Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
OEM and aftermarket replacement parts for Mercury 1150, 115. Scroll down for exploded parts diagrams (26), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 1150, 115 Reference Library — Exploded parts diagrams (26 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 1150, 115 is a 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve outboard motor. Powers center-console boats, larger pontoons, and offshore-capable fishing craft.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve |
| Horsepower | 115 HP |
| Displacement | 2100 cc (2.1L) |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK SILZKR7B11 |
| Engine Oil Capacity | 5.0 L (5.28 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | 24 fl oz (710 mL) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 1150, 115:
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 1150, 115.
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-8963A1 | COWL, BOTTOM |
| 2 | 52862A2 | DRIP TRAY ASSEMBLY, BOTTOM COWL |
| 3 | 37940 | PAD, SOUND - DRIP TRAY |
| 4 | 10-48408 | SCREW, DRIP TRAY TO BOTTOM COWL (1/2") |
| 5 | 32-8M0108355 | HOSE, DRIP TRAY TO BOTTOM COWL (8") |
| 6 | 39616 | CONTROL CABLES - BOTTOM COWL |
| 7 | 76369 | SPACER, BOTTOM COWL (COWL FRONT COVER) |
| 8 | 10-48591 | SCREW, SPACER TO BOTTOM COWL (1/2") |
| 9 | 37637 | BOOT, FUEL CONNECTOR - BOTTOM COWL |
| 10 | 37445 | SUPPORT, WIRING HARNESS - BOTTOM COWL |
| 11 | 10-69029 | SCREW, SUPPORT TO BOTTOM COWL (1 3/4") |
| 13 | 32-8M0108355 | HOSE Comment: TELL TALE - EXHAUST COVER TO BOTTOM COWL (21 1/2") |
| 14 | 52889 | NOZZLE, TELL TALE HOSE TO BOTTOM COWL |
| 15 | 10-48408 | SCREW Comment: TELL TALE NOZZLE TO BOTTOM COWL (1/2") |
| 16 | 22-782792 | ELBOW, TELL TALE HOSE TO CYLINDER BLOCK |
| 17 | 60304A54 | SHIFT SHAFT ASSEMBLY, UPPER |
| 18 | 23-26600 | BUSHING, SHIFT SHAFT |
| 20 | 73402 | LINK ROD ASSEMBLY |
| 21 | 12-35462 | WASHER, LINK ROD |
| 22 | 11-36069 | NUT, LINK ROD |
| 23 | 13-29720 | WASHER, WAVE - LINK ROD |
| 24 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES |
| 25 | 39519 | CAP, BARREL RETAINER - ANCHOR BRACKET |
| 26 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING |
| 27 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING |
| 28 | 39667 | COVER, NYLON - SHIFT CABLE |
| 29 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 30 | 10-35386 | SCREW Comment: ANCHOR BRACKET TO CYLINDER BLOCK (1") |
| 31 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 32 | 37896 | GUIDE BLOCK, LINK ROD |
| 33 | 52100 | WEAR PLATE, LINK ROD |
| 34 | 8M0036768 | LATCH Comment: CONTROL CABLE FASTENING - ANCHOR BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 27-85653A87 | GASKET SET |
| 1 | 1368-5702A19 | CARBURETOR ASSEMBLY Comment: UNITED STATES 5050792 AND UP AUSTRALIA 8054755 AND UP CANADA 7118923 AND UP |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 6 | 1395-83181 | INLET NEEDLE, SEAT AND GASKET Comment: UNITED STATES 5050792 AND UP AUSTRALIA 8054755 AND UP CANADA 7118923 AND UP |
| 10 | 1395-5680 | COVER, FLOAT BOWL |
| 11 | 1399-6249 | JET, BOWL VENT (.96) Comment: UNITED STATES 5050792 AND UP AUSTRALIA 8054755 AND UP CANADA 7118923 AND UP |
| 12 | 1395-5734 | HOSE, ECONOMIZER |
| 13 | 10-52195 | SCREW, FLOAT BOWL COVER |
| 14 | 1395-4804 | SCREW, FLOAT BOWL COVER |
| 15 | 13-26995 | LOCKWASHER, FLOAT BOWL COVER SCREW |
| 17 | 8146791 | LEVER, THROTTLE (SEE NOT BELOW) |
| 18 | 1395-6027 | SCREW, THROTTLE STOP LEVER (SEE FOOT NOTE BELOW) |
| 19 | 1395-7942 | SHAFT, THROTTLE |
| 21 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 22 | 1395-5108 | SHUTTER, THROTTLE |
| 25 | 1399-3515 | SCREW, IDLE ADJUSTMENT |
| 27 | 1395-4542 | SCREW, PLUG-MAIN NOZZLE |
| 28 | 1395-6029 | JET, MAIN FUEL (.068) |
| 29 | 1395-4541 | SCREW,PLUG-MAIN FUEL JET CHANNEL |
| 32 | 1395-4543 | SCREW, BODY CHANNEL |
| 34 | 27-481641 | GASKET, CARBURETOR FLANGE |
| 35 | 11-64809 | NUT, CARBURETOR MOUNTING STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 54293A10 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 3 | 11-68219 | NUT, SOLENOID TERMINAL |
| 4 | 10-25299 | SCREW, CHOKE SOLENOID (3/4") |
| 5 | 13-8M0204647 | LOCKWASHER, CHOKE SOLENOID SCREW |
| 6 | 90548A1 | PLUNGER AND LINK ASSEMBLY, CHOKE SOLENOID |
| 7 | 52518 | CLUSTER, THROTTLE LEVER (UPPER CARBURETOR) |
| 8 | 1395-6027 | SCREW, CLUSTER TO THROTTLE LEVER |
| 9 | 1368-5702A19 | CARBURETOR ASSEMBLY, COMPLETE Comment: UNITED STATES 5050792 AND UP AUSTRALIA 8054755 AND UP CANADA 7118923 AND UP |
| 10 | 53720A2 | THROTTLE PICK-UP BRACKET ASSEMBLY |
| 11 | 10-66104 | SCREW, THROTTLE BRACKET MOUNTING |
| 12 | 28-89694 | INSERT, THROTTLE COUPLING |
| 17 | 90242A1 | KNOB, SHCOLE ROD |
| 18 | 25-20116 | BROMMET, CHOKE ROD |
| 19 | 49589 | STRAP, CHOKE KNOB TO CHOKE ROD |
| 20 | 10-77137 | SCRE, STRAP TO CHOKE KNOB (5/8") |
| 22 | 48203 | ROD, CHOKE |
| 23 | 10-48591 | SCREW, STRAP TO CHILE RDO ( 1/2") |
| 24 | 11-46438 | NUT, STRAP TO CHOKE ROD SCREW |
| 25 | 48152 | SHUTTER, CHOKE-CARBURETOR |
| 26 | 16-69037 | STUD, CARBURETOR-CHOKE SHUTTER PIVOT |
| 27 | 11-20110 | NUT, CHOKE SHUTTER TO CARBURETOR STUD |
| 28 | 35-57819 | SCREEN ASSEMBLY, FILTER-CARBURETOR |
| 29 | 10-23015 | SCREW Comment: UPPER CARBURETOR FILTER SCREEN TO CARB. (1") |
| 30 | 24-57818 | SPRING, UPPER FILTER SCREEN SCREW |
