Images
Product
Price
Qty
Options
- $28.99
- $28.99
- Unit price
- per
- $31.00
$36.00- $31.00
- Unit price
- per
- $20.99
- $20.99
- Unit price
- per
- $30.00
$41.00- $30.00
- Unit price
- per
- $15.49
- $15.49
- Unit price
- per
- $20.24
- $20.24
- Unit price
- per
Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
OEM and aftermarket replacement parts for Mercury 115 (4 CYL.). Scroll down for exploded parts diagrams (37), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 115 (4 CYL.) Reference Library — Exploded parts diagrams (37 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 115 (4 CYL.) is a 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve outboard motor. Powers center-console boats, larger pontoons, and offshore-capable fishing craft.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve |
| Horsepower | 115 HP |
| Displacement | 2100 cc (2.1L) |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK SILZKR7B11 |
| Engine Oil Capacity | 5.0 L (5.28 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | 24 fl oz (710 mL) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 115 (4 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 115 (4 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| 0 | 858566A1 | FLUSH KIT, Coastal |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 27-151724 | GASKET |
| 2 | 44342A1 | COVER |
| 3 | 19-815784 | CAP |
| 4 | NSS | NOT SOLD SEPARATE, Decal-Timing |
| 5 | NSS | NOT SOLD SEPARATE, Decal-Caution Airbox |
| 6 | 10-878609 | SCREW, (#10-16 x .600) |
| 7 | 27-828479 | GASKET |
| 8 | 44340A2 | PLATE ASSEMBLY, Attenuator |
| 9 | 10-42975 | DRIVE SCREW |
| 10 | 12-4002217 | WASHER |
| 11 | 11-826365 | NUT |
| 12 | 39519 | CUP |
| 13 | 98889 | LATCH |
| 14 | 32-9912878 | HOSE, (.187) (26.00 Inches Bulk) Comment: (Cut to 1.50 Inch Length) |
| 15 | 32-9912878 | HOSE, (.187) (26.00 Inches Bulk) Comment: (Cut to 3.25 Inch Length) |
| 16 | 8M0214940 | TIE STRAP, (5.50 Inches) |
| 17 | 22-830285 | FITTING TEE |
| 18 | 32-9912878 | HOSE, (.187) (26.00 Inches Bulk) Comment: (Cut to 5.25 Inch Length) |
| 19 | 825203T | LINK, Throttle, Main |
| 20 | 193859 | LINK ROD |
| 21 | 11399A1 | ARM ASSEMBLY |
| 22 | 10-40056103 | SCREW, (M5 x 6) |
| 23 | 12-8M0204666 | WASHER, (.203 x .500 x .032) |
| 24 | 67748 | ROLLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 17791T97 | POWERHEAD ASSEMBLY |
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 9.00 Inch Length) |
| 2 | 22-59169003 | FITTING, Tee |
| 3 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 9.00 Inch Length) |
| 4 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 4.50 Inch Length) |
| 5 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 6 | 21-149126 | CHECK VALVE |
| 7 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 8 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 9 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 4.50 Inch Length) |
| 10 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 11 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 12 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 13 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 6.00 Inch Length) |
| 14 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 1.50 Inch Length) |
| 15 | 22-15133 | FITTING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 100-8M0107327 | BOTTOM COWL ASSEMBLY, Starboard |
| 2 | 25-822556003 | GROMMET |
| 3 | 8M0109216 | SEAL, (36.00 Inches) |
| 4 | 100-8M0107328 | BOTTOM COWL ASSEMBLY, Port |
| 5 | 25-822555001 | GROMMET |
| 6 | 8M0109216 | SEAL, (36.00 Inches) |
| 7 | 8560552 | SEAL |
| 8 | 87-8M0042301 | SWITCH ASSEMBLY |
| 9 | 22-813613 | FITTING |
| 10 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) Comment: (Cut Length - 28 Inches) |
| 11 | 21-817519A2 | CHECK VALVE ASSEMBLY, Drain |
| 12 | 10-82130040 | SCREW, (M6 x 40) |
| 13 | 8M0041366 | HANDLE |
| 14 | 23-812707 | BUSHING |
| 15 | 13-F2047 | WASHER, Wave |
| 16 | 8M0001081 | CAM, Latch Shaft |
| 17 | 12-8M0214930 | WASHER |
| 18 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 19 | 10-28635 | SCREW, (.250-20 x .620) Stainless Steel |
| 20 | 822363T1 | RETAINER |
| 21 | 11-401386 | NUT, (M6) Stainless Steel |
| 22 | 12-8M0214930 | WASHER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 3301-884587T10 | CARBURETOR, (125-WME 112-4) |
| 2 | NSS | NOT SOLD SEPARATE, Gasket-Fuel Bowl |
| 3 | NSS | NOT SOLD SEPARATE, Retaining Ring |
| 4 | 1395-811693 | BOWL, Fuel |
| 5 | 1395-823632 | SHAFT, Throttle Comment: (WME-1/3/4) |
| 6 | 1395-8236321 | SHAFT, Throttle Comment: (WME-2) |
| 7 | 1395-8087461 | LEVER, Throttle Comment: (WME-79/80/81-1/3/4) |
| 8 | 1395-97244 | VALVE, Throttle Comment: (WME-79/80) |
| 9 | 1395-9594 | FLOAT |
| 10 | F10064 | SHAFT |
| 11 | 10-95951 | VALVE, Inlet Needle |
| 12 | 1395-811694 | PLUG KIT |
| 13 | 1395-802731 | SEAL (CONSISTS OF 4 SEALS) |
| 14 | NSS | NOT SOLD SEPARATE, Gasket-Cover Plate |
| 15 | 27-151724 | GASKET |
| 16 | 10-F10155 | SCREW, Throttle Valve |
| 17 | 1395-811220 | SCREW, Cover Plate |
| 18 | 1395-808612 | SCREW AND WASHER, (#8-32 x .750) |
| 19 | 1395-811221 | COVER PLATE |
| 20 | 1399-3796 | JET, (.076) Comment: (WME-90-3/4)(WME-112-3/4)(125) |
| 21 | 1395-808738 | GASKET |
| 22 | NSS | NOT SOLD SEPARATE, Spring-Idle Needle |
