🔎 Mercury 150 Pro XS (2.5L) Reference Library — Exploded parts diagrams (38 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 150 Pro XS (2.5L) is a 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve outboard motor. Powers center-console boats, larger pontoons, and offshore-capable fishing craft.
Quick Reference Specifications
| Specification |
Value |
| Engine Type |
4-Stroke, Inline 4-Cylinder, SOHC, 8-valve |
| Horsepower |
150 HP |
| Displacement |
3000 cc (3.0L / 183 CID) |
| Bore x Stroke |
96 mm x 103 mm (3.78 in. x 4.06 in.) |
| Spark Plug (Type & Gap) |
NGK ZFR5F |
| Engine Oil Capacity |
5.5 L (5.8 qt) |
| Recommended Engine Oil |
Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity |
980 mL (33.1 oz) |
| Idle Speed (in gear) |
650 ± 50 RPM (in gear) |
| Full Throttle RPM Range |
5000-6000 |
| Fuel |
Unleaded Gasoline, 87 Octane min. (90 RON, 10% Ethanol max) |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 150 Pro XS (2.5L):
-
Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
-
Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
-
Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
-
Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
-
Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 150 Pro XS (2.5L).
▶Accessories (2 parts)
| Ref |
OEM Part # |
Part Name |
| - |
84-859314A1 |
HARNESS ASSEMBLY |
| 0 |
84-8M0094239 |
ISOLATOR KIT, Battery |
▶Air Compressor Components, SN 1B884880 and below (43 parts)
| Ref |
OEM Part # |
Part Name |
| - |
25-832804A03 |
O-RING KIT |
| 1 |
8M0060053 |
COMPRESSOR KIT, Air Comment: Unpainted |
| 2 |
NSS |
NOT SOLD SEPARATE, Body |
| 3 |
1100-8M0050792 |
END CAP ASSEMBLY |
| 4 |
NSS |
NOT SOLD SEPARATE, Retaining Ring |
| 5 |
25-67206001 |
O-RING |
| 6 |
25-67206001 |
O-RING |
| 7 |
10-85593920 |
SCREW, (M6 x 20) |
| 8 |
653-833146T06 |
CONNECTING ROD ASSEMBLY |
| 9 |
NSS |
NOT SOLD SEPARATE, Bearing |
| 10 |
NSS |
NOT SOLD SEPARATE, Bearing |
| 11 |
NSS |
NOT SOLD SEPARATE, Piston Assembly - With Rings and Pin |
| 12 |
NSS |
NOT SOLD SEPARATE, Oil Scraper Ring |
| 13 |
NSS |
NOT SOLD SEPARATE, Top Ring |
| 14 |
NSS |
NOT SOLD SEPARATE, Oil Ring |
| 15 |
NSS |
NOT SOLD SEPARATE, Wrist Pin |
| 16 |
NSS |
NOT SOLD SEPARATE, Piston with Wrist Pin |
| 17 |
53-8348101 |
RING, Lock |
| 18 |
835088A10 |
REED PLATE ASSEMBLY |
| 19 |
25-67207 |
O-RING, (3.489 x .070) |
| 20 |
25-832804 |
O-RING, (2.739 x .070) |
| 21 |
26-828225 |
SEAL |
| 22 |
835087A04 |
HEAD KIT, Compressor |
| 23 |
22-8M0042974 |
FITTING, (1.87 Inches) |
| 24 |
10-82127335 |
SCREW, (M8 x 35 MM) |
| 25 |
13536A14 |
SENSOR ASSEMBLY, Temperature |
| 26 |
137151 |
RETAINER |
| 27 |
10-81893414 |
SCREW, (M8 x 14) |
| 28 |
25-831985 |
O-RING, (.468 x .078) |
| 29 |
22-151331 |
FITTING |
| 30 |
21-428641 |
FITTING, Check Valve |
| 31 |
22-856744 |
FITTING |
| 32 |
22-14868 |
FITTING |
| 33 |
NSS |
NOT SOLD SEPARATE, Decal-Assy. Instructions |
| 34 |
10-85593912 |
SCREW, (M6 x 12) |
| 35 |
25-855349002 |
GROMMET |
| 36 |
22-851975 |
FITTING, Elbow - 45 Degree - Brass (.125-27) |
| 37 |
10-4010825 |
SCREW, (M10 x 25) Hex Flange - Stainless Steel |
| 38 |
16-858762001 |
STUD, (.312-18/.312-24 x 4.190) |
| 39 |
12-854640 |
WASHER, Special |
| 40 |
11-46356 |
NUT, (.312-24) |
| 41 |
8M0175171 |
PULLEY |
| 42 |
54-8M0024533 |
CLAMP |
▶Air Compressor Components, SN 1B884881 and up (43 parts)
| Ref |
OEM Part # |
Part Name |
| - |
25-832804A03 |
O-RING KIT |
| 1 |
8M0060053 |
COMPRESSOR ASSEMBLY, Air Comment: Black |
| 2 |
NSS |
NOT SOLD SEPARATE, Body |
| 3 |
1100-8M0060381 |
END CAP ASSEMBLY |
| 4 |
10-8M0045380 |
SCREW, (M8 x 50) |
| 5 |
25-67206001 |
O-RING |
| 6 |
25-67206001 |
O-RING |
| 7 |
10-85593920 |
SCREW, (M6 x 20) |
| 8 |
653-833146T06 |
CONNECTING ROD ASSEMBLY |
| 9 |
NSS |
NOT SOLD SEPARATE, Bearing |
| 10 |
NSS |
NOT SOLD SEPARATE, Bearing |
| 11 |
NSS |
NOT SOLD SEPARATE, Piston Assembly - With Rings and Pin |
| 12 |
NSS |
NOT SOLD SEPARATE, Oil Scraper Ring |
| 13 |
NSS |
NOT SOLD SEPARATE, Top Ring |
| 14 |
NSS |
NOT SOLD SEPARATE, Oil Ring |
| 15 |
NSS |
NOT SOLD SEPARATE, Wrist Pin |
| 16 |
NSS |
NOT SOLD SEPARATE, Piston with Wrist Pin |
| 17 |
53-8348101 |
RING, Lock |
| 18 |
835088A10 |
REED PLATE ASSEMBLY |
| 19 |
25-67207 |
O-RING, (3.489 x .070) |
| 20 |
25-832804 |
O-RING, (2.739 x .070) |
| 21 |
26-828225 |
SEAL |
| 22 |
8M0073890 |
HEAD KIT, Compressor |
| 23 |
22-8M0042974 |
FITTING, (1.87 Inches) |
| 24 |
10-82127335 |
SCREW, (M8 x 35 MM) |
| 25 |
13536A14 |
SENSOR ASSEMBLY, Temperature |
| 26 |
137151 |
RETAINER |
| 27 |
10-81893414 |
SCREW, (M8 x 14) |
| 28 |
25-831985 |
O-RING, (.468 x .078) |
| 29 |
22-151331 |
FITTING |
| 30 |
21-428641 |
FITTING, Check Valve |
| 31 |
22-856744 |
FITTING |
| 32 |
22-14868 |
FITTING |
| 33 |
NSS |
NOT SOLD SEPARATE, Decal-Assy. Instructions |
| 34 |
10-85593912 |
SCREW, (M6 x 12) |
| 35 |
25-855349002 |
GROMMET |
| 36 |
22-851975 |
FITTING, Elbow - 45 Degree - Brass (.125-27) |
| 37 |
10-4010825 |
SCREW, (M10 x 25) Hex Flange - Stainless Steel |
| 38 |
16-858762001 |
STUD, (.312-18/.312-24 x 4.190) |
| 39 |
12-854640 |
WASHER, Special |
| 40 |
11-46356 |
NUT, (.312-24) |
| 41 |
8M0175171 |
PULLEY |
| 42 |
54-8M0024533 |
CLAMP |
▶Air Handler Components (23 parts)
