 8M0207770 | |
21 | PIN, Roll | 8155381 | |
22 | WASHER, (.281 x .500 x .060) Stainless Steel | 12-8M0204649 | |
23 | NUT, (M6) | 11-401196 | |
24 | ROPE AND HANDLE KIT, Manual Starting | 47341A11 |
Transom Brackets(S/N-0G589999 & Below)
Back to TopBelow is the parts list for Mercury 105 JET Transom Brackets(S/N-0G589999 & Below):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | BRACKET, Transom Comment: (Starboard, Black) | 3401-8718F7 | |
2 | BRACKET ASSEMBLY, Transom Comment: (Port, Black) | 3400-8716A8 | |
1 | BRACKET, Transom Comment: (Starboard, Gray) | 3401-8718F8 | |
2 | BRACKET ASSEMBLY, Transom Comment: (Port, Gray) | 3400-8716A9 | |
3 | FITTING, Grease, Port | 22-8M0169588 | |
4 | NUT, (.875-14), Bottom | 11-47525 | |
5 | TILT TUBE | 826125A1 | |
6 | NUT, (1.00-14) Brass/Nickel Plate | 11-826135 | |
7 | O-RING, (.612 x .103) | 25-45711 | |
8 | WASHER | 13-88750 | |
9 | NUT, (.875-14) | 11-826164 | |
10 | SCREW, (.500-20 x 4.500) | 10-8M0149747 | |
11 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel | 12-8M0204648 | |
12 | NUT, (.500-20) | 11-91962 | |
13 | LEVER ASSEMBLY | 8M0115104 | 8M0115103, 99629T 2 |
14 | WAVE WASHER | 13-99611 | |
15 | NYLINER | 23-65830 | |
16 | KNOB | 99633 | |
17 | PIN, Groove | 17-99615 | |
18 | SPRING | 24-99622 | |
19 | PIN, Groove | 17-99604 | |
20 | BOLT ASSEMBLY | 10-96930A1 | |
21 | NUT, (.375-24) | 11-23161 | |
22 | STOP | 814207 | |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
Transom Brackets(S/N-0G590000 & Up)
Back to TopBelow is the parts list for Mercury 105 JET Transom Brackets(S/N-0G590000 & Up):

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | BRACKET ASSEMBLY, Transom-Starboard | 3426-828334T03 | |
2 | BRACKET ASSEMBLY, Transom-Port | 3425-828333T08 | |
3 | FITTING, Grease, Port | 22-8M0169588 | |
4 | TILT TUBE | 826125A1 | |
5 | NUT, (1.00-14) Brass/Nickel Plate | 11-826135 | |
6 | O-RING, (.612 x .103) | 25-45711 | |
7 | WASHER | 13-88750 | |
8 | NUT, (.875-14) | 11-826164 | |
9 | SCREW, (.500-20 x 4.500) | 10-8M0149747 | |
10 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel | 12-8M0204648 | |
11 | NUT, (.500-20) | 11-91962 | |
12 | LEVER ASSEMBLY | 8M0115104 | 8M0115103, 99629T 2 |
13 | SPRING, Tension | 24-830899 | |
14 | NYLINER | 23-65830 | |
15 | SPRING, Compression | 24-830900 | |
16 | KNOB | 99633 | |
17 | PIN, Groove | 17-99615 | |
18 | PIN | 17-893709 | 17-99617 |
- | GASKET SET, Engine | 27-815791A92 | 27-815791A90, 27-815809A90, 27-815810A90 |
Wiring Harness/Starter Solenoid
Back to TopBelow is the parts list for Mercury 105 JET Wiring Harness/Starter Solenoid:

Position No. | Part Name | OEM Number | Supersedes |
---|---|---|---|
1 | HARNESS ASSEMBLY, Engine Wiring | 84-826730A4 | |
2 | FUSE, 20 Ampere | 88-8M0207796 | |
3 | TIE STRAP, (8.00 Inches) | 54-816311T | 54-816311, 54-90077, 54-826785, F1877, F717046-1, F717046, MAF03001, 833188E, 54-F9301, 54-816311100, 54-898101111, 54-898101275 |
4 | TERMINAL BLOCK | 86-194372 | |
5 | SCREW, (.190-32 x .620) | 10-38055 | |
6 | WASHER, (.203 x .406 x .040) | 12-89302 | |
7 | NUT, Brass | 10-32,11-45076 | |
8 | CLAMP | 54-814634 | |
9 | IGNITION PLATE | 434292 | |
10 | SWITCHBOX ASSEMBLY | 332-7778A12 | |
11 | SCREW, (#12-24 x 2.00) | 10-13669 | |
12 | BUSHING | 23-94453 | |
13 | CABLE ASSEMBLY | 84-62310A2 | |
14 | NUT, Brass | 10-32,11-45076 | |
15 | CABLE ASSEMBLY (3 Inch, White/Black) | 84-91865A1 | |
15 | CABLE ASSEMBLY (6 Inch, Red/White) | 84-88528A2 | |
16 | WIRE ASSEMBLY | 84-60871A10 | |
17 | SCREW, (#10-16 x .380) | 10-878607 | 10-817626 |
18 | CABLE ASSEMBLY, Black, Black | 84-65999A3 | |
19 | SCREW, (#10-32 x .500) | 10-87926 | |
20 | SCREW, (.312-18 x 1.250) | 10-60411 | |
21 | LOCKWASHER, (.312) | 13-8M0204647 | |
22 | WASHER | 12-36042 | |
23 | WASHER, (Rubber), Rubber | 12-67264 | |
24 | BUSHING | 23-67268 | |
25 | CABLE ASSEMBLY, Positive - Battery | 84-88439A34 | |
25 | CABLE ASSEMBLY, Negative - Battery | 84-88439A24 | |
26 | SCREW, (.250-20 x 1.12) | 10-455611 | |
27 | LOCKWASHER, (.250) Stainless Steel | 13-26992 | |
28 | CABLE ASSEMBLY, Black, Black | 84-65999A2 | |
29 | INSULATOR | 85-78866 | |
30 | NUT, Brass | 10-32,11-45076 | |
31 | SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) | 89-817109A2 | |
32 | BUSHING | 23-8M0214955 | |
33 | NUT, Brass | 10-32,11-45076 | |
34 | LOCKWASHER, (.312) | 13-53166 | |
35 | NUT, (.312-18) | 11-8M0204668 |
Download this page as PDF: Click here
For Mercury Owners:
To assist you in maintaining and repairing your marine engines, we hope the following resources may be of use:
-
Mercury / Mercruiser / Mariner Parts from JLM Marine
- Mercury Thermostat
- Mercury Water Pump
- Mercury Water Pump Impeller
- Mercury Water Pump Impeller Kit
- Mercury Carburetor
- Mercury Carburetor Repair Kit
- Mercury Fuel Pump
- Mercury Fuel Pump Kit
- Mercury Air Filter
- Mercury Oil Filter
- Mercury Oil Seal
- Mercury Fuel Filter
- Mercury Gasket
- Mercury Relay
- Mercury Ignition Switch
- Mercury Trim Tilt Switch
- Mercury Ignition Sensor
- Mercury Spark Plug Wire
- Mercury Water Distribution Housing
- Mercury Bellow
- Mercury Bellows Kit
- Mercury Serpentine Pulley
- Mercury Accessories
- Mercury Belt
- Mercury Oil Plug
- Mercury Drain Plug
- Mercury Bellows Replacement Tool
About JLM Marine
Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.
As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.
We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.
Leave a comment
Please note, comments need to be approved before they are published.