Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
OEM and aftermarket replacement parts for Mercury 1150. Scroll down for exploded parts diagrams (21), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 1150 Reference Library — Exploded parts diagrams (21 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 1150 is a 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve outboard motor. Powers center-console boats, larger pontoons, and offshore-capable fishing craft.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve |
| Horsepower | 115 HP |
| Displacement | 2100 cc (2.1L) |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK SILZKR7B11 |
| Engine Oil Capacity | 5.0 L (5.28 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | 24 fl oz (710 mL) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 1150:
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 1150.
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-3919 | COWL, BOTTOM Comment: SERIAL 02928721-09999999 |
| 2 | 52862A2 | DRIP TRAY ASSEMBLY, BOTTOM COWL |
| 3 | 37940 | PAD, SOUND - DRIP TRAY |
| 4 | 10-35519 | SCREW, DRIP TRAY TO BOTTOM COWL (1/2") |
| 5 | 32-8M0108355 | HOSE, DRIP TRAY TO BOTTOM COWL (8") |
| 6 | 39616 | BOOT, CONTROL CABLES - BOTTOM COWL Comment: SERIAL 02928721-09999999 |
| 7 | 76369 | SPACER, BOTTOM COWL (COWL FRONT COVER) |
| 8 | 10-48591 | SCREW, SPACER TO BOTTOM COWL (1/2") |
| 9 | 37637 | BOOT, FUEL CONNECTOR - BOTTOM COWL |
| 10 | 23760 | BAFFLE, BOTTOM COWL Comment: SERIAL 00000000-03114543 |
| 11 | 10-52867 | SCREW, BAFFLE TO BOTTOM COWL Comment: SERIAL 00000000-03114543 |
| 12 | 37445 | SUPPORT, WIRING HARNESS - BOTTOM COWL |
| 13 | 10-88488 | SCREW, WIRING HARNESS SUPPORT TO BOTTOM COWL (3 1/4") |
| 14 | 11-8M0207775 | NUT, WIRING HARNESS SUPPORT SCREW |
| 15 | 32-8M0108355 | HOSE, TELL TALE - EXHAUST COVER TO BOTTOM COWL (16") |
| 16 | 52889 | NOZZLE, TELL TALE HOSE TO BOTTOM COWL |
| 17 | 10-35519 | SCREW, TELL TALE NOZZLE TO BOTTOM COWL (1/2") |
| 18 | 22-996642 | ELBOW, TELL TALE HOSE TO EXHAUST COVER |
| 19 | 54-48123 | CLAP, TELL TALE HOSE TO CONNECTOR AND ELBOW |
| 20 | 27-56028 | GAKSET, POWERHEAD TO EXHAUST EXTENSION PLATE |
| 21 | 56306A2 | PLATE ASSEMBLY, EXHAUST EXTENSION |
| 22 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 23 | 38448 | RETAINER, WATER TUBE SEAL |
| 24 | 10-69069 | SCREW, RETAINER TO EXHAUST EXTENSION PLATE (3/4") |
| 25 | 10-24226 | SCREW, EXHUAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 26 | 11-8M0207775 | NUT, EXHAUST EXTENSION PLATE SCREW |
| 27 | 58478A1 | DIVIDER ASSEMBLY, EXHAUST (SEE NOTE BELOW) |
| 28 | 27-48801 | GASKET, EXHAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 29 | 37918 | SEAL, EXHAUST EXTENSION PLATE |
| 30 | 99358 | STRIP, RETAINING - EXHAUST EXTENSION PLATE SEAL |
| 31 | 10-37571 | SCREW, SEAL AND RETAINING STRIP TO EXTENSION PLATE (1/2") |
| 32 | 60304A54 | SHIFT SHAFT ASSEMBLY, UPPER (LONG SHAFT) |
| 33 | 23-26600 | BUSHING, SHIFT SHAFT |
| 34 | 93960A1 | COUPLING, SHIFT SHAFT |
| 35 | 73402 | LINK ROD ASSEMBLY |
| 36 | 12-24664 | WASHER, LINK ROD |
| 37 | 13-29720 | WASHER, WAVE - LINK ROD |
| 38 | 52732A6 | BRACKET ASSEMBLY, ANCHOR CONTROL CABLES Comment: SERIAL 00000000-02928720 |
| 39 | 49935 | CAP, BRASS BARREL TO THROTTLE CABLE Comment: SERIAL 00000000-02928720 |
| 40 | 49932A1 | LEVER ASSEMBLY, CONTROL CABLE LOCKING - ANCHOR BRACKET Comment: SERIAL 00000000-02928720 |
| 41 | 24-37911 | SPRING, CONTROL CABLE LOCKING LEVER Comment: SERIAL 00000000-02928720 |
| 42 | 17-239281 | PIN, ROLL - CONTROL CABLE LOCKING LEVER Comment: SERIAL 00000000-02928720 |
| 43 | 24-38472 | SPRING, CONTROL CABLE TENSION - ANCHOR BRACKET Comment: SERIAL 00000000-02928720 |
| 44 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES SERIAL #2928721 AND UP Comment: SERIAL 02928721-09999999 |
| 45 | 39519 | CAP, BARREL RETAINER - ANCHOR BRACKET Comment: SERIAL 02928721-09999999 |
| 46 | 87609A1 | LEVER NYLON - SHIFT CABLE LOCKING Comment: SERIAL 02928721-09999999 |
| 47 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING Comment: SERIAL 02928721-09999999 |
| 48 | 39667 | COVER, NYLON - SHIFT CABLE Comment: SERIAL 02928721-09999999 |
| 49 | 39536 | LINK, LOCKING LEVER TO COVER Comment: SERIAL 02928721-09999999 |
| 50 | 10-35386 | SCREW, ANCHOR BRACKET TO CYLINDER BLOCK (1") |
| 51 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 52 | 37896 | GUIDE BLOCK, LINK ROD |
| 53 | 52100 | WEAR PLATE, LINK ROD |
| 54 | 8M0036768 | LATCH, CONTROL CABLE FASTENING - ANCHOR BRACKET |
| 55 | 12-69056 | WASHER, PLAIN - LINK ROD |
| 56 | 11-826709109 | NUT, LINK ROD |
| 57 | 46933A1 | GROUND STRAP ASSEMBLY, CRANKCASE TO COWL (3 5/8") |
| 58 | 46933A2 | GROUND STRAP ASSEMBLY, HOUSING TO COWL (3 3/8") |
| 59 | 10-62568 | SCREW, GROUND STRAP FASTENING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 1395-51091 | REPAIR PARTS KIT (1 PER CARBURETOR) Comment: SERIAL 00000000-03023086 |
| 1 | 1352-4509A1 | CARBURETOR ASSEMBLY, COMPLETE (WMK-3) - Comment: SERIAL 02928768-09999999 |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 6 | 1395-83181 | INLET NEEDLE, SEAT AND GASKET Comment: SERIAL 00302308-09999999 |
| 9 | 1399-4559 | COVER, FLOAT BOWL Comment: SERIAL 03023086-09999999 |
| 10 | 10-52195 | SCREW, FLOAT BOWL COVER (SHORT) |
| 11 | 10-52196 | SCREW, FLOAT BOWL COVER (LONG) |
| 12 | 13-26995 | LOCKWASHER, FLOAT BOWL COVER SCREW |
| 13 | 27-25851 | GASKET, STRAINER COVER (LARGE) |
| 14 | 1399-3938 | SCREEN, FILTER |
| 15 | 27-25849 | GASKET, STRAINER COVER (SMALL) |
| 16 | 1399-4791A1 | COVER, STRAINER |
| 18 | 10-25822 | SCREW, STAINER COVER FASTENING |
| 19 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 20 | 8146791 | LEVER, THROTTLE STOP (SEE NOTE BELOW) |
| 21 | 1395-7942 | SHAFT, THROTTLE |
| 23 | 1395-4540 | SCREW, BODY (IDLE TUBE) Comment: SERIAL 03023086-09999999 |
| 26 | 1399-4412 | SHUTTER, THROTTLE Comment: SERIAL 02928768-09999999 |
