🔎 Mercury 15 SEAPRO (4-STROKE) Reference Library — Exploded parts diagrams (21 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 15 SEAPRO (4-STROKE) is a 4-Stroke, Inline 2-Cylinder, EFI, SOHC outboard motor. A popular choice for small fishing boats, inflatable RIBs, and sailboat auxiliaries.
Quick Reference Specifications
| Specification |
Value |
| Engine Type |
4-Stroke, Inline 2-Cylinder, EFI, SOHC |
| Horsepower |
15 HP |
| Displacement |
333 cc |
| Bore x Stroke |
61 mm x 57 mm |
| Spark Plug (Type & Gap) |
NGK DCPR6E |
| Engine Oil Capacity |
1.0 L (1 quart) |
| Recommended Engine Oil |
SAE 25W-40 Synthetic Blend Mercury FC-W |
| Gear Case Oil Capacity |
200 mL (6.8 fl oz) |
| Idle Speed (in gear) |
850 ± 50 RPM (in gear) |
| Full Throttle RPM Range |
5000-6000 |
| Fuel |
Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 15 SEAPRO (4-STROKE):
-
Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
-
Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
-
Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
-
Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
-
Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 15 SEAPRO (4-STROKE).
▶Accessories (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
50-853805A05 |
STARTER MOTOR KIT, Electric |
▶Bottom Cowl (22 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
2189-853778008 |
BOTTOM COWL |
| 2 |
23-8537437 |
MOUNT, Rubber |
| 3 |
23-853715007 |
SPACER |
| 4 |
10-16830 |
BOLT |
| 5 |
12-161404 |
WASHER |
| 6 |
13-16221 |
WAVE WASHER |
| 7 |
16222003 |
HOOK, Cover |
| 8 |
10-8230427 |
BOLT |
| 9 |
12-953921 |
WASHER |
| 10 |
25-16226 |
GROMMET |
| 11 |
817015003 |
LATCH, Cowl |
| 12 |
26-16219 |
SEAL |
| 13 |
23-163365 |
BUSHING |
| 14 |
NSS |
NOT SOLD SEPARATE, Decal Storage |
| 15 |
25-851850010 |
GROMMET |
| 16 |
22-898101961 |
NIPPLE |
| 17 |
22-8M0182334 |
CONNECTOR, Fuel - Brass |
| 18 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 19 |
32-851848014 |
TUBING, (350 mm) |
| 20 |
54-95395 |
CLIP, Stainless Steel |
| 21 |
25-803513008 |
GROMMET |
| 22 |
25-853709008 |
GROMMET |
▶Camshaft and Oil Pump (20 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-835427A05 |
GASKET SET, Powerhead |
| 1 |
834956003 |
CAMSHAFT |
| 2 |
17-95218015 |
PIN, Camshaft |
| 3 |
834967005 |
PUMP, Oil |
| 4 |
25-857096001 |
O-RING |
| 5 |
25-857093001 |
O-RING |
| 6 |
25-857094001 |
O-RING |
| 7 |
25-857094002 |
O-RING |
| 8 |
10-850879001 |
BOLT |
| 9 |
28-95229 |
KEY |
| 10 |
26-825455001 |
SEAL, Oil |
| 11 |
12-895118003 |
WASHER |
| 12 |
43-834973002 |
DRIVEN PULLEY |
| 13 |
10-16705 |
BOLT |
| 14 |
12-895118 |
WASHER |
| 15 |
57-895120002 |
TIMING BELT |
| 16 |
11-855679003 |
NUT |
| 17 |
13-823032002 |
LOCKWASHER |
