Служба поддержки клиентов: info@jlm-marine.com
Бесплатная доставка. Минимальная сумма покупки отсутствует.
OEM and aftermarket replacement parts for Mercury 115 (6 CYL.). Scroll down for exploded parts diagrams (29), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 115 (6 CYL.) Reference Library — Exploded parts diagrams (29 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 115 (6 CYL.) is a 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve outboard motor. Powers center-console boats, larger pontoons, and offshore-capable fishing craft.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, SOHC, 8-valve |
| Horsepower | 115 HP |
| Displacement | 2100 cc (2.1L) |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK SILZKR7B11 |
| Engine Oil Capacity | 5.0 L (5.28 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | 24 fl oz (710 mL) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 115 (6 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 115 (6 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1301931 | AUTO-BLEND |
| 1 | 16612 | TANK KIT, Oil |
| 2 | 13996 | HANDLE KIT |
| 3 | 36-13986 | CAP, OIL TANK |
| 4 | 16614 | HARDWARE KIT |
| 5 | 19-13979 | PLUG KIT, Drain |
| 6 | 16611 | DIAPHRAGM KIT |
| 7 | 13990 | BRACKET |
| 8 | 13993 | BAND |
| 9 | 13983 | BRACKET (LEFT) |
| 10 | 13984 | BRACKET (RIGHT) |
| 11 | 16613 | COVER |
| 12 | 35-13985 | FILTER/SENSOR KIT, Oil |
| 13 | 13987 | HORN KIT |
| 14 | 84-13988 | HARNESS ASSEMBLY |
| 15 | 88-13989 | FUSE (.5 AMP) |
| 16 | 35-18089 | FILTER KIT, Fuel |
| 17 | 32-13992 | VINYL TUBE |
| 18 | 32-13995 | TUBE KIT, Fuel |
| 19 | 15387A1 | STRAINER ASSEMBLY, Oil |
| 20 | 21-16615 | CHECK VALVE KIT |
| 21 | 27-16616 | GASKET KIT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 130194 | AUTO BLEND ASSEMBLY |
| 1 | 16612 | TANK KIT, Oil |
| 2 | 13996 | HANDLE KIT |
| 3 | 36-16619 | CAP, Oil Tank |
| 4 | 16614 | HARDWARE KIT |
| 5 | 19-13979 | PLUG KIT, Drain |
| 6 | 16611 | DIAPHRAGM KIT |
| 7 | 16620 | BRACKET KIT, Mounting |
| 8 | 13993 | BAND |
| 9 | 13983 | BRACKET, Left |
| 10 | 13984 | BRACKET, Right |
| 11 | 16613 | COVER |
| 12 | 35-13985 | FILTER/SENSOR KIT, Oil |
| 13 | 35-18576 | FILTER KIT, Fuel |
| 14 | 32-13992 | VINYL TUBE |
| 15 | 16618 | STRAINER, Oil |
| 16 | 21-16615 | CHECK VALVE KIT |
| 17 | 16621 | PLATE |
| 18 | 19265 | MODULE KIT |
| 19 | 16623 | BRACKET KIT |
| 20 | 27-16616 | GASKET KIT |
| 21 | 84-14585A1 | HARNESS ASSEMBLY, Auto Blend |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-8963A2 | COWL ASSEMBLY, BOTTOM Comment: (GRAY) |
| 2 | 52862A2 | DRIP TRAY ASSEMBLY, BOTTOM COWL |
| 3 | 37940 | SOUND PAD, DRIP TRAY |
| 4 | 10-48408 | SCREW, (#10-16 x .500), DRIP TRAY TO BOTTOM COWL |
| 5 | 32-8M0108355 | HOSE, DRIP TRAY TO BOTTOM COWL (8") |
| 6 | 76369 | SPACER, BOTTOM COWL |
| 7 | 10-35519 | SCREW, (#10-16 x .500), SPACER TO BOTTOM COWL |
| 8 | 39616 | BOOT, CONTROL CABLES - BOTTOM COWL |
| 9 | 37637 | BOOT, FUEL CONNECTOR - BOTTOM COWL |
| 10 | 32-8M0108355 | LINE, (57.00 Inches Bulk), TELL TALE (21-1/2") |
| 11 | 52889 | NOZZLE, TELL TALE HOSE TO BOTTOM COWL |
| 12 | 10-48408 | SCREW, (#10-16 x .500) |
| 13 | 22-782792 | ELBOW, TELL TALE HOSE TO CYLINDER BLOCK |
| 14 | 60304A54 | SHIFT SHAFT ASSEMBLY, UPPER |
| 15 | 23-26856 | BUSHING, SHIFT SHAFT |
| 16 | 73402 | SHIFT LINK |
| 17 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel, LINK ROD |
| 18 | 11-36069 | NUT, LINK ROD |
| 19 | 13-29720 | WAVE WASHER, LINK ROD |
| 20 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 21 | 37896 | GUIDE BLOCK, LINK ROD |
| 22 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES |
| 23 | 98889 | LATCH Comment: (DESIGN II) |
| 24 | 10-42975 | DRIVE SCREW Comment: (DESIGN II) |
| 25 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING Comment: (DESIGN I) |
| 26 | 17-47175 | PIN Comment: (DESIGN I) |
| 27 | 90211 | COVER, NYLON - SHIFT CABLE Comment: (DESIGN I) |
| 28 | 65799T | LINK, LOCKING LEVER TO COVER Comment: (DESIGN I) |
| 29 | 39519 | CUP, BARREL RETAINER - ANCHOR |
| 30 | 10-35386 | SCREW, (.312-18 x 1.00) |
| 31 | 52100 | WEAR PLATE, LINK ROD |
| 32 | 8M0036768 | LATCH |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 1395-51091 | REPAIR PARTS KIT Comment: (1 PER CARBURETOR) |
| 1 | 1368-7472A29 | CARBURETOR (BOTTOM) Comment: (115) |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 3 | NSS | NOT SOLD SEPARATE, PIN-FLOAT LEVER PINION |
| 4 | NSS | NOT SOLD SEPARATE, LEVER, FLOAT (LOWER) |
| 5 | NSS | NOT SOLD SEPARATE, LEVER, FLOAT (UPPER) |
| 6 | 1395-83181 | NEEDLE, Inlet, SEAT AND GASKET |
| 7 | NSS | NOT SOLD SEPARATE, GASKET-INLET SEAT |
| 8 | NSS | NOT SOLD SEPARATE, GASKET, FLOAT BOWL COVER |
| 9 | 1395-5680 | COVER, FLOAT BOWL |
| 10 | 1395-8423 | JET, (.094), BOWL VENT Comment: (115) |
| 11 | 1395-5734 | HOSE, ECONOMIZER |
| 12 | 10-52195 | SCREW, FLOAT BOWL COVER |
| 13 | 1395-4804 | SCREW, FLOAT BOWL COVER |