| 28 | 1399-3515 | SCREW, IDLE ADJUSTMENT |
| 29 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL Comment: SERIAL 03023086-09999999 |
| 31 | 1399-4217 | JET, MAIN FUEL (.062) |
| 33 | 1395-4542 | SCREW, PLUG - MAIN NOZLE Comment: SERIAL 03023086-09999999 |
| 36 | 1395-4543 | SCREW, BODY CHANNEL Comment: SERIAL 03023086-09999999 |
| 37 | 27-481641 | GAKSET, CARBURETOR FLANGE |
| 38 | 11-29250 | NUT, CARBURETOR MOUNTING STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 54293A10 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 3 | 11-68219 | NUT, SOLENOID TERMINAL |
| 4 | 10-25299 | SCREW, CHOKE SOLENOID (3/4") |
| 5 | 13-8M0204647 | LOCKWASHER, CHOKE SOLENOID SCREW |
| 6 | 90548A1 | PLUNGER AND LINK ASSEMBLY, CHOKE SOLENOID |
| 7 | 52518 | CLUSTER, THROTTLE LEVER (UPPER CARBURETOR) |
| 8 | 1395-6027 | SCREW, CLUSTER TO THROTTLE LEVER |
| 9 | 1352-4509A1 | CARBURETOR ASSEMBLY, COMPLETE (WMK-3) Comment: SERIAL 03023086-09999999 |
| 10 | 53720A2 | THROTTLE PICK-UP BRACKET ASSEMBLY |
| 11 | 10-53651 | SCREW, THROTTLE BRACKET MOUNTING |
| 12 | 28-89694 | INSERT, THROTTLE COUPLING |
| 13 | 59757 | BRACKET, COIL LEAD RETAINER |
| 14 | 10-64278 | SCREW, COIL BRACKET (1") |
| 15 | 12-8M0204649 | WASHER, COIL BRACKET SCREW |
| 16 | 11-8M0207775 | NUT, COIL BRACKET SCREW |
| 17 | 90242A1 | KNOB, CHOKE ROD |
| 18 | 25-20116 | GROMMET, CHOKE ROD |
| 19 | 49589 | STRAP, CHOKE KNOB TO CHOKE ROD |
| 20 | 10-48591 | SCREW, STRAP TO CHOKE KNOB (1/2") |
| 21 | 13-26996 | LOCKWASHER, STRAP SCREW |
| 22 | 48203 | ROD, CHOKE |
| 23 | 10-48591 | SCREW, STRAP TO CHOKE ROD (1/2") |
| 24 | 11-46438 | NUT, STRAP TO CHOKE ROD SCREW |
| 25 | 48152 | SHUTTER, CHOKE - CARBURETOR |
| 26 | 16-69037 | STUD, CARBURETOR - CHOKE SHUTTER PIVOT |
| 27 | 11-20110 | NUT, CHOKE SHUTTER TO CARBURETOR STUD |
| 28 | 35-57819 | SCREEN ASSEMBLY, FILTER - CARBURETOR |
| 29 | 10-23015 | SCREW, UPPER CARBURETOR FILTER SCREEN TO CARBURETOR (1") |
| 30 | 24-57818 | SPRING, UPPER FILTER SCREEN SCREW |
| 31 | 11-20110 | NUT, CARBURETOR FILTER SCREEN FASTENING SREW |
| 32 | 24-48230 | SPRING, CHOKE ROD TENSION |
| 33 | 10-657461 | STUD, CHOKE ROD SPRING TO CARBURETOR |
| 34 | 23-32427 | SPACER, CHOKE ROD SPRING STUD |
| 35 | 11-8M0207775 | NUT, CHOKE ROD SPRING TO CARBURETOR STUD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 11-8M0207775 | NUT, LOWER SHOCK PIN SCREW LONG SHAFT |
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 28403A3 | THUMB SCREW ASSEMBLY |
| 3 | 12-28404 | WASHER, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLMAP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKET Comment: (NOT USED WITH FULL POWER TRIM) |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 14 | 1482-6386A4 | SWIVEL BRACKET ASSEMBLY (LONG SHAFT) |
| 15 | 26-37448 | OIL SEAL, SWIVEL BRACKET |
| 16 | 10-47828 | SCREW, DRIVE - SWIVEL BRACKET |
| 17 | 22-69059 | FITTING, GREASE - SWIVEL BRACKET |
| 18 | 19-77633Q | LUBRICAP, SWIVEL BRACKET GREASE FITTING |
| 19 | 76386 | TILT LOCK ASSEMBLY, STARBOARD |
| 20 | 76385T | TILT LOCK ASSEMBLY, PORT |
| 21 | 47802 | TUBE, TILT LOCK |
| 22 | 18-47959 | COTTER PIN, TILT LOCK TUBE |
| 23 | 23-47803 | BUSHING, TILT LOCK TUBE |
| 24 | 13-69150 | WASHER, WAVE - TILT LOCK TUBE |
| 25 | 24-94891 | SPRING, COIL - SWIVEL BRACKET Comment: (NOT USED WITH FULL POWER TRIM) |
| 26 | 17-38311 | PIN, COIL SPRING MOUNTING Comment: (NOT USED WITH FULL POWER TRIM) |
| 27 | 17-49840A1 | SWIVEL PIN AND STEERING ARM ASSEMBLY (LONG SHAFT) |
| 28 | 28203 | BUMPER, STEERING ARM |
| 29 | 10-49554 | BOLT, STEERING ARM TO UPPER MOUNT (5 7/8") |
| 30 | 11-8M0204653 | NUT, STEERING ARM BOLT FASTENING |
| 31 | 10-31830 | SCREW, RIDE-GUIDE ATTACHING |
| 32 | 11-8M0204726 | NUT, RIDE-GUIDE ATTACHING SCREW |
| 33 | 12-37429 | WASHER, SWIVEL PIN - LOWER |
| 34 | 73984T | YOKE, BOTTOM |
| 35 | 11-37424 | NUT, SWIVEL PIN RETAINING |
| 36 | 28205T | STRAP STOP, DRIVE SHAFT HOUSING TO SWIVEL BRACKET |
| 37 | 10-28200 | SCREW, STRAP STOP TO DRIVE SHAFT HOUSING (2 7/8") |
| 38 | 11-25269 | NUT, STRAP STOP FASTENING SCREW |
| 39 | 23-28688 | SPACER, RUBBER - COIL SPRING POSITIONING |
| 40 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 41 | 63473 | TUBE, CUSHION - SHOCK PIN |
| 42 | 10-68299 | BOLT, CLAMP BRACKET TO BOAT TRANSOM (UPPER) |
| 43 | 12-68300 | WASHER, CLAMP BRACKET BOLT (UPPER) |
| 44 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 45 | 38-56267 | SERIAL PLATE |
| 46 | 10-25612 | SCREW, DRIVE - SERIAL PLATE TO SWIVEL BRACKET |
| 47 | 17-25598 | PIN, REVERSE LOCK SPRING ATTACHING Comment: (NOT USED WITH FULL POWER TRIM) |
| 48 | 24-29821 | SPRING, REVERSE LOCK TENSION Comment: (NOT USED WITH FULL POWER TRIM) |
| 49 | 87431 | REVERSE LOCK ASSEMBLY Comment: (NOT USED WITH FULL POWER TRIM) |
| 50 | 56349 | SHAFT, REVERSE LOCK PIVOT Comment: (NOT USED WITH FULL POWER TRIM) |
| 51 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT Comment: (NOT USED WITH FULL POWER TRIM) |
| 52 | 55-28414 | PIN, LOWER SHOCK MOUNTING LONG SHAFT |
| 53 | 23-28199 | SPACER, UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 54 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 55 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) Comment: (NOT USED WITH FULL POWER TRIM) |
| 56 | 55-58780A7 | SHOCK ABSORBER Comment: (NOT USED WITH FULL POWER TRIM) |
| 57 | 23-32171 | BUSHING, RUBBER - SHOCK ABSORBER (UPPER) Comment: (NOT USED WITH FULL POWER TRIM) |
| 58 | 23-28198 | BUSHING, RUBBER - SHOCK ABSORBER (LOWER) Comment: (NOT USED WITH FULL POWER TRIM) |
| 59 | 12-8M0204648 | WASHER, UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 60 | 10-69375A1 | SCREW, UPPER AND LOWER SHOCK MOUNTING PIN Comment: (NOT USED WITH FULL POWER TRIM) |
| 61 | 70679 | COVER, UPPER AND LOWER SHOCK MOUNTING PIN |
| 62 | 10-37655 | SCREW, COVER TO SHOCK MOUNTING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 92-271091 | ADHESIVE COMPOUND, EMBLEM FASTENING |
