> > > >

Oxygen Sensor 65L-8592A-01 – Fits Yamaha 150–250HP V6 EFI

Vendor: JLM Marine
Availability: In Stock
Product Type: Sensor
$272.99
$272.99
Subtotal: $272.99

Envío gratis

Envío estándar gratuito en todos los pedidos inferiores a 1 kg.

Devoluciones sin preocupaciones

Aprende más.
Oxygen Sensor 65L-8592A-01 – Fits Yamaha 150–250HP V6 EFI

Oxygen Sensor 65L-8592A-01 – Fits Yamaha 150–250HP V6 EFI

$272.99

How to Match This Part

This aftermarket oxygen sensor replaces Yamaha 65L-8592A-01 (catalog form 65L-8592A-01-00). It threads into the exhaust on selected Yamaha V6 two-stroke HPDI and EFI outboards from 150 to 250 HP and reports exhaust oxygen so the ECU can trim fuel. This unit is new production, not a remanufactured core.

Match this part in this order:
1. OEM number on the removed sensor or in your parts catalog (65L-8592A-01 / 65L-8592A-01-00, 65L-8592A-00 / 65L-8592A-00-00, or 68F-8592A-00 / 68F-8592A-00-00)
2. Model code and year in the table below
3. Physical form — hex body, slotted tip, integral lead with an inline cylindrical module, and a two-piece plug

This is not Yamaha 67H-8592A (the two 2-pin-connector sensor used on DX/LX/SX/VX 150–200). If your original uses two small 2-pin plugs and no inline module, order the 67H listing instead.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. Yamaha catalogs these sensors with a trailing -00 suffix.

Type Brand Part Number Notes
OEM Yamaha Outboard 65L-8592A-01 Primary reference; also listed as 65L-8592A-01-00
OEM Yamaha Outboard 65L-8592A-00 Superseded by 65L-8592A-01; also listed as 65L-8592A-00-00
OEM Yamaha Outboard 68F-8592A-00 Equivalent Yamaha number; also listed as 68F-8592A-00-00
Aftermarket Sierra 18-7656 Direct aftermarket replacement

Part numbers are listed for identification only. This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Yamaha component.

Compatible Engine Models

Confirm your engine model and year in the table below. For Yamaha owners: Yamaha Serial Number Guide and Yamaha Parts Diagrams. On Yamaha outboards the identification plate is on the port-side transom clamp bracket.

Engine Model HP Years Notes
LZ150 150 2000–2005 V6 2-stroke HPDI
VZ150 150 2000–2014 V6 2-stroke HPDI
Z150 150 2000–2005 V6 2-stroke HPDI
VZ175 175 2001–2012 V6 2-stroke HPDI
Z175 175 2001–2005 V6 2-stroke HPDI
LZ200 200 2000–2012 V6 2-stroke HPDI
V200 200 1998–1999 V6 2-stroke EFI
VX200 200 2000–2005 V6 2-stroke EFI
VZ200 200 2001–2004 V6 2-stroke HPDI
Z200 200 2000–2012 V6 2-stroke HPDI
L225 225 1997–1999 V6 2-stroke EFI
LX225 225 2000–2003 V6 2-stroke EFI
S225 225 1997–1999 V6 2-stroke EFI
SX225 225 2000–2003 V6 2-stroke EFI
V225 225 1998–1999 V6 2-stroke EFI
VX225 225 1998–2005 V6 2-stroke EFI
L250 250 1997–1999 V6 2-stroke EFI
LX250 250 2000–2003 V6 2-stroke EFI
S250 250 1997–1999 V6 2-stroke EFI
SX250 250 2000–2003 V6 2-stroke EFI
VX250 250 2002–2004 V6 2-stroke EFI

Do not use this sensor for DX150, LX150, SX150, VX150, LX200, or SX200 applications that call for 67H-8592A-00.

Technical Specifications

Specification Value
Part type Oxygen (O2 / lambda) sensor for EFI / HPDI exhaust
Primary OEM number 65L-8592A-01
Mounting Threaded into the exhaust housing
Electrical connection Integral lead with inline module and two-piece plug
Visible form Hex body, slotted/louvered tip shield
Condition New production — not remanufactured

Installation Guide

1

Allow the engine and exhaust housing to cool fully. Disconnect the battery negative cable before unplugging the sensor lead.

