17400-99852 17400-99870 Engine Maintenance Kit for Suzuki DF60 DF70 | JLM Marine

Engine Maintenance Kit – Fits Suzuki DF60 DF70 (2007-2009) | JLM Marine

This comprehensive 100 Hours Engine Maintenance Kit is designed for Suzuki 4-Stroke DF60 and DF70 outboard engines manufactured between 2007 and 2009. Engineered to meet rigorous marine service intervals, this kit delivers all essential components needed for routine engine maintenance in a single package.

Direct replacement for Suzuki OEM part numbers 17400-99852, 17400-99870, 17400-99871, and 17400-99861. This aftermarket maintenance kit includes a complete water pump repair kit, fuel filter, oil filter, drain gaskets, and anode set—everything required to keep your outboard running smoothly.

• Complete 100-hour service kit with water pump repair components, filters, and hardware
• Water pump impeller features 6 blades with key drive shaft type for reliable cooling performance
• Includes OEM-grade fuel filter, oil filter, and anode set for comprehensive maintenance

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This maintenance kit includes the following components:

• 1 x Water Pump Repair Kit (17400-99E12, 17400-99E01)
  • 17472-87E10 Gasket
  • 17471-99E00 Plate
  • 17461-87E12 Impeller
  • 09420-04009 Key
• 1 x Cotter Pin (09204-03003)
• 1 x Drain Gasket (09168-12017)
• 2 x Drain Gasket (59178-97J00)
• 1 x Fuel Filter (15410-87J30)
• 1 x Oil Filter (16510-87J01)
• 1 x Anode Set (55321-87J00)

Installation Guide

1. Ensure the engine is off and completely cool before beginning any maintenance work. Disconnect the battery to prevent accidental starts.
2. Remove the lower unit or gearcase by loosening the mounting bolts. Refer to your engine's service manual for proper removal sequence.
3. Access the water pump housing and carefully remove the old impeller, gaskets, and wear plate. Inspect the housing for scoring or damage.
4. Clean all mating surfaces thoroughly to remove old gasket material and debris. Use a non-abrasive cleaner to avoid damaging the housing.
5. Install the new impeller with blades oriented in the correct rotation direction. Apply marine grease to the impeller for easier installation and initial lubrication.
6. Position the new gasket and wear plate, ensuring proper alignment with mounting holes. Tighten fasteners to manufacturer's specified torque.
7. Replace the drain plug gaskets on the lower unit before reinstalling. This prevents future oil leaks.
8. Reinstall the lower unit or gearcase, ensuring the water tube seats properly into the pump housing. Torque all mounting bolts to specification.
9. Locate and replace the fuel filter, ensuring fuel lines are securely connected without leaks. Dispose of the old filter properly.
10. Replace the engine oil filter using an appropriate filter wrench. Lubricate the new filter's O-ring with fresh oil before installation.
11. Install the new anode set, checking that all mounting surfaces are clean for proper electrical contact. Anodes protect against galvanic corrosion.
12. Reconnect the battery, start the engine, and verify proper water flow from the cooling system. Check all connections for leaks during the first run.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my specific Suzuki outboard?
A: Verify that your engine is a 4-stroke DF60 or DF70 model manufactured between 2007 and 2009. Cross-reference your current OEM part numbers (17400-99852, 17400-99870, 17400-99871, or 17400-99861) with this kit. You can also use the Suzuki Parts Diagrams link above to confirm compatibility.

Q: How often should I perform this 100-hour maintenance service?
A: Suzuki recommends this service every 100 operating hours or annually, whichever comes first. If you operate in saltwater, sandy conditions, or at high speeds frequently, consider servicing at shorter intervals to ensure optimal performance and longevity.

Q: What are the signs that my water pump impeller needs replacement?
A: Common symptoms include reduced water flow from the tell-tale outlet, engine overheating, steam from the powerhead, or decreased cooling system pressure. If you notice any of these signs, inspect and replace the impeller immediately to prevent engine damage.

Q: Can I install this maintenance kit myself, or do I need professional help?
A: Installation requires mechanical aptitude and familiarity with outboard service procedures. You'll need basic hand tools, a torque wrench, and your engine's service manual for proper torque specifications. If you lack experience with lower unit removal or water pump service, professional installation is strongly recommended.

Q: Does this kit include engine oil, or just the oil filter?
A: This kit includes only the oil filter (16510-87J01). Engine oil is not included and must be purchased separately. Consult your owner's manual for the correct oil type and capacity for your DF60 or DF70 engine.

Q: Is this an OEM Suzuki part or an aftermarket replacement?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.