Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
30-803097T1 Transom Seal Kit for MerCruiser Alpha One Gen I | JLM Marine
- $60.77
- $60.77
- Unit price
- per
Couldn't load pickup availability
Envío gratis
Envío estándar gratuito en todos los pedidos inferiores a 1 kg.
Devoluciones sin preocupaciones
Aprende más.
Part Number Cross-Reference
- Mercury / MerCruiser OEM: 30-803097T1, 30-803097A2, 30803097T1, 803097T1
- Sierra Marine: 18-2601, 18-2601-1, 18-8213
- GLM: 21950
- SEI Marine: 9A-108
- Mallory Marine: 9-72902, 9-72904
- Engineered Marine Products (EMP): 61-08397
- Pro Marine: 68397
- OBR Red Rhino: MR-902
- WSM: 576-210
Important Fitment Exclusions
- Does NOT fit MerCruiser Alpha One Gen II drives (1991 and newer, serial numbers 0D469859 and up). Gen II drives require kit 30-803099T1.
- Does NOT fit Bravo drives (I, II, III) or Blackhawk drives.
- Does NOT fit units configured with an exhaust tube instead of exhaust bellows (different kit required).
- Does NOT fit older models prior to 1983 (serial numbers below 6225577).
Tip: If your drive has a plastic U-joint shaft cover, if the upper and lower housings are fastened together with through bolts rather than studs, or if the trim cylinders are mounted with C-clips instead of nuts, it is likely a Gen II — this kit will not fit. Gen II drives are also physically larger with a different shift shaft and larger water pump.
Quick Fitment Check: This complete transom seal kit is commonly listed for MerCruiser R, MR, Alpha One Gen I, and Alpha One SS sterndrives (approx. 1983–1990, serial number 6225577 & up) equipped with exhaust bellows. Replaces OEM 30-803097T1 and Sierra 18-2601-1.
Compatibility Guide
Use this compatibility guide as a reference only. Compatibility may vary by engine model, drive type, and serial number. Always verify your drive serial number before ordering.
| Drive Family | Years (Approx.) | Serial Number Range | Notes |
|---|---|---|---|
| MerCruiser R / MR | 1983 – 1990 | 6225577 & Up | With exhaust bellows |
| MerCruiser Alpha One Gen I | 1983 – 1990 | 6225577 & Up | With exhaust bellows |
| MerCruiser Alpha One SS | 1986 – 1989 | 0A545004 & Up | With exhaust bellows |
What's Included & Specifications
Kit Contents
- 1 x U-Joint Bellows Assembly (replaces 60932A4)
- 1 x Exhaust Bellows (replaces 18654A1 / 32734A3)
- 1 x Shift Cable Bellows (replaces 74639 / 74639A2)
- 1 x Gimbal Bearing — Greasable (replaces 30-60794A4 / 30-60794A2)
- 1 x 3/4" Water Intake Hose (replaces 32-32461)
- 1 x 5/8" Water Intake Hose (replaces 32-41725-33)
- 1 x Transom Bell Housing Gasket Set (replaces 27-94996A1 / 27-94996T2)
- Stainless Steel Hose Clamps and Mounting O-Rings
Package contents may vary slightly; please confirm with product photos.
Specifications
- Drive Type: MerCruiser R, MR, Alpha One Gen I, Alpha One SS
- Exhaust Configuration: With Exhaust Bellows
- Bearing Type: Greasable (zerk fitting compatible)
- Material: Marine-Grade Rubber / Stainless Steel
- Hose Sizes: 3/4" and 5/8" included
- Weight: Approx. 5.4 lbs
- Condition: Brand New — Aftermarket
Product Overview
Transom bellows are the primary barrier keeping water out of your boat's hull and engine compartment. They naturally degrade from UV exposure, marine growth, heat cycling, and constant flexing during trim and steering operations. A cracked U-joint bellows is one of the most common — and most expensive — failures on MerCruiser sterndrives.
What happens if you don't replace it? Water enters through the compromised seal, rapidly corroding the gimbal bearing and U-joints. Left unchecked, this leads to catastrophic water intrusion. The cost of replacing rusted U-joints, a seized gimbal bearing, and repairing water damage can easily exceed $2,000–$3,000 in parts and labor.
Replacing the complete transom seal kit during routine maintenance (typically every 3–5 years, or sooner if you notice any cracking) is a fraction of the cost of emergency repairs. This comprehensive service kit includes all essential components for a complete transom rebuild, saving you time and multiple shipping costs.
Top Features / Key Benefits
- Marine-Grade Rubber Construction: Engineered to resist UV degradation, saltwater exposure, and heat cycling — helping prevent the costly water intrusion that destroys U-joints and engine compartments.
- Complete Service Kit: Includes all bellows, hoses, bearing, gaskets, and clamps — no need to source parts individually, saving you time and multiple shipping costs.
- Universal Hose Fitment: Includes both 5/8" and 3/4" water intake hoses to ensure proper fitment regardless of your specific engine configuration.
- Direct Replacement: Designed as a direct replacement for OEM part 30-803097T1 and listed aftermarket equivalents, suitable for routine marine maintenance.
- Greasable Gimbal Bearing: Allows routine lubrication via zerk fitting, extending bearing life and reducing long-term maintenance costs.
- Stainless Steel Hardware: All included hose clamps are stainless steel for corrosion resistance in saltwater environments.
Installation Notes
- Difficulty Level: Advanced — requires removing the outdrive unit and specialized tools. Typical installation time is 2–6 hours depending on experience.