2

Note the routing of the two-piece plug and inline module, then unplug the connector. Unscrew the old sensor from the exhaust housing with an oxygen-sensor socket on the hex — do not pull on the lead or crush the inline module.

3

Confirm the OEM number and the inline-module / two-piece-plug layout match this 65L-8592A-01 assembly. Thread the new sensor in by hand, then tighten snugly on the hex. Follow the Yamaha service manual for your model for tightening and thread treatment.

4

Reconnect the two-piece plug until it locks, restore the battery, start the engine, and confirm there is no exhaust leak at the bung and that the EFI/HPDI system runs without an oxygen-sensor fault.

Note: Professional installation is recommended to ensure safety and optimal performance.

Troubleshooting & FAQ

Is this an OEM or aftermarket part?+

This is an aftermarket JLM Marine replacement matched to Yamaha 65L-8592A-01. It is not a genuine Yamaha part.

Will this replace 67H-8592A-00 on my DX/SX 150–200?+

No. 67H-8592A is a different Yamaha oxygen-sensor family with two 2-pin connectors and no inline module. Use this 65L/68F sensor only when your catalog or removed part shows 65L-8592A or 68F-8592A.

Is 68F-8592A-00 the same sensor?+

Yes — 68F-8592A-00 is a Yamaha equivalent number for this assembly. 65L-8592A-00 is the earlier 65L number superseded by 65L-8592A-01.

Is this a remanufactured sensor?+

No. This listing is new production, not a rebuilt or remanufactured core.

Why Choose JLM MARINE?

  • Precision Fit: Form and connector layout matched to Yamaha 65L-8592A-01 oxygen sensor applications.
  • Quality Control: Each batch is inspected for dimensional consistency and workmanship.
  • Direct from Manufacturer: Aftermarket marine parts engineered for reliable EFI and HPDI exhaust sensing.

Podemos enviar a prácticamente cualquier dirección del mundo con envío gratuito disponible para la mayoría de las regiones.

Para nuestros clientes típicos de EE. UU. y Canadá , nuestros plazos de envío son los siguientes:

  • Amazon FBA : los pedidos se entregarán dentro de 1-5 días hábiles después de realizar el pedido (durante ciertos períodos especiales como promociones importantes, Navidad, etc., el tiempo de entrega de Amazon FBA puede verse afectado).
  • Envío al almacén de EE. UU .: los pedidos se entregarán dentro de los 7 días posteriores a la realización del pedido.
  • Envío al almacén de China : los pedidos se entregarán aproximadamente 12 días después de realizar el pedido.

Al realizar un pedido, estimaremos las fechas de envío y entrega según la disponibilidad de sus artículos y las opciones de envío que elija. Dependiendo del proveedor de envío que elija, las fechas de envío estimadas podrían aparecer en la página de presupuestos de envío.

Tenga en cuenta también que las tarifas de envío de muchos de los artículos que vendemos se basan en el peso. Puede consultar el peso de cada artículo en su página de detalles. Para reflejar las políticas de las empresas de envío que utilizamos, todos los pesos se redondearán a la libra superior.

Fundada en 2002, JLM Marine se ha consolidado como un fabricante dedicado de piezas marinas de alta calidad, con sede en China. Nuestro compromiso con la excelencia en la fabricación nos ha ganado la confianza de las principales marcas marinas a nivel mundial.

Como proveedor directo, evitamos intermediarios, lo que nos permite ofrecer precios competitivos sin comprometer la calidad. Este enfoque no solo promueve la rentabilidad, sino que también garantiza que nuestros clientes reciban el mejor valor directamente del proveedor.

Estamos entusiasmados de ampliar nuestro alcance a través de canales minoristas, llevando nuestra experiencia y compromiso con la calidad directamente a los propietarios de embarcaciones y entusiastas de todo el mundo.

Parts Finder

Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN. Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).

Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.

Productos relacionados

Productos vistos recientemente