| 23 | NSS | NOT SOLD SEPARATE, Spring-Throttle Return |
| 24 | NSS | NOT SOLD SEPARATE, Idle Needle |
| 25 | 1395-823634 | SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 56-52148A7 | CO-PILOT ASSEMBLY |
| 1 | 521481 | PILOT ROD |
| 2 | 11-8M0103848 | NUT ASSEMBLY |
| 3 | 10-56500 | SCREW, (.250-28 x 1.250) |
| 4 | 12-77674 | WASHER |
| 5 | 821621 | KNOB, Prong |
| 6 | 873491 | ROD |
| 7 | 23-521512 | BUSHING |
| 8 | 12-8M0042642 | WASHER, (.323 x .563 x .063) Stainless Steel |
| 9 | 11-826709111 | NUT, (.312-24) Stainless Steel |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 17791T97 | POWERHEAD ASSEMBLY |
| 1 | 473-9193T5 | CRANKSHAFT ASSEMBLY |
| 2 | 43-43019A1 | GEAR ASSEMBLY |
| 3 | 30-43011T | BEARING, Ball, Lower |
| 4 | 28-91800 | KEY, Woodruff |
| 5 | 786611 | WEAR SLEEVE |
| 6 | 25-35126 | O-RING, (.859 x .139) |
| 7 | 39-818412A4 | RING ASSEMBLY |
| 8 | 42943A1 | BEARING ASSEMBLY, Roller |
| 9 | NSS | NOT SOLD SEPARATE, Roller Bearing |
| 10 | 2704-821896A4 | PISTON ASSEMBLY Comment: (.030 O.S.) |
| 11 | NSS | NOT SOLD SEPARATE |
| 12 | 53-857196 | LOCK RING |
| 13 | 39-822321A2 | RING SET, Piston Comment: (.030 O.S.) |
| 14 | 646-818846T6 | CONNECTING ROD ASSEMBLY |
| 15 | 12-8M0012298 | WASHER |
| 16 | 29-8M0214954 | BEARING, Needle |
| 17 | 10-94320 | SCREW, (.375-24 x 1.250) |
| 18 | 31-844338A01 | BEARING ASSEMBLY |
| 19 | NSS | NOT SOLD SEPARATE, Roller Bearing |
| 20 | 31-43013T3 | BEARING ASSEMBLY, Roller, Upper |
| 21 | 26-8M0214932 | SEAL, Oil |
| 22 | 25-823683 | O-RING, (1.989 x .070) Comment: (1.989 X .070 Round) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 17791T97 | POWERHEAD ASSEMBLY |
| 1 | 877-9191T24 | CYLINDER BLOCK |
| 2 | 10-4009680 | SCREW, (M10 x 80) |
| 3 | 17-8M0036405 | PIN (BEARING RACE) |
| 4 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 5 | 428841 | COVER (TOP) |
| 6 | 76867 | COVER (BOTTOM) |
| 7 | 10-81742750 | SCREW, (M8 x 50) |
| 8 | 65848 | CARRIER |
| 9 | 25-64872 | GROMMET |
| 10 | 813801A1 | CARRIER ASSEMBLY |
| 11 | 21-42657A3 | CHECK VALVE |
| 12 | 21-891664 | CHECK VALVE |
| 13 | 16-821676A1 | STUD KIT (M10) |
| 14 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 15 | 11-40140 | NUT, (M10) |
| 16 | 21-426233 | CHECK VALVE (Press-In) |
| 17 | 824703A1 | PLUG KIT |
| 18 | NSS | NOT SOLD SEPARATE, Plug |
| 19 | 12-8M0204666 | WASHER, (.203 x .500 x .032) |
| 20 | 10-82127335 | SCREW, (M8 x 35 MM) |
| 21 | 99162001 | BOOT |
| 22 | 1035-9196A2 | COVER |
| 23 | 27-443284 | GASKET |
| 24 | 10-82127335 | SCREW, (M8 x 35 MM) |
| 25 | 54-814634 | CLAMP |
| 26 | 787992 | SENDER, Temperature |
| 27 | 889733 | RETAINER |
| 28 | 10-878609 | SCREW, (#10-16 x .600) |
| 29 | 86596T | POPPET VALVE |
| 30 | 648771 | DIAPHRAGM |
| 31 | 12-94182 | WASHER |
| 32 | 10-69570 | SCREW, (#10-16 x .750) |
| 33 | 24-42996 | SPRING, (Stainless Steel) |
| 34 | 14586 | THERMOSTAT |
| 35 | 27-8M0204714 | GASKET |
| 36 | 27-430068 | GASKET |
| 37 | 8M0047619 | COVER |
| 38 | 10-81742755 | SCREW, (M8 x 55) |
| 39 | 22-328022 | PLUG, Pipe (.125-27) Brass |
| 40 | 16-8161949 | STUD, (M6 x 44) |
| 41 | 12-8M0204663 | WASHER, (.187 x .500 x .062) Neoprene |
| 42 | 11-816872 | WING NUT |
| 43 | 821889A51 | REV LIMITER |
| 44 | 10-82130030 | SCREW, (M6 x 30) |
| 45 | 84-855212A1 | HARNESS ASSEMBLY, Adaptor |
| 46 | 22-857175 | COUPLING INSERT Comment: (Coastal/Saltwater) |
| 47 | 22-857176 | COUPLING BODY Comment: (Coastal/Saltwater) |
| 48 | 19-858240 | CAP Comment: (Coastal/Saltwater) |
| 49 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) Comment: (Coastal/Saltwater) |
| 50 | 54-816311T | TIE STRAP, (8.00 Inches) Comment: (Coastal/Saltwater) |
| 51 | 22-857219 | FITTING Comment: (Coastal/Saltwater) |
| 52 | 22-286241 | FITTING Comment: (Coastal/Saltwater) |
| 53 | 54-850181 | TIE STRAP, (11.750 Inches) |
| 54 | NSS | NOT SOLD SEPARATE, Decal-Serialization |
| 55 | NSS | NOT SOLD SEPARATE, Decal-Serial Overlaminate |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1598-8974A26 | HOUSING ASSEMBLY, Driveshaft Comment: (Jet) |
| 2 | 16-9035015 | STUD, (M10 x 227) Comment: (X-Long) |
| 3 | 17-23784 | PIN, Dowel |
| 4 | 16-8M0034462 | STUD, (M10 x 190) Comment: (X-Long) |
| 5 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 6 | 11-40140 | NUT, (M10) |
| 7 | 12092A3 | SPACER KIT Comment: (X-Long) |
| 8 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) Comment: (X-Long) |
| 9 | 22-85822A4 | PICKUP ASSEMBLY, Speedometer |
| 10 | 22-433351 | CONNECTOR, 90 Degree (.125-27) Nylon |
| 11 | 22-85822T | CONNECTOR, Straight |
| 12 | 44343T1 | MOUNT |
| 13 | 10-898835001 | BOLT, (M12 x 154) |
| 14 | 12-30119 | WASHER, (.875 Inch Outside Diameter) |
| 15 | 11-8M0204662 | NUT, (M12) |
| 16 | 88238A10 | CABLE ASSEMBLY, Ground |
| 17 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel |
| 18 | 8M0036730 | CLAMP |
| 19 | 11-35521 | NUT |
| 20 | 10-4010725 | SCREW, (M8 x 25) |
| 21 | 100-8M4500752 | COVER, Black |
| 22 | 10-88417 | SCREW, (#12-24 x .620) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1598-881913T02 | HOUSING ASSEMBLY, Driveshaft Comment: (Jet) |
| 2 | 16-9035015 | STUD, (M10 x 227) Comment: (X-Long) |
| 3 | 16-8M0034462 | STUD, (M10 x 190) Comment: (X-Long) |