| 31 | 11-20110 | NUT Comment: CARBURETOR FILTER SCREEN FASTENING SCREW |
| 32 | 24-48230 | SPRING, CHOKE ROD TENSION |
| 33 | 10-657461 | STUD, CHOKE ROD SPRING TO CARBURETOR |
| 34 | 23-32427 | SPACER, CHOKE ROD SPRING STUD |
| 35 | 11-8M0207775 | NUT, CHOKE ROD SPRING TO CARBURETOR STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY |
| 2A | 10-78495 | SCREW, WASHER ATTACHING |
| 2B | 12-78493 | WASHER, THUMB SCREW |
| 3 | 75043 | CAP, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLAMP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD Comment: CLAMP BRACKET (NOT USED WITH FULL POWER TRIM) |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY Comment: (NOT USED WITH FULL POWER TRIM) |
| 13 | 10-68299 | BOLT, CLAMP BRACKET TO BOAT TRANSOM (UPPER) |
| 14 | 12-68300 | WASHER, CLAMP BRACKET BOLT (UPPER) |
| 15 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 16 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 17 | 24-94891 | SPRING, COIL - SWIVEL BRACKET Comment: (NOT USED WITH FULL POWER TRIM) |
| 18 | 17-38311 | PIN, COIL SPRING MOUNTING Comment: (NOT USED WITH FULL POWER TRIM) |
| 19 | 23-28688 | SPACER, RUBBER - COIL SPRING POSITIONING Comment: (NOT USED WITH FULL POWER TRIM) |
| 20 | 63473 | TUBE Comment: CUSHION - SHOCK PIN(USED WITH FULL POWER TRIM) |
| 21 | 76386 | TILT LOCK ASSEMBLY (STARBOARD) |
| 22 | 76385T | TILT LOCK ASSEMBLY (PORT) |
| 23 | 79659 | TUBE, TILT LOCK |
| 25 | 13-69150 | WASHER Comment: WAVE - TILT LOCK (STARBOARD SIDE ONLY) |
| 25A | 26-22734 | OIL SEAL, SWIVEL BRACKET (TILT LOCK) |
| 25B | 12-76388 | WASHER, TILT LOCK (STARBOARD SIDE ONLY) |
| 25C | 25-627021 | "O" RING, TILT LOCK |
| 26 | 18-47959 | COTTER PIN, TILT LOCK |
| 27 | 87431 | REVERSE LOCK ASSEMBLY Comment: (NOT USED WITH FULL POWER TRIM) |
| 28 | 24-78203A2 | SPRING, REVERSE LOCK TENSION Comment: (NOT USED WITH FULL POWER TRIM) |
| 29 | 56349 | SHAFT, REVERSE LOCK PIVOT Comment: (NOT USED WITH FULL POWER TRIM) |
| 30 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT Comment: (NOT USED WITH FULL POWER TRIM) |
| 31 | 55-28414 | PIN, LOWER SHOCK MOUNTING |
| 32 | 10-21937 | SCREW, LOWER SHOCK PIN |
| 33 | 11-8M0207775 | NUT, LOWER SHOCK PIN SCREW |
| 34 | 55-58780A7 | SHOCK ABSORBER Comment: (NOT USED WITH FULL POWER TRIM) |
| 35 | 23-32171 | BUSHING, RUBBER - SHOCK ABSORBER (UPPER) Comment: (NOT USED WITH FULL POWER TRIM) |
| 36 | 12-28196 | BUSHING, RUBBER - SHOCK ABSORBER (LOWER) |
| 37 | 23-73203 | SPACER Comment: UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 38 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 39 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 40 | 12-69374 | WASHER Comment: UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 41 | 10-69375 | SCREW, UPPER AND LOWER SHOCK MOUNTING PIN |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 92-271091 | ADHESIVER COMPOUND, ELBLEM FASTENING |
| 1 | 2183-7928A3 | COWL FRONT COVER ASSEMBLY (WITHOUT DECALS) |
| 2 | 56849 | KNOB,COWL FRONT COVER FASTENING |
| 3 | 12-30771 | WASHER, COVER FASTENING KNOB (RUBBER) |
| 4 | 12-59572 | WASHER, COVER FASTENING KNOB (PLASTIC) |
| 5 | 24-30772 | SPRING TENSION - FASTENING KNOB |
| 6 | 17-29077 | ROLL PIN, TENSION SPRING TO KNOB |
| 7 | 31089 | STRIP, SOUND ABSORBING |
| 8 | 38674 | BAG, STARTER ROPE |
| 9 | 35769 | SEAL, SOUND ABSORBING - UPPER |
| 10 | 53334 | SEAL, SOUND ABSORBING - TOP |
| 11 | 2136-4660A4 | WRAP AROUND COWL ASSEMBLY Comment: (WITHOUT DECALS) |
| 12 | 46785A1 | COWL LATCH ASSEMBLY |
| 13 | 30413 | HOOK, COWL LATCH FASTENING |
| 14 | 30021 | BLANKET, SOUND ABSORBING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 27-85653A87 | GASKET SET |
| 1 | 436-9072A1 | CRANKSHAFT ASSEMBLY |
| 3 | 30-62567T | BEARING, BALL - UPPER |
| 4 | 30-63742T | BEARING, BALL - LOWER |
| 5 | 54196A6 | CARRIER ASSEMBLY, "O" RING |
| 6 | 65800 | "O" RING, CARRIER |
| 7 | 535-5397A4 | CENTER MAIN BEARING ASSEMBLY |
| 8 | 17-20032 | DOWEL PIN, CENTER MAIN BEARING |
| 9 | 29-714221 | BEARING, NEEDLE - OUTER RACE |
| 10 | 26113T | RACE, OUTER (PAIR) |
| 11 | 53-26933 | RING, SNAP - OUTER RACE |
| 12 | 17-47246 | DOWEL PIN, STEPPED |
| 13 | 10-22968 | SCREW, CENTER MAIN BEARING CLAMPING |
| 14 | 11-8M0207775 | NUT, BEARING CLAMPING SCREW |
| 15 | 540-5266T5 | MAIN BEARING ASSEMBLY, VALVE TYPE |
| 16 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 17 | 10-45775 | SCREW, MAIN BEARING CLAMPING |
| 18 | 11-45774 | NUT, MAIN BEARING CLAMPING SCREW |
| 19 | 34-56007A1 | REED SET, MATCHED - MAIN BEARING |
| 20 | 34-56008 | REED STOP, MAIN BEARING REED VALVES |
| 21 | 10-62204 | SCREW, REED STOP MOUNTING |
| 22 | 11-53153 | NUT, REED STOP SCREW |
| 23 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY |
| 24 | 53-857196 | LOCK RING, PISTON PIN |
| 25 | 39-78816A12 | RING, PISTON |
| 26 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 27 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 28 | 10-54803 | SCREW, CONNECTING ROD |
| 29 | 11-49091 | NUT, CONNECTING ROD SCREW |
| 30 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 31 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-7401A2 | CYLINDER BOLCK AND BRANKCASE ASS"Y Comment: UNITED STATES 5050792 AND UP AUSTRALIA 8054755 AND UP CANADA 7118923 AND UP |
| 2 | 27-53862 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 66517 | RESTRICTION, CRANKCASE BLEED |
