🔎 Mercury 225 (3.0L EFI) Reference Library — Exploded parts diagrams (71 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 225 (3.0L EFI) is a 4-Stroke, V6 64-degree, DOHC, 24-valve outboard motor. Designed for large center-consoles, offshore sport-fishing boats, and multi-engine configurations.
Quick Reference Specifications
| Specification |
Value |
| Engine Type |
4-Stroke, V6 64-degree, DOHC, 24-valve |
| Horsepower |
225 HP |
| Displacement |
3400 cc (3.4L / 209 CID) |
| Bore x Stroke |
92 mm x 86 mm (3.6 in. x 3.4 in.) |
| Spark Plug (Type & Gap) |
NGK LKAR7C-9 |
| Engine Oil Capacity |
6.6 L (7.0 qt) |
| Recommended Engine Oil |
Mercury FourStroke Oil 25W-40 |
| Gear Case Oil Capacity |
710 mL (24.0 oz) |
| Idle Speed (in gear) |
600 ± 50 RPM (in gear) |
| Full Throttle RPM Range |
5200-6000 |
| Fuel |
Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 225 (3.0L EFI):
-
Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
-
Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
-
Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
-
Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
-
Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 225 (3.0L EFI).
▶ACCESSORIES (1 parts)
| Ref |
OEM Part # |
Part Name |
| 0 |
17334A2 |
VISUAL WARNING SYSTEM (LOW OIL/OVERHEAT) |
▶ANCHOR BRACKET/THROTTLE LINKAGE (33 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
87-8M0052931 |
SWITCH Comment: (OIL INJECTION) |
| 2 |
10-82470620 |
SCREW, (M3.5 x 20) Comment: (OIL INJECTION) |
| 3 |
824010T05 |
BRACKET |
| 4 |
10-42975 |
DRIVE SCREW |
| 5 |
824016 |
LATCH |
| 6 |
824015 |
CUP, Barrel Retainer |
| 7 |
10-82155025 |
SCREW, (M8 x 25) Stainless Steel |
| 8 |
23-824013 |
BUSHING |
| 9 |
23-812707 |
BUSHING |
| 10 |
24-824014 |
SPRING |
| 11 |
8240111 |
GUIDE, Roller |
| 12 |
825204A2 |
LINK KIT, Throttle |
| 13 |
NSS |
NOT SOLD SEPARATE, Throttle Lever |
| 14 |
NSS |
NOT SOLD SEPARATE, Throttle Lever |
| 15 |
10-15124 |
SCREW, (#10-32 x .750) |
| 16 |
12-89302 |
WASHER, (.203 x .406 x .040) |
| 17 |
10,13-69432 |
LOCKWASHER, External |
| 18 |
828500 |
LINK, Throttle |
| 19 |
23-8M0215006 |
BUSHING |
| 20 |
42927 |
INSERT |
| 21 |
12-35459 |
WASHER |
| 22 |
11-401366 |
NUT, (M6) Stainless Steel |
| 23 |
10-40124 |
SCREW, (M6 x 55) |
| 24 |
11-400212 |
NUT, (M6) Stainless Steel |
| 25 |
42942 |
CAP |
| 26 |
8M0040987 |
LEVER, Throttle Control |
| 27 |
23-821113 |
BUSHING |
| 28 |
10-82155025 |
SCREW, (M8 x 25) Stainless Steel Comment: (OIL INJECTION) |
| 29 |
11-401388 |
NUT, (M8) Comment: (OIL INJECTION) |
| 30 |
826205 |
BRACKET, Oil Link Comment: (OIL INJECTION) |
| 31 |
10-81893435 |
SCREW, (M8 x 35) |
| 32 |
12-36042 |
WASHER |
| 33 |
878190 |
LINK Comment: (OIL INJECTION) |
▶Accessories (1 parts)
| Ref |
OEM Part # |
Part Name |
| 0 |
17334A2 |
VISUAL WARNING SYSTEM (LOW OIL/OVERHEAT) |
▶Anchor Bracket/Throttle Linkage (30 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
87-8M0052931 |
SWITCH |
| 2 |
10-82470620 |
SCREW, (M3.5 x 20) |
| 3 |
824010T05 |
BRACKET |
| 4 |
10-42975 |
DRIVE SCREW |
| 5 |
824016 |
LATCH |
| 6 |
824015 |
CUP, Barrel Retainer |
| 7 |
10-82155025 |
SCREW, (M8 x 25) Stainless Steel |
| 8 |
23-824013 |
BUSHING |
| 9 |
23-812707 |
BUSHING |
| 10 |
24-824014 |
SPRING |
| 11 |
8240111 |
GUIDE, Roller |
| 12 |
8142392 |
CAM |
| 13 |
23-26856 |
BUSHING |
| 14 |
11-401386 |
NUT, (M6) |
| 15 |
825377 |
LINK, Throttle |
| 16 |
23-8M0215006 |
BUSHING |
| 17 |
826205 |
BRACKET, Oil Link |
| 18 |
878190 |
LINK |
| 19 |
10-82155025 |
SCREW, (M8 x 25) Stainless Steel |
| 20 |
11-401388 |
NUT, (M8) |
| 21 |
8M0040987 |
LEVER, Throttle Control |
| 22 |
10-81893435 |
SCREW, (M8 x 35) |
| 23 |
12-36042 |
WASHER |
| 24 |
42927 |
INSERT |
| 25 |
23-821113 |
BUSHING |
| 26 |
11-401366 |
NUT, (M6) Stainless Steel |
| 27 |
10-40124 |
SCREW, (M6 x 55) |
| 28 |
11-400212 |
NUT, (M6) Stainless Steel |
| 29 |
42942 |
CAP |
| 30 |
12-35459 |
WASHER |
▶BLEED SYSTEM(PORT) (12 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809793A00 |
POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (6 IN.) |
| 2 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (3 IN.) |
| 3 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (13-1/4 IN.) |
| 4 |
21-149126 |
CHECK VALVE |
| 5 |
21-8282182 |
CHECK VALVE |
| 6 |
22-8243561 |
FITTING |
| 7 |
22-8245021 |
CONNECTOR |
| 8 |
21-8348041 |
CHECK VALVE |
| 9 |
21-8159234 |
CHECK VALVE |
| 10 |
54-22875 |
CLIP |
| 11 |
10-48408 |
SCREW, (#10-16 x .500) |
▶BLEED SYSTEM(STARBOARD) (15 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809793A00 |
POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (9-1/2 IN.) |
| 2 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (6 IN.) |
| 3 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (3 IN.) |
| 4 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (3-3/4 IN.) |
| 5 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (22-1/2 IN.) |
| 6 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (13-1/4 IN.) |
| 7 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (16 IN.) |
| 8 |
21-149126 |
CHECK VALVE |
| 9 |
22-8243561 |
FITTING |
| 10 |
22-8245021 |
CONNECTOR |
| 11 |
21-8282182 |
CHECK VALVE |
| 12 |
21-8348041 |
CHECK VALVE |
| 13 |
21-426585 |
CHECK VALVE |
| 14 |
21-8159234 |
CHECK VALVE |
▶BOTTOM COWL (22 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
4009-818448A1 |
BOTTOM COWL Comment: (BLACK-PORT) |
| 2 |
4009-818447A1 |
BOTTOM COWL Comment: (BLACK-STBD.) |
| 3 |
8M0109217 |
SEAL, Cowl (41.00 Inches) |
| 4 |
10-82130040 |
SCREW, (M6 x 40) |
| 5 |
10-824868 |
SCREW, (M6 x 75) |
| 6 |
889740A02 |
FRONT HANDLE, Black |
| 7 |
23-335891 |
BUSHING |
| 8 |
25-48462 |
O-RING, (.614 x .070) |
| 9 |
8219423 |
PAWL |
| 10 |
12-69057 |
WASHER, (.281 x .734 x .063) |
| 11 |
11-401366 |
NUT, (M6) Stainless Steel |
| 12 |
10-8214281 |
SCREW, (#10-16 x .625) |
| 13 |
54-822873 |
CLIP |
| 14 |
812830T01 |
PLUG Comment: (SEAPRO/MARATHON) |
| 15 |
8M0032848 |
RETAINER Comment: (SEAPRO/MARATHON) |
| 16 |
87-8M0042301 |
SWITCH ASSEMBLY Comment: (NON-SEAPRO/MARATHON) |
| 17 |
859435T |
INSERT (LOWER) Comment: SN# 0G960500 & Up |
| 18 |
859434T |
INSERT (UPPER) Comment: SN# 0G960500 & Up |
| 19 |
859343 |
FOAM Comment: SN# 0G960500 & Up |
| 20 |
54-822024 |
CLAMP Comment: SN# 0G960499 & Below |
| 21 |
54-822023 |
CLAMP Comment: SN# 0G960499 & Below |
| 22 |
10-92799 |
SCREW, (#10-16 x 1.12) |
▶Bleed System (Port) (13 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (6 IN.) |
| 2 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (3 IN.) |
| 3 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (13-1/4 IN.) |
| 4 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (16 IN.) |
| 5 |
21-149126 |
CHECK VALVE |
| 6 |
22-8243561 |
FITTING |
| 7 |
22-8245021 |
CONNECTOR |
| 8 |
21-8282182 |
CHECK VALVE |
| 9 |
21-8348041 |
CHECK VALVE |
| 10 |
21-8159234 |
CHECK VALVE |
| 11 |
54-22875 |
CLIP |
| 12 |
10-48408 |
SCREW, (#10-16 x .500) |
▶Bleed System (Starboard) (15 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (8-1/2 IN.) |
| 2 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (6 IN.) |
| 3 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (3 IN.) |
| 4 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (22-1/2 IN.) |
| 5 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (13-1/4 IN.) |
| 6 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (3-3/4 IN.) |
| 7 |
32-892024122 |
TUBING, (20.00 Feet Bulk) (9-1/2 IN.) |
| 8 |
21-149126 |
CHECK VALVE |
| 9 |
22-8243561 |
FITTING |
| 10 |
22-8245021 |
CONNECTOR |
| 11 |
21-426585 |
CHECK VALVE |
| 12 |
21-8159234 |
CHECK VALVE |
| 13 |
21-8348041 |
CHECK VALVE |
| 14 |
21-8282182 |
CHECK VALVE |
▶Bottom Cowl (20 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
4009-818448A1 |
BOTTOM COWL Comment: (PORT) |
| 2 |
4009-818447A1 |
BOTTOM COWL Comment: (STBD.) |
| 3 |
8M0109217 |
SEAL, Cowl (41.00 Inches) |
| 4 |
10-82130040 |
SCREW, (M6 x 40) |
| 5 |
10-824868 |
SCREW, (M6 x 75) |
| 6 |
889740A02 |
FRONT HANDLE, Black |
| 7 |
23-335891 |
BUSHING |
| 8 |
25-48462 |
O-RING, (.614 x .070) |
| 9 |
8219423 |
PAWL |
| 10 |
12-69057 |
WASHER, (.281 x .734 x .063) |
| 11 |
11-401366 |
NUT, (M6) Stainless Steel |
| 12 |
10-8214281 |
SCREW, (#10-16 x .625) |
| 13 |
54-822873 |
CLIP |
| 14 |
87-8M0042301 |
SWITCH ASSEMBLY |
| 15 |
859435T |
INSERT (LOWER) Comment: SN# 0G960500 & Up |
| 16 |
859434T |
INSERT (UPPER) Comment: SN# 0G960500 & Up |
| 17 |
859343 |
FOAM Comment: SN# 0G960500 & Up |
| 18 |
54-822024 |
CLAMP (LOWER) Comment: SN# 0G960499 & Below |
| 19 |
54-822023 |
CLAMP (UPPER) Comment: SN# 0G960499 & Below |
| 20 |
10-92799 |
SCREW, (#10-16 x 1.12) |
▶CARBURETOR (27 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-814195A93 |
GASKET SET |
| 1 |
3326-828272T78 |
CARBURETOR, Bottom Comment: (SEAPRO/MARATHON - WMV-19) SN# 0G960500 & Up |
| 2 |
1395-809743 |
COVER |
| 3 |
1395-809758 |
GASKET |
| 4 |
1395-8087391 |
SCREW |
| 5 |
27-828292 |
GASKET |
| 6 |
815633052 |
JET, (.052) Comment: (BOTTOM)(RIGHT BORE-WMV-19) SN# 0G960500 & Up |
| 7 |
1395-5815 |
JET, (.086) Comment: (WMV-19) |
| 8 |
810742 |
JET, (.044) Comment: (CENTER)(LEFT BORE-WMV-19) SN# 0G960500 & Up |
| 9 |
810779 |
CAP |
| 10 |
NSS |
NOT SOLD SEPARATE, Idle Mixture Screw/Spring |
| 11 |
1395-8113523 |
LEVER KIT |
| 12 |
1395-6031 |
SPACER |
| 13 |
NSS |
NOT SOLD SEPARATE, Spring |
| 14 |
NSS |
NOT SOLD SEPARATE, Gasket-Fuel Bowl |
| 15 |
810738 |
FLOAT ASSEMBLY |
| 16 |
F10064 |
SHAFT |
| 17 |
1395-5902 |
SCREW, (#6-32 x .187) |
| 18 |
1395-8116901 |
VALVE SEAT KIT |
| 19 |
NSS |
NOT SOLD SEPARATE, Gasket-Valve Seat |
| 20 |
1395-8236241 |
BOWL, Fuel Comment: (CENTER/BOTTOM) |
| 21 |
1395-808612 |
SCREW AND WASHER, (#8-32 x .750) |
| 22 |
1395-811694 |
PLUG KIT |
| 23 |
1395-802731 |
SEAL (CONSISTS OF 4 GASKETS) |
| 24 |
1395-6201 |
JET, (.080) Comment: (PORT)(WMV19) SN# 0G960500 & Up |
| 25 |
1395-7900 |
TEE FITTING Comment: (TOP/CENTER) |
| 26 |
1395-7901 |
ELBOW Comment: (BOTTOM) |
▶CRANKSHAFT, PISTONS - AND CONNECTING RODS (27 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809793A00 |
POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 |
482-9784A11 |
CRANKSHAFT ASSEMBLY Comment: SN# 0T325117 & Up |
| 2 |
NSS |
NOT SOLD SEPARATE, Wear Sleeve |
| 3 |
30-67923T |
BEARING, Ball (LOWER) |
| 4 |
53-67446 |
RING |
| 5 |
43-19301 |
GEAR Comment: (OIL INJECTION) |
| 6 |
28-91800 |
KEY, Woodruff Comment: (OIL INJECTION) |