| 4 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| 5 | 11-40140 | NUT, (M10) |
| 6 | 22-85822A4 | PICKUP ASSEMBLY, Speedometer |
| 7 | 22-433351 | CONNECTOR, 90 Degree (.125-27) Nylon |
| 8 | 22-85822T | CONNECTOR, Straight |
| 9 | 881916 | MOUNT |
| 10 | 10-898835001 | BOLT, (M12 x 154) |
| 11 | 12-30119 | WASHER, (.875 Inch Outside Diameter) |
| 12 | 11-8M0204662 | NUT, (M12) |
| 13 | 88238A10 | CABLE ASSEMBLY, Ground |
| 14 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel |
| 15 | 8M0036786 | CLAMP |
| 16 | 11-35521 | NUT |
| 17 | 10-889833025 | SCREW, (M8 x 25 MM) |
| 18 | 100-8M4500754 | COVER |
| 19 | 10-88417 | SCREW, (#12-24 x .620) |
| 20 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 21 | 12-881976 | WASHER, Neoprene |
| 22 | 12092A3 | SPACER KIT Comment: (X-Long) |
| 23 | 17-8M0084244 | PIN, Dowel - With Hole (.375 x .625) (With Hole) Comment: (X-Long)(Front) |
| 24 | 892214 | PLATE WASHER |
| 25 | 19-8M0026580 | PLUG, Driveshaft Housing |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 8327531 | PLATE, Electrical |
| 2 | 10-40011150 | SCREW, (M8 x 30) Stainless Steel |
| 3 | 12-49436 | WASHER |
| 4 | 23-8502341 | BUSHING |
| 5 | 25-833155 | GROMMET |
| 6 | 10-82239312 | SCREW, (M5 x 12) |
| 7 | 12-89302 | WASHER, (.203 x .406 x .040) |
| 8 | 8261151 | CLAMP, Connector |
| 9 | 84-88807A44 | CABLE ASSEMBLY (10 IN.) |
| 10 | 84-850043A2 | HARNESS ASSEMBLY, Engine |
| 11 | 88-812619 | FUSE, Yellow - 20 Ampere |
| 12 | 84-850045A2 | HARNESS ASSEMBLY, Ignition |
| 13 | 84-88439A3 | CABLE ASSEMBLY, Positive - Battery |
| 14 | 85-830233 | BOOT, Insulator - Red |
| 15 | 827509A10 | CDM MODULE ASSEMBLY |
| 16 | 84-821945A61 | CABLE ASSEMBLY, Hi Tension |
| 17 | 85-63709A1 | BOOT/TERMINAL KIT |
| 18 | 33-938 | SPARK PLUG Comment: (NGK#BPZ8H-N-10) |
| 19 | 10-82129116 | SCREW, (M6 x 16) |
| 20 | 89-817109A2 | SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 21 | 23-8M0214955 | BUSHING |
| 22 | 25-822179 | GROMMET |
| 23 | 10-32,11-45076 | NUT, Brass |
| 24 | 13-8M0204647 | LOCKWASHER, (.312) |
| 25 | 11-8M0204668 | NUT, (.312-18) |
| 26 | 10-82129125 | SCREW, (M6 x 25 MM) |
| 27 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 28 | 8M0084173 | REGULATOR, Voltage |
| 29 | 10-82129135 | SCREW, (M6 x 35) |
| 30 | 54-54457 | J CLIP |
| 31 | 84-88439A4 | CABLE ASSEMBLY, Battery - Negative |
| 32 | 54-834813 | CLAMP |
| 33 | 56762 | TIE STRAP, (4.00 Inches) |
| 34 | 12-36001 | WASHER |
| 35 | 84-88807A16 | CABLE ASSEMBLY, (4.00 Inches) Black |
| 36 | 13541 | PLUG, Male |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 42954A5 | PLATE ASSEMBLY, Exhaust |
| 2 | 17-23784 | PIN, Dowel |
| 3 | 10-40011158 | SCREW, (M8 x 70) Stainless Steel |
| 4 | 881900T03 | MOUNT |
| 5 | 10-4010750 | SCREW, (M8 x 50) |
| 6 | 10-898487 | BOLT, (M12 x 175) |
| 7 | 12-32834 | WASHER, Neoprene |
| 8 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 9 | 11-896963 | NUT, (M12) |
| 10 | 27-430086 | GASKET |
| 11 | 87917216T | TUBE, Exhaust |
| 12 | 10-40011151 | SCREW, (M8 x 35) Stainless Steel |
| 13 | 8M0039075 | SEAL |
| 14 | 25-89417004 | GROMMET |
| 15 | 32-8M0042792 | TUBE, Water - X Long (18.21 Inches) Comment: (X-Long) |
| 16 | 824661 | CLAMP |
| 17 | 814080001 | SEAL, Upper |
| 18 | 10-4010750 | SCREW, (M8 x 50) |
| 19 | 42953A5 | BRACKET ASSEMBLY, Lower |
| 20 | 43405 | SEAL |
| 21 | 25-19565002 | GROMMET |
| 22 | 10-81742750 | SCREW, (M8 x 50) |
| 23 | 23-48237 | BUSHING |
| 24 | 79932A20 | SHIFT SHAFT ASSEMBLY |
| 25 | 42912A3 | SHIFT LINK |
| 26 | 23-48475 | BUSHING |
| 27 | 11-401386 | NUT, (M6) Stainless Steel |
| 28 | 23-11289 | SPACER Comment: (X-Long) |
| 29 | 43585 | COUPLING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 881912T01 | PLATE, Exhaust |
| 2 | 17-23784 | PIN, Dowel |
| 3 | 881973 | RETAINER |
| 4 | 881915002 | MOUNT |
| 5 | 10-881975 | SCREW, (M8 x 35 MM) |
| 6 | 10-898487 | BOLT, (M12 x 175) |
| 7 | 11-896963 | NUT, (M12) |
| 8 | 23-11289 | SPACER Comment: (X-Long) |
| 9 | 43585 | COUPLING |
| 10 | 27-430086 | GASKET |
| 11 | 42966T07 | TUBE, Exhaust |
| 12 | 10-40011151 | SCREW, (M8 x 35) Stainless Steel |
| 13 | 8M0039075 | SEAL |
| 14 | 25-89417004 | GROMMET |
| 15 | 32-8M0042792 | TUBE, Water - X Long (18.21 Inches) Comment: (18 1/4in) (X-Long) |
| 16 | 824661 | CLAMP |
| 17 | 814080001 | SEAL Comment: (Upper) |
| 18 | 10-889833045 | SCREW, (M8 x 45) |
| 19 | 881918T03 | CLAMP, Bracket, Upper Mount |
| 20 | 25-19565002 | GROMMET |
| 21 | 23-48237 | BUSHING |
| 22 | 79932A20 | SHIFT SHAFT ASSEMBLY |
| 23 | 42912A3 | SHIFT LINK |
| 24 | 23-48475 | BUSHING |
| 25 | 12-69056 | WASHER, (.255 x .620 x .030) Stainless Steel |
| 26 | 11-401386 | NUT, (M6) Stainless Steel |
| 27 | 10-40011151 | SCREW, (M8 x 35) Stainless Steel |
| 28 | 10-40011158 | SCREW, (M8 x 70) Stainless Steel |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, Yellow |
| 2 | 812777T1 | COVER ASSEMBLY |
| 3 | 11-42979 | NUT, (M16) |
| 4 | 12-33001 | WASHER, (.641 x 1.250 x .190) |
| 5 | 261-878227T2 | FLYWHEEL ASSEMBLY |
| 6 | 398-832075A21 | IGNITION STATOR KIT |
| 7 | 10-4013930 | SCREW, (M5 x 30) |
| 8 | 854513T | TRIGGER ASSEMBLY |
| 9 | 50-893892T | STARTER MOTOR ASSEMBLY |
| 10 | 23-8M0034918 | COLLAR |
| 11 | 8M0043376 | STOP, Rubber |
| 12 | 84-93388A1 | CABLE ASSEMBLY, (6.00 Inches) Black |
