69M-14301-10 Carburetor Assembly for Yamaha Parsun F2.5 F2.6 | JLM Marine

69M-14301-10 Carburetor Assembly for Yamaha Parsun F2.5 F2.6 | JLM Marine

This carburetor assembly is engineered for Yamaha F2.5 and F2.6 outboard engines (2003 and later), as well as Parsun F2.6 four-stroke motors. It delivers reliable fuel delivery and throttle response for small outboard applications, making it a direct fit for 2.5HP and 2.6HP models.

This replacement matches OEM specifications for 69M-14301-10, 69M-14301-11, 69M-14301-12, 69M-14301-21, 69M-14301-22, and Sierra 18-34604. It also fits Parsun part numbers PAF2604000200 / PAF2.6-04000200 intake and carburetor assemblies.

• Complete carburetor assembly ready for installation
• Compatible with Yamaha 4-stroke 2.5HP engines from 2006 and up
• Fits Parsun F2.6 intake and carburetor systems

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 × Carburetor Assembly (Complete)

Installation Guide

1. Disconnect the fuel line from the existing carburetor and remove the throttle linkage. Ensure the engine is cool and all residual fuel is drained.
2. Remove the mounting nuts or bolts securing the old carburetor to the intake manifold. Carefully lift the old unit away.
3. Inspect the intake gasket; replace if cracked or worn to prevent air leaks.
4. Position the new carburetor onto the intake manifold, aligning all mounting holes. Install gasket if required.
5. Hand-tighten the mounting fasteners, then torque evenly in a cross pattern to manufacturer specifications.
6. Reconnect the throttle cable and any choke linkage, ensuring smooth operation through the full range.
7. Attach the fuel line securely to the carburetor inlet, using a new clamp if necessary.
8. Prime the fuel system by squeezing the primer bulb until firm. Check for leaks around all connections.
9. Start the engine and allow it to warm up to normal operating temperature. Listen for smooth idle.
10. Adjust idle speed and mixture screws per the service manual if engine runs rough or stalls.
11. Verify throttle response by advancing and retarding the throttle lever several times.
12. Perform a final inspection of all fasteners, linkages, and fuel connections before operation.

Troubleshooting & FAQ

How do I confirm this carburetor fits my Yamaha or Parsun engine?
Cross-reference your engine model and year with the compatibility table above, and verify that your original part number matches one of the OEM references listed (69M-14301-10, 69M-14301-11, etc.).

What are the signs that my carburetor needs replacement?
Common symptoms include rough or unstable idle, difficulty starting, stalling under load, excessive fuel consumption, or black smoke from the exhaust indicating an overly rich mixture.

How often should I replace or service my carburetor?
Carburetors typically last many seasons if properly maintained. Clean the jets and float bowl annually, and replace the unit if internal wear, corrosion, or damage prevents proper adjustment.

Can I use this carburetor on a 2-stroke engine?
No, this assembly is designed exclusively for Yamaha and Parsun 4-stroke models (F2.5 and F2.6). Do not install on 2-stroke engines as fuel delivery and oiling requirements differ.

Will this aftermarket carburetor perform the same as the OEM part?
Yes, this replacement is built to OEM specifications and delivers equivalent fuel metering and throttle response. Proper installation and adjustment are key to matching OEM performance.

Is this an OEM part or an aftermarket replacement?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.