| 1 | 2183-7928A3 | COWL FRONT COVER ASSEMBLY Comment: SERIAL 03270480-09999999 |
| 2 | 37-64413 | EMBLEM< FRONT COVER Comment: SERIAL 00000000-03114543 |
| 3 | 56849 | KNOB, COWL FRONT COVER FASTENING |
| 4 | 12-30771 | WASHER, COVER FASTENING KNOB (RUBBER) |
| 5 | 12-59572 | WASHER, COVER FASTENING KNOB (PLASTIC) |
| 6 | 24-30772 | SPRING, TENSION - FASTENING KNOB |
| 7 | 17-29077 | ROLL PIN, TENSION SPRING TO KNOB |
| 8 | 31089 | STRIP, SOUND ABSORBING |
| 9 | 38675 | BLANKET, SOUND ABSORBING |
| 10 | 35769 | SEAL, SOUND ABSORBING - UPPER |
| 11 | 53334 | SEAL, SOUND ABSORBING - TOP |
| 12 | 2136-4660A4 | WRAP AROUNG COWL ASSEMBLY Comment: SERIAL 03270480-09999999 |
| 13 | 46785A1 | COWL LATCH ASSEMBLY |
| 14 | 30413 | HOOK, COWL LATCH FASTENING |
| 15 | 30021 | BLANKET, SOUND ABSORBING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 436-9072A1 | CRANKSHAFT ASSEMBLY |
| 2 | 11-52901 | NUT, FLYWHEEL TO CRANKSHAFT |
| 3 | 30-62567T | BEARING, BALL - UPPER |
| 4 | 30-63742T | BEARING, BALL - LOWER |
| 5 | 54196A6 | CARRIER ASSEMBLY, "O" RING Comment: SERIAL 02933580-09999999 |
| 6 | 25-35126 | "O" RING, CARRIER Comment: SERIAL 02933580-09999999 |
| 7 | 535-3190A2 | CENTER MAIN BEARING ASSEMBLY |
| 8 | 17-20032 | DOWEL PIN, CENTER MAIN BEARING |
| 9 | 29-714221 | BEARING, NEEDLE - OUTER RACE |
| 10 | 26113T | RACE, OUTER (PAIR) |
| 11 | 53-26933 | RING, SNAP - OUTER RACE |
| 12 | 17-47246 | DOWEL PIN, STEPPED |
| 13 | 10-22968 | SCREW, CENTER MAIN BEARING CLAMPING |
| 14 | 11-8M0207775 | NUT, BEARING CLAMPING SCREW |
| 15 | 540-5266A9 | MAIN BEARING ASSEMBLY, VALVE TYPE Comment: SERIAL 03274150-09999999 |
| 16 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 17 | 10-45775 | SCREW, MAIN BEARING CLAMPING |
| 18 | 11-45774 | NUT, MAIN BEARING CLAMPING SCREW |
| 19 | 34-56007A1 | REED SET, MATCHED - MAIN BEARING |
| 20 | 34-57422 | REED STOP, MAIN BEARING REED VALVES |
| 21 | 10-20055 | SCREW, REED STOP MOUNTING ( Comment: SERIAL 00000000-03274149 |
| 21A | 10-62204 | SCREW, REED STOP MOUNTING Comment: SERIAL 03274150-09999999 |
| 22 | 11-53153 | NUT, REED STOP MOUNTING SCREW Comment: SERIAL 03274150-09999999 |
| 23 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY |
| 24 | 53-857196 | LOCK RING, PISTON PIN |
| 25 | 39-78816A12 | RING, PISTON (1/16" THICK) |
| 26 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 27 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 28 | 10-54803 | SCREW, CONNECTING ROD |
| 29 | 11-49091 | NUT, CONNECTING ROD SCREW |
| 30 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 31 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1134-3197A1 | END CAP ASSEMBLY, UPPER |
| 2 | 26-41953 | OIL SEAL, END CAP |
| 3 | 25-47254 | "O" RING |
| 4 | 15-47248A1 | SHIM, END CAP TO CRANKCASE (.002-3-5-10) |
| 5 | 10-30225 | SCREW, END CAP MOUNTING |
| 6 | 852-4843A5 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: SERIAL 03274149-09999999 |
| 7 | 27-53862 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 8 | 66517 | RESTRICTION, CRANKCASE BLEED |
| 9 | 16-64936 | STUD, CARBURETOR MOUNTING (1 3/16") |
| 10 | 16-64281 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (1 7/8") |
| 11 | 17-43044 | PIN, DOWEL - CRANKCASE TO CYLINDER BLOCK |
| 12 | 17-20323 | PIN, DOWEL - CYLINDER BLOCK TO MAIN BEARING |
| 13 | 16-26134 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (4 1/16") |
| 14 | 16-48770 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (3 9/16") |
| 15 | 16-26324 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (2 7/8") |
| 16 | 56029T | COVER, STARTER MOTOR BRACKET - TOP |
| 17 | 10-21449 | SCREW, TOP COVER ATTACHING (2") |
| 18 | 11-29250 | NUT, COVER SCREW |
| 19 | 76867 | COVER, STARTER MOTOR BRACKET - BOTTOM |
| 20 | 10-73279 | SCREW, BOTTOM COVER ATTACHING (1 7/8") |
| 21 | 11-29250 | NUT, COVER SCREW |
| 22 | 10-69091 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 5/8") |
| 23 | 12-22753 | WASHER, CRANKCASE TO CYLINDER BLOCK SCREWS |
| 24 | 11-29250 | NUT, CRANKCASE FASTENING SCREWS |
| 25 | 10-20359 | SCREW, CENTER MAIN BEARING LOCKING |
| 26 | 14-20091 | TAB WASHER, BEARING LOCKING SCREW |
| 27 | 1126-3196A3 | END CAP ASSEMBLY, LOWER |
| 28 | 21-42657A3 | CHECK VALVE ASSEMBLY, END CAP |
| 29 | 26-41953 | OIL SEAL, END CAP |
| 30 | 25-20081 | "O" RING< END CAP |
| 31 | 15-20085A1 | SHIM, END CAP TO CRANKCASE (.002-3-5-10) |
| 32 | 10-30225 | SCREW, END CAP MOUNTING (1") |
| 33 | 62278 | COVER, WATER JACKET - CYLINDER BLOCK Comment: SERIAL 03270480-09999999 |
| 34 | 27-47228 | GASKET, WATER JACKET COVER |
| 35 | 10-53167T | SCREW, WATER JACKET COVER TO CYLINDER BLOCK (7/8") |
| 36 | 13-53166 | LOCKWASHER, WATER JACKET COVER FASTENING SCREW |
| 37 | 27-55283 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 38 | 62277 | PLATE, BAFFLE - EXHAUST MANIFOLD Comment: SERIAL 03270480-09999999 |
| 39 | 27-55284 | GASKET, BAFFLE PLATE TO EXHAUST MANIFOLD COVER |
| 40 | 55281T | COVER, EXHAUST MANIFOLD |
| 41 | 10-38837 | SCREW, MANIFOLD COVER MOUNTING |
| 42 | 58124A4 | SWITCH, MERCURY |
| 43 | 10-28708 | SCREW, SWITCH TO FRONT MOUNTING BRACKET (1/2") |
| 45 | 10-62568 | SCREW, MERCURY SWITCH LEAD |
| 46 | 1023-3755A1 | COVER, CYLINDER BLOCK |
| 47 | 27-981853 | GASKET, CYLINDER BLOCK COVER |
| 48 | 10-21091 | SCREW, CYLINDER BLOCK COVER MOUNTING (1 1/8") |
| 49 | 11-8M0207775 | NUT, COVER MOUNTING SCREW |
| 50 | 22-328022 | PLUG, PIPE - CYLINDER BLOCK COVER |
| 51 | 37440 | BRAACKET, MOUNT SUPPORT - CYLINDER BLOCK |
| 52 | 10-35386 | SCREW, BRACKET TO CYLINDER BLOCK (1") |
| 53 | 62978 | COVER, TRANSFER PORT - BOTTOM Comment: SERIAL 03367061-09999999 |
| 54 | 27-64941 | GASKET, TRANSFER PORT COVER Comment: SERIAL 03023086-09999999 |
| 55 | 10-28636 | SCREW, TRANSFER PORT COVER MOUNTING (3/4") |
| 56 | 54-37282 | CLAMP, CYLINDER BLEED HOSE TO TOP COVER |
| 57 | 37281 | "D" WASHER, BLEED HOSE CLAMP |
| 58 | 22-67902 | FITTING, UPPER CYLINDER BLEED |
