Skeg Guard Kit – Fits Yamaha 150-350 HP Outboard Motors (Replaces 27151)

Skeg Guard Kit – Fits Yamaha 150-350 HP Outboard Motors (Replaces 27151)

This stainless steel skeg guard is designed to repair damaged skegs and protect the lower unit on a wide range of Yamaha outboard motors from 150 HP to 350 HP. It also fits select Suzuki, Mercury, and Mariner models. Installation is straightforward, mounting directly over your existing skeg (whether intact or damaged) with the included hardware.

This part is a direct replacement for Yamaha 27151, MegaWare 27151, Panther 35-SS645, and GlückMarine 27151.

• Installation Method: Simple bolt-on process (requires drilling).
• Durable Material: Constructed from mirror-polished 316 Marine Grade Stainless Steel for maximum corrosion resistance.
• Complete Kit: Includes all necessary mounting hardware for a complete installation.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 × Skeg Protector Guard
• 1 × Drill Bit
• 2 × Nuts
• 2 × Hex Wrenches
• 4 × Screws
• 1 × Installation Instructions

Installation Guide

Installation takes approximately 10-30 minutes. A minimum of 2-3 inches of the original skeg is required.

1. Thoroughly clean the skeg to remove any debris, oil, or marine growth.
2. Slide the new skeg guard over your existing skeg, ensuring it sits flush and is correctly aligned.
3. Mark the drilling points on your skeg using the pre-drilled holes in the guard as a template.
4. Remove the guard. Using the included drill bit, carefully drill holes through the marked points on the skeg.
5. Re-position the skeg guard, aligning its holes with the newly drilled holes in the skeg.
6. Insert the included screws and secure them with the nuts and hex wrenches provided.
7. Tighten the screws evenly until the guard is secure. Do not overtighten, as this can damage the skeg.
8. Confirm the guard is firmly in place and does not move. Ensure the drain hole is unobstructed.

Troubleshooting & FAQ

Q: How do I know if this skeg guard will fit my motor?

A: This guard fits a wide range of Yamaha, Suzuki, and Mercury/Mariner outboards. Please refer to the "Compatible Engine Models" table and verify your engine's brand, model, HP, and year. For a successful installation, you must have at least 2-3 inches of your original skeg remaining.

Q: Do I need to remove my old skeg to install this?

A: No, this protector is designed to install directly over your existing skeg, whether it's in good condition or already damaged. The kit includes all hardware needed to drill through the skeg and bolt the guard on.

Q: What is the benefit of the 316 stainless steel material?

A: This part is made from high-quality 316 marine-grade stainless steel with a reinforced lower edge. This provides superior strength and corrosion resistance compared to lower-grade metals, ensuring long-lasting protection against impacts from rocks, debris, and ramps.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.