| 18 |
895119002 |
PLATE |
| 19 |
43-834955003 |
DRIVE PULLEY |
▶Carburetor (30 parts)
| Ref |
OEM Part # |
Part Name |
| - |
3303-895110A08 |
CARBURETOR |
| 1 |
802690008 |
FLOAT BOWL |
| 2 |
27-802699004 |
GASKET |
| 3 |
853830003 |
PLUNGER, Complete |
| 4 |
24-895116001 |
SPRING |
| 5 |
10-895136001 |
SCREW |
| 6 |
10-162601 |
SCREW |
| 7 |
10-803509015 |
SCREW, Drain |
| 8 |
27-8M0094878 |
GASKET |
| 9 |
16253004 |
FLOAT |
| 10 |
17-16256004 |
FLOAT, Arm Pin |
| 11 |
10-16196001 |
SCREW |
| 12 |
895115001 |
BOOT, Rubber |
| 13 |
853746003 |
ROD, Link |
| 14 |
802700006 |
NOZZLE, Main |
| 15 |
802701007 |
JET, (Main #105) |
| 16 |
803689005 |
JET, Slow |
| 17 |
16252 |
CAP |
| 18 |
898101063 |
VALVE, Float |
| 19 |
853721 |
PIN, Valve |
| 20 |
54-16255 |
CLIP |
| 21 |
10-16263 |
SCREW |
| 22 |
24-16264002 |
SPRING |
| 23 |
10-895140004 |
SCREW |
| 24 |
855540003 |
COVER, Carburetor |
| 25 |
27-855541004 |
GASKET |
| 26 |
10-855542 |
SCREW |
| 27 |
854254005 |
ENRICHENER, With O-Ring |
| 28 |
854255001 |
PLATE |
| 29 |
10-855542 |
SCREW |
▶Clamp Bracket (42 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0059728 |
CLAMP BRACKET, Starboard |
| 2 |
8M0059734 |
CLAMP BRACKET, Port |
| 3 |
898101191 |
TILT TUBE |
| 4 |
11-853722029 |
NUT |
| 5 |
23-8537435 |
BUSHING |
| 6 |
11-85372214 |
CAP NUT |
| 7 |
898101938 |
DISTANCE PIECE |
| 8 |
12-16826 |
WASHER, Stainless Steel |
| 9 |
12-16826 |
WASHER, Stainless Steel |
| 10 |
11-400212 |
NUT |
| 11 |
16198004 |
THRUST ROD |
| 12 |
24-815093003 |
SPRING |
| 13 |
10-16200A1 |
THUMB SCREW ASSEMBLY |
| 14 |
12-95379 |
PAD |
| 15 |
37-823701003 |
DECAL, Co-Pilot |
| 16 |
97-823913Q |
ANODE |
| 17 |
10-167051 |
BOLT, (M6 x 20) |
| 18 |
17-803784002 |
SHAFT, Reverse Lock |
| 19 |
53-160572 |
E RING |
| 20 |
10-879194310 |
BOLT |
| 21 |
12-16192 |
WASHER |
| 22 |
11-879194337 |
NUT |
| 23 |
8M0051399 |
BUTTON |
| 24 |
8M0183798 |
GRIP |
| 25 |
803789 |
LEVER, Reverse Lock |
| 26 |
10-803790 |
BOLT |
| 27 |
13-17641 |
WAVE WASHER |
| 28 |
12-953921 |
WASHER |
| 29 |
803783001 |
ARM, Reverse Lock |
| 30 |
24-803788 |
SPRING |
| 31 |
24-8037461 |
SPRING |
| 32 |
803782 |
LOCK, Reverse |
| 33 |
17-8037841 |
ROD, Reverse Lock |
| 34 |
18-8150261 |
COTTER PIN |
| 35 |
898103103 |
STOP, Tilt |
| 36 |
10-850879003 |
BOLT |
| 37 |
8M0157137 |
SET PLATE |
| 38 |
17-170331 |
PIN, Spring |
| 39 |
23-163364 |
BUSHING |
| 40 |
853774 |
STOP |
| 41 |
24-953832 |
SPRING |
| 42 |
803787 |
LINK, Reverse Lock |
▶Crankshaft, Pistons and Connecting Rods (15 parts)
| Ref |
OEM Part # |
Part Name |
| - |
895274A05 |
POWERHEAD ASSEMBLY |
| 1 |
400-834957A03 |
CRANKSHAFT |
| 2 |
31-834960012 |
BEARING Comment: (Brown) |
| 3 |
26-855681004 |
SEAL, Oil |
| 4 |
