Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
OEM and aftermarket replacement parts for Mercury 1150. Scroll down for exploded parts diagrams (28), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 1150 Reference Library — Exploded parts diagrams (28 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 1150 is a 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve outboard motor. Powers center-console boats, larger pontoons, and offshore-capable fishing craft.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve |
| Horsepower | 115 HP |
| Displacement | 2100 cc (2.1L) |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK SILZKR7B11 |
| Engine Oil Capacity | 5.0 L (5.28 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | 24 fl oz (710 mL) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 1150:
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 1150.
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-8963A1 | COWL, BOTTOM Comment: SN# USA-4394237/Canada-7075523 & Up |
| 2 | 52862A2 | DRIP TRAY ASSEMBLY, BOTTOM COWL |
| 3 | 37940 | SOUND PAD |
| 4 | 10-48408 | SCREW, (#10-16 x .500) |
| 5 | 32-8M0108355 | HOSE (8") |
| 6 | 39616 | BOOT, CONTROL CABLES - BOTTOM COWL |
| 7 | 76369 | SPACER, BOTTOM COWL (COWL FRONT COVER) |
| 8 | 10-48591 | SCREW, (#10-32 x .500) |
| 9 | 37637 | BOOT, FUEL CONNECTOR |
| 10 | 37445 | SUPPORT, WIRING HARNESS |
| 11 | 10-69029 | SCREW, (.250-28 x 1.750) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 12 | 11-8M0207775 | NUT, (1/4-28) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 13 | 32-8M0108355 | HOSE, TELL TALE - (16") |
| 14 | 52889 | NOZZLE, TELL TALE HOSE TO BOTTOM COWL |
| 15 | 10-48408 | SCREW, (#10-16 x .500) |
| 16 | 22-996642 | ELBOW, TELL TALE HOSE TO EXHAUST COVER |
| 17 | 60304A54 | SHIFT SHAFT ASSEMBLY, UPPER Comment: (LONG SHAFT) SN# USA-4567952/Canada-7087423 & Up |
| 18 | 23-26600 | BUSHING, SHIFT SHAFT |
| 19 | 93960A1 | COUPLING, SHIFT SHAFT Comment: SN# USA-4567951/Australia-8027439/Canada-7087422 & Below |
| 20 | 73402 | LINK ROD ASSEMBLY |
| 21 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 22 | 11-826709109 | NUT, (.250-28) |
| 23 | 13-29720 | WAVE WASHER, LINK ROD |
| 24 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES |
| 25 | 39519 | CUP, BARREL RETIANER |
| 26 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING |
| 27 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING |
| 28 | 39667 | COVER, NYLON - SHIFT CABLE |
| 29 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 30 | 10-35386 | SCREW, (.312-18 x 1.00) |
| 31 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 32 | 37896 | GUIDE BLOCK, LINK ROD |
| 33 | 52100 | WEAR PLATE, LINK ROD |
| 34 | 8M0036768 | LATCH, CONTROL CABLE FASTENING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1352-4510A24 | CARBURETOR ASSEMBLY (WMK-10) |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 3 | NSS | NOT SOLD SEPARATE, PIN, FLOAT LEVER PINION |
| 4 | NSS | NOT SOLD SEPARATE, LEVER, FLOAT (LOWER) |
| 5 | NSS | NOT SOLD SEPARATE, LEVER, FLOAT (UPPER) |
| 6 | 1395-83181 | NEEDLE, Inlet, SEAT AND GASKET |
| 7 | NSS | NOT SOLD SEPARATE, GASKET, INLET SEAT |
| 8 | NSS | NOT SOLD SEPARATE, GASKET, FLOAT BOWL COVER |
| 9 | 1399-4559 | COVER, FLOAT BOWL |
| 10 | 10-52195 | SCREW, FLOAT BOWL COVER (SHORT) |
| 11 | 10-52196 | SCREW, FLOAT BOWL COVER (LONG) |
| 12 | 8,13-26995 | LOCKWASHER, Stainless Steel, FLOAT BOWL COVER SCREW |
| 13 | 27-25851 | GASKET, STRAINGER COVER (LARGE) |
| 14 | 1399-3938 | SCREEN, FILTER |
| 15 | 27-25849 | GASKET, STRAINER COVER (SMALL) |
| 16 | 1399-4791A1 | COVER, STRAINTER |
| 17 | NSS | NOT SOLD SEPARATE, GASKET, STRAINER COVER SCREW |
| 18 | 10-25822 | SCREW, STRAINER COVER FASTENING |
| 19 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 20 | 52518 | CLUSTER Comment: Upper CARBURETOR |
| 21 | 1395-7942 | SHAFT, THROTTLE |
| 22 | NSS | NOT SOLD SEPARATE, TUBE, IDLE |
| 23 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 24 | NSS | NOT SOLD SEPARATE, SCREW, THROTTLE SHUTTER |
| 25 | 1395-5108 | SHUTTER, THROTTLE |
| 26 | NSS | NOT SOLD SEPARATE, SPRING, IDLE ADJUSTMENT SCREW |
| 27 | 1399-3515 | SCREW, IDLE ADJUSTMENT |
| 28 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 29 | NSS | NOT SOLD SEPARATE, GASKET, JET CHANNEL PLUG SCREW |
| 30 | 1395-6029 | JET, Main Fuel (.068) |
| 31 | NSS | NOT SOLD SEPARATE, NOZZLE, MAIN |
| 32 | 1395-4542 | SCREW, PLUG - MAIN NOZZLE |
| 33 | NSS | NOT SOLD SEPARATE, SPRING, THROTTLE SHAFT RETURN |
| 34 | NSS | NOT SOLD SEPARATE, PLUG, BODY CHANNEL |
| 35 | 1395-4543 | SCREW |
| 36 | 27-481641 | GASKET, CARBURETOR FLANGE |
| 37 | 11-29250 | NUT, (5/16-24) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 52106A1 | VENTURI, Plastic |
| 1 | 1368-5702A19 | CARBURETOR ASSEMBLY Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 3 | NSS | NOT SOLD SEPARATE, PIN, FLOAT LEVER PINION |
| 4 | NSS | NOT SOLD SEPARATE, LEVER, FLOAT (LOWER) |
| 5 | NSS | NOT SOLD SEPARATE, LEVER, FLOAT (UPPER) |
| 6 | 1395-83181 | NEEDLE, Inlet, SEAT AND GASKET Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 7 | NSS | NOT SOLD SEPARATE, GASKET, INLET SEAT |
| 8 | NSS | NOT SOLD SEPARATE, GASKET, FLOAT BOWL COVER |
| 9 | 1395-5261 | COVER, FLOAT BOWL Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 THRU USA-4112634/Australia-8027114/Canada-7047257 |
| 10 | 1395-5680 | COVER, FLOAT BOWL Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 11 | 1395-5733 | JET, Main (.092), BOWL VENT Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 12 | 1395-5734 | HOSE, ECONOMIZER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 13 | 10-52195 | SCREW, FLOAT BOWL COVER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 14 | 1395-4804 | SCREW, FLOAT BOWL COVER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 15 | 8,13-26995 | LOCKWASHER, Stainless Steel |
| 16 | 1395-4805 | SCREEN, FILTER |
| 17 | 52518 | CLUSTER |
| 18 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 19 | 1395-7942 | SHAFT, THROTTLE |
| 20 | NSS | NOT SOLD SEPARATE, TUBE, IDLE |
| 21 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 22 | 1395-5108 | SHUTTER, THROTTLE |
| 23 | NSS | NOT SOLD SEPARATE, SCREW, THROTTLE SHUTTER |
| 24 | NSS | NOT SOLD SEPARATE, SPRING, IDLE ADJUSTMENT SCREW |
| 25 | 1399-3515 | SCREW, IDLE ADJUSTMENT |
| 26 | NSS | NOT SOLD SEPARATE, NOZZLE, MAIN |
| 27 | 1395-4542 | SCREW, PLUG - MAIN NOZZLE |
| 28 | 1395-6029 | JET, Main Fuel (.068) |
| 29 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 30 | NSS | NOT SOLD SEPARATE, GASKET, JET CHANNEL PLUG SCREW |
| 31 | NSS | NOT SOLD SEPARATE, SPRING, THROTTLE SHAFT RETURN |
| 32 | 1395-4543 | SCREW, BODY CHANNEL |
| 33 | NSS | NOT SOLD SEPARATE, PLUG |
| 34 | 27-481641 | GASKET, CARBURETOR FLANGE |