| 14 | 8,13-26995 | LOCKWASHER, Stainless Steel, FLOAT BOWL COVER SCREW |
| 15 | 8146791 | LEVER, THROTTLE (SEE NOTE) |
| 16 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 17 | 1395-7942 | SHAFT, THROTTLE Comment: (CENTER/BOTTOM) |
| 18 | NSS | NOT SOLD SEPARATE, IDLE TUBE |
| 19 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 20 | 1395-8964 | SHUTTER, Throttle Comment: (115) |
| 21 | NSS | NOT SOLD SEPARATE, SCREW-THROTTLE SHUTTER |
| 22 | NSS | NOT SOLD SEPARATE, SPRING, IDLE ADJUSTMENT SCREW |
| 23 | NSS | NOT SOLD SEPARATE, SCREW, IDLE ADJUSTMENT |
| 24 | NSS | NOT SOLD SEPARATE, MAIN NOZZLE |
| 25 | 1395-4542 | SCREW, PLUG - MAIN NOZZLE |
| 26 | 1395-6207 | JET, (.072) Comment: (90/115) |
| 27 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 28 | NSS | NOT SOLD SEPARATE, GASKET, JET CHANNEL PLUG SCREW |
| 29 | 52106A1 | VENTURI, Plastic |
| 30 | NSS | NOT SOLD SEPARATE, SPRING, THROTTLE SHAFT RETURN |
| 31 | 1395-4543 | SCREW, BODY CHANNEL |
| 32 | NSS | NOT SOLD SEPARATE, WELCH PLUG, BODY CHANNEL |
| 33 | 27-481641 | GASKET, CARBURETOR FLANGE |
| 34 | 11-64809 | NUT, CARBURETOR SUTD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1368-7472A27 | CARBURETOR (TOP) Comment: (115) |
| 1A | 1368-7472A28 | CARBURETOR (CENTER) Comment: (115) |
| 2 | 1368-7472A29 | CARBURETOR (BOTTOM) Comment: (115) |
| 3 | 85943A1 | LEVER ASSEMBLY, THROTTLE (UPPER CARBURETOR) |
| 4 | 10-60293 | SCREW, (#5-40 x .500), THROTTLE LEVER |
| 5 | 12-74726 | WASHER |
| 6 | 53720A2 | COUPLING ASSEMBLY |
| 7 | 10-66104 | SCREW, (#8-32 x .790), THROTTLE BRACKET |
| 8 | 28-89694 | KEY, THROTLE COUPLING |
| 9 | 42859A2 | VALVE, Enrichner Comment: (ATTACHES WITH BRACKET) |
| 10 | 22-90275 | CONNECTOR, ENRICHNER VALVE (BOTTOM) |
| 11 | 22-73817 | CONNECTOR, (90 Degree), ENRICHNER VALVE (SIDE) |
| 12 | 90345 | BRACKET, ENRICHNER VALVE |
| 13 | 10-89075 | SCREW, VALVE TO BRACKET |
| 14 | 42859A2 | VALVE ASSEMBLY, Enrichner Comment: (ATTACHES WITH CLAMP) |
| 16 | 10-73286 | SCREW, (.250-20 x .500) Stainless Steel, CARBURETOR |
| 17 | 86-45915 | TERMINAL BLOCK, REED BLOCK HOUSING |
| 18 | 10-69079 | SCREW, (#10-16 x .440), TERMINAL BLOCK |
| 19 | 10-20411 | SCREW, (.190-24 x .62), WIRE TO TERMINAL BLOCK |
| 20 | 32-9912688 | TUBING, (36.00 Inches Bulk), ENRICHNER VALVE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2183-7928A3 | FRONT COVER ASSEMBLY |
| 2 | 56849 | KNOB, FRONT COVER |
| 3 | 12-30771 | WASHER, COVER KNOB (RUBBER) |
| 4 | 12-59572 | WASHER, COVER KNOB (PLASTIC) |
| 5 | 24-30772 | SPRING, TENSION - KNOB |
| 6 | 17-29077 | PIN, Roll, TENSION SPRING TO KNOB |
| 7 | 38674 | BLANKET, STARTER ROPE |
| 8 | 94924 | SEAL, SOUND - UPPER |
| 9 | 2136-4660A4 | WRAP AROUND COWL ASSEMBLY |
| 10 | 46785A1 | LATCH ASSEMBLY, Cowl |
| 11 | 30413 | HOOK, COWL LATCH |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2171-6497A7 | FRONT COVER |
| 2 | 56849 | KNOB, FRONT COVER |
| 3 | 12-30771 | WASHER, COVER KNOB (RUBBER) |
| 4 | 12-59572 | WASHER, COVER KNOB (PLASTIC) |
| 5 | 24-30772 | SPRING, TENSION - KNOB |
| 6 | 17-29077 | PIN, Roll, TENSION SPRING TO KNOB |
| 7 | 77790 | STRIP, SOUNG |
| 8 | 38674 | BLANKET, STARTER ROPE |
| 10 | 77544 | SEAL, SOUND - TOP |
| 11 | 2172-6498A9 | WRAP AROUND COWL |
| 12 | 46785A1 | LATCH ASSEMBLY, Cowl |
| 13 | 30413 | HOOK, COWL LATCH |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 436-9072A1 | CRANKSHAFT ASSEMBLY |
| 2 | 30-62567T | BEARING, Ball, UPPER |
| 3 | 30-63742T | BEARING, Ball, LOWER |
| 4 | 54196A6 | CARRIER ASSEMBLY |
| 5 | 65800 | PACKING, CARRIER |
| 6 | 535-5397A4 | BEARING ASSEMBLY, Center Main |
| 7 | 17-20032 | PIN, Dowel, CENTER MAIN BEARING |
| 8 | 29-714221 | BEARING, Needle, OUTER RACE |
| 9 | 26113T | RACE, OUTER (PAIR) |
| 10 | 53-26933 | RING, Snap, OUTER RACE |
| 11 | 17-47246 | PIN, Dowel, STEPPED |
| 12 | 10-22968 | SCREW, (.250-28 x 1.25), CENTER MAIN BEARING |
| 13 | 11-8M0207775 | NUT, (1/4-28X7/32), BEARING SCREW |
| 14 | 540-8663A3 | BEARING ASSEMBLY, Main Comment: (115) |
| 15 | 17-20032 | PIN, Dowel, MAIN BEARING |
| 16 | 10-45775 | SCREW, (#12-28 x .560) , MAIN BEARING |
| 17 | 11-45774 | NUT, MAIN BEARING SCREW |
| 18 | 34-99422A1 | REED SET, MATCHED Comment: (115) |
| 19 | 34-99421 | STOP, Reed, 4 PETAL Comment: (115) |
| 20 | 10-62204 | SCREW, REED STOP |
| 21 | 11-53153 | NUT, REED STOP SCREW |
| 22 | 774-9137A11 | PISTON ASSEMBLY Comment: (.030 O.S.)(115) |
| 23 | 53-857196 | RING, Lock, PISTON PIN |
| 24 | 39-88392A12 | RING SET, Piston - .030 Oversize |
| 25 | 624-8101A3 | CONNECTING ROD ASSEMBLY |
| 26 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 27 | 29-8M0214934 | BEARING, PISTON PIN |
| 28 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| 29 | 10-91012 | SCREW, (.250-28 Special), CONNECTING ROD |
| 30 | 15-38095A1 | SHIM, CRANKSHAFT BALL BEARING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-8310A4 | CYLINDER BLOCK ASSEMBLY Comment: (115) |
