Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
🔎 Mercury V-220 Reference Library — Exploded parts diagrams (26 diagrams), specifications, common issues, and maintenance checklist.
The Mercury V-220 is a 220 HP 4-stroke outboard motor. Designed for large center-consoles, offshore sport-fishing boats, and multi-engine configurations.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke |
| Horsepower | 220 HP |
| Displacement | — |
| Bore x Stroke | — |
| Spark Plug (Type & Gap) | — |
| Engine Oil Capacity | — |
| Recommended Engine Oil | SAE 10W-30 4-Stroke Marine Oil |
| Gear Case Oil Capacity | — |
| Idle Speed (in gear) | — |
| Full Throttle RPM Range | — |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury V-220:
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury V-220.
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk), BLEED |
| 2 | 22-59169003 | FITTING |
| 3 | 21-426982 | CHECK VALVE (PRESS-IN - 13/16" LONG) |
| 4 | 21-426233 | CHECK VALVE (PRESS-IN - 11/16" LONG) |
| 5 | 22-15133 | FITTING (PRESS-IN) |
| 6 | 22-56759 | FITTING, Barbed (PRESS-IN) |
| 7 | 22-15026 | CAP, ELBOW (YELLOW) |
| 8 | 22-18205 | TEE |
| 9 | 32-9912688 | TUBING, (36.00 Inches Bulk) |
| 10 | 35-8M0207786 | FILTER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk), BLEED |
| 2 | 22-59169003 | FITTING |
| 3 | 21-426982 | CHECK VALVE (PRESS-IN - 13/16" LONG) |
| 4 | 21-426233 | CHECK VALVE (PRESS-IN - 11/16" LONG) |
| 5 | 22-15133 | FITTING (PRESS-IN) |
| 6 | 22-56759 | FITTING, Barbed (PRESS-IN) |
| 7 | 22-15026 | CAP, ELBOW (YELLOW) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 76258A3 | BRACKET, REAR COWL Comment: (GRAY) |
| 2 | 22-76256 | NOZZLE, TELL TALE |
| 3 | 67984 | SEAL, REAR COWL BRACKET TO COWL |
| 4 | 67228 | SEAL, REAR COWL BRACKET TO COWL |
| 5 | 67999 | SEAL, REAR COWL BRACKET TO COWL |
| 6 | 32-8M0108355 | LINE, (57.00 Inches Bulk), TELL TALE (4") |
| 7 | 22-90824001 | TEE, TELL TALE HOSE |
| 8 | 54-816311T | CLAMP, TELL TALE HOSE |
| 9 | 86386A1 | BRACKET ASSEMBLY, COWL SUPPORT |
| 10 | 10-66687 | SCREW, (#10-32 x 1.50), REAR COWL BRACKET |
| 11 | 85650 | HOUSING, COWL HINGE Comment: (STARBOARD) |
| 12 | 10-64278 | SCREW, (.250-28 x 1.00), COWL HINGE HOUSING |
| 13 | 12-20583 | WASHER, COWL HINGE HOUSING SCREW |
| 14 | 11-35888 | NUT, (.250-28) Stainless Steel, COWL HINGE HOUSING SCREW |
| 15 | 90435 | MOUNT, COWL MOUNTING BRACKET |
| 16 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, COWL MOUNTING BRACKET MOUNT |
| 17 | 11-35888 | NUT, (.250-28) Stainless Steel, COWL MOUNTING BRACKET MOUNT |
| 18 | 99424 | BRACKET, COWLING MOUNTING (LOWER) |
| 19 | 99447 | RETAINER, CABLE |
| 20 | 10-68918 | SCREW, (.190-24 x 1.00), CABLE RETAINER |
| 21 | 67260 | SEAL, CONTROL CABLES |
| 22 | 67241 | HOUSING, COWL LATCH |
| 23 | 10-92051 | SCREW, (10-16 x .75), COWL LATCH HOUSING |
| 24 | 87608 | LATCH, Cowl |
| 25 | 24-60295 | SPRING, COWL LATCH |
| 26 | 88622 | PLATE, CABLE RETAINER |
| 27 | 99391 | RETAINER, OIL LINES |
| 28 | 10-69093 | SCREW, (.250-20 x 1.50), LOWER BRACKET |
| 29 | 12-69057 | WASHER, LOWER BRACKET SCREW (SMALL) |
| 30 | 12-35280 | WASHER, LOWER BRACKET SCREW (LARGE) |
| 31 | 23-88180 | BUSHING, LOWER BRACKET GROMMET |
| 32 | 25-88033 | GROMMET, LOWER BRACKET |
| 33 | 13719T | PLATE, RETAINING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2151-7620A22 | TOP COWL ASSEMBLY, PORT Comment: (GRAY) |
| 2 | 67260 | SEAL, CONTROL CABLE |
| 3 | 67258 | PAD, COWL ASSEMBLY TO FRONT COVER |
| 4 | 88227 | BLANKET, SOUND - COWL |
| 5 | 879871 | BRACKET, COWL ATTACHING - UPPER |
| 6 | 87985 | BRACKET, COWL ATTACHING - LOWER |
| 7 | 10-37562 | SCREW, (.312-18 x 1.00) Stainless Steel |
| 8 | 68048 | SHIELD, INLET - COWL Comment: (PORT) |
| 9 | 10-48409 | SCREW, (#10-16 x .625) Stainless Steel |
| 10 | 2150-7619A5 | TOP COWL ASSEMBLY, STARBOARD Comment: (GRAY) |
| 11 | 88227 | BLANKET, SOUND - COWL |
| 12 | 67260 | SEAL, HARNESS |
| 13 | 62628 | BARREL, RETAINING - COWL LATCH |
| 14 | 46785A5 | LATCH ASSEMBLY, Cowl |
| 15 | 10-31312 | SCREW, (#10-32 x 0.875), BARREL TO COWL LATCH |
| 16 | 15222 | BAR, ADJUSTING - COWL LATCH |
| 17 | 62629 | BARREL, RETAINING COWL LATCH |
| 18 | 24-62624 | SPRING, COWL LATCH |
| 19 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel, SPRING TO ADJUSTING BAR |
| 20 | 10-32,11-859124 | NUT, Stainless Steel, SPRING TO ADJUSTING BAR |
| 21 | 2149-7532A23 | COVER ASSEMBLY, Cowl - Front Comment: (GRAY) |
| 22 | 67615 | BLANKET, SOUND - COWL FRONT COVER |
| 23 | 87907 | HOOK, COWL FRONT COVER |
| 24 | 10-95700 | SCREW, (#10-16 x .500), HOOK TO COWL FRONT COVER |
| 25 | 47341A11 | ROPE AND HANDLE KIT, Manual/Emergency Start (FOR MANUAL STARTING) |
| 26 | 38-151321 | EMBLEM (6") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 455-8745T5 | CRANKSHAFT ASSEMBLY |