| 59 | 54-20387 | CLAMP, BLEED HOSE TO CONNECTOR |
| 60 | 32-9912688 | HOSE, CYLINDER BLEED - UPPER (13 1/2") |
| 61 | 22-62365A1 | CHECK VALVE ASSEMBLY, BLEED HOSE |
| 62 | 21-28481A1 | CHECK VALVE ASSEMBLY |
| 63 | 22-20781 | ELBOW, BALANCE TUBE TO MAIN BEARING SCREW |
| 64 | 54-20386 | CLAMP, BALANCE TUBE TO ELBOW AND TEE |
| 65 | 32-9912688 | HOSE, CENTER CYLINDER BLEED (7 1/2") |
| 66 | 22-432881 | TEE, BLEED HOSE TO CYLINDER BLOCK - CENTER |
| 67 | 32-9912688 | HOSE, CYLINDER BLEED - LOWER (8 1/2") |
| 68 | 22-53491 | TEE, BLEED HOSE TO CYLINDER BLOCK - LOWER |
| 69 | 32-8M0108355 | TUBE, BALANCE - MAIN BEARING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR Comment: SERIAL 03023086-09999999 |
| 2 | 32197 | STOP, SPARK ADVANCE - DISTRIBUTOR HOUSING |
| 3 | 17-27962 | PIN, ANCHO SPRING - DISTRIBUTOR HOUSING |
| 4 | 24-27944 | SPRING, HORSESHOE - DISTRIBUTOR HOUSING |
| 5 | 12-53540 | WASHER, ECONOMIZER COLLAR - DISTRIBUTOR HOUSING |
| 6 | 55804A1 | ECONOMIZER COLLAR ASSEMBLY |
| 7 | 17-27961 | PIN, ECONOMIZER COLLAR - SPRING RETAINER |
| 8 | 22-25094 | FITTING, GREASE - ECONOMIZER COLLAR |
| 9 | 27947 | SWIVER, LINKAGE - ECONOMIZER COLLAR |
| 10 | 25996A1 | SWIVERL AND LINK ROD ASSEMBLY |
| 11 | 11-25168 | NUT, UPPER LINK ROD ADJUSTING |
| 12 | 37700 | ROD, LINK - UPPER |
| 13 | 27948 | SWIVEL, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 14 | 48856 | LEVER, THROTTLE CONTROL |
| 15 | 13-25806 | WASHER, WAVE - THROTTLE CONTROL LEVER SWIVEL |
| 16 | 12-8M0204649 | WASHER, THROTTLE CONTROL LEVER SWIVEL |
| 17 | 11-8267089 | NUT, UPPER LINK ROD TO THROTTLE CONTROL LEVER |
| 18 | 10-31830 | SCREW, THROTTLE LEVER TO EXHAUST COVER (1 3/4") |
| 19 | 12-8M0042641 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 20 | 23-45818 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 21 | 11-8M0204726 | NUT, THROTTLE CONTROL LEVER SCREW |
| 22 | 37587 | SWIVEL, LOWER - THROTTLE CONTROL LEVER TO THROTTLE CABLE |
| 23 | 11-8267089 | NUT, THROTTLE CABLE TO LOWER SWIVEL |
| 24 | 48692 | COLLAR, THROTTLE ACTUATOR |
| 25 | 10-48675 | SCREW, ADJUSTING - THROTTLE ACTUATOR COLLAR (1 1/2") |
| 26 | 11-20890 | NUT, THROTTLE ACTUATOR COLLAR ADJUSTING SCREW |
| 27 | 52023 | CAP, NYLON - THROTTLE ACTUATOR COLLAR ADJUSTING SCREW |
| 28 | 48671 | PLATE, THROTTLE ACTUATOR |
| 29 | 10-37892 | SCREW, THROTTLE ACTUATOR PLATE TO ECONOMIZER COLLAR (1") |
| 30 | 12-847883 | WASHER, THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 31 | 13-26996 | LOCKWASHER, THROTTLE ACTUATOR PLATE FASTENING SCREW |
| 32 | 23-48674 | SPACER, THROTTLE ACTUATOR PLATE SCREW |
| 33 | 58454 | CAM, THROTTLE ACTUATOR PLATE (SERIAL #2928768 AND UP) Comment: SERIAL 02928768-09999999 |
| 34 | 12-46246 | WASHER, ADAPTOR - DISTRIBUTOR HOUSING |
| 35 | 66165A2 | ADAPTOR ASSEMBLY, DISTRIBUTOR |
| 36 | 22-25094 | FITTING, GREASE - DISTRIBUTOR ADAPTOR |
| 37 | 10-78841 | SCREW, DISTRIBUTOR HOUSING TO CRANKCASE (1 1/2") |
| 38 | 12-20084 | WASHER, DISTRIBUTOR HOUSING SCREW |
| 39 | 11-22053 | NUT, DISTRIBUTOR HOUSING SCREW |
| 40 | 84-93388A1 | WIRE, GROUND - DISTRIBUTOR ADAPTOR TO FRONT SUPPORT BRACKET |
| 41 | 55805 | BRACKET, STOP |
| 42 | 10-28636 | SCREW, DISTRIBUTOR ADAPTOR TO STOP BRACKET (3/4") |
| 43 | 12-20533 | WASHER, STOP BRACKET FASTENING SCREW |
| 44 | 10-64022 | SCREW, STOP BRACKET ADJUSTING (2 1/8") |
| 45 | 11-20890 | NUT, STOP BRACKET ADJUSTING SCREW |
| 46 | 52023 | CAP, NYLON - STOP BRACKET ADJUSTING SCREW |
| 47 | 12-27939 | WASHER, DISTRIBUTOR HOUSING |
| 48 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING |
| 49 | 13-27959 | WASHER, WAVE - DISTRIBUTOR BALL BEARING TENSION |
| 50 | 54567 | CAP, DISTRIBUTOR HOUSING |
| 51 | 23-47250 | SPACER, DRIVER PULLEY |
| 52 | 29906A1 | DRIVEN PULLEY ASSEMBLY |
| 53 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 54 | 29907 | FLANGE, DRIVEN PULLEY |
| 55 | 28-29910 | KEY, DISTRIBUTOR DRIVER |
| 56 | 10-68554 | SCREW, PULLEY CLAMPING |
| 57 | 20140 | BELT, TIMING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 8M0084600 | CONNECTOR, SPARK PLUG LEAD |
| 1 | 30-20066 | BALL BEARING, DISTRIBUTOR HOUSING (UPPER) |
| 2 | 11-54209 | NUT, ROTOR SHAFT TO DISTRIBUTOR HOUSING |
| 3 | 23-53539 | SLEEVE, ROTOR SHAFT |
| 4 | 393-3736A79 | HOUSING ASSEMBLY, DISTRIBUTOR Comment: SERIAL 03023086-09999999 |
| 5 | 53417 | GROUND STRAP ASSEMBLY, DISTRIBUTOR TO CRANKCASE |
| 6 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
| 7 | 58807A1 | FLAME ARRESTOR, VENT - DISTRIBUTOR HOUSING Comment: SERIAL 03270480-09999999 |
| 8 | 15-55853 | SHIM, BALL BEARING TO DISTRIBUTOR HOUSING |
| 9 | 30-26379 | BALL BEARING, DISTRIBURTOR HOUSING (LOWER) |
| 10 | 15-21148A1 | SHIM, BALL BEARING TO SPACER |
| 11 | 23-53538 | SPACER, ROTOR SHAFT |
| 12 | 53-26406 | RING, RETAINER - BALL BEARING TO DISTRIBUTOR HOUSING |
| 13 | 393-4313 | DISC, ROTOR SERIAL Comment: SERIAL 02928721-09999999 |
| 14 | 393-4312 | ROTOR, DISTRIBUTOR Comment: SERIAL 02928721-09999999 |
| 15 | 54-60768 | CLAMP, DISTRIBUTOR CAP TO DISTRIBUTOR HOUSING Comment: PART OF DIST. CAP ASS'Y SERIAL 03023086-09999999 |
| 16 | 10-62802 | SCREW, DISTRIBUTOR CAP CLAMP (1 1/4") Comment: PART OF DIST. CAP ASS'Y |
| 17 | 11-26768 | NUT, DISTRIBUTOR CAP CLAMP SCREW Comment: PART OF DIST. CAP ASS'Y |
| 18 | 32-8M0108355 | HOSE, VENT - DISTRIBUTOR TO ELBOW (13 1/2") Comment: SERIAL 00000000-03114543 |
| 19 | 22-31521 | ELBOW, VENT HOSE TO BOTTOM COWL Comment: SERIAL 00000000-03114543 |
| 20 | 84-821945A5 | HIGH TENSION CABLE ASSEMBLY, DISTRIBUTOR CAP TO COIL |
| 21 | 25-26547 | GROMMET, HIGH TENSION CABLE |
| 22 | 332-2854T01 | BOOT, HIGH TENSION CABLE TO COIL |
| 23 | 85-94589 | SLEEVE, HIGH TENSION CABLE |
| 24 | 27-55896 | GASKET, DISTRIBUTOR CAP |
| 25 | 393-4841A2 | DISTRIBUTOR CAP ASSEMBLY Comment: SERIAL 03366102-09999999 |
| 26 | 58807A1 | FLAME ARRESTOR, VENT - DISTRIBUTOR CAP Comment: SERIAL 03270480-09999999 |
| 27 | 33-896329827 | SPARK PLUG (AC-V40FFM) |