| 35 | 11-64809 | NUT, CARBURETOR MOUNTING STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 54293A10 | SOLENOID ASSEMBLY, Choke |
| 2 | 10,13-26996 | LOCKWASHER, Stainless Steel, SOLENOID TERMINAL |
| 3 | 10,11-68219 | NUT, , SOLENOID TERMINAL |
| 4 | 10-25299 | SCREW, (.312-18 x .75), CHOKE SOLENOID |
| 5 | 13-8M0204647 | LOCKWASHER, (.312), CHOKE SOLENOID SCREW |
| 6 | 90548A1 | PLUNGER AND LINK ASSEMBLY, CHOKE SOLENOID |
| 7 | 52518 | CLUSTER, THROTTLE LEVER (UPPER CARBURETOR) |
| 8 | 1395-6027 | SCREW, CLUSTER TO THROTTLE LEVER |
| 9 | 1368-5702A19 | CARBURETOR ASSEMBLY, COMPLETE Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 10 | 53720A2 | COUPLING ASSEMBLY |
| 11 | 10-66104 | SCREW, (#8-32 x .790) |
| 12 | 28-89694 | INSERT, THROTTLE COUPLING |
| 13 | 59757 | BRACKET, COIL LEAD RETAINER Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 14 | 10-64278 | SCREW, (.250-28 x 1.00) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 15 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 16 | 11-8M0207775 | NUT, (1/4-28) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 17 | 90242A1 | KNOB, CHOKE ROD |
| 18 | 25-20116 | GROMMET, CHOKE ROD |
| 19 | 49589 | STRAP, CHOKE KNOB TO CHOKE ROD |
| 20 | 10-69570 | SCREW (5/8") Comment: SN# USA-4394237/Canada-7075523 & Up |
| 21 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 22 | 48203 | ROD, CHOKE |
| 23 | 10-48591 | SCREW, (#10-32 x .500) |
| 24 | 10-32,11-46438 | NUT, |
| 25 | 48152 | SHUTTER, CHOKE - CARBURETOR |
| 26 | 16-69037 | STUD, CARBURETOR - CHOKE SHUTTER PIVOT |
| 27 | 10-32,11-20110 | NUT, |
| 28 | 35-57819 | SCREEN, FILTER - CARBURETOR |
| 29 | 16-23051 | SCREW (1") Comment: (UPPER CARBURETOR) |
| 30 | 24-57818 | SPRING, UPPER FILTER SCREEN SCREW |
| 31 | 10-32,11-20110 | NUT, |
| 32 | 24-48230 | SPRING, CHOKE ROD TENSION |
| 33 | 10-657461 | STUD, CHOKE ROD SPRING TO CARBURETOR |
| 34 | 23-32427 | SPACER, CHOKE ROD SPRING STUD |
| 35 | 11-8M0207775 | NUT, (1/4-28) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY Comment: SN# USA-4310785/Canada-7075523 & Up |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY Comment: SN# USA-4310785/Canada-7075523 & Up |
| 3 | 12-70988 | WASHER, THUMB SCREW Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 THRU USA-4310784/Australia-8027439/Canada-7075522 |
| 3A | 75043 | CAP, THUMB SCREW Comment: SN# USA-4310785/Canada-7075523 & Up |
| 4 | 8M0041936 | TUBE, TILT |
| 5 | 12-52864 | WASHER |
| 6 | 11-858869 | NUT, (.875-14) |
| 7 | 53078 | CAP, PLASTIC |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD (NOT USED WITH FULL POWER TRIM) |
| 10 | 13-8M0204647 | LOCKWASHER, (.312) |
| 11 | 11-28770 | NUT, (.312-24) Stainless Steel |
| 12 | 17-8M0026068 | PIN ASSEMBLY, Tilt Lock (NOT USED WITH FULL POWER TRIM) |
| 13 | 10-68299 | SCREW, (.375-16 x 3.00) Stainless Steel, CLAMP BRACKET TO BOAT TRANSOM (UPPER) |
| 14 | 12-68300 | WASHER, (..88 x .39 x .06) (UPPER) |
| 15 | 11-82670912 | NUT, (.375-16) |
| 16 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 17 | 24-94891 | SPRING (NOT USED WITH FULL POWER TRIM) |
| 18 | 17-38311 | PIN (NOT USED WITH FULL POWER TRIM) |
| 19 | 23-28688 | SPACER, RUBBER (NOT USED WITH FULL POWER TRIM) |
| 20 | 63473 | TUBE (USED WITH FULL POWER TRIM)-LONG SH Comment: (LONG SHAFT) |
| 21 | 76386 | TILT LOCK ASSEMBLY (STARBOARD) Comment: SN# USA-4567952/Canada-7087423 & Up |
| 22 | 76385T | TILT LOCK ASSEMBLY (PORT) Comment: SN# USA-4567952/Canada-7087423 & Up |
| 23 | 79659 | TUBE, TILT LOCK Comment: SN# USA-4567952/Canada-7087423 & Up |
| 24 | 23-47803 | BUSHING Comment: SN# USA-4567951/Australia-8027439/Canada-7087422 & Below |
| 25 | 13-69150 | WAVE WASHER (STARBOARD SIDE ONLY) Comment: SN# USA-4567952/Canada-7087423 & Up |
| 25A | 26-22734 | SEAL, Oil Comment: SN# USA-4567952/Canada-7087423 & Up |
| 25B | 12-76388 | WASHER (STARBOARD SIDE ONLY) Comment: SN# USA-4567952/Canada-7087423 & Up |
| 25C | 25-627021 | O-RING, (.301 x .070) Comment: SN# USA-4567952/Canada-7087423 & Up |
| 26 | 18-47959 | COTTER PIN, TILT LOCK |
| 27 | 87431 | LOCK ASSEMBLY, Reverse (NOT USED WITH FULL POWER TRIM) |
| 28 | 24-29821 | SPRING (NOT USED WITH FULL POWER TRIM) |
| 29 | 56349 | SHAFT (NOT USED WITH FULL POWER TRIM) |
| 30 | 18-45882 | COTTER PIN (NOT USED WITH FULL POWER TRIM) |
| 31 | 55-28414 | PIN, LOWER SHOCK MOUNTING Comment: (LONG SHAFT) |
| 32 | 10-21937 | SCREW, LOWER SHOCK PIN Comment: (LONG SHAFT) |
| 33 | 11-8M0207775 | NUT, (1/4-28) Comment: (LONG SHAFT) |
| 34 | 55-58780A7 | SHOCK ABSORBER (NOT USED WITH FULL POWER TRIM) |
| 35 | 23-32171 | BUSHING, RUBBER (UPPER)(NOT USED WITH FULL POWER TRIM) |
| 36 | 23-28198 | BUSHING, RUBBER (LOWER)(NOT USED WITH FULL POWER TRIM) |
| 37 | 23-73203 | BUSHING Comment: SN# USA-4394237/Canada-7075523 & Up |
| 38 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 39 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 40 | 12-69374 | WASHER Comment: SN# USA-4567952/Canada-7087423 & Up |
| 41 | 10-69375 | SCREW Comment: SN# USA-4567952/Canada-7087423 & Up |
| 42 | 70679 | COVER Comment: SN# USA-4567951/Australia-8027439/Canada-7087422 & Below |
| 43 | 10-37655 | SCREW, (#10-32 x .500) Comment: SN# USA-4567951/Australia-8027439/Canada-7087422 & Below |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92-271091 | ADHESIVE COMPOUND, EMBLEM FASTENING |
| 1 | 2183-7928A3 | COVER ASSEMBLY, Cowl - Front Comment: SN# USA-4310785/Canada-7075523 & Up |
| 2 | 56849 | KNOB, COWL FRONT COVER FASTENING |
| 3 | 12-30771 | WASHER (RUBBER) |
| 4 | 12-59572 | WASHER (PLASTIC) |
| 5 | 24-30772 | SPRING, TENSION |
| 6 | 17-29077 | PIN, Roll, TENSION SPRING TO KNOB |
| 7 | 31089 | STRIP, SOUND ABSORBING |
| 8 | 38675 | BLANKET, SOUND ABSORBING |
| 9 | 35769 | SEAL, SOUND ABSORBING - UPPER |
| 10 | 53334 | SEAL, SOUND ABSORBING - TOP |
| 11 | 2136-4660A4 | WRAP AROUND COWL ASSEMBLY |
| 12 | 46785A1 | LATCH ASSEMBLY, Cowl |
| 13 | 30413 | HOOK, COWL LATCH FASTENING |
| 14 | 30021 | BLANKET, SOUND ABSORBING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 436-9072A1 | CRANKSHAFT ASSEMBLY |
| 2 | 11-52901 | NUT, (.625-18), FLYWHEEL TO CRANKSHAFT |
| 3 | 30-62567T | BEARING, Ball, UPPER |
| 4 | 30-63742T | BEARING, Ball, LOWER |
| 5 | 54196A6 | CARRIER ASSEMBLY, "O" RING |
| 6 | 65800 | PACKING, CARRIER |
| 7 | 535-5397A4 | BEARING ASSEMBLY, Center Main Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 8 | 17-20032 | PIN, Dowel, CENTER MAIN BEARING |
| 9 | 29-714221 | BEARING, NEEDLE - OUTER RACE |
| 10 | 26113T | RACE, OUTER (PAIR) |
| 11 | 53-26933 | RING, Snap, OUTER RACE |
| 12 | 17-47246 | PIN, Dowel, STEPPED |
| 13 | 10-22968 | SCREW, (.250-28 x 1.25) |
| 14 | 11-8M0207775 | NUT, (1/4-28) |
| 15 | 540-5266T5 | BEARING ASSEMBLY, Main, VALVE TYPE Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 16 | 17-20032 | PIN, Dowel, MAIN BEARING |