| 4 | 16-64936 | STUD, CARBURETOR MOUNTING (1 3/16") |
| 5 | 16-64281 | STUD Comment: CRANKCASE TO EXHAUST EXTENSION PLATE (1 7/8") |
| 6 | 17-43044 | PIN, DOWEL-CRANKCASE TO CYLINDER BLOCK |
| 7 | 17-63779 | PIN, DOWEL-CYLINDER BOLCK TO MAIN BEARING |
| 8 | 16-64282 | STUD Comment: CYLINDER BLOCK TO DRIVE SHAFT HOUSING PLATE (4") |
| 9 | 56029T | COVER, STARTER MOTOR BRAKCET-TOP |
| 10 | 10-69267 | SCREW, TOP COVER ATTACHING ( 1 3/4") |
| 11 | 13-8M0204647 | LOCKWASHER, TOP COVER SCREWS |
| 13 | 76867 | COVER SARTERMOTOR BRACKET-BOTTOM |
| 14 | 10-73279 | SCREW, BOTTOM COVER ATTACHING ( 17/8") |
| 15 | 13-8M0204647 | LOCKWASHER,BOTTOM COVER SCREW |
| 17 | 10-73657 | SCREW,CRANKCASE TO CYLINDER BLOCK(1 1/2") |
| 18 | 12-22753 | WASHER Comment: CRANKCASE TO CYLINDER BLOCK SCREWS |
| 19 | 11-29250 | NUT Comment: CRANKCASE TO CYLINDER BLOCK SCREWS(LOWER) |
| 20 | 10-20359 | SCREW,CENTER MAIN BEARING LOCKING |
| 21 | 14-20091 | TAB WASHER,BEARING LOCKING SCREW |
| 22 | 58124A4 | SWITCH,MERCURY |
| 23 | 10-69235 | SCREW Comment: SWITCH TO FRONT MOUNTING BRACKET(1/2") |
| 24 | 10-62568 | SCRWE,MERCURY SEITCH LEAD |
| 25 | 21-42866 | CHECK VALVE,BLEED HOSE-UPPER |
| 26 | 32-9938779 | HOSE,BLEED (22") |
| 27 | 21-428671 | CHECK VALVE,BLEED HOSE-LOWER |
| 28 | 22-20781 | ELBOW,BALANCE HOSE |
| 29 | 32-8M0108355 | HOSE,BALANCE-MAIN BEARING (6 1/4") |
| 30 | 22-8585531 | TEE,BALANCE HOSE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 2 | 32197 | STOP, SPARK ADVANCE - DISTRIBUTOR HOUSING |
| 3 | 17-27962 | PIN, ANCHOR SPRING - DISTRIBUTOR HOUSING |
| 4 | 24-27944 | SPRING, HORSESHOE - DISTRIBUTOR HOUSING |
| 5 | 12-53540 | WASHER Comment: ECONOMIZER COLLAR - DISTRIBUTOR HOUSING |
| 6 | 55804A1 | ECONIZER COLLAR ASSEMBLY |
| 7 | 17-27961 | PIN, ECONOMIZER COLLAR - SPRING RETAINER |
| 8 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR |
| 9 | 27947 | SWIVEL, LINKAGE - ECONOMIZER COLLAR |
| 12A | 67469 | ROD, LINK - UPPER |
| 13 | 27948 | SWIVEL Comment: UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 14 | 78992 | LEVER, THROTTLE CONTROL |
| 15 | 2124-4416A2 | WASHER, WAVE - THROTTLE CONTROL LEVER SWIVEL |
| 16 | 12-8M0204649 | WASHER, THROTTLE CONTROL LEVER SWIVEL |
| 17 | 11-35888 | NUT, UPPER LINK ROD THROTTLE CONTROL LEVER |
| 18 | 10-31830 | SCREW Comment: THROTTLE LEVER TO EXHAUST COVER (1 3/4") |
| 19 | 12-8M0042641 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 20 | 23-45818 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 21 | 11-8M0204726 | NUT, THROTTLE CONTROL LEVER SCREW |
| 22 | 37587 | SWIVEL, LOWER Comment: THROTTLE CONTROL LEVER TO THROTTLE CABLE |
| 23 | 11-35888 | NUT, THROTTLE CABLE TO LOWER SWIVEL |
| 24 | 48692 | COLLAR, THROTTLE ACTUATOR |
| 25 | 10-48675 | SCREW, ADJUSTING Comment: THROTTLE ACTUATOR COLLAR (1 1/2") |
| 26 | 11-64015 | NUT Comment: THROTTLE ACTUATOR COLLAR ADJUSTING SCREW |
| 27 | 52023 | CAP Comment: NYLON - THROTTLE ACTUATOR COLLAR ADJUSTING SCREW |
| 28 | 48671 | PLATE, THROTTLE ACTUATOR |
| 29 | 10-37892 | SCREW Comment: THROTTLE ACTUATOR PLATE TO ECONOMIZER COLLAR (1") |
| 30 | 12-30164 | WASHER Comment: THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 31 | 13-26996 | LACKWASHER Comment: THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 32 | 23-48674 | SPACER, THROTTLE ACTUATOR PLATE SCREW |
| 33 | 58454 | CAM, THROOTLE ACTUATOR PLATE |
| 34 | 12-46246 | WASHER, ADAPTOR - DISTRIBUTOR HOUSING |
| 35 | 66165A2 | ADAPTOR ASSEMBLY, DISTRIBUTOR |
| 36 | 22-25094 | FITTING, GREASE - DISTRUBUTOR ADAPTOR |
| 37 | 10-73657 | SCREW Comment: DISTRIBUTOR HOUSING TO CRANKCASE (1 1/2") |
| 38 | 12-20084 | WASHER, DISTRIBUTOR HOUSING SCREW |
| 40 | 84-93388A1 | WIRE, GROUND Comment: DISTRUBUTOR ADAPTOR TO FRONT SUPPORT BARCKET |
| 41 | 55805 | BRACKET, STOP |
| 42 | 10-28636 | SCREW Comment: DISTRIBUTOR ADAPTOR TO STOP BRACKET (3/4") |
| 43 | 12-35462 | WASHER, STOP BRACKET FASTENING SCREW |
| 44 | 10-64022 | SCREW, STOP BRACKET ADJUSTING (2 1/8") |
| 45 | 11-64015 | NUT, STO BRACKET ADJUSTING SCREW |
| 46 | 52023 | CAP, NYLON - STOP BRACXKET ADJUSTING SCREW |
| 47 | 12-27939 | WASHER, SIDTRIBUTOR HOUSING |
| 48 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING |
| 49 | 13-27959 | WASHER Comment: WAVE - DISTRIBUTOR BALL BEARING TENSION |
| 50 | 54567 | CAPM DISTRIBUTOR HOUSING |
| 51 | 23-47250 | SPACER, DRIVE PULLEY |
| 52 | 29906A1 | DRIVEN PULLEY ASSEMBLY |
| 53 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 54 | 29907 | FLANGE, DRIVEN PULLEY |
| 55 | 28-29910 | KEY, DISTRUBUTOR DRIVER |
| 56 | 10-68554 | SCREW, PULLEY CLAMPING |
| 57 | 20140 | BELT, TIMING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| -- | 8M0084600 | CONNECTOR, SPARK PLUG LEAD |
| 1 | 30-20066 | BALL BEARING, DISTRUBUTOR HOUSING (UPPER) |
| 2 | 11-54209 | NUT, ROTOR SHAFT TO DISTRIBUTOR HOUSING |
| 3 | 23-53539 | SLEEVE, ROTOR SHAFT |
| 4 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 5 | 53417 | GROUND STRAP ASSEMBLY Comment: DISTRIBUTOR TO CRANKCASE |
| 6 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
| 7 | 58807A1 | FLAME ARRESTOR, VENT - DISTRUBUTOR HOUSING |
| 8 | 15-55853 | SHIM, BALL BEARING TO DISTRIBUTOR HOUSING |
| 9 | 30-26379 | BALL BEARING, DISTRIBUTOR HOUSING (LOWER) |
| 10 | 15-21148A1 | SHIM, BALL BEARING TO SPACER |
| 11 | 23-53538 | SPACER, ROTOR SHAFT |