26-855681005 |
SEAL, Oil |
| 5 |
28-825666001 |
KEY |
| 6 |
28-825666001 |
KEY |
| 7 |
600-834961003 |
ROD, Connecting |
| 8 |
10-8035092 |
BOLT |
| 9 |
41-898103113 |
PIN, Piston |
| 10 |
53-160573 |
E RING |
| 11 |
700-834963006 |
PISTON Comment: (0.5 mm Oversize) |
| 12 |
39-8035181 |
RING, Piston - Top Comment: (0.5 mm Oversize) |
| 13 |
39-8035191 |
RING, Piston - Second Comment: (0.5 mm Oversize) |
| 14 |
26-8035201 |
RING, Oil Comment: (0.5 mm Oversize) |
▶Cylinder Block (41 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-850836A05 |
GASKET SET, Powerhead |
| 1 |
878-815013A08 |
CYLINDER BLOCK |
| 2 |
17-16119 |
PIN, Dowel |
| 3 |
10-855677005 |
BOLT |
| 4 |
10-166985 |
BOLT |
| 5 |
12-809931044 |
WASHER |
| 6 |
22-822644001 |
NIPPLE |
| 7 |
10-855677004 |
BOLT |
| 8 |
803666005 |
COVER, Exaust |
| 9 |
27-803663016 |
GASKET |
| 10 |
10-825009026 |
BOLT |
| 11 |
32-851848003 |
HOSE, (330 mm), To Tell Tale |
| 12 |
10-16832 |
BOLT, (M6 x 16) |
| 13 |
97-823912 |
ANODE |
| 14 |
27-895150001 |
GASKET |
| 15 |
97-895151001 |
PLUG, Anode |
| 16 |
10-167051 |
BOLT |
| 17 |
35-8M0162831 |
FILTER ASSEMBLY, Oil |
| 18 |
54-816311T |
TIE STRAP, (8.00 Inches) |
| 19 |
32-8M0057117 |
HOSE |
| 20 |
35-895152003 |
STRAINER, Oil |
| 21 |
10-898103228 |
BOLT |
| 22 |
853756002 |
PLATE |
| 23 |
27-851834001 |
GASKET |
| 24 |
898101142 |
PLUNGER |
| 25 |
834954004 |
COVER , Plunger |
| 26 |
32-851848025 |
TUBE |
| 27 |
54-95224 |
CLIP |
| 28 |
803512002 |
DIPSTICK |
| 29 |
803511001 |
CAP |
| 30 |
27-803508020 |
GASKET |
| 31 |
10-895136003 |
SCREW |
| 32 |
54-803563005 |
CLAMP |
| 33 |
855550003 |
LIFTING EYE |
| 34 |
10-16830009 |
BOLT |
| 35 |
54-8M0130961 |
CLAMP |
| 36 |
10-16223 |
BOLT, (M6 x 14) |
| 37 |
8M0119207 |
THERMOSTAT, 60 Degrees |
| 38 |
8537052 |
CAP |
| 39 |
27-8M0214960 |
GASKET |
| 40 |
10-8M0102279 |
BOLT, Stainless Steel |
▶Cylinder Head (14 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-850836A05 |
GASKET SET, Powerhead |
| 1 |
900-835430A05 |
CYLINDER HEAD ASSEMBLY |
| 2 |
27-850836003 |
GASKET |
| 3 |
17-16119 |
PIN, Dowel |
| 4 |
10-855677002 |
BOLT |
| 5 |
10-823042054 |
BOLT |
| 6 |
10-823042055 |
BOLT |
| 7 |
12-809931044 |
WASHER |
| 8 |
834954003 |
COVER |
| 9 |
27-803508019 |
GASKET, Rubber |
| 10 |
10-16830A1 |
SCREW KIT |
| 11 |
36-8M0135589 |
CAP ASSEMBLY, Oil Filler |
| 12 |
25-803513007 |
O-RING |
| 13 |
33-8M0204682 |
SPARK PLUG, NGK#DCPR6E |
▶Driveshaft Housing (24 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-850836A05 |
GASKET SET, Powerhead |
| 1 |
1599-803725003 |
HOUSING, Driveshaft Comment: (Long) |
| 2 |
852432004 |
SEAL, Rubber |
| 3 |
17-16119 |
PIN, Dowel |
| 4 |
26-8036675 |
SEAL, Oil |
| 5 |
853771006 |
RUBBER MOUNT |
