Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
Couldn't load pickup availability
Envío estándar gratuito en todos los pedidos inferiores a 1 kg.
Puede devolver la mayoría de los artículos nuevos y sin abrir dentro de los 30 días posteriores a la entrega para obtener un reembolso completo. También cubriremos los gastos de envío si la devolución se debe a un error nuestro (por ejemplo, si recibió un artículo incorrecto o defectuoso).
Recibirá su reembolso en un plazo de cuatro semanas tras entregar su paquete al transportista. Sin embargo, en muchos casos, el reembolso se recibirá antes. Este plazo incluye el tiempo de tránsito que tardamos en recibir su devolución (de 5 a 10 días hábiles), el tiempo que tardamos en procesarla una vez recibida (de 3 a 5 días hábiles) y el tiempo que tarda su banco en procesar nuestra solicitud de reembolso (de 5 a 10 días hábiles).
Si necesita devolver un artículo, simplemente inicie sesión en su cuenta, consulte el pedido mediante el enlace "Completar pedidos" en el menú Mi cuenta y haga clic en el botón "Devolver artículo(s). Le notificaremos su reembolso por correo electrónico una vez que hayamos recibido y procesado la devolución.
This aftermarket Power Trim control unit replaces Volvo Penta 3855650. It is the helm panel switch used to operate sterndrive power trim and tilt — raising, lowering, and trimming the outdrive from the control station. It is not an engine sensor, and it is not a toggle-style trim switch on a control lever.
Match this part in this order:
1. OEM number on the removed control panel or in your parts catalog — 3855650, or superseded numbers 873617, 853846, or 3855560
2. Outdrive model stamped on the drive identification plate — DP, DPX, SP, or SX family listed below
3. Physical form — compare connector style and panel layout to the product images once media are uploaded
Confirm the OEM number and your sterndrive model designation before ordering. Do not match by engine displacement or boat year alone.
Use this table to confirm Volvo Penta numbers in the 3855650 Power Trim control unit path. Note that 3855560 and 3855650 are different numbers — verify which appears on your removed panel.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| Primary OEM Reference | Volvo Penta | 3855650 | Current Power Trim control unit |
| OEM supersession | Volvo Penta | 873617 | Earlier control panel; superseded by 3855650 |
| OEM supersession | Volvo Penta | 853846 | Earlier number in the same supersession path |
| OEM supersession | Volvo Penta | 3855560 | Related superseded / equivalent panel number (not the same digits as 3855650) |
Part numbers are listed for identification only. This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Volvo Penta component.
Fitment is by sterndrive model designation, not by engine displacement or boat production year. Confirm the model stamped on your drive plate and the OEM number on the removed panel. Cross-check with the Parts Diagrams for your drive group when available.
| Brand | Drive / Application | Notes |
|---|---|---|
| Volvo Penta | DP-D1, DP-C, DP-E, DP-G | Duoprop sterndrives calling for 3855650 path |
| Volvo Penta | DPX | DPX series sterndrive power trim applications |
| Volvo Penta | SP-C1, SP-E | Single-propeller sterndrives |
| Volvo Penta | SX | SX series sterndrive power trim applications |
Important: Engine HP, displacement, and boat year alone do not confirm fitment. Always verify the drive model and the OEM number on the removed control panel.
| Specification | Value |
|---|---|
| Part type | Power Trim control unit (helm trim & tilt control panel) |
| Primary OEM number | 3855650 |
| Also replaces | 873617, 853846, 3855560 |
| System | Volvo Penta sterndrive power trim / tilt |
| Mounting | Helm / control-panel mount |
| Function | Operate drive trim angle and full tilt from the helm |
Disconnect the battery negative cable before working on trim or helm electrical circuits.
Locate the existing Power Trim control panel at the helm. Note the mounting fasteners and the wiring connector orientation, then carefully unplug the harness.
Compare the removed panel’s OEM number and connector style to this 3855650 replacement and to the product images. Do not force a mismatched connector.
Install the new control unit in the same panel opening, reconnect the harness fully seated, restore battery power, and test trim-up, trim-down, and full tilt before returning the boat to service.
Note: If the harness plug, panel cutout, or button arrangement does not match, stop and re-check the OEM number. Have a marine technician complete the install when trim hydraulics or wiring are unfamiliar.
This is an aftermarket JLM Marine replacement matched to Volvo Penta 3855650 and its related supersession numbers. It is not a genuine Volvo Penta part.
3855650 is the current Power Trim control unit number. 873617 and 853846 are earlier numbers in the same replacement path. 3855560 is a related superseded / equivalent panel number with different digits — confirm which number is stamped on your removed unit before ordering.
No. Match by the sterndrive model (DP, DPX, SP, or SX family listed above) and by the OEM number on the removed control panel.
No. This listing is a helm Power Trim control unit for Volvo Penta sterndrive trim and tilt. Sensors and pressure switches are different parts.
Podemos enviar a prácticamente cualquier dirección del mundo con envío gratuito disponible para la mayoría de las regiones.
Para nuestros clientes típicos de EE. UU. y Canadá , nuestros plazos de envío son los siguientes:
Al realizar un pedido, estimaremos las fechas de envío y entrega según la disponibilidad de sus artículos y las opciones de envío que elija. Dependiendo del proveedor de envío que elija, las fechas de envío estimadas podrían aparecer en la página de presupuestos de envío.
Tenga en cuenta también que las tarifas de envío de muchos de los artículos que vendemos se basan en el peso. Puede consultar el peso de cada artículo en su página de detalles. Para reflejar las políticas de las empresas de envío que utilizamos, todos los pesos se redondearán a la libra superior.
Fundada en 2002, JLM Marine se ha consolidado como un fabricante dedicado de piezas marinas de alta calidad, con sede en China. Nuestro compromiso con la excelencia en la fabricación nos ha ganado la confianza de las principales marcas marinas a nivel mundial.
Como proveedor directo, evitamos intermediarios, lo que nos permite ofrecer precios competitivos sin comprometer la calidad. Este enfoque no solo promueve la rentabilidad, sino que también garantiza que nuestros clientes reciban el mejor valor directamente del proveedor.
Estamos entusiasmados de ampliar nuestro alcance a través de canales minoristas, llevando nuestra experiencia y compromiso con la calidad directamente a los propietarios de embarcaciones y entusiastas de todo el mundo.
Thanks for subscribing!
This email has been registered!