| 17 | 10-45775 | SCREW, (#12-28 x .560) |
| 18 | 11-45774 | NUT |
| 19 | 34-56007A1 | REED SET, MATCHED - MAIN BEARING |
| 20 | 34-56008 | STOP, Reed, MAIN BEARING REED VALVES |
| 21 | 10-62204 | SCREW, REED STOP MOUNTING |
| 22 | 11-53153 | NUT, REED STOP SCREW |
| 23 | 774-9137A13 | PISTON ASSEMBLY (2 RING) Comment: (.015 OVERSIZE) |
| 24 | 53-857196 | RING, Lock, PISTON PIN |
| 25 | 39-78811A12 | RING (1/16" THICK) Comment: (.015 OVERSIZE) |
| 26 | 624-8101A3 | CONNECTING ROD ASSEMBLY |
| 27 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 28 | 10-54803 | SCREW, (.250-28 x 1.500) |
| 29 | 11-49091 | NUT |
| 30 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 31 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 86251A78 | POWERHEAD ASSEMBLY Comment: SN# USA-4567952/Canada-7087423 & Up |
| 1 | 852-7401A2 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: SN# USA-4567952/Canada-7087423 & Up |
| 2 | 27-53862 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 66517 | RESTRICTOR, CRANKCASE BLEED |
| 4 | 16-64936 | STUD, CARBURETOR MOUNTING (1-3/16") |
| 5 | 16-64281 | STUD, (.375-16/.375-24 x 1.880), CRANKCASE TO EXHAUST EXTENSION PLATE |
| 6 | 17-43044 | PIN, Dowel, CRANKCASE TO CYLINDER BLOCK |
| 7 | 17-63779 | PIN, Dowel (.250 x .625), CYLINDER BLOCK TO MAIN BEARING |
| 8 | 16-64282 | STUD, (4 In.), CYLINDER BLOCK TO DRIVESHAFT HOUSING PLATE |
| 9 | 56029T | COVER, STARTER MOTOR BRACKET - TOP |
| 10 | 10-69267 | SCREW, (.312-18 x 1.750), TOP COVER ATTACHING Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 11 | 13-8M0204647 | LOCKWASHER, (.312) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 12 | 11-29250 | NUT, (5/16-24) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 13 | 76867 | COVER, STARTER MOTOR BRACKET - BOTTOM |
| 14 | 10-73279 | SCREW, BOTTOM COVER ATTACHING (1 7/8") Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 15 | 13-8M0204647 | LOCKWASHER, (.312) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 16 | 11-29250 | NUT, (5/16-24) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 17 | 10-73657 | SCREW, (.312-18 x 1.50) Comment: SN# USA-4394237/Canada-7075523 & Up |
| 18 | 12-22753 | WASHER Comment: SN# USA-4394237/Canada-7075523 & Up |
| 19 | 11-29250 | NUT, (.312-24) Comment: SN# USA-4394237/Canada-7075523 & Up |
| 20 | 10-20359 | SCREW, (.375-16 x 1.00), CENTER MAIN BEARING LOCKING |
| 21 | 14-20091 | TAB WASHER, BEARING LOCKING SCREW |
| 22 | 58124A4 | SWITCH, MERCURY |
| 23 | 10-69235 | SCREW, (.190-24 x .500) |
| 24 | 10-62568 | SCREW, (#10-16 x .375), MERCURY SWITCH LEAD |
| 25 | 54-20387 | CLAMP |
| 26 | 54-20386 | CLAMP, BALANCE TUBE TO ELBOW AND TEE |
| 27 | 32-9938779 | HOSE, BLEED - (7 1/2", 6 1/2" AND 10") Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 28 | 22-656701 | FITTING, UPPER CYLINDER BLEED Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 29 | 21-64871A2 | CHECK VALVE ASSEMBLY, BLEED HOSE Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 30 | 21-42657A3 | CHECK VALVE ASSEMBLY Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 31 | 32-8M0108355 | TUBE, BALANCE - MAIN BEARING (6 1/4") Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 32 | 22-20781 | ELBOW, BALANCE TUBE TO MAIN BEARING SCREW Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 33 | 22-65349 | TEE, BLEED HOSE TO CYLINDER BLOCK - CENTER Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 34 | 22-130342 | FITTING, BLEED HOSE TO CYLINDER BLOCK - LOWER Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 35 | 21-42866 | CHECK VALVE ASSEMBLY, BLEED HOSE - UPPER Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 36 | 21-42657A3 | CHECK VALVE ASSEMBLY Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 37 | 32-9938779 | HOSE, BLEED (22") Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 38 | 21-428671 | CONNECTOR ASSEMBLY, BLEED HOSE - LOWER Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 39 | 22-20781 | ELBOW, BALANCE HOSE Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 40 | 32-8M0108355 | HOSE, BALANCE - MAIN BEARING (6 1/4") Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 41 | 22-8585531 | TEE, BALANCE HOSE Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 2 | 32197 | STOP, SPARK ADVANCE - DISTRIBUTOR HOUSING |
| 3 | 17-27962 | PIN, ANCHOR SPRING - DISTRIBUTOR HOUSING |
| 4 | 24-27944 | SPRING, HORSESHOE - DISTRIBUTOR HOUSING |
| 5 | 12-53540 | WASHER, ECONOMIZER COLLAR - DISTRIBUTOR HOUSING |
| 6 | 55804A1 | ECONOMIZER COLLAR ASSEMBLY |
| 7 | 17-27961 | PIN, ECONOMIZER COLLAR - SPRING RETAINER |
| 8 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR |
| 9 | 27947 | SWIVEL, LINKAGE - ECONOMIZER COLLAR |
| 10 | 25996A1 | SWIVEL AND LINK ROD ASSEMBLY Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 11 | 11-29598 | NUT Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 12 | 37700 | ROD, LINK - UPPER Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 12A | 67469 | ROD LINK, LINK - UPPER Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 13 | 27948 | SWIVEL, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 14 | 78992 | LEVER, THROTTLE CONTROL |
| 15 | 13-39954 | WAVE WASHER, |
| 16 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 17 | 11-35888 | NUT, (.250-28) Stainless Steel |
| 18 | 10-31830 | SCREW (1-3/4") |
| 19 | 12-8M0042641 | WASHER, (.390 x 1.00 x .06) |
| 20 | 23-45818 | BUSHING |
| 21 | 11-8M0204726 | NUT |
| 22 | 37587 | SWIVEL, LOWER - THROTTLE CONTROL LEVER TO THROTTLE CABLE |
| 23 | 11-35888 | NUT, (.250-28) Stainless Steel |
| 24 | 48692 | COLLAR, THROTTLE ACTUATOR |
| 25 | 10-48675 | SCREW, ADJUSTING (1-1/2") |
| 26 | 11-64015 | NUT, (.250-20) |
| 27 | 52023 | CAP, NYLON |
| 28 | 48671 | PLATE, THROTTLE ACTUATOR |
| 29 | 10-37892 | SCREW, (.190-32 x 1.00) |
| 30 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel, THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 31 | 10,13-26996 | LOCKWASHER, Stainless Steel, THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 32 | 23-48674 | SPACER, THROTTLE ACTUATOR PLATE SCREW |
| 33 | 58454 | CAM, THROTTLE ACTUATOR PLATE |
| 34 | 12-46246 | WASHER, ADAPTOR - DISTRIBUTOR HOUSING |
| 35 | 66165A2 | ADAPTOR ASSEMBLY, DISTRIBUTOR Comment: USA SN# 3761035 AND ABOVE Australia SN# 8014005 AND ABOVE Canada SN# 7025598 AND ABOVE |
| 36 | 22-25094 | FITTING, GREASE - DISTRIBUTOR ADAPTOR |
| 37 | 10-73657 | SCREW, (.312-18 x 1.50), DISTRIBUTOR HOUSING TO CRANKCASE (1 1/2")- Comment: USA SN# 3761035 AND ABOVE Australia SN# 8014005 AND ABOVE Canada SN# 7025598 AND ABOVE |
| 38 | 12-20084 | WASHER, (.328 x .562 x .062), DISTRIBUTOR HOUSING SCREW |
| 39 | 11-22053 | NUT, (5/16-24), DISTRIBUTOR HOUSING SCREW Comment: USA SN# 3761034 AND BELOW Australia SN# 8014004 AND BELOW Canada SN# 7025597 AND BELOW |