| 2 | 30-67923T | BEARING, Ball, CRANKSHAFT (LOWER) |
| 3 | 53-67446 | RING, BALL BEARING |
| 4 | 43-99727A1 | GEAR, Drive |
| 5 | 54196A6 | CARRIER ASSEMBLY, SEAL |
| 6 | 65800 | PACKING, CARRIER |
| 7 | 39-78633 | RING, SEALING - CRANKSHAFT (.139 THICK) |
| 8 | 31-93495T | BEARING, Roller, CRANKSHAFT |
| 9 | 53-67444 | RING, Retaining, ROLLER BEARING |
| 10 | 766-8667T41 | PISTON ASSEMBLY Comment: (PORT) |
| 11 | 39-813011A12 | RING ASSEMBLY, Piston |
| 12 | 53-857196 | RING, Lock, PISTON |
| 13 | 636-8119A6 | CONNECTING ROD ASSEMBLY |
| 14 | 10-93886 | SCREW, (.312-28 x .875), CONNECTING ROD |
| 15 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| 16 | 8M0234886 | BEARING ASSEMBLY, Roller, CRANKSHAFT END |
| 17 | 29-67483 | BEARING, Needle, PISTON END |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 858-8712T41 | CYLINDER BLOCK Comment: (4 SCREW POPPET) |
| 2 | 16-76175 | STUD, POWERHEAD (1-7/8") |
| 3 | 16-8M0034454 | STUD, POWERHEAD (6-3/4") |
| 4 | 17-43044 | PIN, Dowel, LOCATING |
| 5 | 17-8M0036405 | PIN, CYLINDER BLOCK (BEARING RACE) |
| 6 | 27-11338 | GASKET, SEALING |
| 7 | 8M0088723 | COVER, STARTER MOTOR (UPPER) |
| 8 | 10-73657 | SCREW, (.312-18 x 1.50), COVER TO CRANKCASE |
| 9 | 13-8M0204647 | LOCKWASHER, (.312), STARTER MOTOR COVER SCREW |
| 10 | 76867 | COVER, STARTER MOTOR (LOWER) |
| 11 | 10-815549 | SCREW, (.312-18 x 2), COVER TO CRANKCASE |
| 12 | 19-88801 | PLUG, CUPPED |
| 12A | 23-99448 | BUSHING |
| 13 | 84-88807A20 | CABLE ASSEMBLY, COVER |
| 14 | 10-74824 | SCREW, (.312-18 x 1.250) |
| 15 | 1159-8454T2 | END CAP ASSEMBLY, UPPER |
| 16 | 25-54029 | O-RING, (2.800 x .103), END CAP |
| 17 | 31-93496T | BEARING, Roller, END CAP |
| 18 | 26-41953 | SEAL, END CAP |
| 19 | 10-30225 | SCREW AND LOCKWASHER, (.312-18 x 1.00) |
| 20 | 10-24220 | SCREW, (.190-24 x .190) |
| 21 | 22-38407 | PLUG, (.500-14), CYLINDER BLOCK (WATER JACKET) |
| 22 | 16-15094 | STUD, (.190-32 x 1.870) |
| 23 | 16-8M0034435 | STUD, (#10-32 x 1.00) |
| 24 | 23-67269 | SPACER, FLYWHEEL COVER STUD |
| 25 | 12-8M0204663 | WASHER, FLYWHEEL COVER STUD |
| 26 | 12-72761 | WASHER, (.203 x .562 x .060) Stainless Steel, FLYWHEEL COVER STUD |
| 27 | 11-816874 | NUT, FLYWHEEL COVER STUD |
| 28 | 422482 | BRACKET, FLYWHEEL COVER |
| 29 | 10-49668 | SCREW, (.250-20 x .750), BRACKET TO CRANKCASE |
| 30 | 1156-7809T1 | END CAP ASSEMBLY, LOWER |
| 31 | 25-62700 | O-RING, (3.237 x .103), END CAP |
| 32 | 26-41953 | SEAL, END CAP |
| 33 | 10-28636 | SCREW, (.250-20 x .750) |
| 34 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, LOWER END CAP SCREW |
| 35 | 10-64022 | SCREW, (.250-20 x 2.125), ADJUSTING - CYLINDER BLOCK |
| 36 | 11-64015 | NUT, (.250-20), JAM - ADJUSTING SCREW |
| 37 | 26852 | CAP, Nylon, ADJUSTING SCREW |
| 38 | 54-16793 | CLAMP |
| 39 | 10-73286 | SCREW, (.250-20 x .500) Stainless Steel |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 826800A8 | CONTROLLER ASSEMBLY, Detonation |
| 2 | 10-88447 | SCREW, (.190-32 x 1.62), DETONATION CONTROLLER |
| 3 | 12-38833 | WASHER, DETONATION CONTROLLER SCREW |
| 4 | 13381 | PLATE |
| 5 | 84-88807A10 | CABLE ASSEMBLY |
| 6 | 10-62568 | SCREW, (#10-16 x .375), CABLE TO PLATE |
| 7 | 23-94304 | SPACER |
| 8 | 41470A25 | MODULE ASSEMBLY, Oil Injection Warning |
| 9 | 14851T03 | INDICATOR, THROTTLE POSITION |
| 10 | 10-15150 | SCREW, (#8-32 x .625), INDICATOR |
| 11 | 8,13-26995 | LOCKWASHER, Stainless Steel, INDICATOR SCREW |
| 12 | 12-30164 | WASHER, INDICATOR SCREW |
| 13 | 23-15885 | SLEEVE |
| 14 | 13221T01 | SENSOR ASSEMBLY, Temperature |
| 15 | 25-45711 | O-RING, (.612 x .103) |
| 16 | 10-57583T | SCREW, (#8-32 x .375), TEMPERATURE SENSOR |
| 17 | 8,13-26995 | LOCKWASHER, Stainless Steel, TEMPERATURE SENSOR SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| -- | 17-43044 | PIN, Dowel, LOCATING - SPACER (X LONG) |
| 1 | 1590-8343A8 | HOUSING ASSEMBLY, Driveshaft Comment: (GRAY) |
| 2 | 16-74732 | STUD Comment: (X-LONG) |
| 3 | 25067 | BUMPER, LOWER MOUNT SCREW |
| 4 | 10-898831 | SCREW, (.500-20 x 6.00), LOWER MOUNT |
| 5 | 78249 | MOUNT |
| 6 | 12-49339 | WASHER, (.8125), LOWER MOUNT SCREW |
| 7 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 8 | 88238A10 | CABLE ASSEMBLY, Ground |
| 9 | 54-8M0036782 | CLAMP, LOWER MOUNT |
| 10 | 10-66727 | SCREW, (.312-18 x 1.250) |
| 11 | 100-8M4500752 | COVER, LOWER MOUNT CLAMP |
| 12 | 10-88417 | SCREW, (#12-24 x .620), COVER ATTACHING |
| 13 | 11-35521 | NUT, NYLON - COVER TO CLAMP SCREW |
| 14 | 88238A10 | CABLE ASSEMBLY, Ground |
| 15 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel, GROUND WIRE |
| 16 | 12-73862 | WASHER, GEAR HOUSING STUD |
| 17 | 11-29489 | NUT, GEAR HOUSING STUD (CAP) |