| 28 | 84-813715A1 | SPARK PLUG LEAD ASSEMBLY #1, #2, #3, #4, #5 AND #6 Comment: ORDER A-36549A1 KIT FOR REPLACEMENT OF LEAD WIRE MARKERS |
| 29 | 85-63709A1 | PROTECTOR, SPARK PLUG LEAD |
| 30 | 85-94589 | SLEEVE, SPARK PLUG LEAD TO DISTRIBUTOR |
| 31 | 25-26547 | GROMMET, SPARK PLUG LEADS |
| 32 | 45409 | WIRE RETAINER, HIGH TENSION LEADS |
| 33 | 45392 | BRACKET, FRONT - WIRE RETAINER |
| 34 | 47398 | BRACKET, REAR - WIRE RETAINER |
| 35 | 10-62568 | SCREW, FRONT AND REAR BRACKET ATTACHING |
| 36 | 45391 | SPACER, RUBBER - HIGH TENSION LEADS |
| 37 | 332-4895A5 | IGNITION COIL ASSEMBLY, COMPLETE |
| 38 | 10-24624 | SCREW, COIL MOUNTING BRACKET ( 1 3/4") |
| 39 | 13-26992 | LOCKWASHER, COIL MOUNTING BRACKET |
| 40 | 10-88488 | SCREW, COIL MOUNTING BRACKER (3 1/4") |
| 41 | 23-52933 | SPACER, COIL BRACKET TO BOTTOM COWL |
| 42 | 11-8M0207775 | NUT, COIL MOUNTING BRACKET SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 25-92012 | GROMMET, PLASTIC - TRIM COVER SCREW Comment: SERIAL 02928721-09999999 |
| 1 | 1551-3918A3 | DRIVE SHAFT HOUSING ASSEMBLY (LONG SHAFT) |
| 2 | 16-56295 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING |
| 3 | 19-824928001 | PLUG, PLASTIC - TRIM TAB SCREW HOLE |
| 4 | 10-48409 | SCREW RETAINING STRIP TO DRIVE SHAFT HOUSING (5/8") |
| 5 | 10-48408 | SCREW, RETAINING STRIP TO DRIVE SHAFT HOUSING (1/2") |
| 6 | 37417 | COVER, TRIM - DRIVE SHAFT HOUSING |
| 7 | 10-57807 | SCREW, TRIM COVER TO BOTTOM COWL Comment: SERIAL 02928721-09999999 |
| 8 | 37919 | SEAL, TRIM COVER TO DRIVE SHAFT HOUSING |
| 9 | 37665 | STRIP, RETAINING - TRIM COVER SEAL (SIDE) |
| 10 | 38052 | STRIP, RETAINING - TRIM COVER SEAL (REAR) |
| 11 | 32-37438 | TUBE, WATER INLET (LONG SHAFT) |
| 12 | 38470 | TUBE, EXHAUST (LONG SHAFT) |
| 13 | 10-36137 | SCREW, TUBE TO EXTENSION PLATE (1") Comment: SERIAL 03023086-09999999 |
| 14 | 11-63149 | NUT, EXHAUST TUBE SCREW Comment: SERIAL 03023086-09999999 |
| 15 | 11-82670911 | NUT, POWERHEAD STUDS (5/16-24) |
| 16 | 11-23161 | NUT, POWERHEAD STUDS (3/8-24) |
| 17 | 12-20086 | WASHER, POWERHEAD STUDS |
| 18 | 27-48801 | GASKET, EXHAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 19 | 52887 | GUIDE, PUSH ROD - REVERSE LOCKING Comment: NOT TO BE USED WITH FULL POWER TRIM |
| 20 | 47558 | ROD, PUSH - REVERSE LOCK (LONG SHAFT) Comment: NOT TO BE USED WITH FULL POWER TRIM |
| 21 | 11-69254 | NUT, JAM - RUSH ROD Comment: NOT TO BE USED WITH FULL POWER TRIM |
| 22 | 47559 | YOKE, PUSH ROD Comment: NOT TO BE USED WITH FULL POWER TRIM |
| 23 | 24-78203A2 | PIN, PUSH ROD TO REVERSE LOCK Comment: NOT TO BE USED WITH FULL POWER TRIM |
| 24 | 18-25191 | COTTER PIN, PUSH ROD PIN Comment: NOT TO BE USED WITH FULL POWER TRIM |
| 25 | 75297 | MOUNT, RUBBER - UPPER (HEAVY DUTY) |
| 26 | 49239 | COVER, UPPER MOUNT - OUTSIDE HALF |
| 27 | 53141 | COVER, UPPERMOUNT - INSIDE HALF |
| 28 | 24929 | PACKING, "U" CUP |
| 29 | 10-20012 | SCREW, UPPER MOUNT COVER (1 5/8") |
| 30 | 10-28775 | SCREW, UPPER MOUNT COVER (2 1/8") |
| 31 | 12-8M0204649 | WASHER, UPPER MOUNT COVER SCREW |
| 32 | 11-35888 | NUT, UPPER MOUNT COVER SCREW |
| 33 | 12-31262 | WASHER, UPPERMOUNT BOLT |
| 34 | 12-47840 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 35 | 12-31263 | WAASHER, UPPER MOUNT BOLT |
| 36 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 37 | 75300 | MOUNT, RUBBER - LOWER (HEAVY DUTY) |
| 38 | 10-75284 | SCREW, LOWER MOUJNT (5 1/2") |
| 39 | 12-49339 | WASHER, LOWER MOUNT SCREW |
| 40 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 41 | 25067 | BUMPER, RUBBER - LOWER MOUNTING SCREW |
| 42 | 11-8M0204653 | NUT, GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 43 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 44 | 11-29489 | NUT, GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 45 | 12-45176 | WASHER, GEAR HOUSING TO DRIVWE SHAFT HOUSING STUDS |
| 46 | 35608 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 47 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 48 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING |
| 49 | 35474T | COVER, LOWER MOUNT CLAMP |
| 50 | 11-35521 | NUT, LWOER MOUNT CLAMP COVER |
| 51 | 10-29722 | SCREW, COVER TO LOWER CLAMP MOUNT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 2 | 11-52901 | NUT, FLYWHEEL Comment: (PART OF A-436-4842A3 CRANKSHAFT ASSEMBLY) |
| 3 | 12-33001 | WASHER, FLYWHEEL NUT |
| 4 | 225-2494A37 | FLYWHEEL ASSEMBLY, COMPLETE (SERIAL #3270480 AND UP) Comment: SERIAL 03270480-09999999 |
| 5 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL (5/8") |
| 6 | 10-68997 | SCREW, PLATE AND HUB TO FLEXIBLE PLATE (3/4") |
| 7 | 17-26618 | PIN, DOWEL - PULLEY TO FLYWHEEL |
| 8 | 29788 | FLANGE, FLYWHEEL PULLEY |
| 9 | 30306 | PULLEY, FLYWHEEL |
| 10 | 29787 | HUB, FLYWHEEL PULLEY |
| 11 | 398-4793 | STATOR, ALTERNATOR |
| 12 | 30050 | TERMINAL, STATOR LEAD WIRE |
| 13 | 10-63136 | SCREW, STATOR TO UPPER END CAP (7/8") |
| 14 | 54-26550 | CLIP STATOR/WIRING HARNESS LEADS FASTENING (5/16") |
| 15 | 10-62568 | SCREW, STATOR LEAD CLIP FASTENING (3/8") |
| 16 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 55156A5 | FUEL PUMP ASSEMBLY |
| 2 | 21-30430A3 | CHECK VALVE ASSEMBLY |
| 3 | 55278A1 | DIAPHRAGM KIT |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING |
| 8 | 10-69067 | SCREW, FUEL PUMP MOUNTING (1 3/8") |
| 9 | 22-328022 | PLUG, PIPE - BOTTOM PUMP |
| 10 | 32-33154A1 | FUEL LINE ASSEMBLY, PUMP TO CARBURETOR (14 1/8") |
| 11 | 22-30174 | ELBOW, UPPER CARBURETOR STRAINER COVER (90) |
| 12 | 22-30175 | SLEEVE, CARBURETOR STRAINER COVER ELBOW |
| 13 | 22-30177 | NUT, UPPER CARBURETOR STRAINER COVER ELBOW |
| 14 | 54-22627 | CLIP, FUEL LINE TO CYLINDER BLOCK |
| 15 | 10-62568 | SCREW, FUEL LINE CLIP TO CYLINDER BLOCK (3/8") |
| 16 | 8M0084613 | :D: WASHER, FUEL LINE CLIP SCREW |
| 17 | 22-8M0123050 | ELBOW, FUEL LINE TO CARBURETOR (45) |
| 18 | 32-31584A1 | FUEL LINE ASSEMBLY, CARBURETOR TO CARBURETOR |