| 7 |
39-843198T01 |
RING |
| 8 |
28-91800 |
KEY, Woodruff |
| 9 |
25-35126 |
O-RING, (.859 x .139) |
| 10 |
31-88270A02 |
RACE ASSEMBLY Comment: SN# 0T325117 & Up |
| 11 |
NSS |
NOT SOLD SEPARATE, Needle Bearing Comment: SN# 0T325117 & Up |
| 12 |
700-878573A2 |
PISTON ASSEMBLY Comment: (PORT-.030 O/S) |
| 13 |
53-8320811 |
LOCK RING |
| 14 |
39-875257A12 |
RING SET, Piston, With 6 Each Top and Bottom Rings Comment: (.030 O/S) SN# 0G960500 & Up |
| 15 |
NSS |
NOT SOLD SEPARATE, Piston Ring (SECOND) Comment: SN# 0G960500 & Up |
| 16 |
600-8M0125869 |
CONNECTING ROD ASSEMBLY |
| 17 |
10-94320 |
SCREW, (.375-24 x 1.250) |
| 18 |
31-844338A01 |
BEARING/CAGE KIT |
| 19 |
NSS |
NOT SOLD SEPARATE, Bearing |
| 20 |
12-88263 |
THRUST WASHER |
| 21 |
29-8M0204715 |
NEEDLE, Roller Bearing |
| 22 |
31-816773A2 |
BEARING ASSEMBLY (UPPER) |
| 23 |
26-859093 |
SEAL |
| 24 |
25-823683 |
O-RING, (1.989 x .070) |
| 25 |
12-33001 |
WASHER, (.641 x 1.250 x .190) |
| 26 |
11-42979 |
NUT, (M16) |
▶CYLINDER BLOCK AND END CAP (55 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809794A97 |
POWERHEAD ASSEMBLY |
| 1 |
885-9811A19 |
CYLINDER BLOCK |
| 2 |
16-903509 |
STUD, (M10 x 1.5 x 64) |
| 3 |
16-8154431 |
STUD, (M10 x 1.5 x 155) |
| 4 |
22-328022 |
PLUG, Pipe (.125-27) Brass |
| 5 |
22-36382 |
FITTING, (.250-18 x .62) Brass Comment: (NON OIL INJECTION) |
| 6 |
8248577 |
DEFLECTOR, Water |
| 7 |
21-8781051 |
CHECK VALVE Comment: (OIL INJECTION) |
| 8 |
8215832 |
PIN |
| 9 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 10 |
10-81893435 |
SCREW, (M8 x 35) |
| 11 |
10-82446180 |
SCREW, (M10 x 80) |
| 12 |
17-8M0036405 |
PIN |
| 13 |
19-850309001 |
PLUG |
| 14 |
NSS |
NOT SOLD SEPARATE, Plug-Serial Number |
| 15 |
8217621 |
TIMING POINTER |
| 16 |
10-82130012 |
SCREW, (M6 x 12) |
| 17 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 18 |
32-826544A1 |
TUBING KIT |
| 19 |
22-687271 |
FITTING, (.250-18) 90 Degree - Brass |
| 20 |
12-8M0214963 |
WASHER, (.406 x .750 x .105) Stainless Steel |
| 21 |
11-4013610 |
NUT, (M10) Stainless Steel |
| 22 |
8256751 |
BRACKET |
| 23 |
10-82130012 |
SCREW, (M6 x 12) |
| 24 |
8211051 |
BRACKET, Alternator |
| 25 |
10-81893450 |
SCREW, (M8 x 50) |
| 26 |
8212251 |
BRACKET |
| 27 |
10-82130012 |
SCREW, (M6 x 12) |
| 28 |
822486 |
BRACKET, Guide |
| 29 |
821909 |
SENSOR |
| 30 |
10-82104510 |
SCREW, (M5 x 10) |
| 31 |
818574 |
SEAL |
| 32 |
878453 |
SEAL Comment: SN# 0T178500 & Up |
| 33 |
812851A2 |
CYLINDER HEAD Comment: (NON SEAPRO/MARATHON) |
| 34 |
833072003 |
THERMOSTAT, 62° Celsius (143° Fahrenheit) |
| 35 |
27-8M0204714 |
GASKET |
| 36 |
19801A1 |
THERMOSTAT COVER |
| 37 |
22-8167811 |
ELBOW |
| 38 |
32-77653101 |
HOSE, (48.00 Inches Bulk) (20-1/2 IN.) Comment: (STARBOARD) |
| 39 |
82244609 |
SCREW (M8 x 90) |
| 40 |
10-8M0045380 |
SCREW, (M8 x 50) |
| 41 |
13536A14 |
SENSOR ASSEMBLY, Temperature |
| 42 |
137151 |
RETAINER |
| 43 |
10-81893414 |
SCREW, (M8 x 14) |
| 44 |
1171-9787A4 |
END CAP ASSEMBLY |
| 45 |
25-62700 |
O-RING, (3.237 x .103) |
| 46 |
26-8308981 |
SEAL |
| 47 |
10-82130020 |
SCREW, (M6 x 20) |
| 48 |
434531 |
PLUG Comment: (NON OIL INJECTION) |
| 49 |
25-8M0204667 |
O-RING Comment: (NON OIL INJECTION) |
| 50 |
10-82104520 |
SCREW, (M5 x 20) (M5 x 20) Comment: (NON OIL INJECTION) |
| 51 |
8261211 |
BRACKET |
| 52 |
10-48408 |
SCREW, (#10-16 x .500) |
| 53 |
10-82130012 |
SCREW, (M6 x 12) |
| 54 |
8266241 |
CLAMP |
▶Crankshaft, Pistons and Connecting Rods (26 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
482-9784A11 |
CRANKSHAFT ASSEMBLY Comment: SN# 0T325117 & Up |
| 2 |
NSS |
NOT SOLD SEPARATE, Wear Sleeve |
| 3 |
30-67923T |
BEARING, Ball (LOWER) |
| 4 |
53-67446 |
RING |
| 5 |
43-19301 |
GEAR |
| 6 |
39-843198T01 |
RING |
| 7 |
28-91800 |
KEY, Woodruff |
| 8 |
25-35126 |
O-RING, (.859 x .139) |
| 9 |
817001A1 |
RACE ASSEMBLY, Bearing Comment: SN# 0T325116 & Below |
| 10 |
NSS |
NOT SOLD SEPARATE, Roller Comment: SN# 0T325116 & Below |
| 11 |
700-878573A2 |
PISTON ASSEMBLY Comment: (PORT -.030 O/S) |
| 12 |
53-8320811 |
LOCK RING |
| 13 |
39-875257A12 |
RING SET, Piston, With 6 Each Top and Bottom Rings Comment: (.030 Oversize) SN# 0G960500 & Up |
| 14 |
NSS |
NOT SOLD SEPARATE, Piston Ring (SECOND) |
| 15 |
600-8M0125869 |
CONNECTING ROD ASSEMBLY |
| 16 |
10-94320 |
SCREW, (.375-24 x 1.250) |
| 17 |
31-844338A01 |
BEARING/CAGE KIT |
| 18 |
NSS |
NOT SOLD SEPARATE, Bearing |
| 19 |
12-88263 |
THRUST WASHER |
| 20 |
29-8M0204715 |
NEEDLE, Roller Bearing |
| 21 |
31-816773A2 |
BEARING ASSEMBLY (UPPER) |
| 22 |
26-859093 |
SEAL |
| 23 |
25-823683 |
O-RING, (1.989 x .070) |
| 24 |
12-33001 |
WASHER, (.641 x 1.250 x .190) |
| 25 |
11-42979 |
NUT, (M16) |
▶Cyliner Block and End Caps (51 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
885-9811A19 |
CYLINDER BLOCK Comment: SN# 0G960499 & Below |
| 2 |
16-903509 |
STUD, (M10 x 1.5 x 64) |
| 3 |
16-8154431 |
STUD, (M10 x 1.5 x 155) |
| 4 |
22-328022 |
PLUG, Pipe (.125-27) Brass |
| 5 |
8248577 |
DEFLECTOR, Water |
| 6 |
21-8781051 |
CHECK VALVE |
| 7 |
8215832 |
PIN |
| 8 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 9 |
10-81893435 |
SCREW, (M8 x 35) |
| 10 |
10-82446180 |
SCREW, (M10 x 80) |
| 11 |
17-8M0036405 |
PIN |
| 12 |
19-850309001 |
PLUG |
| 13 |
NSS |
NOT SOLD SEPARATE, Plug-Serial Number |
| 14 |
8217621 |
TIMING POINTER |
| 15 |
10-82130012 |
SCREW, (M6 x 12) |
| 16 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 17 |
32-826544A1 |
TUBING KIT |
| 18 |
22-687271 |
FITTING, (.250-18) 90 Degree - Brass |
| 19 |
12-8M0214963 |
WASHER, (.406 x .750 x .105) Stainless Steel |
| 20 |
11-4013610 |
NUT, (M10) Stainless Steel |
| 21 |
8256751 |
BRACKET |
| 22 |
10-82130012 |
SCREW, (M6 x 12) |
| 23 |
8211051 |
BRACKET, Alternator |
| 24 |
10-81893450 |
SCREW, (M8 x 50) |
| 25 |
8212251 |
BRACKET |
| 26 |
10-82130012 |
SCREW, (M6 x 12) |
| 27 |
822486 |
BRACKET, Guide |
| 28 |
821909 |
SENSOR |
| 29 |
10-82104510 |
SCREW, (M5 x 10) |
| 30 |
818574 |
SEAL, Cylinder Head |
| 31 |
25-818573 |
O-RING |
| 32 |
812851A2 |
CYLINDER HEAD Comment: SN# 0G960499 & Below |
| 33 |
833072003 |
THERMOSTAT, 62° Celsius (143° Fahrenheit) |
| 34 |
27-8M0204714 |
GASKET, Thermostat |
| 35 |
19801A1 |
THERMOSTAT COVER |
| 36 |
22-8167811 |
ELBOW |
| 37 |
32-77653101 |
HOSE, (48.00 Inches Bulk) (20-1/2 IN.) Comment: (STARBOARD) |
| 38 |
10-82446090 |
SCREW, (M8 x 90) |
| 39 |
10-8M0045380 |
SCREW, (M8 x 50) |
| 40 |
13536A14 |
SENSOR ASSEMBLY, Temperature |
| 41 |
137151 |
RETAINER |
| 42 |
10-81893414 |
SCREW, (M8 x 14) |
| 43 |
1171-9787A4 |
END CAP ASSEMBLY |
| 44 |
25-62700 |
O-RING, (3.237 x .103) |
| 45 |
26-8308981 |
SEAL |
| 46 |
10-82130020 |
SCREW, (M6 x 20) |
| 47 |
8261211 |
BRACKET |
| 48 |
10-48408 |
SCREW, (#10-16 x .500) |
| 49 |
10-82130012 |
SCREW, (M6 x 12) |
| 50 |
8266241 |
CLAMP |
▶DRIVESHAFT HOUSING AND EXHAUST TUBE (33 parts)
| Ref |
OEM Part # |
Part Name |
| - |
NSS |
NOT SOLD SEPARATE, Strainer |
| 1 |
3519-832938A06 |
HOUSING ASSEMBLY, Driveshaft Comment: (X/XX-LONG) |
| 2 |
16-8M0008031 |
STUD, (M12 x 52) Comment: (LONG/X-LONG) |
| 3 |
10-857136 |
SCREW, (M12 x 35) Comment: (LONG/X-LONG) SN# 0G871323 & Up |
| 4 |
16-858570 |
STEPPED STUD Comment: (175MM X 10/12) |
| 5 |
25-8331231 |
GROMMET |
| 6 |
12-856982 |
WASHER, (.500 x .810 x .090) Stainless Steel |
| 7 |
11-896895 |
NUT, (M12 x 1.75) |
| 8 |
19-64649 |
PLUG |
| 9 |
10-898834 |
SCREW, (M14 x 178) |
| 10 |
88238A10 |
CABLE ASSEMBLY, Ground |
| 11 |
12-815432 |
WASHER, (.562 x 2.00 x .125) |
| 12 |
12-8154331 |
WASHER, (1.25 x 2.00 x .19) |
| 13 |
8137711 |
MOUNT |
| 14 |
12-825190 |
WASHER |
| 15 |
88238A10 |
CABLE ASSEMBLY, Ground |
| 16 |
10-41508 |
SCREW, (.250-20 x .500) Stainless Steel |
| 17 |
11-896602 |
NUT |
| 18 |
8186442 |
CLAMP |
| 19 |
10-81893435 |
SCREW, (M8 x 35) |
| 20 |
13-72521 |
LOCKWASHER, Internal Tooth |
| 21 |
8M0001136 |
COVER, Black |
| 22 |
10-69079 |
SCREW, (#10-16 x .440) |
| 23 |
8329321 |
SEAL |
| 24 |
833116A7 |
TUBE ASSEMBLY, Exhaust |
| 25 |
10-81893435 |
SCREW, (M8 x 35) |
| 26 |
32-8M0042787 |
TUBE, Water Comment: (XX-LONG) |
| 27 |
832940001 |
SEAL |
| 28 |
8329391 |
CLAMP |
| 29 |
8M0105088 |
SPACER Comment: (XX-LONG) |
| 30 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) Comment: (XX-LONG) |
| 31 |
16-824118 |
STUD (M10 X 1.5 X 173) Comment: (XX-LONG) |
| 32 |
11-400636 |
NUT (M10 X 1.5) Comment: (XX-LONG) |
▶DUAL ENGINE EXTENSION KIT (21 parts)
| Ref |
OEM Part # |
Part Name |
| - |
92876A9 |
EXTENSION KIT, Dual Engine |
| 1 |
71565A2 |
TUBE ASSEMBLY |
| 2 |
25-48462 |
O-RING, (.614 x .070) |
| 3 |
41055 |
MOUNT |
| 4 |
14-42100 |
TAB WASHER |
| 5 |
11-8M0041651 |
NUT, (.875-14) |
| 6 |
88404 |
TAB WASHER |
| 7 |
10-38601 |
SCREW, (.250-28 x 1.250) |
| 8 |
17729A1 |
BRACKET |
| 9 |
10-62055 |
SCREW, (.312-24 x 1.250) |
| 10 |
17728 |
TAB WASHER |
| 11 |
10-140001 |
SCREW, (.375-24 x 1.38) |
| 12 |
11-8M0204726 |
NUT, (.375-24) |
| 13 |
8M0026167 |
STEERING EYE |
| 14 |
23-23651 |
SLEEVE, (1.625) |
| 15 |
97931 |
TUBING, (4.00 Inches) |
| 16 |
8M0026098 |
COUPLER, (15.00 Inches) |
| 17 |
11-42099 |
NUT, (.562-18) |
| 18 |
22-821169 |
COUPLING |
| 19 |
12-34931 |
WASHER, (.406 x .734 x .063) Stainless Steel |
| 20 |
10-94319 |
SCREW, (.375-24 x 1.5) |
▶Driveshaft Housing and Exhaust Tube (33 parts)
| Ref |
OEM Part # |
Part Name |
| - |
NSS |
NOT SOLD SEPARATE, Strainer |
| 1 |
3519-832938A06 |
HOUSING ASSEMBLY, Driveshaft Comment: (X/XX-LONG) |
| 2 |
16-8M0008031 |
STUD, (M12 x 52) Comment: (LONG/X-LONG) |
| 3 |
10-857136 |
SCREW, (M12 x 35) Comment: (LONG/X-LONG) SN# 0G871323 & Up |
| 4 |
16-858570 |
STEPPED STUD (175MM X 10/12) |
| 5 |
25-8331231 |
GROMMET |
| 6 |
12-856982 |
WASHER, (.500 x .810 x .090) Stainless Steel |
| 7 |
11-896895 |
NUT, (M12 x 1.75) |
| 8 |
19-64649 |
PLUG |
| 9 |
10-898834 |
SCREW, (M14 x 178) |
| 10 |
88238A10 |
CABLE ASSEMBLY, Ground |
| 11 |
12-815432 |
WASHER, (.562 x 2.00 x .125) |
| 12 |
12-8154331 |
WASHER, (1.25 x 2.00 x .19) |
| 13 |
8137711 |
MOUNT |
| 14 |
12-825190 |
WASHER |
| 15 |
88238A10 |
CABLE ASSEMBLY, Ground |
| 16 |
10-41508 |
SCREW, (.250-20 x .500) Stainless Steel |
| 17 |
11-896602 |
NUT |
| 18 |
8186442 |
CLAMP |
| 19 |
10-81893435 |
SCREW, (M8 x 35) |
| 20 |
13-72521 |
LOCKWASHER, Internal Tooth |
| 21 |
8M0001136 |
COVER, Black Comment: (BLACK) |
| 22 |
10-69079 |
SCREW, (#10-16 x .440) |
| 23 |
8329321 |
SEAL |
| 24 |
833116A7 |
TUBE ASSEMBLY, Exhaust |