| Ref |
OEM Part # |
Part Name |
| - |
8M0047660 |
AIR HANDLER ASSEMBLY |
| 1 |
855420A1 |
ADAPTOR PLATE KIT |
| 2 |
27-146973 |
GASKET |
| 3 |
27-8500581 |
GASKET |
| 4 |
8M0047661 |
REED BLOCK ASSEMBLY |
| 5 |
10-55715 |
SCREW, (.250-20 x .880) |
| 6 |
8M0185614 |
PUMP ASSEMBLY, Oil |
| 7 |
23-855364 |
BUSHING |
| 8 |
25-855362001 |
GROMMET |
| 9 |
10-81893435 |
SCREW, (M8 x 35) |
| 10 |
12-817274 |
WASHER, (.344 x 1.00 x .063) Stainless Steel |
| 11 |
850248A2 |
PLENUM KIT, Air |
| 12 |
10-81893430 |
SCREW, (M8 x 30) |
| 13 |
8M0148668 |
SENSOR ASSEMBLY |
| 14 |
25-896699 |
O-RING, (1.78 mm x .08 mm) |
| 15 |
10-883942 |
SCREW, (M4 x 16) |
| 16 |
855422A1 |
THROTTLE BODY KIT |
| 17 |
25-855423 |
O-RING |
| 18 |
10-82130040 |
SCREW, (M6 x 40) |
| 19 |
10-1993716 |
SCREW, (M6 x 16) |
| 20 |
854445 |
SENSOR, MAP |
| 21 |
884522 |
BRACKET, MAP Sensor |
| 22 |
892296 |
BRACKET |
▶Air Handler/Flywheel Cover (14 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
827325A10 |
COVER ASSEMBLY |
| 2 |
25-8M0153609 |
GROMMET |
| 3 |
35-853333T |
FILTER |
| 4 |
853352 |
COVER |
| 5 |
25-857101 |
GROMMET |
| 6 |
19-89219001 |
PLUG |
| 7 |
25-855613 |
GROMMET |
| 8 |
858953 |
BRACKET |
| 9 |
37-881865 |
DECAL, Caution-Start in Gear |
| 10 |
8M0082988 |
SENSOR |
| 11 |
10-40011107 |
SCREW, (M5 x 16) Stainless Steel |
| 12 |
17-8M0042972 |
PIN, Special (1.75 Inches) |
| 13 |
54-883080 |
J CLIP |
| 14 |
10-817504 |
SCREW, (.250-20 x 1.500) Stainless Steel |
▶Air Hoses (11 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
22-996642 |
FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 2 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 3 |
32-8M0108349 |
TUBING, (.312) (70.00 Inches Bulk), Cut to 6 Inches |
| 4 |
54-8M0214964 |
CLAMP, Hose (15.3) |
| 5 |
32-8502512 |
HOSE |
| 6 |
23-85687631 |
SLEEVE, (16.00 Inches) |
| 7 |
32-804823005 |
HOSE, Air Balance (15.00 Inches) |
| 8 |
32-804824 |
HOSE/FITTING ASSEMBLY |
| 9 |
804532 |
O-RING KIT |
| 10 |
22-16604 |
FITTING, Straight (.125-27) |
| 11 |
54-816311T |
TIE STRAP, (8.00 Inches) |
▶Bottom Cowl (34 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
100-8M0107321 |
BOTTOM COWL, Port |
| 2 |
103-834815A1 |
BOTTOM COWL, Starboard |
| 3 |
27-879147A11 |
GASKET SET, Bottom Cowl |
| 4 |
875266A2 |
RIGGING KIT |
| 5 |
859435T |
INSERT, Bottom |
| 6 |
859434T |
INSERT, Top |
| 7 |
859343 |
FOAM |
| 8 |
10-92799 |
SCREW, (#10-16 x 1.12) |
| 9 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 10 |
10-82130040 |
SCREW, (M6 x 40) |
| 11 |
831209 |
RETAINER |
| 12 |
19-821908 |
PLUG |
| 13 |
12-821915 |
WASHER |
| 14 |
8219631 |
CHECK VALVE |
| 15 |
25-30641 |
O-RING, (.299 x .103) |
| 16 |
22-821952 |
FITTING |
| 17 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 18 |
32-8M0039077 |
HOSE |
| 19 |
54-850896 |
CLAMP, (28.6) |
| 20 |
22-8320763 |
FITTING |
| 21 |
22-8M0077650 |
FITTING, Tell-Tale |
| 22 |
889847 |
BOOT, Idle Exhaust |
| 23 |
21-817519A1 |
CHECK VALVE ASSEMBLY, Drain |
| 24 |
87-8M0235191 |
SWITCH, Trim |
| 25 |
889740A02 |
HANDLE KIT |
| 26 |
10-8M0103805 |
SCREW, (M6 x 16 MM) Stainless Steel |
| 27 |
23-335891 |
BUSHING |
| 28 |
25-48462 |
O-RING, (.614 x .070) |
| 29 |
8219423 |
PAWL, Front Handle |
| 30 |
12-69057 |
WASHER, (.281 x .734 x .063) |
| 31 |
8M0111278 |
SEAL, Cowl (41.00 Inches) |
| 32 |
10-8214281 |
SCREW, (#10-16 x .625) |
| 33 |
54-822873 |
CLIP |
| 34 |
NSS |
NOT SOLD SEPARATE, Decal-Low Emission |
▶Coil Plate Assembly (28 parts)
| Ref |
OEM Part # |
Part Name |
| - |
879346A51 |
HARNESS ASSEMBLY, 5 Pin |
| 1 |
884271 |
PLATE, Coil Mounting |
| 2 |
23-8502341 |
BUSHING |
| 3 |
25-833155 |
GROMMET |
| 4 |
10-82129110 |
SCREW, (M6 x 10) |
| 5 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 6 |
54-899145 |
CLIP, Tie Strap |
| 7 |
84-858414A1 |
CABLE ASSEMBLY, Braided |
| 8 |
84-892910T03 |
HARNESS ASSEMBLY, Coil |
| 9 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 10 |
54-883066 |
CLIP, (.865) |
| 11 |
71-8M0157742 |
SENSOR |
| 12 |
22-8M0207782 |
FITTING |
| 13 |
32-85978571 |
TUBING, (52.00 Inches Bulk), Cut to 4 Inches |
| 14 |
22-875207 |
TEE, Fitting |
| 15 |
32-85978571 |
TUBING, (52.00 Inches Bulk), Cut to 5 Inches |
| 16 |
881879T11 |
SENSOR, Pressure (0 - 100 PSI) Comment: SN# 1B934546 & Below |
| 17 |
32-85944975 |
TUBING, (72.00 Inches Bulk), Cut to 14-1/2 Inches |
| 18 |
22-8M0214971 |
COUPLER |
| 19 |
32-85944975 |
TUBING, (72.00 Inches Bulk), Cut to 52 Inches |
| 20 |
339-8M0077473 |
COIL ASSEMBLY, Ignition |
| 21 |
10-82129125 |
SCREW, (M6 x 25 MM) |
| 22 |
84-881908T |
CABLE SET |
| 23 |
32-828547353 |
CONDUIT, (.350 Inside Diameter x 3.00 Feet Bulk) |
| 24 |
33-843220Q |
SPARK PLUG, (NGK#IZFR6J-11) |
| 25 |
10-60411 |
SCREW, (.312-18 x 1.250) |
| 26 |
12-8M0042642 |
WASHER, (.323 x .563 x .063) Stainless Steel |
| 27 |
12-49436 |
WASHER |
▶Crankshaft, Pistons and Connecting Rods (19 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
455-850690T2 |
CRANKSHAFT ASSEMBLY |
| 2 |
78662 |
WEAR SLEEVE |
| 3 |
30-67923T |
BEARING, Ball, Lower |
| 4 |
53-67446 |
RING |
| 5 |
54196A6 |
CARRIER ASSEMBLY |
| 6 |
65800 |
PACKING |
| 7 |
39-67377T |
RING, Sealing |
| 8 |
31-16756A6 |
BEARING KIT |
| 9 |
NSS |
NOT SOLD SEPARATE, Race |
