> > > >

Temperature Sensor 885342002 – Mercury Verado & MerCruiser

Vendor: JLM Marine
Availability: In Stock
Product Type: Sensor
$49.77
$49.77
Subtotal: $49.77

Free Shipping

Free standard shipping on all orders under 1 KG

Worry-Free Returns

Learn More.
Temperature Sensor 885342002 – Mercury Verado & MerCruiser

Temperature Sensor 885342002 – Mercury Verado & MerCruiser

$49.77

How to Match This Part

This aftermarket temperature sensor assembly replaces Mercury / Mariner / MerCruiser / Quicksilver 885342002 (covers earlier 885342001 and current superseding number 8M0148668). It is a threaded probe-style sensor used on listed Mercury and Mariner EFI, DFI, and Verado outboards, plus listed MerCruiser sterndrive and inboard applications.

Match this part in this order:
1. Number on the sensor you remove — 885342002, 885342001, or 8M0148668
2. Engine family — EFI / DFI / Verado outboard groups or listed MerCruiser MPI / MAG / inboard applications in the compatibility table
3. Serial number on the engine ID plate against the serial notes, then compare the threaded brass probe, hex body, sleeved pigtail, and two-pin blue-lock connector with the product images

Mercury lists 8M0148668 as the current functional replacement for 885342002; the replacement may look slightly different while remaining the correct supersession. Do not order by horsepower alone when a serial-number range is listed.

Part Number Cross-Reference

Use these verified Mercury numbers to confirm you have the correct temperature sensor. Brand names and OEM numbers are for identification only.

Type Brand Part Number Notes
OEM Mercury / Mariner / MerCruiser / Quicksilver 885342002 Primary listing number; SENSOR ASSY-TEMP
OEM Mercury / Mariner / MerCruiser / Quicksilver 885342001 Earlier number in the same supersession chain
OEM Mercury / Mariner / MerCruiser / Quicksilver 8M0148668 Current superseding functional replacement

This is an aftermarket part manufactured by JLM Marine. It is not sold as a genuine Mercury Marine, Mariner, MerCruiser, or Quicksilver component.

Compatible Engine Models

Confirm your engine model and serial number before ordering. For Mercury / Mariner outboards, use the Mercury Serial Number Guide and Mercury Parts Diagrams. For MerCruiser, use the engine identification plate on the engine — not an outboard transom-bracket location.

Brand Engine Family Rated HP / Models Serial / Notes
Mercury / Mariner EFI FourStroke 4-cylinder 40, 50, 60 EFI OEM where-used includes 0P401000 / 0P515897 and 1C000001 / 1C050252 family blocks — confirm serial on the temperature-sensor diagram
Mercury / Mariner EFI FourStroke 75, 80, 90, 100, 115 EFI Covered blocks include 0P459572 / 1B366823 through 2B094995 — confirm serial
Mercury / Mariner DFI OptiMax 1.5L 75, 90, 115 DFI; 80 Jet; 115 Pro XS; 125 DFI 1B417702 / 1B586067 / 1B736885 / 1B751825 families — confirm serial
Mercury / Mariner DFI / EFI 2.5L & Racing XS V-135/150/175 DFI; V-150/200 EFI; selected XS / Sport XS 1B227000 / 1B417702 / 1E00xxxxx Racing blocks — confirm on diagram
Mercury 150 FourStroke 150 1B905505 & Up
Mercury / Mariner Verado 4-cylinder 4-stroke 135, 150, 175, 200 0P464488 / 0P514869 and 1B381712 / 1B517159 family ranges — confirm serial
Mercury / Mariner Verado / Pro Verado 6-cylinder 4-stroke 200, 225, 250, 275, 300; Pro 200/250/300; 350 / 400 0P520553 / 1B517434 / 2B034840 / 2B141124 / 2B144123 family ranges — confirm serial
Mercury / Mariner 3.0L DFI / EFI & Jet Drive 200 / 225 / 250 DFI–EFI; Pro XS; 200 DFI Jet 1B417702 / 1B504989 / 1B912786 and Jet 0E / 0M / 1B powerhead–pump blocks — confirm serial
MerCruiser MPI / MAG / Inboard / Scorpion 3.0L–8.2L MPI; 350/377/496 MAG; 8.1L; 525 EFI; selected Racing SCi Dealer where-used lists serial blocks such as 0W650000 / 0W690000 / 1A0xxxxx / 2A0xxxxx families — match the OEM number on the sensor you remove

Always match the number stamped on the sensor you remove. Engines outside these groups use different temperature-sensor part numbers.