| 2 | 27-53862 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 66517 | RESTRICTOR, CRANKCASE BLEED |
| 4 | 16-64936 | STUD, CARBURETOR (1-1/4") |
| 5 | 16-64281 | STUD, (.375-16/.375-24 x 1.880) |
| 6 | 17-43044 | PIN, Dowel, CRANKCASE TO CYLINDER BLOCK |
| 7 | 17-63779 | PIN, Dowel (.250 x .625), CYLINDER BLOCK TO MAIN BEARING |
| 8 | 16-64282 | STUD, (4 In.), CYLINDER BLOCK TO PLATE (4") |
| 9 | 86473 | COVER, STARTER MOTOR - TOP |
| 10 | 10-73279 | SCREW, (.312-18 x 1.880), TOP COVER |
| 11 | 13-8M0204647 | LOCKWASHER, (.312) |
| 12 | 76867 | COVER, BOTTOM |
| 13 | 10-73279 | SCREW, (.312-18 x 1.880), BOTTOM COVER |
| 14 | 13-8M0204647 | LOCKWASHER, (.312) |
| 15 | 10-74824 | SCREW, (.312-18 x 1.250), CRANKCASE TO CYLINDER BLOCK |
| 16 | 12-26020 | WASHER |
| 18 | 10-20359 | SCREW, (.375-16 x 1.00), CENTER MAIN BEARING LOCKING |
| 19 | 14-20091 | TAB WASHER, BEARING LOCKING SCREW |
| 20 | 21-42866 | CHECK VALVE, BLEED HOSE - UPPER |
| 21 | 32-9938779 | HOSE, BLEED (22") |
| 22 | 21-428671 | CHECK VALVE, BLEED HOSE - LOWER |
| 23 | 22-996642 | ELBOW, BALANCE HOSE |
| 24 | 32-8M0108355 | LINE, (57.00 Inches Bulk) (6-1/4") |
| 25 | 22-97231 | TEE, BLEED HOSE |
| 26 | 12-20553 | WASHER, POWERHEAD STUDS |
| 27 | 11-82671013 | NUT, (.375-24), POWERHEAD STUDS |
| 28 | 11-69254 | NUT, POWERHEAD STUDS |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 17-8M0084726 | PIN, Dowel (.187 x .530), SPACER Comment: (EXTRA LONG SHAFT) |
| 1 | 1573-5239A51 | HOUSING ASSEMBLY, Driveshaft - Mariner |
| 2 | 16-56295 | STUD, (.437 x 2.69) |
| 3 | 19-64649 | PLUG, PLASTIC - TRIM TAB SCREW HOLE |
| 4 | 37417F2 | COVER, TRIM Comment: (MARINER) |
| 5 | 10-57807 | SCREW, (#10-16 x .750) Stainless Steel |
| 6 | 25-92012 | GROMMET, TRIM COVER SCREW |
| 7 | 84-88238T01 | CABLE ASSEMBLY, TRIM COVER SCREW |
| 8 | 10-62568 | SCREW, (#10-16 x .375), GROUND STRAP ATTACHING |
| 9 | 32-77121 | TUBE, WATER INLET Comment: (EXTRA LONG SHAFT) |
| 10 | 78184T | TUBE, EXHAUST Comment: (LONG SHAFT) |
| 11 | 65638 | BOOT, EXHAUST TUBE |
| 12 | 75299 | MOUNT, RUBBER - LOWER Comment: (LONG SHAFT) |
| 13 | 10-43426 | SCREW, UPPER MOUNT |
| 14 | 11-25096 | NUT, MOUNT SCREW |
| 15 | 12-30119 | WASHER, (.875 Inch Outside Diameter), UPPER MOUNT SCREW |
| 16 | 88238A10 | CABLE ASSEMBLY, Ground |
| 17 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel, GEAR HOUSING STUDS |
| 18 | 11-29489 | NUT, GEAR HOUSING STUDS |
| 19 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel, GEAR HOUSING STUDS |
| 20 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, GEAR HOUSING |
| 21 | 35608 | CLAMP, LOWER MOUNT TO DRIVESHAFT HOUSING |
| 22 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 23 | 10-29256 | SCREW, (.312-18 x .875) |
| 24 | 35474F2 | COVER, Lower Mount Clamp Comment: (GRAY) |
| 25 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 26 | 10-87884 | SCREW, (#12-14 x .920) |
| 27 | 10-28200 | SCREW, (.375-24 x 2.875), DRIVESHAFT HOUSING Comment: EARLY MODELS |
| 28 | 12-34714 | WASHER, HOUSING SCREW Comment: EARLY MODELS |
| 29 | 11-25269 | NUT, (.375-24) Comment: EARLY MODELS |
| 30 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel, GROUND WIRE |
| 31 | 12-49339 | WASHER, (.8125), LOWER MOUNT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-8310A4 | CYLINDER BLOCK ASSEMBLY Comment: (115) |
| 2 | 1161-7616A2 | END CAP ASSEMBLY |
| 3 | 26-41953 | SEAL, END CAP |
| 4 | 25-47254 | O-RING |
| 5 | 15-73644A1 | SHIM, END CAP (.006-10) |
| 6 | 10-812618 | SCREW, END CAP (1") |
| 7 | 1148-5410T1 | END CAP ASSEMBLY, LOWER |
| 8 | 26-41953 | SEAL, END CAP |
| 9 | 25-32546 | O-RING, END CAP |
| 10 | 15-20085A1 | SHIM SET, END CAP (.005-10) |
| 11 | 10-30225 | SCREW AND LOCKWASHER, (.312-18 x 1.00), END CAP |
| 12 | 71808 | COVER, WATER JACKET |
| 13 | 27-721421 | GASKET, WATER JACKET COVER |
| 14 | 10-53167T | SCREW, (.312-18 x .880), WATER JACKET COVER |
| 15 | 12-8M0042642 | WASHER, (.323 x .563 x .063) Stainless Steel |
| 16 | 27-854952 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 17 | 757781 | PLATE, Baffle, EXHAUST MANIFOLD |
| 18 | 27-854972 | GASKET |
| 19 | 99896A1 | COVER, EXHAUST MANIFOLD |
| 20 | 10-53576 | SCREW, (.312-18 x 1.125), MANIFOLD COVER |
| 21 | 1023-8368A1 | COVER, CYLINDER BLOCK |
| 22 | 27-981853 | GASKET, CYLINDER BLOCK COVER |
| 23 | 10-8M0214943 | SCREW, COVER (1") |
| 24 | 46933A3 | STRAP ASEMBLY, Ground |
| 25 | 10-62568 | SCREW, (#10-16 x .375), GROUND STRAP |
| 26 | 87-96829A1 | SWITCH ASSEMBLY, Temperature |
| 27 | 37440 | BRACKET, MOUNT SUPPORT |
| 28 | 10-35386 | SCREW, (.312-18 x 1.00), BRACKET TO CYLINDER BLOCK |
| 29 | 87872 | COVER, TRANSFER PORT |
| 30 | 27-856730 | GASKET, TRANSFER PORT COVER |
| 31 | 10-28636 | SCREW, (.250-20 x .750), TRANSFER PORT COVER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 43289A2 | PLATE ASSEMBLY, EXHAUST EXTENSION |
| 2 | 23-27132 | BUSHING, NYLON - EXHAUST EXTENSION PLATE |