| 13 | 10-69035 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel |
| 14 | 84-93388A8 | CABLE ASSEMBLY, (12.5 Inchs) Black |
| 15 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 16 | 11-64015 | NUT, (.250-20) |
| 17 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 18 | 93254 | SWIVEL BASE |
| 19 | 93421 | SWIVEL BALL |
| 20 | NSS | NOT SOLD SEPARATE, Decal-Warning- High Voltage |
| 21 | 37-881865 | DECAL, Caution-Start in Gear (Start In Gear) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 17791T97 | POWERHEAD ASSEMBLY |
| 1 | 14360A78 | PUMP ASSEMBLY, Fuel |
| 2 | 21-857005A1 | DIAPHRAGM KIT |
| 3 | NSS | NOT SOLD SEPARATE, Gasket-Boost |
| 4 | NSS | NOT SOLD SEPARATE, Diaphragm |
| 5 | NSS | NOT SOLD SEPARATE, Gasket-Pulse |
| 6 | NSS | NOT SOLD SEPARATE, Spring |
| 7 | NSS | NOT SOLD SEPARATE, Cap |
| 8 | NSS | NOT SOLD SEPARATE, Check Valve |
| 9 | NSS | NOT SOLD SEPARATE, Retainer |
| 10 | NSS | NOT SOLD SEPARATE, Spring |
| 11 | NSS | NOT SOLD SEPARATE, Cap |
| 12 | 27-8M0204705 | GASKET |
| 13 | 144303 | BASE |
| 14 | 987752 | PLATE |
| 15 | 22-996642 | FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 16 | 10-82104540 | SCREW, (M5 x 40) |
| 17 | 10-82130050 | SCREW, (M6 x 50) |
| 18 | NSS | NOT SOLD SEPARATE, Decal |
| 19 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) Comment: (Cut to 4 Inches) |
| 20 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) Comment: (Cut to 8.5 Inches) |
| 21 | 32-8M0108349 | TUBING, (.312) (70.00 Inches Bulk) Comment: (Cut to 2 Inches) |
| 22 | 22-996642 | FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 23 | 8M0214940 | TIE STRAP, (5.50 Inches) |
| 24 | 35-816296Q2 | FILTER, Fuel |
| 25 | 32-822554 | MOLDED HOSE |
| 26 | 22-8189941 | CHECK VALVE |
| 27 | 54-188871 | CLAMP |
| 28 | 22-822771 | CONNECTOR |
| 29 | 22-822769 | CONNECTOR Comment: SN# USA-0G960500/BEL-0P059000 THRU USA-0T979999/BEL-0P325499 |
| 30 | 32-85682257 | TUBING, (26.00 Inches Bulk) Comment: (Cut to 4 Inch Length) SN# USA-0G960500/BEL-0P059000 THRU USA-0T979999/BEL-0P325499 |
| 31 | 25-145093 | GROMMET Comment: SN# USA-0G960500/BEL-0P059000 THRU USA-0T979999/BEL-0P325499 |
| 32 | NSS | NOT SOLD SEPARATE, Plug Comment: SN# USA-0G960500/BEL-0P059000 THRU USA-0T979999/BEL-0P325499 |
| 33 | 22-816856Q3 | CONNECTOR ASSEMBLY, Fuel Comment: SN# USA-0G960499/BEL-0P059777 & Below |
| 34 | 25-16524 | O-RING, Fuel Connector Comment: SN# USA-0G960499/BEL-0P059777 & Below |
| 35 | 25-145091 | GROMMET Comment: SN# USA-0G960499/BEL-0P059777 & Below |
| 36 | 10-4010635 | SCREW, (M6 x 35) Stainless Steel Comment: SN# USA-0G960499/BEL-0P059777 & Below |
| 37 | 32-1430165 | TUBING, (38.00 Inches Bulk) Comment: (Cut to 15 Inch Length) |
| 38 | 32-1430165 | TUBING, (38.00 Inches Bulk) Comment: (Cut to 13 Inch Length) |
| 39 | 32-1430165 | TUBING, (38.00 Inches Bulk) Comment: (Cut to 1.25 Inch Length) |
| 40 | 19-17608 | FLOW RESTRICTOR |
| 41 | 22-830570 | FITTING, Tee |
| 42 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 4.50 Inch Length) |
| 43 | 32-892024122 | TUBING, (20.00 Feet Bulk) Comment: (Cut to 2.50 Inch Length) |
| 44 | 35-8M0207786 | FILTER |
| 45 | 14687A4 | PUMP ASSEMBLY, Accelerator (REPAIR KIT 1395-811287) |
| 46 | 10-4009416 | SCREW, (M6 x 16) |
| 47 | 12-69056 | WASHER, (.255 x .620 x .030) Stainless Steel |
| 48 | 89-819503A1 | SOLENOID ASSEMBLY, Enrichner Valve |
| 49 | 32-9912688 | TUBING, (36.00 Inches Bulk) Comment: (Cut to 11.50 Inch Length) |
| 50 | 32-9912688 | TUBING, (36.00 Inches Bulk) Comment: (Cut to 5.25 Inch Length) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 0 | 25-858225 | O-RING (2.112 I.D.) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 47-8M0100526 | REPAIR KIT, Water Pump Impeller |
| 1 | 1667-9011G59 | GEAR HOUSING ASSEMBLY, Basic |
| 2 | 17-8M0084244 | PIN, Dowel - With Hole (.375 x .625) (FRONT) |
| 3 | 43046 | TUBE, Oiler |
| 4 | 22-8M0058389 | FITTING KIT, Magnetic, Plug Fill/Drain Comment: (MAGNETIC) |
| 5 | 12-191833 | WASHER |
| 6 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) (REAR) |
| 7 | 31640T07 | TRIM TAB |
| 8 | 10-825427 | SCREW, (.437-14 x 1.250) Stainless Steel |
| 9 | 12-451761 | WASHER, (.453 x .812 x .105) Black Oxide |
| 10 | 43040T1 | CARRIER ASSEMBLY |
| 11 | NSS | NOT SOLD SEPARATE, Needle Bearing |
| 12 | 97-826134Q | ANODE |
| 13 | 11-401386 | NUT, (M6) Stainless Steel |
| 14 | 10-4000333 | SCREW, (M6 x 40) |
| 15 | NSS | NOT SOLD SEPARATE, Pinion Gear (12 Teeth) Comment: (High Altitude)(2.33:1)(Part of 43-882813A3) |
| 16 | 11-35921 | NUT, (.625-18) |
| 17 | 850307 | CAM, Shift Control |
| 18 | 31-883047A1 | BEARING ASSEMBLY, Tapered Roller |
| 19 | 15-44492A1 | SHIM SET |
| 20 | 45-43032A4 | DRIVESHAFT ASSEMBLY Comment: (X-LONG-37 Inch) |
| 21 | 42461A1 | SLEEVE/RING KIT |
| 22 | NSS | NOT SOLD SEPARATE, Seal Ring |
| 23 | 43055A4 | COVER ASSEMBLY, Water Pump |
| 24 | 27-430331 | GASKET |
| 25 | 27-8M0214931 | GASKET |
| 26 | 26-43036 | SEAL, Oil (LOWER) |
| 27 | 26-43035 | SEAL, Oil (UPPER) |
| 28 | 27-8172771 | GASKET |
| 29 | 817275A2 | HOUSING KIT, Upper Water Pump |
| 30 | 8M0204709 | FACEPLATE |
| 31 | 10-82684430 | SCREW, (M6 x 30) |
| 32 | 430232 | SEAL |
| 33 | 28-8M0204723 | KEY |
| 34 | 47-43026T2 | IMPELLER |
| 35 | 10-82684425 | SCREW, (M6 x 25) |
