🔎 Honda BF2 Reference Library — Exploded parts diagrams (21 diagrams), specifications, common issues, and maintenance checklist.
The Honda BF2 is a 4-Stroke OHV Single-Cylinder, Air-Cooled outboard motor. Designed for dinghies, inflatable boats, and small tenders where lightweight portability is essential.
Quick Reference Specifications
| Specification |
Value |
| Engine Type |
4-Stroke OHV Single-Cylinder, Air-Cooled |
| Horsepower |
2 HP |
| Displacement |
57 cc (3.5 cu in) |
| Bore x Stroke |
45 x 36 mm (1.77 x 1.42 in) |
| Spark Plug (Type & Gap) |
NGK CR4HSB |
| Engine Oil Capacity |
0.25 L (0.26 US qt) |
| Recommended Engine Oil |
SAE 10W-30 4-Stroke Motor Oil (API SG or higher) |
| Gear Case Oil Capacity |
0.05 L (1.7 fl oz) |
| Idle Speed (in gear) |
1300 ± 100 RPM |
| Full Throttle RPM Range |
5000-6000 RPM |
| Fuel |
Unleaded Gasoline, 86 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Honda BF2:
-
Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
-
Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
-
Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
-
Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
-
Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Honda BF2.
▶AIR GUIDE (11 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
15721-ZVA-000 |
TUBE, BREATHER |
| 2 |
16202-ZVA-000 |
GASKET, AIR GUIDE |
| 3 |
17201-ZVA-000 |
GUIDE, AIR INLET |
| 4 |
17202-ZVA-300 |
COLLAR, DISTANCE |
| 5 |
17204-ZVA-300 |
COLLAR, DISTANCE (14MM) |
| 6 |
17371-ZVA-000 |
CASE, MUFFLER |
| 7 |
17374-ZVA-000 |
GROMMET, MUFFLER |
| 8 |
17375-ZVA-000 |
SEAL, MUFFLER |
| 9 |
90002-ZVA-000 |
BOLT, FLANGE (5X62) |
| 10 |
90005-ZVA-000 |
BOLT, FLANGE (5X70) |
| 11 |
90049-ZVA-000 |
BOLT, FLANGE (5X12) |
▶CAMSHAFT (18 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
12209-ZM7-003 |
SEAL, VALVE STEM |
| 2 |
14111-ZVA-000 |
CAMSHAFT |
| 3 |
14126-Z0G-003 |
ROLLER (5X29.8) |
| 4 |
14410-ZVA-000 |
ROD, PUSH |
| 5 |
14431-ZVA-000 |
ARM, VALVE ROCKER |
| 6 |
14435-ZM7-003 |
ROLLER (4X37.8) |
| 7 |
14451-ZM7-000 |
PIVOT, ROCKER ARM |
| 8 |
14711-ZW6-000 |
VALVE, IN. |
| 9 |
14721-ZW6-000 |
VALVE, EX. |
| 10 |
14731-ZM7-013 |
LIFTER, VALVE |
| 11 |
14751-ZM7-000 |
SPRING, VALVE |
| 12 |
14754-ZVA-000 |
COLLAR, LIFTER |
| 13 |
14771-ZDF-000 |
RETAINER, VALVE SPRING |
