69J-82563-01 Trim & Tilt Switch for Yamaha F50LB F50LB2 T50LB F60JB F60LB T60LB F70LA F70LA2 F150JB F150LB F150LB2 F150XB F150XB2 LF150XB LF150XB2 F175LA F200LB F200XA F200XB2 LF200XA LF200XB VF225LA F225XA F250XA LF250XA | JLM Marine

69J-82563-01 Trim & Tilt Switch for Yamaha Outboards – Fits 50HP to 250HP 4-Stroke Models

This trim and tilt switch is designed to fit a wide range of Yamaha 4-stroke outboard engines from 50HP to 250HP, spanning model years 2015 through 2022. Compatible models include the F50LB, F50LB2, T50LB, F60JB, F60LB, T60LB, F70LA, F70LA2, F150JB, F150LB, F150LB2, F150XB, F150XB2, LF150XB, LF150XB2, F175LA, F200LB, F200XA, F200XB2, LF200XA, LF200XB, VF225LA, F225XA, F250XA, and LF250XA series.

This aftermarket replacement directly replaces Yamaha OEM part numbers 69J-82563-01-00, 69J-82563-00-00, and 704-82563-42-00, providing reliable trim and tilt control at the helm for enhanced boat handling and engine positioning.

• Direct replacement for multiple Yamaha OEM part numbers
• Designed for 4-stroke outboard engines
• Easy installation into existing electrical systems

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 × Trim & Tilt Switch (69J-82563-01)

Installation Guide

1. Disconnect the battery: Always disconnect the negative terminal from your boat's battery before beginning any electrical work to prevent short circuits or shocks.
2. Locate the existing trim/tilt switch: Find the switch on your engine's control handle or control box. It is typically secured with screws or clips.
3. Remove the old switch: Carefully unscrew or unclip the old switch housing and disconnect the wiring harness by pressing the release tab or pulling the connector apart.
4. Inspect the wiring: Check the wiring harness and connectors for corrosion, damage, or loose connections. Clean terminals if needed.
5. Connect the new switch: Align the wiring connector with the new switch and press firmly until it clicks into place. Ensure the connection is secure.
6. Mount the new switch: Position the new switch in the housing and secure it with the original screws or clips. Do not overtighten.
7. Reconnect the battery: Reattach the negative battery terminal and tighten the connection.
8. Test the switch operation: Turn the ignition key to the ON position (engine off) and press the trim/tilt switch up and down to verify proper motor response.
9. Perform a functional test: Start the engine and test the trim and tilt functions at idle and higher RPMs to ensure smooth operation under load.
10. Secure all components: Ensure all wiring is properly routed, free from pinch points, and that covers are reinstalled securely.

Troubleshooting & FAQ

How do I confirm this switch fits my Yamaha outboard?
Cross-reference your engine model, year, and horsepower with the compatibility table above. You can also verify the original part number on your existing switch or consult your Yamaha parts diagram using the link provided earlier.

What should I do if the trim/tilt doesn't respond after installing the new switch?
First, check that the wiring connector is fully seated and locked in place. Verify battery voltage and inspect fuses related to the trim/tilt system. If the motor still doesn't respond, test the trim/tilt motor and relay separately to rule out other component failures.

How often should I replace the trim and tilt switch?
Trim and tilt switches typically last several years under normal use. Replace the switch when you experience intermittent operation, no response when pressing buttons, corrosion on contacts, or physical damage to the switch housing.

Can I use this switch on both mechanical and hydraulic trim/tilt systems?
This switch is designed to control the electrical signal to the trim/tilt relay and motor. It works with both hydraulic and electric trim/tilt systems as long as your engine model is listed in the compatibility table.

What are common signs that my trim/tilt switch is failing?
Symptoms include no response when pressing the switch, only one direction working (up or down), delayed or intermittent operation, or a clicking sound from the relay without motor movement. These often indicate internal contact wear or moisture damage.

Is this an OEM part or an aftermarket replacement?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.