Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)
Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

Vendor: JLM Marine
Availability: In Stock
Product Type: Lower Unit Seal Kit
$19.99
$23.00
$19.99
Subtotal: $19.99

Envío gratis

Envío estándar gratuito en todos los pedidos inferiores a 1 kg.

Devoluciones sin preocupaciones

Aprende más.
Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

$23.00 $19.99
Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

$23.00 $19.99
Descripción

Lower Gear Case Seal Kit – Fits Volvo Penta SX & OMC Cobra Sterndrives (Replaces 3855275, 0778351)

This lower gear case seal kit is designed for Volvo Penta SX series sterndrives (1994–2006) and OMC Cobra SX series sterndrives (1994–1998). It provides a comprehensive solution for repairing leaks and maintaining the integrity of single-propeller outdrives, fitting a wide range of engine models from 3.0L to 8.2L.

This kit serves as a direct replacement for Volvo Penta part numbers 3855275 and 0778351, as well as Sierra 18-2598 and GLM 87750, ensuring compatibility and reliable performance.

  • Installation Type: Direct replacement for single propeller outdrives.
  • Package Contents: Includes a complete 7-piece set of seals and O-rings.
  • Fuel Compatibility: Designed for gasoline sterndrive engines.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Brand Part Number
Volvo Penta 3855275
Volvo Penta / OMC 0778351
Sierra 18-2598
GLM 87750

Compatible Engine Models

Confirm your engine model/year in the table below.

Brand Model Rated HP Stroke Years OEM Part No. Notes
Volvo Penta SX 3.0L (181 CID) 4-Stroke 1994–2006 3855275 Inline 4-cylinder
Volvo Penta SX-C, SX-C1, SX-C2 Various 4-Stroke 1994–2006 3855275
Volvo Penta SX-CT, SX-CT1, SX-CT2 Various 4-Stroke 1994–2006 3855275
Volvo Penta SX-M, SX-M1 Various 4-Stroke 1994–2006 3855275
Volvo Penta SX-MTD, SX-MTD3 Various 4-Stroke 1994–2006 3855275
Volvo Penta SX-RT1, SX-RT2 Various 4-Stroke 1994–2006 3855275
OMC Cobra SX 3.0L (181 CID) 4-Stroke 1994–1998 0778351 Inline 4-cylinder
OMC Cobra SX 4.3L (262 CID) 4-Stroke 1994–1998 0778351 V6
OMC Cobra SX 5.0L (305 CID) 4-Stroke 1994–1998 0778351 V8
OMC Cobra SX 5.7L (350 CID) 4-Stroke 1994–1998 0778351 V8
OMC Cobra SX 5.8L (351 CID) 4-Stroke 1994–1998 0778351 V8
OMC Cobra SX 7.4L (454 CID) 4-Stroke 1994–1998 0778351 V8
OMC Cobra SX 8.2L (502 CID) 4-Stroke 1994–1998 0778351 V8

Brand Model Rated HP Stroke Years OEM Part No. Notes
Volvo Penta 302CMBYC, 302CMBYM 3.0L 4-Stroke 1994–2006 3855275 Inline 4
Volvo Penta 302CMHUB, 302CMLKD 3.0L 4-Stroke 1994–2006 3855275 Inline 4
Volvo Penta 302CMNCA, 302CMNCS 3.0L 4-Stroke 1994–2006 3855275 Inline 4
Volvo Penta 302CPBYC, 302CPBYM 3.0L 4-Stroke 1994–2006 3855275 Inline 4
Volvo Penta 302CPHUB, 302CPLKD 3.0L 4-Stroke 1994–2006 3855275 Inline 4
Volvo Penta 302CPNCA, 302CPNCS 3.0L 4-Stroke 1994–2006 3855275 Inline 4
Volvo Penta 432APNCA, 432BPBYC 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 432BPLKD, 432BPNCS 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 434APNCA, 434BPBYC 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 434BPLKD, 434BPNCS 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 43APHUB, 43FAPNCA 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 43FBPBYC, 43FBPLKD 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 43FBPNCS 4.3L 4-Stroke 1994–2006 3855275 V6
Volvo Penta 502APHUB, 502APHUE 5.0L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 502APNCA, 502APNCS 5.0L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 502BPBYC, 50FAPHUB 5.0L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 50FAPHUE, 50FAPNCA 5.0L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 50FAPNCS, 50FBPBYC 5.0L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 572BPBYC, 572BPLKD 5.7L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 572BPLKR, 572BPNCS 5.7L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 574BPLKD, 57FAPLKD 5.7L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 57FAPNCA, 57FAPNCS 5.7L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 57FCPBYC, 57FCPBYD 5.7L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 57FCPLKD, 57FDPLKD 5.7L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 584APHUB, 584APHUE 5.8L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 584APNCA, 584APNCS 5.8L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 58FAPHUB, 58FAPHUE 5.8L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 58FBPHUB, 58FBPHUE 5.8L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 58FBPNCA, 58FCPNCA 5.8L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 58FCPNCS 5.8L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 744EPNCA, 744FPLKD 7.4L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 744FPNCS, 74FFPNCA 7.4L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 74FGPLKD, 74FGPNCS 7.4L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 74FHPBYC, 74FJPBYC 7.4L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 74FJPBYD 7.4L 4-Stroke 1994–2006 3855275 V8
Volvo Penta 82FCPBYC 8.2L 4-Stroke 1994–2006 3855275 V8