| 40 | 84-93388A1 | STRAP ASSEMBLY, Ground, GROUND - DISTRIBUTOR ADAPTOR TO FRONT SUPPORT BRACKET |
| 41 | 55805 | BRACKET, STOP |
| 42 | 10-28636 | SCREW, (.250-20 x .750) |
| 43 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 44 | 10-64022 | SCREW, (.250-20 x 2.125) |
| 45 | 11-64015 | NUT, (.250-20) |
| 46 | 52023 | CAP, NYLON - STOP BRACKET ADJUSTING SCREW |
| 47 | 12-27939 | WASHER |
| 48 | 14-27960 | TAB WASHER |
| 49 | 13-27959 | WASHER, WAVE - DISTRIBUTOR BALL BEARING TENSION |
| 50 | 54567 | CAP, DISTRIBUTOR HOUSING |
| 51 | 23-47250 | SPACER, DRIVE PULLEY |
| 52 | 29906A1 | PULLEY ASSEMBLY, Driven |
| 53 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 54 | 29907 | FLANGE, DRIVEN PULLEY |
| 55 | 28-29910 | KEY, DISTRIBUTOR DRIVER |
| 56 | 10-68554 | SCREW, PULLEY CLAMPING |
| 57 | 20140 | BELT, TIMING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 36549A1 | MARKER KIT |
| 1 | 30-20066 | BEARING, DISTRIBUTOR HOUSING (UPPER) |
| 2 | 11-54209 | NUT, ROTOR SHAFT TO DISTRIBUTOR HOUSING |
| 3 | 23-53539 | SLEEVE, ROTOR SHAFT |
| 4 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 5 | 53417 | STRAP ASSEMBLY, Ground, DISTRIBUTOR TO CRANKCASE |
| 6 | 10-62568 | SCREW, (#10-16 x .375), GROUND STRAP ATTACHING |
| 7 | 58807A1 | FLAME ARRESTOR ASSEMBLY, VENT - DISTRIBUTOR HOUSING |
| 8 | 15-55853 | SHIM, BALL BEARING TO DISTRIBUTOR HOUSING |
| 9 | 30-26379 | BEARING, DISTRIBUTOR HOUSING (LOWER) |
| 10 | 15-21148A1 | SHIM SET, BALL BEARING TO SPACER |
| 11 | 23-53538 | SPACER, ROTOR SHAFT |
| 12 | 53-26406 | RING, RETAINER - BALL BEARING TO DISTRIBUTOR HOUSING |
| 13 | 393-4313 | DISC, ROTOR |
| 14 | 393-4312 | ROTOR, DISTRIBUTOR |
| 15 | 54-60768 | CLAMP, DISTRIBUTOR CAP TO DISTRIBUTOR HSG Comment: PART OF DISTRIBUTOR CAP ASSEMBLY |
| 16 | 10-65774 | SCREW, (#8-32 x 1.120), DISTRIBUTOR CAP CLAMP Comment: PART OF DISTRIBUTOR CAP ASSEMBLY |
| 17 | 11-26768 | NUT, DISTRIBUTOR CAP CLAMP SCREW Comment: PART OF DISTRIBUTOR CAP ASSEMBLY |
| 18 | 84-821945A2 | CABLE ASSEMBLY, CAP TO COIL Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 19 | 25-26547 | GROMMET, HIGH TENSION CABLE |
| 20 | 332-2854T01 | BOOT, HIGH TENSION CABLE TO COIL |
| 21 | 85-94589 | SLEEVE, HIGH TENSION CABLE |
| 22 | 393-1293A1 | BRUSH KIT |
| 23 | 58807A1 | FLAME ARRESTOR ASSEMBLY, VENT - DISTRIBUTOR CAP |
| 24 | 27-55896 | GASKET, DISTRIBUTOR CAP |
| 25 | 33-896329827 | SPARK PLUG (CHAMPION L-76V) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 26 | 8M0084600 | CONNECTOR, SPARK PLUG LEAD |
| 27 | 85-63709A1 | PROTECTOR, SPARK PLUG LEAD |
| 28 | 85-94589 | SLEEVE, SPARK PLUG LEAD TO DISTRIBUTOR |
| 28A | 23-622381 | SLEEVE, SPARK PLUG LEAD (7") |
| 29 | 25-26547 | GROMMET, SPARK PLUG LEADS |
| 30 | 45409 | RETAINER, Wire, HIGH TENSION LEADS |
| 31 | 45392 | BRACKET, FRONT - WIRE RETAINER |
| 32 | 47398 | BRACKET, REAR - WIRE RETAINER |
| 33 | 10-62568 | SCREW, (#10-16 x .375), FRONT AND REAR BRACKET ATTACHING |
| 34 | 45391 | SPACER, RUBBER - HIGH TENSION LEADS |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1573-5239A4 | HOUSING ASSEMBLY, Driveshaft - Mercury (LONG SHAFT) Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 2 | 16-56295 | STUD, (.437 x 2.69) |
| 3 | 19-64649 | PLUG, PLASTIC Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 4 | 16-34378 | STUD (2-5/16") Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 5 | 37417 | COVER, TRIM |
| 6 | 10-57807 | SCREW, (#10-16 x .750) Stainless Steel |
| 6A | 25-92012 | GROMMET, PLASTIC |
| 6B | 46933A2 | STRAP ASSEMBLY, Ground |
| 6C | 10-62568 | SCREW, (#10-16 x .375) |
| 7 | 32-60897 | TUBE, WATER INLET Comment: (LONG SHAFT) |
| 8 | 78184T | TUBE, EXHAUST- (LONG SHAFT) Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 8A | 65638 | BOOT, TUBE MOUNT Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 9 | 10-28636 | SCREW, (.250-20 x .750) Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 10 | 13-26992 | LOCKWASHER, (.250) Stainless Steel Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 11 | 11-69254 | NUT, POWERHEAD STUDS (3/8-24) |
| 12 | 12-20553 | WASHER, POWERHEAD STUDS |
| 13 | 27-66335 | GASKET Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 THRU USA-4112634/Australia-8027114/Canada-7047257 |
| 14 | 52887 | GUIDE Comment: NOT USED WITH FULL POWER TRIM |
| 15 | 47558 | ROD, PUSH (LONG SHAFT) Comment: NOT USED WITH FULL POWER TRIM |
| 16 | 11-69254 | NUT, JAM Comment: NOT USED WITH FULL POWER TRIM |
| 17 | 47559 | YOKE Comment: NOT USED WITH FULL POWER TRIM |
| 18 | 24-78203A2 | PIN Comment: NOT USED WITH FULL POWER TRIM |
| 19 | 18-25191 | COTTER PIN Comment: NOT USED WITH FULL POWER TRIM |
| 20 | 75296 | MOUNT, RUBBER - UPPER |
| 21 | 12-47840 | WASHER, RUBBER |
| 22 | 12-31263 | WASHER |
| 23 | 11-8M0204653 | NUT, (.437-20) Stainless Steel |
| 24 | 75299 | MOUNT, RUBBER - LOWER (LONG SHAFT) |
| 25 | 10-75284 | SCREW, LOWER MOUNT (5-1/2") |
| 26 | 12-49339 | WASHER, (.8125) |
| 27 | 11-25096 | NUT |
| 28 | 25067 | BUMPER, RUBBER |
| 30 | 11-8M0204653 | NUT, (.437-20) Stainless Steel |
| 31 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel |
| 32 | 11-29489 | NUT |
| 33 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel |
| 34 | 35608 | CLAMP |
| 35 | 24-35522 | SPRING, TENSION |
| 36 | 10-29256 | SCREW, (.312-18 x .875) |
| 37 | 35474T | COVER, LOWER MOUNT CLAMP |
| 38 | 11-35521 | NUT |
| 39 | 10-29722 | SCREW, (#12-24 x .625) |
| 40 | 62497 | BRACKET, SUPPORT - DRIVESHAFT Comment: (LONG SHAFT) |
| 41 | 10-48409 | SCREW, (#10-16 x .625) Stainless Steel Comment: (LONG SHAFT) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 84-69236A1 | HARNESS ASSEMBLY Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 3 | 54-76368 | CLAMP, WIRING HARNESS TO BOTTOM COWL |
| 4 | 10-690201 | SCREW, (#10-32 x .875) |
| 5 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 6 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel |
| 7 | 24-28975 | SPRING, GARTER |
| 8 | 10-98256 | SCREW, (.250-28 x .50) |
| 9 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 10 | 54-648552 | CLIP (1/8") |
| 11 | 10-62568 | SCREW, (#10-16 x .375) |
| 12 | 8M0084613 | C WASHER |
| 13 | 45559 | TERMINAL BLOCK, STATOR LEADS |
| 14 | 10-62568 | SCREW, (#10-16 x .375) |
| 15 | 332-2986A21 | SWITCHBOX ASSEMBLY Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 16 | 10-32,11-45076 | NUT, Brass |
| 17 | 10-29794 | SCREW (3/8") |
| 18 | 10-64279 | SCREW (3/4") |
| 19 | 11-8M0207775 | NUT, (1/4-28) |
| 20 | 84-93389A12 | CABLE |
| 21 | 10-69035 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel |
| 22 | 8M0043376 | STOP, RUBBER |
| 23 | 23-56774 | SPACER |
| 24 | 23-8M0034918 | COLLAR, RUBBER |
| 25 | 50-898265010 | STARTER MOTOR ASSEMBLY Comment: (BOSCH) |
| 26 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 27 | 11-64015 | NUT, (.250-20) |