| 25 |
10-81893435 |
SCREW, (M8 x 35) |
| 26 |
32-8M0042787 |
TUBE, Water Comment: (XX-LONG) |
| 27 |
832940001 |
SEAL |
| 28 |
8329391 |
CLAMP |
| 29 |
8M0105088 |
SPACER Comment: (BLACK)(XX-LONG) |
| 30 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) Comment: (XX-LONG) |
| 31 |
16-824118 |
STUD (M10 X 1.5 X 173) Comment: (XX-LONG) |
| 32 |
11-400636 |
NUT (M10 X 1.5) Comment: (XX-LONG) |
▶Dual Engine Tie Bar Kit (21 parts)
| Ref |
OEM Part # |
Part Name |
| - |
92876A9 |
EXTENSION KIT, Dual Engine |
| 1 |
71565A2 |
TUBE ASSEMBLY |
| 2 |
25-48462 |
O-RING, (.614 x .070) |
| 3 |
41055 |
MOUNT |
| 4 |
14-42100 |
TAB WASHER |
| 5 |
11-8M0041651 |
NUT, (.875-14) |
| 6 |
88404 |
TAB WASHER |
| 7 |
10-38601 |
SCREW, (.250-28 x 1.250) |
| 8 |
17729A1 |
BRACKET |
| 9 |
10-62055 |
SCREW, (.312-24 x 1.250) |
| 10 |
17728 |
TAB WASHER |
| 11 |
10-140001 |
SCREW, (.375-24 x 1.38) |
| 12 |
11-8M0204726 |
NUT, (.375-24) Stainless Steel |
| 13 |
8M0026167 |
STEERING EYE |
| 14 |
23-23651 |
SLEEVE, (1.625) |
| 15 |
97931 |
TUBING, (4.00 Inches) |
| 16 |
8M0026098 |
COUPLER, (15.00 Inches) |
| 17 |
11-42099 |
NUT, (.562-18) |
| 18 |
22-821169 |
COUPLING |
| 19 |
12-37828 |
WASHER, (.390 x .625 x .062) Stainless Steel Comment: (.625 Outside Diameter) |
| 20 |
10-94319 |
SCREW, (.375-24 x 1.5) |
▶ELECTRICAL COMPONENTS (46 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
825296T1 |
PLATE, Electrical Mounting |
| 2 |
10-82129114 |
SCREW, (M6 x 14) |
| 3 |
827509T7 |
CDM MODULE ASSEMBLY |
| 4 |
84-857124A1 |
CABLE ASSEMBLY, Hi-Tension Comment: (SINGLE CABLE) |
| 5 |
85-857074A1 |
BOOT/TERMINAL KIT |
| 6 |
10-82129116 |
SCREW, (M6 x 16) |
| 7 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 8 |
33-941 |
SPARK PLUG (CHAMPION #QL77CC) |
| 9 |
10-81893435 |
SCREW, (M8 x 35) |
| 10 |
12-49436 |
WASHER |
| 11 |
25-825380001 |
GROMMET |
| 12 |
23-19064 |
BUSHING |
| 13 |
830044T16 |
ECU, Engine Control Unit Comment: (SEAPRO/MARATHON) |
| 14 |
10-82129145 |
SCREW, (M6 x 45) |
| 15 |
54-826188 |
CLAMP |
| 16 |
10-82104520 |
SCREW, (M5 x 20) (M5 X 20) |
| 17 |
84-825433A10 |
HARNESS ASSEMBLY, Ignition |
| 18 |
13541 |
PLUG, Male |
| 19 |
13540 |
CAP, Female |
| 20 |
8M0207773 |
RELAY ASSEMBLY |
| 21 |
828102 |
BRACKET |
| 22 |
25-818967 |
GROMMET |
| 23 |
23-8M0214955 |
BUSHING |
| 24 |
NSS |
NOT SOLD SEPARATE, Decal-Trim Relay |
| 25 |
84-826802A2 |
HARNESS ASSEMBLY, Trim |
| 26 |
84-88439A34 |
CABLE ASSEMBLY, Positive - Battery |
| 27 |
84-88439A24 |
CABLE ASSEMBLY, Negative - Battery |
| 28 |
84-827356A2 |
HARNESS ASSEMBLY (26 IN.) Comment: (OIL INJECTION) |
| 29 |
8216091 |
COVER |
| 30 |
10-82239320 |
SCREW, (M5 x 20) (M5 X 20) |
| 31 |
88-812619 |
FUSE, Yellow - 20 Ampere |
| 32 |
88-19637 |
SOCKET, Fuse |
| 33 |
84-93388A8 |
CABLE ASSEMBLY, (12.5 Inchs) Black |
| 34 |
8212282 |
PLATE, Solenoid Mounting |
| 35 |
10-82155025 |
SCREW, (M8 x 25) Stainless Steel |
| 36 |
10-82129125 |
SCREW, (M6 x 25) |
| 37 |
84-88807A16 |
CABLE ASSEMBLY, (4.00 Inches) Black |
| 38 |
86-45915 |
TERMINAL BLOCK |
| 39 |
10-878608 |
SCREW, (#10-16 x .500) |
| 40 |
10-878607 |
SCREW, (#10-16 x .380) |
| 41 |
89-817109A2 |
SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 42 |
25-822179 |
GROMMET |
| 43 |
23-8M0214955 |
BUSHING |
| 44 |
13-53166 |
LOCKWASHER, (.312) |
| 45 |
11-8M0204668 |
NUT, (.312-18) |
| 46 |
10-32,11-45076 |
NUT, Brass |
▶EXHAUST PLATE (42 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809793A00 |
POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 |
832935A1 |
PLATE ASSEMBLY, Exhaust |
| 2 |
27-8329335 |
GASKET |
| 3 |
27-8329344 |
GASKET (LOWER) |
| 4 |
24-64878 |
SPRING, (Black) |
| 5 |
8M0043157 |
SEAL |
| 6 |
10-81893435 |
SCREW, (M8 x 35) |
| 7 |
65663A2 |
COVER |
| 8 |
65664A1 |
PLATE ASSEMBLY |
| 9 |
27-88907003 |
GASKET |
| 10 |
10-69570 |
SCREW, (#10-16 x .750) |
| 11 |
12-76451 |
WASHER |
| 12 |
648771 |
DIAPHRAGM |
| 13 |
814189 |
POPPET |
| 14 |
25-814191 |
GROMMET |
| 15 |
814190 |
CARRIER |
| 16 |
10-81893435 |
SCREW, (M8 x 35) |
| 17 |
22-34982 |
CONNECTOR |
| 18 |
22-782792 |
FITTING, Elbow 45 Degree (1.25) (45 DEGREES) |
| 19 |
22-821975 |
ELBOW, 45 Degree (45 DEGREES) |
| 20 |
821255 |
BOOT, Idle Exhaust |
| 21 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 22 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (2-1/2 IN.) |
| 23 |
22-8M0077650 |
FITTING, Tell-Tale |
| 24 |
19-821908 |
PLUG |
| 25 |
12-821915 |
WASHER |
| 26 |
8219631 |
CHECK VALVE |
| 27 |
25-30641 |
O-RING, (.299 x .103) |
| 28 |
32-859626A1 |
FLUSH HOSE KIT |
| 29 |
32-821976 |
HOSE |
| 30 |
21-817519A1 |
CHECK VALVE ASSEMBLY, Drain |
| 31 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 32 |
11-401366 |
NUT, (M6) Stainless Steel |
| 33 |
12-35459 |
WASHER |
| 34 |
824012 |
ROLLER |
| 35 |
11-401386 |
NUT, (M6) |
| 36 |
883142A03 |
SHIFT LINK |
| 37 |
23-42994 |
BUSHING |
| 38 |
8240703 |
SHIFT SHAFT, Upper Comment: (XX-LONG) |
| 39 |
23-48237 |
BUSHING |
| 40 |
25-12602002 |
GROMMET |
| 41 |
43585 |
COUPLING |
▶Electrical Components (46 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
825296T1 |
PLATE, Electrical Mounting |
| 2 |
10-82129114 |
SCREW, (M6 x 14) |
| 3 |
827509T7 |
CDM MODULE ASSEMBLY |
| 4 |
84-857124A1 |
CABLE ASSEMBLY, Hi-Tension (SINGLE CABLE) |
| 5 |
85-857074A1 |
BOOT/TERMINAL KIT |
| 6 |
10-82129116 |
SCREW, (M6 x 16) |
| 7 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 8 |
33-941 |
SPARK PLUG |
| 9 |
10-81893435 |
SCREW, (M8 x 35) |
| 10 |
12-49436 |
WASHER |
| 11 |
25-825380001 |
GROMMET |
| 12 |
23-19064 |
BUSHING |
| 13 |
83004415T |
ECU, Engine Control Unit (CDI) Comment: (250) SN# 0G960499 & Below |
| 14 |
830046T08 |
ECU, Engine Control Unit (EFI) Comment: (250) SN# 0G960499 & Below |
| 15 |
10-82129145 |
SCREW, (M6 x 45) |
| 16 |
54-826188 |
CLAMP |
| 17 |
10-82104520 |
SCREW, (M5 x 20) (M5 X 20) |
| 18 |
84-825763A5 |
HARNESS ASSEMBLY (EFI) |
| 19 |
84-825433A11 |
HARNESS ASSEMBLY, Ignition |
| 20 |
8M0207773 |
RELAY ASSEMBLY |
| 21 |
25-818967 |
GROMMET |
| 22 |
828102 |
BRACKET |
| 23 |
23-8M0214955 |
BUSHING |
| 24 |
NSS |
NOT SOLD SEPARATE, Decal-Trim Relay |
| 25 |
84-826802A2 |
HARNESS ASSEMBLY, Trim |
| 26 |
84-88439A34 |
CABLE ASSEMBLY, Positive - Battery |
| 27 |
84-88439A24 |
CABLE ASSEMBLY, Negative - Battery |
| 28 |
84-827356A2 |
HARNESS ASSEMBLY (26 IN.) |
| 29 |
8216091 |
COVER |
| 30 |
10-82239320 |
SCREW, (M5 x 20) (M5 x 20) |
| 31 |
88-812619 |
FUSE, Yellow - 20 Ampere |
| 32 |
88-19637 |
SOCKET, Fuse |
| 33 |
84-93388A8 |
CABLE ASSEMBLY, (12.5 Inchs) Black |
| 34 |
8212282 |
PLATE, Solenoid Mounting |
| 35 |
10-82155025 |
SCREW, (M8 x 25) Stainless Steel |
| 36 |
10-82129125 |
SCREW, (M6 x 25) |
| 37 |
84-88807A16 |
CABLE ASSEMBLY, (4.00 Inches) Black |
| 38 |
86-45915 |
TERMINAL BLOCK |
| 39 |
10-878608 |
SCREW, (#10-16 x .500) |
| 40 |
10-878607 |
SCREW, (#10-16 x .380) |
| 41 |
89-817109A2 |
SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 42 |
25-822179 |
GROMMET |
| 43 |
23-8M0214955 |
BUSHING |
| 44 |
13-53166 |
LOCKWASHER, (.312) |
| 45 |
11-8M0204668 |
NUT, (.312-18) |
| 46 |
10-32,11-45076 |
NUT, Brass |
▶Exhaust Plate (42 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
832935A1 |
PLATE ASSEMBLY, Exhaust |
| 2 |
27-8329335 |
GASKET |
| 3 |
27-8329344 |
GASKET (LOWER) |
| 4 |
24-64878 |
SPRING |
| 5 |
8M0043157 |
SEAL |
| 6 |
10-81893435 |
SCREW, (M8 x 35) |
| 7 |
65663A2 |
COVER |
| 8 |
65664A1 |
PLATE ASSEMBLY |
| 9 |
27-88907003 |
GASKET |
| 10 |
10-69570 |
SCREW, (#10-16 x .750) |
| 11 |
12-76451 |
WASHER |
| 12 |
648771 |
DIAPHRAGM |
| 13 |
814189 |
POPPET |
| 14 |
25-814191 |
GROMMET |
| 15 |
814190 |
CARRIER |
| 16 |
10-81893435 |
SCREW, (M8 x 35) |
| 17 |
22-34982 |
CONNECTOR |
| 18 |
22-782792 |
FITTING, Elbow 45 Degree (1.25) (45 DEGREES) |
| 19 |
22-821975 |
ELBOW, 45 Degree (45 DEGREES) |
| 20 |
821255 |
BOOT, Idle Exhaust |
| 21 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 22 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (2-1/2 IN.) |
| 23 |
22-8M0077650 |
FITTING, Tell-Tale |
| 24 |
19-821908 |
PLUG |
| 25 |
12-821915 |
WASHER |
| 26 |
8219631 |
CHECK VALVE |
| 27 |
25-30641 |
O-RING, (.299 x .103) |
| 28 |
22-821952 |
FITTING |
| 29 |
32-821976 |
HOSE Comment: (LONG) |
| 30 |
21-817519A1 |
CHECK VALVE ASSEMBLY, Drain |
| 31 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 32 |
11-401386 |
NUT, (M6) |
| 33 |
12-35459 |
WASHER |
| 34 |
824012 |
ROLLER |
| 35 |
11-401386 |
NUT, (M6) |
| 36 |
883142A03 |
SHIFT LINK |
| 37 |
23-42994 |
BUSHING |
| 38 |
8240703 |
SHIFT SHAFT, Upper Comment: (XX-LONG) |
| 39 |
23-48237 |
BUSHING |
| 40 |
25-12602002 |
GROMMET |
| 41 |
43585 |
COUPLING |
▶FLYWHEEL/STATOR (12 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
11-401386 |
NUT, (M6) |
| 2 |
19-45907 |
PLUG, Yellow |
| 3 |
272-821033T2 |
FLYWHEEL |
| 4 |
398-821935A5 |
STATOR |
| 5 |
10-82494830 |
SCREW, (M6 x 30) |
| 6 |
821663A1 |
ALTERNATOR |
| 7 |
10-82446155 |
SCREW, (M10 x 55) |
| 8 |
10-82130140 |
SCREW, (M10 x 40) (M10 X 40) |
| 9 |
12-796431 |
WASHER |
| 10 |
11-4013610 |
NUT, (M10) Stainless Steel |
| 11 |
57-49756Q1 |
V BELT |
| 12 |
12-17457 |
WASHER |
▶FUEL LINES(NON OIL INJECTION) (22 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (5 IN.) |
| 2 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (4-1/2 IN.) |
| 3 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (16 IN.) |
| 4 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 5 |
10-4008820 |
SCREW, (M6 x 20) |
| 6 |
13-400256 |
LOCKWASHER, (M6) |
| 7 |
11-401386 |
NUT, (M6) |
| 8 |
23-82459612 |
OVERSLEEVE |
| 9 |
56762 |
TIE STRAP, (4.00 Inches) |
| 10 |
32-9912878 |
HOSE, (.187) (26.00 Inches Bulk) (8-3/4 IN.) |
| 11 |
32-9912878 |
HOSE, (.187) (26.00 Inches Bulk) (6 IN.) |
| 12 |
822528T |
SOLENOID VALVE |
| 13 |
8224931 |
BRACKET |
| 14 |
10-4005685 |
SCREW, (M4 x 10) |
| 15 |
12-30164 |
WASHER, (.192 x .375 x .0312) Stainless Steel |
| 16 |
8,13-26995 |
LOCKWASHER, Stainless Steel |
| 17 |
821664 |
SENSOR, Throttle Position (TPI) |
| 18 |
8212021 |
BRACKET, Sensor |
| 19 |
821153 |
COUPLING |
| 20 |
28-89694 |
KEY |
| 21 |
54-67015 |
CLAMP |
| 22 |
10-82130012 |
SCREW, (M6 x 12) |
▶FUEL LINES(OIL INJECTION) (38 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
22-822769 |
CONNECTOR |
| 2 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk) (1-1/2 IN.) |
| 3 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk) (13-1/2 IN.) |