| 12 | 53-26406 | RING Comment: RETAINER - BALL BEARING TO DISTRIBUTOR HOUSING |
| 13 | 393-4313 | DISC, ROTOR |
| 14 | 393-4312 | ROTOR, DISTRIBUTOR |
| 15 | 54-60768 | CLAMP, DISTRIBUTOR CAP TO DISTRUBUTOR HSG. Comment: PART OF DISTRIBUTOR CAO ASSEMBLY |
| 16 | 10-65774 | SCREW, DISTRIBUTOR CAP CLAMP (1 1/8") Comment: PART OF DISTRIBUTOR CAO ASSEMBLY |
| 17 | 11-26768 | NUT, DISTRUBUTOR CAP CLAMP SCREW |
| 18 | 84-821945A2 | CABLE ASSEMVLY, CAP TO COIL |
| 19 | 25-26547 | GROMMETT, HIGH TENSION CABLE |
| 20 | 332-2854T01 | BOOT, HIGH TENSION CABLE TO COIL |
| 21 | 85-94589 | BOOT, HIGH TENSION CABLE |
| 22 | 393-4841A2 | DISTRIBUTOR CAP ASSEMBLY |
| 23 | 58807A1 | FLAME ARRESTOR, VENT - DISTIBUTOR CAP |
| 24 | 27-55896 | GASKET, DISTRUBUTOR CAP |
| 25 | 33-896329827 | SPARK PLAY (CHAMPOIN L-76V) |
| 26 | 84-813715A1 | SPARK PLUG Comment: LEAD ASSEMBLY #1, #2, #3, #4, #5, AND #6 ORDER A-36549A1 KIT FOR REPLACEMENT OF LEAD WIRE MARKERS. |
| 27 | 85-63709A1 | PROCTECTOR, SPARK PLUG LEAD |
| 28 | 85-94589 | BOOT, SPARK PLUG LEAD TO DISTRIBUTOR |
| 28A | 23-622381 | SLEEVE, SPARK PLUG LEAD (7") |
| 29 | 25-26547 | GROMET, SPARK PLUG LEADS |
| 30 | 45409 | WIRE RETAINER, HIGH TENSION LEADS |
| 31 | 45392 | BRACKET, FRONT - WIRE RETAINER |
| 32 | 47398 | BRACKET, REAR - WORE RETAINER |
| 33 | 10-62568 | SCREW, FRONT AND REAR BRACKET ATTACHING |
| 34 | 45391 | SPACER, RUBBER - HIGH TENSION LEADS |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 17-21433 | DOWEL PIN, SPACER EXTRA LONG SHAFT |
| 1 | 1573-5239A4 | DRIVE SHAFT HOUSING ASSEMBLY |
| 2 | 16-74732 | STUD, DRIVE SHAFT HOUSING (EXTRA LONG SHAFT) |
| 3 | 19-64649 | PLUG, PLASTIC - TRIMB TAB SCREW HOLE |
| 5 | 37417 | COVER, TRIM - DRIVE SHAFT HOUSING |
| 6 | 10-57807 | SCREW, TRIM COVER TO BOTTOM COWL |
| 6A | 25-92012 | GROMMET, PLASTIC - TRIM COVER SCREW |
| 6B | 46933A2 | GROUND STRAP ASSEMBLY, TRIM COVER SCREW |
| 6C | 10-62568 | SCREW, GROUND STRAP ATTACHING |
| 7 | 32-77121 | TUBE, WATER INLET (EXTRA LONG SHAFT) |
| 8 | 78184T | TUBE, EXHAUST |
| 8A | 65638 | BOOT, RUBE MOUNT |
| 11 | 11-69254 | NUT, POWERHEAD STUDS (3/4-24) |
| 12 | 12-20553 | WASHER, POWERHEAD STUDS |
| 14 | 52887 | GUIDE, PUSH ROD - REVERSE LOCKING Comment: (NOT USED WITH FULL POWER TRIM) |
| 15 | 47558 | ROD, PUSH - REVERSE LOCK Comment: (NOT USED WITH FULL POWER TRIM) |
| 16 | 11-69254 | NUT, JAM - PUSH ROD Comment: (NOT USED WITH FULL POWER TRIM) |
| 17 | 47559 | YOKE, PUSH ROD Comment: (NOT USED WITH FULL POWER TRIM) |
| 19 | 18-25191 | COTTER PIN, PUSH ROD PIN Comment: (NOT USED WITH FULL POWER TRIM) |
| 20 | 75296 | MOUNT, RUBBER - UPPER |
| 21 | 12-47840 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 22 | 12-31263 | WASHER, UPPER MOUNT BOLT |
| 23 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 24 | 75299 | MOUNT, RUBBER - LOWER |
| 25 | 10-75284 | SCREW, LOWER MOUNT (5 1/2") |
| 26 | 12-49339 | WASHER, LOWER MOUNT SCREW |
| 27 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 28 | 25067 | BUMPER, RUBBER - LOWER MOUNTING SCREW |
| 30 | 11-8M0204653 | NUT Comment: GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 31 | 12-45176 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 32 | 11-29489 | NUT Comment: GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 33 | 12-45176 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 34 | 35608 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 35 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 36 | 10-29256 | SCREW Comment: LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING |
| 37 | 35474T | COVER, LOWER MOUNT CLAMP |
| 38 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 39 | 10-29722 | SCREW, COVER TO LOWER CLAMP MOUNT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-7401A2 | CYLINDER BLOCK AND CRANKCASE ASS'Y Comment: UNITED STATES 5050792 AND UP AUSTRALIA 8054755 AND UP CANADA 7118923 AND UP |
| 2 | 1134-3197A1 | END CAP ASSEMBLY |
| 3 | 26-41953 | OIL SEAL,END CAP |
| 4 | 25-47254 | "O"RING |
| 5 | 15-47248A1 | SHIM,END CAP TO CRANKCASE(.006-8-10) |
| 6 | 10-30225 | SCREW,END CAP MOUNTING |
| 7 | 1148-5410T1 | END CAP ASSEMBLY,LOWER |
| 9 | 26-41953 | OIL SEAL,END CAP |
| 10 | 25-32546 | "O" RING, END CAP |
| 11 | 15-20085A1 | SHIM, END CAP TO CRANKCASE(.002-3-5-10) |
| 12 | 10-30225 | SCREW,END CAP MOUNTING (1") |
| 13 | 71808 | COVER,WATER JACKET-CYLINDER BLOCK |
| 14 | 27-721421 | GASKET,WATER JACKET COVER |
| 15 | 10-53167T | SCREW Comment: WATER JACKET COVER TO CYLINDER BLOCK (7/8") |
| 16 | 12-8M0042642 | WASHER Comment: WATER JACKET COVER FASTENING SCREW |
| 17 | 27-854952 | GASKET,CYLINDER BLOCK TO BAFFLE PLATE |
| 18 | 757781 | PLATE,BAFFLE-EXHAUST MANIFOLD |
| 19 | 27-854972 | GASKET Comment: BAFFLE PLATE TO EXHAUST MANIFOLD COVER |
| 20 | 99896A1 | COVER, EXHAUST MANIFOLD |
| 21 | 10-53576 | SCREW, MANIFOLD COVER MOUNTING |
| 22 | 22-328022 | PLUG, PIPE - EXHAUST MANIFOLD COVER |
| 23 | 1023-8368A1 | COVER, CYLINDER BLOCK |
| 24 | 27-981853 | GASKET, CYLINDER BLOCK COVER |
| 25 | 10-8M0214943 | SCREW, COVER MOUNT (1") |
| 27 | 22-68307 | PLUG, PIPE - CYLINDER BLOCK COVER |
| 28 | 37440 | BRACKET, MOUNT SUPPORT - CYLINDER BLOCK |
| 29 | 10-35386 | SCREW, BRACKET TO CYLINDER BLOCK (1") |
| 30 | 66094 | COVER, TRANSFER PORT (BOTTOM) |
| 31 | 27-64941 | GASKET, TRANSFER PORT COVER |
| 32 | 10-28636 | SCREW, TRANSFER PORT COVER MOUNTING (3/4") |