| 28 | 89-853654A1 | SOLENOID, Starter Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 29 | 10-38601 | SCREW, (.250-28 x 1.250) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 30 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 31 | 269011 | BUMPER, RUBBER |
| 32 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 33 | 10-32,11-68219 | NUT, Stainless Steel |
| 34 | 84-93388A8 | CABLE Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 35 | 13-8M0204647 | LOCKWASHER, (.312) |
| 36 | 11-8M0204668 | NUT, (.312-18) |
| 37 | 46265 | BOOT, SOLENOID TERMINAL |
| 38 | 8M0058226 | RECTIFIER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 39 | 10-37656 | SCREW, (#10-32 x .620) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 40 | 11-8M0207775 | NUT, (1/4-28) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 41 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 42 | 10-32,11-45076 | NUT, Brass Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-7401A2 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: SN# USA-4567952/Canada-7087423 & Up |
| 2 | 1134-3197A1 | END CAP ASSEMBLY, UPPER |
| 3 | 26-41953 | SEAL, Oil, END CAP |
| 4 | 25-47254 | O-RING |
| 5 | 15-47248A1 | SHIM, END CAP TO CRANKCASE (.002-3-5-10) |
| 6 | 10-30225 | SCREW WITH LOCKWASHER, (.312-18 x 1.00), END CAP MOUNTING |
| 7 | 1148-5410T1 | END CAP ASSEMBLY, LOWER Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 8 | 21-42657A3 | CHECK VALVE ASSEMBLY, END CAP Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 9 | 26-41953 | SEAL, Oil, END CAP |
| 10 | 25-32546 | O-RING, END CAP |
| 11 | 15-20085A1 | SHIM SET, END CAP TO CRANKCASE (.002-3-5-10) |
| 12 | 10-30225 | SCREW WITH LOCKWASHER, (.312-18 x 1.00) |
| 13 | 71808 | COVER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 14 | 27-721421 | GASKET, WATER JACKET COVER |
| 15 | 10-53167T | SCREW, (.312-18 x .880) |
| 16 | 12-8M0042642 | WASHER, (.323 x .563 x .063) Stainless Steel |
| 17 | 27-854952 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 18 | 757781 | PLATE, BAFFLE - EXHAUST MANIFOLD |
| 19 | 27-854972 | GASKET, BAFFLE PLATE TO EXHAUST MANIFOLD COVER |
| 20 | 99896A1 | COVER, EXHAUST MANIFOLD |
| 21 | 10-53576 | SCREW, (.312-18 x 1.125) |
| 22 | 22-328022 | PLUG, Pipe (.125-27) |
| 23 | 1023-8368A1 | COVER, CYLINDER BLOCK |
| 24 | 27-981853 | GASKET, CYLINDER BLOCK COVER |
| 25 | 10-8M0214943 | SCREW, (1/4-20 x 1) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 26 | 11-8M0207775 | NUT, (1/4-28) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 27 | 22-328022 | PLUG, Pipe (.125-27) |
| 28 | 37440 | BRACKET, MOUNT SUPPORT - CYLINDER BLOCK |
| 29 | 10-35386 | SCREW, (.312-18 x 1.00) |
| 30 | 66094 | COVER, TRANSFER PORT Comment: (BOTTOM) SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 31 | 27-64941 | GASKET, TRANSFER PORT COVER |
| 32 | 10-28636 | SCREW, (.250-20 x .750) |
| 33 | 43352 | POINTER, TIMING Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 34 | 10-28636 | SCREW, (.250-20 x .750) Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 35 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 36 | 46933A1 | GROUND WIRE, EXHAUST COVER |
| 37 | 10-62568 | SCREW, (#10-16 x .375) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 43289A2 | PLATE ASSEMBLY, EXHAUST EXTENION Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 2 | 23-27132 | BUSHING, NYLON Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 3 | 37918 | SEAL, EXHAUST EXTENSION PLATE |
| 4 | 99358 | STRIP, RETAINING - EXHAUST EXTENSION PLATE SEAL |
| 5 | 10-37571 | SCREW, (.190-32 x .500), SEAL AND RETAINING STRIP TO EXT. PLATE (1/2") |
| 6 | 17-23784 | PIN, Dowel, EXHAUST EXTENSION PLATE |
| 7 | 27-692381 | GASKET Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 8 | 10-66023 | SCREW, (.312-18 x 2.00) Flange Head Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 9 | 13-8M0204647 | LOCKWASHER, (.312) Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 10 | 10-66023 | SCREW, (.312-18 x 2.00) Flange Head Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 11 | 27-661021 | GASKET Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 12 | 12-34437 | WASHER Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 13 | 11-64809 | NUT Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 14 | 26-60898 | SEAL, DRIVESHAFT HOUSING PLATE |
| 15 | 43290A4 | PLATE ASSEMBLY Comment: SN# USA-4394237/Canada-7075523 & Up |
| 16 | 26-38970 | SEAL, RUBBER |
| 17 | 17-23784 | PIN, Dowel, DRIVESHAFT HOUSING PLATE |
| 18 | 27-62362 | GASKET, MEGAPHONE TO DRIVESHAFT HOUSING PLATE |
| 19 | 99699 | MEGAPHONE, EXHAUST |
| 20 | 10-60480 | SCREW, MEGAPHONE TO DRIVESHAFT HOUSING PLATE (1 1/8") |
| 21 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 22 | 12-20553 | WASHER, POWERHEAD STUD |
| 23 | 11-82671013 | NUT, (.375-24), POWERHEAD STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, Yellow, FLYWHEEL PULLER THREADS |
| 2 | 11-52901 | NUT, (.625-18), FLYWHEEL (PART OF A-436-4842A3 CRANKSHAFT ASSEMBLY) |
| 3 | 12-33001 | WASHER, FLYWHEEL NUT |
| 4 | 225-2494A37 | FLYWHEEL ASSEMBLY, COMPLETE Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 5 | 10-32417 | SCREW, (.250-28 x .625) |
| 6 | 10-69088 | SCREW, PLATE/HUB TO FLEX. PLATE Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 7 | 17-26618 | PIN, DOWEL - PULLEY TO FLYWHEEL |
| 8 | 29788 | FLANGE, FLYWHEEL PULLEY |
| 9 | 30306 | PULLEY, FLYWHEEL |
| 10 | 29787 | HUB, FLYWHEEL PULLEY |
| 11 | 398-4793 | STATOR, ALTERNATOR (NOT AS SHOWN) |
| 12 | 10-63136 | SCREW, (#10-24 x .880), STATOR TO UPPER END CAP |
| 13 | 54-22627 | CLIP, STATOR/WIRING HARNESS LEADS FASTENING Comment: (1/2") |
| 14 | 10-62568 | SCREW, (#10-16 x .375), STATOR LEAD CLIP FASTENING |
| 15 | 8M0084613 | C WASHER, CLIP FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 55156A5 | PUMP ASSEMBLY, Fuel |
| 2 | 21-30430A3 | CHECK VALVE ASSEMBLY |
| 3 | 55278A1 | DIAPHRAGM KIT |
| 4 | NSS | NOT SOLD SEPARATE, GASKET, FUEL PUMP |
| 5 | NSS | NOT SOLD SEPARATE, GASKET, CHECK VALVE TO HOUSING |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING |
| 8 | 10-69067 | SCREW, (.250-20 x 1.375) |
| 9 | 22-328022 | PLUG, Pipe (.125-27), BOTTOM PUMP |
| 10 | 32-33154A1 | LINE ASSEMBLY, Fuel, PUMP TO CARBURETOR (14-1/8") |
| 11 | 22-30174 | ELBOW |
| 12 | 22-30175 | SLEEVE |
| 13 | 22-30177 | NUT |
| 14 | 54-22627 | CLIP, FUEL LINE TO CYLINDER BLOCK |
| 15 | 10-62568 | SCREW, (#10-16 x .380) |
| 16 | 8M0084613 | D WASHER |
| 17 | 22-8M0123050 | FITTING, Elbow (45 Degree) , FUEL LINE TO CARBURETOR |
| 18 | 32-31584A1 | LINE ASSEMBLY, Fuel, CARBURETOR TO CARBURETOR |
| 19 | 32-55827A1 | LINE ASSEMBLY, Fuel, PUMP TO CARB. (9-1/2") |
| 20 | 32-55828A1 | LINE ASSEMBLY, Fuel, PUMP TO PUMP (13-3/4") |
| 21 | 22-30468 | CONNECTOR, TOP AND BOTTOM PUMP |