Technical Specifications

Specification Value
Product Type Lower Gear Case Seal Kit
Installation Direct replacement
Fuel Type Gasoline
Housing Material Various (rubber, polymer)
Package Contents 7-piece seal kit
Other Technical Attributes For single propeller outdrives

Package Contents

This 7-piece kit includes all necessary seals and O-rings for a lower gear case service:

  • 1 x Seal Water Supply Tube (3854595)
  • 1 x Seal Water Supply Tube (3852315)
  • 1 x O-Ring Oil Passage (3852595)
  • 1 x O-Ring Support Housing (3852866)
  • 1 x O-Ring (3852865)
  • 1 x O-Ring (333572)
  • 1 x Oil Seal (3858303/3863090)

Installation Guide

Follow these general steps to replace the lower gear case seals:

  1. Begin by draining all the gear lube from the sterndrive's lower unit.
  2. Remove the propeller assembly, followed by the entire lower unit from the sterndrive.
  3. Carefully disassemble the lower gear case to access the old seals. Pay close attention to the order and orientation of all components.
  4. Remove the old seals, O-rings, and any gaskets. Take care not to scratch or damage the metal housing surfaces.
  5. Thoroughly clean all sealing surfaces to remove old sealant, corrosion, or debris.
  6. Lightly lubricate the new seals and O-rings with marine grease before installation.
  7. Using a correctly sized seal driver tool, press the new seals into place until they are properly seated. Ensure they are not installed at an angle.
  8. Reassemble the gear case components in the reverse order of disassembly.
  9. Reinstall the lower unit onto the sterndrive, followed by the propeller.
  10. Refill the lower unit with the manufacturer-specified fresh gear lube to the correct level.
  11. After refilling, check carefully for any signs of leaks around the seals before operating the boat in the water.

Troubleshooting & FAQ

Q: How do I know if this seal kit will fit my sterndrive?
A: This kit is specifically designed for Volvo Penta SX series (1994–2006) and OMC Cobra SX series (1994–1998) sterndrives equipped with single propellers. To ensure a perfect match, please cross-reference your engine model and year with the detailed compatibility tables on this page.

Q: What are the common signs that my gear case seals are failing?
A: The most common indicators of a failing seal are milky, water-contaminated gear lube (which looks like a coffee milkshake), visible oil leaking from the lower unit (especially around the prop shaft), or a recurring need to add more gear lube. Any of these signs suggest it's time for an inspection and seal replacement.

Q: How often should I replace my lower unit seals?
A: It is best practice to inspect your gear lube at least once a year for any signs of water intrusion. We recommend replacing the seals as a preventative measure whenever the lower unit is being serviced or immediately if you detect a leak or fluid contamination.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

  • Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
  • This product is an aftermarket replacement part and is not an OEM component.
  • Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

  • Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
  • Fast Global Shipping: Free delivery worldwide in 5–15 days.
  • Direct from Manufacturer: Competitive pricing without compromising quality.
Envío

Podemos enviar a prácticamente cualquier dirección del mundo con envío gratuito disponible para la mayoría de las regiones.

Para nuestros clientes típicos de EE. UU. y Canadá , nuestros plazos de envío son los siguientes:

  • Amazon FBA : los pedidos se entregarán dentro de 1-5 días hábiles después de realizar el pedido (durante ciertos períodos especiales como promociones importantes, Navidad, etc., el tiempo de entrega de Amazon FBA puede verse afectado).
  • Envío al almacén de EE. UU .: los pedidos se entregarán dentro de los 7 días posteriores a la realización del pedido.
  • Envío al almacén de China : los pedidos se entregarán aproximadamente 12 días después de realizar el pedido.

Al realizar un pedido, estimaremos las fechas de envío y entrega según la disponibilidad de sus artículos y las opciones de envío que elija. Dependiendo del proveedor de envío que elija, las fechas de envío estimadas podrían aparecer en la página de presupuestos de envío.

Tenga en cuenta también que las tarifas de envío de muchos de los artículos que vendemos se basan en el peso. Puede consultar el peso de cada artículo en su página de detalles. Para reflejar las políticas de las empresas de envío que utilizamos, todos los pesos se redondearán a la libra superior.

Acerca de JLM Marine

Fundada en 2002, JLM Marine se ha consolidado como un fabricante dedicado de piezas marinas de alta calidad, con sede en China. Nuestro compromiso con la excelencia en la fabricación nos ha ganado la confianza de las principales marcas marinas a nivel mundial.

Como proveedor directo, evitamos intermediarios, lo que nos permite ofrecer precios competitivos sin comprometer la calidad. Este enfoque no solo promueve la rentabilidad, sino que también garantiza que nuestros clientes reciban el mejor valor directamente del proveedor.

Estamos entusiasmados de ampliar nuestro alcance a través de canales minoristas, llevando nuestra experiencia y compromiso con la calidad directamente a los propietarios de embarcaciones y entusiastas de todo el mundo.

Productos vistos recientemente