| 33 | 43352 | POINTER, TIMING |
| 34 | 10-28636 | SCREW, TIMING POINTER ATTACHING (3/4") |
| 35 | 12-35462 | WASHER, TIMING POINTER SCREW |
| 36 | 46933A3 | GROUND STRAP ASSEMBLY, EXHAUST COVER |
| 37 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 43289A2 | PLATE ASSEMBLY, EXHAUST EXTENSION |
| 2 | 23-27132 | BUSHING, NYLON - EXHAUST EXTENSION PLATE |
| 3 | 37918 | SEAL, EXHAUST EXTENSION PLATE |
| 4 | 99358 | STRIP Comment: RETAINING - EXHAUST EXTENSION PLATE SEAL |
| 5 | 10-37571 | SCREW Comment: SEAL AND RETAINING STRIP TO EXT. PLATE (1/2") |
| 6 | 17-23784 | DOWL PIN, EXHAUST EXTENSION PLATE |
| 7 | 27-692381 | GASKET, POWERHEAD TO EXTENSION PLATE |
| 8 | 10-66023 | SCREW, ADAPTOR PLATE HOUSING PLATE (2") |
| 10 | 10-66023 | SCREW Comment: HOUSING PLATE TO DRIVE SHAFT HSG. (2") |
| 11 | 27-661021 | GASKET, PLATE TO DRIVE SHAFT HSG. PLATE |
| 14 | 26-60898 | SEAL, DRIVE SHAFT HOUSING PLATE |
| 15 | 43290A4 | PLATE ASSEMBLY, DRIVE SHAFT HOUSING |
| 16 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 17 | 17-23784 | DOWEL PIN, DRIVE SHAFT HOUSING PLATE |
| 18 | 27-62362 | GASKET Comment: MEGAPHONE TO DRIVE SHAFT HOUSING PLATE |
| 19 | 99699 | MEGAPHONE, EXHAUST |
| 20 | 10-60480 | SCREW Comment: MEGAPHONE TO DRIVE SHAFT HOUSING PLATE (1 1/8") |
| 21 | 12-8M0204649 | WASHER, MEGAPHONE SCREW |
| 22 | 12-20553 | WASHER, POWERHEAD STUD |
| 23 | 11-82671013 | NUT, POWERHEAD STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 2 | 11-52901 | NUT Comment: FLYWHEEL (PART OF A-436-6646A2 CRANKSHAFT ASSEMBLY) |
| 3 | 12-33001 | WASHER, FLYWHEEL NUT |
| 4 | 225-2494A37 | FLYWHEEL ASSEMBLY, COMPLETE Comment: UNITED STATES 5168574 AND UP AUSTRALIA 8056945 AND UP CANADA 7123763 AND UP |
| 5 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL (5/8") |
| 6 | 10-68997 | SCREW, PLATE/HUB TO FLEX. PLATE |
| 7 | 17-26618 | PIN, DOWEL - PULLEY TO FLYWHEEL |
| 8 | 29788 | FLANGE, FLYWHEEL PULLEY |
| 9 | 30306 | PULLEY, FLYWHEEL |
| 10 | 29787 | HUB, FLYWHEEL PULLEY |
| 11 | 398-4793 | STATOR, ALTERNATOR |
| 12 | 10-75840 | SCREW, STATOR TO UPPER END CAP (7/8") |
| 13 | 54-22627 | CLIP Comment: STATOR/WIRING HARNESS LEADS FASTENING (1/2") |
| 14 | 10-62568 | SCREW, STATOR LEAD CLIP FASTENING (3/8") |
| 15 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 66530A2 | FUEL PUMP ASSEMBLY |
| 2 | 21-30430A7 | CHECK VALVE ASSEMBLY |
| 3 | 89031A1 | DIAPHRAGM ASSEMBLY |
| 8 | 35-59072 | SCREEN, FILTER-INLET |
| 9 | 23004 | RETAINER, CHECK VALVE |
| 10 | 10-43725 | SCREW, RETAINER TO FUEL PUMP ( 1/4") |
| 12 | 35-91078A1 | COVER, FUEL INLET |
| 13 | 10-37370 | SCREW, COVER TO FUEL PUMP (5/8") |
| 14 | 22-19688 | FITTING, FUEL OUTLET |
| 15 | 10-66686 | SCREW, FUEL PUMP TO BASE (1") |
| 16 | 66575 | BASE, FUEL PUMP |
| 17 | 10-66687 | SCREW, FUEL PUMP TO BOTTOM COWL (1 1/2") |
| 18 | 22-19688 | FITTING, PULSE LINE (90 DEG.) |
| 19 | 24-68434 | SPRING, PLUSE LINE |
| 20 | 10-70732 | PULSE LINE (3 1/4") |
| 21 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 22 | 22-19688 | FITTING, PULSE LINE TO TRANSFER COVER (90 DEG.) |
| 23 | 32-8M0108355 | FUEL LINE, ADAPTOR TO FUEL PUMP (6 3/4") |
| 24 | 22-63981 | ELBOW, FUEL LINE TO ADAPTOR |
| 25 | 32-8M0108355 | FUEL LINE Comment: FUEL PUMP TO UPPER CARBURETOR (15 3/4") |
| 26 | 54-22627 | CLIP,FUEL LINE ATTACHING |
| 27 | 10-62568 | SCREW, FUEL LINE CLIP (3/8") |
| 28 | 8M0084613 | "D" WASHER, FUEL LINE CLIP SCREW |
| 29 | 22-66328 | FITTING, TEE-UPPER CARBURETOR |
| 30 | 22-64706001 | FITTING, TEE-CENTER CARBURETOR |
| 31 | 22-19688 | FITTING, ELBOW-LOWER CARBURETOR |
| 32 | 32-8M0108355 | FUEL LINE, CARBURETOR TO CARBURETOR (6 1/4") |
| 33 | 22833 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 34 | 23069 | STEM, CHECK UNIT ADAPTOR |
| 35 | 24-23067T | SPRING, ADAPTOR STEM |
| 36 | 25-16524 | "O" RING, ADAPTOR STEM |
| 37 | 30188 | CUP WASHER, ADAPTOR |
| 38 | 10-69029 | SCREW, ADAPTOR TO BOTTOM COWL (1 3/4") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-55682A1 | SEAL REPAIR KIT |
| 1 | 1655-7333T23 | GEAR HOUSING ASS'Y Comment: UNITED STATES 5168574 AND UP AUSTRALIA 8056945 AND UP CANADA 7123763 AND UP |
| 1A | 22-85822A10 | CONNECTOR ASSEMBLY, SPEEDOMETER Comment: UNITED STATES 5168574 AND UP AUSTRALIA 8056945 AND UP CANADA 7123763 AND UP |
| 2 | 17-8M0084726 | DOWEL PIN, GEAR HOUSING LOCATING |
| 3 | 16-77169 | STUD Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING (9") - EXTRA LONG |
| 4 | 16-74730 | STUD Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING (7 1/16") - EXTRA LONG SHAFT |
| 5 | 16-8M0034463 | STUD Comment: WATER PUMP BASE AND BODY TO GEAR HOUSING (3 3/8") |
| 6 | 16-306671 | STUD Comment: WATER PUMP BASE AND BODY TO GEAR HOUSING (3 18") |
| 7 | 31-32898T | BEARING, ROLLER - DRIVE SHAFT |
| 8 | 45-42645 | DRIVE SHAFT (EXTRA LONG SHAFT) |
| 9 | 43-68548T3 | GEAR, PINION - DRIVE SHAFT |
| 10 | 11-35921 | NUT, PINION GEAR TO DRIVE SHAFT |
| 11 | 15-57007A1 | SHIM, BALL BEARING TO BASE |
| 12 | 31-69220T | ROLLER BEARING, DRIVE SHAFT |
| 14 | 27-8M0214962 | GASKET, WATER PUMP BASE |
| 15 | 25-8M0214923 | "O"RING, WATER PUMP BASE |
| 16 | 46-96146A5 | WATER PUMP BASE ASSEMBLY |
| 17 | 26-94038 | OIL SEAL, WATER PUMP BASE |
| 18 | 26-16977 | OIL SEAL, WATER PUMP BASE |
| 19 | 17-35973 | DOWEL PIN Comment: WATER PUMP BASE TO WATER PUMP BODY |