| 10 |
700-859562A5 |
PISTON ASSEMBLY Comment: Port - .015 Oversize |
| 11 |
39-878106A12 |
RING SET, Piston Comment: .015 Oversize |
| 12 |
NSS |
NOT SOLD SEPARATE, Piston Ring-Lower |
| 13 |
53-8320811 |
LOCK RING |
| 14 |
600-877853A04 |
CONNECTING ROD ASSEMBLY |
| 15 |
10-763491 |
SCREW, (.312-24 x .875) |
| 16 |
12-8M0012299 |
THRUST WASHER |
| 17 |
8M0234886 |
BEARING KIT |
| 18 |
29-8M0204691 |
BEARING, Needle |
▶Cylinder Block and End Caps (41 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
884-858961A8 |
CYLINDER BLOCK ASSEMBLY |
| 2 |
16-8M0034455 |
STUD, (1.750 Inches) |
| 3 |
16-8M0034454 |
STUD, (.375-16/.375-24 x 6.870) |
| 4 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 5 |
17-8M0036405 |
PIN, BEARING RACE |
| 6 |
8M0111325 |
BRACKET |
| 7 |
10-828213 |
SCREW, (.312-18 x 1.500) Hex Flange |
| 8 |
76867 |
COVER, Bottom |
| 9 |
10-828214 |
SCREW, (.312-18 x 2.00) Hex Flange |
| 10 |
10-66717 |
SCREW, (.375-16 x 3.250) |
| 11 |
10-74824 |
SCREW, (.312-18 x 1.250) |
| 12 |
26852 |
CAP, Nylon |
| 13 |
10-856832 |
SCREW, (.250-20 x 1.750) |
| 14 |
11-64015 |
NUT, (.250-20) |
| 15 |
1159-832760T1 |
END CAP ASSEMBLY |
| 16 |
25-54029 |
O-RING, (2.800 x .103) |
| 17 |
31-16756A4 |
BEARING KIT |
| 18 |
NSS |
NOT SOLD SEPARATE, Bearing Race |
| 19 |
26-41953 |
SEAL |
| 20 |
10-881190 |
SCREW, (.312-18 x 1.00) |
| 21 |
1156-7809T1 |
END CAP ASSEMBLY |
| 22 |
25-62700 |
O-RING, (3.237 x .103) |
| 23 |
26-41953 |
SEAL |
| 24 |
10-28636 |
SCREW, (.250-20 x .750) |
| 25 |
13-26992 |
LOCKWASHER, (.250) Stainless Steel |
| 26 |
8538821 |
BRACKET, Throttle Position Indicator Mount |
| 27 |
8519371 |
LEVER, Throttle Position Indicator |
| 28 |
10-82130025 |
SCREW, (M6 x 25), Bracket to Crankcase |
| 29 |
23-856954 |
BUSHING |
| 30 |
12-65567 |
WASHER, (.265 x .750 x .048) Stainless Steel |
| 31 |
25-8M0190980 |
GROMMET |
| 32 |
8M6005165 |
INDICATOR, Throttle Position, Inside |
| 33 |
8582261 |
COVER, TPS |
| 34 |
10-8508281 |
SCREW, (#10-32 x 2.00), TPS to Bracket |
| 35 |
8M0084738 |
LINK ASSEMBLY |
| 36 |
84-88439A46 |
CABLE ASSEMBLY, Battery - Positive |
| 37 |
10-81893414 |
SCREW, (M8 x 14) |
| 38 |
84-93388A1 |
CABLE ASSEMBLY, (6.00 Inches) Black |
| 39 |
10-69035 |
SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel |
| 40 |
54-859172 |
CLAMP, Use where Applicable |
▶Cylinder Head (12 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
878110T1 |
CYLINDER HEAD ASSEMBLY Comment: Starboard |
| 2 |
10-8M0125882 |
SCREW, (.375-16 x 2.750) |
| 3 |
17-63779 |
PIN, Dowel (.250 x .625) |
| 4 |
27-8M0204714 |
GASKET |
| 5 |
8M0039353 |
COVER |
| 6 |
833072003 |
THERMOSTAT, 62°C (143°F) |
| 7 |
10-82130025 |
SCREW, (M6 x 25) |
| 8 |
8M0148668 |
SENSOR ASSEMBLY |
| 9 |
25-896699 |
O-RING, (1.78 mm x .08 mm) |
| 10 |
25-8M0149612 |
SEAL |
| 11 |
8597721 |
SEAL |
▶Deck Oil Fill Kit, 15969A3 or 15969A5 (9 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
15969A3 |
DECK FILL KIT, Oil, With Hose |
| 2 |
15969A13 |
DECK FILL KIT, Oil, With Out Hose |
| 3 |
15966 |
PLATE |
| 4 |
15969A08 |
DECK PLATE ASSEMBLY |
| 5 |
10-16324 |
SCREW, (#8 x .625) |
| 6 |
54-815504228 |
CLAMP, Worm Gear |
| 7 |
15967 |
ADAPTOR, Oil Filler |
| 8 |
25-11332 |
O-RING, (2.225 x .210) |
| 9 |
32-850719 |
HOSE, (100.00 Feet Bulk) , Oil Filler - Cut as Required |
▶Driveshaft Housing and Exhaust Tube (37 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
3503-813563T1 |
HOUSING, Driveshaft - Black - X-Long |
| 2 |
16-56295 |
STUD, (.437 x 2.69) |
| 3 |
10-898831 |
SCREW, (.500-20 x 6.220) |
| 4 |
88238A10 |
CABLE ASSEMBLY, Ground |
| 5 |
77327 |
MOUNT, Lower |
| 6 |
12-49339 |
WASHER, (.8125) |
| 7 |
11-898832 |
NUT, (.500-20) |
| 8 |
10-41508 |
SCREW, (.250-20 x .500) Stainless Steel |
| 9 |
12-45176 |
WASHER, (.453 x .812 x .105) Stainless Steel |
| 10 |
11-8M0204653 |
NUT, (.437-20) Stainless Steel |
| 11 |
54-8M0036782 |
CLAMP |
| 12 |
10-66727 |
SCREW, (.312-18 x 1.250) |
| 13 |
100-8M4500752 |
COVER |
| 14 |
10-88417 |
SCREW, (#12-24 x .620) |
| 15 |
11-35521 |
NUT |
| 16 |
12-48926 |
WASHER |
| 17 |
11-8M0204653 |
NUT, (.437-20) Stainless Steel |
| 18 |
12-20553 |
WASHER, (.406 x .734 x .063) |
| 19 |
11-69254 |
NUT |
| 20 |
8M0039081 |
BOOT, Idle Exhaust |
| 21 |
19-64649 |
PLUG |
| 22 |
27-991734 |
GASKET |
| 23 |
66350001 |
SEAL, Lower |
| 24 |
18276T |
TUBE, Exhaust |
| 25 |
8M0039076 |
SEAL, Upper |
| 26 |
8M0047679 |
EXTENSION ASSEMBLY, Exhaust |
| 27 |
10-8M0047146 |
SCREW, (0.25-20 x 1.50) |
| 28 |
12-35044 |
WASHER, (.281 x .625 x .065) Stainless Steel |
| 29 |
32-8M0042790 |
TUBE, Water Comment: X-Long |
| 30 |
18233A20 |
PLATE ASSEMBLY, Driveshaft Housing |
| 31 |
8M0043165 |
SEAL |
| 32 |
68011 |
BRACKET |
| 33 |
10-878608 |
SCREW, (#10-16 x .500) |
| 34 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 35 |
26-38970 |
SEAL |
| 36 |
27-183076 |
GASKET |
▶Dual Engine Tie Bar Kit (21 parts)
| Ref |
OEM Part # |
Part Name |
| - |
92876A9 |
EXTENSION KIT, Dual Engine |
| 1 |
71565A2 |
TUBE ASSEMBLY |
| 2 |
25-48462 |
O-RING, (.614 x .070) |
| 3 |
41055 |
MOUNT |
| 4 |
14-42100 |
TAB WASHER |
| 5 |
11-8M0041651 |
NUT, (.875-14) |
| 6 |
88404 |
TAB WASHER |
| 7 |
10-38601 |
SCREW, (.250-28 x 1.250) |
| 8 |
17729A1 |
BRACKET |
| 9 |
10-62055 |