| 4 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 5 |
22-8189941 |
CHECK VALVE |
| 6 |
32-82381335 |
TUBING, (15.00 Inches Bulk) (6 IN.) |
| 7 |
22-818992 |
CONNECTOR |
| 8 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (5 IN.) |
| 9 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (4-1/2 IN.) |
| 10 |
10-4008820 |
SCREW, (M6 x 20) |
| 11 |
13-400256 |
LOCKWASHER, (M6) |
| 12 |
11-401386 |
NUT, (M6) |
| 13 |
822528T |
SOLENOID VALVE |
| 14 |
8224931 |
BRACKET |
| 15 |
32-9912878 |
HOSE, (.187) (26.00 Inches Bulk) (8-3/4 IN.) |
| 16 |
32-9912878 |
HOSE, (.187) (26.00 Inches Bulk) (6 IN.) |
| 17 |
28-89694 |
KEY |
| 18 |
821153 |
COUPLING |
| 19 |
8212021 |
BRACKET, Sensor |
| 20 |
821664 |
SENSOR, Throttle Position (TPI) |
| 21 |
10-4005685 |
SCREW, (M4 x 10) |
| 22 |
12-30164 |
WASHER, (.192 x .375 x .0312) Stainless Steel |
| 23 |
8,13-26995 |
LOCKWASHER, Stainless Steel |
| 24 |
23-82459612 |
OVERSLEEVE |
| 25 |
56762 |
TIE STRAP, (4.00 Inches) |
| 26 |
32-830770 |
HOSE (OUTLET) Comment: SN# 0G960500 & Up |
| 27 |
32-830769 |
HOSE (INLET)(8-1/4IN.) Comment: SN# 0G960500 & Up |
| 28 |
35-826634T01 |
FILTER, Fuel Comment: SN# 0G960500 & Up |
| 29 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (16 IN.) Comment: SN# 0G960500 & Up |
| 30 |
826635 |
BRACKET Comment: SN# 0G960500 & Up |
| 31 |
10-82130012 |
SCREW, (M6 x 12) Comment: SN# 0G960500 & Up |
| 32 |
54-67015 |
CLAMP Comment: SN# 0G960500 & Up |
| 33 |
10-82130012 |
SCREW, (M6 x 12) |
| 34 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk) (4 IN.) Comment: SN# 0G960499 & Below |
| 35 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk) (7 IN.) Comment: SN# 0G960499 & Below |
| 36 |
35-816296Q2 |
FILTER, Fuel Comment: SN# 0G960499 & Below |
| 37 |
54-49542 |
CLAMP Comment: SN# 0G960499 & Below |
| 38 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (6-1/2 IN.) Comment: SN# 0G960499 & Below |
▶FUEL PUMP (26 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809793A00 |
POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 |
NSS |
NOT SOLD SEPARATE, Fuel Pump |
| 2 |
21-857005A1 |
DIAPHRAGM KIT |
| 3 |
NSS |
NOT SOLD SEPARATE, Diaphragm |
| 4 |
NSS |
NOT SOLD SEPARATE, Retainer |
| 5 |
NSS |
NOT SOLD SEPARATE, Spring |
| 6 |
NSS |
NOT SOLD SEPARATE, Cap |
| 7 |
NSS |
NOT SOLD SEPARATE, Spring |
| 8 |
NSS |
NOT SOLD SEPARATE, Cap |
| 9 |
NSS |
NOT SOLD SEPARATE, Diaphragm |
| 10 |
NSS |
NOT SOLD SEPARATE, Gasket-Boost |
| 11 |
NSS |
NOT SOLD SEPARATE, Gasket-Pulse |
| 12 |
27-8M0204705 |
GASKET |
| 13 |
144303 |
BASE |
| 14 |
987752 |
PLATE |
| 15 |
10-82104540 |
SCREW, (M5 x 40) |
| 16 |
NSS |
NOT SOLD SEPARATE, Decal-Assembled in Mexico |
| 17 |
10-82130050 |
SCREW, (M6 x 50) |
| 18 |
22-629101 |
FITTING, Elbow - 90 Degree (.125-27) |
| 19 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 20 |
10-82130012 |
SCREW, (M6 x 12) |
| 21 |
826635 |
BRACKET |
| 22 |
35-826634T01 |
FILTER, Fuel |
| 23 |
32-830769 |
HOSE (INLET) |
| 24 |
32-830770 |
HOSE (OUTLET) |
| 25 |
22-822769 |
CONNECTOR |
▶Flywheel/Stator (12 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
11-401386 |
NUT, (M6) |
| 2 |
19-45907 |
PLUG, Yellow |
| 3 |
272-821033T2 |
FLYWHEEL |
| 4 |
398-821935A5 |
STATOR |
| 5 |
10-82494830 |
SCREW, (M6 x 30) |
| 6 |
821663A1 |
ALTERNATOR |
| 7 |
10-82446155 |
SCREW, (M10 x 55) |
| 8 |
10-82130140 |
SCREW, (M10 x 40) |
| 9 |
12-796431 |
WASHER |
| 10 |
11-4013610 |
NUT, (M10) Stainless Steel |
| 11 |
57-49756Q1 |
V BELT |
| 12 |
12-17457 |
WASHER |
▶Fuel Management System (33 parts)
| Ref |
OEM Part # |
Part Name |
| - |
825818A12 |
MANAGEMENT ASSEMBLY, Fuel Comment: (225 2 Shutter) SN# 0G960499 & Below |
| 1 |
827693T5 |
THROTTLE BODY Comment: (2 SHUTTER) |
| 2 |
8090571 |
JOINT KIT, Fuel Pipe |
| 3 |
10-8276983 |
SCREW KIT |
| 4 |
150291 |
O-RING KIT |
| 5 |
814233T1 |
FMA JOINT KIT |
| 6 |
8090591 |
SCHRADER VALVE KIT |
| 7 |
32-827694A02 |
TUBING KIT |
| 8 |
32-897992A01 |
TUBING KIT |
| 9 |
8090843 |
SHAFT, Throttle Comment: (TOP-4 SHUTTER) |
| 10 |
8090842 |
SHAFT KIT, Throttle Comment: (BOTTOM) |
| 11 |
827697A1 |
LEVER KIT, Link |
| 12 |
154441 |
LINK |
| 13 |
8276991 |
FUEL RAIL |
| 14 |
84-154432 |
HARNESS KIT |
| 15 |
8276921 |
COVER |
| 16 |
26-187921 |
SEAL |
| 17 |
827696 |
RETAINER KIT |
| 18 |
809093 |
BRACKET KIT, TPS |
| 19 |
805225A1 |
INJECTOR KIT |
| 20 |
67748 |
ROLLER |
| 21 |
28-89694 |
KEY |
| 22 |
821153 |
COUPLING |
| 23 |
821664 |
SENSOR, Throttle Position |
| 24 |
10-4005685 |
SCREW, (M4 x 10) |
| 25 |
8,13-26995 |
LOCKWASHER, Stainless Steel |
| 26 |
12-30164 |
WASHER, (.192 x .375 x .0312) Stainless Steel |
| 27 |
13221T01 |
SENSOR ASSEMBLY, Temperature |
| 28 |
10-4005685 |
SCREW, (M4 x 10) |
| 29 |
8,13-26995 |
LOCKWASHER, Stainless Steel |
| 30 |
25-45711 |
O-RING, (.612 x .103) |
| 31 |
10-40132 |
SCREW, (M8 x 125) |
| 32 |
12-8M0042642 |
WASHER, (.323 x .563 x .063) Stainless Steel |
▶Fuel Pump (29 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
NSS |
NOT SOLD SEPARATE, Fuel Pump |
| 2 |
21-857005A1 |
DIAPHRAGM KIT |
| 3 |
NSS |
NOT SOLD SEPARATE, Diaphragm |
| 4 |
NSS |
NOT SOLD SEPARATE, Retainer |
| 5 |
NSS |
NOT SOLD SEPARATE, Spring |
| 6 |
NSS |
NOT SOLD SEPARATE, Cap |
| 7 |
NSS |
NOT SOLD SEPARATE, Spring |
| 8 |
NSS |
NOT SOLD SEPARATE, Cap |
| 9 |
NSS |
NOT SOLD SEPARATE, Diaphragm |
| 10 |
NSS |
NOT SOLD SEPARATE, Gasket-Boost |
| 11 |
NSS |
NOT SOLD SEPARATE, Gasket-Pulse |
| 12 |
27-8M0204705 |
GASKET |
| 13 |
144303 |
BASE |
| 14 |
987752 |
PLATE |
| 15 |
10-82104540 |
SCREW, (M5 x 40) |
| 16 |
NSS |
NOT SOLD SEPARATE, Decal |
| 17 |
10-82130050 |
SCREW, (M6 x 50) |
| 18 |
22-629101 |
FITTING, Elbow - 90 Degree (.125-27) |
| 19 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 20 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk) (17 IN.) |
| 21 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk) (17 IN.) Comment: SN# 0G960499 & Below |
| 22 |
22-822769 |
CONNECTOR |
| 23 |
35-18458Q4 |
FILTER KIT |
| 24 |
8M0204710 |
PROBE |
| 25 |
13170A3 |
BASE |
| 26 |
22-136071 |
ELBOW |
| 27 |
10-82130030 |
SCREW, (M6 x 30) |
| 28 |
22-89771Q2 |
CONNECTOR, (.250-18) |
▶GEAR HOUSING CHART(S/N-0G960499 & BELOW) (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
45-826353A1 |
EXTENSION KIT, Driveshaft Comment: (XX-LONG-30 IN.) |
▶GEAR HOUSING CHART(S/N-0G960500 & UP) (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
1623-859399T16 |
GEAR HOUSING ASSEMBLY, Complete (4.75 Inch/120.65 mm Torpedo Diameter) Comment: (COUNTER ROTATION 1.75:1 GEAR RATIO) |
▶GEAR HSG(DRIVE-STD/COUNTER-S/N-0G960499 & BELOW) (46 parts)
| Ref |
OEM Part # |
Part Name |
| - |
47-8M0100526 |
REPAIR KIT, Water Pump Impeller |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
17-379721 |
PIN |
| 3 |
821526001 |
FILLER BLOCK |
| 4 |
22-8M0058389 |
FITTING KIT, Magnetic, Plug Fill/Drain |
| 5 |
12-191833 |
WASHER, Fiber |
| 6 |
97-826134Q |
ANODE |
| 7 |
10-4000333 |
SCREW, (M6 x 40) |
| 8 |
11-401386 |
NUT, (M6) |
| 9 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 10 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 11 |
10-79953Q04 |
SCREW KIT, (.375-16 x .250) |
| 12 |
12-191833 |
WASHER, Fiber |
| 13 |
22-85822A6 |
CONNECTOR Comment: (XXL) |
| 14 |
56762 |
TIE STRAP, (4.00 Inches) |
| 15 |
NSS |
NOT SOLD SEPARATE, Pinion Gear (PART OF 43-828168A2 or 43-828170A2 or 43-828695A1) |
| 16 |
12-92721 |
WASHER |
| 17 |
11-35921 |
NUT, (.625-18) |
| 18 |
23-815921A4 |
BUSHING ASSEMBLY |
| 19 |
26-8M0204708 |
SEAL, Oil |
| 20 |
25-8M0214927 |
O-RING, (.799) |
| 21 |
10-1993716 |
SCREW, (M6 x 16) |
| 22 |
12-77674 |
WASHER |
| 23 |
824145 |
SHIFT SHAFT (LOWER) |
| 24 |
45-8M0140442 |
DRIVESHAFT (LOWER) |
| 25 |
28-8M0204723 |
KEY |
| 26 |
15-42637A1 |
SHIM SET |
| 27 |
31-8M0146566 |
BEARING, Roller |
| 28 |
NSS |
NOT SOLD SEPARATE, Cup |
| 29 |
8245191 |
RETAINER |
| 30 |
8M0214948 |
CARRIER ASSEMBLY |
| 31 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 32 |
26-8M0214939 |
SEAL, Oil |
| 33 |
26-8M0214939 |
SEAL, Oil |
| 34 |
817275A1 |
HOUSING KIT, Water Pump |
| 35 |
26-816575A2 |
SEAL KIT |
| 36 |
27-430331 |
GASKET |
| 37 |
27-8172771 |
GASKET |
| 38 |
8M0204709 |
FACEPLATE |
| 39 |
47-43026T2 |
IMPELLER |
| 40 |
10-1993716 |
SCREW, (M6 x 16) |
| 41 |
832942A1 |
COUPLING ASSEMBLY |
| 42 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 43 |
25-8M0204654 |
O-RING, (1.046) |
| 44 |
45-826353A1 |
EXTENSION KIT, Driveshaft Comment: (XX-LONG -30 IN.)(SEE NOTE) |
| 45 |
823902 |
COUPLING Comment: (XX-LONG) |
▶GEAR HSG(DRIVESHAFT-STD/COUNTER-S/N-0G960500 & UP) (47 parts)
| Ref |
OEM Part # |
Part Name |
| - |
47-8M0100526 |
REPAIR KIT, Water Pump Impeller |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
17-379721 |
PIN |
| 3 |
821526001 |
FILLER BLOCK |
| 4 |
859402 |
PITOT TUBE |
| 5 |
97-826134Q |
ANODE |
| 6 |
10-4000333 |
SCREW, (M6 x 40) |
| 7 |
11-401386 |
NUT, (M6) |
| 8 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 9 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 10 |
10-79953Q04 |
SCREW KIT, (.375-16 x .250) |
| 11 |
12-191833 |
WASHER, Fiber |
| 12 |
32-85944975 |
TUBING, (52.00 Inches) Comment: (X-LONG - 12 IN) |
| 13 |
22-881866 |
FITTING |
| 14 |
858934 |
COVER |
| 15 |
27-858935 |
GASKET |
| 16 |
NSS |
NOT SOLD SEPARATE Comment: Pinion Gear (Part of 43-859321A3 or 43-828695A1) |
| 17 |
12-92721 |
WASHER |
| 18 |
11-35921 |
NUT, (.625-18) |
| 19 |
26-8M0204708 |
SEAL, Oil |
| 20 |
25-8M0214927 |
O-RING, (.799) |
| 21 |
10-1993716 |
SCREW, (M6 x 16) |
| 22 |
12-77674 |
WASHER |
| 23 |
824145 |
SHIFT SHAFT (LOWER) |
| 24 |
45-881942 |
DRIVESHAFT Comment: (X-LONG) |
| 25 |
15-8M0063268 |
SHIM ASSEMBLY |
| 26 |
31-8M0146553 |
BEARING, Tapered Roller |
| 27 |
NSS |
NOT SOLD SEPARATE, Cup |
| 28 |
28-8M0204723 |
KEY |
| 29 |
15-42637A1 |
SHIM SET |
| 30 |
31-8M0146566 |
BEARING, Roller |
| 31 |
NSS |
NOT SOLD SEPARATE, Cup |
| 32 |
8245191 |
RETAINER |
| 33 |
8M0214948 |
CARRIER ASSEMBLY |
| 34 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 35 |
26-8M0214939 |
SEAL, Oil |
| 36 |
26-8M0214939 |
SEAL, Oil |
| 37 |
817275A1 |
HOUSING KIT, Water Pump |
| 38 |
26-816575A2 |
SEAL KIT |
| 39 |
27-430331 |
GASKET |
| 40 |
27-8172771 |
GASKET |
| 41 |
8M0204709 |
FACEPLATE |
| 42 |
47-43026T2 |
IMPELLER |
| 43 |
10-1993716 |
SCREW, (M6 x 16) |
| 44 |
832942A1 |
COUPLING ASSEMBLY |
| 45 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 46 |
25-8M0204654 |
O-RING, (1.046) |
