Images
Product
Price
Qty
Options
$71.50
- $38.50
- $38.50
- Unit price
- per
$38.50
$16.69
- $17.99
- $17.99
- Unit price
- per
$17.99
Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
Mercury 90 (6 CYL.) (5299506 THRU 5594656) Parts & Diagrams
🔎 Mercury 90 (6 CYL.) Reference Library — Exploded parts diagrams (23 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 90 (6 CYL.) is a 4-Stroke, Inline 4-Cylinder, EFI, SOHC outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
Quick Reference Specifications
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, EFI, SOHC |
| Horsepower | 90 HP |
| Displacement | 2100 cc |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK IZFR6F-11 |
| Engine Oil Capacity | 5.2 L (5.5 quart) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | 710 mL (24 fl oz) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5000-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 90 (6 CYL.):
- Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
- Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
- Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
- Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
- Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 90 (6 CYL.).
▶BOTTOM COWL AND SHIFT LINKAGE (33 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2115-8963A1 | COWL, BOTTOM |
| 2 | 52862A2 | DRIP TRAY ASSEMBLY, BOTTOM COWL |
| 3 | 37940 | PAD, SOUND - DRIP TRAY |
| 4 | 10-48408 | SCREW, DRIP TRAY TO BOTTOM COWL (1/2") |
| 5 | 32-8M0108355 | HOSE, DRIP TRAY TO BOTTOM COWL (8") |
| 6 | 39616 | BOOT, CONTROL CABLES - BOTTOM COWL |
| 7 | 76369 | SPACER, BOTTOM COWL (COWL FRONT COVER) |
| 8 | 10-48591 | SCREW, SPACER TO BOTTOM COWL (1/2") |
| 9 | 37637 | BOOT, FUEL CONNECTOR - BOTTOM COWL |
| 10 | 37445 | SUPPORT, WIRING HARNESS - BOTTOM COWL |
| 11 | 10-69029 | SCREW, SUPPORT TO BOTTOM COWL (1 3/4") |
| 11A | 11-36069 | NUT, SUPPORT SCREW |
| 13 | 32-8M0108355 | HOSE Comment: TELL TALE - EXHAUST COVER TO BOTTOM COWL (21 1/2") |
| 14 | 52889 | NOZZLE, TELL TALE HOSE TO BOTTOM COWL |
| 15 | 10-48408 | SCREW Comment: TELL TALE NOZZLE TO BOTTOM COWL (1/2") |
| 16 | 22-782792 | ELBOW, TELL TALE HOSE TO CYLINDER BLOCK |
| 17 | 60304A54 | SHIFT SHAFT ASSEMBLY, UPPER |
| 18 | 23-26600 | BUSHING, SHIFT SHAFT |
| 20 | 73402 | LINK ROD ASSEMBLY |
| 21 | 12-35462 | WASHER, LINK ROD |
| 22 | 11-826709109 | NUT, LINK ROD |
| 23 | 13-29720 | WASHER, WAVE - LINK ROD |
| 24 | 52732A6 | BRACKET, ANCHOR - CONTROL CABLES |
| 25 | 39519 | CAP, BARREL RETAINER - ANCHOR BRACKET |
| 26 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING |
| 27 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING |
| 28 | 39667 | COVER, NYLON - SHIFT CABLE |
| 29 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 30 | 10-35386 | SCREW Comment: ANCHOR BRACKET TO CYLINDER BLOCK (1") |
| 31 | 24-20099 | SPRING, LINK ROD TO GUIDE BLOCK |
| 32 | 2115-3807 | GUIDE BLOCK, LINK ROD |
| 33 | 52100 | WEAR PLATE, LINK ROD |