SCREW, (.312-24 x 1.250) |
| 10 |
17728 |
TAB WASHER |
| 11 |
10-140001 |
SCREW, (.375-24 x 1.38) |
| 12 |
11-8M0204726 |
NUT, (.375-24) Stainless Steel |
| 13 |
8M0026167 |
STEERING EYE |
| 14 |
23-23651 |
SLEEVE, (1.625) |
| 15 |
97931 |
TUBING, (4.00 Inches) |
| 16 |
8M0026098 |
COUPLER, 15 In. |
| 17 |
11-42099 |
NUT, (.562-18) |
| 18 |
22-821169 |
COUPLING |
| 19 |
12-37828 |
WASHER, (.390 x .625 x .062) Stainless Steel |
| 20 |
10-94319 |
SCREW, (.375-24 x 1.5) |
▶Electrical Plate Assembly (29 parts)
| Ref |
OEM Part # |
Part Name |
| - |
879346A41 |
HARNESS ASSEMBLY, Throttle Position Sensor |
| 1 |
899071T01 |
PLATE |
| 2 |
54-899145 |
CLIP, Tie Strap |
| 3 |
10-82129114 |
SCREW, (M6 x 14) |
| 4 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 5 |
8M0207773 |
RELAY ASSEMBLY |
| 6 |
828102 |
BRACKET |
| 7 |
25-818967 |
GROMMET |
| 8 |
23-8M0214955 |
BUSHING |
| 9 |
10-82129125 |
SCREW, (M6 x 25 MM) |
| 10 |
84-892926T03 |
HARNESS ASSEMBLY, Engine |
| 11 |
85-875302A1 |
HOT STUD ASSEMBLY |
| 12 |
11-400213 |
NUT, (M8) Stainless Steel |
| 13 |
12-85172 |
WASHER |
| 14 |
84-93388T21 |
CABLE ASSEMBLY, Black |
| 15 |
84-8M0006811 |
CABLE ASSEMBLY, Starter |
| 16 |
84-878231A03 |
HARNESS ASSEMBLY, Fuse - 100 Ampere |
| 17 |
13-53166 |
LOCKWASHER, (.312) |
| 18 |
11-400213 |
NUT, (M8) Stainless Steel |
| 19 |
84-88439A46 |
CABLE ASSEMBLY, Battery - Positive |
| 20 |
89-817109A2 |
SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 21 |
25-822179 |
GROMMET |
| 22 |
23-8M0214955 |
BUSHING |
| 23 |
84-88807A16 |
CABLE ASSEMBLY, (4.00 Inches) Black |
| 24 |
10-32,11-45076 |
NUT, Brass |
| 25 |
10-32,11-813938 |
CAP NUT, |
| 26 |
11-8M0204668 |
NUT, (.312-18) |
| 27 |
84-819514T26 |
HARNESS ASSEMBLY, Trim |
| 28 |
54-816311T |
TIE STRAP, (8.00 Inches) |
▶Exhaust Manifold and Exhaust Plate (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
27-190506 |
GASKET |
| 2 |
828343A05 |
PLATE ASSEMBLY, Exhaust Divider |
| 3 |
26-814754 |
SEAL, (12.50 Inches) |
| 4 |
10-8263561 |
SCREW AND WASHER, (.312-18 x 1.500) |
| 5 |
10-881190 |
SCREW, (.312-18 x 1.00) |
| 6 |
8M0039767 |
COVER, Relief Valve |
| 7 |
10-31984 |
SCREW, (.312-18 x 1.375) |
| 8 |
10-69570 |
SCREW, (#10-16 x .750) |
| 9 |
12-76451 |
WASHER |
| 10 |
144791 |
DIAPHRAGM |
| 11 |
16496 |
DEFLECTOR, Water |
| 12 |
16497A1 |
PLATE |
| 13 |
27-78690002 |
GASKET |
| 14 |
24-42996 |
SPRING, (Stainless Steel) |
| 15 |
14480 |
POPPET |
| 16 |
25-64872 |
GROMMET |
| 17 |
65848 |
CARRIER |
| 18 |
27-991764 |
GASKET |
| 19 |
850814T4 |
PLATE, Exhaust |
| 20 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 21 |
8M0043164 |
SEAL |
| 22 |
680101 |
BRACKET |
| 23 |
10-878608 |
SCREW, (#10-16 x .500) |
| 24 |
25-19565002 |
GROMMET |
| 25 |
12-20553 |
WASHER, (.406 x .734 x .063) |
| 26 |
11-69254 |
NUT |
| 27 |
23-27132 |
BUSHING |
| 28 |
10-66727 |
SCREW, (.312-18 x 1.250) |
| 29 |
10-68783 |
SCREW, (.312-18 x 2.50) |
| 30 |
10-898833 |
SCREW, (.375-16 x 3.500) |
| 31 |
812905T |
BRACKET, Front |
| 32 |
10-8055571 |
SCREW, (.3125-18 x .50) |
| 33 |
12-187031 |
WASHER |
| 34 |
25-18778001 |
GROMMET |
| 35 |
18578T09 |
BRACKET ASSEMBLY, Rear |
| 36 |
25-12602002 |
GROMMET |
| 37 |
19-8M0033787 |
PLUG Comment: Jet |
▶Flywheel/Alternator (29 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0064021 |
ALTERNATOR KIT |
| 2 |
10-8M0012503 |
SCREW, (M10 x 100) Hex Flange - Stainless Steel |
| 3 |
10-40108120 |
SCREW, (M10 x 120) Hex Flange - Stainless Steel |
| 4 |
12-8M0042641 |
WASHER, (.390 x 1.00 x .06) |
| 5 |
23-856975 |
MOUNT |
| 6 |
858391T01 |
BRACKET |
| 7 |
12-845998 |
WASHER, (.406 x 1.250 x .089) |
| 8 |
858393T01 |
BRACKET |
| 9 |
11-826292 |
NUT, (M10) Brass/Nickel Plated |
| 10 |
10-82446155 |
SCREW, (M10 x 55) |
| 11 |
84-856583T2 |
CABLE ASSEMBLY |
| 12 |
17-8M0042972 |
PIN, Special (1.75 Inches) |
| 13 |
857142T |
BRACKET |
| 14 |
10-812618 |
SCREW, (.312-18 x 1.00) Stainless Steel With Nylon Patch |
| 15 |
24-855798001 |
SPRING |
| 16 |
856815T2 |
ARM TENSIONER ASSEMBLY |
| 17 |
16-8M0034457 |
STUD, (M10 x 85) |
| 18 |
11-826292 |
NUT, (M10) Brass/Nickel Plated |
| 19 |
23-8568941 |
BUSHING |
| 20 |
12-4002320 |
WASHER |
| 21 |
8M6005030 |
PULLEY ASSEMBLY |
| 22 |
10-4010835 |
SCREW, (M10 x 35) Hex Flange - Stainless Steel |
| 23 |
57-828507Q4 |
BELT |
| 24 |
281-859734T1 |
FLYWHEEL |
| 25 |
11-52901 |
NUT, (.625-18) |
| 26 |
12-33001 |
WASHER, (.641 x 1.250 x .190) |
| 27 |
19-45907 |
PLUG, Yellow |
| 28 |
11-401386 |
NUT, (M6) Stainless Steel |
| 29 |
12-4002319 |
WASHER |
▶Fuel Hoses (14 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 2 |
54-8M0214964 |
CLAMP, Hose (15.3) |
| 3 |
22-858955 |
CONNECTOR |
| 4 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk), Cut to 7-1/2 Inches |
| 5 |
32-8M0064784 |
HOSE, To Fuel Pump |
| 6 |
32-8M0062344 |
HOSE ASSEMBLY, (25.50 Inches) |
| 7 |
32-804822 |
HOSE, Fuel Return |
| 8 |
32-804821005 |
HOSE, Fuel Balance (16.00 Inches) |
| 9 |
25-804840 |
O-RING KIT |
| 10 |
32-8M0064634 |
HOSE |
| 11 |
32-8M0064635 |
HOSE |
| 12 |
23-85686953 |
SLEEVE, (27.00 Inches Bulk) |
| 13 |
54-8M0214911 |
CLAMP, (15.7) |
| 14 |
21-8557611 |
CHECK VALVE |
▶Fuel Pump (23 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
NSS |