| 20 | 27-8M0090319 | GASKET, LOWER Comment: WATER PUMP BASE TO FACE PLATE |
| 21 | 8M0204677 | PLATE, FACE Comment: WATER PUMP BASE TO WATER PUMP BODY |
| 22 | 27-858524 | GASKET, UPPER Comment: FACE PLATE TO WATER PUMP BODY |
| 23 | 46-96148T1 | WATER PUMP BODY ASSEMBLY |
| 24 | 48752T | INSERT, WATER PUMP BODY |
| 26 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 27 | 47-89984T4 | IMPELLER, WATER PUMP |
| 28 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 29 | 10-30720 | SCREW Comment: WATER PUMP BODY TO GEAR HOUSING (2 1/4") |
| 30 | 13-26992 | LOCKWASHER, WATER PUMP BODY SCREW |
| 31 | 12-8M0204649 | WASHER Comment: WATER PUMP BODY FASTENING SCREW AND STUD |
| 32 | 11-35888 | NUT, WATER PUMP FASTENING SCREW |
| 33 | 12-36001 | WASHER, WATER PUMP BODY FASTENING STUD |
| 34 | 11-82670911 | NUT, WATER PUMP BODY FASTENING STUD |
| 35 | 25-8M0214918 | RING Comment: RUBBER - CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 36 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 37 | 37641001 | SEAL, EXHAUST ELBOW |
| 38 | 38051 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 39 | 76062A1 | SHAFT ASSEMBLY, SHIFT - LOWER Comment: (LONG SHAFT) |
| 40 | 53-29641 | "E"RING, RETAINING - SHIFT SHAFT |
| 41 | 25-25439 | "O"RING, SHIFT SHAFT BUSHING |
| 42 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 43 | 26-8M0204708 | OIL SEAL, SHIFT SHAFT BUSHING |
| 44 | 12-77674 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 45 | 78036 | SPACER Comment: LOWER - REVERSE LOCKING NOT USED WITH FULL POWER TRIM |
| 46 | 43308T1 | CAM Comment: REVERSE LOCKING NOT USED WITH FULL POWER TRIM |
| 47 | 22-8M0058389 | PLUG, DRAIN (MAGNETIC) |
| 48 | 12-191833 | WASHER Comment: GREASE FILLER AND VENT HOLE SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1655-7333T23 | GEAR HOUSING ASS'Y Comment: UNITED STATES 5168574 AND UP AUSTRALIA 8056945 AND UP CANADA 7123763 AND UP |
| 49 | 760394 | CAM, SHIFT Comment: UNITED STATES 5168574 AND UP AUSTRALIA 8056945 AND UP CANADA 7123763 AND UP |
| 50 | 30625 | FOLLOWER, CAM |
| 51 | 30624 | SLIDE, CROSS PIN |
| 52 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 53 | 15-30923A1 | SHIM Comment: BEARING OUTER RACE TO HOUSING (.002-3-5-10) |
| 54 | 31-30894A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 55 | 31-30895T | BEARING, ROLLER - FORWARD GEAR |
| 56 | 43-68447T1 | FORWARD GEAR |
| 57 | 52-822539T | RATCHET, SLIDING GEAR |
| 58 | 17-8M0100263 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 59 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 60 | 44-93003 | SHAFT, PROPELLER |
| 61 | 43-76250T | REVERSE GEAR |
| 62 | 12-76358 | WASHER Comment: THRUST - BEARING CARRIER TO GEAR HOUSING |
| 63 | 25-29976 | "O"RING, BEARING CARRIER |
| 64 | 41529T2 | BEARING CARRIER ASSEMBLY |
| 65 | 31-30956T | BEARING ROLLER - BEARING CARRIER |
| 66 | 26-8M0204670 | OIL SEAL, BEARING CARRIER |
| 67 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 68 | 14-52700 | TAB WASHER, GEAR HOUSING COVER |
| 69 | 52699 | COVER, GEAR HOUSING |
| 70 | 97-31640Q4 | TRIM TAB, GEAR HOUSING |
| 71 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 72 | 12-45176 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 73 | 11-8M0204653 | NUT Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 74 | 10-74727 | SCREW Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING (6") - EXTRA LONG |
| 75 | 13191Q01 | THRUST HUB AND WASHER ASSEMBLY |
| 76 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 77 | 11-52707Q1 | NUT, PROPELLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 25-48171 | "O" RING Comment: PUMP TO MANIFOLD PLATE (SEE REFERENCE #2) |
| 1 | 92975A32 | HYDRAULIC PUMP ASSEMBLY |
| 2 | 25-48171 | "O" RING, HYDRAULIC PUMP TO MANIFOLD PLATE |
| 3 | 10-79953Q04 | SCREW, FILLER - HYDAULIC PUMP |
| 4 | 12-191833 | WASHER Comment: SEALING - HYDRAULIC PUMP FILLER SCREW |
| 5 | 10-62269 | SCREW, VENT - HYDRAULIC PUMP |
| 7 | 32979 | BATTERY LEAD (POSITIVE) |
| 8 | 32988 | BATTERY LEAD (NEGATIVE) |
| 9 | 45336 | PLATE, MANIFOLD |
| 10 | 45197A2 | CONTROL VALVE ASSEMBLY |
| 11 | 25-45254 | "O" RING Comment: CONTROL VALVE TO MANIFOLD PLATE (3/4"O.D.) |
| 12 | 25-48171 | "O" RING Comment: CONTROL VALVE TO MANIFOLD PLATE (1/2" O.D.) |
| 13 | 25-45253 | "O" RING Comment: CONTROL VALVE TO MANIFOLD PLATE (5/8" O.D.) |
| 14 | 10-56500 | SCREW Comment: VALVE AND MANIFOLD PLATE TO PUMP (1 1/4") |
| 15 | 13-26992 | LOCKWASHER Comment: CONTROL VALVE AND MANIFOLD PLATE SCREW |
| 17 | 22-46008 | PLUG, CONTROL VALVE (1/2-20") |
| 18 | 84-74023A1 | CONNECTOR AND HARNESS |
| 22 | 45377T | BRACKET Comment: MOUNTING - HYDRAULIC PUMP TO BOAT |
| 23 | 10-35386 | SCREW Comment: MOUNTING BRACKET TO HYDAULIC PUMP (1") |
| 24 | 13-39107 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 25 | 11-21908 | NUT, MOUNTING BRACKET SCREW |
| 26 | 10-68298 | BOLT, HYDRAULIC PUMP TO BOAT (3 1/4") |
| 27 | 11-82670912 | NUT, HYDRAULIC PUMP BOLT |
| 28 | 89-853654A1 | STARTER SOLENOID |
| 29 | 13-26996,10,10 | LOCKWASHER Comment: STARTER SOLENOID TERMINAL |
| 30 | 10,11-68219 | NUT, STARTER SOLENOID TERMINAL |
| 31 | 13-8M0204647 | LOCKWASHER Comment: STARTER SOLENOID TERMINAL (5/16") |
| 32 | 11-8M0204668 | NUT, STARTER SOLENOID TERMINAL (5/16") |
| 33 | 46265 | BOOT, RUBBER - STARTER SOLENOID TERMINAL |
| 34 | 74407T | BRACKET, MOUNTING - STARTER SOLENOID |