| 36 | 853908A1 | SHIFT SHAFT ASSEMBLY Comment: (X-LONG-17 Inch) |
| 37 | 53-29641 | E RING |
| 38 | 23-43052A4 | BUSHING ASSEMBLY |
| 39 | 25-8M0204681 | O-RING, (1.424 x .103) |
| 40 | 26-8M0204708 | SEAL, Oil |
| 41 | 10-82684425 | SCREW, (M6 x 25) |
| 42 | 26-861415 | FACE SEAL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 47-8M0100526 | REPAIR KIT, Water Pump Impeller |
| 1 | 1667-9011G59 | GEAR HOUSING ASSEMBLY, Basic |
| 2 | 17-8M0084244 | PIN, Dowel - With Hole (.375 x .625) (Front) |
| 3 | 43046 | TUBE, Oiler |
| 4 | 22-8M0058389 | FITTING KIT, Magnetic, Plug Fill/Drain Comment: (MAGNETIC) |
| 5 | 12-191833 | WASHER |
| 6 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) (Rear) |
| 7 | 31640T07 | TRIM TAB |
| 8 | 10-825427 | SCREW, (.437-14 x 1.250) Stainless Steel |
| 9 | 12-451761 | WASHER, (.453 x .812 x .105) Black Oxide |
| 10 | 43040T1 | CARRIER ASSEMBLY |
| 11 | NSS | NOT SOLD SEPARATE |
| 12 | 97-826134Q | ANODE |
| 13 | 11-401386 | NUT, (M6) Stainless Steel |
| 14 | 10-4000333 | SCREW, (M6 x 40) |
| 15 | 43-44484T | GEAR, Pinion (13 Teeth) (Also part of 43-850033A2)(13 Teeth) Comment: (High Altitude) |
| 16 | 11-35921 | NUT, (.625-18) |
| 17 | 850307 | CAM, Shift Control |
| 18 | 31-883047A1 | BEARING ASSEMBLY, Tapered Roller Comment: (Use W/Pinion stamped 43-881259) |
| 19 | 15-44492A1 | SHIM SET |
| 20 | 45-43032A4 | DRIVESHAFT ASSEMBLY Comment: (X-Long-37 Inch) |
| 21 | 42461A1 | SLEEVE/RING KIT |
| 22 | NSS | NOT SOLD SEPARATE |
| 23 | 43055A4 | COVER ASSEMBLY, Water Pump |
| 24 | 27-430331 | GASKET |
| 25 | 27-8M0214931 | GASKET |
| 26 | 26-43036 | SEAL, Oil, Lower |
| 27 | 26-43035 | SEAL, Oil, Upper |
| 28 | 27-8172771 | GASKET |
| 29 | 817275A2 | HOUSING KIT, Upper Water Pump |
| 30 | 8M0204709 | FACEPLATE |
| 31 | 10-82684430 | SCREW, (M6 x 30) |
| 32 | 430232 | SEAL |
| 33 | 28-8M0204723 | KEY |
| 34 | 47-43026T2 | IMPELLER |
| 35 | 10-82684425 | SCREW, (M6 x 25) |
| 36 | 853908A1 | SHIFT SHAFT ASSEMBLY Comment: (X-Long-17 Inch) |
| 37 | 53-29641 | E RING |
| 38 | 23-43052A4 | BUSHING ASSEMBLY |
| 39 | 25-8M0204681 | O-RING, (1.424 x .103) |
| 40 | 26-8M0204708 | SEAL, Oil |
| 41 | 10-82684425 | SCREW, (M6 x 25) |
| 42 | 26-861415 | FACE SEAL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 1667-9011G59 | GEAR HOUSING ASSEMBLY, Basic Comment: (Basic) |
| 2 | 31-30894A1 | BEARING SET, Cup And Cone |
| 3 | NSS | NOT SOLD SEPARATE, Cup |
| 4 | 43-882813A3 | GEAR KIT, Forward And Pinion 28 Teeth Comment: (High Altitude- 2.33:1 Ratio) |
| 5 | 31-30895T | BEARING, Needle |
| 6 | 53-856823 | RING, Retaining |
| 7 | 850315A1 | FOLLOWER KIT, Cam |
| 8 | 30-44530 | BALL |
| 9 | NSS | NOT SOLD SEPARATE, Slide |
| 10 | 24-850327 | SPRING |
| 11 | 17-8M0100263 | PIN, Cross |
| 12 | 24-30893 | SPRING |
| 13 | 52-850048T | CLUTCH |
| 14 | 44-8M0140445 | PROPELLER SHAFT |
| 15 | 43-882814T | GEAR, Reverse - 28 Teeth Comment: (High Altitude- 2.33:1 Ratio) |
| 16 | 8M0168901 | CARRIER ASSEMBLY, Bearing |
| 17 | 25-8M0214974 | O-RING, (3.609 x .139) |
| 18 | 31-30956T | BEARING, Needle |
| 19 | 26-8M0205728 | SEAL, Oil, Inner |
| 20 | 26-8M0205729 | SEAL, Oil, Outer |
| 21 | 31-12578T | BEARING, Roller |
| 22 | 12-12577 | THRUST WASHER |
| 23 | 31-12576 | BEARING, Thrust |
| 24 | 16-8M0034456 | STUD, (M8 x 48) |
| 25 | 12-855941 | WASHER, (.323 x .590 x .112) Stainless Steel |
| 26 | 11-401378 | NUT, (M8) |
| 27 | 15-44491A1 | SHIM SET |
| 28 | 8227731 | INSERT, Threaded |
| 29 | NSS | NOT SOLD SEPARATE, Decal-G/H Pinion Indent |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 1667-9011G59 | GEAR HOUSING ASSEMBLY, Basic Comment: (BASIC) |
| 2 | 31-30894A1 | BEARING SET, Cup And Cone |
| 3 | NSS | NOT SOLD SEPARATE, Cup |
| 4 | 43-859472A3 | GEAR ASSEMBLY, Forward - 30 Teeth Comment: (HIGH ALTITUDE- 2.31:1 RATIO) |
| 5 | 31-30895T | BEARING, Needle |
| 6 | 53-856823 | RING, Retaining |
| 7 | 850315A1 | FOLLOWER KIT, Cam |
| 8 | 30-44530 | BALL |
| 9 | NSS | NOT SOLD SEPARATE, Slide |
| 10 | 24-850327 | SPRING |
| 11 | 17-8M0100263 | PIN, Cross |
| 12 | 24-30893 | SPRING |
| 13 | 52-850048T | CLUTCH |
| 14 | 44-8M0140445 | PROPELLER SHAFT |
| 15 | 43-850034T | GEAR, Reverse (30 Teeth) Comment: (HIGH ALTITUDE- 2.31:1 RATIO) |
| 16 | 8M0168901 | CARRIER ASSEMBLY, Bearing |
| 17 | 25-8M0214974 | O-RING, (3.609 x .139) |
| 18 | 31-30956T | BEARING, Needle |
| 19 | 26-8M0205728 | SEAL, Oil (INNER) |
| 20 | 26-8M0205729 | SEAL, Oil (OUTER) |
| 21 | 31-12578T | BEARING, Roller |
| 22 | 12-12577 | THRUST WASHER |
| 23 | 31-12576 | BEARING, Thrust |
| 24 | 16-8M0034456 | STUD, (M8 x 48) |
| 25 | 12-855941 | WASHER, (.323 x .590 x .112) Stainless Steel |
| 26 | 11-401378 | NUT, (M8) |
| 27 | 15-44491A1 | SHIM SET |
| 28 | 8227731 | INSERT, Threaded |
| 29 | NSS | NOT SOLD SEPARATE, Decal-G/H Pinion Indent |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 17791T97 | POWERHEAD ASSEMBLY |
| 1 | 44325A1 | COVER/PLATE KIT, Exhaust |
| 2 | NSS | NOT SOLD SEPARATE, Exhaust Plate |
| 3 | 27-812775007 | GASKET, Baffle Plate to Cylinder Block |
| 4 | 27-812775006 | GASKET, Exhaust Baffle to Exhaust Cover |
| 5 | 10-82127335 | SCREW, (M8 x 35 MM) |
| 6 | 22-996642 | FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 7 | 42881A1 | SHIFT RAIL ASSEMBLY |
| 8 | 14-42981 | TAB WASHER |