NOT SOLD SEPARATE, Body-Fuel Pump |
| 2 |
21-857005A1 |
DIAPHRAGM KIT |
| 3 |
NSS |
NOT SOLD SEPARATE, Diaphragm |
| 4 |
NSS |
NOT SOLD SEPARATE, Retainer |
| 5 |
NSS |
NOT SOLD SEPARATE, Spring |
| 6 |
NSS |
NOT SOLD SEPARATE, Cap |
| 7 |
NSS |
NOT SOLD SEPARATE, Spring |
| 8 |
NSS |
NOT SOLD SEPARATE, Cap |
| 9 |
NSS |
NOT SOLD SEPARATE, Diaphragm |
| 10 |
NSS |
NOT SOLD SEPARATE, Gasket-Boost |
| 11 |
NSS |
NOT SOLD SEPARATE, Gasket-Pulse |
| 12 |
27-8M0204705 |
GASKET |
| 13 |
987752 |
PLATE |
| 14 |
22-996642 |
FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 15 |
10-82104540 |
SCREW, (M5 x 40) |
| 16 |
10-82130050 |
SCREW, (M6 x 50), Pump to Crankcase |
| 17 |
144303 |
BASE |
| 18 |
22-291112 |
FITTING |
| 19 |
22-782792 |
FITTING, Elbow 45 Degree (1.25) |
| 20 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 21 |
32-8M0043979 |
HOSE AND SLEEVE ASSEMBLY, (18.00 Inches) |
| 22 |
22-822769 |
CONNECTOR |
▶Fuel Rails (33 parts)
| Ref |
OEM Part # |
Part Name |
| - |
8M0185153 |
FUEL RAIL ASSEMBLY, Complete |
| 1 |
NSS |
NOT SOLD SEPARATE, Fuel Rail (Port) |
| 2 |
NSS |
NOT SOLD SEPARATE, Fuel Rail (Starboard) |
| 3 |
54-804830 |
CLAMP |
| 4 |
10-804525001 |
SCREW PACKAGE, (2 Per)(M5 x 10) |
| 5 |
8M0047053 |
VALVE ASSEMBLY, (.375 Inch Diameter) |
| 6 |
25-804840 |
O-RING KIT |
| 7 |
22-805515 |
CAP, Shrader Valve - Brass |
| 8 |
19-804835 |
PLUG (Port) |
| 9 |
8M0041097 |
CLAMP |
| 10 |
54-8048311 |
CLAMP |
| 11 |
8M0222157 |
INJECTOR |
| 12 |
25-804530 |
O-RING KIT |
| 13 |
25-804529 |
O-RING KIT |
| 14 |
804522 |
CLAMP |
| 15 |
54-880808 |
CLAMP |
| 16 |
880807T04 |
REGULATOR, Air |
| 17 |
25-880809 |
O-RING KIT |
| 18 |
54-804832 |
CLAMP |
| 19 |
804526 |
SCREW PACKAGE, (M5 x 16) (2 Per) |
| 20 |
804535001 |
COVER |
| 21 |
24-804534 |
SPRING |
| 22 |
804533 |
DIAPHRAGM ASSEMBLY |
| 23 |
25-804536 |
O-RING |
| 24 |
19-804834 |
PLUG (Starboard) |
| 25 |
22-804836 |
FITTING |
| 26 |
804532 |
O-RING KIT |
| 27 |
8M6001744 |
INJECTOR ASSEMBLY, Air |
| 28 |
26-804875 |
SEAL KIT, Direct Injector |
| 29 |
16-8M0063255 |
STUD, (M10 x 91) |
| 30 |
11-826292 |
NUT, (M10) Brass/Nickel Plated |
| 31 |
12-859404002 |
WASHER, Injection |
| 32 |
54-899145 |
CLIP, Tie Strap |
▶Gasket Set Components-Complete-Powerhead and Lower Unit (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-782461 |
GASKET, Exhaust Diffuser Comment: Not used for this application |
▶Gear Housing, Driveshaft (49 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 0 |
1647-9148T85 |
GEAR HOUSING ASSEMBLY, Complete (4.75 Inch/120.65 mm Torpedo Diameter) Comment: Standard - X-Long - 1.87:1 |
| 1 |
1647-9148T93 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
17-43044 |
PIN, Dowel - Without Hole (.375 x .625) |
| 3 |
16-8M0034464 |
STUD, (.438 x 3.82 Inches) Comment: X-Long |
| 4 |
16-8M0133358 |
STUD, (.437-14/.437-20 x 2.060) |
| 5 |
16-8M0034463 |
STUD, (.312-18/.324-24 x 3.380) |
| 6 |
16-306671 |
STUD, (.250-20/.250-28 x 3.125) |
| 7 |
8M0039169 |
FILLER BLOCK |
| 8 |
31-42647A1 |
BEARING ASSEMBLY, Roller |
| 9 |
97-826134Q |
ANODE |
| 10 |
10-4000333 |
SCREW, (M6 x 40) |
| 11 |
11-401386 |
NUT, (M6) Stainless Steel |
| 12 |
22-881866 |
FITTING |
| 13 |
23-29804T |
SLEEVE |
| 14 |
NSS |
NOT SOLD SEPARATE, Pinion Gear Comment: 1.87:1- 15 Teeth |
| 15 |
12-92721 |
WASHER |
| 16 |
11-35921 |
NUT, (.625-18) |
| 17 |
15-42637A1 |
SHIM SET |
| 18 |
10-79953Q04 |
SCREW KIT, Drain |
| 19 |
26-8M0204693 |
SEAL |
| 20 |
789022 |
SHIFT SHAFT |
| 21 |
25-25439 |
O-RING, (.862 x .103) |
| 22 |
23-77631A2 |
BUSHING ASSEMBLY |
| 23 |
26-8M0204708 |
SEAL, Oil |
| 24 |
12-77674 |
WASHER |
| 25 |
45-897625T |
DRIVESHAFT, X-Long |
| 26 |
31-8M0146566 |
BEARING ASSEMBLY, Roller/Cup |
| 27 |
NSS |
NOT SOLD SEPARATE, Cup |
| 28 |
8245191 |
RETAINER |
| 29 |
46-8M0077147 |
BASE ASSEMBLY, Water Pump |
| 30 |
NSS |
NOT SOLD SEPARATE, Retainer |
| 31 |
27-8M0204678 |
GASKET |
| 32 |
25-8M0142854 |
O-RING, (2.175 x .175) |
| 33 |
26-89238 |
SEAL, Oil |
| 34 |
26-16977 |
SEAL, Oil |
| 35 |
27-8M0090319 |
GASKET, Lower |
| 36 |
27-858524 |
GASKET |
| 37 |
8M0204677 |
FACE PLATE |
| 38 |
46-96148T1 |
BODY ASSEMBLY, Water Pump |
| 39 |
48752T |
INSERT |
| 40 |
26-38970 |
SEAL |
| 41 |
47-89984T3 |
IMPELLER |
| 42 |
28-8M0214992 |
KEY |
| 43 |
10-8M0215009 |
SCREW, (#14-8 x 2.25) |
| 44 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 45 |
11-8267119 |
NUT, (.250-28) |
| 46 |
12-36001 |
WASHER |
| 47 |
11-13436 |
NUT |
▶Gear Housing, Propeller Shaft (33 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0046714 |
GASKET SET, Engine |
| 1 |
1647-9148T93 |
GEAR HOUSING ASSEMBLY, Basic |
| 2 |
89594A1 |
FOLLOWER ASSEMBLY |
| 3 |
789562 |
SHIFT CAM |
| 4 |
828287 |
ROD |
| 5 |
43-803615T2 |
GEAR ASSEMBLY, Pinion/Forward Comment: 1.87:1 Gear Ratio |
| 6 |
15-44491A1 |
SHIM SET |
| 7 |
31-30894A1 |
BEARING SET, Cup And Cone |
| 8 |
NSS |
NOT SOLD SEPARATE, Cup |
| 9 |
31-30895T |
BEARING, Needle |
| 10 |
53-856823 |
RING, Retaining |
| 11 |
52-859340T |
CLUTCH |
| 12 |
17-8M0100263 |
PIN, Cross |
| 13 |
17-828356 |
PIN, Detent |
| 14 |
24-30893 |
SPRING |
| 15 |
44-94148 |
PROPELLER SHAFT |
| 16 |
43-828175A1 |
GEAR ASSEMBLY, Reverse - 15/28 Comment: 1.87:1 Gear Ratio |
| 17 |
23-824108 |
SPACER |
| 18 |