| 18 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel, GEAR HOUSING STUD |
| 19 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, GEAR HOUSING STUD |
| 20 | 19-64649 | PLUG, DRIVESHAFT HOUSING |
| 21 | 89743 | TUBE, Exhaust |
| 22 | 66350001 | SEAL, EXHAUST TUBE - LOWER |
| 23 | 86027 | SEAL, EXHAUST TUBE - UPPER |
| 24 | 32-8M0042790 | TUBE, WATER Comment: (X-LONG) |
| 25 | 27-991734 | GASKET, DRIVESHAFT HOUSING TO PLATE |
| 26 | 41945A6 | PLATE ASSEMBLY, DRIVESHAFT HOUSING |
| 27 | 707482 | SEAL, BRACKET |
| 28 | 68011 | BRACKET, SEAL RETAINING |
| 29 | 10-48408 | SCREW, (#10-16 x .500), BRACKET TO PLATE |
| 30 | 17-43044 | PIN, Dowel, LOCATING |
| 31 | 26-38970 | SEAL, WATER TUBE |
| 32 | 10-90192 | SCREW, (.250-20 x .750) Stainless Steel, DIFFUSER TO PLATE |
| 33 | 27-991772 | GASKET, DRIVESHAFT HOUSING PLATE TO EXHAUST PLATE |
| 34 | 12-20553 | WASHER, POWER HEAD STUD |
| 35 | 11-69254 | NUT, POWER HEAD STUD |
| 36 | 41941T | DIFFUSER, EXHAUST |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 14632A2 | ECU, Engine Control Unit |
| 2 | 67245T | BRACKET, COWL MOUNTING (UPPER) |
| 3 | 25-67272 | GROMMET, COWL MOUNTING BRACKET |
| 4 | 90435 | MOUNT, COWL MOUNTING BRACKET |
| 5 | 12-21249 | WASHER, MOUNT ATTACHING |
| 6 | 11-8267089 | NUT, (.250-28), MOUNT ATTACHING |
| 7 | 84-88807A19 | CABLE ASSEMBLY |
| 8 | 14637 | GROMMET |
| 9 | 23-14636 | BUSHING |
| 10 | 10-28667 | SCREW, (.250-20 x 1.00) Stainless Steel |
| 11 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 12 | 12-65567 | WASHER, (.265 x .750 x .048) Stainless Steel |
| 13 | 13202A2 | MODULE ASSEMBLY, Water Sensor |
| 14 | 84-88807A18 | CABLE ASSEMBLY (BLACK) |
| 15 | 10-37571 | SCREW, (.190-32 x .500), WATER SENSOR MODULE |
| 16 | 12-89302 | WASHER, (.203 x .406 x .040), WATER SENSOR MODULE SCREW |
| 17 | 84-98866A14 | HARNESS ASSEMBLY, E.C.U. AND INJECTORS |
| 18 | 54-14695 | CLIP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 27-904841 | GASKET, DIVIDER PLATE |
| 2 | 99169A1 | DIVIDER PLATE |
| 3 | 26-814754 | SEAL, DIVIDER PLATE |
| 4 | 95067 | COVER, EXHAUST MANIFOLD |
| 5 | 10-74824 | SCREW, (.312-18 x 1.250) |
| 6 | 65663A2 | COVER, RELIEF VALVE Comment: OLD DESIGN |
| 7 | 10-38837 | SCREW, (.312-18 x 1.12) Comment: OLD DESIGN |
| 8 | 27-88907003 | GASKET, RELIEF VALVE PLATE Comment: OLD DESIGN |
| 9 | 65664A1 | PLATE ASSEMBLY, RELIEF VALVE Comment: OLD DESIGN |
| 10 | 648771 | DIAPHRAGM Comment: OLD DESIGN |
| 11 | 12-76451 | WASHER, DIAPHRAGM SCREW Comment: OLD DESIGN |
| 12 | 10-69570 | SCREW, (#10-16 x .750) Comment: OLD DESIGN |
| 13 | 24-64878 | SPRING, (Black), COMPRESSION POPPET VALVE Comment: OLD DESIGN |
| 14 | 86596 | POPPET VALVE, VALVE Comment: OLD DESIGN |
| 15 | 65848 | CARRIER, POPPET VALVE Comment: OLD DESIGN |
| 16 | 25-64872 | GROMMET, POPPET VALVE Comment: OLD DESIGN |
| 17 | 14462A1 | COVER, RELIEF VALVE Comment: NEW DESIGN |
| 18 | 10-74824 | SCREW, (.312-18 x 1.250) Comment: NEW DESIGN |
| 19 | 27-78690002 | GASKET, RELIEF VALVE PLATE Comment: NEW DESIGN |
| 20 | 16497A1 | PLATE, RELIEF VALVE Comment: NEW DESIGN |
| 21 | 144791 | DIAPHRAGM Comment: NEW DESIGN |
| 22 | 16496 | DEFLECTOR, Water Comment: NEW DESIGN |
| 23 | 12-76451 | WASHER, DIAPHRAGM SCREW Comment: NEW DESIGN |
| 24 | 10-69570 | SCREW, (#10-16 x .750) Comment: NEW DESIGN |
| 25 | 24-64878 | SPRING, (Black), COMPRESSION POPPET VALVE Comment: NEW DESIGN |
| 26 | 14480 | POPPET, VALVE Comment: NEW DESIGN |
| 27 | 65848 | CARRIER, POPPET VALVE Comment: NEW DESIGN |
| 28 | 25-64872 | GROMMET, POPPET VALVE Comment: NEW DESIGN |
| 29 | 12-85303 | WASHER, POPPET SPRING Comment: NEW DESIGN |
| 30 | 41944A5 | PLATE ASSEMBLY, EXHAUST |
| 31 | 22-996642 | ELBOW, EXHAUST PLATE |
| 32 | 17-43044 | PIN, Dowel, LOCATING - EXHAUST PLATE |
| 33 | 707482 | SEAL, EXHUAST PLATE |
| 34 | 680101 | BRACKET, SEAL RETAINING |
| 35 | 10-48408 | SCREW, (#10-16 x .500) |
| 36 | 23-27132 | BUSHING, EXHUAST PLATE |
| 37 | 10-66727 | SCREW, (.312-18 x 1.250) |
| 38 | 10-68783 | SCREW, (.312-18 x 2.50) |
| 39 | 10-898833 | SCREW, (.375-16 x 3.50) |
| 40 | 25-12602002 | GROMMET, EXHAUST PLATE |
| 41 | 27-991764 | GASKET, EXHAUST PLATE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 79918A1 | COVER KIT, FLYWHEEL |
| 2 | 79022 | MARKER, TIMING |
| 3 | 10-37572 | SCREW, (.190-32 x .380) |
| 4 | 12-72761 | WASHER, (.203 x .562 x .060) Stainless Steel, TIMING MARKER SCREW |
| 5 | 19-89219001 | PLUG, FLYWHEEL COVER |
| 6 | 19-45907 | PLUG, Yellow, FLYWHEEL |
| 7 | 11-52901 | NUT, (.625-18), FLYWHEEL |
| 8 | 12-33001 | WASHER, (.641 x 1.250 x .190), FLYWHEEL |
| 9 | 271-859238A9 | FLYWHEEL |
| 10 | 10-32417 | SCREW, (.250-28 x .625), FLYWHEEL PLATE |
| 11 | 10-68997 | SCREW, (.312-24 x .750), FLYWHEEL HUB |
| 12 | 398-5454A35 | STATOR |