| 22 | 22-30175 | SLEEVE |
| 23 | 22-30177 | NUT |
| 24 | 32-55829 | LINE, Fuel, ADAPTOR TO LOWER FUEL PUMP (15") |
| 25 | 30186 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 26 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 27 | 24-30189 | SPRING, ADAPTOR STEM |
| 28 | 25-16524 | O-RING, ADAPTOR STEM |
| 29 | 30188 | WASHER, ADAPTOR |
| 30 | 10-88488 | SCREW, ADAPTOR TO BOTTOM COWL Comment: (3-1/4") |
| 31 | 11-8M0207775 | NUT, (1/4-28) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 66530A2 | PUMP ASSEMBLY, Fuel |
| 2 | 21-30430A7 | CHECK VALVE ASSEMBLY |
| 3 | 89031A1 | DIAPHRAGM ASSEMBLY |
| 4 | NSS | NOT SOLD SEPARATE, GASKET, DIAPHRAGM |
| 5 | NSS | NOT SOLD SEPARATE, GASKET, CHECK VALVE |
| 6 | 25-35480 | O-RING, COVER TO HOUSING |
| 7 | NSS | NOT SOLD SEPARATE, GASKET, NYLON - FILTER COVER SCREW |
| 8 | 35-59072 | SCREEN, FILTER - INLET |
| 9 | 23004 | RETAINER, CHECK VALVE |
| 10 | 10-43725 | SCREW, RETAINER TO FUEL PUMP (1/4") |
| 11 | 13-26994 | LOCKWASHER, RETAINER SCREW |
| 12 | 35-91078A1 | COVER, FUEL INLET |
| 13 | 10-37370 | SCREW, (#10-32 x .580), COVER TO FUEL PUMP |
| 14 | 22-19688 | FITTING, FUEL OUTLET |
| 15 | 10-66686 | SCREW, (#10-32 x 1.00), FUEL PUMP TO BASE |
| 16 | 66575 | BASE, FUEL PUMP |
| 17 | 10-66687 | SCREW, (#10-32 x 1.50) |
| 18 | 22-19688 | FITTING, PULSE LINE |
| 19 | 24-68434 | SPRING, PULSE LINE |
| 20 | 32-8M0108355 | LINE, Fuel (3-1/4") |
| 21 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 22 | 22-19688 | FITTING, PULSE LINE TO TRANSFER COVER |
| 23 | 32-8M0108355 | LINE, Fuel, ADAPTOR TO FUEL PUMP (6-3/4") |
| 24 | 22-63981 | FITTING, FUEL LINE TO ADAPTOR |
| 25 | 32-8M0108355 | LINE, Fuel, FUEL PUMP TO UPPER CARBURETOR (15-3/4") |
| 26 | 54-22627 | CLIP, FUEL LINE ATTACHING |
| 27 | 10-62568 | SCREW, (#10-16 x .375), FUEL LINE CLIP |
| 28 | 8M0084613 | C WASHER, FUEL LINE CLIP SCREW |
| 29 | 22-66328 | FITTING, TEE - UPPER CARBURETOR |
| 30 | 22-64706001 | TEE, TEE - CENTER CARBURETOR |
| 31 | 22-19688 | FITTING, ELBOW - LOWER CARBURETOR |
| 32 | 32-8M0108355 | LINE, Fuel, CARBURETOR TO CARBURETOR (6-1/4") |
| 33 | 22833 | ADAPTOR, CHECK UNIT (FUEL LINE) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 34 | 23069 | STEM, CHECK UNIT ADAPTOR Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 35 | 24-23067T | SPRING, ADAPTOR STEM Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 36 | 25-16524 | O-RING, ADAPTOR STEM |
| 37 | 30188 | WASHER, ADAPTOR |
| 38 | 10-69029 | SCREW, (.250-28 x 1.750), ADAPTOR TO BOTTOM COWL Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 39 | 11-8M0207775 | NUT, (1/4-28) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1655-7333T23 | GEAR HOUSING ASSEMBLY, BASIC Comment: SN# USA-4394237/Canada-7075523 & Up |
| 2 | 17-21438 | PIN |
| 3 | 16-57921 | STUD, (.437-14/.437-20 x 4.00), GEAR HOUSING TO DRIVESHAFT HOUSING |
| 4 | 16-8M0133358 | STUD, (.44 x 2.06), GEAR HOUSING TO DRIVESHAFT HOUSING |
| 5 | 16-8M0034463 | STUD, (.312 x 3.38), WATER PUMP BASE AND BODY TO GEAR HOUSING |
| 6 | 16-306671 | STUD, (.250-20/.250-28 x 3.125), WATER PUMP BASE AND BODY TO GEAR HOUSING |
| 7 | 31-32898T | BEARING, ROLLER - DRIVESHAFT |
| 8 | 45-42646 | DRIVESHAFT Comment: (LONG SHAFT) SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 9 | 43-68548T3 | GEAR, PINION |
| 10 | 11-35921 | NUT, (.625-18), PINION GEAR TO DRIVESHAFT |
| 11 | 15-57007A1 | SHIM, BALL BEARING TO BASE Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 12 | 31-69220T | BEARING, Roller Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 13 | 53-30726 | RING, RETAINING Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 14 | 27-8M0214962 | GASKET Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 15 | 25-8M0214923 | O-RING, (1.984 x .139) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 16 | 46-96146A5 | BASE ASSEMBLY, Water Pump Comment: SN# USA-4394237/Canada-7075523 & Up |
| 17 | 26-94038 | SEAL, Oil |
| 18 | 26-16977 | SEAL, Oil |
| 19 | 17-35973 | PIN, Dowel |
| 20 | 27-8M0090319 | GASKET, LOWER |
| 21 | 8M0204677 | FACE PLATE |
| 22 | 27-858524 | GASKET, UPPER |
| 23 | 46-96148T1 | BODY ASSEMBLY, Water Pump |
| 24 | 48752T | INSERT, WATER PUMP BODY |
| 26 | 26-38970 | SEAL, RUBBER |
| 27 | 47-89984T4 | IMPELLER |
| 28 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 29 | 10-30720 | SCREW, (.250-20 x 2.25) |
| 30 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 31 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 32 | 11-826709109 | NUT, (.250-28) |
| 33 | 12-36001 | WASHER |
| 34 | 11-826709111 | NUT, (.312-24) |
| 35 | 25-8M0214918 | RING, Rubber |
| 36 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 37 | 37641001 | SEAL Comment: NOT PART OF GEAR HOUSING ASSEMBLY COMPLETE USA SN# 3761035 AND ABOVEAustralia SN# 8014005 AND ABOVECanada SN# 7025598 AND ABOVE SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 38 | 38051 | PLATE Comment: NOT PART OF GEAR HOUSING ASSEMBLY COMPLETE USA SN# 3761035 AND ABOVEAustralia SN# 8014005 AND ABOVECanada SN# 7025598 AND ABOVE SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 39 | 76062A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 40 | 53-29641 | E RING |
| 41 | 25-25439 | O-RING, (.862 x .103) |
| 42 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 43 | 26-892361 | SEAL, Oil (UPPER) |
| 44 | 12-31266 | WASHER, RUBBER |
| 45 | 78036 | SPACER, LOWER - REVERSE LOCKING Comment: NOT USED WITH FULL POWER TRIM |
| 46 | 43308T1 | CAM, REVERSE LOCKING Comment: NOT USED WITH FULL POWER TRIM |
| 47 | 22-8M0058389 | SCREW, Magnetic, DRAIN Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 48 | 12-191833 | WASHER |
| 49 | 19-48750 | PLUG, GEAR HOUSING FLUSHING HOLE Comment: SN# USA-4394236/Australia-8027439/Canada-7075522 & Below |
| 50 | 12-8M0204663 | WASHER, (.187 x .500 x .062) Neoprene Comment: SN# USA-4394236/Australia-8027439/Canada-7075522 & Below |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1655-7333T23 | GEAR HOUSING ASSEMBLY, BASIC Comment: SN# USA-4394237/Canada-7075523 & Up |
| 51 | 760394 | CAM, SHIFT |
| 52 | 30625 | FOLLOWER, CAM |
| 53 | 30624 | SLIDE, CROSS PIN |
| 54 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 55 | 15-30923A1 | SHIM, BEARING OUTER RACE TO GEAR HSG. (.002-3-5-10) |
| 56 | 31-30894A1 | BEARING SET, Cup And Cone |
| 57 | 31-30895T | BEARING, Needle, FORWARD GEAR |
| 58 | 43-68447T1 | GEAR, Forward Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 59 | 52-822539T | RATCHET, SLIDING GEAR |
| 60 | 17-8M0100263 | PIN, Cross, RATCHET TO PROPELLER SHAFT |
| 61 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 62 | 44-93003 | SHAFT, PROPELLER |
| 63 | 43-76250T | GEAR, Reverse Comment: SN# USA-4734318/Australia-8047300/Canada-7105198 & Up |