| 3 | 17-23784 | PIN, Dowel, EXHAUST EXTENSION PLATE |
| 4 | 37918 | SEAL, EXHAUST PLATE |
| 5 | 99358 | STRIP, RETAINING - EXHAUST EXTENSION PLATE |
| 6 | 10-37571 | SCREW, (.190-32 x .500) |
| 7 | 27-692381 | GASKET, POWERHEAD |
| 8 | 10-66023 | SCREW, (.312-18 x 2.00) Flange Head, ADAPTOR PLATE TO HOUSING PLATE |
| 9 | 10-66023 | SCREW, (.312-18 x 2.00) Flange Head |
| 10 | 27-661021 | GASKET, DRIVESHAFT HOUSING PLATE |
| 11 | 26-60898 | SEAL, DRIVESHAFT HOUSING PLATE |
| 12 | 43290A4 | PLATE ASSEMBLY, DRIVESHAFT HOUSING |
| 13 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 14 | 17-23784 | PIN, Dowel, DRIVESHAFT HOUSING PLATE |
| 15 | 99700 | TUBE, Exhaust Comment: (115) |
| 16 | 10-65414 | SCREW (3/4 INCH) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, Yellow, FLYWHEEL |
| 2 | 11-52901 | NUT, (.625-18), FLYWHEEL |
| 3 | 12-33001 | WASHER, (.641 x 1.250 x .190), FLYWHEEL |
| 4 | 248-8722A7 | FLYWHEEL ASSEMBLY |
| 5 | 10-32417 | SCREW, (.250-28 x .625), FLYWHEEL PLATE |
| 6 | 10-68997 | SCREW, (.312-24 x .750), FLYWHEEL HUB |
| 7 | 398-5454A17 | STATOR ASSEMBLY |
| 8 | 10-75840 | SCREW, (#10-24 x .880), STATOR |
| 9 | 96455A9 | PLATE ASSEMBLY, Trigger |
| 10 | 54-61001 | J CLIP, TRIGGER HARNESS |
| 11 | 50-898265010 | STARTER MOTOR ASSEMBLY |
| 12 | 23-8M0034918 | COLLAR, STARTER MOTOR |
| 13 | 23-56774 | SPACER, STARTER MOTOR |
| 14 | 8M0043376 | STOP, RUBBER - STARTER MOTOR |
| 15 | 84-93388A1 | CABLE ASSEMBLY, (6.00 Inches) Black, PLATE TO STARTER MOTOR |
| 16 | 10-69035 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel, CABLE TO STARTER MOTOR |
| 17 | 84-93389A6 | CABLE ASSEMBLY, SOLENOID TO STARTER MOTOR (YELLOW) |
| 18 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, STARTER MOTOR TERMINAL |
| 19 | 11-64015 | NUT, (.250-20), STARTER MOTOR TERMINAL |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 32-18176A1 | HOSE KIT |
| 1 | 14360A78 | PUMP ASSEMBLY, Fuel |
| 2 | 21-857005A1 | DIAPHRAGM KIT |
| 3 | NSS | NOT SOLD SEPARATE, CHECK VALVE-RUBBER |
| 4 | NSS | NOT SOLD SEPARATE, GASKET-BOOST |
| 5 | NSS | NOT SOLD SEPARATE, DIAPHRAGM |
| 6 | NSS | NOT SOLD SEPARATE, GASKET-PULSE |
| 7 | NSS | NOT SOLD SEPARATE, SPRING |
| 8 | NSS | NOT SOLD SEPARATE, CAP |
| 9 | NSS | NOT SOLD SEPARATE, CHECK VALVE |
| 10 | NSS | NOT SOLD SEPARATE, RETAINER |
| 11 | NSS | NOT SOLD SEPARATE, SPRING |
| 12 | NSS | NOT SOLD SEPARATE, CAP |
| 13 | 27-8M0204705 | GASKET, BASE |
| 14 | NSS | NOT SOLD SEPARATE, GASKET-MOUNTING PLATE |
| 15 | 144303 | BASE, FUEL PUMP |
| 16 | 987752 | PLATE, FUEL PUMP |
| 17 | 22-56800 | PLUG, Pipe (.0625-27) |
| 18 | 22-19688 | FITTING |
| 19 | 10-4000310 | SCREW, (M5 x 40), FUEL PUMP |
| 20 | 10-16452 | SCREW, (#12-24 x 2.00), FUEL PUMP TO CRANKCASE |
| 21 | 32-8M0108349 | TUBING |
| 22 | 35-816296Q2 | FILTER, Fuel |
| 23 | 54-816311T | TIE STRAP, FUEL TUBING |
| 24 | 22-64705 | FITTING, FUEL LINE |
| 25 | 32-8M0108355 | LINE, (57.00 Inches Bulk) |
| 26 | 22-19688 | FITTING, UPPER CARBURETOR |
| 27 | 22-18214 | TEE, FUEL LINE |
| 28 | 22-64706001 | TEE, CENTER CARBURETOR |
| 29 | 22-19688 | FITTING, LOWER CARBURETOR |
| 30 | 22-36221 | ELBOW, FUEL LINE TO ADAPTOR |
| 31 | 30186 | ADAPTOR, CHECK UNIT |
| 32 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 33 | 24-30189 | SPRING, ADAPTOR STEM |
| 34 | 25-16524 | O-RING, ADAPTOR STEM |
| 35 | 30188 | WASHER, ADAPTOR |
| 36 | 10-36154 | SCREW, (.250-28 x 1.380), ADAPTOR TO BOTTOM COWL |
| 37 | 11-36069 | NUT, ADAPTOR SCREW |
| 38 | 14439A2 | PLATE, MOUNTING |
| 39 | 10-20189 | SCREW, (.190-32 x .75), PALTE TO CRANKCASE |
| 40 | 10,13-26996 | LOCKWASHER, Stainless Steel, PLATE SCREW |
| 41 | 32-18176 | HOSE |
| 42 | 32-18175 | HOSE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 13527A1 | PUMP ASSEMBLY, Fuel |
| 2 | 21-8M0084277 | CHECK VALVE ASSEMBLY |
| 3 | 89031A3 | DIAPHRAGM ASSEMBLY |
| 4 | NSS | NOT SOLD SEPARATE, GASKET-FUEL PUMP |
| 5 | NSS | NOT SOLD SEPARATE, GASKET-PULSE CHAMBER |
| 6 | NSS | NOT SOLD SEPARATE, GASKET-FUEL PUMP |
| 7 | NSS | NOT SOLD SEPARATE, GASKET-CHECK VALVE TO HOUSING |
| 8 | 35-59072 | SCREEN, FUEL INLET |
| 9 | 25-35480 | O-RING, (1.237 x .103), FUEL INLET COVER |
| 10 | 25-38933 | O-RING, COVER SCREW |
| 11 | 23004 | RETAINER, CHECK VALVE |
| 12 | 10-43723 | SCREW, (#6-32 x .500), RETAINER |
| 13 | 86295 | BASE, FUEL PUMP |
| 14 | 879901 | PULSE CHAMBER, FUEL PUMP |
| 15 | 35-91078A1 | COVER ASSEMBLY, FUEL INLET |
| 16 | 10-89766 | SCREW, (#10-32 x .620) Stainless Steel, FUEL FILTER COVER |
| 17 | 22-64705 | FITTING, INLET COVER |
| 18 | 10-41772 | SCREW, FUEL PUMP (1-1/2") |
| 19 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 20 | 22-19688 | FITTING, FUEL OUTLET |
| 21 | 86026 | RETAINER, SPRING |
| 22 | 24-86207 | SPRING, COMPRESSION |
| 23 | 86252 | CAP, SPRING END |
| 24 | 32-8M0108355 | LINE, (57.00 Inches Bulk) (W/O INLINE FILTER) |