| 19 | 32-55827A1 | FUEL LINE ASSEMBLY, PUMP TO CARBURETOR (9 1/2") |
| 20 | 32-55828A1 | FUEL LINE ASSEMBLY, PUMP TO PUMP (13 3/4") |
| 21 | 22-30468 | FITTING, TOP PUMP |
| 22 | 22-30175 | SLEEVE, OTP PUMP FITTING |
| 23 | 22-30177 | NUT, TOP PUMP FITTING |
| 24 | 32-55829 | FUEL LINE, ADAPTOR TO LOWER FUEL PUMP |
| 25 | 30186 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 26 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 27 | 24-30189 | SPRING, ADAPTOR STEM |
| 28 | 25-16524 | "O" RING, ADAPTOR STEM |
| 29 | 30188 | CUP WASHER, ADAPTOR |
| 30 | 10-88488 | SCREW, ADAPTOR TO BOTTOM COWL (3 1/4") |
| 31 | 11-8M0207775 | NUT, ADAPTOR FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1623-4934A20 | GEAR HOUSING ASSEMBLY, COMPLETE (LONG SHAFT) SEE NOTE |
| 1 | 1623-5244A6 | GEAR HOUSING ASSEMBLY |
| 2 | 55662 | SCREEN, WATER INLET EARLY MODELS ONLY Comment: EARLY MODELS ONLY |
| 3 | 24-57430 | SPRING, WATER INLET SCREEN RETAINING Comment: EARLY MODELS ONLY |
| 4 | 17-21438 | DOWEL PIN, GEAR HOUSING LOCATING |
| 5 | 16-57921 | STUD, GEAR HOUSING TO DRIVE SHARFT HOUSING (4") |
| 6 | 16-8M0133358 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (2 1/16") |
| 7 | 16-8M0034463 | STUD, WATER PUMP TO GEAR HOUSING (3 3/8") |
| 8 | 16-306671 | STUD, WATER PUMP TO GEAR HOUSING (1/4-20 X 3 1/8") |
| 9 | 31-32898T | BEARING, ROLLER - DRIVE SHAFT |
| 10 | 45-64389 | DRIVE SHAFT (LONG SHAFT) Comment: SERIAL 03023086-09999999 |
| 11 | 43-55688 | GEAR, PINION - DRIVE SHAFT |
| 12 | 11-35921 | NUT, PINION GEAR TO DRIVE SHAFT |
| 13 | 15-30278A1 | SHIM, WATER PUMP BASE TO GEAR HOUSING (.002-3-5-10) |
| 14 | 30-63326T | BEARING, BALL - DRIVE SHAFT |
| 15 | 53-30726 | RING, RETAINING - BALL BEARING |
| 16 | 27-32438 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 17 | 25-8M0204651 | "O" RING, WATER PUMP BASE |
| 18 | 46-48747A1 | WATER PUMP BASE ASSEMBLY |
| 19 | 26-94038 | OIL SEAL, WATER PUMP BASE |
| 20 | 26-16977 | OIL SEAL, WATER PUMP BASE |
| 21 | 17-35973 | DOWEL PIN, WATER PUMP BASE TO WATER PUMP BODY |
| 22 | 27-8M0090319 | GASKET, LOWER - WATER PUMP BASE TO FACE PLATE |
| 23 | 8M0204677 | PLATE, FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 24 | 27-858524 | GASKET, UPPER - FACE PLATE TO WATER PUMP BODY |
| 25 | 46-96148T1 | WATER PUMP BODY ASSEMBLY |
| 26 | 48752T | INSERT, WATER PUMP BODY |
| 27 | 26-16977 | OIL SEAL, WATER PUMP BODY |
| 28 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 29 | 47-89984T4 | IMPELLER - WATER PUMP |
| 30 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 31 | 10-30720 | SCREW, WATER PUMP BODY TO GEAR HOUSING (2 1/4") |
| 32 | 13-26992 | LOCKWASHER, WATER PUMP BODY SCREW |
| 33 | 12-8M0204649 | WASHER, WATER PUMP BODY FASTENING SCREW AND STUD |
| 34 | 11-826709109 | NUT, WATER PUMP FASTENING SCREW |
| 35 | 12-36001 | WASHER, WATER PUMP BODY FASTENING STUD |
| 36 | 11-826709111 | NUT, WATER PUMP BODY FASTENING STUD |
| 37 | 25-8M0214918 | RING, RUBBER - CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 38 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 39 | 25-8M0214919 | "O" RING, UPPER - DRIVE SHAFT (SERIAL #29335769 AND BELOW) Comment: SERIAL 00000000-29335769 |
| 40 | 37641001 | SEAL, EXHAUST TUBE |
| 41 | 38051 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 42 | 76062A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 43 | 53-29641 | "E" RING, RETAINING - SHIFT SHAFT |
| 44 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 45 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 46 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING (UPPER) |
| 47 | 12-31266 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 48 | 78036 | SPACER, LOWER - REVERSE LOCKING NOT USED WITH FULL POWER Comment: NOT USED WITH FULL POWER TRIM |
| 49 | 43308T1 | CAM, REVERSE LOCKING Comment: NOT USED WITH FULL POWER TRIM |
| 50 | 10-79953Q04 | SCREW, GREASE FILLER AND VENT HOLE |
| 51 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 52 | 19-48750 | PLUG, GEAR HOUSING FLUSHING HOLE |
| 53 | 12-8M0204663 | WASHER, GEAR HOUSING FLUSHING HOLE PLUG |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1623-4934A20 | GEAR HOUSING ASSEMBLY, COMPLETE (LONG SHAFT) Comment: SEE NOTE BELOW |
| 1 | 1623-5244A6 | GEAR HOUSING ASSEMBLY (SEE PAGE 27 FOR PARTS BREAKDOWN) |
| 54 | 760394 | CAM, SHIFT |
| 55 | 30625 | FOLLOWER, CAM |
| 56 | 30624 | SLIDE, CROSS PIN |
| 57 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 58 | 15-30923A1 | SHIM, BEARING OUTER RACE TO GEAR HOUSING (.002-3-5-10) |
| 59 | 31-30894A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 60 | 31-30895T | BEARING, ROLLER - FORWARD GEAR |
| 61 | 43-57011A4 | FORWARD GEAR ASSEMBLY |
| 62 | 52-822539T | RATCHET, SLIDING CLUTCH |
| 63 | 17-8M0100263 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 64 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 65 | 44-93003 | SHAFT, PROPELLER |
| 66 | 43-55689 | REVERSE GEAR ASSEMBLY |
| 67 | 15-29955A1 | SHIM, THRUST WASHER TO GEAR HOUSING (.002-3-5-10) |
| 68 | 12-71143A1 | WASHER, THRUST - BEARING CARRIER TO GEAR HOUSING |
| 69 | 30-31265 | BEARING, BALL - REVERSE GEAR |
| 70 | 25-29976 | "O" RING, BEARING CARRIER |
| 71 | 52132T1 | BEARING CARRIER ASSEMBLY |
| 72 | 31-30956T | BEARING, ROLLER - BEARING CARRIER |
| 73 | 26-8M0204670 | OIL SEAL, BEARING CARRIER |
| 74 | 28-30281 | KEY, LOATING - BEARING CARRIER |
| 75 | 14-52700 | TAB WASHER, GEAR HOUSING COVER |
| 76 | 52699 | COVER, GEAR HOUSING |
| 77 | 97-31640Q4 | TRIM TAB, GEAR HOUSING |
| 78 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 79 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 80 | 11-8M0204653 | NUT, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 81 | 10-34353 | SCREW, GEAR HOUSING TO DRIVE SHAFT HOUSING (1") Comment: PART OF A-1623-3909A3 AND A5 GEAR HOUSING ASSEMBLY ,COMPLETE |
| 83 | 12-29590 | WASHER, CUPPED - THRUST HUB |