| 9 | 10-40001134 | SCREW, (M8 x 25) |
| 10 | 988851 | SLIDE |
| 11 | 11-401386 | NUT, (M6) Stainless Steel |
| 12 | 12-35459 | WASHER |
| 13 | 11-401386 | NUT, (M6) Stainless Steel |
| 14 | 27-430075 | GASKET |
| 15 | 1169-858552T2 | CAP ASSEMBLY, Lower End Comment: SN# 0T758475 THRU 0T979999 |
| 16 | 21-426585 | CHECK VALVE |
| 17 | 26-419533 | SEAL, Oil Comment: SN# 0T758475 THRU 0T979999 |
| 18 | 25-89224 | O-RING |
| 19 | 10-4010825 | SCREW, (M10 x 25) Hex Flange - Stainless Steel |
| 20 | 22-13033 | TEE FITTING |
| 21 | 32-1430165 | TUBING, (38.00 Inches Bulk) Comment: (Cut to 5.50 Inch Length) |
| 22 | 22-130351 | FITTING (STRAIGHT) |
| 23 | 13545A1 | MANIFOLD ASSEMBLY, Induction |
| 24 | 827514 | BRACKET |
| 25 | 10-82127335 | SCREW, (M8 x 35 MM) |
| 26 | 10-81742740 | SCREW, (M8 x 40) |
| 27 | 16-8161949 | STUD, (M6 x 44) |
| 28 | 12-8M0204663 | WASHER, (.187 x .500 x .062) Neoprene |
| 29 | 11-816872 | WING NUT |
| 30 | 10-40001167 | SCREW, (M8 x 110) (#4 CYLINDER) |
| 31 | 16-824470 | STUD, (M8 x 1.25) (#1, 2, 3 CYLINDER) |
| 32 | 27-134612 | GASKET |
| 33 | 13460 | COVER |
| 34 | 10-81742755 | SCREW, (M8 x 55) |
| 35 | 8M0219198 | REED BLOCK ASSEMBLY |
| 36 | NSS | NOT SOLD SEPARATE, Dowel Pin |
| 37 | 27-139376 | GASKET |
| 38 | 34-43018A1 | REED SET |
| 39 | 14-429821 | TAB WASHER |
| 40 | 42924 | RETAINER |
| 41 | 10-88421471 | SCREW, (M6 x 16) |
| 42 | 37-804667A04 | DECAL, EPA Label Information Comment: (2004) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 856143A1 | JET PUMP ASSEMBLY |
| 1 | 855767T90 | HOUSING, Pump |
| 2 | 878377 | SHIFT LINKAGE KIT |
| 3 | 878382 | CAM |
| 4 | 878380 | GATE, Reverse - With Bumper |
| 5 | 32-827490 | HOSE, Lube |
| 6 | 10-848497 | SCREW, (.312-18 x 1.00) |
| 7 | 16-855840 | STUD, (.312-18 x 1.81) |
| 8 | 11-82670910 | NUT, (.312-18) Stainless Steel |
| 9 | 85576890 | HOUSING, Intake |
| 10 | 855771 | LINER |
| 11 | 45-85576990 | DRIVESHAFT |
| 12 | 12-8796522 | THRUST WASHER |
| 13 | 30-8796531 | BEARING, Ball |
| 14 | 23-8271891 | SLEEVE |
| 15 | 11-8271901 | NUT |
| 16 | 808747 | ADAPTOR, Pump |
| 17 | 47-855708115 | IMPELLER |
| 18 | 12-36001 | WASHER |
| 19 | 28-801405875 | KEY |
| 20 | 15-801404875 | SHIM, Impeller |
| 21 | 14-801403875 | TAB WASHER |
| 22 | 17-801407 | PIN, Dowel |
| 23 | 10-19923062 | SCREW, (.250-20 x .625) |
| 24 | 10-60411 | SCREW, (.312-18 x 1.250) |
| 25 | 801410 | BRACKET, Cable Support |
| 26 | 11-82670910 | NUT, (.312-18) Stainless Steel |
| 27 | 10-4010860 | SCREW, (M10 x 60) Hex Flange - Stainless Steel |
| 28 | 10-4010890 | SCREW, (M10 x 90) Hex Flange - Stainless Steel |
| 29 | 10-4010870 | SCREW, (M10 x 70) Hex Flange - Stainless Steel |
| 30 | 10-843575 | SCREW, (.375-16 x 4.00) Stainless Steel |
| 31 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 817275A2 | HOUSING KIT, Upper Water Pump |
| 2 | 27-8172771 | GASKET |
| 3 | 8M0204709 | FACEPLATE |
| 4 | 10-82684430 | SCREW, (M6 x 30) |
| 5 | 430232 | SEAL |
| 6 | 28-8M0204723 | KEY |
| 7 | 47-43026T2 | IMPELLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 0 | 8949112 | KEY, Ignition (2F) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-13461A99 | GASKET SET |
| 1 | 1278-8M0219217 | TANK ASSEMBLY, Oil |
| 2 | 828475A1 | CAP |
| 3 | 25-26318T | O-RING |
| 4 | 828793 | DIPSTICK |
| 5 | 11-65110 | NUT |
| 6 | 19299A1 | VENT ASSEMBLY |
| 7 | 21-64871 | VALVE |
| 8 | 8287201 | BRACKET |
| 9 | 99160001 | BOOT |
| 10 | 10-4010620 | SCREW, (M6 x 20) Stainless Steel |
| 11 | 25-825380001 | GROMMET |
| 12 | 23-828350 | BUSHING |
| 13 | 12-817274 | WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 14 | 10-81893435 | SCREW, (M8 x 35) |
| 15 | 87-12886A6 | SWITCH ASSEMBLY |
| 16 | 10-58376 | SCREW, (.164-18 x .375) |
| 17 | 12-72761 | WASHER, (.203 x .562 x .060) Stainless Steel |
| 18 | 43-430204 | GEAR, Driven |
| 19 | 25-8M0204667 | O-RING |
| 20 | 17335A3 | ADAPTOR ASSEMBLY |
| 21 | 23-17597 | BUSHING |
| 22 | 23-17596 | BUSHING |
| 23 | 44345T3 | PUMP, Oil |
| 24 | 10-82104540 | SCREW, (M5 x 40) |
| 25 | 32-82381335 | TUBING, (15.00 Inches Bulk) Comment: (Cut to 6.00 Inch Length) |
| 26 | 32-82381455 | TUBING, (25.00 Inches Bulk) Comment: (Cut to 11.00 Inch Length) |
| 27 | 54-816311T | TIE STRAP, (8.00 Inches) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 25-893914A02 | O-RING KIT (Complete Trim) |
| 1 | 8M0171821 | SHOCK ROD KIT |
| 2 | 25-8M0171819 | O-RING KIT, Rebuild |
| 3 | 8M0171822 | PISTON ASSEMBLY, Memory |
| 4 | 893916A01 | CYLINDER ASSEMBLY |
| 5 | 893905A02 | VALVE KIT, Trim Limit |
| 6 | 893906A02 | PUMP ASSEMBLY |
| 7 | 893907A02 | MOTOR KIT |
| 8 | 22-8134351 | PLUG |
| 9 | 893929A01 | MANUAL RELEASE ASSEMBLY |
| 10 | 893909A02 | MANIFOLD KIT |
| 11 | 10-809876A1 | SCREW KIT (MOTOR) |
| 12 | 88238A18 | CABLE ASSEMBLY |
| 13 | 809877A1 | DRIVESHAFT/SEAL KIT |
| 14 | 35-893912A02 | FILTER KIT |
| 15 | 893913A02 | POPPET KIT |
| 16 | 17-821539 | PIN, Trilobe |
| 17 | 17-818898 | PIN, Anchor |
| 18 | 99625002 | SHAFT |
| 19 | 8M0207773 | RELAY ASSEMBLY |
| 20 | 23-8M0214955 | BUSHING |
| 21 | 25-818967 | GROMMET |
| 22 | 828102 | BRACKET |
| 23 | NSS | NOT SOLD SEPARATE, Decal-Trim Relay |
| 24 | 84-8M0092077 | HARNESS ASSEMBLY, Trim |
| 25 | 10-82129125 | SCREW, (M6 x 25 MM) |
| 26 | 54-22740 | CLIP |
