5005801 Ignition Switch & Lanyard for Johnson Evinrude | JLM Marine

Ignition Switch & Lanyard for Johnson Evinrude | OEM 5005801

This aftermarket ignition key switch and safety lanyard is engineered to fit Johnson and Evinrude outboard motors. Designed as a direct replacement for OEM part number 5005801, it ensures reliable ignition control and safety compliance for your boat.

Manufactured from high-quality metal and plastic materials, this switch delivers durability and long-lasting performance. The package includes both the ignition key switch and a safety lanyard, providing everything you need for installation.

• Direct plug-and-play replacement – no wire splicing required
• Includes safety lanyard with extended length of approximately 125 cm (49.2 in)
• Built to original factory specifications for perfect fitment

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here's a guide to help you identify your engine's serial/model: Johnson/Evinrude Serial Number Guide.

This ignition switch is designed to fit Johnson and Evinrude outboard boats. Please verify compatibility with your specific engine model before purchase.

Technical Specifications

Package Contents

Your purchase includes:

• 1 × Ignition Key Switch
• 1 × Safety Lanyard

Installation Guide

1. Disconnect the battery to prevent accidental ignition or electrical shock during installation.
2. Locate the existing ignition switch on your boat's control panel or helm. Remove any cover or trim as needed.
3. Disconnect the wiring harness from the old ignition switch by unplugging the connector. No wire cutting should be necessary.
4. Unscrew or unclip the old ignition switch from its mounting position and remove it.
5. Position the new ignition switch in the same mounting location. Secure it with screws or clips as per the original installation.
6. Plug the wiring harness connector into the new switch—it should click into place securely.
7. Attach the safety lanyard clip to the switch. Ensure it moves freely and the kill-switch function operates correctly.
8. Reconnect the battery and test the ignition switch by turning the key to the "ON" position. Verify that all electrical systems respond.
9. Test the safety lanyard by pulling it free from the switch while the engine is running (or key is on). The engine should immediately shut off.
10. Replace any trim or cover panels you removed earlier. Ensure all fasteners are tight and secure.

Troubleshooting & FAQ

Q: How do I confirm this ignition switch fits my Johnson or Evinrude engine?
A: Verify that your current ignition switch is OEM part number 5005801 or 175974. Check the physical dimensions (70mm × 30mm) and connector type against your original switch to ensure compatibility.

Q: Will this work without splicing wires?
A: Yes, this is a direct plug-and-play replacement. Simply disconnect the existing wiring harness from the old switch and plug it into the new one—no cutting or splicing required.

Q: What should I do if the engine won't start after installing the new switch?
A: First, confirm the wiring harness is fully seated and the connector is locked in place. Check that the safety lanyard is properly attached. If issues persist, verify battery voltage and inspect the starter circuit and fuses.

Q: How often should I replace the ignition switch?
A: Replace the ignition switch if you experience intermittent starting, failure to turn off, or physical damage to the switch or lanyard. Regular inspection during seasonal maintenance is recommended.

Q: Does the lanyard length affect safety?
A: The included lanyard extends to approximately 125 cm (49.2 in), which provides adequate range for typical helm positions. Always attach the lanyard to your person so the engine stops immediately if you move away from the controls.

Q: Is this an OEM part or aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.