1395-8236354 Carburetor Repair Kit for Mercury Mariner | JLM Marine

Carburetor Repair Kit for Mercury Mariner Outboards – 1395-8236354

This comprehensive carburetor repair seal kit is designed to fit a wide range of Mercury Mariner outboard engines from 30 HP to 125 HP, covering both 2-cylinder, 3-cylinder, and 4-cylinder configurations. Compatible with standard and JET models, this kit provides essential seals and gaskets to restore carburetor performance across multiple WME carburetor series.

This aftermarket kit directly replaces OEM part number 1395-8236354, offering reliable performance for Mercury Mariner models spanning 30, 40, 45, 50, 55, 60, 75, 80, 90, 100, 115, and 125 horsepower engines. It covers WME carburetor models 1 through 35, ensuring broad compatibility for your rebuild needs.

• Fits multiple Mercury Mariner HP ratings and cylinder configurations (2-cyl, 3-cyl, 4-cyl)
• Compatible with both standard and JET outboard models
• Covers WME carburetor series 1–35 for extensive application

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here's a guide to help you identify your engine's serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This carburetor repair kit includes all necessary seals and gaskets required to rebuild carburetors on the following Mercury Mariner models:

• Mercury Mariner 30 HP 2 Cyl and 30 JET 3 CYL Marine Outboard Carburetor Repair Seal Kit
• Mercury Mariner 40 HP 2 & 3 Cyl 40 JET Outboard Carburetor Repair Seal Kit
• Mercury Mariner 45 HP JET Marine Outboard Carburetor Repair Seal Kit
• Mercury Mariner 50 55 60 75 HP 3 Cyl Marine Outboard Carburetor Repair Seal Kit
• Mercury Mariner 60 80 HP JET Marine Outboard Carburetor Repair Seal Kit
• Mercury Mariner 90 HP 3 Cyl Marine Outboard Carburetor Repair Seal Kit
• Mercury Mariner 100 115 125 HP 4 Cyl Marine Outboard Carburetor Repair Seal Kit
• Compatible with WME Carburetors: 1, 1A, 1B, 4, 5, 6, 6A, 7, 7B, 8, 9, 10, 10A, 11, 14, 15, 15A, 17, 18
• Compatible with WME Carburetors: 20, 20A, 21, 21A, 22, 22B, 23, 24, 26, 27, 28, 32, 32B, 33, 34, 35

Installation Guide

1. Prepare the workspace: Ensure the engine is off and cooled down. Gather necessary tools including screwdrivers, wrenches, and a clean work surface.
2. Remove the carburetor: Disconnect the fuel line and throttle linkage, then unbolt the carburetor from the engine. Handle carefully to avoid damage to mounting surfaces.
3. Disassemble the carburetor: Remove the top cover, float bowl, jets, and needle valve assembly. Keep track of all components and their orientation for reassembly.
4. Remove old seals and gaskets: Carefully scrape away all old gasket material from mating surfaces using a gasket scraper. Avoid scratching or gouging the metal surfaces.
5. Clean all components: Use carburetor cleaner to thoroughly clean all passages, jets, and internal components. Blow out passages with compressed air to ensure they are clear.
6. Install new seals and gaskets: Position the new gaskets and seals from this kit onto their respective locations. Ensure proper alignment before tightening any fasteners.
7. Reassemble the carburetor: Install jets, needles, float assembly, and bowl in reverse order of disassembly. Tighten all screws evenly to avoid warping.
8. Reinstall the carburetor: Mount the rebuilt carburetor back onto the engine with a new base gasket from the kit. Reconnect fuel line and throttle linkage securely.
9. Prime and test: Prime the fuel system by squeezing the primer bulb until firm. Start the engine and check for fuel leaks around all gasket surfaces.
10. Adjust idle and mixture: Allow the engine to warm up, then adjust idle speed and fuel mixture screws according to manufacturer specifications. Fine-tune for smooth operation.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my specific Mercury carburetor model?
A: Check the WME model number stamped on your carburetor body and cross-reference it with the compatible models listed (WME 1–35 series). You can also verify your engine's HP rating and cylinder count against the fitment table above.

Q: What are the signs that my carburetor seals need replacement?
A: Common symptoms include fuel leaks around the carburetor, rough idle, difficulty starting, inconsistent engine performance, and fuel odor. If gaskets appear cracked, hardened, or compressed, replacement is necessary.

Q: How often should I rebuild my carburetor with a new seal kit?
A: Carburetor seals typically require replacement every 3–5 years depending on usage and fuel quality. If you notice performance issues or visible deterioration of gaskets during maintenance, rebuild immediately regardless of time interval.

Q: Can I reuse any of the old gaskets during installation?
A: No, always replace all seals and gaskets during a carburetor rebuild. Reusing compressed or aged gaskets will result in fuel leaks and poor performance, negating the benefits of your rebuild effort.

Q: Will this kit work on both standard and JET model outboards?
A: Yes, this repair kit is designed to fit both standard Mercury Mariner outboards and JET models within the specified HP range. Verify your specific model against the compatibility table to ensure proper fitment.

Q: What's the difference between OEM and aftermarket carburetor kits?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.