| 27 | 10-878609 | SCREW, (#10-16 x .600) |
| 28 | 8M0084613 | C WASHER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 0 | 37-804667A04 | DECAL, EPA Label Information Comment: (2004) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 50-893892T | STARTER MOTOR ASSEMBLY |
| 1 | 15383 | DRIVE KIT |
| 2 | 13310T1 | PINION ASSEMBLY |
| 3 | 75660 | PLATE |
| 4 | 15384 | THRU BOLT |
| 5 | 15385 | ARMATURE |
| 6 | 898265016 | BRUSH/SPRING KIT |
| 7 | 15386001 | END CAP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 12022A41 | TILLER HANDLE KIT |
| NS | 22-8M0169589 | FITTING, Grease |
| 1 | 12020A3 | HANDLE ASSEMBLY, Steering Arm |
| 2 | 23-42992T02 | BUSHING |
| 3 | 48414 | HOUSING |
| 4 | 48519 | PLATE |
| 5 | 27-48518 | GASKET |
| 6 | 10-878609 | SCREW, (#10-16 x .600) |
| 7 | 10-878608 | SCREW, (#10-16 x .500) |
| 8 | 54-889729 | CLAMP |
| 9 | 10-40007112 | SCREW, (M5 x 40) |
| 10 | 10-32,11-816874 | WING NUT, |
| 11 | 87-823609A15 | SWITCH KIT, Stop - Throttle Handle |
| 12 | 87-8M0104612 | SWITCH ASSEMBLY, Stop |
| 13 | NSS | NOT SOLD SEPARATE, Insulator |
| 14 | 12018A4 | TUBE ASSEMBLY, Throttle |
| 15 | NSS | NOT SOLD SEPARATE, Drive Wheel |
| 16 | NSS | NOT SOLD SEPARATE, Roll Pin |
| 17 | 10-62568 | SCREW, (#10-16 x .375) |
| 18 | 8M0221732 | GRIP |
| 19 | 54-648551 | CLAMP |
| 20 | 11-40140 | NUT, (M10) |
| 21 | 8885242 | CONDUIT |
| 22 | 895663 | GUIDE TUBE |
| 23 | 89578 | BARREL |
| 24 | 10-32,10-824081 | SET SCREW, |
| 25 | 120191 | CABLE ASSEMBLY |
| 26 | 434332 | GUIDE |
| 27 | 20007 | ANCHOR |
| 28 | 8-32,10-8M0204644 | SET SCREW, |
| 29 | 10-823567105 | SCREW, (M10 x 105) Hex Flange - Stainless Steel |
| 30 | 48416 | CAP |
| 31 | 12-4002319 | WASHER |
| 32 | 12-12024 | WASHER, (.402 x .787 x .039 Bellevi) |
| 33 | 23-146011 | SPACER |
| 34 | 12-8M0214963 | WASHER, (.406 x .750 x .105) Stainless Steel Comment: (Use Where Applicable) |
| 35 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 36 | NSS | NOT SOLD SEPARATE, Decal-Throttle |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 12022A41 | TILLER HANDLE KIT |
| 1 | 12022A22 | BRACKET ASSEMBLY |
| 2 | 10-849838 | SCREW, (.375-24 x 1.250) |
| 3 | 11-8M0204726 | NUT, (.375-24) Stainless Steel |
| 4 | 16-8M0034421 | STUD, (.3125 x 2.50) |
| 5 | 822263 | SPACER |
| 6 | 12-8M0204690 | WASHER, (.344 x .688 x .065) Stainless Steel |
| 7 | 11-82670911 | NUT, (.312-24) Stainless Steel |
| 8 | 121051 | GROMMET |
| 9 | 84-12649A5 | HARNESS ASSEMBLY |
| 10 | 87-88107A5 | SWITCH KIT, Key Comment: (See Key Chart for Keys) |
| 11 | 11-879755 | NUT, Special - Chrome Brass |
| 12 | 12015A1 | COVER |
| 13 | 10-878608 | SCREW, (#10-16 x .500) |
| 14 | 87-11083A4 | SWITCH ASSEMBLY, Stop |
| 15 | 15920Q54 | LANYARD ASSEMBLY |
| 16 | 8M0032846 | RETAINER, Brass |
| 17 | 10-4000358 | SCREW, (M8 x 50) |
| 18 | 14-42981 | TAB WASHER |
| 19 | 23-889732 | BUSHING |
| 20 | 12021A1 | LEVER ASSEMBLY, Shift |
| 21 | 12-815351 | WASHER |
| 22 | NSS | NOT SOLD SEPARATE, Decal-Shift |
| 23 | 16-8M0034452 | STUD, (.375-24 x 1.125) |
| 24 | 98530 | KNOB |
| 25 | 495636 | SHIFT ROD |
| 26 | 48419T | ROD END |
| 27 | 23-26856 | BUSHING |
| 28 | 12-35950 | WASHER, (.273 x .437 x .031) Stainless Steel |
| 29 | 18-25191 | COTTER PIN |
| 30 | 12016A2 | DETENT/SPRING KIT |
| 31 | NSS | NOT SOLD SEPARATE, Spring |
| 32 | 87-14645A4 | TRIM SWITCH Comment: (Power Trim) |
| 33 | 49440 | NUT, (.468-32) Comment: (Power Trim) |
| 34 | NSS | NOT SOLD SEPARATE, Decal-Trim Comment: (Component of 14645A4 Trim Switch) |
| 35 | 816051A2 | HORN ASSEMBLY |
| 36 | 84-11149A3 | CABLE ASSEMBLY |
| 37 | 84-86324A2 | CABLE ASSEMBLY |
| 38 | 824930T3 | BRACKET Comment: (X-Long) |
| 39 | 87-8M0052927 | SWITCH Comment: (X-Long) |
| 40 | 10-88075020 | SCREW, (M3.5 x 20) Stainless Steel Comment: (X-Long) |
| 41 | 824923 | PLATE Comment: (X-Long) |
| 42 | 84-824934A3 | HARNESS ASSEMBLY Comment: (X-Long) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1400-8M0220957 | SWIVEL BRACKET |
| 2 | 26-87735 | SEAL, Oil, Lower |
| 3 | 23-818764 | BUSHING |
| 4 | 25-8M0214926 | O-RING |
| 5 | 23-816039 | SPACER |
| 6 | 22-8M0169589 | FITTING, Grease |
| 7 | 23-821207 | BUSHING |
| 8 | 10-64014 | SCREW, (.250-28 x .500) |
| 9 | 99661A35 | SWIVEL PIN ASSEMBLY |
| 10 | 92876A12 | LINK ROD ASSEMBLY |
| 11 | 10-849838 | SCREW, (.375-24 x 1.250) |
| 12 | 11-8M0204726 | NUT, (.375-24) Stainless Steel |
| 13 | 12-37828 | WASHER, (.390 x .625 x .062) Stainless Steel |
| 14 | 8M0000519 | BUMPER Comment: SN# USA-0T801000/ BEL-0P268000 & Up |
| 15 | 42961A06 | YOKE ASSEMBLY, Bottom |
| 16 | 53-67684 | RING, Retaining |
| 17 | 12-816432 | THRUST WASHER |
| 18 | NSS | NOT SOLD SEPARATE, Decal-Serial Overlaminate |
| 19 | NSS | NOT SOLD SEPARATE, Decal-Serialization |
| 20 | 88882 | BUMPER, Top Yoke Comment: (X-Long) |
| 21 | 11288001 | BUMPER, Bottom Yoke Comment: (X-Long |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 884309T | LEVER, Throttle |
| 2 | 10-827009 | SCREW, (M5 x 40) |
| 3 | 826264 | CAP |
| 4 | 24-826382 | SPRING |
| 5 | 48039 | CAP |
| 6 | 884307T | LEVER, Spark Advance |
| 7 | 10-814776 | SCREW, Adjusting (M6 x 55) |
| 8 | 11-400212 | NUT, (M6) Stainless Steel |
| 9 | 42942 | CAP |
| 10 | 10-4007180 | SCREW, (M10 x 45) |
| 11 | 23-55171 | BUSHING |
