5007335 Fuel Filter Assembly for Johnson Evinrude OMC Mariner | JLM Marine

Fuel Filter Assembly for Johnson Evinrude OMC Mariner Outboard Motors

This fuel filter assembly is designed to fit a wide range of Johnson, Evinrude, OMC, and Mariner outboard engines, including E-Tec models ranging from 40 HP to 200 HP. Engineered to ensure clean fuel delivery and optimal engine performance, this assembly provides reliable filtration for your marine power system.

Direct Replacements: This assembly replaces OEM part numbers 5005266, 5007326, 0768720, and 5007335, as well as aftermarket Sierra part number 18-7722, ensuring broad compatibility across multiple model years and engine configurations.

• Complete fuel filter assembly ready for installation
• Compatible with E-Tec 40, 50, 60, 75, 90, 115, 150, 175, and 200DPL engines
• Direct-fit replacement for multiple OEM and aftermarket part numbers

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Johnson/Evinrude owners, here's a guide to help you identify your engine's serial/model: Johnson/Evinrude Serial Number Guide.

Technical Specifications

Package Contents

Your order includes the following:

• 1 × Fuel Filter Assembly

Installation Guide

1. Disconnect the battery and ensure the engine is completely off before beginning work. Allow the engine to cool if it has been running recently.
2. Locate the existing fuel filter assembly on your outboard engine, typically found along the fuel line between the fuel tank and the engine. Reference your engine's service manual if needed.
3. Place a rag or container beneath the filter to catch any residual fuel that may spill during removal.
4. Disconnect the fuel lines from both the inlet and outlet sides of the old filter assembly. Note the flow direction indicated by arrows on the filter housing.
5. Remove the old fuel filter assembly from its mounting bracket or position.
6. Install the new fuel filter assembly in the same orientation, ensuring the fuel flow direction matches the arrow markings on the housing.
7. Reconnect the fuel lines securely to the inlet and outlet fittings, ensuring all clamps are properly tightened to prevent leaks.
8. Check all connections for tightness and proper seating.
9. Reconnect the battery and prime the fuel system according to your engine's procedure (usually by squeezing the primer bulb until firm).
10. Start the engine and inspect for any fuel leaks around the filter connections. Allow the engine to run for a few minutes.
11. Monitor performance during initial operation to ensure proper fuel flow and engine function.
12. Dispose of the old filter properly according to local environmental regulations.

Troubleshooting & FAQ

Q: How do I confirm this fuel filter fits my specific engine model?
A: Cross-reference your engine's model and horsepower with the compatibility table above. Additionally, verify that your current filter's OEM part number matches one of the listed replacements (5005266, 5007326, 0768720, or 5007335). If you're unsure, consult your engine's parts diagram or contact our support team.

Q: How often should I replace the fuel filter on my outboard?
A: Most manufacturers recommend replacing the fuel filter annually or every 100 hours of operation, whichever comes first. If you notice engine performance issues, rough idling, or difficulty starting, inspect and replace the filter sooner as it may be clogged.

Q: What are the signs that my fuel filter needs replacement?
A: Common symptoms include hard starting, engine hesitation or sputtering under load, loss of power at high RPM, rough idling, or the engine dying unexpectedly. Visual inspection may reveal a discolored or debris-filled filter element.

Q: Can I clean and reuse this fuel filter instead of replacing it?
A: No, this is a disposable filter assembly designed for one-time use. Attempting to clean and reuse it can compromise filtration effectiveness and potentially allow contaminants to reach your engine's fuel system, causing damage.

Q: Is this an OEM part or aftermarket replacement?
A: This listing is an aftermarket replacement part manufactured to OEM specifications using quality materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.