17461-87E00/10/11/12 Outboard Rubber Impeller with Key/Pin for Suzuki DT90 DT100 DF60 DF70 DF80 DF90 | JLM Marine

17461-87E00/10/11/12 Outboard Rubber Impeller with Key/Pin for Suzuki DT90 DT100 DF60 DF70 DF80 DF90

This high-quality aftermarket rubber impeller with key/pin is engineered to fit a range of Suzuki 2-stroke and 4-stroke outboard engines from 60 HP to 100 HP. Designed for reliable cooling system performance, it ensures consistent water flow to protect your engine from overheating during operation.

Direct Replacement for OEM Part Numbers: 17461-87E00, 17461-87E10, 17461-87E11, 17461-87E12. This impeller provides dependable aftermarket quality at a competitive price point.

• Complete assembly includes impeller, key, and pin for immediate installation
• Fits both 2-stroke and 4-stroke Suzuki outboards (60–100 HP range)
• Manufactured to OEM specifications for reliable cooling performance

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 × Outboard Rubber Impeller
• 1 × Key / Pin

Installation Guide

1. Disconnect the fuel line and remove the engine cowling to access the water pump housing. Ensure the engine is completely cool before beginning work.
2. Remove the lower unit by disconnecting the shift linkage and unbolting the mounting hardware. Set aside all fasteners in a clean container.
3. Unbolt and remove the water pump housing cover to expose the old impeller. Take note of the impeller blade orientation for reference.
4. Carefully extract the old impeller, key, and pin from the shaft. Inspect the housing for debris, corrosion, or wear.
5. Clean the pump housing thoroughly with fresh water and a soft brush. Remove any rubber fragments or buildup.
6. Lubricate the new impeller blades with glycerin, soapy water, or water pump grease (never petroleum-based products). This ensures smooth installation and prevents blade damage.
7. Insert the new key/pin into the drive shaft slot, ensuring it sits flush and secure.
8. Install the new impeller onto the shaft, aligning the keyway and rotating blades in the correct direction (typically clockwise when viewed from above).
9. Reinstall the water pump housing cover and torque all bolts to manufacturer specifications in a cross-pattern. Avoid over-tightening.
10. Reattach the lower unit, reconnect the shift linkage, and secure all mounting bolts.
11. Reconnect the fuel line and install the engine cowling. Double-check all connections.
12. Test the cooling system by running the engine in a barrel or on muffs. Confirm steady water flow from the telltale outlet within 10–15 seconds of starting.

Troubleshooting & FAQ

Q: How do I confirm this impeller fits my Suzuki outboard?
A: Cross-reference your engine model and year with the compatibility table above. You can also check your engine's parts diagram using the Suzuki Parts Catalog link provided, or verify the OEM part number (17461-87E00/10/11/12) on your existing impeller.

Q: How often should I replace my water pump impeller?
A: Suzuki recommends inspecting the impeller annually and replacing it every 2–3 years or 200–300 operating hours, whichever comes first. Replace immediately if you notice overheating, reduced water flow from the telltale, or visible blade damage.

Q: What are the signs of a failing impeller?
A: Common symptoms include engine overheating, weak or absent water stream from the telltale (pee hole), steam from the engine, or an overheat alarm. If you experience any of these, stop the engine immediately and inspect the impeller.

Q: Can I use petroleum-based grease when installing the impeller?
A: No. Petroleum-based lubricants will damage the rubber blades. Use only glycerin, soapy water, or water pump-specific grease during installation.

Q: Will this impeller work on both 2-stroke and 4-stroke Suzuki models?
A: Yes, this impeller is designed to fit both 2-stroke models (DT90, DT100 from 1988+) and 4-stroke models (DF60, DF70, DF80, DF90) as listed in the compatibility table.

Q: Is this an OEM part or an aftermarket replacement?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.