| 12 | 24-73375 | SPRING |
| 13 | 23-812930A1 | BUSHING |
| 14 | NSS | NOT SOLD SEPARATE, Insert |
| 15 | 12-42980 | WASHER |
| 16 | 42927 | INSERT |
| 17 | 12-35459 | WASHER |
| 18 | 11-401386 | NUT, (M6) Stainless Steel |
| 19 | 878170 | ROD, Spark Advance |
| 20 | 93421 | SWIVEL BALL |
| 21 | 93254 | SWIVEL BASE |
| 22 | 23-8M0215006 | BUSHING |
| 23 | 11-401386 | NUT, (M6) Stainless Steel |
| 24 | 12-69056 | WASHER, (.255 x .620 x .030) Stainless Steel |
| 25 | 878173 | LINK |
| 26 | 23-8M0215006 | BUSHING |
| 27 | 14518A2 | CAM ASSEMBLY, Throttle |
| 28 | 16-8161949 | STUD, (M6 x 44) |
| 29 | NSS | NOT SOLD SEPARATE, Decal-Idle (Arrow-Down) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 850000A3 | TILLER HANDLE ADAPTOR KIT |
| 1 | 832001A6 | CABLE ASSEMBLY, Shift |
| 2 | 11-401386 | NUT, (M6) Stainless Steel |
| 3 | 988851 | SLIDE |
| 4 | 828095 | BRACKET |
| 5 | 824930T3 | BRACKET |
| 6 | 54-8054441 | CLIP |
| 7 | 10-40011126 | SCREW, (M6 x 13) Stainless Steel |
| 8 | 828096 | BLOCK, Shift Cable-Retaining |
| 9 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 10 | 10-71958 | SCREW, (.250-28 x 1.75) |
| 11 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 12 | 828094 | BLOCK, Shift Cable-Retaining |
| 13 | 10-72734 | SET SCREW, (#10-32 x .310) |
| 14 | 12-35459 | WASHER |
| 15 | 11-35888 | NUT, (.250-28) Stainless Steel |
| 16 | 87-8M0052927 | SWITCH |
| 17 | 10-88075020 | SCREW, (M3.5 x 20) Stainless Steel |
| 18 | 824923 | PLATE |
| 19 | 84-824934A1 | CABLE ASSEMBLY |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 0 | 91-14310T1 | WEAR SLEEVE INSTALLATION TOOL Comment: (Gear Housing) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 4026-828354A10 | TOP COWL ASSEMBLY, Silver Cowl And Black Cap |
| 2 | 828716A2 | CAP |
| 3 | 828352 | SEAL |
| 4 | 8283511 | SEAL |
| 5 | 821875F2 | CAP, Upper |
| 6 | 819813T1 | BRACKET, Cover Latch |
| 7 | 893763 | BRACKET ASSEMBLY, Latch Roller |
| 8 | 13-53166 | LOCKWASHER, (.312) |
| 9 | 10-90285 | SCREW, (.312-18 x .625) |
| 10 | F481434 | GUIDE, Cowl Latch Bracket |
| 11 | 11-91925 | PUSH NUT |
| 12 | 10-822512 | SCREW, (.250-20 x 1.00) |
| 13 | 19-823865 | CAP PLUG |
| 14 | 10-82130016 | SCREW, (M6 x 16) |
| 15 | 823830 | SUPPORT |
| 16 | 10-8231871 | SCREW, (M4 x 14.5) |
| 17 | 8,13-26995 | LOCKWASHER, Stainless Steel |
| 18 | 8233941 | BRACKET |
| 19 | 11-8237515 | NUT, (M4) |
| 20 | 823583A02 | SOUND BLANKET KIT |
| 21 | NSS | NOT SOLD SEPARATE, Sound Blanket |
| 22 | 47341A11 | ROPE AND HANDLE KIT, Manual Starting |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3426-828334T02 | BRACKET, Transom Comment: (Starboard) |
| 2 | 3425-828333T07 | BRACKET ASSEMBLY, Transom Comment: (Port) |
| 3 | 22-8M0169588 | FITTING, Grease Comment: (Port) |
| 4 | 826125A1 | TILT TUBE Comment: (Stainless Steel) |
| 5 | 11-826135 | NUT, (1.00-14) Nylon Insert Comment: (Coastal/Saltwater) |
| 6 | 25-45711 | O-RING, (.612 x .103) |
| 7 | 13-88750 | WASHER |
| 8 | 11-826164 | NUT, (.875-14) Comment: (Coastal/Saltwater) |
| 9 | 10-8M0149747 | SCREW, (.500-20 x 4.500) |
| 10 | 12-8M0204665 | WASHER, (.530 x .870 x .105) Stainless Steel |
| 11 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 12 | 11-82671117 | NUT, (.500-20) |
| 13 | 24-830899 | SPRING, Tension |
| 14 | 8M0109798 | LEVER ASSEMBLY, Tilt Lock |
| 15 | 23-65830 | NYLINER |
| 16 | 24-830900 | SPRING, Compression |
| 17 | 99633 | KNOB |
| 18 | 17-99615 | PIN, Groove |
| 19 | 17-893709 | PIN |
| 20 | 8M0086406 | BRACKET, Anchor |
| 21 | 10-858771 | SCREW, (M10 x 30) |
| 22 | 12-4002319 | WASHER |
| 23 | 11-40114 | NUT, (M10 x 1.5) |
| 24 | 97-818298Q1 | ANODE KIT |
| 25 | 10-8M0204707 | SCREW, (M6 x 25) |
| 26 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3426-828334T02 | BRACKET, Transom Comment: (Starboard) |
| 2 | 3425-828333T07 | BRACKET ASSEMBLY, Transom Comment: (Port) |
| 3 | 22-8M0169588 | FITTING, Grease Comment: (Port) |
| 4 | 826125A1 | TILT TUBE Comment: (Saltwater) |
| 5 | 11-826135 | NUT, (1.00-14) Nylon Insert Comment: (Saltwater) |
| 6 | 25-45711 | O-RING, (.612 x .103) |
| 7 | 13-88750 | WASHER |
| 8 | 11-826164 | NUT, (.875-14) Comment: (Saltwater) |
| 9 | 10-8M0149747 | SCREW, (.500-20 x 4.500) |
| 10 | 12-8M0204665 | WASHER, (.530 x .870 x .105) Stainless Steel |
| 11 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 12 | 11-82671117 | NUT, (.500-20) |
| 13 | 24-830899 | SPRING, Tension |
| 14 | 8M0109798 | LEVER ASSEMBLY, Tilt Lock |
| 15 | 23-65830 | NYLINER |
| 16 | 24-830900 | SPRING, Compression |
| 17 | 99633 | KNOB |
| 18 | 17-99615 | PIN, Groove |
| 19 | 17-893709 | PIN |
| 20 | 8M0086406 | BRACKET, Anchor |
| 21 | 10-858771 | SCREW, (M10 x 30) |
| 22 | 12-4002319 | WASHER |
| 23 | 11-40114 | NUT, (M10 x 1.5) |
| 24 | 97-818298Q1 | ANODE |
| 25 | 10-8M0204707 | SCREW, (M6 x 25) |
| 26 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 27 | 54-22740 | CLIP |
| 28 | 8M0084613 | C WASHER |
| 29 | 10-878609 | SCREW, (#10-16 x .600) |
| 30 | 8M0171818 | PUMP ASSEMBLY, Power Trim Comment: (Break down found on Power Trim Components) |
| 31 | 99625002 | SHAFT Comment: (Upper) |
| 32 | 17-818898 | PIN, Anchor |
| 33 | 17-821539 | PIN, Trilobe |
Regular maintenance keeps your Mercury 115 (4 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!