| 13 | 10-19926100 | SCREW, (#10-24 x 1.00), STATOR |
| 14 | 84-69739A3 | HARNESS ASSEMBLY, COIL TO SWITCH BOX Comment: (#2, 4 AND 6) |
| 15 | 96455A11 | TRIGGER PLATE ASSEMBLY |
| 16 | 50-893893 | STARTER MOTOR ASSEMBLY |
| 17 | 23-8M0034918 | COLLAR, STARTER MOTOR |
| 18 | 8M0043376 | STOP, Rubber |
| 19 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, STARTER MOTOR TERMINAL |
| 20 | 11-20890 | NUT, (.250-20), STARTER MOTOR TERMINAL |
| 21 | 84-93388A14 | CABLE ASSEMBLY, Black, SOLENOID TO STARTER MOTOR |
| 22 | 10-69035 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel, CABLE TO STARTER MOTOR |
| 23 | 84-93388A1 | CABLE ASSEMBLY, (6.00 Inches) Black, PLATE TO STARTER MOTOR |
| 24 | 339-832757A4 | COIL ASSEMBLY, Ignition |
| 25 | 67614 | COVER, IGNITION COIL |
| 26 | 10-88447 | SCREW, (.190-32 x 1.62), IGNITION COIL COVER |
| 27 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel, COIL COVER SCREW |
| 28 | 10-32,11-45076 | NUT, Brass, IGNITION COIL TERMINAL |
| 29 | 84-88807A6 | CABLE ASSEMBLY, (3.50 Inches) Black, IGNITION COIL |
| 30 | 10-68513 | SCREW, (#10-32 x .375) Stainless Steel, GROUND STRAP |
| 31 | 84-813715A1 | LEAD ASSEMBLY, HIGH TENSION |
| 32 | 85-63709A1 | BOOT/TERMINAL KIT, HIGH TENSION CABLE |
| 33 | 33-896329885 | SPARK PLUG Comment: (CANADA/BELGIUM) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 14817A2 | MANAGEMENT ASSEMBLY, Fuel |
| 2 | 67748 | ROLLER, CAM |
| 3 | 18715T | INJECTOR, Fuel |
| 4 | 35-17422 | FILTER, INJECTOR |
| 5 | 84-15443 | HARNESS KIT |
| 6 | 35-15442 | FILTER KIT, Fuel |
| 7 | 35-150282 | FILTER, Fuel |
| 8 | 10-400034 | SCREW, (M5 x 14), FILTER COVER |
| 9 | 13-400255 | LOCKWASHER, (M5), COVER SCREW |
| 10 | 32-1350385 | HOSE (1/2" O.D.) |
| 11 | 32-9912688 | TUBING, (36.00 Inches Bulk) (1/8" I.D.) |
| 12 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3/32" I.D.) |
| 13 | 15027 | REGULATOR, PRESSURE |
| 14 | 814233 | ELBOW KIT |
| 15 | 27-18791 | GASKET, PRESSURE REGULATOR |
| 16 | 814012 | PLATE, PRESSURE REGULATOR |
| 17 | 10-814076 | SCREW |
| 18 | 814010 | COVER KIT |
| 19 | 10-4001987 | SCREW, (M4 x 16), COVER TO SEPARATOR |
| 20 | 8,13-26995 | LOCKWASHER, Stainless Steel, COVER SCREW |
| 21 | 26-18790 | SEAL, VAPOR SEPARATOR |
| 22 | 15029 | O-RING AND SEAL KIT |
| 23 | 15446 | VALVE KIT, Float |
| 24 | 15445 | FLOAT KIT |
| 25 | 814011 | BODY KIT |
| 26 | 21-424811 | CHECK VALVE |
| 27 | 10-4000332 | SCREW, (M6 x 35), SEPARATOR TO FUEL MANAGEMENT |
| 28 | 15444 | LINK |
| 29 | 21-18241 | CHECK VALVE |
| 30 | 20-18348 | VALVE, Shut Off |
| 31 | 26-18792 | SEAL, INJECTOR MANIFOLD |
| 32 | 23-19275 | SPACER |
| 33 | 25-88033 | GROMMET |
| 34 | 23-814913 | SPACER |
| 35 | 12-35280 | WASHER (LARGE) |
| 36 | 12-69057 | WASHER (SMALL) |
| 37 | 54-8M0214911 | CLAMP, (15.7), HOSE |
| 38 | 32-1350385 | HOSE (1-3/4 IN.) |
| 39 | 54-816311T | TIE STRAP |
| 40 | 14639 | BLANKET, FUEL PUMP |
| 41 | 14640T | COVER, FUEL PUMP |
| 42 | 10-32228 | SCREW, (#10-32 x .625) |
| 43 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 44 | 10-845674 | SCREW, (.250-20 x 4) |
| 45 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 46 | 14307T01 | PUMP, Fuel |
| 47 | 32-146332 | HOSE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 15930A15 | PUMP ASSEMBLY, Fuel |
| 2 | 21-857005A1 | DIAPHRAGM KIT |
| 3 | NSS | NOT SOLD SEPARATE, CHECK VALVE, RUBBER |
| 4 | NSS | NOT SOLD SEPARATE, GASKET, BOOST |
| 5 | NSS | NOT SOLD SEPARATE, DIAPHRAGM |
| 6 | NSS | NOT SOLD SEPARATE, GASKET, PULSE |
| 7 | NSS | NOT SOLD SEPARATE, SPRING |
| 8 | NSS | NOT SOLD SEPARATE, CAP |
| 9 | NSS | NOT SOLD SEPARATE, CHECK VALVE |
| 10 | NSS | NOT SOLD SEPARATE, RETAINER |
| 11 | NSS | NOT SOLD SEPARATE, SPRING |
| 12 | NSS | NOT SOLD SEPARATE, CAP |
| 13 | 27-8M0204705 | GASKET, BASE |
| 15 | 22-16604 | FITTING, Straight (.125-27), FUEL PUMP |
| 16 | 22-14868 | FITTING, FUEL PUMP (ELBOW) |
| 17 | 144303 | BASE, FUEL PUMP |
| 18 | 987752 | PLATE, FUEL PUMP |
| 19 | 22-56800 | PLUG, Pipe (.0625-27) |
| 20 | 22-15979 | FITTING |
| 21 | 10-16452 | SCREW, (#12-24 x 2.00), FUEL PUMP |
| 23 | 10-4000310 | SCREW, (M5 x 40), FUEL PUMP TO CRANKCASE |
| 24 | 12-4002314 | WASHER, FUEL PUMP SCREW |
| 25 | 32-9072925 | HOSE, PULSE |
| 26 | 22-997511 | FITTING, (.0625-27) Brass, PULSE HOSE |
| 27 | 32-1350385 | HOSE |
| 28 | 54-816311T | CLAMP, FUEL TUBING |
| 29 | 22-14866 | ELBOW, FUEL LINE TO ADAPTOR |
| 30 | 30186 | ADAPTOR, CHECK UNIT |
| 31 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 32 | 24-30189 | SPRING, ADAPTOR STEM |
| 33 | 25-16524 | O-RING, ADAPTOR STEM |
| 34 | 30188 | WASHER, ADAPTOR |
| 35 | 10-69067 | SCREW, (.250-20 x 1.375), ADAPTOR TO BOTTOM COWL |
| 36 | 92037 | SEAL, FUEL CONNECTOR |
| 37 | 13170A3 | BASE, FUEL FILTER |