| 34 | 8M0036768 | LATCH Comment: CONTROL CABLE FASTENING - ANCHOR BRACKET |
▶CARBURETOR ASSEMBLY (22 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| -- | 1395-51091 | REPAIR PARTS KITS (1 PER CARBURETOR) |
| 1 | 1368-7469A3 | CARBURETOR ASSEMBLY (CENTER/BOTTOM) |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 6 | 1395-83181 | INLET NEEDLE, SEAT AND GASKET |
| 10 | 1395-5680 | COVER, FLOAT BOWL |
| 11 | 1395-5733 | JET, BOWL VENT |
| 12 | 1395-5734 | HOSE, ECONOMIZER |
| 13 | 10-52195 | SCREW, FLOAT BOWL COVER |
| 14 | 1395-4804 | SCREW, FLOAT BOWL COVER |
| 15 | 13-26995 | LOCKWASHER, FLOAT BOWL COVER SCREW |
| 17 | 8146791 | LEVER, THROTTLE Comment: USED ON CENTER AND LOWER CARBURETORONLY--REPLACED WITH A-85943A1 LEVER ON UPPER CARBURETOR |
| 18 | 1395-6027 | SCREW, THROTTLE STOP LEVER |
| 19 | 1395-7942 | SHAFT, THROTTLE (CENTER/BOTTOM) |
| 21 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 22 | 1395-5108 | SHUTTER, THROTTLE |
| 27 | 1395-4542 | SCREW, PLUG - MAIN NOZZLE |
| 28 | 1395-6029 | JET, MAIN FUEL (.068) |
| 29 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 32 | 1395-4543 | SCREW, BODY CHANNEL |
| 34 | 27-481641 | GASKET, CARBURETOR FLANGE |
| 35 | 11-64809 | NUT, CARBURETOR MOUNTING STUD |
▶CARBURETOR LINKAGE AND CHOKE SOLENOID (31 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 54293A10 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 3 | 11-68219 | NUT, SOLENOID TERMINAL |
| 4 | 10-25299 | SCREW, CHOKE SOLENOID (3/4") |
| 5 | 13-8M0204647 | LOCKWASHER, CHOKE SOLENOID SCREW |
| 6 | 90548A1 | PLUNGER AND LINK ASSEMBLY, CHOKE SOLENOID |
| 7 | 85943A1 | LEVER, THROTTLE (UPPER CARBURETOR) |
| 8 | 10-60293 | SCREW, THROTTLE LEVER |
| 8A | 12-74726 | WASHER, THROTTLE LEVER SCREW |
| 9 | 1368-7469A3 | CARBURETOR ASSEMBLY (CENTER/BOTTOM) |
| 10 | 53720A2 | THROTTLE PICK-UP BRACKET ASSEMBLY |
| 11 | 10-66104 | SCREW, THROTTLE BRACKET MOUNTING |
| 12 | 28-89694 | INSERT, THROTTLE COUPLING |
| 17 | 90242A1 | KNOB, CHOKE ROD |
| 18 | 25-20116 | GROMMET, CHOKE ROD |
| 19 | 49589 | STRAP, CHOKE KNOB TO CHOKE ROD |
| 20 | 10-77137 | SCREW, STRAP TO CHOKE KNOB (5/8") |
| 22 | 48203 | ROD, CHOKE |
| 23 | 10-48591 | SCREW, STRAP TO CHOKE ROD (1/2") |
| 24 | 11-46438 | NUT, STRAP TO CHOKE ROD SCREW |
| 25 | 48152 | SHUTTER, CHOKE - CARBURETOR |
| 26 | 16-69037 | STUD, CARBURETOR - CHOKE SHUTTER PIVOT |
| 27 | 11-20110 | NUT, CHOKE SHUTTER TO CARBURETOR STUD |
| 28 | 35-57819 | SCREEN ASSEMBLY, FILTER - CARBURETOR |
| 29 | 10-23015 | SCREW Comment: UPPER CARBURETOR FILTER SCREEN TO CARB. (1") |
| 30 | 24-57818 | SPRING, UPPER FILTER SCREEN SCREW |
| 31 | 11-20110 | NUT Comment: CARBURETOR FILTER SCREEN FASTENING SCREW |
| 32 | 24-48230 | SPRING, CHOKE ROD TENSION |
| 33 | 10-657461 | STUD, CHOKE ROD SPRING TO CARBURETOR |
| 34 | 23-32427 | SPACER, CHOKE ROD SPRING STUD |
| 35 | 11-8M0207775 | NUT, CHOKE ROD SPRING TO CARBURETOR STUD |
▶CLAMP BRACKET AND REVERSE LOCK (46 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY |
| 2A | 10-78495 | SCREW, WASHER ATTACHING |
| 2B | 12-78493 | WASHER, THUMB SCREW |
| 3 | 75043 | CAP, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLAMP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKET Comment: (NOT USED WITH FULL POWER TRIM) |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY Comment: (NOT USED WITH FULL POWER TRIM) |
| 13 | 10-68299 | BOLT Comment: CLAMP BRACKET TO BOAT TRANSOM (UPPER) |
| 14 | 12-68300 | WASHER, CLAMP BRACKET BOLT (UPPER) |
| 15 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 16 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 17 | 24-94891 | SPRING, COIL - SWIVEL BRACKET Comment: NOT USED WITH FULL POWER TRIM |
| 18 | 17-38311 | PIN, COIL SPRING MOUNTING Comment: NOT USED WITH FULL POWER TRIM |
| 19 | 23-28688 | SPACER, RUBBER - COIL SPRING POSITING Comment: NOT USED WITH FULL POWER TRIM |
| 20 | 63473 | TUBE Comment: CUSHION - SHOCK PIN (USED WITH FULL POWER TRIM) |
| 21 | 76386 | TILT LOCK ASSEMBLY (STARBOARD) |
| 22 | 76385T | TILT LOCK ASSEMBLY (PORT) |
| 23 | 79659 | TUBE, TILT LOCK |
| 25 | 13-69150 | WASHER Comment: WAVE - TILT LOCK (STARBOARD SIDE ONLY) |
| 25A | 26-22734 | OIL SEAL, SWIVEL BRACKET (TILT LOCK) |
| 25B | 12-76388 | WASHER, TILT LOCK (STARBOARD SIDE ONLY) |
| 25C | 25-627021 | "O" RING, TILT LOCK |
| 26 | 18-47959 | COTTER PIN, TILT LOCK |
| 27 | 87431 | REVERSE LOCK ASSEMBLY Comment: NOT USED WITH FULL POWER TRIM |
| 28 | 24-78203A2 | SPRING, REVERSE LOCK TENSION Comment: NOT USED WITH FULL POWER TRIM |
| 29 | 56349 | SHAFT, REVERSE LOCK PIVOT Comment: NOT USED WITH FULL POWER TRIM |
| 30 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT Comment: NOT USED WITH FULL POWER TRIM |
| 31 | 55-28414 | PIN, LOWER SHOCK MOUNTING |
| 32 | 10-21937 | SCREW, LOWER SHOCK PIN |
| 33 | 11-8M0207775 | NUT, LOWER SHOCK PIN SCREW |
| 34 | 55-58780A7 | SHOCK ABSORBER Comment: NOT USED WITH FULL POWER TRIM |
| 35 | 23-32171 | BUSHING, RUBBER - SHOCK ABSORBER (UPPER) Comment: NOT USED WITH FULL POWER TRIM |
| 36 | 23-28198 | BUSHING, RUBBER - SHOCK ABSORBER (LOWER) Comment: NOT USED WITH FULL POWER TRIM |
| 37 | 23-73203 | SPACER Comment: UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 38 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 39 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 40 | 12-69374 | WASHER Comment: UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 41 | 10-69375 | SCREW Comment: UPPER AND LOWER SHOCK MOUNTING PIN |
▶COWLING AND FRONT COVER (15 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 92-271091 | ADHESIVE COMPOUND, EMBLEM FASTENING |
| 1 | 2183-7928A3 | COWL FRONT COVER ASSEMBLY Comment: (WITHOUT DECALS) |
| 2 | 56849 | KNOB, COWL FRONT COVER FASTENING |
| 3 | 12-30771 | WASHER, COVER FASTENING KNOB (RUBBER) |
| 4 | 12-59572 | WASHER, COVER FASTENING KNOB (PLASTIC) |
| 5 | 24-30772 | SPRING, TENSION - FASTENING KNOB |
| 6 | 17-29077 | ROLL PIN, TENSION SPRING TO KNOB |
| 7 | 31089 | STRIP, SOUND ABSORBING |