681001 |
RING, Thrust |
| 19 |
30-88957T |
BEARING, Ball |
| 20 |
25-8M0214920 |
O-RING |
| 21 |
43567T1 |
CARRIER ASSEMBLY, Bearing |
| 22 |
31-30956T |
BEARING, Needle |
| 23 |
26-14077 |
SEAL, Oil, Inside |
| 24 |
26-8M0204670 |
SEAL, Outside |
| 25 |
28-30281 |
KEY |
| 26 |
14-79447 |
TAB WASHER |
| 27 |
8M2011027 |
RETAINER |
| 28 |
97-76214A6 |
ANODE KIT Comment: Magneseum |
| 29 |
10-8M0204686 |
SCREW, (.437-14 x 1.750) |
| 30 |
10-65210 |
SCREW, (.375-16 x 1.00) |
| 31 |
12-45176 |
WASHER, (.453 x .812 x .105) Stainless Steel |
| 32 |
11-8M0204653 |
NUT, (.437-20) Stainless Steel |
▶Mercathode Kit (15 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
88334A2 |
MERCATHODE KIT |
| 2 |
88334A4 |
MERCATHODE ASSEMBLY |
| 3 |
10-22793 |
SCREW, (#9-14 x .875) |
| 4 |
12-30164 |
WASHER, (.192 x .375 x .0312) Stainless Steel |
| 5 |
10-32,11-45076 |
NUT, Brass |
| 6 |
72958A5 |
ELECTRODE ASSEMBLY |
| 7 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 8 |
10-87698 |
SCREW, (#10-16 x 1.250) Stainless Steel |
| 9 |
97-72957A5 |
ANODE ASSEMBLY |
| 10 |
25-8M0204645 |
O-RING, (.796 x .139) |
| 11 |
10-87698 |
SCREW, (#10-16 x 1.250) Stainless Steel |
| 12 |
88-8M0207796 |
FUSE, 20 Ampere |
| 13 |
84-95084A10 |
CABLE ASSEMBLY, (5.00 Inches) Red |
| 14 |
84-95084A13 |
CABLE ASSEMBLY, (64.00 Inches) |
| 15 |
84-79138A8 |
CABLE ASSEMBLY, (72.00 Inches) Black |
▶Oil Injection Components (30 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 24 Inches |
| 2 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 18-1/2 Inches |
| 3 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 16-1/2 Inches |
| 4 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 24-1/2 Inches |
| 5 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 27 Inches |
| 6 |
21-858805 |
CHECK VALVE |
| 7 |
8M0214940 |
TIE STRAP, (5.50 Inches) |
| 8 |
56762 |
TIE STRAP, (4.00 Inches) |
| 9 |
32-892830053 |
HOSE, (24.00 Inches Braided) |
| 10 |
32-8M0054213 |
HOSE, (40.00 Inches Bulk), Cut to 32 Inches |
| 11 |
21-8781051 |
CHECK VALVE, To Block |
| 12 |
22-8M0207780 |
FITTING |
| 13 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk), Cut to 6 Inches |
| 14 |
NSS |
NOT SOLD SEPARATE, Cap |
| 15 |
32-875289 |
HOSE |
| 16 |
22-858955 |
CONNECTOR |
| 17 |
35-875284T01 |
FILTER, Oil - In Line |
| 18 |
32-875283 |
HOSE, (2.00 Inches) |
| 19 |
1200-8M0063190 |
RESERVOIR ASSEMBLY |
| 20 |
NSS |
NOT SOLD SEPARATE, Decal-Reservoir |
| 21 |
25-855362001 |
GROMMET |
| 22 |
12-49436 |
WASHER |
| 23 |
10-60411 |
SCREW, (.312-18 x 1.250) |
| 24 |
23-855364 |
BUSHING |
| 25 |
87-856156T02 |
SWITCH ASSEMBLY |
| 26 |
10-58376 |
SCREW, (.164-18 x .375) |
| 27 |
12-72761 |
WASHER, (.203 x .562 x .060) Stainless Steel |
| 28 |
54-814634 |
CLAMP |
| 29 |
32-8M0108355 |
HOSE, (57.00 Inches Bulk), Cut to 4-3/4 Inches |
| 30 |
22-858955 |
CONNECTOR |
▶Oil Lines (14 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 30 Inches |
| 2 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 25 Inches |
| 3 |
22-887801 |
FITTING, Elbow 90 Degree (.0625-27) |
| 4 |
21-8592352 |
CHECK VALVE, 90 Degree (.0625-27) |
| 5 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 16-1/2 Inches |
| 6 |
22-151333 |
FITTING |
| 7 |
8M0214940 |
TIE STRAP, (5.50 Inches) |
| 8 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 22 Inches |
| 9 |
22-59169003 |
FITTING, Tee |
| 10 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 1-1/2 Inches |
| 11 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 4 -3/4 Inches |
| 12 |
32-8M0054152 |
TUBING, (38.00 Inches Bulk), Cut to 3-1/2 Inches |
| 13 |
21-426233 |
CHECK VALVE |
| 14 |
21-426982 |
CHECK VALVE |
▶PCM Mounting (11 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0073375 |
PCM, Propulsion Control Module (150 ProXS) Comment: SN# 1B934546 & Up |
| 2 |
10-82130025 |
SCREW, (M6 x 25) |
| 3 |
12-65567 |
WASHER, (.265 x .750 x .048) Stainless Steel |
| 4 |
25-8M0190980 |
GROMMET |
| 5 |
23-856954 |
BUSHING |
| 6 |
54-891520001 |
CLIP |
| 7 |
10-82129114 |
SCREW, (M6 x 14) |
| 8 |
10-82130012 |
SCREW, (M6 x 12) |
| 9 |
830796A04 |
CONNECTOR ASSEMBLY, Weather Cap - Male |
| 10 |
877613A02 |
CONNECTOR ASSEMBLY, Weather Cap 6 Pin |
| 11 |
830796A03 |
CONNECTOR ASSEMBLY, Weather Cap - 2 Pin Male Comment: Jet |
▶Power Trim Components (38 parts)
| Ref |
OEM Part # |
Part Name |
| - |
855998A11 |
POWER TRIM ASSEMBLY, Complete |
| 1 |
878265A4 |
TRIM MOTOR |
| 2 |
NSS |
NOT SOLD SEPARATE, Armature |
| 3 |
NSS |
NOT SOLD SEPARATE, End Frame |
| 4 |
10-82494830 |
SCREW, (M6 x 30) |
| 5 |
13-400256 |
LOCKWASHER, (M6) |
| 6 |
8782451 |
DRIVESHAFT |
| 7 |
878410A1 |
PO CHECK KIT |
| 8 |
893929A01 |
MANUAL RELEASE ASSEMBLY, Includes Reference #26 |
| 9 |
8M0142997 |
SHAFT KIT |
| 10 |
17-878267 |
PIN |
| 11 |
878235A03 |
TILT CYLINDER ASSEMBLY |
| 12 |
878239A02 |
GUIDE KIT, Includes Reference #26 |
| 13 |
8M0142999 |
O-RING KIT, Includes Reference #26 |
| 14 |
8M0168219 |
SHOCK ROD KIT, Includes Reference #26 |
| 15 |
8M0143000 |
PISTON ASSEMBLY, Memory |
| 16 |
878406A02 |
REPAIR KIT, Check Valve, Includes Reference #26 |
| 17 |
878414T01 |
PISTON ASSEMBLY |
| 18 |
878413A1 |
PISTON ASSEMBLY |
| 19 |
1100-8M0021648 |
GUIDE ASSEMBLY |
| 20 |
878264A1 |
RESERVOIR KIT |