Technical Specifications

Specification Value
Part type Temperature sensor assembly (SENSOR ASSY-TEMP)
Primary OEM number replaced 885342002
Related / current OEM numbers 885342001 (earlier); 8M0148668 (current supersession)
Mounting form Threaded probe with hex drive body
Lead / connector Black sleeved pigtail to two-pin connector with blue locking tabs
Visible body Brass-tone metal probe and hex section
Condition Brand new aftermarket (not remanufactured)

Installation Guide

  1. 1Confirm the stamped number on the sensor you remove is 885342002, 885342001, or 8M0148668, and that your engine/serial appears in the compatibility table.
  2. 2Disconnect the battery negative cable and allow the engine to cool before opening the cowling or engine compartment.
  3. 3Release the blue connector locks and unplug the sensor by the connector housing. Do not pull on the wires.
  4. 4Place an absorbent cloth below the sensor, remove the old unit with the correct wrench on the hex body, and keep debris out of the threaded opening.
  5. 5Start the replacement by hand to prevent cross-threading, then tighten to the torque in your Mercury / MerCruiser service manual for that engine.
  6. 6Reconnect the plug until it locks, reconnect the battery, then run the engine per the service procedure while checking for leakage, warning messages, and a normal temperature reading.

Note: Professional installation is recommended for temperature sensors on EFI, DFI, Verado, and MerCruiser powerplants.

Troubleshooting & FAQ

How do I confirm this fits my engine? +

Start with the number on the sensor you remove. If it reads 885342002, 885342001, or 8M0148668, match your engine family and serial to the compatibility table and the OEM temperature-sensor diagram before ordering.

Does this replace 885342001 and 8M0148668 as well? +

Yes. 885342001 is an earlier number in the chain; 8M0148668 is the current Mercury functional replacement for 885342002. Confirm the engine model and serial as well as the stamped number.

Why might the replacement look slightly different? +

Mercury superseded 885342002 with 8M0148668 as a functional replacement that may look different. Compare part numbers plus the threaded probe, hex body, sleeved lead, and blue-lock connector — not appearance alone.

Is this an OEM or aftermarket part? +

This is an aftermarket replacement manufactured by JLM Marine. It is not a genuine Mercury Marine, Mariner, MerCruiser, or Quicksilver part. OEM numbers are listed only for cross-matching.

Important Notes

  • Verify the OEM number on your original sensor and your engine serial against the compatibility table before ordering.
  • Confirm thread engagement and connector lock after installation; check for leaks and correct temperature readings on first run.
  • This is an aftermarket replacement and is not a genuine Mercury Marine / Mariner / MerCruiser / Quicksilver OEM component.
  • Professional installation is recommended for EFI, DFI, Verado, and MerCruiser temperature sensors.

Why Choose JLM MARINE?

  • Precision Fit: Cross-referenced to Mercury 885342002 (covers 885342001 / 8M0148668) for the EFI, DFI, Verado, and MerCruiser applications listed above.
  • Quality Control: Each batch is inspected for dimensional consistency and workmanship.
  • Direct from Manufacturer: Aftermarket marine temperature sensors engineered for reliable engine temperature feedback.

We can ship to virtually any address in the world with free shipping available for most regions.

For our typical US and Canadian customers , our shipping timeframes are as follows:

  • Amazon FBA: orders will be delivered within 1-5 business days after placing the order (during certain special periods such as major promotions, Christmas, etc., the delivery time of Amazon FBA may be affected).
  • US warehouse shipment: orders will be delivered within 5 days after placing the order.
  • China warehouse shipment: orders will be delivered about 12 days after placing the order.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.

As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.

We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.

Related Products

Recently Viewed Products