| 64 | 15-29955A1 | SHIM SET, THRUST WASHER TO GEAR HOUSING Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 65 | 12-76358 | WASHER, THRUST Comment: SN# USA-4734318/Australia-8047300/Canada-7105198 & Up |
| 66 | 30-31265 | BEARING, BALL - REVERSE GEAR Comment: SN# USA-4734317/Australia-8047299/Canada-7105197 & Below |
| 67 | 25-29976 | O-RING, BEARING CARRIER |
| 68 | 41529T2 | CARRIER ASSEMBLY, Bearing Comment: SN# USA-4734318/Australia-8047300/Canada-7105198 & Up |
| 69 | 31-30956T | BEARING, Needle, BEARING CARRIER |
| 70 | 26-8M0204670 | SEAL, BEARING CARRIER |
| 71 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 72 | 14-52700 | TAB WASHER, GEAR HOUSING COVER |
| 73 | 52699 | COVER, GEAR HOUSING |
| 74 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 75 | 10-66024 | SCREW, (.437-14 x 1.75) |
| 76 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel |
| 77 | 11-8M0204653 | NUT, (.437-20) Stainless Steel |
| 78 | 10-65210 | SCREW, (.375-16 x 1.00) |
| 79 | 65091Q01 | THRUST HUB Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 80 | 12-29590 | WASHER, CUPPED - THRUST HUB Comment: SN# USA-3761034/Australia-8014004/Canada-7025597 & Below |
| 81 | 12-31211Q03 | WASHER, SPLINED - PROPELLER NUT |
| 82 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 83 | 11-52707Q1 | NUT, PROPELLER Comment: (INCLUDED ON ALL GEAR HOUSING ASSEMBLIES, COMPLETE) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 25-48171 | O-RING, HYDRAULIC PUMP TO MANIFOLD PLATE |
| -- | 55642A13 | CONTROL PANEL ASSEMBLY, COMPLETE |
| 1 | 45060A7 | PUMP ASSEMBLY, Hydraulic |
| 2 | 25-48171 | O-RING |
| 3 | 10-79953Q04 | SCREW, (.375-16), FILLER |
| 4 | 12-191833 | WASHER, SEALING |
| 5 | 10-62269 | SCREW, VENT |
| 6 | 37-55901 | DECAL, INSTRUCTION |
| 7 | 32979 | LEAD, Battery (POSITIVE) |
| 8 | 32988 | LEAD, Battery (NEGATIVE) |
| 9 | 45336 | PLATE, MANIFOLD |
| 10 | 45197A2 | VALVE ASSEMBLY, Control |
| 11 | 25-45254 | O-RING, CONTROL VALVE TO MANIFOLD PLATE (3/4" O.D.) |
| 12 | 25-48171 | O-RING, CONTROL VALVE TO MANIFOLD PLATE (1/2" O.D.) |
| 13 | 25-45253 | O-RING, CONTROL VALVE TO MANIFOLD PLATE (5/8" O.D.) |
| 14 | 10-56500 | SCREW, (.250-28 x 1.250) |
| 15 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 16 | 22-38609 | PLUG, CONTROL VALVE (3/8-24") |
| 17 | 22-46008 | PLUG, CONTROL VALVE (1/2-20") |
| 18 | 45325A1 | HARNESS ASSEMBLY |
| 19 | 45559 | TERMINAL BLOCK, HYDRAULIC PUMP |
| 20 | 10-35519 | SCREW, (#10-16 x .500) |
| 21 | 10-62568 | SCREW, (#10-16 x .380) |
| 22 | 45377T | BRACKET, MOUNTING - HYDRAULIC PUMP TO BOAT |
| 23 | 10-35386 | SCREW, (.312-18 x 1.00) |
| 24 | 13-39107 | LOCKWASHER, (.312-24) |
| 25 | 11-21908 | NUT, (.312-18) Cad Plated |
| 26 | 10-68298 | BOLT, HYDRAULIC PUMP TO BOAT (3-1/4") |
| 27 | 11-35304 | NUT, HYDRAULIC PUMP BOLT |
| 28 | 25661T1 | SOLENOID |
| 29 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 30 | 10,11-68219 | NUT, |
| 31 | 13-8M0204647 | LOCKWASHER, (.312) |
| 32 | 11-22053 | NUT, (5/16-24) |
| 33 | 46265 | BOOT, RUBBER |
| 34 | 74407T | BRACKET, MOUNTING - STARTER SOLENOID |
| 35 | 10-21140 | SCREW, (.250-28 x .50) |
| 36 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 37 | 10-34290 | SCREW, (.250-20 x .625) |
| 38 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 39 | 11-21825 | NUT, (.250-28) |
| 40 | 13-27660 | LOCKWASHER |
| 41 | 10,11-68219 | NUT, |
| 41A | 49342 | BUMPER, RUBBER |
| 42 | 55642A17 | PANEL, CONTROL |
| 43 | 16-55422 | STUD, (#10-32 x 2.00), CONTROL PANEL TO BOAT |
| 44 | 12-24676 | WASHER, (.200 x .440 x .032) |
| 45 | 10-32,11-27164 | NUT AND LOCKWASHER, |
| 46 | 55738A1 | SWITCH ASSEMBLY, PUSH BOTTON - CONTROL PANEL |
| 47 | 53107 | WIRE, Jumper (3.00 Inches), PUSH BOTTON SWITCH (PURPLE) |
| 48 | 55641 | RETAINER, PUSH BOTTON SWITCH |
| 49 | 10-62568 | SCREW, (#10-16 x .375) |
| 50 | 84-87394A20 | HARNESS ASSEMBLY, CONTROL PANEL (20 FEET) |
| 51 | 33865 | BINDER, NYLON - CONTROL PANEL HARNESS |
| 52 | 95814 | CLAMP, HARNESS FASTENING |
| 53 | 10-29227 | SCREW, (#8-32 x 0.50) |
| 54 | 11-34388 | NUT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 45060A7 | PUMP ASSEMBLY, Hydraulic, COMPLETE |
| 1 | 25-48171 | O-RING, HYDRAULIC PUMP |
| 2 | 392-7734 | VALVE BODY AND GEAR ASSEMBLY |
| 3 | 392-2618 | CAN, VALVE BODY |
| 4 | 10-20411 | SCREW, (.190-24 x .62), VALVE BODY TO RESERVIOR |
| 5 | 392-7735 | SEAL, RESERVIOR TO VALVE BODY AND GEAR |
| 6 | 392-2939 | RESERVOIR ASSEMBLY |
| 7 | 10-62269 | SCREW, VENT - HYDRAULIC PUMP |
| 8 | 10-79953Q04 | SCREW, (.375-16), FILLER - HYDRAULIC PUMP |
| 9 | 12-191833 | WASHER, SEALING - FILLER SCREW |
| 10 | 392-2623 | WASHER, THRUST - ARMATURE |
| 11 | 392-2943 | ARMATURE, FIELD AND FRAME |
| 12 | 392-2942 | FIELD AND FRAME ASSEMBLY |
| 13 | 392-2944 | BALL, COMMUTATOR END PLATE |
| 14 | 392-2940 | PLATE ASSEMBLY, COMMUTATOR END |
| 15 | 392-8989 | BRUSH SET, COMMUTATOR END PLATE |
| 16 | 392-2529 | SPRING SET, BRUSH TENSION |
| 17 | 392-2938 | BOLT SET, THRU - PLATE AND FRAME TO RESERVOIR |
| 18 | 10,13-26996 | LOCKWASHER, Stainless Steel, THRU BOLT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-4895A5 | COIL ASSEMBLY, Ignition, COMPLETE Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 2 | 10-37941 | SCREW, (.250 x 1.750) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 3 | 13-26992 | LOCKWASHER, (.250) Stainless Steel Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 4 | 10-88488 | SCREW (3-1/4") Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 5 | 23-52933 | SPACER Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 6 | 11-8M0207775 | NUT, (1/4-28) Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 7 | 332-4895T2 | COIL ASSEMBLY, Ignition Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 8 | 72015 | PAD, RUBBER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 9 | 63195 | COVER, IGNITION COIL Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 10 | 10-88856 | SCREW (2") Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 11 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 12 | 84-60466A1 | CABLE ASSEMBLY, Black (2.50 Inches) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 13 | 10,13-26996 | LOCKWASHER, Stainless Steel, IGNITION COIL TERMINAL Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 14 | 10-32,11-45076 | NUT, Brass, IGNITION COIL TERMINAL Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 15 | 84-66054A2 | CABLE ASSEMBLY, COIL TO SWITCH BOX Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 16 | 10-62568 | SCREW, (#10-16 x .375) Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 17 | 69190 | PLATE, COIL MOUNTING Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 79-73370A3 | TACHOMETER ASSEMBLY |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 64507A1 | REPAIR KIT Comment: (3/4 INCH) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 48-52010A3 | PROPELLER ASSEMBLY, Bronze (25 Inch Pitch) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1482-6386A4 | SWIVEL BRACKET ASSEMBLY Comment: (LONG SHAFT) SN# USA-4567952/Canada-7087423 & Up |