| 38 | 22-136071 | FITTING, BASE |
| 39 | 10-28668 | SCREW, (.250-20 x .875) Stainless Steel, FUEL FILTER BASE |
| 40 | 35-18458Q3 | FILTER ASSEMBLY, Fuel |
| 41 | 14570 | PROBE, WATER SENSING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 1647-9148T47 | GEAR HOUSING ASSEMBLY Comment: (GRAY) |
| 2 | 22-85822A10 | CONNECTOR ASSEMBLY, SPEEDOMETER |
| 3 | 17-43044 | PIN, Dowel, GEAR HOUSING LOCATING |
| 4 | 16-78639 | STUD, GEAR HOUSING (9") Comment: (EXTRA LONG) |
| 5 | 16-74730 | STUD, GEAR HOUSING (7-1/16") Comment: (EXTRA LONG) |
| 6 | 16-8M0034463 | STUD, (.312 x 3.38), WATER PUMP |
| 7 | 16-306671 | STUD, (.250-20/.250-28 x 3.125), WATER PUMP |
| 8 | 31-42647A1 | BEARING ASSEMBLY, Roller, DRIVESHAFT |
| 9 | 23-43998 | SLEEVE, LUBRICATION |
| 11 | 45-897625T | DRIVESHAFT Comment: (EXTRA LONG) |
| 13 | 12-92721 | WASHER, PINION GEAR |
| 14 | 11-35921 | NUT, (.625-18), PINION GEAR TO DRIVESHAFT |
| 15 | 15-42637A1 | SHIM SET, ROLLER BEARING TO GEAR HOUSING |
| 16 | 31-8M0146566 | BEARING ASSEMBLY, Roller/Cup, DRIVESHAFT |
| 17 | 8245191 | NUT, DRIVESHAFT BEARING |
| 18 | 46-8M0077147 | BASE ASSEMBLY, Water Pump |
| 19 | 27-8M0204678 | GASKET, WATER PUMP TO GEAR HSG |
| 20 | 25-38099 | O-RING, WATER PUMP (2.109 I.D.) |
| 21 | 26-89238 | SEAL, Oil, WATER PUMP |
| 22 | 26-16977 | SEAL, Oil, WATER PUMP |
| 23 | 27-8M0090319 | GASKET, LOWER - WATER PUMP |
| 24 | 27-858524 | GASKET, UPPER - WATER PUMP |
| 25 | 8M0204677 | FACE PLATE, WATER PUMP |
| 26 | 46-96148T1 | BODY ASSEMBLY, Water Pump |
| 27 | 48752T | INSERT, WATER PUMP BODY |
| 28 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 29 | 47-89984T4 | IMPELLER, WATER PUMP |
| 30 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 31 | 10-8M0215009 | SCREW, (#14-8 x 2.25), WATER PUMP |
| 32 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, WATER PUMP SCREW AND STUD |
| 33 | 11-8267119 | NUT, (.250-28), WATER PUMP STUD |
| 34 | 12-36001 | WASHER, WATER PUMP STUD |
| 35 | 11-13436 | NUT, WATER PUMP STUD |
| 36 | 25-8M0214918 | RING, Rubber (DRIVESHAFT) |
| 37 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 38 | 789022 | SHAFT, SHIFT (LOWER) |
| 39 | 53-29641 | E RING, RETAINING - SHIFT SHAFT |
| 40 | 53-78907 | RING, Retaining |
| 41 | 25-25439 | O-RING, (.862 x .103), SHIFT SHAFT BUSHING |
| 42 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 43 | 26-8M0204708 | SEAL, Oil, SHIFT SHAFT BUSHING |
| 44 | 12-77674 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 45 | 10-79953Q04 | SCREW, (.375-16 x .250), GREASE FILLER |
| 46 | 22-8M0058389 | SCREW, Magnetic, DRAIN |
| 47 | 12-191833 | WASHER, GREASE FILLER AND DRAIN SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 1647-9148T47 | GEAR HOUSING ASSEMBLY Comment: (GRAY) |
| 48 | 789562 | SHIFT CAM |
| 49 | 89594A1 | FOLLOWER ASSEMBLY, CAM |
| 50 | 79911A1 | ROD, CLUTCH ACTUATOR |
| 51 | 24-79910 | SPRING, COMPRESSION |
| 52 | 12-78910 | WASHER, COMPRESSION SPRING |
| 53 | 17-8M0084245 | PIN, SPRING LOCATOR |
| 54 | 15-47397A1 | SHIM SET, BEARING OUTER RACE (.002-3-5-10) |
| 55 | 31-78172A1 | BEARING ASSEMBLY, Tapered Roller |
| 56 | 43-44104T2 | GEAR ASSEMBLY, Forward |
| 57 | 31-73363T | BEARING, Roller (1.313 O.D.) |
| 58 | 52-823174T | RATCHET, SLIDING CLUTCH |
| 59 | 17-8M0084243 | PIN, Cross, RATCHET TO PROPELLER SHAFT |
| 60 | 17-78909 | PIN, Detent, RATCHET |
| 61 | 24-78962 | SPRING, RETAINING - CROSS PIN |
| 62 | 44-94148 | PROPELLER SHAFT |
| 64 | 681001 | RING, THRUST - BEARING CARRIER TO GEAR HOUSING |
| 65 | 30-88957T | BEARING, Ball, REVERSE GEAR |
| 66 | 25-8M0214920 | O-RING, BEARING CARRIER |
| 67 | 43567T1 | CARRIER ASSEMBLY, Bearing |
| 68 | 31-30956T | BEARING, Needle, BEARING CARRIER |
| 69 | 26-8M0204670 | SEAL, BEARING CARRIER |
| 70 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 71 | 14-79447 | TAB WASHER, GEAR HOUSING COVER |
| 72 | 8M2011027 | RETAINER, GEAR HOUSING |
| 73 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 74 | 10-66024 | SCREW, (.437-14 x 1.75), TRIM TAB TO GEAR HOUSING |
| 75 | 12-45176 | WASHER, (.453 x .812 x .105) Stainless Steel, DRIVESHAFT HOUSING STUDS |
| 76 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, DRIVESHAFT HOUSING STUDS |
| 77 | 10-74727 | SCREW, (.375-16 x 6.00), GEAR HOUSING Comment: (EXTRA LONG) |
| 78 | 12-835467Q01 | THRUST HUB |
| 79 | 12-31211Q03 | WASHER, Splined, PROPELLER NUT |
| 80 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 81 | 11-52707Q1 | PROP NUT KIT, (.750-16) |
| 82 | 13-423511 | LOCKWASHER, Toothed, PROPELLER SHAFT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 90-14879872 | INSTALLATION MANUAL (GRAY) |
| -- | 27-14697A87 | GASKET SET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 12430A4 | SENSOR ASSEMBLY |