| 84 | 12-31211Q03 | WASHER, SPLINED - PROPELLER NUT |
| 85 | 14-816629Q | TAB WASHER, PROPELLER NUT Comment: PART OF A-1623-3909A3 AND A5 GEAR HOUSING ASSEMBLY, COMPLETE |
| 86 | 11-52707Q1 | NUT, PROPELLER (PART OF A-1623-3909A3 AND A5 GEAR HOUSING AS |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 55642A13 | CONTROL PANEL ASSEMBLY, COMPLETE |
| 1 | 45060A7 | HYDRAULIC PUMP ASSEMBLY |
| 2 | 25-48171 | "O" RING, HYDRAULIC PUMP TO MANIFOLD PLATE |
| 3 | 10-79953Q04 | SCREW, FILLER - HYDRAULIC PUMP |
| 4 | 12-191833 | WASHER, SEALING - HYDRAULIC PUMP FILLER SCREW |
| 5 | 10-62269 | SCREW, VENT - HYDRAULIC PUMP |
| 6 | 37-55901 | DECAL, INSTRUCTION - HYDRAULIC PUMP |
| 7 | 32979 | BATTERY LEAD (POSITIVE) |
| 8 | 32988 | BATTERY LEAD (NEGATIVE) |
| 9 | 45336 | PLATE, MANIFOLD |
| 10 | 45197A2 | CONTROL VALVE ASSEMBLY |
| 11 | 25-45254 | "O" RING, CONTROL VALVE TO MANIFOLD PLATE (3/4"O.D.) |
| 12 | 25-48171 | "O" RING, CONTROL VALVE TO MANIFOLD PLATE (1/2"O.D.) |
| 13 | 25-45253 | "O" RING, CONTROL VALVE TO MANIFOLD PLATE (5/8"O.D.) |
| 14 | 10-56500 | SCREW, CONTROL VALVE AND MANIFOLD PLATE TO HYDRAULIC PUMP (1 |
| 15 | 13-26992 | LOCKWASHER, CONTROL VALVE AND MANIFOLD PLATE SCREW |
| 16 | 22-38609 | PLUG, CONTROL VALVE (3/8-24") |
| 17 | 22-46008 | PLUG, CONTROL VALVE (1/2-20") |
| 18 | 45325A1 | CONNECTOR AND HARNESS |
| 19 | 45559 | TERMINAL BLOCK, HYDRAULIC PUMP |
| 20 | 10-35519 | SCREW, TERMINAL BLOCK TO HYDRAULIC PUMP (1/2") |
| 21 | 10-62568 | SCREW, HANRESS LEADS TO TERMINAL BLOCK (3/8") |
| 22 | 45377T | BRACKET, MOUNTING - HYDRAULIC PUMP TO BOAT |
| 23 | 10-35386 | SCREW, MOUNTING BRACKET TO HYDRAULIC PUMP (1") |
| 24 | 13-39107 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 25 | 11-21908 | NUT, MOUNTING BRACKET SCREW |
| 26 | 10-68298 | BOLT, HYDRAULIC PUMP TO BOAT (3 1/4") |
| 27 | 11-35304 | NUT, HYDRAULIC PUMP BOLT |
| 28 | 25661T1 | STARTER SOLENOID |
| 29 | 10,13-26996 | LOCKWASHER, STARTER SOLENOID TERMINAL |
| 30 | 10,11-68219 | NUT, STARTER SOLENOID TERMINAL |
| 31 | 13-8M0204647 | LOCKWASHER, STARTER SOLENOID TERMINAL (5/16") |
| 32 | 11-22053 | NUT, STARTER SOLENOID TERMINAL (5/16") |
| 33 | 46265 | BOOT, RUBBER - STARTER SOLENOID TERMINAL |
| 34 | 74407T | BRACKET, MOUNTING - STARTER SOLENOID |
| 35 | 10-21140 | SCREW, MOUNTING BRACKET TO HYDRAULIC PUMP (1/2") |
| 36 | 13-26992 | LOCKWASHER, MOUNTING BRAKCET SCREW |
| 37 | 16-24290 | SCREW, STARTER SOLENOID TO MOUNTING BRACKET (5/8") |
| 38 | 13-26992 | LOCKWASHER, STARTER SOLENOID SCREW |
| 39 | 11-21825 | NUT, STARTER SOLENOID SCREW |
| 40 | 13-27660 | LOCKWASHER, HYDRAULIC PUMP THRU BOLT |
| 41 | 11-68219 | NUT, MOUNTING BRACKET TO HYDRAULIC PUMP THRU BOLT |
| 42 | 55642A17 | PANEL, CONTROL |
| 43 | 16-55422 | STUD, CONTROL PANEL TO BOAT (2") |
| 44 | 12-24676 | WASHER, CONTROL PANEL STUD |
| 45 | 11-27164 | NUT, CONTROL PANEL STUD |
| 46 | 55738A1 | SWITCH, PUSH BUTTON - CONTROL PANEL |
| 47 | 53107 | JUMPER WIRE, PUSH BUTTON SWITCH (PURPLE -3") |
| 48 | 55641 | RETAINER, PUSH BUTTON SWITCH |
| 49 | 10-62568 | SCREW, SWITCH RETAINER TO CONTROL PANEL (1/2") |
| 50 | 84-87394A20 | HARNESS, CONTROL PANEL (20 FEET) |
| 51 | 33865 | BINDER, NYLON - CONTROL PANEL HARNESS |
| 52 | 95814 | CLAMP, HARNESS FASTENING |
| 53 | 10-29227 | SCREW, HARNESS FASTENING CLAMP (1/2") |
| 54 | 11-34388 | NUT, HARNESS FASTENING SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 45060A7 | HYDRAULIC PUMP ASSEMBLY, COMPLETE |
| 1 | 25-48171 | "O" RING, HYDRAULIC PUMP |
| 2 | 392-7734 | VALVE BODY AND GEAR ASSEMBLY |
| 3 | 392-2618 | CAN, VALVE BODY |
| 4 | 10-20411 | SCREW, VALVE BODY TO RESERVIOR |
| 5 | 392-7735 | SEAL, RESERVIOR TO VALVE BODY AND GEAR |
| 6 | 392-2939 | RESERVIOR ASSEMBLY |
| 7 | 10-62269 | SCREW, VENT - HYDRAULIC PUMP |
| 8 | 10-79953Q04 | SCREW, FILLER - HYDRAULIC PUMP |
| 9 | 12-191833 | WASHER, SEALING - FILLER SCREW |
| 10 | 392-2623 | WASHER, THRUST - ARMATURE |
| 11 | 392-2943 | ARMATURE, FIELD AND FRAME |
| 12 | 392-2942 | FIELD AND FRAME ASSEMBLY |
| 13 | 392-2944 | BALL, COMMUTATOR END PLATE |
| 14 | 392-2940 | PLATE ASSEMBLY, COMMUTATOR END |
| 15 | 392-8989 | BRUSH SET, COMMUTATOR END PLATE |
| 16 | 392-2529 | SPRING SET, BRUSH TENSION |
| 17 | 392-2938 | BOLT SET, THRU - PLATE AND FRAME TO RESERVOIR |
| 18 | 13-26996 | LOCKWASHER, THRU BOLT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 79-73370A3 | TACHOMETER ASSEMBLY |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 39-78811A12 | RING, PISTON (.015 OVERSIZE) - 1/16" THICK |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 84-69236A1 | WIRING HARNESS, INTERNAL |
| 2 | 30050 | TERMINAL, HARNESS AND MERCURY SWITCH LEADS |
| 3 | 54-76368 | CLAMP, WIRING HARNESS TO BOTTOM COWL |
| 4 | 10-45862 | SCREW, WIRING HARNESS CLAMP TO BOTTOM COWL (7/8") |
| 5 | 13-26996 | LOCKWASHER, WIRING HARNESS CLAMP SCREW |
| 6 | 12-847883 | WASHER, WIRING HARNESS CLMAP SCREW |
| 7 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 8 | 10-98256 | SCREW, GROUND WIRE TO BOTTOM COWL |
| 9 | 13-24669 | LOCKWASHER, GROUND WIRE SCREW |
| 10 | 25-26547 | GROMMET, RECTIFIER TO SWITCH BOX WIRE (SERIAL #3114543 AND B Comment: SERIAL 00000000-03114543 |
| 11 | 54-648552 | CLIP, WIRING HARNESS TO FRONT BRACKET (1/8") |
| 12 | 10-62568 | SCREW, WIRING HARNESS TO FRONT BRACKET (3/8") |
| 13 | 8M0084613 | "D" WASHER, WIRING HARNESS CLIP SCREW |
| 14 | 45559 | TERMINAL BLOCK, STATOR LEADS |
| 15 | 10-62568 | SCREW, STATOR LEADS TO TERMINAL BLOCK (3/8") |
| 16 | 332-2986A21 | SWITCH BOX ASSEMBLY |
| 17 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 18 | 10-45218 | SCREW, SWITCH BOX (3/8") |
| 19 | 10-64279 | SCREW, SWITCH BOX TO FRONT MOUNTING BRACKET (1") |
| 20 | 11-8M0207775 | NUT, SWITCH BOX SCREW |
| 21 | 84-93389A12 | CABLE, WIRE - STARTER MOTOR TO FRONT SUPPORT BRACKET |
| 22 | 10-69035 | SCREW, WIRE CABLE TO STARTER MOTOR |
| 23 | 8M0043376 | STOP, RUBBER - STARTER MOTOR |
| 24 | 23-56774 | SPACER, COLLAR TO TOP MOUNTING CAP |