| 25 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 26 | 22-19688 | FITTING, ELBOW - UPPER CARBURETOR |
| 27 | 22-73318 | TEE, Plastic, FUEL LINE |
| 28 | 22-64706001 | TEE, CENTER CARBURETOR |
| 29 | 22-19688 | FITTING, LOWER CARBURETOR |
| 30 | 32-8M0108355 | LINE, (57.00 Inches Bulk), ADAPTOR TO FUEL PUMP (18-1/2") |
| 31 | 22-63981 | FITTING, FUEL LINE TO ADAPTOR |
| 32 | 30186 | ADAPTOR, CHECK UNIT |
| 33 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 34 | 24-30189 | SPRING, ADAPTOR STEM |
| 35 | 25-16524 | O-RING, ADAPTOR STEM |
| 36 | 30188 | WASHER, ADAPTOR |
| 37 | 10-36154 | SCREW, (.250-28 x 1.380), ADAPTOR TO BOTTON COWL |
| 38 | 11-36069 | NUT, ADAPTOR SCREW |
| 39 | 32-8M0108355 | LINE, (57.00 Inches Bulk) |
| 40 | 54-68424 | CLAMP, FUEL LINE -WITH INLINE FILTER |
| 41 | 35-816296Q03 | FILTER, Fuel |
| 42 | 54-26404 | CLAMP, FUEL FILTER -WITH INLINE FILTER |
| 43 | 10-78291 | SCREW, (.190-24 x .500), FUEL FILTER CLAMP -WITH INLINE FILTER |
| 44 | 8M0084613 | C WASHER |
| 45 | 10,13-26996 | LOCKWASHER, Stainless Steel, CLAMP SCREW -WITH INLINE FILTER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1655-7333A43 | GEAR HOUSING ASSEMBLY Comment: (BASIC)(GRAY) |
| 2 | 22-85822A10 | CONNECTOR ASSEMBLY, SPEEDOMETER |
| 3 | 17-8M0084726 | PIN, Dowel (.187 x .530), GEAR HOUSING LOCATING |
| 4 | 16-77169 | STUD (9") Comment: (EXTRA LONG) |
| 5 | 16-74730 | STUD (7") Comment: (EXTRA LONG) |
| 6 | 16-8M0034463 | STUD, (.312 x 3.38), WATER PUMP |
| 7 | 16-69501 | STUD, WATER PUMP (3-1/8") |
| 8 | 31-32898T | BEARING, DRIVESHAFT |
| 9 | 45-42645 | DRIVESHAFT Comment: (EXTRA LONG SHAFT) |
| 10 | 43-68548T3 | GEAR, Pinion |
| 11 | 11-35921 | NUT, (.625-18) |
| 12 | 23-70412 | SPACER |
| 13 | 15-57007A1 | SHIM |
| 14 | 31-69220T | BEARING, Roller |
| 15 | 27-8M0214962 | GASKET |
| 16 | 25-8M0214923 | O-RING, (1.984 x .139) |
| 17 | 46-96146A5 | BASE ASSEMBLY, Water Pump |
| 18 | 26-94038 | SEAL, Oil, WATER PUMP |
| 19 | 26-16977 | SEAL, Oil, WATER PUMP |
| 20 | 27-8M0090319 | GASKET, LOWER |
| 21 | 8M0204677 | FACE PLATE |
| 22 | 27-858524 | GASKET, UPPER |
| 23 | 46-96148T1 | BODY ASSEMBLY, Water Pump |
| 24 | 48752T | INSERT, WATER PUMP |
| 25 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 26 | 47-89984T4 | IMPELLER, WATER PUMP |
| 27 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 28 | 10-8M0215009 | SCREW, (#14-8 x 2.25), WATER PUMP |
| 29 | 12-20583 | WASHER |
| 30 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 31 | 11-8267119 | NUT, (.250-28) |
| 32 | 12-36001 | WASHER |
| 33 | 11-82670911 | NUT, (.312-24) Stainless Steel |
| 34 | 25-8M0214918 | RING, Rubber, DRIVESHAFT |
| 35 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 36 | 37641001 | SEAL, EXHAUST |
| 37 | 38051 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 38 | 77122 | SHAFT, SHIFT - LOWER Comment: (EXTRA LONG SHAFT) |
| 39 | 53-29641 | E RING, RETAINING - SHIFT SHAFT |
| 40 | 25-25439 | O-RING, (.862 x .103), SHIFT SHAFT BUSHING |
| 41 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 42 | 26-8M0204708 | SEAL, Oil, SHIFT SHAFT BUSHING |
| 43 | 12-77674 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 44 | 78036 | BASE Comment: (NON-POWER TRIM) |
| 45 | 43308T1 | CAM Comment: (NON-POWER TRIM) |
| 46 | 22-8M0058389 | SCREW, Magnetic, DRAIN |
| 47 | 12-191833 | WASHER, Fiber, GREASE FILLER AND VENT HOLE SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1655-7333A43 | GEAR HOUSING ASSEMBLY Comment: (BASIC)(GRAY) |
| 48 | 760394 | CAM, Shift Control |
| 49 | 44532A1 | FOLLOWER ASSEMBLY, Cam |
| 51 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 52 | 15-30923A1 | SHIM, BEARING OUTER RACE (.002-3-5-10) |
| 53 | 31-30894A1 | BEARING SET, Cup And Cone |
| 54 | 43-68447T1 | GEAR ASSEMBLY, Forward |
| 55 | 31-30895T | BEARING, Needle, FORWARD GEAR |
| 56 | 52-822539T | RATCHET, SLIDING GEAR |
| 57 | 17-8M0100263 | PIN, Cross, RATCHET TO PROPELLER SHAFT |
| 58 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 59 | 44-93003 | PROPELLER SHAFT |
| 60 | 43-76250T | GEAR, Reverse |
| 61 | 12-76358 | THRUST WASHER, BEARING CARRIER |
| 62 | 25-29976 | O-RING, BEARING CARRIER |
| 63 | 41529T2 | CARRIER ASSEMBLY, Bearing |
| 64 | 22-8M0169588 | FITTING, Grease |
| 65 | 31-30956T | BEARING, Needle, BEARING CARRIER |
| 66 | 26-8M0204670 | SEAL (INSIDE) |
| 67 | 26-8M0205729 | SEAL, Oil, CUTTER (OUTSIDE) |
| 68 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 69 | 14-52700 | TAB WASHER, GEAR HOUSING COVER |
| 70 | 52699 | COVER, GEAR HOUSING |
| 71 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 72 | 10-66024 | SCREW, (.437-14 x 1.75), TRIM TAB TO GEAR HOUSING |
| 73 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel |
| 74 | 11-8M0204653 | NUT, (.437-20) Stainless Steel |
| 75 | 10-74727 | SCREW, (.375-16 x 6.00), GEAR HOUSING Comment: (EXTRA LONG SHAFT) |
| 76 | 13191Q01 | THRUST WASHER |