▶GEAR HSG(PROP SHAFT-STD-S/N-0G960499 & BELOW) (31 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 46 |
8M0226861 |
SHIFT CRANK |
| 47 |
8M0235940 |
SPOOL ASSEMBLY |
| 48 |
NSS |
NOT SOLD SEPARATE, Shift Spool |
| 49 |
NSS |
NOT SOLD SEPARATE, Cotter Pin |
| 50 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 51 |
43-878611A2 |
GEAR SET, Forward And Pinion Comment: (1.87:1 - 15/28) |
| 52 |
15-44491A1 |
SHIM SET |
| 53 |
31-30894A1 |
BEARING SET, Cup And Cone |
| 54 |
NSS |
NOT SOLD SEPARATE, Cup |
| 55 |
53-856823 |
RING, Retaining |
| 56 |
31-30895T |
BEARING, Needle |
| 57 |
24-30893 |
SPRING |
| 58 |
52-859340T |
CLUTCH |
| 59 |
17-828356 |
PIN, Detent |
| 60 |
17-8M0100263 |
PIN, Cross |
| 61 |
44-8M0140440 |
PROPELLER SHAFT |
| 62 |
43-828171A1 |
GEAR, Reverse Comment: (1.87:1 - 15/28) |
| 63 |
23-824108 |
SPACER |
| 64 |
681001 |
RING, Thrust |
| 65 |
30-88957T |
BEARING, Ball |
| 66 |
25-8M0214920 |
O-RING |
| 67 |
818763T11 |
CARRIER ASSEMBLY, Bearing |
| 68 |
31-30956T |
BEARING, Needle |
| 69 |
26-14077 |
SEAL, Oil (INSIDE) |
| 70 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 71 |
14-18323 |
TAB WASHER |
| 72 |
8M2011027 |
RETAINER |
| 73 |
97-76214Q5 |
ANODE KIT |
| 74 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶GEAR HSG(PROPSHAFT-C/R-S/N-0G960499 & BELOW) (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 47 |
8M0226861 |
SHIFT CRANK |
| 48 |
8M0235940 |
SPOOL ASSEMBLY |
| 49 |
NSS |
NOT SOLD SEPARATE, Spool |
| 50 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 51 |
NSS |
NOT SOLD SEPARATE, Cotter Pin |
| 52 |
15-44491A1 |
SHIM SET |
| 53 |
828830A2 |
ADAPTOR ASSEMBLY, Bearing |
| 54 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 55 |
12-815481 |
THRUST WASHER |
| 56 |
31-815480 |
BEARING, Thrust |
| 57 |
43-828696T2 |
GEAR, Reverse (12/21) |
| 58 |
31-15844 |
BEARING ASSEMBLY, Roller |
| 59 |
24-30893 |
SPRING |
| 60 |
52-859340T |
CLUTCH |
| 61 |
17-8M0100263 |
PIN, Cross |
| 62 |
17-828356 |
PIN, Detent |
| 63 |
44-8M0140448 |
PROPELLER SHAFT |
| 64 |
43-828695A1 |
GEAR SET, Forward/Pinion (12/21) |
| 65 |
23-1761526 |
SPACER SHIM, (.230) |
| 66 |
31-815480 |
BEARING, Thrust |
| 67 |
12-815481 |
THRUST WASHER |
| 68 |
828831A3 |
ADAPTOR ASSEMBLY, Bearing |
| 69 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 70 |
12-18448 |
THRUST WASHER |
| 71 |
31-15842 |
BEARING, Thrust |
| 72 |
8182911 |
RACE, Thrust |
| 73 |
814605 |
KEEPER |
| 74 |
25-8M0214920 |
O-RING |
| 75 |
818290T8 |
CARRIER ASSEMBLY, Bearing |
| 76 |
31-30956T |
BEARING, Needle |
| 77 |
26-14077 |
SEAL, Oil (INSIDE) |
| 78 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 79 |
14-18323 |
TAB WASHER |
| 80 |
8M2011027 |
RETAINER |
| 81 |
97-76214Q5 |
ANODE KIT |
| 82 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶GEAR HSG(PROPSHAFT-C/R-S/N-0G960500 & UP) (39 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 48 |
22-859403 |
PLUG |
| 49 |
8M0226861 |
SHIFT CRANK |
| 50 |
8M0235940 |
SPOOL ASSEMBLY |
| 51 |
NSS |
NOT SOLD SEPARATE, Spool |
| 52 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 53 |
18-469501 |
COTTER PIN |
| 54 |
15-44491A1 |
SHIM SET |
| 55 |
828830A2 |
ADAPTOR ASSEMBLY, Bearing |
| 56 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 57 |
12-815481 |
THRUST WASHER |
| 58 |
31-815480 |
BEARING, Thrust |
| 59 |
43-828696T2 |
GEAR, Reverse (12/21) |
| 60 |
31-15844 |
BEARING ASSEMBLY, Roller |
| 61 |
24-30893 |
SPRING |
| 62 |
52-859340T |
CLUTCH |
| 63 |
17-8M0100263 |
PIN, Cross |
| 64 |
17-828356 |
PIN, Detent |
| 65 |
44-8M0140448 |
PROPELLER SHAFT |
| 66 |
43-828695A1 |
GEAR SET, Forward/Pinion (12/21) |
| 67 |
23-1761526 |
SPACER SHIM, (.230) |
| 68 |
31-815480 |
BEARING, Thrust |
| 69 |
12-815481 |
THRUST WASHER |
| 70 |
828831A3 |
ADAPTOR ASSEMBLY, Bearing |
| 71 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 72 |
12-18448 |
THRUST WASHER |
| 73 |
31-15842 |
BEARING, Thrust |
| 74 |
8182911 |
RACE, Thrust |
| 75 |
814605 |
KEEPER |
| 76 |
25-8M0214920 |
O-RING |
| 77 |
818290T8 |
CARRIER ASSEMBLY, Bearing |
| 78 |
31-30956T |
BEARING, Needle |
| 79 |
26-14077 |
SEAL, Oil (INSIDE) |
| 80 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 81 |
14-18323 |
TAB WASHER |
| 82 |
8M2011027 |
RETAINER |
| 83 |
97-76214Q5 |
ANODE KIT |
| 84 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶GEAR HSG(PROPSHAFT-STD-S/N-0G960500 & UP) (32 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 47 |
22-859403 |
PLUG |
| 48 |
8M0226861 |
SHIFT CRANK |
| 49 |
8M0235940 |
SPOOL ASSEMBLY |
| 50 |
NSS |
NOT SOLD SEPARATE, Shift Spool |
| 51 |
18-469501 |
COTTER PIN |
| 52 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 53 |
43-859321A3 |
GEAR SET, Forward/Pinion (12/21) |
| 54 |
15-44491A1 |
SHIM SET |
| 55 |
31-30894A1 |
BEARING SET, Cup And Cone |
| 56 |
NSS |
NOT SOLD SEPARATE, Cup |
| 57 |
53-856823 |
RING, Retaining |
| 58 |
31-30895T |
BEARING, Needle |
| 59 |
24-30893 |
SPRING |
| 60 |
52-859340T |
CLUTCH |
| 61 |
17-828356 |
PIN, Detent |
| 62 |
17-8M0100263 |
PIN, Cross |
| 63 |
44-8M0140440 |
PROPELLER SHAFT |
| 64 |
43-859322A1 |
GEAR, Reverse (12/21) |
| 65 |
23-824108 |
SPACER |
| 66 |
681001 |
RING, Thrust |
| 67 |
30-88957T |
BEARING, Ball |
| 68 |
25-8M0214920 |
O-RING |
| 69 |
818763T11 |
CARRIER ASSEMBLY, Bearing |
| 70 |
31-30956T |
BEARING, Needle |
| 71 |
26-14077 |
SEAL, Oil (INSIDE) |
| 72 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 73 |
14-18323 |
TAB WASHER |
| 74 |
8M2011027 |
RETAINER |
| 75 |
97-76214Q5 |
ANODE KIT |
| 76 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶Gear Housing Chart(S/N-0G960499 & Below) (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
45-826353A1 |
EXTENSION KIT, Driveshaft Comment: (XX-LONG-30 IN.) |
▶Gear Housing Chart(S/N-0G960500 & Up) (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
1623-859399T17 |
GEAR HOUSING ASSEMBLY, Complete (4.75 Inch/120.65 mm Torpedo Diameter) Comment: (COUNTER ROTATION)(XX-LONG) |
▶Gear Hsg(Driveshaft) (C/R)(S/N-0G960499 & Below) (46 parts)
| Ref |
OEM Part # |
Part Name |
| - |
47-8M0100526 |
REPAIR KIT, Water Pump Impeller |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic Comment: (BLACK) |
| 2 |
17-379721 |
PIN |
| 3 |
821526001 |
FILLER BLOCK |
| 4 |
22-8M0058389 |
FITTING KIT, Magnetic, Plug Fill/Drain |
| 5 |
12-191833 |
WASHER |
| 6 |
97-826134Q |
ANODE |
| 7 |
10-4000333 |
SCREW, (M6 x 40) |
| 8 |
11-401386 |
NUT, (M6) |
| 9 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 10 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 11 |
10-79953Q04 |
SCREW KIT, (.375-16 x .250) Drain |
| 12 |
12-191833 |
WASHER |
| 13 |
22-85822A6 |
CONNECTOR Comment: (XXL) |
| 14 |
56762 |
TIE STRAP, (4.00 Inches) |
| 15 |
NSS |
NOT SOLD SEPARATE, Pinion Gear (PART OF 43-828695A1) |
| 16 |
12-92721 |
WASHER |
| 17 |
11-35921 |
NUT, (.625-18) |
| 18 |
23-815921A4 |
BUSHING ASSEMBLY |
| 19 |
26-8M0204708 |
SEAL, Oil |
| 20 |
25-8M0214927 |
O-RING, (.799) |
| 21 |
10-1993716 |
SCREW, (M6 x 16) |
| 22 |
12-77674 |
WASHER |
| 23 |
824145 |
SHIFT SHAFT (LOWER) |
| 24 |
45-8M0140442 |
DRIVESHAFT (LOWER) |
| 25 |
28-8M0204723 |
KEY |
| 26 |
15-42637A1 |
SHIM SET |
| 27 |
31-8M0146566 |
BEARING, Roller |
| 28 |
NSS |
NOT SOLD SEPARATE, Cup |
| 29 |
8245191 |
RETAINER |
| 30 |
8M0214948 |
CARRIER ASSEMBLY |
| 31 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 32 |
26-8M0214939 |
SEAL, Oil |
| 33 |
26-8M0214939 |
SEAL, Oil |
| 34 |
817275A1 |
PUMP ASSEMBLY, Water |
| 35 |
26-816575A2 |
SEAL KIT |
| 36 |
27-430331 |
GASKET |
| 37 |
27-8172771 |
GASKET |
| 38 |
8M0204709 |
FACEPLATE |
| 39 |
47-43026T2 |
IMPELLER |
| 40 |
10-1993716 |
SCREW, (M6 x 16) |
| 41 |
832942A1 |
COUPLING ASSEMBLY |
| 42 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 43 |
25-8M0204654 |
O-RING, (1.046) |
| 44 |
45-826353A1 |
EXTENSION KIT, Driveshaft Comment: (XXL)(SEE NOTE) |
| 45 |
823902 |
COUPLING |
▶Gear Hsg(Driveshaft) (Std)(S/N-0G960499 & Below) (46 parts)
| Ref |
OEM Part # |
Part Name |
| - |
47-8M0100526 |
REPAIR KIT, Water Pump Impeller |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic Comment: (BLACK) |
| 2 |
17-379721 |
PIN |
| 3 |
821526001 |
FILLER BLOCK |
| 4 |
22-8M0058389 |
FITTING KIT, Magnetic, Plug Fill/Drain |
| 5 |
12-191833 |
WASHER |
| 6 |
97-826134Q |
ANODE |
| 7 |
10-4000333 |
SCREW, (M6 x 40) |
| 8 |
11-401386 |
NUT, (M6) |
| 9 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 10 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 11 |
10-79953Q04 |
SCREW KIT, (.375-16 x .250) Drain |
| 12 |
12-191833 |
WASHER |
| 13 |
22-85822A6 |
CONNECTOR Comment: (XXL) |
| 14 |
56762 |
TIE STRAP, (4.00 Inches) |
| 15 |
NSS |
NOT SOLD SEPARATE, Pinion Gear (PART OF 43-828170A2) Comment: (1.87:1 - 15/28) |
| 16 |
12-92721 |
WASHER |
| 17 |
11-35921 |
NUT, (.625-18) |
| 18 |
23-815921A4 |
BUSHING ASSEMBLY |
| 19 |
26-8M0204708 |
SEAL, Oil |
| 20 |
25-8M0214927 |
O-RING, (.799) |
| 21 |
10-1993716 |
SCREW, (M6 x 16) |
| 22 |
12-77674 |
WASHER |
| 23 |
824145 |
SHIFT SHAFT (LOWER) |
| 24 |
45-8M0140442 |
DRIVESHAFT (LOWER) |
| 25 |
28-8M0204723 |
KEY |
| 26 |
15-42637A1 |
SHIM SET |
| 27 |
31-8M0146566 |
BEARING, Roller |
| 28 |
NSS |
NOT SOLD SEPARATE, Cup |
| 29 |
8245191 |
RETAINER |
| 30 |
8M0214948 |
CARRIER ASSEMBLY |
| 31 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 32 |
26-8M0214939 |
SEAL, Oil |
| 33 |
26-8M0214939 |
SEAL, Oil |
| 34 |
817275A1 |
PUMP ASSEMBLY, Water |
| 35 |
26-816575A2 |
SEAL KIT |
| 36 |
27-430331 |
GASKET |
| 37 |
27-8172771 |
GASKET |
| 38 |
8M0204709 |
FACEPLATE |
| 39 |
47-43026T2 |
IMPELLER |
| 40 |
10-1993716 |
SCREW, (M6 x 16) |
| 41 |
832942A1 |
COUPLING ASSEMBLY |
| 42 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 43 |
25-8M0204654 |
O-RING, (1.046) |
| 44 |
45-826353A1 |
EXTENSION KIT, Driveshaft Comment: (XX-LONG -30 IN.)(SEE NOTE) |
| 45 |
823902 |
COUPLING Comment: XX-LONG |
▶Gear Hsg(Driveshaft)(C/R)(S/N-0G960500 & Up) (48 parts)
| Ref |
OEM Part # |
Part Name |
| - |
47-8M0100526 |
REPAIR KIT, Water Pump Impeller |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
17-379721 |
PIN |
| 3 |
821526001 |
FILLER BLOCK |
| 4 |
859402 |
PITOT TUBE |
| 5 |
97-826134Q |
ANODE |
| 6 |
10-4000333 |
SCREW, (M6 x 40) |
| 7 |
11-401386 |
NUT, (M6) Stainless Steel |
| 8 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 9 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 10 |
10-79953Q04 |