| 25 | 23-8M0034918 | COLLAR, RUBBER - STARTER MOTOR MOUNT |
| 26 | 50-898265010 | STARTER MOTOR ASSEMBLY |
| 27 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 28 | 11-20890 | NUT, STARTER MOTOR TERMINAL |
| 29 | 25661T1 | SOLENOID, STARTER |
| 30 | 10-69028 | SCREW, SOLENOID TO COIL BRACKET (3/4") |
| 31 | 13-26992 | LOCKWASHER, STARTER SOLENOID FASTENING SCREW |
| 32 | 269011 | BUMPER, RUBBER - STARTER SOLENOID |
| 33 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 34 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 35 | 48396 | CABLE, WIRE - STARTER MOTOR TO SOLENOID |
| 36 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 37 | 11-22053 | NUT, SOLENOID TERMINAL (5/16") |
| 38 | 46265 | BOOT, SOLENOID TERMINAL |
| 39 | 78614A1 | RECTIFIER ASSEMBLY |
| 40 | 10-64278 | SCREW, RECTIFIER TO MOUNTING BRACKET (1") |
| 41 | 11-8M0207775 | NUT, RECTIFIER MOUNTING SCREW |
| 42 | 11-45076 | NUT, FASTENING - RECTIFIER STATOR LEADS |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2114-3806 | COWL, TOP |
| 2 | 52733A9 | RETAINER ASSEMBLY - TOP COWL RETAINER Comment: SERIAL 03270480-09999999 |
| 3 | 35496 | PAD< BUMPER - COWL RETAINER |
| 4 | 37-61018A1 | EMBLEM, TOP COWL RETAINER Comment: SERIAL 00000000-02933900 |
| 5 | 10-74824 | SCREW, RETAINER TO TOP COWL (1 1/4") |
| 6 | 13-39107 | LOCKWASHER, RETAINER TO TOP COWL SCREW |
| 7 | 76370 | SHIELD, TOP COWL - REAR |
| 8 | 10-37370 | SCREW, SHIELD TO TOP COWL (5/8") |
| 9 | 13-37371 | LOCKWASHER, SHIELD SCREW |
| 10 | 47341A11 | ROPE, STARTER (FOR MANUAL STARTING ONLY) |
| 11 | 52739 | HINGE, COWL LATCH - TOP COWL |
| 12 | 94918F1 | LEVER, COWL LATCH HINGE |
| 13 | 17-58998 | PIN, ROLL - COWL LATCH LEVER TO HINGE |
| 14 | 24-53019 | SPRING, COWL LATCH HINGE Comment: SERIAL 00000000-03114543 |
| 15 | 55455 | HOOK, TOP COWL LATCH - REAR |
| 16 | 10-22956 | SCREW, REAR HOOK TO TOP COWL (7/8") |
| 17 | 13-26992 | LOCKWASHER, REAR HOOK MOUNTING SCREW |
| 18 | 79897A4 | FRAME, TOP COWL SUPPORT |
| 19 | 37-60204 | DECAL, TIMING Comment: SERIAL 03023086-09999999 |
| 20 | 46096 | MOUNT, RUBBER - TOP COWL FRAME (HEAVY DUTY) |
| 21 | 11-8267089 | NUT, RUBBER MOUNT TO TOP COWL FRAME |
| 22 | 54685 | BRACKET, TOP COWL SUPPORT - REAR |
| 23 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 24 | 13-26992 | LOCKWASHER, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 26 | 11-20088 | NUT, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 27 | 10-26065 | SCREW, REAR BRACKET TO TOP COWL FRAME (1") |
| 28 | 11-29250 | NUT, REAR BRACKET SCREW |
| 29 | 10-35386 | SCREW, REAR BRACKET TO BOTTOM COWL (1") |
| 30 | 13-8M0204647 | LOCKWASHER, REAR SUPPORT BRACKET SCREW |
| 31 | 77116A1 | BRACKET ASSEMBLY, TOP COWL SUPPORT - FRONT |
| 32 | 10-78841 | SCREW, FRONT BRACKET TO BOTTOM COWL (1 1/2") |
| 33 | 11-29250 | NUT, FRONT SUPPORT BRACKET SCREW |
| 34 | 10-73657 | SCREW, FRONT BRACKET TO TOP COWL FRAME (1 1/2") |
| 35 | 13-8M0204647 | LOCKWASHER, FRONT SUPPORT BRACKET SCREW |
| 36 | 37640 | MOUNT, RUBBER - FRONT SUPPORT BRACKET |
| 37 | 13-8M0204647 | LOCKWASHER, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 38 | 11-22053 | NUT, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 45194A9 | TRIM CYLINDER ASSEMBLY |
| 2 | 10-45265 | SCREW, BLEED - SHOCK CYLINDER |
| 3 | 25-45016 | "O" RING, SHOCK CYLINDER BLEED SCREW |
| 4 | 10-45264 | SCREW, SHOCK CYLINDER TO LOWER SHOCK PIN (1 9/16") |
| 5 | 23-45280 | SPACER, SHOCK CYLINDER - LOWER |
| 6 | 23-94907A1 | BUSHING, RUBBER - SHOCK CYLINDER |
| 7 | 89108A3 | BRACKET, MOUNTING - SHOCK CYLINDER (PORT) |
| 8 | 10-45263 | SCREW, MOUNTING BRACKET TO UPPER SHOCK PIN (2 1/4") |
| 9 | 10-68298 | BOLT, MOUNTING BRACKET TO BOAT TRANSOM (3 1/4") |
| 10 | 12-68410 | WASHER, MOUNTING BRACKET BOLT |
| 11 | 11-82670912 | NUT, MOUNTING BRACKET BOLT |
| 12 | 89807A1 | BRACKET ASSEMBLY, MOUNTING - SHOCK CYLINDER (STARBOARD) |
| 13 | 26-24590 | OIL SEAL, STARBOARD MOUNTING BRACKET |
| 14 | 89290 | PLUNGER, LIMIT SWITCH PLUNGER |
| 15 | 24-95881 | SPRING, TENSION - LIMIT SWITCH PLUNGER |
| 16 | 16-45282 | STUD, MOUNTING BRACKET AND CLAMP BRACKET |
| 17 | 13-8M0204647 | LOCKWASHER, MOUNTING BRACKET TO CLAMP BRACKET STUD |
| 18 | 11-28770 | NUT, MOUNTING BRACKET TO CLAMP BRACKET STUD |
| 19 | 10-45328 | SCREW, SHOCK CYLINDER TO MOUNTING BRACKET (3 9/16") |
| 20 | 12-37807 | WASHER, SHOCK CYLIONDER SCREW (STARBOARD ONLY) |
| 21 | 11-20696 | NUT, SHOCK CYLINDER SCREW |
| 22 | 24-24390 | SPRING, TENSION - ADJUSTING STUD |
| 23 | 16-8M0034461 | STUD, ADJUSTING - CUT-OUT LIMIT SWITCH |
| 24 | 11-8M0204718 | NUT, JAM - LIMIT SWITCH ADJUSTING STUD |
| 25 | 99897 | CAM, LIMIT SWITCH ADJUSTING STUD |
| 26 | 86967 | PLATE, RETAINING - LIMIT SWITCH CAM |
| 27 | 10-31903 | SCREW, RETAINING PLATE AND CAM TO SHOCK CYLINDER |
| 28 | 13-26996 | LOCKWASHER, RETAINING PLATE AND CAM SCREW |
| 29 | 45326A2 | SWITCH ASSEMBLY, CUT-OUT LIMIT SWITCH |
| 30 | 23-45354 | BUSHING, RUBBER - CUT-OUT LIMIT SWITCH |
| 31 | 10-47255 | SCREW, CUT-OUT LIMIT SWITCH TO MOUNTING BRACKET (9/16") |
| 32 | 45287 | COVER, LIMIT SWITCH |
| 33 | 27-45275 | GASKET, LIMIT SWITCH COVER |
| 34 | 10-24942 | SCREW, LIMIT SWITCH COVER TO MOUNTING BRACKET (7/16") |
| 35 | 87774A1 | COBER, INLET - TRANSOM |
| 36 | 27-45274 | GASKET, INLET COVER |
| 37 | 25-45507 | GROMMET, RUBBER - INLET COVER |
| 38 | 10-32866 | SCREW, INLET COVER TO BOAT (2") |
| 39 | 12-20878 | WASHER, INLET COVER SCREW |
| 40 | 11-8M0204718 | NUT, INLET COVER SCREW |
| 41 | 32-88005 | HOSE, TRIM - CYLINDER TO CONTROL VALVE (5') - 13/32"O.D. |
| 42 | 32-88006 | HOSE, LIFE - CYLINDER TO CONTROL VALVE (5') - 17/32"O.D. |
| 43 | 23-35977 | GROMMET, RUBBER - LIFT HOSE AND TRIM HOSE |
| 44 | 73519A1 | TILT STOP |
| 45 | 63441 | TUBE, MOUNTING - TILT STOP |
| 46 | 17-63442 | PIN, MOUNTING TUBE |
Regular maintenance keeps your Mercury 1150 running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
