F80AHP4 60C-24560-00 Fuel Filter Assembly for Yamaha F75 F80 F90 F100 | JLM Marine

Fuel Filter Assembly for Yamaha F75 F80 F90 F100 Outboard Motors | OEM# 60C-24560-00

This fuel filter assembly is designed to fit Yamaha 4-stroke outboard engines ranging from 75 HP to 100 HP (2002–2004 model years). Engineered to maintain optimal fuel flow and protect your engine from contaminants, this component ensures reliable performance on the water.

Direct OEM Replacement: Replaces Yamaha part numbers 60C-24560-00 and 60C-24560-01, providing seamless compatibility with factory specifications.

• Complete fuel filter assembly ready for installation
• Fits select Yamaha F75, F80, F90, and F100 models (2002–2004)
• Helps maintain clean fuel delivery and engine longevity

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 × Fuel Filter Assembly

Installation Guide

1. Safety first: Disconnect the battery and ensure the engine is off and cool before beginning work.
2. Locate the fuel filter: Find the existing fuel filter assembly on your Yamaha outboard, typically mounted near the fuel pump or vapor separator.
3. Relieve fuel pressure: Open the fuel cap to vent the system, then carefully disconnect the fuel lines from the old filter.
4. Remove the old filter: Unbolt or unclip the mounting bracket holding the filter assembly in place.
5. Prepare the new filter: Inspect the new assembly for any damage and ensure all seals and O-rings are properly seated.
6. Install the new filter: Position the new fuel filter assembly onto the mounting bracket and secure it with bolts or clips.
7. Reconnect fuel lines: Attach the inlet and outlet fuel lines to the corresponding fittings on the new filter, ensuring a snug and leak-free connection.
8. Prime the system: Use the primer bulb to pump fuel through the new filter until it feels firm and fuel flows freely.
9. Check for leaks: Reconnect the battery, turn the ignition to the on position (without starting), and inspect all connections for fuel leaks.
10. Start the engine: Run the motor at idle for a few minutes and monitor performance and fuel flow.
11. Final inspection: Recheck all fittings and connections after the test run to confirm there are no drips or loose components.
12. Dispose of the old filter properly: Follow local regulations for the disposal of fuel-contaminated parts.

Troubleshooting & FAQ

Q: How do I confirm this fuel filter fits my Yamaha outboard?
A: Cross-reference your engine model and year with the compatibility table above. Verify that your original part number matches 60C-24560-00 or 60C-24560-01. If you are unsure, consult your engine parts diagram or contact us with your engine serial number.

Q: How often should I replace the fuel filter on my Yamaha outboard?
A: Yamaha recommends inspecting the fuel filter annually and replacing it every 100–200 hours of operation or every season, whichever comes first. If you notice performance issues such as rough idling, stalling, or hard starting, inspect and replace the filter sooner.

Q: What are the signs that my fuel filter needs replacement?
A: Common symptoms include difficulty starting, loss of power at high RPM, engine sputtering or stalling, and reduced fuel efficiency. Visual inspection may reveal discoloration, sediment buildup, or damage to the filter housing.

Q: Will this aftermarket fuel filter perform the same as the OEM Yamaha part?
A: Yes. This aftermarket replacement is manufactured to meet or exceed OEM specifications, using comparable materials and tolerances. It delivers the same filtration performance and durability as the original Yamaha component.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.