| 2 | 23-69132 | BUSHING Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 3 | 23-69341 | BUSHING Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 4 | 12-69342 | WASHER Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 5 | 26-37448 | SEAL, Oil, SWIVEL BRACKET |
| 6 | 10-47828 | SCREW, DRIVE |
| 7 | 22-8M0169589 | FITTING, Grease Comment: SN# USA-4567952/Canada-7087423 & Up |
| 8 | 19-77633Q | LUBRICAP Comment: SN# USA-4310784/Australia-8027439/Canada-7075522 & Below |
| 9 | 17-25598 | PIN, REVERSE LOCK SPRING(NOT USED WITH FULL POWER TRIM) |
| 10 | 12-37429 | WASHER, SWIVEL PIN - LOWER |
| 11 | 28205T | STRAP, Stop, DRIVESHAFT HOUSING TO SWIVEL BRACKET |
| 12 | 10-28200 | SCREW, (.375-24 x 2.875) |
| 13 | 11-25269 | NUT, (.375-24) |
| 14 | 17-73593A2 | SWIVEL PIN ASSEMBLY, Steering Arm (LONG SHAFT) Comment: YOKE IS ATTACHED WITH A RETAINING RING |
| 15 | 73984T | YOKE, BOTTOM Comment: YOKE IS ATTACHED WITH A RETAINING RING |
| 16 | 11-37424 | NUT, BOTTOM YOKE ATTACHING Comment: YOKE IS ATTACHED WITH A NUT |
| 16A | 53-73591 | RING, Retaining Comment: YOKE IS ATTACHED WITH A RETAINING RING |
| 17 | 28203 | BUMPER, STEERING ARM |
| 18 | 10-49554 | BOLT, (.437-20 x 5.875) |
| 19 | 11-8M0204653 | NUT, (.437-20) Stainless Steel |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2114-7934T | COWL, TOP Comment: SN# USA-4394237/Canada-7075523 & Up |
| 2 | 52733A9 | RETAINER ASSEMBLY, TOP COWL Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 3 | 35496 | PAD, BUMPER-TOP COWL RETAINER |
| 4 | 10-74824 | SCREW, RETAINER TO TOP COWL (1 1/4") |
| 5 | 13-39107 | LOCKWASHER, (.312-24) |
| 6 | 76370 | SHIELD, REAR |
| 7 | 10-37370 | SCREW, (#10-32 x .580), SHIELD TO TOP COWL |
| 8 | 13-37371 | LOCKWASHER, SHIELD SCREW |
| 9 | 47341A11 | ROPE AND HANDLE KIT, Manual/Emergency Start (FOR MANUAL STARTING ONLY) |
| 10 | 52739 | HINGE, TOP COWL |
| 11 | 94918F1 | LEVER, COWL LATCH HINGE |
| 12 | 17-58998 | PIN, ROLL - COWL LATCH LEVER TO HINGE |
| 13 | 55455 | HOOK, TOP COWL LATCH - REAR |
| 14 | 10-22956 | SCREW, (.250-28 x .880), REAR HOOK TO TOP COWL |
| 15 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 16 | 79897A4 | FRAME ASSEMBLY, TOP COWL SUPPORT Comment: SN# USA-4394237/Canada-7075523 & Up |
| 17 | 37-73291 | DECAL, TIMING (FLYWHEEL) Comment: SN# USA-4394237/Canada-7075523 & Up |
| 18 | 46096 | MOUNT, RUBBER - TOP COWL FRAME Comment: (HEAVY DUTY) |
| 19 | 11-35888 | NUT, (.250-28) Stainless Steel, RUBBER MOUNT TO TOP COWL FRAME |
| 20 | 86472 | BRACKET, TOP COWL SUPPORT - REAR |
| 21 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 22 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 23 | 11-29598 | NUT, (.250-28) Stainless Steel |
| 24 | 10-37562 | SCREW, (.312-18 x 1.00) Stainless Steel, REAR BRACKET TO FRAME Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 25 | 11-60049 | NUT, REAR BRACKET SCREW Comment: SN# USA-4112634/Australia-8027114/Canada-7047257 & Below |
| 26 | 13-8M0204647 | LOCKWASHER, (.312), REAR BRACKET SCREW Comment: SN# USA-4112635/Australia-8027115/Canada-7047258 & Up |
| 27 | 10-37562 | SCREW, (.312-18 x 1.00) Stainless Steel |
| 28 | 13-8M0204647 | LOCKWASHER, (.312) |
| 29 | 42706A1 | BRACKET ASSEMBLY, TOP COWL - FRONT Comment: SN# USA-4394237/Canada-7075523 & Up |
| 30 | 10-60411 | SCREW, (1.25), FRONT BRACKET TO BOTTOM COWL Comment: SN# USA-4394237/Canada-7075523 & Up |
| 31 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, FRONT BRACKET SCREW Comment: SN# USA-4394237/Canada-7075523 & Up |
| 32 | 10-55511 | SCREW, (.312-18 x 1.500) |
| 33 | 13-8M0204647 | LOCKWASHER, (.312) |
| 34 | 37640 | MOUNT, RUBBER |
| 35 | 13-8M0204647 | LOCKWASHER, (.312), RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 36 | 11-28770 | NUT, (.312-24) Stainless Steel, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 92194A14 | TRIM CYLINDER |
| 1A | 22-8M0169589 | FITTING, Grease (USE WITH A-76509A3 TRIM CYLINDER) |
| 2 | 10-45265 | SCREW, (#10-32 x .3125), BLEED - SHOCK CYLINDER |
| 3 | 25-45016 | O-RING, SHOCK CYLINDER BLEED SCREW |
| 4 | 10-45264 | SCREW, (.500-20 x 1.500) |
| 5 | 23-45280 | SPACER, SHOCK CYLINDER - LOWER |
| 6 | 23-94907A1 | BUSHING, RUBBER - SHOCK CYLINDER |
| 7 | 89108A3 | BRACKET, MOUNTING - SHOCK CYLINDER (PORT) |
| 8 | 10-45263 | SCREW, (.500-20 x .2.250) |
| 9 | 10-68298 | BOLT, (.375-16 x 3.250), MOUNTING BRACKET TO BOAT TRANSOM |
| 10 | 12-68410 | WASHER, MOUNTING BRACKET BOLT |
| 11 | 11-82670912 | NUT, (.375-16), MOUNTING BRACKET BOLT |
| 12 | 89807A1 | BRACKET ASSEMBLY, MOUNTING - SHOCK CYLINDER (STARBOARD) |
| 13 | 26-70608 | SEAL, Oil, STARBOARD MOUNTING BRACKET |
| 14 | 89290 | PLUNGER, LIMIT SWITCH ACTUATING |
| 15 | 24-95881 | SPRING, TENSION - LIMIT SWITCH PLUNGER |
| 16 | 16-45282 | STUD, (.312-24 x 16.620), MOUNTING BRACKET AND CLAMP BRACKET |
| 17 | 13-8M0204647 | LOCKWASHER, (.312) |
| 18 | 11-28770 | NUT, (.312-24) Stainless Steel |
| 19 | 10-45328 | SCREW, (.437-20 x 3.560) |
| 20 | 12-37807 | WASHER |
| 21 | 11-20696 | NUT |
| 22 | 24-24390 | SPRING, TENSION - ADJUSTING STUD |
| 23 | 16-8M0034461 | STUD, (#10-32 x .930) |
| 24 | 10-32,11-859124 | NUT, Stainless Steel |
| 25 | 99897 | CAM, LIMIT SWITCH ADJUSTING STUD |
| 26 | 86967 | PLATE, RETAINING - LIMIT SWITCH CAM |
| 27 | 10-68513 | SCREW, (#10-32 x .375) Stainless Steel |
| 28 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 29 | 45326A2 | SWITCH ASSEMBLY, CUT-OUT LIMIT |
| 30 | 23-45354 | BUSHING, RUBBER |
| 31 | 10-47255 | SCREW, (#4-40 x .625) |
| 32 | 45287 | COVER, LIMIT SWITCH |
| 33 | 27-45275 | GASKET, LIMIT SWITCH COVER |
| 34 | 10-24942 | SCREW, (10-32 x 0.4375) |
| 35 | 87774A1 | COVER, INLET - TRANSOM |
| 36 | 27-45274 | GASKET, INLET COVER |
| 37 | 25-45507 | GROMMET, RUBBER - INLET COVER |
| 38 | 10-32866 | SCREW, (#10-32 x 2.00) Stainless Steel, INLET COVER TO BOAT |
| 39 | 12-20878 | WASHER, INLET COVER SCREW |
| 40 | 10-32,11-8M0204718 | NUT, , INLET COVER SCREW |
| 41 | 32-88005 | HOSE, TRIM - CYLINDER TO CONTROL VALVE (5') - 13/32" O.D. |
| 42 | 32-88006 | HOSE, LIFT - CYLINDER TO CONTROL VALVE (5') - 13/32" O.D. |
| 43 | 23-35977 | GROMMET, RUBBER - LIFT HOSE AND TRIM HOSE |
| 44 | 73519A1 | STRAP, Tilt Stop |
| 45 | 69259 | TUBE, MOUNTING - TILT STOP Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 46 | 69258 | PIN, MOUNTING TUBE Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
| 47 | 18-36002 | COTTER PIN, MOUNTING TUBE PIN Comment: SN# USA-3761035/Australia-8014005/Canada-7025598 & Up |
Regular maintenance keeps your Mercury 1150 running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