| 35 | 10-21140 | SCREW Comment: MOUNTING BRACKET TO HYDRAULIC PUMP (1/2") |
| 36 | 13-26992 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 37 | 11-24656 | NUT Comment: MOUNTING BRACKET TO HYDRAULIC PUMP THRU BOLT |
| 38 | 269011 | BUMPER, RUBBER - SOLENOID BRACKET |
| 39 | 55992 | BATTERY LEAD (NEGATIVE) |
| 40 | 74406 | BRACKET, MOUNTING - STARTER SOLENOID |
| 41 | 10-69028 | SCREW Comment: MOUNTING BRACKET TO HYDRAULIC PUMP (3/4") |
| 42 | 13-26992 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 43 | 10-34290 | SCREW Comment: STARTER SOLENOID TO MOUNTING BRACKET (5/8") |
| 44 | 13-26992 | LOCKWASHER, STARTER SOLENOID SCREW |
| 45 | 11-21825 | NUT, STARTER SOLENOID SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92975A32 | HYDAULIC PUMP ASSEMBLY, COMPLETE |
| 1 | 25-48171 | "O" RING, HYDRAULIC PUMP |
| 2 | 392-7734 | VALVE BODY AND GEAR ASSEMBLY |
| 3 | 392-2618 | CAN, VALVE BODY |
| 4 | 10-20411 | SCREW, VALVE BODY TO RESERVOIR |
| 5 | 392-7735 | SEAL, RESERVOIR TO VALVE BODY AND GEAR |
| 6 | 392-2939 | RESERVOIR ASSEMBLY |
| 7 | 10-62269 | SCREW, VENT - HYDAULIC PUMP |
| 8 | 10-79953Q04 | SCREW, FILLER - HYDAULIC PUMP |
| 9 | 12-191833 | WASHER, SEALING - FILLER SCREW |
| 10 | 392-2623 | WASHER, THRUST - ARMATURE |
| 11 | 392-2943 | ARMATURE, FIELD AND FRAME |
| 12 | 392-2942 | FIELD AND FRAME ASSEMBLY |
| 13 | 392-2944 | BALL, COMMUTATOR END PLATE |
| 14 | 392-2940 | PLATE ASSEMBLY, COMMUTATOR END |
| 15 | 392-8989 | BRUSH SET, COMMUTATOR END PLATE |
| 16 | 392-2529 | SPRING SET, BRUSH TENSION |
| 17 | 392-2938 | BOLT SET Comment: THRU - PLATE AND FRAME TO RESERVOIR |
| 18 | 13-26996 | LOCKWASHER, THRU BOLT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-4895T2 | IGNITION COIL ASSEMBLY |
| 2 | 72015 | PAD, RUBBER - IGNITION COIL |
| 3 | 63195 | COVER, IGNITION COIL |
| 4 | 10-88856 | SCREW, COIL TO CYLINDER BLOCK (2") |
| 5 | 12-30164 | WASHER, COIL SCREW |
| 6 | 84-60466A1 | CABLE ASSEMBLY |
| 7 | 10,11-45076 | NUT, IGNITION COIL TERMINAL |
| 8 | 84-66054A2 | CABLE ASSEMBLY, COIL TO SWITCH BOX |
| 9 | 10-62568 | SCREW, IGNITION COIL WIRE TO SWITCH BOX (3/8") |
| 10 | 69190 | PLATE, COIL MOUNTING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-12832A87 | DECAL SET - SERIAL GROUP #4 |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 64507A1 | REPAIR KIT |
| 12 | 64505A1 | RETAINER ASSEMBLY, PISTON |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 48-77350A45 | PROPELLER ASSEMBLY (ALUMINUM)(PITCH 23") Comment: 3 BLADES |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 84-69236A1 | WIRING HARNESS, INTERNAL |
| 3 | 54-76368 | CLAMP, WIRING HARNESS TO BOTTOM COWL |
| 4 | 10-690201 | SCREW Comment: WIRING HARNESS CLAMP TO BOTTOM COWL (7/8") |
| 5 | 13-26996 | LOCKWASHER, WIRING HARNESS CLAMP SCREW |
| 6 | 12-30164 | WASHER, WIRING HARNESS CLAMP SCREW |
| 7 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 8 | 10-98256 | SCREW, GROUND WIRE TO BOTTOM COWL |
| 9 | 13-26992 | LOCKWASHER, GROUND WIRE SCREW |
| 10 | 54-648552 | CLIP, STATOR LEADS TO BLOCK (1/8") |
| 11 | 10-62568 | SCREW Comment: WIRING HARNESS TO FRONT BRACKET (3/8") |
| 12 | 8M0084613 | "D" WASHER, WIRING HARNESS CLIP SCREW |
| 13 | 45559 | TERMINAL BLOCK, STATOR LEADS |
| 14 | 10-62568 | SCREW, STATOR LEADS TO TERMINAL BLOCK (3/8") |
| 15 | 332-2986A21 | SWITCH BOX ASSEMBLY |
| 16 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 17 | 10-29794 | SCREW, SWITCH BOX (3/8") |
| 18 | 10-64279 | SCREW Comment: SWITCH BOX TO FRONT MOUNTING BRACKET (3/4") |
| 19 | 11-8M0207775 | NUT, SWITCH BOX SCREW |
| 20 | 84-93389A12 | CABLE, WIRE Comment: STARTER MOTOR TO FRONT SUPPORT BRACKET |
| 21 | 10-69035 | SCREW, WIRE CABLE TO STARTER MOTOR |
| 22 | 8M0043376 | STOP, RUBBER - STARTER MOTOR |
| 23 | 23-56774 | SPACER, COLLAR TO TOP MOUNTING CAP |
| 24 | 23-8M0034918 | COLLAR, RUBBER - STARTER MOTOR MOUNT |
| 25 | 50-898265010 | STARTER MOTOR ASSEMBLY |
| 26 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 27 | 11-64015 | NUT, STARTER MOTOR TERMINAL |
| 28 | 89-853654A1 | SOLENOID, STARTER |
| 29 | 10-38601 | SCREW, SOLENOID TO BOTTOM COWL (5/8") |
| 30 | 13-26992 | LOCKWASHER Comment: STARTER SOLENOID FASTENING SCREW |
| 31 | 269011 | BUMPER, RUBBER - STARTER SOLENOID |
| 32 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 33 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 34 | 84-93388A8 | CABLE, WIRE - STARTER MOTOR TO SOLENOID |
| 35 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 36 | 11-8M0204668 | NUT, SOLENOID TERMINAL (5/16") |
| 37 | 46265 | BOOT, SOLENOID TERMINAL |
| 38 | 8M0058226 | RECTIFIER ASSEMBLY |
| 39 | 10-37656 | SCREW, RECITIFIER TO FRONT BRACKET (5/8") |
| 42 | 11-45076 | NUT, STATOR LEADS TO RECITIFIER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1482-6386A4 | SWIVEL BRACKET ASSEMBLY |
| 2 | 23-69132 | BUSHING, REVERSE LOCK PIVOT SHAFT |
| 3 | 23-69341 | BUSHING, SWIVEL BRACKET |
| 4 | 12-69342 | WASHER, SWIVEL PIN - UPPER |
| 5 | 26-37448 | OIL SEAL, SWIVEL BRACKET |
| 6 | 10-47828 | SCREW, DRIVE - SWIVEL BRACKET |
| 7 | 22-8M0169589 | FITTING, GREASE - SWIVEL BRACKET |
| 10 | 12-37429 | WASHER, SWIVEL PIN - LOWER |
| 11 | 28205T | STRAP STOP Comment: DRIVE SHAFT HOUSING TO SWIVEL BRACKET |
| 12 | 10-28200 | SCREW Comment: STRAP STOP TO DRIVE SHAFT HOUSING (2 7/8") |
| 13 | 11-25269 | NUT, STRAP STOP FASTENING SCREW |