| 2 | 10-48409 | SCREW, (#10-16 x .625) Stainless Steel, SENSOR ATTACHING |
| 3 | 815699T | PUMP, Oil |
| 4 | 25-11379 | O-RING, OIL PUMP |
| 5 | 23-41429A2 | BEARING ASSEMBLY, DRIVE GEAR |
| 6 | 43-14563 | GEAR, Driven |
| 7 | 10-41507 | SCREW, (#10-32 x 1.120), OIL PUMP TO CRANKCASE |
| 8 | 1938512 | LINK, THROTTLE LEVER TO OIL PUMP |
| 9 | 32-82381335 | TUBING, OIL PUMP |
| 10 | 994436 | RESERVOIR, Oil |
| 11 | 54-415823 | CLAMP, OIL HOSE (LARGE) |
| 12 | 32-82381455 | TUBING, OIL RESERVOIR TO OIL PUMP (5-1/4") |
| 13 | 10-690201 | SCREW, (#10-32 x .875), OIL RESERVOIR ATTACHING |
| 14 | 12-42118 | WASHER, OIL RESERVOIR SCREW |
| 15 | 25-42117 | GROMMET, OIL RESERVOIR SCREW |
| 16 | 23-42116 | BUSHING, OIL RESERVOIR SCREW |
| 17 | 32-8M0108355 | LINE, (57.00 Inches Bulk), OIL |
| 18 | 22-42425 | TEE, OIL TUBING |
| 19 | 32-9072925 | HOSE, OIL (6-3/4") |
| 20 | NSS | NOT SOLD SEPARATE, HOUSING ASSEMBLY Comment: (Kit - NLA)(Order parts separately) |
| 21 | 32-99439 | HOSE, (114.00 Inches) |
| 22 | 12540A3 | HOUSING |
| 23 | 12242A1 | LATCH |
| 24 | 21-8781051 | FITTING, CHECK VALVE (CRANKCASE) |
| 25 | 1257-87421 | TANK |
| 26 | 36-43298A2 | CAP ASSEMBLY, OIL TANK |
| 27 | 25-11332 | O-RING, (2.225 x .210), CAP |
| 28 | 816190A4 | HOUSING ASSEMBLY, Adaptor |
| 29 | 25-11332 | O-RING, (2.225 x .210), ADAPTOR HOUSING |
| 30 | 32-99802 | TUBE, OIL PICK-UP |
| 31 | 36-43300A9 | CAP ASSEMBLY, OIL RESERVOIR |
| 32 | 27-43307T | GASKET, RESERVOIR CAP |
| 33 | 8M0187298 | FLOAT ASSEMBLY |
| 34 | 11-99265 | PUSH NUT |
| 35 | 54-415821 | CLAMP, OIL HOSE (SMALL) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 99659A22 | MANIFOLD ASSEMBLY Comment: (GRAY) |
| 2 | 22-56800 | PIPE PLUG, MANIFOLD |
| 3 | 41493A7 | TRIM CYLINDER ASSEMBLY Comment: (GRAY) |
| 4 | 41492A1 | GUIDE ASSEMBLY |
| 5 | 25-41478A1 | REPAIR KIT |
| 6 | 41482A2 | CHECK VALVE KIT |
| 7 | 1100-8M0021648 | GUIDE ASSEMBLY, TRIM ROD |
| 8 | 878413A1 | PISTON/ROD ASSEMBLY, Power Trim, PORT |
| 9 | 35-12184A1 | TRIM FILTER ASSEMBLY |
| 10 | 878414T01 | PISTON/ROD ASSEMBLY, Power Trim, STARBOARD |
| 11 | 17-821539 | PIN, Groove, TRIM CYLINDER (UPPER) |
| 12 | 99660A1 | VALVE ASSEMBLY |
| 13 | 10-4000327 | SCREW, (M6 x 14), COVER |
| 14 | 12-4002315 | WASHER, COVER SCREW |
| 15 | 99642 | COVER, MANIFOLD |
| 16 | 25-48462A4 | O-RING KIT |
| 17 | 19-99609A1 | PLUG ASSEMBLY |
| 18 | 99641A1 | SHAFT ASSEMBLY |
| 19 | 22-56800 | PIPE PLUG, SHAFT |
| 20 | 10-4008820 | SCREW, (M6 x 20), PUMP AND MOTOR |
| 21 | 13-400256 | LOCKWASHER, (M6) |
| 22 | 826729A10 | PUMP AND MOTOR |
| 23 | 99625002 | SHAFT, UPPER |
| 24 | 97-818298Q1 | ANODE ASSEMBLY |
| 25 | 10-4000332 | SCREW, (M6 x 35), ANODE |
| 26 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, ANODE SCREW |
| 27 | 8M0045383 | STRIKER PLATE, TRIM SHAFT |
| 28 | 13-58643 | LOCKWASHER, (.375) |
| 29 | 11-46335 | NUT, (.375-24) |
| 30 | 84-17201A2 | CABLE ASSEMBLY, (17.00 Inches), POWER TRIM Comment: (2 WIRE) |
| 31 | 84-88807A8 | CABLE ASSEMBLY, (3.50 Inches) Black |
| 32 | 8M0185622 | SOLENOID, Starter |
| 33 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel, STARTER SOLENOID |
| 34 | 10-32,11-45076 | NUT, Brass, SOLENOID TERMINAL |
| 35 | 11-94330 | NUT, (.250-20) Brass, SOLENOID TERMINAL |
| 36 | 85-97861 | INSULATOR, STARTER SOLENOID |
| 37 | 54-22875 | CLIP, PUMP WIRE |
| 38 | 8M0084613 | C WASHER, CLIP SCREW |
| 39 | 10-69079 | SCREW, (#10-16 x .440), CLIP TO TRANSOM BRACKET |
| 40 | 17-878267 | PIN, Groove, TRIM CYLINDER (LOWER) |
| 41 | 10-4000377 | SCREW, (M10 x 30), MANIFOLD |
| 42 | 13-400258 | LOCKWASHER, (M10) Stainless Steel, MANIFOLD SCREW |
| 43 | 54-47483 | J CLIP, WIRE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 826729A10 | PUMP AND MOTOR |
| 1 | 12659 | FRAME AND FIELD KIT |
| 2 | 12665 | SPRING KIT, Brush |
| 3 | 13506 | BRUSH CARD KIT |
| 4 | 12662 | PUMP AND END FRAME KIT |
| 5 | 126631 | SEAL KIT, Pump |
| 6 | 12660 | END FRAME KIT |
| 7 | 12661 | ARMATURE KIT |
| 8 | 12664 | THRU BOLT KIT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 15221A5 | CYLINDER HEAD ASSEMBLY Comment: (TOP-HAT) |
| 2 | 27-41247T01 | GASKET, CYLINDER HEAD |
| 3 | 10-13450 | SCREW, (.375-16 x 2.30), CYLINDER HEAD (SPECIAL) |
| 4 | 12-25909 | WASHER, (.406 x .812 x .065), CYLINDER HEAD SCREW |
| 5 | 75692 | THERMOSTAT |
| 6 | 27-8M0204714 | GASKET, THERMOSTAT |
| 7 | 90390A1 | COVER KIT, THERMOSTAT |
| 8 | 10-35386 | SCREW, (.312-18 x 1.00), THERMOSTAT COVER |
| 9 | 22-687271 | FITTING, (.250-18) 90 Degree - Brass, ELBOW - WATER HOSES |
| 10 | 32-77653101 | HOSE, (24.500 Inches Bulk), WATER DISTIBUTION |
| 11 | 22-68728 | FITTING, THERMOSTAT COVER TO WATER HOSES |
| 12 | 54-816311T | CLAMP, WATER HOSES |
| 13A | 97465 | SENDER, Temperature (STARBOARD) |
