63D-W006A-00 Service Kit for Yamaha F50 F60 | JLM Marine

63D-W006A-00 Service Kit for Yamaha F50 F60 | JLM Marine

This comprehensive service kit is designed to fit Yamaha F50 and F60 4-stroke outboard engines across multiple model years and configurations. It provides all essential components for a complete maintenance service, including water pump parts, filters, gaskets, and anodes—ensuring your engine runs reliably season after season.

This kit directly replaces OEM part number 63D-W006A-00, offering a complete solution for routine maintenance on compatible Yamaha engines from 2000 through 2020.

• Complete service solution with 19 components including impeller, filters, thermostat, and anode
• Fits carburettor and fuel-injected models across F50, F50H, F60, F60A, F60C, and F60F engines
• Includes both water pump rebuild parts and all essential filters for comprehensive servicing

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here's a guide to help you identify your engine's serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

This service kit includes the following 19 components for complete engine maintenance:

• 6H3-44352-00 – Impeller × 1
• 63D-44323-00 – Plate, Wear × 1
• 63D-44322-00 – Cup, Insert × 1
• 63D-44316-00 – Gasket × 1
• 93210-59MG7 – O-ring × 1
• 90280-03024 – Key × 1
• 63D-44312-00 – Cover × 1
• 663-44366-00 – Grommet × 1
• 90119-08M15 – Bolt × 4
• 6D8-WS24A-00 – Fuel Filter × 1
• 6C5-24251-00 – Fuel Filter × 1
• 68V-24563-00 – Fuel Filter × 1
• 5GH-13440-60 – Oil Filter × 1
• 6G8-12411-00 – Thermostat × 1
• 62Y-12414-00 – Gasket × 1
• 90430-08020 – Drain Gasket × 4
• 91490-30025 – Cotter Pin × 1
• 67C-45251-00 – Anode × 1
• 24OP149 – Gear Oil Pump × 1

Installation Guide

1. Disconnect the engine from the power source and ensure it is cool before beginning any service work.
2. Remove the lower unit from the engine according to your service manual to access the water pump housing.
3. Disassemble the old water pump by removing the cover, bolts, and extracting the old impeller and wear plate.
4. Clean all mating surfaces thoroughly and inspect for corrosion or damage.
5. Install the new wear plate and insert cup into the housing.
6. Lubricate the new impeller with glycerin or soapy water, then carefully insert it with blades oriented in the correct rotation direction.
7. Install the new gasket, O-ring, key, and grommet as specified in the exploded diagram.
8. Secure the pump cover with the four new bolts and torque to manufacturer specifications.
9. Replace all three fuel filters at their respective locations in the fuel system.
10. Remove the old oil filter and install the new oil filter, then drain old gear oil and refill using the included gear oil pump.
11. Replace the thermostat and its gasket, and install new drain gaskets on all drain plugs.
12. Install the new anode and cotter pin, reassemble the lower unit, refill fluids, and test the engine for proper operation and cooling.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my specific Yamaha engine?
A: Check the compatibility table above for your engine model and year range. You can also verify by cross-referencing the OEM part number 63D-W006A-00 in your Yamaha parts diagram or service manual for your F50 or F60 engine.

Q: How often should I replace the components in this service kit?
A: Yamaha recommends annual replacement of the water pump impeller, or every 100–200 hours of operation. Oil and fuel filters should be replaced at each service interval (typically 100 hours or annually), and anodes should be inspected and replaced when 50% depleted.

Q: What are the signs that my water pump or filters need replacement?
A: Common symptoms include reduced cooling water flow from the tell-tale, engine overheating, rough idling, poor fuel economy, or visible corrosion on anodes. If you notice any of these issues, perform a full service with this kit.

Q: Can I install this kit myself or do I need a mechanic?
A: If you have basic mechanical skills and the appropriate tools, you can install this kit by following your Yamaha service manual. However, professional installation is recommended to ensure proper torque specifications and system integrity.

Q: Does this kit include everything I need for a complete service?
A: This kit includes all major wear components—water pump parts, filters, thermostat, gaskets, and anode. You will need to supply fresh engine oil, gear oil, and basic hand tools separately.

Q: Is this an OEM part or aftermarket?
A: This listing is an aftermarket replacement part. We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window; please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.