| 14 | 17-73593A2 | SWIVEL PIN AND ARM ASSEMBLY |
| 15 | 73984T | YOKE, BOTTOM |
| 16A | 53-73591 | RETAINING RING, BOTTOM YOKE ATTACHING |
| 17 | 28203 | BUMPER, STEERING ARM |
| 18 | 10-49554 | BOLT, STEERING ARM TO UPPER MOUNT (5 7/8") |
| 19 | 11-8M0204653 | NUT, STEERING ARM BOLT FASTENING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2114-7934T | TOP (WITHOUT DECALS) |
| 2 | 52733A9 | RETAINER ASSEMBLY, TOP COWL |
| 3 | 35496 | PAD, BUMPER - TP CPW: RETAOMER |
| 4 | 10-74824 | SCREW, RETAINER TO TOP COL (1 14") |
| 5 | 13-39107 | LOCKWASHER, RETAINER TO TOP COWL SCREW |
| 6 | 76370 | SHIELD, TOP COWL - REAR |
| 7 | 10-37370 | SCREW, SHIELD TO TOP COWL (5/8") |
| 8 | 13-37371 | LOCKWASHER, SHIELD SCREW |
| 9 | 47341A11 | ROPE, STARTER (FOR MANUAL STARTING ONLY |
| 10 | 52739 | HINGE, COWL LATCH - TOP COWL |
| 11 | 94918F1 | LEVER, COWL LATCH HINGE |
| 12 | 17-58998 | PIN, ROLL - COWL LATCH LEVER TO HINGE |
| 13 | 55455 | HOOK, TOP COWL LATCH - REAR |
| 14 | 10-22956 | SCREW. REAR HOOK TO TOP COWL (7/8") |
| 15 | 13-26992 | LOCKWASHER REAR HOOK MOUNTING SCREW |
| 16 | 79897A4 | FRAME ASSEMBLY, TOP COWL SUPPORT Comment: UNITED STATES 5168574 AND UP AUSTRALIA 8056945 AND UP CANADA 7123763 AND UP |
| 17 | 37-73291 | DECAL, TIMING (FLYWHEEL) |
| 18 | 46096 | MOUNT, RUBBER - TOP COWL FRAME (HEAVY DUTY) |
| 19 | 11-35888 | NUT, RUBBER MOUNT TO TOP COWL FRAME |
| 20 | 86472 | BRACKET, TOP COWL SUPPORT - REAR |
| 21 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 22 | 13-26992 | LOCWASHER Comment: RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 23 | 11-29598 | NUT Comment: RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 24 | 10-37562 | SCREW, REAR BRACKET TO FRAME (1") |
| 26 | 13-8M0204647 | LOCKWASHER, REAR BRACKET SCREW |
| 27 | 10-37562 | SCREW, REAR BRACKET TO BOTTOM COWL (1") |
| 28 | 13-8M0204647 | LOCKWASHER, REAR SUPPORT BRACKET SCREW |
| 29 | 42706A1 | BRACKET ASSEMBLY, TOP COWL - FRONT |
| 30 | 10-60411 | SCREW Comment: FRONT BRACKET TO BOTTOM COWL (1 1/4") |
| 31 | 13-26992 | LOCKWASHER Comment: FRNOT SUPPORT BRACKET SCREW |
| 32 | 10-55511 | SCREW Comment: FRONT BRACKET TO TOP COWL FRAME (11/2") |
| 33 | 13-8M0204647 | LOCKWASHER, FRONT BRACKET SCREW |
| 34 | 37640 | MOUNT, RUBBER FRONT SUPPORT BRACKET |
| 35 | 13-8M0204647 | LOCKWASHER Comment: RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 36 | 11-28770 | NUT Comment: RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 92194A14 | TRIM CYLINDER ASSEMBLY |
| 1A | 22-8M0169589 | GREASE FITTING |
| 2 | 10-45265 | SCREW, BLEED - SHOCK CYLINDER |
| 3 | 25-45016 | "O" RING, SHOCK CYLINDER BLEED SCREW |
| 4 | 10-45264 | SCREW Comment: SHOCK CYLINDER TO LOWER SHOCK PIN (1 9/16") |
| 5 | 23-45280 | SPACER, SHOCK CYLINDER - LOWER |
| 6 | 23-94907A1 | BUSHING, RUBBER - SHOCK CYLINDER |
| 7 | 89108A3 | BRACKET, MOUNTING - SHOCK CYLINDER (PORT) |
| 8 | 10-45263 | SCREW Comment: MOUNTING BRACKET TO UPPER SHOCK PIN (2 1/4") |
| 9 | 10-68298 | BOLT Comment: MOUNTING BRACKET TO BOAT TRANSOM (3 1/4") |
| 10 | 12-68410 | WASHER, MOUNTING BRACKET BOLT |
| 11 | 11-82670912 | NUT, MOUNTING BRACKET BOLT |
| 12 | 89807A1 | BRACKET ASSEMBLY Comment: MOUNTING - SHOCK CYLINDER (STARBOARD) |
| 13 | 26-70608 | OIL SEAL, STARBOARD MOUNTING BRACKET |
| 14 | 89290 | PLUNGER, LIMIT SWITCH ACTUATING |
| 15 | 24-95881 | SPRING, TENSION - LIMIT SWITCH PLUNGER |
| 16 | 16-45282 | STUD, MOUNTING BRACKET AND CLAMP BRACKET |
| 17 | 13-8M0204647 | LOCKWASHER Comment: MOUNTING BRACKET TO CLAMP BRACKET STUD |
| 18 | 11-28770 | NUT Comment: MOUNTING BRACKET TO CLAMP BRACKET STUD |
| 19 | 10-45328 | SCREW Comment: SHOCK CYLINDER TO MOUNTING BRACKET (3 9/16") |
| 20 | 12-37807 | WASHER Comment: SHOCK CYLINDER SCREW (STARBOARD ONLY) |
| 21 | 11-20696 | NUT, SHOCK CYLINDER SCREW |
| 22 | 24-24390 | SPRING, TENSION - ADJUSTING STUD |
| 23 | 16-8M0034461 | STUD, ADJUSTING - CUT-OUT LIMIT SWITCH (15/16") |
| 24 | 11-859124 | NUT, JAM - LIMIT SWITCH ADJUSTING STUD |
| 25 | 99897 | CAM, LIMIT SWITCH ADJUSTING STUD |
| 26 | 86967 | PLATE, RETAINING - LIMIT SWITCH CAM |
| 27 | 10-68513 | SCREW Comment: RETAINING PLATE AND CAM TO SHOCK CYLINDER (3/8") |
| 28 | 13-26996 | LOCKWASHER, RETAINING PLATE AND CAM SCREW |
| 29 | 45326A2 | SWITCH ASSEMBLY, CUT-OUT LIMIT |
| 30 | 23-45354 | BUSHING, RUBBER - CUT-OUT LIMIT SWITCH |
| 31 | 10-47255 | SCREW Comment: CUT-OUT LIMIT TO MOUNTING BRACKET (9/16") |
| 32 | 45287 | COVER, LIMIT SWITCH |
| 33 | 27-45275 | GASKET, LIMIT SWITCH COVER |
| 34 | 10-24942 | SCREW Comment: LIMIT SWITCH COVER TO MOUNTING BRACKET (7/16") |
| 35 | 87774A1 | COVER, INLET - TRANSOM |
| 36 | 27-45274 | GASKET, INLET COVER |
| 37 | 25-45507 | GROMMET, RUBBER - INLET COVER |
| 38 | 10-32866 | SCREW, INLET COVER TO BOAT (2") |
| 39 | 12-20878 | WASHER, INLET COVER SCREW |
| 40 | 11-8M0204718 | NUT, INLET COVER SCREW |
| 41 | 32-88005 | HOSE, TRIM Comment: CYLINDER TO CONTROL VALVE (5') - 13-32" O.D. |
| 42 | 32-88006 | HOSE, LIFT Comment: CYLINDER TO CONTROL VALVE (5') - 17/32" O.D. |
| 43 | 23-35977 | GROMMET Comment: RUBBER - LIFT HOSE AND TRIM HOSE |
| 44 | 73519A1 | TILT STOP |
| 45 | 69259 | TUBE, MOUNTING - TILT STOP |
| 46 | 77669 | PIN, MOUNTING TUBE |
| 47 | 18-36002 | COTTER PIN, MOUNTING TUBE PIN |
Regular maintenance keeps your Mercury 1150, 115 running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