| 77 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 78 | 11-52707Q1 | PROP NUT KIT, (.750-16) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 99659A22 | MANIFOLD ASSEMBLY Comment: (GRAY) |
| 2 | 22-56800 | PIPE PLUG, MANIFOLD |
| 3 | 41493A7 | TRIM CYLINDER ASSEMBLY Comment: (GRAY) |
| 4 | 41492A1 | GUIDE ASSEMBLY |
| 5 | 25-41478A1 | REPAIR KIT |
| 6 | 41482A2 | CHECK VALVE KIT |
| 7 | 1100-8M0021648 | GUIDE ASSEMBLY, TRIM ROD |
| 8 | 878413A1 | PISTON/ROD ASSEMBLY, Power Trim, PORT |
| 9 | 35-12184A1 | TRIM FILTER ASSEMBLY |
| 10 | 878414T01 | PISTON/ROD ASSEMBLY, Power Trim, STARBOARD |
| 11 | 17-821539 | PIN, Groove, TRIM CYLINDER (UPPER) |
| 12 | 893929A01 | VALVE ASSEMBLY |
| 12A | 53-815949001 | E RING |
| 13 | 10-4000327 | SCREW, (M6 x 14), COVER |
| 14 | 12-4002315 | WASHER, COVER SCREW |
| 15 | 99642 | COVER, MANIFOLD |
| 16 | 25-48462A4 | O-RING KIT |
| 17 | 19-99609A1 | PLUG ASSEMBLY |
| 18 | 99641A1 | SHAFT ASSEMBLY |
| 19 | 22-56800 | PIPE PLUG, SHAFT |
| 20 | 10-4008820 | SCREW, (M6 x 20), PUMP AND MOTOR |
| 21 | 13-400256 | LOCKWASHER, (M6) |
| 22 | 826729A10 | PUMP AND MOTOR |
| 23 | 99625002 | SHAFT, UPPER |
| 24 | 97-818298Q1 | ANODE ASSEMBLY |
| 25 | 10-4000332 | SCREW, (M6 x 35), ANODE |
| 26 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, ANODE SCREW |
| 27 | 8M0045383 | STRIKER PLATE, TRIM SHAFT |
| 28 | 13-58643 | LOCKWASHER, (.375) |
| 29 | 11-46335 | NUT, (.375-24) |
| 30 | 84-17201A1 | CABLE ASSEMBLY, (6.00 Inches) (2 WIRE) |
| 31 | 84-79139A14 | WIRE ASSEMBLY (11 -1/2" - RED) |
| 32 | 8M0185622 | SOLENOID, Starter |
| 33 | 10-85486 | SCREW, (.250-20 x .380) Stainless Steel, STARTER SOLENOID |
| 34 | 8-32,11-26419 | NUT, Brass, SOLENOID TERMINAL |
| 35 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, SOLENOID TERMINAL |
| 36 | 11-94330 | NUT, (.250-20) Brass, SOLENOID TERMINAL |
| 37 | 85-97861 | INSULATOR, STARTER SOLENOID |
| 38 | 54-8M0024808 | J CLIP, PUMP WIRE |
| 39 | 8M0084613 | C WASHER, CLIP SCREW |
| 40 | 10-69079 | SCREW, (#10-16 x .440), CLIP TO TRANSOM BRACKET |
| 41 | 17-878267 | PIN, Groove, TRIM CYLINDER (LOWER) |
| 42 | 10-4000377 | SCREW, (M10 x 30), MANIFOLD |
| 43 | 13-400258 | LOCKWASHER, (M10) Stainless Steel, MANIFOLD SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 826729A10 | PUMP AND MOTOR |
| 1 | 12659 | FRAME AND FIELD KIT |
| 2 | 12665 | SPRING KIT, Brush |
| 3 | 13506 | BRUSH CARD KIT |
| 4 | 12662 | PUMP AND END FRAME KIT |
| 5 | 126631 | SEAL KIT, Pump |
| 6 | 12660 | END FRAME KIT |
| 7 | 12661 | ARMATURE KIT |
| 8 | 12664 | THRU BOLT KIT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 826729A10 | PUMP ASSEMBLY, Power Trim |
| 1 | 826729A10 | PUMP ASSEMBLY |
| 2 | 392-8996 | O-RING KIT |
| 3 | 392-8986 | ARMATURE |
| 4 | 392-8987 | FRAME AND FIELD |
| 5 | 392-8992 | O-RING, HEAD |
| 6 | 392-8993 | SPRING KIT, BRUSH |
| 7 | 392-8988 | HEAD, COMMUTATOR END |
| 8 | 392-8989 | BRUSH KIT |
| 9 | 392-8994 | THRU BOLT KIT |
| 10 | 392-8985 | CLAMP, LEAD WIRE |
| 11 | 392-8990 | NUT, PACKING |
| 12 | 392-8991 | O-RING, PACKING NUT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 50-898265010 | STARTER MOTOR ASSEMBLY |
| 1 | 90644 | DRIVE KIT |
| 2 | 685753 | DRIVE ASSEMBLY |
| 3 | 75660 | PLATE, DRIVE END |
| 4 | 10-74968 | BOLT, THRU |
| 6 | 74964 | ARMATURE |
| 7 | 898265016 | BRUSH/SPRING KIT |
| 8 | 23-57387 | BUSHING, INSULATING |
| 9 | 12-38013 | WASHER, INPUT STUD |
| 10 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, INPUT STUD |
| 11 | 11-20890 | NUT, (.250-20), INPUT STUD |
| 12 | 898265014 | HOLDER, BRUSH |
| 13 | 10-68586 | SCREW, BRUSH AND HOLDER |
| 14 | 15386001 | END CAP, COMMUTATOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 89748T | PLATE, ELECTRICAL MOUNTING |
| 2 | 10-455611 | SCREW, (.250-20 x 1.12), PLATE TO CYLINDER BLOCK |
| 3 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 4 | 87-33386A3 | SWITCH ASSEMLBY, MERCURY |
| 5 | 10-25764 | SCREW, (.190-32 x .50), MERCURY SWITCH TO PLATE |
| 6 | 10-32,11-45076 | NUT, Brass |
| 7 | 8M0058226 | RECTIFIER |
| 8 | 10-25764 | SCREW, (.190-32 x .50), RECTIFIER TO IGNITION PLATE |
| 9 | 10-32,11-45076 | NUT, Brass, RECTIFIER TERMINALS |
| 10 | 89-8M0185149 | SOLENOID ASSEMBLY, Starter |
| 12 | 8-32,11-26419 | NUT, Brass, SOLENOID TERMINALS |
| 13 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, SOLENOID TERMINALS |
| 14 | 11-94330 | NUT, (.250-20) Brass, SOLENOID TERMINALS |
| 15 | 10-28635 | SCREW, (.250-20 x .620) Stainless Steel, STARTER SOLENOID TO PLATE |
| 16 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 17 | 85-97861 | INSULATOR, STARTER SOLENOID |
| 18 | 332-7778A12 | SWITCHBOX ASSEMBLY |
| 19 | 10-20619 | SCREW, (#12-24 x 1.25), SWITCH BOX |
| 21 | 84-60871A10 | WIRE ASSEMBLY, SWITCH BOX |
| 22 | 10-69079 | SCREW, (#10-16 x .440), WIRE |
| 23 | 84-62310A3 | CABLE ASSEMBLY |
| 24 | 10-32,11-45076 | NUT, Brass |
| 25 | 23-94304 | SPACER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 41760A2 | REPAIR KIT, Shock Absorber |