| 6 |
853772004 |
LOCK PLATE |
| 7 |
10-879194273 |
BOLT |
| 8 |
19-803593 |
PLUG |
| 9 |
27-854617002 |
GASKET |
| 10 |
853577002 |
COVER, Idle Port |
| 11 |
10-810755013 |
BOLT |
| 12 |
25-851850009 |
GROMMET |
| 13 |
8M0111615 |
BOLT |
| 14 |
12-895146 |
WASHER |
| 15 |
25-804899003 |
GROMMET |
| 16 |
26-16168003 |
SEAL, Rubber |
| 17 |
32-803755009 |
TUBE, Water Comment: (Long) |
| 18 |
803758001 |
GUIDE, Rubber |
| 19 |
852432003 |
SEAL, Rubber |
| 20 |
850862001 |
COVER, Port |
| 21 |
850863001 |
COVER, Starboard |
| 22 |
10-16257005 |
SCREW |
| 23 |
11-400212 |
NUT, (M6) Stainless Steel |
▶Electrical Components (34 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
262-803577003 |
FLYWHEEL |
| 2 |
11-851832001 |
NUT, Gold |
| 3 |
12-853991002 |
WASHER |
| 4 |
16058004 |
STATOR |
| 5 |
10-853536002 |
SCREW |
| 6 |
12-895106003 |
WASHER |
| 7 |
54-953951 |
CLAMP |
| 8 |
10-162452 |
SCREW |
| 9 |
895267001 |
BRACKET |
| 10 |
10-855544016 |
SCREW |
| 11 |
17-16119 |
PIN, Dowel |
| 12 |
835395004 |
COIL, Pulser |
| 13 |
10-878388001 |
SCREW |
| 14 |
835401004 |
CD UNIT |
| 15 |
10-16705 |
BOLT |
| 16 |
12-953921 |
WASHER |
| 17 |
54-17169001 |
CLAMP |
| 18 |
853739004 |
BRACKET |
| 19 |
23-8M0021168 |
COLLAR, (9.3 mm) |
| 20 |
25-851815005 |
GROMMET |
| 21 |
12-953921 |
WASHER |
| 22 |
10-8M0204707 |
SCREW, (M6 x 25) |
| 23 |
12-953924 |
WASHER, (Rubber) |
| 24 |
84-895121A04 |
CD HARNEST |
| 25 |
19-853994 |
TERMINAL PLUG |
| 26 |
339-803559A04 |
COIL ASSEMBLY, Ignition |
| 27 |
85-803560001 |
BOOT |
| 28 |
10-823042 |
BOLT |
| 29 |
804057001 |
PILOT LAMP |
| 30 |
54-813275 |
CLAMP |
| 31 |
87-8M0163139 |
SWITCH |
| 32 |
84-803539001 |
WIRE, Lead |
| 33 |
84-895122A01 |
CABLE |
| 34 |
19-853994 |
TERMINAL PLUG |
▶Fuel Tank Assembly(Plastic - 3.2 Gallon) (6 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
1260-859061A1 |
TANK ASSEMBLY, Fuel (Plastic-3.2 Gallon) |
| 2 |
823535 |
GAUGE/CAP ASSEMBLY |
| 3 |
27-8169771 |
GASKET, Fuel Cap |
| 4 |
22-8M0175544 |
CONNECTOR KIT, Fuel |
| 5 |
25-823533 |
O-RING |
| 6 |
35-823534 |
SCREEN |
▶Gear Housing, Driveshaft (44 parts)
| Ref |
OEM Part # |
Part Name |
| - |
853792A09 |
REPAIR KIT, Gear Housing Water Pump - Chrome |
| 1 |
1668-803729A3 |
GEAR HOUSING ASSEMBLY |
| 2 |
31-160521 |
BEARING, Needle |
| 3 |
22-8M0229353 |
PLUG |
| 4 |
27-95220 |
GASKET |
| 5 |
97-803731 |
ANODE |
| 6 |
10-16832 |
BOLT |
| 7 |
16133 |
STRAINER, Water |
| 8 |
10-16134 |
SCREW |
| 9 |
22-8M0229353 |
PLUG |
| 10 |
27-95220 |
GASKET |
| 11 |
803730002 |
STRAINER, Water |
| 12 |
10-17635 |
SCREW |
| 13 |
16-879194301 |
STUD |
| 14 |
803762 |
CLAMP |
| 15 |
10-898103153 |
SCREW |
| 16 |
8M0172382 |
CAM |
| 17 |
17-16179 |
PIN |
| 18 |
803760009 |