| 14 |
15361-ZN4-000 |
SLINGER, OIL |
| 15 |
90206-ZVA-000 |
NUT, TAPPET ADJUSTING |
| 16 |
90401-ZVA-000 |
WASHER (6MM) |
| 17 |
91151-VB5-800 |
ROLLER (6X25) |
| 18 |
93404-05016-08 |
BOLT-WASHER (5X16) |
▶CARBURETOR (26 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
16010-ZW6-611 |
GASKET SET |
| 2 |
16011-ZE0-005 |
VALVE SET, FLOAT (SEAT NOT INCLUDED) |
| 3 |
16013-ZDJ-801 |
FLOAT SET (CARBURETOR NO.) |
| 4 |
16015-ZW6-G02 |
CHAMBER SET, FLOAT (CARBURETOR NO.) |
| 5 |
16016-ZW6-E11 |
SCREW SET (CARBURETOR NO.) |
| 6 |
16024-ZW6-013 |
SCREW SET, DRAIN (CARBURETOR NO.) |
| 7 |
16028-ZW6-003 |
SCREW SET |
| 8 |
16028-ZW6-611 |
SCREW SET |
| 9 |
16044-ZV0-A01 |
LEVER SET, CHOKE |
| 10 |
16081-ZV1-A00 |
SCREW, PAN |
| 12 |
16100-ZVA-E03 |
CARBURETOR ASSY. (BF33V C) |
| 13 |
16166-ZW6-G01 |
NOZZLE, MAIN |
| 14 |
16196-ZVA-000 |
TUBE A, AIR VENT |
| 15 |
16197-ZVA-000 |
TUBE B, AIR VENT |
| 16 |
16211-ZVA-000 |
INSULATOR, CARBURETOR |
| 17 |
16212-ZVA-000 |
GASKET, INSULATOR |
| 18 |
16221-ZVA-000 |
GASKET, CARBURETOR |
| 19 |
16225-ZVA-000 |
PLATE, CARBURETOR JOINT |
| 20 |
16674-ZVA-000 |
ROD, CHOKE |
| 21 |
16953-ZW6-003 |
LEVER, PETCOCK |
| 23 |
16956-ZE1-811 |
SPRING, PETCOCK LEVER |
| 24 |
16957-ZE1-812 |
GASKET, PETCOCK |
| 25 |
16958-ZVA-000 |
JOINT, AIR VENT TUBE |
| 26 |
90012-ZVA-000 |
SCREW, FLAT (5X20) |
| 27 |
99101-ZG0-0650 |
JET, MAIN (#65) (CARBURETOR NO.) |
| 28 |
99204-ZE2-0350 |
JET SET, PILOT (#35) (CARBURETOR NO.) |
▶CLUTCH (9 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
22000-ZVA-003 |
CLUTCH ASSY. |
| 2 |
22100-ZVA-000 |
CLUTCH OUTER ASSY. |
| 3 |
22214-ZVA-000 |
STAY, CLUTCH |
| 4 |
22252-ZVA-003 |
SPRING, CLUTCH SHOE |
| 5 |
22253-ZVA-000 |
BOLT, CLUTCH (8MM) |
| 6 |
22254-ZVA-000 |
WASHER, PLAIN (8MM) |
| 7 |
22255-ZVA-000 |
BOLT, CLUTCH STAY (8MM) |
| 8 |
22260-ZVA-000 |
HOUSING ASSY., CLUTCH |
| 9 |
91251-ZW6-013 |
SEAL, WATER (11X21X8) |
▶CRANKCASE SIDE COVER (7 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
11340-ZVA-000 |
COVER, CRANKCASE SIDE |
| 2 |
16512-ZVA-000 |
HOLDER, GOVERNOR WEIGHT |
| 3 |
90174-ZW4-000 |
BOLT, FLANGE (5X23) (CT200) |
| 4 |
90441-ZVA-000 |
WASHER (4.2X13) |
| 5 |
90603-ZVA-000 |
CLIP, GOVERNOR HOLDER |
| 6 |
91202-HC5-005 |
OIL SEAL (17X27X5) (KOYO) |
| 7 |
94301-06100 |
PIN, DOWEL (6X10) |