| 1 | 1499-8710T21 | SWIVEL BRACKET ASSEMBLY Comment: (GRAY) |
| 2 | 26-87735 | SEAL, Oil, LOWER |
| 3 | 23-818764 | BUSHING, LOWER AND UPPER |
| 4 | 25-33466 | O-RING, UPPER |
| 5 | 23-67668 | SPACER, UPPER |
| 6 | 22-8M0169589 | FITTING, Grease |
| 7 | 23-821207 | BUSHING |
| 8 | 99661A2 | SWIVEL PIN ASSEMBLY |
| 9 | 10-99621 | SCREW, (.437-20 x 6.620) |
| 10 | 75296 | MOUNT, RUBBER - UPPER |
| 11 | 12-47840 | WASHER |
| 12 | 12-31263 | WASHER |
| 13 | 11-8M0204653 | NUT, (.437-20) Stainless Steel |
| 14 | 92876A12 | LINK ASSEMBLY, Steering |
| 15 | 10-849838 | SCREW, (.375-24 x 1.25) |
| 16 | 11-8M0204726 | NUT, (.375-24) |
| 17 | 12-34931 | WASHER, (.406 x .734 x .063) Stainless Steel |
| 18 | 13-78854 | WAVE WASHER, BOTTOM YOKE |
| 19 | 99644F2 | YOKE, Bottom Comment: (GRAY) |
| 20 | 53-67684 | RING, Retaining |
| 21 | 12-67670 | WASHER, THRUST |
| 22 | 14664A2 | LOCK, Reverse |
| 23 | 11-82670911 | NUT, (.312-24) Stainless Steel Comment: (NON-POWER TRIM) |
| 24 | 996361 | YOKE Comment: (NON-POWER TRIM) |
| 25 | 24-44297 | SPRING Comment: (NON-POWER TRIM) |
| 26 | 12-8M0042642 | WASHER, (.323 x .563 x .063) Stainless Steel Comment: (NON-POWER TRIM) |
| 27 | 43414 | PUSH ROD (LONG SHAFT) Comment: (NON-POWER TRIM) |
| 28 | 92704 | GUIDE, PUSH ROD Comment: (NON-POWER TRIM) |
| 29 | 23-69132 | BUSHING, REVERSE LOCK SHAFT Comment: (NON-POWER TRIM) |
| 30 | 17-99663 | PIN, Clevis, REVERSE LOCK Comment: (NON-POWER TRIM) |
| 31 | 18-25191 | COTTER PIN, CLEVIS PIN Comment: (NON-POWER TRIM) |
| 32 | 24-996261 | SPRING, REVERSE LOCK Comment: (NON-POWER TRIM) |
| 33 | 18-47959 | COTTER PIN Comment: (NON-POWER TRIM) |
| 34 | 99606 | SHAFT, REVERSE LOCK Comment: (NON-POWER TRIM) |
| 35 | 18-45882 | COTTER PIN, SHAFT Comment: (NON-POWER TRIM) |
| 36 | 99653 | BRACKET, SHOCK ABSORBER Comment: (NON-POWER TRIM) |
| 37 | 99619 | SHAFT, SHOCK ABSORBER (LOWER) Comment: (NON-POWER TRIM) |
| 38 | 17-821539 | PIN, Groove, SHOCK ABSORBER Comment: (NON-POWER TRIM) |
| 39 | 10-4000377 | SCREW, (M10 x 30), BRACKET Comment: (NON-POWER TRIM) |
| 40 | 13-400258 | LOCKWASHER, (M10) Stainless Steel Comment: (NON-POWER TRIM) |
| 41 | 97-818298Q1 | ANODE ASSEMBLY |
| 42 | 10-4000332 | SCREW, (M6 x 35), ANODE |
| 43 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 44 | 55-99724T15 | SHOCK ABSORBER Comment: (GRAY)(NON-POWER TRIM) |
| 45 | 23-821207 | BUSHING, SHOCK ABSORBER Comment: (NON-POWER TRIM) |
| 46 | 99625002 | SHAFT, SHOCK ABSORBER (UPPER) Comment: (NON-POWER TRIM) |
| 47 | 28203 | BUMPER, TOP YOKE |
| 48 | 10-64014 | SCREW, (.250-28 x .500), SWIVEL BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-87132A87 | DECAL SET Comment: (115)(GRAY) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 79-895283Q45 | TACHOMETER Comment: (7K) |
| 2 | 79101T | BRACKET, MOUNTING |
| 3 | 88-72729 | LIGHT BULB, Wedge Base (14V - .19W) |
| 4 | 88-79888 | SOCKET, Light Bulb |
| 5 | 8-32,11-26419 | NUT, Brass |
| 6 | 84-86396A8 | HARNESS ASSEMBLY, Tachometer (5.00 Feet) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 79900 | LEVER, THROTTLE |
| 2 | 10-818165 | SCREW, (.375-16 x 1.75) Comment: (USE W/O NUT) |
| 3 | 12-68410 | WASHER Comment: (USE W/O NUT) |
| 4 | 11-8M0204726 | NUT, (.375-24) |
| 5 | 23-45818 | BUSHING, THROTTLE LEVER SCREW |
| 6 | 37587 | SWIVEL, THROTTLE LEVER TO THROTTLE CABLE |
| 7 | 11-8M0207775 | NUT, (1/4-28X7/32), THROTTLE CABLE TO SWIVEL |
| 8 | 10-75168 | SCREW, ADJUSTING - THROTTLE LEVER |
| 9 | 11-29598 | NUT, (.250-28) Stainless Steel, ADJUSTING SCREW |
| 10 | 52023 | CAP, NYLON - ADJUSTING SCREW |
| 11 | 77013A1 | SWIVEL, THROTTLE LEVER |
| 12 | 23-26856 | BUSHING, SWIVEL |
| 13 | 12-73288 | WASHER, SWIVEL |
| 14 | 13-29402 | WAVE WASHER, SWIVEL |
| 15 | 11-45774 | NUT, SWIVEL TO THROTTLE LEVER |
| 16 | 85300 | LINK ROD, THROTTLE |
| 17 | 23-74213 | BARREL, LINK ROD TO THROTTLE CAM |
| 18 | 88754 | CAM, Throttle Comment: (115) |
| 19 | 85082 | HOUSING, THROTTLE - UPPER |
| 20 | 24-95721 | SPRING, TORSION - SHAFT |
| 21 | 12-85303 | WASHER, PLASTIC - THROTTLE CAM |
| 22 | 79903F1 | HOUSING, THROTTLE - LOWER |
| 23 | 13-86498 | WAVE WASHER, SHAFT |
| 24 | 87937 | SHAFT, THROTTLE AND SPARK ADVANCE |
| 25 | 10-28239 | SCREW, (.250-20 x 2.50), THROTTLE HOUSING |
| 26 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel, THROTTLE HOUSING SCREW |
| 27 | 11-8267088 | NUT, (.250-20), THROTTLE HOUSING SCREW |
| 28 | 10-75168 | SCREW, ADJUSTING - LOWER HOUSING (2-1/4") |
| 29 | 11-29598 | NUT, (.250-28) Stainless Steel, ADJUSTING SCREW |
| 30 | 52023 | CAP, NYLON - ADJUSTING SCREW |
| 31 | 10-60464 | SCREW, ADJUSTING - LOWER HOUSING (2-1/8") |
| 32 | 10-32,11-68219 | NUT, Stainless Steel, ADJUSTING SCREW |
| 33 | 48039 | CAP, NYLON - ADJUSTING SCREW |
| 34 | 77013A1 | SWIVEL, SPARK LINK |
| 35 | 23-26856 | BUSHING, SWIVEL |
| 36 | 13-29402 | WAVE WASHER, SWIVEL |
| 37 | 12-73288 | WASHER, SWIVEL |