CAM ROD Comment: Long |
| 19 |
23-803761 |
BUSHING |
| 20 |
25-8537096 |
O-RING |
| 21 |
25-161772 |
O-RING |
| 22 |
12-8M0135942 |
WASHER |
| 23 |
11-400213 |
NUT, (M8) Stainless Steel |
| 24 |
11-85372211 |
NUT |
| 25 |
11-85372216 |
NUT |
| 26 |
46-803750A05 |
HOUSING, Water Pump |
| 27 |
26-8036674 |
SEAL |
| 28 |
10-823042046 |
BOLT |
| 29 |
803751 |
LINER, Water Pump |
| 30 |
47-8M0214944 |
IMPELLER |
| 31 |
803753 |
GUIDE PLATE |
| 32 |
46-803750A04 |
HOUSING, Water Pump |
| 33 |
25-8537096 |
O-RING |
| 34 |
26-803752 |
SEAL, Oil |
| 35 |
15-813276005 |
SHIM, (0.5) |
| 36 |
30-16132T05 |
BEARING, Ball |
| 37 |
45-803738008 |
DRIVESHAFT Comment: Long |
| 38 |
28-8M0173418 |
KEY |
| 39 |
43-16138003 |
GEAR, Pinion |
| 40 |
851859 |
CONNECTOR |
| 41 |
17-952189 |
PIN, Dowel |
| 42 |
25-853709007 |
GROMMET |
| 43 |
803766005 |
SHIFT ROD |
▶Gear Housing, Propshaft (24 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-8M0082884 |
GASKET SET, Lower Unit |
| 1 |
1668-803729A3 |
GEAR HOUSING ASSEMBLY |
| 2 |
30-16132T01 |
BEARING, Ball |
| 3 |
43-812944003 |
GEAR, Forward |
| 4 |
803747 |
PUSH ROD |
| 5 |
853764003 |
HOLDER |
| 6 |
24-803746 |
SPRING |
| 7 |
52-803745 |
CLUTCH |
| 8 |
17-160851 |
PIN |
| 9 |
24-176672 |
SPRING |
| 10 |
44-8M0088568 |
PROPELLER SHAFT |
| 11 |
8M0070877 |
CARRIER ASSEMBLY, Bearing |
| 12 |
25-8M0087846 |
O-RING |
| 13 |
30-16132T01 |
BEARING, Ball |
| 14 |
31-803734 |
BEARING, Needle |
| 15 |
26-161622 |
SEAL, Oil |
| 16 |
10-823042 |
BOLT, Stainless Steel |
| 17 |
12-803742 |
WASHER |
| 18 |
43-812945004 |
GEAR, Reverse |
| 19 |
8M0143215 |
THRUST HOLDER |
| 20 |
48-897752A11 |
PROPELLER, (10 Pitch) Comment: (10) (Standard Short) |
| 21 |
12-161402 |
WASHER |
| 22 |
11-161471 |
PROP NUT |
| 23 |
18-8150264 |
COTTER PIN |
▶Intake Manifold and Fuel Pump (23 parts)
| Ref |
OEM Part # |
Part Name |
| - |
27-835427A05 |
GASKET SET, Powerhead |
| 1 |
804887002 |
MANIFOLD, Inlet |
| 2 |
27-853525003 |
GASKET |
| 3 |
17-16119 |
PIN, Dowel |
| 4 |
10-16125 |
BOLT |
| 5 |
12-16826 |
WASHER, Stainless Steel |
| 6 |
54-953951 |
CLAMP |
| 7 |
27-16327002 |
GASKET, Carburetor |
| 8 |
853526004 |
INSULATOR |
| 9 |
853728003 |
SILENCER, Air |
| 10 |
54-95395 |
CLIP, Stainless Steel |
| 11 |
25-825057005 |
O-RING |
| 12 |
10-855809001 |
BOLT |
| 13 |
12-16826 |
WASHER, Stainless Steel |
| 14 |
32-851848012 |
TUBING |
| 15 |
54-952245 |
CLAMP |
| 16 |
803529T04 |
PUMP, Fuel |
| 17 |
853731004 |
DIAPHRAGM SET |
| 18 |
25-16109003 |
O-RING |
| 19 |
10-823042 |
BOLT |
| 20 |
32-851848013 |
TUBING, (320 mm) |
| 21 |
32-851848006 |
HOSE, (150 mm) |
| 22 |
35-8M0157133 |
FILTER, Fuel |
▶Intake Valve and Exhaust Valve (18 parts)
| Ref |
OEM Part # |
Part Name |
| - |
895274A05 |