▶CRANKSHAFT (2 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
13310-ZVA-010 |
CRANKSHAFT |
| 2 |
13331-ZVA-000 |
KEY, SPECIAL |
▶CYLINDER (21 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
12100-ZW6-T00 |
CYLINDER |
| 2 |
12311-ZVA-010 |
COVER, HEAD |
| 3 |
12367-ZE6-020 |
FILTER, BREATHER |
| 4 |
15171-ZN4-000 |
PIPE, BREATHER |
| 5 |
15571-ZM7-003 |
VALVE, OIL OUTLET |
| 6 |
15572-ZM7-000 |
PLATE, STOPPER |
| 7 |
15600-ZG4-003 |
CAP ASSY., OIL FILLER |
| 8 |
15622-ZVA-000 |
EXTENSION, OIL LEVEL FINDER |
| 9 |
15625-Z1T-000 |
GASKET, OIL FILLER CAP |
| 10 |
15661-ZV0-003 |
FINDER, OIL LEVEL |
| 11 |
19631-ZVA-000 |
SHROUD |
| 12 |
31914-Z8Y-003 |
SPARK PLUG (LR4C-E) (NGK) |
| 13 |
90003-ZVA-000 |
BOLT, FLANGE (5X16) |
| 14 |
90008-ZM7-000 |
BOLT (4X10) |
| 15 |
90009-ZVA-000 |
BOLT, FLANGE (5X12) (SUS) |
| 16 |
90006-ZVA-000 |
BOLT, OIL DRAIN |
| 17 |
90019-ZV1-010 |
BOLT, FLANGE (5X10) |
| 18 |
91301-ZE9-003 |
O-RING (22.1X2.2) |
| 19 |
91325-P4V-003 |
O-RING (6.9X1.5) |
| 20 |
93500-03005-0A |
SCREW, PAN (3X5) |
| 21 |
96220-60150 |
ROLLER (6X15) |
▶ENGINE COVER (16 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
17514-ZVA-000 |
RUBBER, TANK MOUNTING (C) |
| 2 |
17936-ZVA-000 |
WASHER, PLAIN (6MM) |
| 3 |
17951-ZVA-000 |
KNOB, CHOKE |
| 4 |
35180-ZW6-023 |
SWITCH ASSY., EMERGENCY STOP |
| 5 |
36182-ZV4-651 |
WIRE, EMERGENCY |
| 6 |
40100-ZVA-000 |
CASE, ENGINE (LOWER) |
| 7 |
58131-ZV0-000 |
PIN, SHEAR |
| 8 |
63100-ZVA-010ZA |
COVER, ENGINE *NHB14M* (AQUA MARINE SILVER METALLIC) |
| 9 |
63103-ZVA-010 |
BELT, ENGINE COVER |
| 10 |
88111-ZVA-000 |
HOLDER, PARTS |
| 11 |
90019-ZW4-000 |
BOLT, FLANGE (5X10) (CT200) |
| 12 |
90103-ZVA-000 |
BOLT, FLANGE (6X60) |
| 13 |
90303-ZVA-000 |
NUT, HEX. (16MM) |
| 14 |
91551-ZVA-000 |
COLLAR (6X4) |
| 15 |
91552-ZVA-000 |
COLLAR, ENGINE CASE (LOWER) |
| 16 |
94201-30402 |
PIN, SPLIT (3.0) |
▶EXHAUST PIPE (3 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
18330-ZVA-000 |
PIPE, EX. |
| 2 |
18515-ZVA-000 |
GUIDE, AIR EX. |
| 3 |
90007-ZVA-000 |
BOLT, FLANGE (5X16) (SUS) |
▶EXTENSION CASE (24 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
19250-ZVA-610 |
TUBE, WATER |
| 2 |
40201-ZW6-C00ZA |
CASE, EXTENSION *NH246* (LOOSY GRAY) |
| 3 |
40202-ZW6-C00ZA |
SEPARATOR, EXTENSION *NH246* (LOOSY GRAY) |
| 4 |