| 38 | 11-45774 | NUT, SWIVEL |
| 39 | 85301 | SPARK LINK |
| 40 | 74897T | PIVOT, SPARK LINK TO TRIGGER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2162-6392T6 | TOP COWL ASSEMBLY Comment: (GRAY) |
| 2 | 76440 | RETAINER ASSEMBLY Comment: (GRAY) |
| 3 | 10-25299 | SCREW, (.312-18 x .75) Comment: (GRAY) |
| 4 | 13-39107 | LOCKWASHER, (.312-24) |
| 5 | 76433 | SHIELD, REAR Comment: (GRAY) |
| 6 | 10-48409 | SCREW, (#10-16 x .625) Stainless Steel, SHIELD TO TOP COWL |
| 7 | 47341A11 | ROPE AND HANDLE KIT, Manual/Emergency Start, STARTER (FOR MANUAL STARTING ONLY) |
| 8 | 52739 | HINGE, COWL LATCH - TOP COWL |
| 9 | 94918F1 | LEVER, COWL LATCH HINGE |
| 10 | 17-58998 | PIN, COWL LATCH LEVER TO HINGE |
| 11 | 55455 | HOOK, TOP COWL LATCH - REAR |
| 12 | 10-22956 | SCREW, (.250-28 x .880), REAR HOOK TO TOP COWL |
| 13 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 14 | 79897A4 | FRAME, TOP COWL SUPPORT |
| 15 | 46096 | MOUNT, RUBBER - TOP COWL FRAME Comment: (HEAVY DUTY) |
| 16 | 11-8M0207775 | NUT, (1/4-28X7/32), RUBBER MOUNT |
| 17 | 86472 | BRACKET, TOP COWL SUPPORT - REAR |
| 18 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 19 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, RUBBER MOUNT |
| 20 | 11-29598 | NUT, (.250-28) Stainless Steel |
| 21 | 10-37562 | SCREW, (.312-18 x 1.00) Stainless Steel, REAR BRACKET TO FRAME |
| 22 | 13-8M0204647 | LOCKWASHER, (.312) |
| 23 | 10-37562 | SCREW, (.312-18 x 1.00) Stainless Steel, REAR BRACKET TO BOTTOM COWL |
| 24 | 13-8M0204647 | LOCKWASHER, (.312) |
| 25 | 42706A1 | BRACKET ASSEMBLY, TOP COWL - FRONT |
| 26 | 10-60411 | SCREW, (1.25), FRONT BRACKET TO BOTTOM COWL |
| 27 | 13-8M0204647 | LOCKWASHER, (.312) |
| 28 | 10-60411 | SCREW, (1.25), FRONT BRACKET TO TOP COWL FRAME |
| 29 | 13-8M0204647 | LOCKWASHER, (.312) |
| 30 | 37640 | MOUNT, RUBBER - FRONT SUPPORT BRACKET |
| 31 | 13-8M0204647 | LOCKWASHER, (.312) |
| 32 | 11-28770 | NUT, (.312-24) Stainless Steel |
| 33 | 87991 | POINTER, TIMING |
| 34 | 10-28636 | SCREW, (.250-20 x .750), TIMING POINTER |
| 35 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel |
| 36 | 87076A4 | IDLE SPEED CONTROL ASSEMBLY Comment: (115) |
| 37 | 10-24637 | SCREW, (#10-32 x .875), IDLE SPEED CONTROL ATTACHING Comment: (115) |
| 38 | 10-32,11-20110 | NUT, Comment: (115) |
| 39 | 12-38833 | WASHER Comment: (115) |
| 40 | 54-47483 | J CLIP, FRONT COWL SUPPORT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3401-8718F8 | BRACKET ASSEMBLY, Transom (STARBOARD) Comment: MARINER |
| 2 | 3400-8716A9 | BRACKET ASSEMBLY, Transom (PORT) Comment: MARINER |
| 3 | 22-8M0169588 | FITTING, Grease, PORT TRANSOM BRACKET |
| 4 | 17-8M0026068 | PIN ASSEMBLY, Tilt Lock (NON-POWER TRIM) |
| 5 | 99170A2 | TILT TUBE |
| 6 | 11-859133 | NUT, (1.00-14), TILT TUBE |
| 7 | 25-45711 | O-RING, (.612 x .103), TILT TUBE |
| 8 | 13-88750 | WASHER, TILT TUBE |
| 9 | 11-858869 | NUT, (.875-14), TILT TUBE |
| 10 | 10-8M0149747 | SCREW, (.500-20 x 4.500), TRANSOM BRACKET TO TRANSOM |
| 11 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel, TRANSOM BRACKET BOLT |
| 12 | 11-91962 | NUT, (.500-20), TRANSOM BRACKET BOLT |
| 13 | 8M0115104 | LEVER ASSEMBLY, TILT LOCK |
| 14 | 13-99611 | WAVE WASHER, TILT LEVER |
| 15 | 23-65830 | NYLINER, TILT LEVER |
| 16 | 99633 | KNOB, TILT LOCK LEVER Comment: (MARINER) |
| 17 | 17-99615 | PIN, Groove |
| 18 | 24-99622 | SPRING |
| 19 | 17-99604 | PIN, Groove |
| 20 | 10-96930A1 | BOLT ASSEMBLY, TILT LOCK |
| 21 | 11-23161 | NUT, (.375-24) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 339-832757A4 | COIL ASSEMBLY, Ignition |
| 2 | 43542 | COVER, IGNITION COIL |
| 3 | 10-88856 | SCREW, (.190-32 x 2.00), IGNITION COIL COVER |
| 4 | 10-32,11-45076 | NUT, Brass, IGNITION COIL TERMINAL |
| 5 | 84-88807A13 | CABLE ASSEMBLY, IGNITION COIL (BLACK - 5-1/4") |
| 6 | 84-813715A10 | CABLE ASSEMBLY, HIGH TENSION |
| 7 | 85-63709A1 | BOOT/TERMINAL KIT, SPARK PLUG END |
| 8 | 33-14103550 | SPARK PLUG, (NGK-BUZHW) (CANADA/BELGIUM) |
| 9 | 84-85537A1 | HARNESS ASSEMBLY, COIL TO SWITCH BOX (#1, 3 AND 5) |
| 11 | 84-96188A4 | HARNESS ASSEMBLY |
| 12 | 88-8M0207796 | FUSE, 20 Ampere |
| 13 | 84-95084A2 | CABLE ASSEMBLY, FUSE HOLDER |
| 14 | 54-88608 | CLAMP, WIRING HARNESS |
| 15 | 10-28636 | SCREW, (.250-20 x .750), WIRING HARNESS CLAMP |
| 16 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 17 | 89047 | BRACKET, WIRING HARNESS |
| 18 | 10-24637 | SCREW, (#10-32 x .875), WIRING HARNESS BRACKET |
| 19 | 12-38833 | WASHER |
| 20 | 10-32,11-20110 | NUT, |
| 21 | 88751 | CLAMP, WIRING HARNESS |
| 22 | 10-28636 | SCREW, (.250-20 x .750), WIRING HARNESS CLAMP |
| 23 | 12-20533 | WASHER |
| 24 | 84-88439A4 | CABLE ASSEMBLY, Battery - Negative |
| 25 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel |
| 26 | 134731 | HOLDER, Fuse |
Regular maintenance keeps your Mercury 115 (6 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