- Required Tools: Bellows expansion tool (e.g., 91-45497A1), hinge pin tool, engine alignment tool, slide hammer kit (for gimbal bearing removal), and a 1/4" wobble extension with 1/4" or 5/16" socket.
- Pro Tip: Apply marine-grade bellows adhesive (like Quicksilver 92-86166Q1 or Sierra #18-9031) to the U-joint, shift cable, and exhaust bellows to prevent them from coming loose when the drive is tilted. Do NOT get adhesive on the teeth of the housing.
- Pro Tip: Ensure hose clamp screws are positioned correctly before tightening so they don't rub against the bellows when the drive is trimmed up.
- Recommended Co-Replacement: While the sterndrive is removed, consider replacing the lower shift cable, water pump impeller kit, trim limit switch, and trim sender to avoid repeating this labor-intensive job. Replacing all components simultaneously is highly recommended.
Frequently Asked Questions
What's the difference between the Gen I and Gen II transom seal kit?
The Gen I kit (30-803097T1) fits MerCruiser Alpha One drives manufactured approximately 1983–1990 with serial numbers 6225577 and up. The Gen II kit (30-803099T1) fits Alpha One Gen II drives from 1991 and newer (serial 0D469859 and up). The two are NOT interchangeable — the bellows dimensions, shift cable bellows design, and mounting points are different. If your drive has a plastic U-joint shaft cover, 6 transom assembly bolts instead of 4, or trim cylinders mounted with C-clips, it's likely a Gen II.
Does this kit include the exhaust bellows?
Yes. This is the complete kit with exhaust bellows included. It contains the U-joint bellows, exhaust bellows, shift cable bellows, gimbal bearing, both water intake hoses (5/8" and 3/4"), transom gasket set, and all necessary stainless steel clamps and O-rings.
How often should I replace my MerCruiser transom bellows?
Most marine mechanics recommend inspecting transom bellows every 2 years and replacing them every 3–5 years, or immediately if you notice any cracking, hardening, or signs of water intrusion. Boats stored in the water year-round or operated in saltwater may need more frequent replacement.
Can I install this transom seal kit myself, or do I need a mechanic?
This is an advanced DIY job that requires specialized tools (bellows expander, hinge pin tool, alignment tool, slide hammer) and familiarity with sterndrive removal. If you have mechanical experience and the proper tools, it's achievable in 4–6 hours. If you're unfamiliar with the process, we recommend hiring a certified marine mechanic — improper installation can lead to water leaks.
Why does this kit include two different water hoses?
The kit includes both a 5/8" and a 3/4" water intake hose because different engine and drive configurations use different hose sizes. You will only use the one that matches your current setup — check your existing hose diameter before installation.
Is the gimbal bearing in this kit greasable or sealed?
This kit includes a greasable gimbal bearing with a zerk fitting. This allows routine lubrication through the transom assembly's grease fitting, which extends bearing life significantly compared to sealed bearings that cannot be maintained.
Why Choose JLM MARINE?
- Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
- Fast Global Shipping: Free delivery worldwide in 5-15 days.
- Direct from Manufacturer: Competitive pricing without compromising quality.
Related JLM Marine Parts
- MerCruiser Alpha One Lower Shift Cables
- MerCruiser Alpha One Water Pump Impeller Kits
- Bellows Adhesive & Marine Lubricants
- Bellows Expansion Tools & Hinge Pin Tools
- All MerCruiser Alpha One Gen I Parts
Fitment Disclaimer: Compatibility may vary by engine model, drive type, and serial number. We strongly recommend verifying your engine/drive serial number against the OEM part numbers listed above before ordering. When in doubt, compare with your original part or consult your service manual.
Podemos enviar a prácticamente cualquier dirección del mundo con envío gratuito disponible para la mayoría de las regiones.
Para nuestros clientes típicos de EE. UU. y Canadá , nuestros plazos de envío son los siguientes:
- Amazon FBA : los pedidos se entregarán dentro de 1-5 días hábiles después de realizar el pedido (durante ciertos períodos especiales como promociones importantes, Navidad, etc., el tiempo de entrega de Amazon FBA puede verse afectado).
- Envío al almacén de EE. UU .: los pedidos se entregarán dentro de los 7 días posteriores a la realización del pedido.
- Envío al almacén de China : los pedidos se entregarán aproximadamente 12 días después de realizar el pedido.
Al realizar un pedido, estimaremos las fechas de envío y entrega según la disponibilidad de sus artículos y las opciones de envío que elija. Dependiendo del proveedor de envío que elija, las fechas de envío estimadas podrían aparecer en la página de presupuestos de envío.
Tenga en cuenta también que las tarifas de envío de muchos de los artículos que vendemos se basan en el peso. Puede consultar el peso de cada artículo en su página de detalles. Para reflejar las políticas de las empresas de envío que utilizamos, todos los pesos se redondearán a la libra superior.
Fundada en 2002, JLM Marine se ha consolidado como un fabricante dedicado de piezas marinas de alta calidad, con sede en China. Nuestro compromiso con la excelencia en la fabricación nos ha ganado la confianza de las principales marcas marinas a nivel mundial.
Como proveedor directo, evitamos intermediarios, lo que nos permite ofrecer precios competitivos sin comprometer la calidad. Este enfoque no solo promueve la rentabilidad, sino que también garantiza que nuestros clientes reciban el mejor valor directamente del proveedor.
Estamos entusiasmados de ampliar nuestro alcance a través de canales minoristas, llevando nuestra experiencia y compromiso con la calidad directamente a los propietarios de embarcaciones y entusiastas de todo el mundo.
Parts Finder
Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN.
Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
- Choosing a selection results in a full page refresh.