6E7-W0093-04-00 Carburetor Repair Kit for Yamaha Mercury Mariner | JLM Marine

Carburetor Repair Kit – Fits Yamaha & Mercury/Mariner 9.9-15 HP Outboards

This carburetor repair kit is engineered to restore reliable fuel delivery on Yamaha 9.9–15 HP outboards (1986–1995) and Mercury/Mariner 9.9–15 HP models (1979-UP). Designed as a direct replacement for OEM part number 6E7-W0093-04-00, it provides essential seals and components to rebuild your carburetor and eliminate fuel leaks or poor engine performance.

Whether you're performing routine maintenance or addressing carburetor issues, this kit delivers the precision-fit gaskets and seals needed to restore factory-level sealing and fuel efficiency across multiple Yamaha and Mercury/Mariner engine families.

• Complete seal and gasket set for carburetor overhaul
• Fits both Yamaha (1986–1995) and Mercury/Mariner (1979-UP) 9.9–15 HP outboards
• Direct replacement for OEM 6E7-W0093-04-00

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

For Mercury/Mariner owners, here's a guide to help you identify your engine's serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This carburetor repair kit includes all necessary seals and gaskets required for a complete carburetor rebuild on the following models:

• YAMAHA Marine 9.9 HP (1986-1995): Outboard Carburetor Repair Seal Kit
• YAMAHA Marine 15 HP (1986-1995): Outboard Carburetor Repair Seal Kit
• Mercury Mariner 9.9 HP (1979-UP): Outboard Carburetor Repair Seal Kit
• Mercury Mariner 15 HP (1979-UP): Outboard Carburetor Repair Seal Kit

Installation Guide

1. Disconnect the fuel line and remove the carburetor from the engine following the manufacturer's service manual.
2. Carefully disassemble the carburetor body, noting the position of jets, needles, and float assembly for reassembly.
3. Remove all old gaskets, seals, and O-rings; clean all carburetor surfaces thoroughly with carburetor cleaner.
4. Inspect jets and passages for blockages or corrosion; clear using compressed air or fine wire if necessary.
5. Install new gaskets and seals from the kit in the exact positions of the originals, ensuring proper alignment.
6. Reassemble the carburetor components in reverse order, tightening screws evenly to avoid warping the body.
7. Reinstall the carburetor onto the engine and reconnect the fuel line securely.
8. Prime the fuel system and start the engine; adjust idle and mixture screws per manufacturer specifications.
9. Check for fuel leaks around all gasket surfaces while the engine is running.
10. Test-run the engine under load to confirm smooth acceleration and stable idle.

Troubleshooting & FAQ

Q: How do I know if this kit fits my carburetor?
A: Verify your engine model and year in the compatibility table above, and cross-reference the OEM part number 6E7-W0093-04-00 with your service manual or parts diagram.

Q: What are the signs that I need to rebuild my carburetor?
A: Common symptoms include fuel leaks around the carburetor body, rough idle, poor acceleration, difficulty starting, or visible fuel weeping from gasket surfaces.

Q: How often should I replace carburetor seals?
A: Carburetor seals should be replaced whenever you perform a carburetor rebuild or if you notice fuel leaks. Routine replacement every 3–5 years or 300–500 hours of use helps maintain optimal performance.

Q: Can I reuse the old gaskets if they look intact?
A: No, always replace all gaskets and seals during a carburetor rebuild. Even if they appear undamaged, old seals lose elasticity and sealing capability, leading to air or fuel leaks.

Q: What's the difference between OEM and aftermarket carburetor kits?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.