| 21 |
19-811613 |
PLUG ASSEMBLY |
| 22 |
10-4000327 |
SCREW, (M6 x 14) |
| 23 |
12-4002315 |
WASHER |
| 24 |
892251A01 |
PUMP KIT |
| 25 |
878408A1 |
REPAIR KIT, Power Trim |
| 26 |
17-821539 |
PIN, Trilobe |
| 27 |
10-858771 |
SCREW, (M10 x 30) |
| 28 |
12-4002319 |
WASHER |
| 29 |
97-818298Q1 |
ANODE KIT |
| 30 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 31 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 32 |
99625002 |
SHAFT |
| 33 |
8M0084613 |
C WASHER |
| 34 |
54-26550 |
CLAMP |
| 35 |
10-878609 |
SCREW, (#10-16 x .600) |
| 36 |
32-828547353 |
CONDUIT, (.350 Inside Diameter x 3.00 Feet Bulk), Cut to 12 Inches |
| 37 |
54-816311T |
TIE STRAP, (8.00 Inches) |
▶Service/Support Material (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
61-8M0060220 |
POWERHEAD ASSEMBLY Comment: 150 Pro XS |
▶Starter Motor (14 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
50-892339T01 |
STARTER MOTOR ASSEMBLY |
| 2 |
NSS |
NOT SOLD SEPARATE, Thru Bolt |
| 3 |
43-880805A1 |
GEAR KIT |
| 4 |
809463A1 |
SOLENOID KIT |
| 5 |
8M0065258 |
BRUSH SET |
| 6 |
10-69035 |
SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel |
| 7 |
84-93388A1 |
CABLE ASSEMBLY, (6.00 Inches) Black |
| 8 |
37-8272822 |
DECAL, Warning |
| 9 |
13-400255 |
LOCKWASHER, (M5) |
| 10 |
11-400211 |
NUT, (M5) Stainless Steel |
| 11 |
13-8M0204647 |
LOCKWASHER, (.312) |
| 12 |
11-400213 |
NUT, (M8) Stainless Steel |
| 13 |
23-8M0034918 |
COLLAR |
| 14 |
8M0043276 |
STOP |
▶Swivel Bracket and Steering Arm (31 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
1499-8M0102865 |
SWIVEL BRACKET ASSEMBLY, Black |
| 2 |
25-8M0214926 |
O-RING |
| 3 |
23-818764 |
BUSHING |
| 4 |
23-816039 |
SPACER |
| 5 |
26-87735 |
SEAL, Oil, Lower |
| 6 |
22-8M0169589 |
FITTING, Grease |
| 7 |
23-821207 |
BUSHING |
| 8 |
12-816432 |
THRUST WASHER |
| 9 |
878182T01 |
YOKE, Bottom |
| 10 |
53-67684 |
RING, Retaining |
| 11 |
8M0045383 |
STRIKER PLATE |
| 12 |
13-58643 |
LOCKWASHER, (.375) |
| 13 |
11-46335 |
NUT, (.375-24) |
| 14 |
10-64014 |
SCREW, (.250-28 x .500) |
| 15 |
NSS |
NOT SOLD SEPARATE, Decal-Serial Overlaminate |
| 16 |
8M0074846 |
SENDER ASSEMBLY, Trim, Analog |
| 17 |
10-852368 |
SCREW, (#10-24 x .750) |
| 18 |
10,13-26996 |
LOCKWASHER, Stainless Steel |
| 19 |
12-89302 |
WASHER, (.203 x .406 x .040) |
| 20 |
17-8M0132731 |
SWIVEL PIN ASSEMBLY, Steering Arm - Stainless Steel |
| 21 |
10-8M0176309 |
SCREW, (.437-20 x 7.500) |
| 22 |
8M0000516 |
BUMPER, Top Yoke |
| 23 |
77326 |
MOUNT |
| 24 |
12-66921 |
WASHER |
| 25 |
12-78688 |
WASHER |
| 26 |
11-8M0204653 |
NUT, (.437-20) Stainless Steel |
| 27 |
92876A12 |
LINK ROD ASSEMBLY |
| 28 |
10-849838 |
SCREW, (.375-24 x 1.250) |
| 29 |
11-8M0204726 |
NUT, (.375-24) Brass |
| 30 |
12-37828 |
WASHER, (.390 x .625 x .062) Stainless Steel |
| 31 |
54-816311T |
TIE STRAP, (8.00 Inches) |
▶Throttle Lever and Shift Shaft (46 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0040990 |
LEVER, Throttle Control |
| 2 |
10-818165 |
SCREW, (.375-16 x 1.75) |
| 3 |
23-55164 |
BUSHING |
| 4 |
23-858959 |
SPACER |
| 5 |
10-64022 |
SCREW, (.250-20 x 2.125) |
| 6 |
11-64015 |
NUT, (.250-20) |
| 7 |
26852 |
CAP, Nylon |
| 8 |
42927 |
INSERT |
| 9 |
12-35459 |
WASHER |
| 10 |
11-401386 |
NUT, (M6) Stainless Steel |
| 11 |
814283T6 |
BRACKET ASSEMBLY, Anchor |
| 12 |
98889 |
LATCH |
| 13 |
10-42975 |
DRIVE SCREW |
| 14 |
39519 |
CUP |
| 15 |
52100 |
WEAR PLATE |
| 16 |
8M0036768 |
LATCH |
| 17 |
12-35462 |
WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 18 |
11-826709109 |
NUT, (.250-28) Stainless Steel |
| 19 |
10-28782 |
SCREW, (.312-18 x .880) Stainless Steel |
| 20 |
814284 |
GUIDE BLOCK |
| 21 |
24-20099 |
SPRING |
| 22 |
67073A1 |
LINK ROD ASSEMBLY |
| 23 |
79932A17 |
SHIFT SHAFT ASSEMBLY Comment: X-LONG |
| 24 |
NSS |
NOT SOLD SEPARATE, Roll Pin |
| 25 |
NSS |
NOT SOLD SEPARATE, Shift Shaft Lever-Upper |
| 26 |
23-26856 |
BUSHING |
| 27 |
13-29720 |
WAVE WASHER |
| 28 |
12-35462 |
WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 29 |
11-826709109 |
NUT, (.250-28) Stainless Steel |
| 30 |
87-8M0207794 |
SWITCH |
| 31 |
10-77478 |
SCREW, (#6-32 x .875) |
| 32 |
12-27882 |
WASHER |
| 33 |
23-8M0215006 |
BUSHING |
| 34 |
8508152 |
ROD |
| 35 |
8562211 |
CAM |
| 36 |
23-856895 |
BUSHING |
| 37 |
30-856896 |
BEARING |
| 38 |
10-81893440 |
SCREW, (M8 x 40) |
| 39 |
850286A03 |
LEVER/ROLLER KIT, Throttle |
| 40 |
8M0072162 |
ROLLER |
| 41 |
12-8M0204666 |
WASHER, (.203 x .500 x .032) |
| 42 |
8-32,11-826709104 |
NUT, Stainless Steel |
| 43 |
10-889354 |
SCREW, Special |
| 44 |
12-881992 |
WASHER, Spool |
| 45 |
10,13-69432 |
LOCKWASHER, External |
| 46 |
12-881991 |
WASHER, Cupped |
▶Tools (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
90-8M0047641 |
PARTS MANUAL, 150 Pro XS (2.5L) |
▶Top Cowl (25 parts)
| Ref |
OEM Part # |
Part Name |
| - |
37-8M0065744 |
DECAL, Horsepower (150) Comment: SN# 1B934546 & Up |
| 1 |
100-8M0075375 |
TOP COWL ASSEMBLY, Mariner, Without decals |
| 2 |
10-82130020 |
SCREW, (M6 x 20) |
| 3 |
883019A02 |
SOUND BLANKET KIT |
| 4 |
NSS |
NOT SOLD SEPARATE, Sound Blanket-Port |
| 5 |
NSS |
NOT SOLD SEPARATE, Sound Blanket-Starboard |
| 6 |
NSS |
NOT SOLD SEPARATE, Sound Blanket-Rear |
| 7 |
831207A16 |