SCREW KIT, (.375-16 x .250) Drain |
| 11 |
12-191833 |
WASHER |
| 12 |
32-85944975 |
TUBING, (72.00 Inches Bulk) Comment: (XX-LONG - 17 IN.) |
| 13 |
22-881866 |
FITTING |
| 14 |
858934 |
COVER |
| 15 |
27-858935 |
GASKET |
| 16 |
NSS |
NOT SOLD SEPARATE, Pinion Gear Comment: (1.75:1 - 12/21) (PART OF 43-828695A1) |
| 17 |
12-92721 |
WASHER |
| 18 |
11-35921 |
NUT, (.625-18) |
| 19 |
26-8M0204708 |
SEAL, Oil |
| 20 |
25-8M0214927 |
O-RING, (.799) |
| 21 |
10-1993716 |
SCREW, (M6 x 16) |
| 22 |
12-77674 |
WASHER |
| 23 |
824145 |
SHIFT SHAFT (LOWER) |
| 24 |
45-881943 |
DRIVESHAFT Comment: (XX-LONG) |
| 25 |
15-8M0063268 |
SHIM ASSEMBLY |
| 26 |
31-8M0146553 |
BEARING, Tapered Roller |
| 27 |
NSS |
NOT SOLD SEPARATE, Cup |
| 28 |
28-8M0204723 |
KEY |
| 29 |
15-42637A1 |
SHIM SET |
| 30 |
31-8M0146566 |
BEARING, Roller |
| 31 |
NSS |
NOT SOLD SEPARATE, Cup |
| 32 |
8245191 |
RETAINER |
| 33 |
8M0214948 |
CARRIER ASSEMBLY |
| 34 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 35 |
26-8M0214939 |
SEAL, Oil |
| 36 |
26-8M0214939 |
SEAL, Oil |
| 37 |
817275A1 |
PUMP ASSEMBLY, Water |
| 38 |
26-816575A2 |
SEAL KIT |
| 39 |
27-430331 |
GASKET |
| 40 |
27-8172771 |
GASKET |
| 41 |
8M0204709 |
FACEPLATE |
| 42 |
47-43026T2 |
IMPELLER |
| 43 |
10-1993716 |
SCREW, (M6 x 16) |
| 44 |
832942A1 |
COUPLING ASSEMBLY |
| 45 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 46 |
25-8M0204654 |
O-RING, (1.046) |
| 47 |
NSS |
NOT SOLD SEPARATE, Decal-Counter Rotation |
▶Gear Hsg(Driveshaft)(Std)(S/N-0G960500 & Up) (47 parts)
| Ref |
OEM Part # |
Part Name |
| - |
47-8M0100526 |
REPAIR KIT, Water Pump Impeller |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
17-379721 |
PIN |
| 3 |
821526001 |
FILLER BLOCK |
| 4 |
859402 |
PITOT TUBE |
| 5 |
97-826134Q |
ANODE |
| 6 |
10-4000333 |
SCREW, (M6 x 40) |
| 7 |
11-401386 |
NUT, (M6) Stainless Steel |
| 8 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 9 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 10 |
10-79953Q04 |
SCREW KIT, (.375-16 x .250) Drain |
| 11 |
12-191833 |
WASHER |
| 12 |
32-85944975 |
TUBING, (72.00 Inches Bulk) Comment: (XX-LONG - 17 IN.) |
| 13 |
22-881866 |
FITTING |
| 14 |
858934 |
COVER |
| 15 |
27-858935 |
GASKET |
| 16 |
NSS |
NOT SOLD SEPARATE, Pinion Gear Comment: (1.75:1 - 12/21) (PART OF 43-859321A3) |
| 17 |
12-92721 |
WASHER |
| 18 |
11-35921 |
NUT, (.625-18) |
| 19 |
26-8M0204708 |
SEAL, Oil |
| 20 |
25-8M0214927 |
O-RING, (.799) |
| 21 |
10-1993716 |
SCREW, (M6 x 16) |
| 22 |
12-77674 |
WASHER |
| 23 |
824145 |
SHIFT SHAFT (LOWER) |
| 24 |
45-881943 |
DRIVESHAFT Comment: (XX-LONG) |
| 25 |
15-8M0063268 |
SHIM ASSEMBLY |
| 26 |
31-8M0146553 |
BEARING, Tapered Roller |
| 27 |
NSS |
NOT SOLD SEPARATE, Cup |
| 28 |
28-8M0204723 |
KEY |
| 29 |
15-42637A1 |
SHIM SET |
| 30 |
31-8M0146566 |
BEARING, Roller |
| 31 |
NSS |
NOT SOLD SEPARATE, Cup |
| 32 |
8245191 |
RETAINER |
| 33 |
8M0214948 |
CARRIER ASSEMBLY |
| 34 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 35 |
26-8M0214939 |
SEAL, Oil |
| 36 |
26-8M0214939 |
SEAL, Oil |
| 37 |
817275A1 |
PUMP ASSEMBLY, Water |
| 38 |
26-816575A2 |
SEAL KIT |
| 39 |
27-430331 |
GASKET |
| 40 |
27-8172771 |
GASKET |
| 41 |
8M0204709 |
FACEPLATE |
| 42 |
47-43026T2 |
IMPELLER |
| 43 |
10-1993716 |
SCREW, (M6 x 16) |
| 44 |
832942A1 |
COUPLING ASSEMBLY |
| 45 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 46 |
25-8M0204654 |
O-RING, (1.046) |
▶Gear Hsg(Propshaft) (C/R)(S/N-0G960499 & Below) (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic Comment: (BLACK) |
| 47 |
8M0226861 |
SHIFT CRANK |
| 48 |
8M0235940 |
SPOOL ASSEMBLY |
| 49 |
NSS |
NOT SOLD SEPARATE, Spool |
| 50 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 51 |
NSS |
NOT SOLD SEPARATE, Cotter Pin |
| 52 |
15-44491A1 |
SHIM SET |
| 53 |
828830A2 |
ADAPTOR ASSEMBLY, Bearing |
| 54 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 55 |
12-815481 |
THRUST WASHER |
| 56 |
31-815480 |
BEARING, Thrust |
| 57 |
43-828696T2 |
GEAR, Reverse (12/21) |
| 58 |
31-15844 |
BEARING ASSEMBLY, Roller |
| 59 |
24-30893 |
SPRING |
| 60 |
52-859340T |
CLUTCH |
| 61 |
17-8M0100263 |
PIN, Cross |
| 62 |
17-828356 |
PIN, Detent |
| 63 |
44-8M0140448 |
PROPELLER SHAFT |
| 64 |
43-828695A1 |
GEAR SET, Forward/Pinion (12/21) (INCLUDES PINION) |
| 65 |
23-1761526 |
SPACER SHIM, (.230) |
| 66 |
31-815480 |
BEARING, Thrust |
| 67 |
12-815481 |
THRUST WASHER |
| 68 |
828831A3 |
ADAPTOR ASSEMBLY, Bearing |
| 69 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 70 |
12-18448 |
THRUST WASHER |
| 71 |
31-15842 |
BEARING, Thrust |
| 72 |
8182911 |
RACE, Thrust |
| 73 |
814605 |
KEEPER |
| 74 |
25-8M0214920 |
O-RING |
| 75 |
818290T8 |
CARRIER ASSEMBLY, Bearing |
| 76 |
31-30956T |
BEARING, Needle |
| 77 |
26-14077 |
SEAL, Oil (INSIDE) |
| 78 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 79 |
14-18323 |
TAB WASHER |
| 80 |
8M2011027 |
RETAINER |
| 81 |
97-76214Q5 |
ANODE KIT |
| 82 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶Gear Hsg(Propshaft) (Std)(S/N-0G960499 & Below) (31 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic Comment: (BLACK) |
| 46 |
8M0226861 |
SHIFT CRANK |
| 47 |
8M0235940 |
SPOOL ASSEMBLY |
| 48 |
NSS |
NOT SOLD SEPARATE, Shift Spool |
| 49 |
NSS |
NOT SOLD SEPARATE, Cotter Pin |
| 50 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 51 |
15-44491A1 |
SHIM SET |
| 52 |
43-878611A2 |
GEAR SET, Forward/Pinion (INCLUDES PINION GEAR) Comment: (1.87:1 - 15/28) |
| 53 |
31-30894A1 |
BEARING SET, Cup And Cone |
| 54 |
NSS |
NOT SOLD SEPARATE, Cup |
| 55 |
53-856823 |
RING, Retaining |
| 56 |
31-30895T |
BEARING, Needle |
| 57 |
24-30893 |
SPRING |
| 58 |
52-859340T |
CLUTCH |
| 59 |
17-828356 |
PIN, Detent |
| 60 |
17-8M0100263 |
PIN, Cross |
| 61 |
44-8M0140440 |
PROPELLER SHAFT |
| 62 |
43-828171A1 |
GEAR, Reverse Comment: (1.87:1 - 15/28) |
| 63 |
23-824108 |
SPACER |
| 64 |
681001 |
RING, Thrust |
| 65 |
30-88957T |
BEARING, Ball |
| 66 |
25-8M0214920 |
O-RING |
| 67 |
818763T11 |
CARRIER ASSEMBLY, Bearing |
| 68 |
31-30956T |
BEARING, Needle |
| 69 |
26-14077 |
SEAL, Oil (INSIDE) |
| 70 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 71 |
14-18323 |
TAB WASHER |
| 72 |
8M2011027 |
RETAINER |
| 73 |
97-76214Q5 |
ANODE KIT |
| 74 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶Gear Hsg(Propshaft)(C/R)(S/N-0G960500 & Up) (39 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 48 |
22-859403 |
PLUG |
| 49 |
8M0226861 |
SHIFT CRANK |
| 50 |
8M0235940 |
SPOOL ASSEMBLY |
| 51 |
NSS |
NOT SOLD SEPARATE, Spool |
| 52 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 53 |
18-469501 |
COTTER PIN |
| 54 |
15-44491A1 |
SHIM SET |
| 55 |
828830A2 |
ADAPTOR ASSEMBLY, Bearing |
| 56 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 57 |
12-815481 |
THRUST WASHER |
| 58 |
31-815480 |
BEARING, Thrust |
| 59 |
43-828696T2 |
GEAR, Reverse (12/21) (1.75:1) |
| 60 |
31-15844 |
BEARING ASSEMBLY, Roller |
| 61 |
24-30893 |
SPRING |
| 62 |
52-859340T |
CLUTCH |
| 63 |
17-8M0100263 |
PIN, Cross |
| 64 |
17-828356 |
PIN, Detent |
| 65 |
44-8M0140448 |
PROPELLER SHAFT |
| 66 |
43-828695A1 |
GEAR SET, Forward/Pinion (12/21) (1.75:1) |
| 67 |
23-1761526 |
SPACER SHIM, (.230) |
| 68 |
31-815480 |
BEARING, Thrust |
| 69 |
12-815481 |
THRUST WASHER |
| 70 |
828831A3 |
ADAPTOR ASSEMBLY, Bearing |
| 71 |
31-814653T |
BEARING ASSEMBLY, Needle Rollers |
| 72 |
12-18448 |
THRUST WASHER |
| 73 |
31-15842 |
BEARING, Thrust |
| 74 |
8182911 |
RACE, Thrust |
| 75 |
814605 |
KEEPER |
| 76 |
25-8M0214920 |
O-RING |
| 77 |
818290T8 |
CARRIER ASSEMBLY, Bearing |
| 78 |
31-30956T |
BEARING, Needle |
| 79 |
26-14077 |
SEAL, Oil (INSIDE) |
| 80 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 81 |
14-18323 |
TAB WASHER |
| 82 |
8M2011027 |
RETAINER |
| 83 |
97-76214Q5 |
ANODE KIT |
| 84 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶Gear Hsg(Propshaft)(Std)(S/N-0G960500 & Up) (32 parts)
| Ref |
OEM Part # |
Part Name |
| - |
26-816575A4 |
SEAL KIT, Gear Housing |
| 1 |
1623-859399T18 |
GEAR HOUSING ASSEMBLY, Basic |
| 47 |
22-859403 |
PLUG |
| 48 |
8M0226861 |
SHIFT CRANK |
| 49 |
8M0235940 |
SPOOL ASSEMBLY |
| 50 |
NSS |
NOT SOLD SEPARATE, Shift Spool |
| 51 |
18-469501 |
COTTER PIN |
| 52 |
NSS |
NOT SOLD SEPARATE, Sleeve |
| 53 |
43-859321A3 |
GEAR SET, Forward/Pinion (12/21) (1.75:1) |
| 54 |
15-44491A1 |
SHIM SET |
| 55 |
31-30894A1 |
BEARING SET, Cup And Cone |
| 56 |
NSS |
NOT SOLD SEPARATE, Cup |
| 57 |
53-856823 |
RING, Retaining |
| 58 |
31-30895T |
BEARING, Needle |
| 59 |
24-30893 |
SPRING |
| 60 |
52-859340T |
CLUTCH |
| 61 |
17-828356 |
PIN, Detent |
| 62 |
17-8M0100263 |
PIN, Cross |
| 63 |
44-8M0140440 |
PROPELLER SHAFT |
| 64 |
43-859322A1 |
GEAR, Reverse (12/21) (1.75:1) |
| 65 |
23-824108 |
SPACER |
| 66 |
681001 |
RING, Thrust |
| 67 |
30-88957T |
BEARING, Ball |
| 68 |
25-8M0214920 |
O-RING |
| 69 |
818763T11 |
CARRIER ASSEMBLY, Bearing |
| 70 |
31-30956T |
BEARING, Needle |
| 71 |
26-14077 |
SEAL, Oil (INSIDE) |
| 72 |
26-8M0204670 |
SEAL (OUTSIDE) |
| 73 |
14-18323 |
TAB WASHER |
| 74 |
8M2011027 |
RETAINER |
| 75 |
97-76214Q5 |
ANODE KIT |
| 76 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
▶INSTRUMENTATION (13 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
87-19674A1 |
SWITCH ASSEMBLY, Lanyard |
| 2 |
10-18303 |
SCREW, (.190-16 x 1.750) Stainless Steel |
| 3 |
813679 |
ADAPTER |
| 4 |
15920Q54 |
LANYARD ASSEMBLY |
| 5 |
10-32866 |
SCREW, (#10-32 x 2.00) Stainless Steel |
| 6 |
18321 |
CLAMP, Mounting |
| 7 |
12-24676 |
WASHER, (.200 x .440 x .032) |
| 8 |
10-32,11-68219 |
NUT, Stainless Steel |
| 9 |
79146 |
RETAINER |
| 10 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 11 |
812497A2 |
DIODE ASSEMBLY |
| 12 |
84-11149A2 |
CABLE ASSEMBLY, (6.00 Inches) |
| 13 |
79-859697A1 |
TWO WARNING GAUGE |
▶Instrumentation (19 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
87-19674A1 |
SWITCH ASSEMBLY, Lanyard |
| 2 |
10-18303 |
SCREW, (.190-16 x 1.750) Stainless Steel |
| 3 |
813679 |
ADAPTER |
| 4 |
15920Q54 |
LANYARD ASSEMBLY |
| 5 |
10-32866 |
SCREW, (#10-32 x 2.00) Stainless Steel (10-32 X 2 IN.) |
| 6 |
18321 |
CLAMP, Mounting |
| 7 |
12-24676 |
WASHER, (.200 x .440 x .032) |
| 8 |
10-32,11-68219 |
NUT, Stainless Steel (10-32) |
| 9 |
79146 |
RETAINER |
| 10 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 11 |
812497A2 |
DIODE ASSEMBLY |
| 12 |
84-11149A2 |
CABLE ASSEMBLY, (6.00 Inches) (6 IN.) |
| 13 |