| 13B | 13536A6 | SENSOR ASSEMBLY, Temperature (PORT) |
| 14 | 137151 | RETAINER, SENSOR AND SENDER |
| 15 | 10-98257 | SCREW, (.312-18 x .500), RETAINER |
| 16 | 825164A1 | SENSOR, Detonation |
| 17 | 10-32,11-45076 | NUT, Brass, DETONATION SENSOR |
| 18 | 14593A4 | ADAPTOR PLATE |
| 19 | 10-28668 | SCREW, (.250-20 x .875) Stainless Steel, ADAPTOR PLATE |
| 20 | 27-146971 | GASKET, ADAPTOR PLATE |
| 21 | 75953 | REED BLOCK |
| 22 | 34-75362A1 | REED ASSEMBLY |
| 23 | 961832 | CLAMP, Reed |
| 24 | 10-823588 | SCREW, (#8-32 x .187), REEDS TO REED BLOCK |
| 25 | 10-92160 | SCREW, (.250-20 x .75), REED BLOCK ATTACHING |
| 26 | 10-90197 | SCREW, (.250-20 x 1.125), REED BLOCK ATTACHING |
| 27 | 27-16737 | GASKET, ADAPTOR PLATE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 1499-8710T21 | SWIVEL BRACKET ASSEMBLY Comment: (GRAY) |
| 2 | 26-87735 | SEAL, Oil, SWIVEL BRACKET (LOWER) |
| 3 | 23-818764 | BUSHING, SWIVEL BRACKET (LOWER AND UPPER) |
| 4 | 25-33466 | O-RING, SWIVEL BRACKET (UPPER) |
| 5 | 23-67668 | SPACER, SWIVEL BRACKET (UPPER) |
| 6 | 22-8M0169589 | FITTING, Grease |
| 7 | 23-821207 | BUSHING, SWIVEL BRACKET |
| 8 | 17-67706A55 | SWIVEL PIN ASSEMBLY, Steering Arm Comment: (GRAY) |
| 9 | 10-8M0176309 | SCREW, (.437-20 x 7.50), STEERING ARM TO UPPER MOUNT |
| 10 | 78687T | MOUNT, RUBBER - UPPER |
| 11 | 12-66921 | WASHER, UPPER MOUNT BOLT |
| 12 | 12-78688 | WASHER, UPPER MOUNT BOLT |
| 13 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, UPPER MOUNT BOLT |
| 14 | 92876A12 | LINK ASSEMBLY, Steering |
| 15 | 10-849838 | SCREW, (.375-24 x 1.25) |
| 16 | 11-8M0204726 | NUT, (.375-24), STEERING LINK SCREW |
| 17 | 12-34931 | WASHER, (.406 x .734 x .063) Stainless Steel, STEERING LINK TO STEERING ARM |
| 18 | 13-78854 | WAVE WASHER, BOTTOM YOKE |
| 19 | 86580A1 | YOKE ASSEMBLY, Bottom Comment: (GRAY) |
| 20 | 53-67684 | RING, Retaining, BOTTOM YOKE |
| 21 | 12-67670 | WASHER, THRUST - SWIVEL BRACKET |
| 22 | 88882 | BUMPER, Top Yoke |
| 23 | 8M0074846 | SENDER ASSEMBLY, Trim |
| 24 | 10-852368 | SCREW, (#10-24 x .750), TRIM SENDER |
| 25 | 10,13-26996 | LOCKWASHER, Stainless Steel, TRIM SENDER SCREW |
| 26 | 12-89302 | WASHER, (.203 x .406 x .040), TRIM SENDER SCREW |
| 27 | 10-64014 | SCREW, (.250-28 x .500), SWIVEL BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 50-893893 | STARTER MOTOR ASSEMBLY |
| 1 | 90645 | DRIVE KIT |
| 2 | 13310T1 | PINION ASSEMBLY, Drive |
| 3 | 75660 | PLATE, DRIVE END |
| 4 | 10-74968 | BOLT, THRU |
| 7 | 79216 | ARMATURE |
| 8 | 898265016 | BRUSH/SPRING KIT |
| 9 | 898265014 | HOLDER, BRUSH |
| 10 | 10-68586 | SCREW, BRUSH AND HOLDER |
| 11 | 15386001 | END CAP, COMMUTATOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 79-895283Q45 | TACHOMETER |
| 2 | 79101T | BRACKET, MOUNTING |
| 3 | 88-72729 | LIGHT BULB, Wedge Base (14V - .19W) |
| 4 | 88-79888 | SOCKET, Light Bulb |
| 5 | 8-32,11-26419 | NUT, Brass |
| 6 | 84-86323A5 | CABLE ASSEMBLY, (1.50 Feet) Purple, TRIM GAUGE |
| 7 | 79-895292Q41 | TRIM GAUGE |
| 8 | 79480 | BRACKET, MOUNTING - TRIM GAUGE |
| 9 | 88-72729 | LIGHT BULB, Wedge Base (14V - .19W), TRIM GAUGE |
| 10 | 88-79888 | SOCKET, Light Bulb, TRIM GAUGE |
| 11 | 8-32,11-26419 | NUT, Brass, TRIM GAGUE TERMINAL |
| 12 | 8,13-26995 | LOCKWASHER, Stainless Steel, TRIM GAUGE TERMINAL |
| 13 | 84-86396A8 | HARNESS ASSEMBLY, Tachometer (5.00 Feet) |
| 14 | 79-895287Q41 | TEMPERATURE GAUGE |
| 15 | 88-72729 | LIGHT BULB, Wedge Base (14V - .19W) |
| 16 | 88-79888 | SOCKET, Light Bulb |
| 17 | 12-26427 | WASHER |
| 18 | 79480 | BRACKET |
| 19 | 8-32,11-26419 | NUT, Brass |
| 20 | 84-88824A4 | CABLE ASSEMBLY, (45.00 Inches) Tan |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 74897T | PIVOT, TRIGGER PLATE |
| 2 | 62459T | BALL JOINT ASSEMBLY, TRIGGER PLATE |
| 3 | 10-32,11-45076 | NUT, Brass, LINK ROD |
| 4 | 76035 | ROD, TRIGGER PLATE |
| 5 | 10-32,11-46438 | NUT, , BALL JOINT |
| 6 | 41094A3 | LEVER ASSEMBLY, SPARK ADVANCE |
| 7 | 10-64022 | SCREW, (.250-20 x 2.125), SPARK ADVANCE LEVER - STOP |
| 8 | 11-64015 | NUT, (.250-20), SPARK ADVANCE STOP SCREW |
| 9 | 26852 | CAP, Nylon, SPARK ADVANCE LEVER STOP SCREW |
| 10 | 10-13627 | SCREW, (.190-32 x 1.250) |
| 11 | 10-32,11-68219 | NUT, Stainless Steel, SPARK ADVANCE LEVER STOP SCREW |
| 12 | 48039 | CAP, SPARK ADVANCE LEVER STOP SCREW |
| 13 | 410952 | LEVER, THROTTLE CONTROL |
| 14 | 10-818165 | SCREW, (.375-16 x 1.75) |
| 15 | 23-55164 | BUSHING, THROTTLE LEVER |
| 16 | 23-55171 | BUSHING, SPARK ADVANCE LEVER |
| 17 | 24-68784 | SPRING, THROTTLE AND SPARK ADVANCE LEVER |
| 18 | 12-68410 | WASHER, SPARK ADVANCE LEVER |
| 19 | 10-64022 | SCREW, (.250-20 x 2.125), THROTTLE LEVER - STOP |
| 20 | 11-64015 | NUT, (.250-20), THROTTLE LEVER STOP SCREW |