POWERHEAD ASSEMBLY |
| 1 |
850838T02 |
VALVE, Intake |
| 2 |
850839003 |
VALVE, Exhaust |
| 3 |
26-822647001 |
SEAL, Intake - Black |
| 4 |
26-822647002 |
SEAL, Exhaust - Green |
| 5 |
24-898101214 |
SPRING |
| 6 |
8M0158660 |
SEAT |
| 7 |
803555 |
RETAINER |
| 8 |
28-803556 |
COTTER |
| 9 |
850841004 |
ROCKER ARM |
| 10 |
10-825046002 |
SCREW |
| 11 |
11-826150001 |
NUT, Adjusting |
| 12 |
850842001 |
ROCKER ARM SHAFT |
| 13 |
825451001 |
COLLAR |
| 14 |
24-825452002 |
SPRING |
| 15 |
24-825453001 |
SPRING |
| 16 |
12-895118001 |
WASHER |
| 17 |
12-895118004 |
WASHER |
▶Recoil Starter (30 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
8M0170582 |
STARTER ASSEMBLY, Recoil |
| 2 |
803716005 |
HOUSING, Starter |
| 3 |
804029 |
HANDLE, Starter |
| 4 |
853755002 |
CAP, Starter Handle |
| 5 |
24-804024008 |
SPRING, Starter |
| 6 |
53-852784001 |
E RING |
| 7 |
803717002 |
REEL |
| 8 |
50-8M0110715 |
ROPE, Starter |
| 9 |
812635T03 |
RATCHET |
| 10 |
898101148 |
RATCHET GUIDE |
| 11 |
24-812634004 |
SPRING, Return |
| 12 |
812638002 |
PLATE, Friction |
| 13 |
24-8M0126988 |
SPRING, Friction |
| 14 |
10-8M0126987 |
BOLT |
| 15 |
804031002 |
LOCK, Starter |
| 16 |
24-812645008 |
SPRING |
| 17 |
824995005 |
SEAL, Rubber |
| 18 |
10-16830 |
BOLT |
| 19 |
23-8035731 |
COLLAR |
| 20 |
12-953921 |
WASHER |
| 21 |
54-8M0130961 |
CLAMP |
| 22 |
11-856949002 |
NUT |
| 23 |
25-881305006 |
GROMMET, Rubber |
| 24 |
23-895162001 |
COLLAR, Steel |
| 25 |
24-812645009 |
SPRING |
| 26 |
895133T01 |
COVER, Belt |
| 27 |
10-16830 |
BOLT |
| 28 |
10-16705 |
BOLT |
| 29 |
12-953921 |
WASHER |
| 30 |
23-952868 |
COLLAR |
▶Service/Support Material (1 parts)
| Ref |
OEM Part # |
Part Name |
| - |
90-895256005 |
PARTS MANUAL, 15HP Seapro 4-Stroke International |
▶Shift Components (30 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
895174002 |
COVER |
| 2 |
10-879194334 |
SCREW |
| 3 |
37-802987001 |
DECAL, F, N, R |
| 4 |
853739005 |
BRACKET |
| 5 |
10-823042 |
BOLT |
| 6 |
25-16823002 |
GROMMET |
| 7 |
895176001 |
BRACKET, Shift Lever |
| 8 |
10-167051 |
BOLT, (M6 x 20) |
| 9 |
804892003 |
DRUM, Throttle |
| 10 |
16333 |
ROD, Snap |
| 11 |
803574003 |
ROD, Throttle |
| 12 |
10-16705 |
BOLT |
| 13 |
12-953921 |
WASHER |
| 14 |
23-952868 |
COLLAR |
| 15 |
803763004 |
LEVER, Shift |
| 16 |
23-895126001 |
COLLAR |
| 17 |
10-8M0147119 |
BOLT |
| 18 |
892774001 |
ROD, Shift Lever |
| 19 |
851862002 |
SHIFT ARM |
| 20 |
851865002 |
SHIFT SHAFT |
| 21 |
24-8M0138736 |
STOPPER |
| 22 |
8M0138737 |
CLAMP |
| 23 |
10-82304223 |
BOLT |
| 24 |
803548001 |
PLATE |
| 25 |
10-8248324 |
BOLT |
| 26 |
895131A03 |
CABLE, Starter |
| 27 |
853817002 |
BRACKET |
| 28 |
87-823037A2 |
SWITCH ASSEMBLY, Stop - Lanyard |
