Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
Couldn't load pickup availability
Envío estándar gratuito en todos los pedidos inferiores a 1 kg.
Puede devolver la mayoría de los artículos nuevos y sin abrir dentro de los 30 días posteriores a la entrega para obtener un reembolso completo. También cubriremos los gastos de envío si la devolución se debe a un error nuestro (por ejemplo, si recibió un artículo incorrecto o defectuoso).
Recibirá su reembolso en un plazo de cuatro semanas tras entregar su paquete al transportista. Sin embargo, en muchos casos, el reembolso se recibirá antes. Este plazo incluye el tiempo de tránsito que tardamos en recibir su devolución (de 5 a 10 días hábiles), el tiempo que tardamos en procesarla una vez recibida (de 3 a 5 días hábiles) y el tiempo que tarda su banco en procesar nuestra solicitud de reembolso (de 5 a 10 días hábiles).
Si necesita devolver un artículo, simplemente inicie sesión en su cuenta, consulte el pedido mediante el enlace "Completar pedidos" en el menú Mi cuenta y haga clic en el botón "Devolver artículo(s). Le notificaremos su reembolso por correo electrónico una vez que hayamos recibido y procesado la devolución.
This aftermarket oil pressure alarm switch replaces MerCruiser / Mercury 84-817219. Mercury later superseded this number through F700602, F708940, and 87-817169 to the current 87-805605A1 switch assembly. It signals the low oil pressure audio warning system on MerCruiser sterndrive and inboard engines.
Match this part in this order:
1. OEM number on the removed switch or in your parts catalog — 84-817219, F700602, F708940, 87-817169, or superseding 87-805605A1
2. Engine family — MerCruiser sterndrive or inboard calling for this oil-pressure alarm switch
3. Thread and terminal — 1/8-27 male pipe thread with a single 10-32 stud terminal
This listing is keyed to legacy number 84-817219. Confirm the OEM number and that you need an alarm switch (not a variable-resistance oil-pressure gauge sender) before ordering. See the product images to compare physical form once media are uploaded.
Use this table to confirm equivalent MerCruiser numbers in the 84-817219 supersession chain and a common aftermarket cross.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| Primary OEM Reference | Mercury / MerCruiser | 84-817219 | Legacy oil pressure alarm switch number |
| OEM supersession | Mercury / MerCruiser | F700602 | Next number after 84-817219 |
| OEM supersession | Mercury / MerCruiser | F708940 | Later catalogue number in the same chain |
| OEM supersession | Mercury / MerCruiser | 87-817169 | Oil pressure alarm switch; superseded by 87-805605A1 |
| OEM supersession | Mercury / MerCruiser / Quicksilver | 87-805605A1 | Current superseding switch assembly number (also 805605A1) |
| Aftermarket | Sierra | OP22900 | Aftermarket cross for superseding Mercury 87-805605A1 |
Part numbers are listed for identification only. This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Mercury or MerCruiser component.
Confirm your engine model and serial number before ordering. On MerCruiser sterndrive and inboard engines, the identification plate and serial number are on the engine itself — typically on the cylinder block or flame-arrestor cover — not on an outboard transom bracket. Cross-check with the Mercury Parts Diagrams for your MerCruiser engine group.
This switch serves the low oil pressure audio warning circuit. It is not the variable-resistance sender that drives an oil pressure gauge.
| Brand | Application | Notes |
|---|---|---|
| MerCruiser | Sterndrive engines calling for 84-817219 or its Mercury supersessions | Audio warning system signal |
| MerCruiser | Inboard engines calling for 84-817219 or its Mercury supersessions | Audio warning system signal |
Important: Verify the OEM number on your removed switch or parts catalog. Engines that use a different oil-pressure switch or a gauge sender only should not use this listing.
| Specification | Value |
|---|---|
| Part type | Low oil pressure switch (audio warning) |
| Primary OEM number | 84-817219 |
| Current Mercury supersession | 87-805605A1 (805605A1) |
| Thread size | 1/8-27 male pipe thread |
| Terminal type | 10-32 threaded stud, single terminal |
| Function | Signals the engine audio warning system on low oil pressure |
Allow the engine to cool fully. Disconnect the battery negative cable before working on the warning circuit.
Label and remove the warning-system wire from the old switch stud. Unscrew the old switch and compare its thread and terminal to this 1/8-27 / 10-32 unit. Do not force a mismatched thread.
Thread the new switch in by hand, then tighten snugly with the correct wrench on the body hex — do not over-torque or crush the insulator.
Reconnect the warning wire under the 10-32 stud nut. Reconnect the battery, start the engine, and confirm the alarm clears as oil pressure builds and that there are no oil leaks at the port.
Note: If you are unsure about warning-system wiring or oil-gallery location, have a marine technician complete the install.
This is an aftermarket JLM Marine replacement matched to MerCruiser 84-817219 and its Mercury supersession path. It is not a genuine Mercury or MerCruiser part.
Mercury superseded 84-817219 through later catalogue numbers to the current 87-805605A1 switch assembly. This listing is identified by the legacy 84-817219 reference; confirm your catalog number before ordering.
No. This is an on/off alarm switch for the audio warning circuit, not a variable-resistance gauge sender. Engines that use both a gauge sender and an alarm switch need the correct switch for the alarm circuit.
Only if the port is 1/8-27 male pipe thread and the wiring uses a single 10-32 stud. Compare the removed switch before ordering.
Podemos enviar a prácticamente cualquier dirección del mundo con envío gratuito disponible para la mayoría de las regiones.
Para nuestros clientes típicos de EE. UU. y Canadá , nuestros plazos de envío son los siguientes:
Al realizar un pedido, estimaremos las fechas de envío y entrega según la disponibilidad de sus artículos y las opciones de envío que elija. Dependiendo del proveedor de envío que elija, las fechas de envío estimadas podrían aparecer en la página de presupuestos de envío.
Tenga en cuenta también que las tarifas de envío de muchos de los artículos que vendemos se basan en el peso. Puede consultar el peso de cada artículo en su página de detalles. Para reflejar las políticas de las empresas de envío que utilizamos, todos los pesos se redondearán a la libra superior.
Fundada en 2002, JLM Marine se ha consolidado como un fabricante dedicado de piezas marinas de alta calidad, con sede en China. Nuestro compromiso con la excelencia en la fabricación nos ha ganado la confianza de las principales marcas marinas a nivel mundial.
Como proveedor directo, evitamos intermediarios, lo que nos permite ofrecer precios competitivos sin comprometer la calidad. Este enfoque no solo promueve la rentabilidad, sino que también garantiza que nuestros clientes reciban el mejor valor directamente del proveedor.
Estamos entusiasmados de ampliar nuestro alcance a través de canales minoristas, llevando nuestra experiencia y compromiso con la calidad directamente a los propietarios de embarcaciones y entusiastas de todo el mundo.
Thanks for subscribing!
This email has been registered!