79-859698A1 |
WARNING GAUGE KIT |
| 14 |
850020 |
CLAMP |
| 15 |
8,13-825361 |
LOCKWASHER, Star |
| 16 |
8-32,11-26419 |
NUT, Brass |
| 17 |
88-15163 |
LAMP |
| 18 |
88-79888 |
SOCKET, Light Bulb |
| 19 |
84-827752A1 |
CABLE ASSEMBLY, (20.00 Feet) |
▶MISCELLANEOUS (1 parts)
| Ref |
OEM Part # |
Part Name |
| 0 |
37-804670A01 |
DECAL, EPA Label Information Comment: (2001) |
▶OIL INJECTION COMPONENTS (37 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
1270-830889A1 |
TANK ASSEMBLY, Oil Comment: SN# 0G960499 & Below |
| 2 |
1270-818456A1 |
TANK ASSEMBLY, Oil Comment: SN# 0G960500 & Up |
| 3 |
NSS |
NOT SOLD SEPARATE, Decal-Oil Tank |
| 4 |
23-8260841 |
SPACER |
| 5 |
10-58376 |
SCREW, (.164-18 x .375) |
| 6 |
12-72761 |
WASHER, (.203 x .562 x .060) Stainless Steel |
| 7 |
36-814449A3 |
CAP ASSEMBLY |
| 8 |
27-42999T |
GASKET |
| 9 |
87-12886A7 |
SWITCH ASSEMBLY |
| 10 |
NSS |
NOT SOLD SEPARATE, Cap |
| 11 |
23-19064 |
BUSHING |
| 12 |
25-825380001 |
GROMMET |
| 13 |
12-49436 |
WASHER |
| 14 |
10-81893435 |
SCREW, (M8 x 35) |
| 15 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) (8 IN.) Comment: SN# 0G960499 & Below |
| 16 |
22-8M0207780 |
FITTING |
| 17 |
10-82104530 |
SCREW (M5 X 30) |
| 18 |
815536T1 |
PUMP, Oil |
| 19 |
25-11379 |
O-RING |
| 20 |
25-48462 |
O-RING, (.614 x .070) |
| 21 |
23-817631 |
BEARING, Driven Gear |
| 22 |
43-430204 |
GEAR, Driven |
| 23 |
816974 |
BEARING, Thrust |
| 24 |
10-82104520 |
SCREW, (M5 x 20) (M5 X 20) |
| 25 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 26 |
32-82381455 |
TUBING, (25.00 Inches Bulk) (8-3/4 IN.) |
| 27 |
1257-87421 |
TANK |
| 28 |
36-43298A2 |
CAP ASSEMBLY |
| 29 |
NSS |
NOT SOLD SEPARATE, Insert |
| 30 |
25-11332 |
O-RING, (2.225 x .210) |
| 31 |
816190A4 |
HOUSING ASSEMBLY, Adapter |
| 32 |
25-11332 |
O-RING, (2.225 x .210) |
| 33 |
32-99802 |
TUBE |
| 34 |
32-99439 |
HOSE, (114.00 Inches) |
| 35 |
12335A1 |
BRACKET KIT |
| 36 |
12323A1 |
CORD/HOOK KIT |
| 37 |
NSS |
NOT SOLD SEPARATE, Decal-Caution Remote Tank |
▶Oil Injection Components (41 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
1270-830889A1 |
TANK ASSEMBLY, Oil Comment: SN# 0G960499 & Below |
| 2 |
1270-818456A1 |
TANK ASSEMBLY, Oil Comment: SN# 0G960500 & Up |
| 3 |
23-8260841 |
SPACER |
| 4 |
10-58376 |
SCREW, (.164-18 x .375) |
| 5 |
12-72761 |
WASHER, (.203 x .562 x .060) Stainless Steel |
| 6 |
NSS |
NOT SOLD SEPARATE, Decal-Oil Tank |
| 7 |
36-814449A3 |
CAP ASSEMBLY |
| 8 |
27-42999T |
GASKET |
| 9 |
87-12886A7 |
SWITCH ASSEMBLY |
| 10 |
23-19064 |
BUSHING |
| 11 |
25-825380001 |
GROMMET |
| 12 |
12-49436 |
WASHER |
| 13 |
10-81893435 |
SCREW, (M8 x 35) |
| 14 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk) Comment: (10 Inches) SN# 0G960500 & Up |
| 15 |
22-8M0207780 |
FITTING |
| 16 |
10-82104530 |
SCREW (M5 X 30) |
| 17 |
815536T1 |
PUMP, Oil |
| 18 |
25-11379 |
O-RING |
| 19 |
25-48462 |
O-RING, (.614 x .070) |
| 20 |
23-817631 |
BEARING, Driven Gear |
| 21 |
43-430204 |
GEAR, Driven |
| 22 |
816974 |
BEARING, Thrust |
| 23 |
10-82104520 |
SCREW, (M5 x 20) (M5 X 20) |
| 24 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 25 |
32-82381455 |
TUBING, (25.00 Inches Bulk) (8-3/4 IN.) |
| 26 |
32-82381335 |
TUBING, (15.00 Inches Bulk) (7 IN.) |
| 27 |
1257-87421 |
TANK |
| 28 |
36-43298A2 |
CAP ASSEMBLY |
| 29 |
NSS |
NOT SOLD SEPARATE, Insert |
| 30 |
25-11332 |
O-RING, (2.225 x .210) |
| 31 |
816190A4 |
SENDER ASSEMBLY, Oil Level |
| 32 |
25-11332 |
O-RING, (2.225 x .210) |
| 33 |
32-99802 |
TUBE |
| 34 |
32-99439 |
HOSE, (114.00 Inches) |
| 35 |
12335A1 |
BRACKET KIT |
| 36 |
12323A1 |
CORD/HOOK KIT |
| 37 |
NSS |
NOT SOLD SEPARATE, Decal-Caution Remote Tank |
| 38 |
32-858853 |
HOSE |
| 39 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 40 |
22-858955 |
CONNECTOR |
| 41 |
NSS |
NOT SOLD SEPARATE, Cap |
▶POWER TRIM COMPONENTS(CAST PUMP HOUSING) (36 parts)
| Ref |
OEM Part # |
Part Name |
| - |
855998A11 |
POWER TRIM, Complete |
| 1 |
878265A4 |
MOTOR KIT |
| 2 |
878405A1 |
ARMATURE |
| 3 |
878407A1 |
END FRAME |
| 4 |
10-82494830 |
SCREW, (M6 x 30) |
| 5 |
13-400256 |
LOCKWASHER, (M6) |
| 6 |
8782451 |
COUPLING |
| 7 |
878410A1 |
PO CHECK KIT |
| 8 |
893929A01 |
MANUAL RELEASE ASSEMBLY |
| 9 |
8M0142997 |
SHAFT KIT Comment: (Incls. Ref. #26) |
| 10 |
17-878267 |
PIN |
| 11 |
878235A03 |
TILT CYLINDER ASSEMBLY |
| 12 |
878239A02 |
GUIDE KIT Comment: (Incls. Ref. #26) |
| 13 |
8M0142999 |
O-RING KIT Comment: (Incls. Ref. #26) |
| 14 |
8M0168219 |
SHOCK ROD KIT Comment: (Incls. Ref. #26) |
| 15 |
8M0143000 |
PISTON ASSEMBLY, Memory |
| 16 |
878406A02 |
REPAIR KIT, Check Valve Comment: (Incls. Ref. #26) |
| 17 |
878414T01 |
PISTON ASSEMBLY |
| 18 |
878413A1 |
PISTON ASSEMBLY |
| 19 |
1100-8M0021648 |
GUIDE ASSEMBLY |
| 20 |
878264A1 |
RESERVOIR KIT |
| 21 |
19-811613 |
PLUG ASSEMBLY |
| 22 |
10-4000327 |
SCREW, (M6 x 14) |
| 23 |
12-4002315 |
WASHER |
| 24 |
892251A01 |
PUMP KIT |
| 25 |
878408A1 |
REPAIR KIT, Power Trim |
| 26 |
17-821539 |
PIN, Trilobe |
| 27 |
10-858771 |
SCREW, (M10 x 30) |
| 28 |
12-4002319 |
WASHER |
| 29 |
97-818298Q1 |
ANODE KIT |
| 30 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 31 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 32 |
99625002 |
SHAFT |
| 33 |
8M0084613 |
C WASHER |
| 34 |
54-22875 |
CLIP |
| 35 |
10-878609 |
SCREW, (#10-16 x .600) |
▶POWER TRIM COMPONENTS(REMOVABLE PUMP HOUSING) (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
855998A11 |
POWER TRIM ASSEMBLY, Complete |
| 1 |
811604F |
MANIFOLD ASSEMBLY |
| 2 |
22-56800 |
PLUG, Pipe (.0625-27) |
| 3 |
880952A03 |
CYLINDER ASSEMBLY |
| 4 |
823553T |
ROD, Trim Piston |
| 5 |
878239A02 |
GUIDE KIT |
| 6 |
811607A1 |
REPAIR KIT |
| 7 |
811610A1 |
CHECK VALVE KIT |
| 8 |
1100-8M0021648 |
GUIDE ASSEMBLY |
| 9 |
878414T01 |
PISTON ASSEMBLY, Power Trim Comment: (STBD.) |
| 10 |
35-12184A1 |
TRIM FILTER ASSEMBLY |
| 11 |
893929A01 |
MANUAL RELEASE ASSEMBLY |
| 12 |
53-815949001 |
E RING |
| 13 |
811612A3 |
O-RING KIT |
| 14 |
811617T1 |
PUMP |
| 15 |
19-811613 |
PLUG ASSEMBLY |
| 16 |
10-4000327 |
SCREW, (M6 x 14) |
| 17 |
12-4002315 |
WASHER |
| 18 |
811611 |
COVER |
| 19 |
828710 |
DRIVE JOINT |
| 20 |
878265A4 |
TRIM MOTOR Comment: (BREAKDOWN ON POWER TRIM MOTOR) |
| 21 |
10-811616 |
SCREW Comment: (SHORT) |
| 22 |
8M0142997 |
SHAFT ASSEMBLY |
| 23 |
22-56800 |
PLUG, Pipe (.0625-27) |
| 24 |
17-878267 |
PIN, Groove |
| 25 |
17-821539 |
PIN, Trilobe |
| 26 |
99625002 |
SHAFT |
| 27 |
97-818298Q1 |
ANODE KIT |
| 28 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 29 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 30 |
10-4000377 |
SCREW, (M10 x 30) |
| 31 |
12-4002319 |
WASHER |
| 32 |
54-26550 |
CLAMP |
| 33 |
10-878609 |
SCREW, (#10-16 x .600) |
| 34 |
8M0084613 |
C WASHER |
| 35 |
37-435301 |
DECAL, Caution-Power Trim |
| 36 |
32-828547353 |
CONDUIT, (.350 Inside Diameter x 3.00 Feet Bulk) |
| 37 |
54-816311T |
TIE STRAP, (8.00 Inches) |
▶POWER TRIM MOTOR(REMOVABLE PUMP HOUSING) (4 parts)
| Ref |
OEM Part # |
Part Name |
| - |
878265A4 |
TRIM MOTOR |
| 1 |
828714A1 |
BRUSH AND SEAL KIT |
| 2 |
828713T1 |
ARMATURE KIT |
| 3 |
828715A1 |
END FRAME (COMPLETE) |
▶Power Trim Components(Cast Pump Housing) (36 parts)
| Ref |
OEM Part # |
Part Name |
| - |
855998A11 |
POWER TRIM, Complete |
| 1 |
878265A4 |
TRIM MOTOR |
| 2 |
NSS |
NOT SOLD SEPARATE, Armature |
| 3 |
NSS |
NOT SOLD SEPARATE, End Frame |
| 4 |
10-82494830 |
SCREW, (M6 x 30) |
| 5 |
13-400256 |
LOCKWASHER, (M6) |
| 6 |
8782451 |
COUPLING |
| 7 |
878410A1 |
PO CHECK KIT |
| 8 |
893929A01 |
MANUAL RELEASE ASSEMBLY |
| 9 |
8M0142997 |
SHAFT KIT Comment: (Incls. Ref. #26) |
| 10 |
17-878267 |
PIN |
| 11 |
878235A03 |
TILT CYLINDER ASSEMBLY |
| 12 |
878239A02 |
GUIDE KIT Comment: (Incls. Ref. #26) |
| 13 |
8M0142999 |
O-RING KIT Comment: (Incls. Ref. #26) |
| 14 |
8M0168219 |
SHOCK ROD KIT Comment: (Incls. Ref. #26) |
| 15 |
8M0143000 |
PISTON ASSEMBLY, Memory |
| 16 |
878406A02 |
REPAIR KIT, Check Valve Comment: (Incls. Ref. #26) |
| 17 |
878414T01 |
PISTON ASSEMBLY |
| 18 |
878413A1 |
PISTON ASSEMBLY |
| 19 |
1100-8M0021648 |
GUIDE ASSEMBLY |
| 20 |
878264A1 |
RESERVOIR KIT |
| 21 |
19-811613 |
PLUG ASSEMBLY |
| 22 |
10-4000327 |
SCREW, (M6 x 14) |
| 23 |
12-4002315 |
WASHER |
| 24 |
892251A01 |
PUMP KIT |
| 25 |
878408A1 |
REPAIR KIT, Power Trim |
| 26 |
17-821539 |
PIN, Trilobe |
| 27 |
10-858771 |
SCREW, (M10 x 30) |
| 28 |
12-4002319 |
WASHER |
| 29 |
97-818298Q1 |
ANODE KIT |
| 30 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 31 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 32 |
99625002 |
SHAFT |
| 33 |
8M0084613 |
C WASHER |
| 34 |
54-26550 |
CLAMP |
| 35 |
10-878609 |
SCREW, (#10-16 x .600) |
▶Power Trim Components(Removable Pump Housing) (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
855998A11 |
POWER TRIM ASSEMBLY, Complete |
| 1 |
811604F |
MANIFOLD ASSEMBLY |
| 2 |
22-56800 |
PLUG, Pipe (.0625-27) |
| 3 |
880952A03 |
CYLINDER ASSEMBLY, Tilt |
| 4 |
823553T |
ROD, Trim Piston |
| 5 |
878239A02 |
GUIDE KIT |
| 6 |
811607A1 |
REPAIR KIT |
| 7 |
811610A1 |
CHECK VALVE KIT |
| 8 |
1100-8M0021648 |
GUIDE ASSEMBLY |
| 9 |
878414T01 |
PISTON ASSEMBLY Comment: (STBD.) |
| 10 |
35-12184A1 |
TRIM FILTER ASSEMBLY |
| 11 |
893929A01 |
MANUAL RELEASE ASSEMBLY |
| 12 |
53-815949001 |
E RING |
| 13 |
811612A3 |
O-RING KIT |
| 14 |
811617T1 |
PUMP |
| 15 |
19-811613 |
PLUG ASSEMBLY |
| 16 |
10-4000327 |
SCREW, (M6 x 14) |
| 17 |
12-4002315 |
WASHER |
| 18 |
811611 |
COVER |
| 19 |
828710 |
DRIVE JOINT |
| 20 |
878265A4 |
TRIM MOTOR Comment: (BREAKDOWN ON POWER TRIM MOTOR ) |
| 21 |
10-811616 |
SCREW Comment: (SHORT) |
| 22 |
8M0142997 |
SHAFT ASSEMBLY |
| 23 |
22-56800 |
PLUG, Pipe (.0625-27) |
| 24 |
17-878267 |
PIN, Groove |
| 25 |
17-821539 |
PIN, Trilobe |
| 26 |
99625002 |
SHAFT |
| 27 |
97-818298Q1 |
ANODE KIT |
| 28 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 29 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 30 |
10-4000377 |
SCREW, (M10 x 30) |
| 31 |
12-4002319 |
WASHER |
| 32 |
54-26550 |
CLAMP |
| 33 |
10-878609 |
SCREW, (#10-16 x .600) |
| 34 |
8M0084613 |
C WASHER |
| 35 |
37-435301 |
DECAL, Caution-Power Trim |
| 36 |
32-828547353 |
CONDUIT, (.350 Inside Diameter x 3.00 Feet Bulk) |
| 37 |
54-816311T |
TIE STRAP, (8.00 Inches) |
▶Power Trim Motor(Removable Pump Housing) (4 parts)
| Ref |
OEM Part # |
Part Name |
| - |
878265A4 |
TRIM MOTOR |
| 1 |
828714A1 |
