Mercury 9.9hp Outboard Motor Decals – Fits Mercury 2-Stroke & 4-Stroke 1999-2006 (Replaces 12836A00, 37-12836A96, 37-12836A94)

Mercury 9.9hp Outboard Motor Decals – Fits 2-Stroke & 4-Stroke 1999-2006

Restore your Mercury 9.9hp outboard motor with this premium reproduction decal set, designed to bring back your engine's original, factory appearance. This comprehensive kit is engineered for superior durability in harsh marine environments, fitting both 2-stroke and 4-stroke Mercury 9.9hp models manufactured between 1999 and 2006.

This decal set functions as both a cosmetic enhancement and a protective barrier, helping to maintain your outboard motor's resale value while ensuring clear identification of engine specifications. It directly replaces Mercury OEM part numbers 12836A00, 37-12836A96, and 37-12836A94, offering an authentic look at a fraction of the cost.

• Complete 7-Piece Set: Includes all necessary side, rear, and identifying decals for a full restoration.
• Marine-Grade Durability: Manufactured from high-quality PVC foil with UV-resistant inks and a protective laminate coating to resist water, oil, and sun damage.
• Easy Installation: Features a self-adhesive backing and pre-cut, precision-fit designs for straightforward application.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Mercury M 3D Resin Domed Decal (Premium raised logo)
• 1 x 9.9 HP Rear Decal
• 1 x Mercury Rear Decal
• 1 x Mercury Port Side Decal (Replaces 37-859267-5)
• 1 x Four-Stroke Port Side Decal
• 1 x SailMaster Port Side Decal
• 1 x Mercury Starboard Side Decal (Replaces 37-859267-6)

Installation Guide

1. Clean aThoroughly: Prepare the cowling by cleaning the surface with a marine-grade degreaser to remove all salt, wax, oil, and oxidation.
2. Ensure Ideal Conditions: Make sure the surface is completely dry and at room temperature (65-75°F / 18-24°C) for the best adhesive bond.
3. Position Carefully: Align each decal on the cowling before removing the protective backing paper. The permanent adhesive bonds immediately and is not repositionable.
4. Apply Firm Pressure: Use a plastic squeegee or soft, lint-free cloth to apply the decal, working from the center outward to smooth out any air bubbles.
5. Address Curves: For complex curves, a heat gun or hair dryer on a low setting can be used to gently warm the vinyl, making it more pliable.
6. Allow to Cure: Let the decals cure for at least 24 hours before exposing the engine to water or heavy use to ensure the adhesive sets properly.

Troubleshooting & FAQ

How do I confirm this fits my engine?
The most reliable method is to check your engine's serial number, which is usually on the engine bracket or transom clamp. Cross-reference this number with the compatible serial number ranges listed in the "Compatible Engine Models" section (e.g., 0T980000–0T999999 for 2-strokes).

What is the difference between this aftermarket set and the OEM version?
Our decals are manufactured to meet or exceed OEM standards using high-grade, UV-resistant PVC and marine-grade adhesives. They offer a comparable look and durability to original Mercury decals but at a more competitive price point.

How should I care for the decals after installation?
Maintenance is minimal. Simply wash the decals with mild soap and water during regular boat cleaning. Avoid using abrasive cleaners or high-pressure washers, as these can damage the protective laminate and compromise the adhesive.

What causes air bubbles during installation, and how can I fix them?
Air bubbles typically result from trapping air during application. Most can be prevented by using a squeegee and working from the center outwards. If a bubble persists, you can puncture it with a fine needle and smooth the area down.

How often should these decals be replaced?
With proper care, these decals have an expected service life of 5-7 years in typical marine environments. Factors like intense, prolonged sun exposure and commercial use may shorten this lifespan. Inspect annually for any edge lifting or fading.

This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 2-year manufacturer warranty against manufacturing defects like fading or peeling under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.