8M0222280 Oil Filter Fuel Filter Gasket Kit for Yamaha F50 F60 T60 F115 | JLM Marine

8M0222280 Oil Filter Fuel Filter Gasket Kit for Yamaha F50 F60 T60 F115

This comprehensive maintenance kit is designed to fit Yamaha 4-stroke outboard engines, specifically the F50, F60, T60 (2005) and F115 (2000-2005) models. It provides all the essential filters and gaskets needed for routine service intervals, ensuring your engine runs smoothly and reliably.

This kit directly replaces OEM part number 8M0222280, delivering equivalent quality and fitment for your Yamaha outboard maintenance needs.

• Complete service kit including oil filter, fuel filter, gaskets, and gear oil pump
• Designed for Yamaha 4-stroke outboards from 50 HP to 115 HP
• Streamlines maintenance with all necessary components in one package

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This complete maintenance kit includes the following components:

• 5GH-13440-00-00 Oil Filter × 1 View Part →
• 68V-24563-00 Fuel Filter × 1 View Part →
• 90430-14M09-00 Gasket × 1
• 90430-08003-00 Lower Unit Drain Gasket × 2
• 24OP149 Gear Oil Pump × 1

Installation Guide

1. Preparation: Ensure the engine is off and cool. Gather necessary tools including a wrench, drain pan, and shop towels.
2. Oil Filter Replacement: Locate the oil filter on your engine. Unscrew the old filter and install the new 5GH-13440-00-00 oil filter, hand-tightening securely.
3. Fuel Filter Replacement: Locate the fuel filter in the fuel line. Disconnect fuel lines carefully, replace with the new 68V-24563-00 fuel filter, and reconnect securely.
4. Lower Unit Gasket Replacement: Position the boat so you can access the lower unit drain plugs. Remove the drain and fill plugs, allowing old gear oil to drain completely into your pan.
5. Install New Gaskets: Replace the old drain gaskets with the new 90430-08003-00 gaskets on both drain and fill plugs. Ensure gaskets are seated properly to prevent leaks.
6. Refill Gear Oil: Using the included gear oil pump (24OP149), refill the lower unit with appropriate gear oil until it flows from the top fill hole. Reinstall the fill plug first, then the drain plug.
7. Install Main Gasket: If servicing components requiring the 90430-14M09-00 gasket, clean mating surfaces thoroughly. Position the new gasket and reassemble components according to manufacturer torque specifications.
8. Final Check: Inspect all installed components for proper seating and tightness. Start the engine and check for leaks around all replaced filters and gaskets.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my specific Yamaha engine?
A: Verify your engine model and year against our compatibility table. Check your existing part numbers against 8M0222280 or the individual component numbers (5GH-13440-00-00, 68V-24563-00, etc.) to ensure proper fitment.

Q: How often should I replace these filters and gaskets?
A: Yamaha recommends oil and fuel filter replacement every 100 hours of operation or annually, whichever comes first. Lower unit gaskets should be replaced whenever servicing the lower unit or if any leaks are detected.

Q: What are the signs that my filters or gaskets need replacement?
A: Watch for reduced engine performance, difficulty starting, visible fuel or oil leaks around gasket areas, or discolored/contaminated fluids. Regular inspection during routine maintenance intervals is recommended.

Q: Can I reuse the old gaskets if they look okay?
A: No, always replace gaskets during service. Even gaskets that appear intact can lose their sealing properties once removed, leading to leaks and potential engine damage.

Q: Do I need any special tools to install this kit?
A: Basic hand tools are sufficient for most installations. The included gear oil pump (24OP149) simplifies lower unit refilling. A torque wrench is recommended for proper gasket compression.

Q: Is this an OEM or aftermarket product?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.