HANDLE KIT, Cowl Latch |
| 8 |
23-812707 |
BUSHING |
| 9 |
23-8312141 |
SPACER |
| 10 |
12-8M0042643 |
WASHER, (.520 x .850 x .060) Nylon - Black |
| 11 |
13-12134 |
WASHER, Wave |
| 12 |
8M0001081 |
CAM |
| 13 |
12-8M0214930 |
WASHER |
| 14 |
10-8M0174577 |
SCREW, (M6 x 16), Included with Handle Kit |
| 15 |
8M0036792 |
BRACKET, Front |
| 16 |
815477 |
BUMPER, Latch |
| 17 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 18 |
11-401366 |
NUT, (M6) Stainless Steel |
| 19 |
53-8237951 |
RING, Retaining |
| 20 |
8M0207770 |
ROLLER |
| 21 |
8155381 |
PIN, Roll |
| 22 |
12-8M0204649 |
WASHER, (.281 x .500 x .060) Stainless Steel |
| 23 |
NSS |
NOT SOLD SEPARATE, Decal-Counter Rotation |
| 24 |
NSS |
NOT SOLD SEPARATE, Decal-Break-In |
▶Transom Brackets (21 parts)
| Ref |
OEM Part # |
Part Name |
| - |
3425-828333A09 |
TRANSOM BRACKET KIT |
| 1 |
NSS |
NOT SOLD SEPARATE, Transom Bracket-Starboard |
| 2 |
NSS |
NOT SOLD SEPARATE, Transom Bracket-Port |
| 3 |
22-8M0169588 |
FITTING, Grease, Port |
| 4 |
826125A1 |
TILT TUBE |
| 5 |
11-826135 |
NUT, (1.00-14) Nylon Insert |
| 6 |
25-45711 |
O-RING, (.612 x .103) |
| 7 |
13-88750 |
WASHER |
| 8 |
11-826164 |
NUT, (.875-14) |
| 9 |
10-8M0204730 |
SCREW, (.500-20 x 5 Inches) |
| 10 |
12-8M0204665 |
WASHER, (.530 x .870 x .105) Stainless Steel |
| 11 |
12-8M0204648 |
WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 12 |
11-82671117 |
NUT, (.500-20) |
| 13 |
8M0115104 |
LEVER ASSEMBLY, Tilt Lock |
| 14 |
24-830899 |
SPRING, Tension |
| 15 |
23-65830 |
NYLINER |
| 16 |
24-830900 |
SPRING, Compression |
| 17 |
99633 |
KNOB |
| 18 |
17-99615 |
PIN, Groove |
| 19 |
17-893709 |
PIN |
| 20 |
37-8M0043059 |
DECAL, Warning |
▶Vapor Separator Components (40 parts)
| Ref |
OEM Part # |
Part Name |
| - |
859174T06 |
VAPOR SEPARATOR ASSEMBLY, Complete |
| 1 |
8M6004919 |
COVER KIT |
| 2 |
22-8554246 |
FITTING |
| 3 |
22-881740 |
FITTING, Straight |
| 4 |
19-883208 |
PLUG |
| 5 |
27-883252 |
GASKET |
| 6 |
26-803878 |
SEAL, Pump |
| 7 |
1395-808612 |
SCREW AND WASHER, (#8-32 x .750) |
| 8 |
22-885186A1 |
FITTING KIT |
| 9 |
25-831985 |
O-RING, (.468 x .078) |
| 10 |
84-881831 |
WIRE ASSEMBLY |
| 11 |
855427A1 |
PUMP KIT |
| 12 |
8M6000589 |
SLEEVE |
| 13 |
8M6004920 |
FLOAT KIT |
| 14 |
F10064 |
SHAFT |
| 15 |
8M6004917 |
VALVE, Needle |
| 16 |
10-883223 |
SCREW, (M6 x 16) |
| 17 |
8M6004918 |
SEAT/VALVE |
| 18 |
889318002 |
BAFFLE, Fuel |
| 19 |
10-883223 |
SCREW, (M6 x 16) |
| 20 |
35-18458T4 |
FILTER KIT |
| 21 |
8M0204710 |
PROBE |
| 22 |
855434T04 |
BOWL KIT |
| 23 |
22-880862A1 |
FITTING KIT |
| 24 |
25-880863 |
O-RING |
| 25 |
19-855435A1 |
PLUG KIT |
| 26 |
25-8M0062785 |
O-RING |
| 27 |
26-8554331 |
SEAL, Pump |
| 28 |
22-8554245 |
ELBOW |
| 29 |
8M0047624 |
PUMP ASSEMBLY |
| 30 |
22-855802A1 |
ELBOW |
| 31 |
25-883551 |
O-RING |
| 32 |
855756A1 |
BRACKET KIT |
| 33 |
10-1993716 |
SCREW, (M6 x 16) |
| 34 |
54-850181 |
TIE STRAP, (11.750 Inches) |
| 35 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 36 |
25-856928 |
GROMMET |
| 37 |
22-880862A1 |
FITTING KIT |
| 38 |
25-880863 |
O-RING |
| 39 |
10-82130010 |
SCREW, (M6 x 10) |
▶Visual Warning Kit, 17334A2 (7 parts)
| Ref |
OEM Part # |
Part Name |
| NS |
10-32,11-27164 |
NUT AND LOCKWASHER, |
| 1 |
17334A2 |
VISUAL WARNING SYSTEM |
| 2 |
88-17429 |
LAMP |
| 3 |
76424 |
BRACKET, Switch Mounting |
| 4 |
16-55422 |
STUD, (#10-32 x 2.00) |
| 5 |
12-24676 |
WASHER, (.200 x .440 x .032) |
| 6 |
10-32,11-68219 |
NUT, Stainless Steel |
▶Water Hoses (29 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
22-8603001 |
FITTING |
| 2 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 3 |
32-77653101 |
HOSE, (48.00 Inches Bulk), Cut to 20 Inches |
| 4 |
22-687271 |
FITTING, (.250-18) 90 Degree - Brass |
| 5 |
22-996642 |
FITTING, Elbow 90 Degree (.125-27 x .250) Nylon |
| 6 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 7 |
32-85833939 |
HOSE, (17.00 Inches Bulk), Cut to 7 Inches |
| 8 |
35-8348084 |
STRAINER |
| 9 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 10 |
32-85833939 |
HOSE, (17.00 Inches Bulk), Cut to 4-1/2 Inches |
| 11 |
22-291112 |
FITTING |
| 12 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 13 |
32-83476463 |
TUBING, (32.00 Inches Bulk), Cut to 18-1/2 Inches |
| 14 |
22-881866 |
FITTING |
| 15 |
32-85978571 |
TUBING, (52.00 Inches Bulk), Cut to 15 Inches |
| 16 |
22-8M0207782 |
FITTING |
| 17 |
71-8M0157742 |
SENSOR KIT, (0-50 PSI), TAN |
| 18 |
54-883066 |
CLIP, (.865) |
| 19 |
22-875207 |
TEE, Fitting |
| 20 |
32-85978571 |
TUBING, (52.00 Inches Bulk), Cut to 44 Inches |
| 21 |
22-8M0214971 |
COUPLER |
| 22 |
22-859732 |
PLUG |
| 23 |
22-8M0214970 |
FITTING, Adapter |
| 24 |
32-85978571 |
TUBING, (52.00 Inches Bulk), Cut to 5 Inches |
| 25 |
32-8M0022492 |
HOSE, Water - Molded - Starboard |
| 26 |
32-8M0022447 |
HOSE, Water - Molded - Port |
| 27 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 28 |
22-687271 |
FITTING, (.250-18) 90 Degree - Brass |
| 29 |
22-883089 |
FITTING |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 150 Pro XS (2.5L) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
-
Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
-
Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.