40210-ZVA-610 |
BUSH, VERTICAL SHAFT (L) |
| 5 |
40218-ZVA-000 |
PROTECTOR, EXTENSION |
| 7 |
50201-ZW6-C00ZA |
CASE, SWIVEL *NH246* (LOOSY GRAY) |
| 8 |
50203-ZVA-000ZA |
CAP, SWIVEL CASE *NH246* (LOOSY GRAY) |
| 9 |
50204-ZVA-000 |
COLLAR, SWIVEL CASE |
| 10 |
50211-ZVA-000 |
LINER, SWIVEL CASE |
| 11 |
50212-ZVA-000 |
BLOCK, FRICTION |
| 12 |
50233-ZVA-000 |
SPRING, FRICTION ADJUSTING |
| 13 |
50337-ZVA-000 |
COLLAR, DISTANCE |
| 14 |
50511-ZVA-000 |
ARM, TILT LOCK |
| 15 |
50516-ZVA-000 |
SPRING, TILT LOCK |
| 16 |
90104-ZVA-000 |
BOLT-WASHER, SOCKET (6X30) |
| 17 |
90106-ZVA-000 |
BOLT, SWIVEL CASE |
| 18 |
90109-ZVA-000 |
BOLT-WASHER (6X35) |
| 20 |
90114-ZVA-000 |
BOLT, FLANGE (8X35) |
| 21 |
90518-ZVA-000 |
WASHER, PLAIN (8MM) |
| 22 |
90752-ZVA-000 |
PIN, SPRING (2.5X20) |
| 23 |
90951-ZV7-010 |
NIPPLE, GREASE |
| 24 |
92101-05016-4J |
BOLT, HEX. (5X16) |
| 25 |
94301-08100 |
PIN, DOWEL (8X10) |
| 26 |
94301-08140 |
PIN, DOWEL (8X14) |
▶FAN COVER (7 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
16576-ZVA-000 |
HOLDER, CABLE |
| 2 |
19610-ZVA-010 |
COVER, FAN |
| 3 |
19618-ZVA-000 |
GROMMET, FAN COVER |
| 4 |
19619-ZVA-300 |
COLLAR, FAN COVER |
| 5 |
90042-ZM7-000 |
BOLT A, STUD |
| 6 |
90043-ZM7-000 |
BOLT B, STUD |
| 7 |
90058-ZVA-000 |
BOLT, FLANGE (5X10) |
▶FLYWHEEL (6 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
28451-ZVA-003 |
PULLEY, STARTER |
| 2 |
30500-ZVA-013 |
COIL ASSY., IGNITION |
| 3 |
31110-ZVA-003 |
FLYWHEEL |
| 4 |
32195-ZVA-003 |
WIRE, STOP SWITCH |
| 5 |
90004-ZW4-000 |
BOLT, FLANGE (5X20) (CT200) |
| 6 |
90203-ZVA-000 |
NUT, FLANGE (10MM) |
▶FUEL TANK (10 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
16952-ZE6-000 |
FILTER, FUEL |
| 2 |
17511-ZW6-E10 |
TANK, FUEL |
| 3 |
17515-ZVA-E10 |
RUBBER, TANK CAP |
| 4 |
17531-ZVA-000 |
GROMMET, FUEL TANK |
| 5 |
17620-ZW6-E12 |
CAP ASSY., FUEL TANK |
| 6 |
17701-ZVA-E01 |
TUBE, FUEL |
| 7 |
90403-ZVA-000 |
WASHER, PLAIN (6MM) |
| 8 |
90601-ZY3-030 |
CLAMP, TUBE (D10.5) |
| 9 |
90607-ZY6-000 |
CLAMP, TUBE (8.0) |
| 10 |
94021-06020 |
NUT, CAP (6MM) |
▶GEAR CASE/PROPELLER (23 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
40205-ZVA-000ZA |
PLATE, CAVITATION *NH246* (LOOSY GRAY) |
| 3 |
41005-ZVA-610ZA |
CASE ASSY., GEAR *NH246* (L) (LOOSY GRAY) |
| 4 |
41100-ZVA-000ZA |
