Customer Service: info@jlm-marine.com
Free shipping. No Minimum Purchase
Trim Sender Sensor 34804-99E00 – Suzuki DF25–DF250 99E
- $115.77
- $115.77
- Unit price
- per
Couldn't load pickup availability
Free Shipping
Free standard shipping on all orders
Worry-Free Returns
Learn More.
How to Match This Part
This aftermarket trim sender / trim angle sensor replaces Suzuki Marine 34804-99E00 (sender set) and the related individual sender numbers 34801-99E01 through 34801-99E05, plus set variant 34804-99E01. It mounts on the outboard tilt/trim assembly and feeds trim position to the helm gauge.
Match this part in this order:
1. OEM number on the removed sender or in your parts catalog — 34804-99E00, 34804-99E01, or 34801-99E01 / 99E02 / 99E03 / 99E04 / 99E05
2. Engine model — listed Suzuki DF models that call for the 34801-99Exx / 34804-99Exx sender family
3. Physical form — black plastic housing with lever arm, two mounting ears, and a 2-wire harness ending in a 2-pin plug (compare to the product images)
Do not order this listing if your catalog calls for the separate 34801-93Jxx sender (typically DF200 / DF225 / DF250 except TYPE:L). Confirm the number on the unit you are removing before purchase.
Part Number Cross-Reference
Use this table to confirm equivalent Suzuki numbers in the 34804-99Exx / 34801-99Exx family.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| Primary OEM Reference | Suzuki Marine | 34804-99E00 | Sender set, trim (primary reference) |
| OEM set variant | Suzuki Marine | 34804-99E01 | Related trim sender set number |
| OEM sender | Suzuki Marine | 34801-99E01 | Sender assembly (early supersession) |
| OEM supersession | Suzuki Marine | 34801-99E02 | Replaces earlier 34801-99E01 path |
| OEM supersession | Suzuki Marine | 34801-99E03 | Replaces 34801-99E02 |
| OEM supersession | Suzuki Marine | 34801-99E04 | Replaces 34801-99E03 |
| OEM supersession | Suzuki Marine | 34801-99E05 | Current supersession of 34801-99E04 |
| Aftermarket | Recmar | REC34801-99E04 | Interchange for this trim sender family |
Compatible Engines
Confirm your engine model and that your parts catalog calls for a 34804-99Exx or 34801-99Exx trim sender. For Suzuki serial and model guidance: Suzuki Parts Diagrams. The serial plate is typically on the transom bracket.
Important: Model and year alone are not enough. Match the OEM number on the removed sender. On DF200 / DF225 / DF250, this 99E family applies to TYPE:L applications; non-TYPE:L engines in that range typically use the separate 34801-93Jxx sender.
| Brand | Engine Model | HP | Years | Notes |
|---|---|---|---|---|
| Suzuki | DF25, DF30 (A) | 25–30 | 2000+ | When catalog calls for 34801-99Exx / 34804-99Exx |
| Suzuki | DF40, DF50 X-K10 | 40–50 | 2001–2011 | When catalog calls for 34801-99Exx / 34804-99Exx |
| Suzuki | DF60, DF70 W-K9 | 60–70 | 1998–2009 | When catalog calls for 34801-99Exx / 34804-99Exx |
| Suzuki | DF90, DF100, DF115 | 90–115 | 2001–2011 | OPT trim sender path includes 34804-99E00 |
| Suzuki | DF140 | 140 | 2002–2012 | When catalog calls for 34801-99Exx |
| Suzuki | DF150, DF175 (G/T/Z) | 150–175 | 2006+ | When catalog calls for 34801-99Exx |
| Suzuki | DF200, DF225, DF250 | 200–250 | 2004+ | TYPE:L only (99E path); not for 34801-93Jxx / non-TYPE:L |
Technical Specifications
| Specification | Value |
|---|---|
| Part type | Trim sender / trim angle sensor assembly |
| Primary OEM number | 34804-99E00 |
| Related OEM numbers | 34804-99E01; 34801-99E01 → 34801-99E05 |
| Function | Transmits outboard trim/tilt angle to the helm trim gauge |
| Form (as shown) | Black plastic housing, lever arm with pivot spring, two mounting ears, integrated harness |
| Connector | 2-wire harness ending in a 2-pin plug (see product images) |
| Application family | Suzuki DF25–DF250 calling for 34804-99Exx / 34801-99Exx (DF200–DF250: TYPE:L) |
Installation Guide
1
Disconnect the battery negative terminal. Locate the existing trim sender on the tilt/trim assembly near the hydraulic cylinder / transom bracket and note wire routing and lever orientation.
2
Unplug the harness connector. Remove the mounting fasteners that secure the sender body and carefully withdraw the old unit.
3
Install the new sender in the same orientation so the lever arm engages the trim cam/linkage as on the original. Refit mounting hardware to the original torque practice for your engine.
4
Reconnect the harness until the connector is fully seated. Route the cable clear of moving trim linkage and heat sources, then reconnect the battery.
5
Cycle trim/tilt through the full range and verify the helm gauge tracks smoothly. If your model requires a trim-limit reset after sender replacement, follow the procedure in the Suzuki service manual.
Note: Professional installation is recommended to ensure safety and optimal performance.
Troubleshooting & FAQ
Why Choose JLM MARINE?
- Precision Fit: Cross-reference matched to Suzuki 34804-99E00 and the verified 34801-99E01–34801-99E05 / 34804-99E01 family for listed DF applications.
- Quality Control: Each batch is inspected for dimensional consistency and workmanship.
- Direct from Manufacturer: Aftermarket marine parts engineered for reliable outboard trim-sender service.
We can ship to virtually any address in the world with free shipping available for most regions.
For our typical US and Canadian customers , our shipping timeframes are as follows:
- Amazon FBA: orders will be delivered within 1-5 business days after placing the order (during certain special periods such as major promotions, Christmas, etc., the delivery time of Amazon FBA may be affected).
- US warehouse shipment: orders will be delivered within 5 days after placing the order.
- China warehouse shipment: orders will be delivered about 12 days after placing the order.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.
As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.
We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.
Parts Finder
Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN.
Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
- Choosing a selection results in a full page refresh.