| 21 | 26852 | CAP, Nylon, THROTTLE LEVER STOP SCREW |
| 22 | 39483 | LATCH, CABLE |
| 23 | 10-69026 | SCREW, (.250-28 x .880), CABLE LATCH TO THROTTLE LEVER |
| 24 | 24-20099 | SPRING, CABLE LATCH TO THROTTLE LEVER |
| 25 | 11-826709109 | NUT, (.250-28), CABLE LATCH SCREW |
| 26 | 14634 | ROD, THROTTLE CONTROL |
| 27 | 14638 | BARREL, THROTTLE CONTROL ROD |
| 28 | 146351 | CAM, Throttle |
| 29 | 23-8M0215006 | BUSHING |
| 30 | 23-26856 | BUSHING, THROTTLE CAM |
| 31 | 11-36069 | NUT, THROTTLE CAM STUD |
| 32 | 24-41050 | SPRING, THROTTLE RETURN |
| 33 | 814283A2 | BRACKET, ANCHOR - CONTROL CABLES |
| 34 | 98889 | LATCH, CONTROL CABLE |
| 35 | 10-42975 | DRIVE SCREW, LATCH |
| 36 | 10-53167T | SCREW, (.312-18 x .880), ANCHOR BRACKET ATTACHING |
| 37 | 37896 | GUIDE BLOCK, LINK ROD |
| 38 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 39 | 67073A1 | LINK ROD ASSEMBLY |
| 40 | 52100 | WEAR PLATE, LINK ROD |
| 41 | 8M0036768 | LATCH, CONTROL CABLE FASTENING |
| 42 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel, LATCH |
| 43 | 11-36069 | NUT, LINK ROD |
| 44 | 79932A17 | SHIFT SHAFT ASSEMBLY Comment: (X-LONG) |
| 45 | 13-29720 | WAVE WASHER, LINK ROD |
| 46 | 23-26600 | BUSHING, NYLON - LINK ROD |
| 47 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel, LINK ROD |
| 48 | 11-36069 | NUT, LINK ROD TO SHIFT SHAFT |
| 49 | 39519 | CUP, BARREL RETAINER - ANCHOR BAR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-14697A87 | GASKET SET |
| 1 | 3401-8718F8 | BRACKET ASSEMBLY, Transom Comment: (STARBOARD) (GRAY) |
| 2 | 3400-8716A9 | BRACKET ASSEMBLY, Transom Comment: (PORT) (GRAY) |
| 3 | 22-8M0169588 | FITTING, Grease, PORT TRANSOM BRACKET |
| 5 | 99170A2 | TILT TUBE |
| 6 | 11-859133 | NUT, TILT TUBE (1"-14) Comment: (GRAY) |
| 7 | 25-45711 | O-RING, (.612 x .103), TILT TUBE |
| 8 | 13-88750 | WASHER, TILT TUBE |
| 9 | 11-858869 | NUT, (.875-14), TILT TUBE |
| 10 | 10-8M0149747 | SCREW, (.500-20 x 4.500), TRANSOM BRACKET TO TRANSOM |
| 11 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel, TRANSOM BRACKET BOLT |
| 12 | 11-91962 | NUT, (.500-20), TRANSOM BRACKET BOLT |
| 13 | 8M0115104 | LEVER ASSEMBLY, TILT LOCK |
| 14 | 13-99611 | WAVE WASHER, TILT LEVER |
| 15 | 23-65830 | NYLINER, TILT LEVER |
| 16 | 99633 | KNOB, TILT LOCK LEVER |
| 17 | 17-99615 | PIN, Groove |
| 18 | 24-99622 | SPRING |
| 19 | 17-99604 | PIN, Groove |
| 20 | 10-96930A1 | BOLT ASSEMBLY, TILT LOCK |
| 21 | 11-23161 | NUT, (.375-24), BOLT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 434292 | PLATE, IGNITION |
| 2 | 332-7778A12 | SWITCHBOX ASSEMBLY |
| 3 | 10-13669 | SCREW, (#12-24 x 2.00) |
| 4 | 23-94453 | BUSHING, SWITCH BOX SCREW |
| 5 | 10-32,11-45076 | NUT, Brass, SWITCH BOX TERMINAL |
| 6 | 84-60871A10 | WIRE ASSEMBLY, SWITCH BOX |
| 7 | 10-62568 | SCREW, (#10-16 x .375), WIRE ATTACHING |
| 8 | 10-87926 | SCREW, (#10-32 x .500) |
| 9 | 84-65999A3 | CABLE ASSEMBLY, Black |
| 10 | 10-60411 | SCREW, (1.25), IGNITION PLATE |
| 11 | 13-8M0204647 | LOCKWASHER, (.312), IGNITION PLATE SCREW |
| 12 | 12-36042 | WASHER, IGNITION PLATE SCREW |
| 13 | 12-67264 | WASHER, (Rubber) |
| 14 | 23-67268 | BUSHING, IGNITION PLATE SCREW |
| 15 | 8M0058226 | RECTIFIER |
| 16 | 10-38055 | SCREW, (.190-32 x .620) |
| 17 | 10-32,11-45076 | NUT, Brass, RECTIFIER TERMINALS |
| 18 | 87-33386A3 | SWITCH ASSEMLBY |
| 19 | 10-38055 | SCREW, (.190-32 x .620) |
| 20 | 10-32,11-45076 | NUT, Brass, MERCURY SWITCH TERMINAL |
| 21 | 10-42813 | SCREW, (#10-32 X .380), LEAD ATTACHING |
| 22 | 84-88439A2 | CABLE ASSEMBLY, Battery - Negative |
| 23 | 84-96220A6 | HARNESS ASSEMBLY, ENGINE |
| 24 | 88-8M0207796 | FUSE, 20 Ampere |
| 25 | 54-816311T | CLAMP, HARNESS AND CABLES |
| 26 | 89-853654A1 | SOLENOID, Starter |
| 27 | 10-31716 | SCREW, (.250-20 x .620) |
| 28 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 29 | 84-65999A2 | CABLE ASSEMBLY, Black, UPPER MOUNT |
| 30 | 10-32,11-45076 | NUT, Brass, SOLENOID TERMINALS |
| 31 | 13-53166 | LOCKWASHER, (.312), SOLENOID TERMINALS |
| 32 | 11-8M0204668 | NUT, (.312-18), SOLENOID TERMINALS |
| 33 | 85-97861 | INSULATOR, SOLENOID |
| 34 | 10-48409 | SCREW, (#10-16 x .625) Stainless Steel, VOLTAGE REGULATOR |
| 35 | 84-13397A1 | HARNESS ASSEMBLY |
| 36 | 10-32,11-45076 | NUT, Brass, VOLTAGE REGULATOR |
| 37 | 88825A7 | VOLTAGE REGUALTOR |
| 38 | 86-45915 | TERMINAL BLOCK |
| 39 | 10-48408 | SCREW, (#10-16 x .500), TERMINAL BLOCK |
| 40 | 84-88808A20 | CABLE ASSEMBLY (RED) |
| 41 | 87076A10 | IDLE SPEED CONTROL ASSEMBLY |
| 42 | 10-690201 | SCREW, (#10-32 x .875), IDLE SPEED CONTROL |
| 43 | 12-38833 | WASHER, IDLE SPEED CONTROL |
| 44 | 134731 | HOLDER, Fuse |
Regular maintenance keeps your Mercury V-220 running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