CASE, GEAR *NH246* (LOOSY GRAY) |
| 5 |
41106-ZVA-000 |
METAL, ANODE |
| 6 |
41112-ZW6-C10 |
SHAFT, VERTICAL (L) |
| 7 |
41131-ZVA-000 |
GEAR, PINION |
| 8 |
41135-ZVA-000 |
WASHER, PINION THRUST |
| 9 |
41160-ZVA-000 |
SHAFT, PROPELLER |
| 10 |
41200-ZW6-C10ZA |
HOLDER ASSY., PROPELLER SHAFT *NH246* (LOOSY GRAY) |
| 11 |
41281-ZVA-000 |
GASKET, PROPELLER SHAFT HOLDER |
| 12 |
58130-ZV0-841ZB |
PROPELLER, THREE-BLADE *NH283* (STIN GRAY) |
| 13 |
58131-ZV0-000 |
PIN, SHEAR |
| 14 |
90105-ZVA-000 |
BOLT, OIL CHECK |
| 15 |
90109-ZVA-000 |
BOLT-WASHER (6X35) |
| 16 |
90201-HW1-671 |
BOLT, FLANGE (6X12) |
| 17 |
90113-ZVA-000 |
BOLT, FLANGE (6X16) |
| 18 |
90507-ZVA-000 |
WASHER, NYLON (8MM) |
| 19 |
90531-ZVA-000 |
WASHER, GEAR |
| 20 |
91251-ZV0-003 |
SEAL, WATER (11X21X8) |
| 21 |
91253-ZV0-003 |
SEAL, WATER (11X21X8) |
| 22 |
94201-30402 |
PIN, SPLIT (3.0) |
| 23 |
94301-08140 |
PIN, DOWEL (8X14) |
| 24 |
94540-06018 |
E-RING (6MM) |
▶HANDLEBAR (25 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
16576-ZVA-000 |
HOLDER, CABLE |
| 2 |
17910-ZVA-003 |
CABLE A, THROTTLE |
| 3 |
17920-ZVA-000 |
CABLE B, THROTTLE |
| 4 |
17921-ZVA-000 |
HOLDER, CABLE |
| 5 |
17930-ZVA-000 |
ARM, THROTTLE |
| 6 |
17932-ZVA-000 |
SPRING, THROTTLE ARM |
| 7 |
53101-ZW6-C00ZA |
HANDLEBAR *NH246* (LOOSY GRAY) |
| 8 |
53104-ZVA-000 |
BOLT, FRICTION |
| 9 |
53106-ZVA-000 |
BLOCK, THROTTLE FRICTION |
| 10 |
53107-ZVA-000 |
COLLAR, HANDLE MOUNTING |
| 11 |
53108-ZVA-010 |
RUBBER, HANDLE MOUNTING |
| 12 |
53140-ZVA-000 |
GRIP, THROTTLE |
| 13 |
53167-ZVA-000 |
HOUSING, THROTTLE (LOWER) |
| 14 |
53168-ZVA-000 |
HOUSING, THROTTLE (UPPER) |
| 15 |
90101-ZVA-000 |
BOLT, HEX. (6X24) |
| 16 |
90102-ZVA-000 |
BOLT, SPECIAL (8X42) |
| 17 |
90117-ZVA-000 |
BOLT, FLANGE (6X12) |
| 18 |
90302-ZVA-000 |
NUT, HEX. (6MM) |
| 19 |
90501-ZVA-000 |
WASHER, PLAIN (8MM) |
| 20 |
90509-ZVA-000 |
WASHER (32MM) |
| 21 |
90511-ZVA-000 |
WASHER, PLAIN (6MM) |
| 22 |
91553-ZVA-010 |
COLLAR (6.2X8.5X5) |
| 23 |
90108-ZVA-010 |
SCREW-WASHER (5X22) |
| 24 |
94001-05490-0S |
NUT, HEX. (5MM) |
| 25 |
94001-06490-0S |
NUT, HEX. (6MM) |
▶LABEL (8 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
87121-ZW6-G81 |
MARK, RR. (2.3) |
| 2 |
87124-ZVA-000 |
MARK, EMERGENCY SWITCH INDICATION |
| 3 |
87132-ZVA-000 |