BRUSH AND SEAL KIT |
| 2 |
828713T1 |
ARMATURE KIT |
| 3 |
828715A1 |
END FRAME (COMPLETE) |
▶REED BLOCK/SOUND ATTENUATOR (23 parts)
| Ref |
OEM Part # |
Part Name |
| - |
809793A00 |
POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 |
8184441 |
ATTENUATOR, Sound |
| 2 |
8215542 |
PLATE, Sound Attenuator |
| 3 |
8266151 |
SEAL |
| 4 |
10-82130020 |
SCREW, (M6 x 20) |
| 5 |
8161843 |
PLATE, Carburetor Adaptor |
| 6 |
827507 |
RETAINER |
| 7 |
16-8165712 |
STUD (M6 X 29.50) |
| 8 |
10-82130025 |
SCREW, (M6 x 25) |
| 9 |
27-8141951 |
GASKET |
| 10 |
828623T4 |
REED BLOCK Comment: SN# 0G960500 & Up |
| 11 |
10-4007420 |
SCREW, (M6 x 20) |
| 12 |
822520 |
LATCH HANDLE |
| 13 |
10-48408 |
SCREW, (#10-16 x .500) |
| 14 |
12-8M0204666 |
WASHER, (.203 x .500 x .032) |
| 15 |
822527 |
PAWL |
| 16 |
818446 |
FLYWHEEL COVER |
| 17 |
25-8M0153609 |
GROMMET |
| 18 |
37-804670A01 |
DECAL, EPA Label Information Comment: (2001) |
| 19 |
NSS |
NOT SOLD SEPARATE, Decal-Timing |
| 20 |
NSS |
NOT SOLD SEPARATE, Decal-Caution-In Gear |
| 21 |
37-881865 |
DECAL, Caution, Start In Gear |
| 22 |
NSS |
NOT SOLD SEPARATE, Decal-Caution-Airbox |
▶Reed Block/Flywheel Cover (12 parts)
| Ref |
OEM Part # |
Part Name |
| - |
804800A00 |
POWERHEAD ASSEMBLY Comment: (250) SN# 0G960500 & Up |
| 1 |
54-49542 |
CLAMP |
| 2 |
27-825815 |
GASKET |
| 3 |
10-82130012 |
SCREW, (M6 x 12) |
| 4 |
825178T5 |
ADAPTOR PLATE |
| 5 |
827507 |
RETAINER |
| 6 |
10-82130025 |
SCREW, (M6 x 25) |
| 7 |
27-8141951 |
GASKET |
| 8 |
828623T4 |
REED BLOCK Comment: SN# 0G960500 & Up |
| 9 |
10-4007420 |
SCREW, (M6 x 20) |
| 10 |
825832 |
FLYWHEEL COVER |
| 11 |
25-8M0153609 |
GROMMET |
▶SWIVEL BRACKET AND STEERING ARM (37 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
1499-8M0102865 |
SWIVEL BRACKET ASSEMBLY, Black |
| 2 |
25-8M0214926 |
O-RING |
| 3 |
23-818764 |
BUSHING |
| 4 |
23-816039 |
SPACER |
| 5 |
26-87735 |
SEAL, Oil (LOWER) |
| 6 |
22-8M0169589 |
FITTING, Grease |
| 7 |
23-821207 |
BUSHING |
| 8 |
12-816432 |
THRUST WASHER |
| 9 |
826364T |
YOKE, Bottom Comment: (XL/XXL-STAINLESS STEEL) |
| 10 |
53-67684 |
RING, Retaining |
| 11 |
8M0045383 |
STRIKER PLATE |
| 12 |
13-58643 |
LOCKWASHER, (.375) |
| 13 |
11-46335 |
NUT, (.375-24) |
| 14 |
10-64014 |
SCREW, (.250-28 x .500) |
| 15 |
8M0074846 |
SENDER ASSEMBLY, Trim |
| 16 |
10-852368 |
SCREW, (#10-24 x .750) |
| 17 |
10,13-26996 |
LOCKWASHER, Stainless Steel |
| 18 |
12-89302 |
WASHER, (.203 x .406 x .040) |
| 19 |
17-8M0132731 |
SWIVEL PIN ASSEMBLY, Steering Arm - Stainless Steel Comment: (XL/XXL-STAINLESS STEEL) |
| 20 |
10-8M0141069 |
SCREW, (M12 x 190) |
| 21 |
824998001 |
BUMPER |
| 22 |
8163851 |
MOUNT, Upper |
| 23 |
12-8154371 |
WASHER |
| 24 |
12-815436 |
WASHER |
| 25 |
11-896963 |
NUT, (M12) |
| 26 |
8M0036783 |
CLAMP |
| 27 |
10-81893435 |
SCREW, (M8 x 35) |
| 28 |
92876A12 |
LINK ROD ASSEMBLY |
| 29 |
10-849838 |
SCREW, (.375-24 x 1.25) |
| 30 |
11-8M0204726 |
NUT, (.375-24) |
| 31 |
12-37828 |
WASHER, (.390 x .625 x .062) Stainless Steel |
| 32 |
NSS |
NOT SOLD SEPARATE, Decal-Serial Overlaminate |
| 33 |
22-859732 |
PLUG |
| 34 |
22-8M0214970 |
FITTING, Adapter |
| 35 |
22-859448T |
FITTING |
| 36 |
25-8M0153609 |
GROMMET |
| 37 |
54-850181 |
TIE STRAP, (11.750 Inches) |
▶Service/Support Material (1 parts)
| Ref |
OEM Part # |
Part Name |
| 0 |
37-804670A01 |
DECAL, EPA Label Information Comment: (2001) |
▶Starter Motor (17 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
50-898265009 |
STARTER MOTOR ASSEMBLY |
| 2 |
8236392 |
DRIVE CAP |
| 3 |
10-823641 |
THRU BOLT |
| 4 |
823640T |
DRIVE KIT |
| 5 |
13310T1 |
PINION ASSEMBLY |
| 6 |
823638 |
ARMATURE |
| 7 |
898265016 |
BRUSH/SPRING KIT |
| 8 |
898265014 |
HOLDER |
| 9 |
8119011 |
CAP, Commutator |
| 10 |
F15158 |
SCREW |
| 11 |
37-8272822 |
DECAL, Warning, High Voltage |
| 12 |
13-26992 |
LOCKWASHER, (.250) Stainless Steel |
| 13 |
11-94330 |
NUT, (.250-20) Brass |
| 14 |
13-26992 |
LOCKWASHER, (.250) Stainless Steel |
| 15 |
11-20890 |
NUT, (.250-20) |
| 16 |
10-81893450 |
SCREW, (M8 x 50) |
| 17 |
23-824921 |
SPACER |
▶Swivel Bracket and Steering Arm (37 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
1499-8M0102865 |
SWIVEL BRACKET ASSEMBLY, Black Comment: (BLACK) |
| 2 |
25-8M0214926 |
O-RING |
| 3 |
23-818764 |
BUSHING |
| 4 |
23-816039 |
SPACER |
| 5 |
26-87735 |
SEAL, Oil (LOWER) |
| 6 |
22-8M0169589 |
FITTING, Grease |
| 7 |
23-821207 |
BUSHING |
| 8 |
12-816432 |
THRUST WASHER |
| 9 |
826364T |
YOKE, Bottom Comment: (BLACK-XL/XXL-STAINLESS STEEL) |
| 10 |
53-67684 |
RING, Retaining |
| 11 |
8M0045383 |
STRIKER PLATE |
| 12 |
13-58643 |
LOCKWASHER, (.375) |
| 13 |
11-46335 |
NUT, (.375-24) |
| 14 |
10-64014 |
SCREW, (.250-28 x .500) |
| 15 |
8M0074846 |
SENDER ASSEMBLY, Trim |
| 16 |
10-852368 |
SCREW, (#10-24 x .750) |
| 17 |
10,13-26996 |
LOCKWASHER, Stainless Steel |
| 18 |
12-89302 |
WASHER, (.203 x .406 x .040) |
| 19 |
17-8M0132731 |
SWIVEL PIN ASSEMBLY, Steering Arm - Stainless Steel Comment: (XL/XXL-STAINLESS STEEL) |
| 20 |
10-8M0141069 |
SCREW, (M12 x 190) |
| 21 |
824998001 |
BUMPER |
| 22 |
8163851 |
MOUNT, Upper |
| 23 |
12-8154371 |
WASHER |
| 24 |
12-815436 |
WASHER |
| 25 |
11-896963 |
NUT, (M12) |
| 26 |
8M0036783 |
CLAMP |
| 27 |
10-81893435 |
SCREW, (M8 x 35) |
| 28 |
92876A12 |
LINK ROD ASSEMBLY |
| 29 |
10-849838 |
SCREW, (.375-24 x 1.250) |
| 30 |
11-8M0204726 |
NUT, (.375-24) Stainless Steel |
| 31 |
12-37828 |
WASHER, (.390 x .625 x .062) Stainless Steel |
| 32 |
NSS |
NOT SOLD SEPARATE, Decal-Serial Overlaminate |
| 33 |
22-859732 |
PLUG |
| 34 |
22-8M0214970 |
FITTING, Adapter |
| 35 |
22-859448T |
FITTING |
| 36 |
25-8M0153609 |
GROMMET |
| 37 |
54-850181 |
TIE STRAP, (11.750 Inches) |
▶TOOLS, SPECIAL (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
91-63209 |
HEAT LAMP Comment: TRIM/TILT SYSTEM |
▶TOP COWL (21 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
4001-814277T15 |
TOP COWL ASSEMBLY Comment: (SILVER) |
| 2 |
821256T2 |
INLET, Air Comment: (SILVER) |
| 3 |
10-82130016 |
SCREW, (M6 x 16) |
| 4 |
821250A1 |
SOUND BLANKET KIT |
| 5 |
NSS |
NOT SOLD SEPARATE, Sound Blanket (SIDE) |
| 6 |
10-83002430 |
SCREW (M6 X 30) Comment: (SEAPRO/MARATHON) |
| 7 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel Comment: (SEAPRO/MARATHON) |
| 8 |
19-823865 |
CAP PLUG |
| 9 |
821248 |
REAR LATCH HOOK |
| 10 |
53-8237951 |
RING, Retaining |
| 11 |
8M0207770 |
ROLLER |
| 12 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 13 |
11-401366 |
NUT, (M6) Stainless Steel |
| 14 |
8M0036792 |
BRACKET, Front |
| 15 |
815477 |
BUMPER, Latch |
| 16 |
8155381 |
PIN, Roll |
| 17 |
11-401366 |
NUT, (M6) Stainless Steel |
| 18 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 19 |
826639T |
COVER |
| 20 |
47341A11 |
ROPE AND HANDLE KIT, Manual Starting |
| 21 |
NSS |
NOT SOLD SEPARATE, Decal-Break-In |
▶Tools-Special (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
91-821571A1 |
GUIDE TOOL, Water Pump Alignment Pins (GEAR HOUSING) |
▶Top Cowl (19 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
4001-814277T15 |
TOP COWL ASSEMBLY Comment: (SILVER) |
| 2 |
821256T2 |
INLET, Air - Silver Comment: (SILVER) |
| 3 |
10-82130016 |
SCREW, (M6 x 16) |
| 4 |
821250A1 |
SOUND BLANKET KIT |
| 5 |
NSS |
NOT SOLD SEPARATE, Sound Blanket (SIDE) |
| 6 |
19-823865 |
CAP PLUG |
| 7 |
821248 |
REAR LATCH HOOK |
| 8 |
53-8237951 |
RING, Retaining |
| 9 |
8M0207770 |
ROLLER |
| 10 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 11 |
11-401366 |
NUT, (M6) Stainless Steel |
| 12 |
8M0036792 |
BRACKET, Front |
| 13 |
815477 |
BUMPER, Latch |
| 14 |
8155381 |
PIN, Roll |
| 15 |
11-401366 |
NUT, (M6) Stainless Steel |
| 16 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 17 |
826639T |
COVER |
| 18 |
47341A11 |
ROPE AND HANDLE KIT, Manual Starting |
| 19 |
NSS |
NOT SOLD SEPARATE, Decal-Break-In |
▶Transom Brackets (22 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
3426-828334T03 |
BRACKET ASSEMBLY, Transom-Starboard |
| 2 |
3425-828333T08 |
BRACKET ASSEMBLY, Transom-Port |
| 3 |
22-8M0169588 |
FITTING, Grease (PORT) |
| 4 |
826125A1 |
TILT TUBE |
| 5 |
11-826135 |
NUT, (1.00-14) Brass/Nickel Plate |
| 6 |
25-45711 |
O-RING, (.612 x .103) |
| 7 |
13-88750 |
WASHER |
| 8 |
11-826164 |
NUT, (.875-14) |
| 9 |
10-8M0149747 |
SCREW, (.500-20 x 4.500) |
| 10 |
12-8M0204665 |
WASHER, (.530 x .870 x .105) Stainless Steel |
| 11 |
12-8M0204648 |
WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 12 |
11-82671117 |
NUT, (.500-20) |
| 13 |
8M0115104 |
LEVER ASSEMBLY, Tilt Lock |
| 14 |
24-830899 |
SPRING, Tension |
| 15 |
23-65830 |
NYLINER |
| 16 |
24-830900 |
SPRING, Compression |
| 17 |
99633 |
KNOB |
| 18 |
17-99615 |
PIN, Groove |
| 19 |
17-893709 |
PIN |
| 20 |
10-96930A1 |
BOLT ASSEMBLY |
| 21 |
12-25909 |
WASHER, (.406 x .812 x .065) |
| 22 |
11-23161 |
NUT, (.375-24) |
▶Vapor Seperator Components (34 parts)
| Ref |
OEM Part # |
Part Name |
| - |
825818A12 |
MANAGEMENT ASSEMBLY, Fuel Comment: (225 - 2 Shutter) SN# 0G960499 & Below |
| 1 |
8140111 |
BODY KIT |
| 2 |
10-809091 |
SCREW KIT |
| 3 |
809086 |
O-RING |
| 4 |
21-424811 |
VALVE |
| 5 |
809092 |
SCREW KIT, Mounting |
| 6 |
10-809061 |
BOLT |
| 7 |
13-400256 |
LOCKWASHER |
| 8 |
12-8090621 |
WASHER |
| 9 |
12-8090622 |
WASHER |
| 10 |
25-88033 |
GROMMET |
| 11 |
23-809078 |
COLLAR |
| 12 |
15445 |
FLOAT KIT |
| 13 |
15446 |
VALVE KIT, Float |
| 14 |
8140101 |
COVER |
| 15 |
22-809085 |
ELBOW KIT |
| 16 |
10-8140761 |
SCREW KIT |
| 17 |
809090 |
CONNECTION KIT, Electrical |
| 18 |
32-897992A01 |
TUBING KIT |
| 19 |
809087 |
ATTACHING KIT |
| 20 |
814012T1 |
REGULATOR KIT, Fuel Pressure |
| 21 |
809088T |
PUMP KIT, Fuel |
| 22 |
808504T1 |
STRAINER KIT |
| 23 |
809089 |
FITTING KIT, Fuel Pump |
| 24 |
150291 |
O-RING KIT |
| 25 |
11-8237515 |
NUT, (M4) |
| 26 |
11-400211 |
NUT, (M5) Stainless Steel |
| 27 |
8,13-26995 |
LOCKWASHER, Stainless Steel |
| 28 |
825762 |
SENSOR, MAP |
| 29 |
10-82130012 |
SCREW, (M6 x 12) |
| 30 |
22-15026 |
CAP |
| 31 |
37-804670A01 |
DECAL, EPA Label Information Comment: (2001) |
| 32 |
NSS |
NOT SOLD SEPARATE, Decal-Caustion In-Gear Idle |
| 33 |
37-881865 |
DECAL, Caution, Start In Gear |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 225 (3.0L EFI) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
-
Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
-
Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
