Hydraulic Steering / Trailering Motor Lock Clip – Outboard Steering Stabilizer (Sold Each)

Product Overview

This hydraulic steering / trailering motor lock clip clips onto the outboard hydraulic steering cylinder to reduce side-to-side engine swing while trailering. Sold each — most boaters use a pair (one per side).

Marine polymer construction, rust-free vs metal hardware, suitable for saltwater and freshwater. Aftermarket steering stabilizer clip commonly used with Transom Saver kits. Not an OEM part — verify fit against your steering cylinder before ordering.

What's Included

• 1 × Trailering motor lock / hydraulic steering stabilizer clip (sold each)
• Contents match the product photo

Tip: order quantity 2 for a typical left/right pair.

Compatibility

Designed to clip onto many outboard hydraulic steering cylinders used with trailering motor lock / steering stabilizer applications.

• Verify clip opening against your steering cylinder diameter
• Most installations use two clips (left and right)
• Works alongside Transom Saver support bodies on the tilt/trim ram

Fitment is by cylinder style — contact us with a photo if unsure.

Technical Specs

Installation Notes

1. Locate the hydraulic steering cylinder on each side of the outboard.
2. Slide the lock clip onto the cylinder until snug to limit side-to-side movement.
3. Repeat on the opposite side if using a pair.
4. Remove both locks before launching.

Do not force-fit. If the clip does not seat cleanly, stop and verify cylinder diameter.

FAQ

Q: Sold each or as a pair?
A: Sold each. Most trailering setups use two clips (left and right).

Q: What do these locks do?
A: They clip onto the hydraulic steering cylinder to reduce side-to-side engine swing while trailering.

Q: Is this OEM?
A: No. This is an aftermarket steering stabilizer / trailering motor lock clip.

Q: Color / package for this listing?
A: This listing is a single lock clip. Order two if you need a left/right pair for hydraulic steering.