MARK, SIDE STRIPE (HONDA) |
| 5 |
87521-ZVA-000 |
MARK, FUEL PETCOCK |
| 6 |
87533-ZVA-A00 |
MARK, THROTTLE (ENGLISH) |
| 8 |
87537-ZVA-000 |
LABEL, RECOIL CAUTION |
| 9 |
87538-ZW6-E40 |
LABEL, OPERATOR CAUTION |
| 10 |
87539-ZW6-740 |
MARK, EX. CAUTION (E) |
▶OIL CASE (6 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
11300-ZVA-405 |
CASE ASSY., OIL |
| 2 |
11316-ZVA-000 |
PLATE, TUBE SETTING |
| 3 |
15723-ZVA-000 |
TUBE, CLUTCH HOUSING BREATHER |
| 4 |
90019-ZV1-010 |
BOLT, FLANGE (5X10) |
| 5 |
90174-ZW4-000 |
BOLT, FLANGE (5X23) (CT200) |
| 6 |
91202-HC5-005 |
OIL SEAL (17X27X5) (KOYO) |
▶PISTON/CONNECTING ROD (6 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
13010-ZW6-000 |
RING SET, PISTON (STD) |
| 2 |
13101-ZDH-000 |
PISTON (STD) |
| 3 |
13111-ZVA-000 |
PIN, PISTON |
| 4 |
13115-ZVA-000 |
CLIP, PISTON PIN (10MM) |
| 5 |
13200-ZN4-010 |
ROD ASSY., CONNECTING |
| 6 |
90001-ZM7-000 |
BOLT, CONNECTING ROD |
▶RECOIL STARTER (5 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
28400-ZVA-013 |
STARTER ASSY., RECOIL |
| 2 |
28461-ZVA-003 |
KNOB, STARTER |
| 3 |
28462-ZW6-003 |
ROPE, RECOIL STARTER |
| 4 |
90202-ZVA-000 |
NUT, FLANGE CAP (5MM) |
| 5 |
28475-ZVA-003 |
GUIDE, ROPE |
▶STERN BRACKET (11 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
50300-ZVA-000ZA |
BRACKET, STERN *NH246* (LOOSY GRAY) |
| 2 |
50302-ZVA-000 |
RECEIVER, THRUST |
| 3 |
50303-ZVA-000 |
RUBBER, THRUST |
| 4 |
90107-ZVA-010 |
BOLT, HEX. (8X114) |
| 5 |
90108-ZV0-000 |
BOLT, DIAMOND (6X110) |
| 6 |
90301-ZVA-000 |
WINGNUT |
| 7 |
90501-ZVA-000 |
WASHER, PLAIN (8MM) |
| 8 |
90512-ZVA-000 |
WASHER, PLAIN (6MM) |
| 9 |
90751-ZW6-000 |
PIN, SPRING (2.5X8) |
| 10 |
94001-08490-0S |
NUT, HEX. (8MM) |
| 11 |
91452-ZVD-000 |
RING, STOPPER |
▶TOOL (7 parts)
| Ref |
OEM Part # |
Part Name |
| 1 |
28462-ZVA-A00 |
ROPE, STARTER |
| 2 |
36187-ZV4-652 |
CLIP, EMERGENCY LOCK |
| 4 |
89203-ZVA-000 |
SPANNER (8X10) |
| 5 |
89213-KWK-900 |
PLIERS |
| 6 |
89216-ZVA-000 |
WRENCH, BOX (P16) |
| 7 |
99008-01600 |
BAG, TOOL (160MM) |
| 8 |
89217-ZVA-000 |
WRENCH, BOX (10MM) |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Honda BF2 running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
-
Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
-
Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