| 29 |
823054 |
LANYARD |
| 30 |
853986001 |
SEAL |
▶Swivel Bracket (30 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
3407-813029016 |
SWIVEL BRACKET |
| 2 |
23-16336008 |
BUSHING |
| 3 |
803774003 |
THRUST PLATE |
| 4 |
25-16109003 |
O-RING |
| 5 |
22-824969 |
FITTING, Grease |
| 6 |
10-895140002 |
BOLT |
| 7 |
8M0145395 |
DISC |
| 8 |
895172001 |
PLATE, Co-Pilot |
| 9 |
10-8248324 |
BOLT |
| 10 |
12-895146002 |
WASHER |
| 11 |
12-895146001 |
WASHER |
| 12 |
895171001 |
HANDLE, Co-Pilot |
| 13 |
11-95374001 |
NUT, Nylon |
| 14 |
84-898101089 |
GROUND WIRE |
| 15 |
10-8230427 |
BOLT, To Standard Clamp Bracket |
| 16 |
10-85554410 |
SCREW |
| 17 |
8M0102284 |
BRACKET, Starboard |
| 18 |
10-879194310 |
BOLT |
| 19 |
10-879194309 |
BOLT |
| 20 |
803775006 |
MOUNT, Lower |
| 21 |
8M0102285 |
BRACKET, Port |
| 22 |
10-167051 |
BOLT, (M6 x 20) |
| 23 |
97-823913Q |
ANODE |
| 24 |
12-8M0135942 |
WASHER |
| 25 |
11-400213 |
NUT, (M8) Stainless Steel |
| 26 |
10-879194260 |
BOLT |
| 27 |
853770004 |
SWIVEL TUBE |
| 28 |
16-895166001 |
STUD BOLT |
| 29 |
12-879194340 |
WASHER, Stainless Steel |
| 30 |
11-85372212 |
NUT, Nylon |
▶Tiller Handle (25 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
803996002 |
Handle, Steering |
| 2 |
23-823939001 |
BUSHING |
| 3 |
12-822145001 |
WASHER |
| 4 |
13-826792001 |
WAVE WASHER, |
| 5 |
826648001 |
PLATE, Handle |
| 6 |
16-815028 |
STUD BOLT |
| 7 |
13-400256 |
LOCKWASHER, (M6) |
| 8 |
11-400212 |
NUT, (M6) Stainless Steel |
| 9 |
804898001 |
WIRE, Throttle |
| 10 |
804019002 |
BRACKET, Steering |
| 11 |
10-895140003 |
BOLT |
| 12 |
12-168261 |
WASHER |
| 13 |
17-16085 |
PIN |
| 14 |
16338 |
BRACKET |
| 15 |
10-879194329 |
SCREW |
| 16 |
813026 |
FRICTION PIECE |
| 17 |
10-16087 |
SCREW, Adjusting |
| 18 |
12-16826 |
WASHER, Stainless Steel |
| 19 |
11-400212 |
NUT, (M6) Stainless Steel |
| 20 |
803998002 |
SHAFT, Throttle |
| 21 |
853775003 |
GRIP |
| 22 |
10-16094 |
SCREW |
| 23 |
37-824200005 |
DECAL, Throttle |
| 24 |
23-16191 |
SPACER |
| 25 |
23-16336 |
BUSHING |
▶Upper Cowl (11 parts)
| Ref |
OEM Part # |
Part Name |
| - |
37-895762A05 |
DECAL SET |
| 1 |
114-803580A13 |
TOP COWL ASSEMBLY |
| 2 |
16218010 |
TILT HANDLE |
| 3 |
895178002 |
SEAL, Rubber |
| 4 |
853788002 |
ROLLER |
| 5 |
12-953921 |
WASHER |
| 6 |
53-953181 |
E RING |
| 7 |
12-953921 |
WASHER |
| 8 |
13-400256 |
LOCKWASHER, (M6) |
| 9 |
11-400212 |
NUT, (M6) Stainless Steel |
| 10 |
NSS |
NOT SOLD SEPARATE, Decal-Oil Pressure |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 15 SEAPRO (4-STROKE) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
-
Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
-
Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.