17400-87831 Part for Suzuki DF100B | JLM Marine

Oil Filter – Fits Suzuki DF100B (2018+)

This high-quality oil filter is engineered specifically for the Suzuki DF100B outboard engines manufactured from 2018 onwards. Designed to maintain optimal engine lubrication and protection, this filter meets stringent performance standards to keep your Suzuki engine running smoothly.

This part directly replaces OEM part number 17400-87831, ensuring seamless fitment and reliable performance for your maintenance needs.

• Direct fit for Suzuki DF100B (2018+) models
• Ensures efficient oil filtration and engine protection
• Straightforward installation during routine maintenance

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

Your package includes:

• 17416-99E10 (Seal) × 1
• 17471-87L01 (Plate) × 1
• 09420-04009 (key) × 1
• 17413-99E11 (Cup) × 1
• 17472-87L00 (Gasket) × 1
• 17461-87E12 (Impeller) × 1
• 15412-92J00 (Fuel filter) × 1 View Part →
• 55321-87J00 (Zinc Anode) × 3
• 09280-22019 (O-ring) × 3
• 16510-61A31 (Oil filter) × 1 View Part →
• 09168-12012 (Drain Gasket) × 1 View Part →
• 09168-10034 (Drain Gasket) × 2
• 09204-03003 (Cotter Pin) × 1
• 24OP149 (Gear Oil Pump) × 1

Installation Guide

1. Ensure the engine is off and cool before beginning work.
2. Locate the oil filter on your Suzuki DF100B outboard engine.
3. Place a drain pan beneath the filter to catch any residual oil.
4. Using an oil filter wrench, turn the old filter counterclockwise to remove it.
5. Clean the filter mounting surface on the engine block thoroughly.
6. Apply a thin layer of fresh engine oil to the rubber gasket on the new filter.
7. Thread the new oil filter onto the mount by hand, turning clockwise.
8. Tighten the filter until the gasket contacts the mounting surface, then turn an additional 3/4 turn.
9. Refill the engine with the appropriate grade and amount of oil as specified in your owner's manual.
10. Start the engine and let it run for a few minutes, checking for leaks around the filter.
11. Turn off the engine, wait a few minutes, and recheck the oil level; top off if necessary.
12. Dispose of the old filter and oil properly at a recycling center.

Troubleshooting & FAQ

Q: How do I confirm this oil filter fits my Suzuki engine?
A: Verify your engine is a DF100B manufactured in 2018 or later. Cross-check the OEM part number 17400-87831 with your engine's service manual or parts diagram to ensure correct fitment.

Q: How often should I replace my oil filter?
A: Suzuki recommends replacing the oil filter at every oil change, typically every 100 hours of operation or annually, whichever comes first. Always consult your owner's manual for specific service intervals.

Q: What are the signs that my oil filter needs replacement?
A: Common indicators include decreased oil pressure, contaminated or dark oil shortly after a change, unusual engine noises, or the service interval has been reached. Replace the filter immediately if any of these symptoms occur.

Q: Can I reuse the oil filter if it looks clean?
A: No, oil filters are single-use components. Reusing a filter can lead to poor filtration, increased engine wear, and potential damage due to trapped contaminants breaking down the filter media.

Q: Is this an OEM or aftermarket oil filter?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.