| 8 | 38674 | BAG, STARTER ROPE |
| 9 | 35769 | SEAL, SOUND ABSORBING - UPPER |
| 10 | 53334 | SEAL, SOUND ABSORBING - TOP |
| 11 | 2136-4660A4 | WRAP AROUND COWL ASSEMBLY Comment: (WITHOUT DECALS) |
| 12 | 46785A1 | COWL LATCH ASSEMBLY |
| 13 | 30413 | HOOK, COWL LATCH FASTENING |
| 14 | 30021 | BLANKET, SOUND ABSORBING |
▶CRANKSHAFT, PISTONS AND CONNECTING RODS (31 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 27-85653A87 | GASKET SET |
| 1 | 436-9072A1 | CRANKSHAFT ASSEMBLY |
| 3 | 30-62567T | BEARING, BALL - UPPER |
| 4 | 30-63742T | BEARING, BALL -LOWER |
| 5 | 54196A6 | CARRIER ASSEMBLY, "O" RING |
| 6 | 65800 | "O"RING, CARRIER |
| 7 | 535-5397A4 | CENTER MAIN BEARING ASSEMBLY |
| 8 | 17-20032 | DOWEL PIN, CENTER MAIN BEARING |
| 9 | 29-714221 | BEARING, NEEDLE - OUTER RACE |
| 10 | 26113T | RACE, OUTER (PAIR) |
| 11 | 53-26933 | RING, SNAP - OUTER RACE |
| 12 | 17-47246 | DOWEL PIN, STEPPED |
| 13 | 10-22968 | SCREW, CENTER MAIN BEARING CLAMPING |
| 14 | 11-8M0207775 | NUT, BEARING CLAMPING SCREW |
| 15 | 540-5266T5 | MAIN BEARING ASSEMBLY, VALVE TYPE |
| 16 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 17 | 10-45775 | SCREW, MAIN BEARING CLAMPING |
| 18 | 11-45774 | NUT, MAIN BEARING CLAMPING SCREW |
| 19 | 34-56007A1 | REED SET, MATCHED - MAIN BEARING |
| 20 | 34-56008 | REED STOP, MAIN BEARING REED VALVES |
| 21 | 10-62204 | SCREW, REED STOP MOUNTING |
| 22 | 11-53153 | NUT, REED STOP SCREW |
| 23 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY |
| 24 | 53-857196 | LOCK RING, PISTON PIN |
| 25 | 39-78816A12 | RING, PISTON |
| 26 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 27 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 28 | 10-54803 | SCREW, CONNECTING ROD |
| 29 | 11-49091 | NUT, CONNECTING ROD SCREWS |
| 30 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 31 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
▶CYLINDER BLOCK AND CRANKCASE ASSEMBLY (26 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-7741A2 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 2 | 27-53862 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 66517 | RESTRICTION, CRANKCASE BLEED |
| 4 | 16-64936 | STUD, CARBURETOR MOUNTING (1 3/16") |
| 5 | 16-64281 | STUD Comment: CRANKCASE TO EXHAUST EXTENSION PLATE (1 7/8") |
| 6 | 17-43044 | PIN, DOWEL - CRANKCASE TO CYLINDER BLOCK |
| 7 | 17-63779 | PIN, DOWEL - CYLINDER BLOCK TO MAIN BEARING |
| 8 | 16-64282 | STUD Comment: CYLINDER BLOCK TO DRIVE SHAFT HOUSING PLATE (4") |
| 9 | 86473 | COVER, STARTER MOTOR BRACKET - TOP |
| 10 | 10-815549 | SCREW, TOP COVER ATTACHING (2") |
| 11 | 13-8M0204647 | LOCKWASHER, TOP COVER SCREWS |
| 13 | 76867 | COVER, STARTER MOTOR BRACKET - BOTTOM |
| 14 | 10-73279 | SCREW, BOTTOM COVER ATTACHING (1 7/8") |
| 15 | 13-8M0204647 | LOCKWASHER, BOTTOM COVER SCREW |
| 17 | 10-74824 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 1/4") |
| 18 | 12-22753 | WASHER Comment: CRANKCASE TO CYLINDER BLOCK SCREWS |
| 19 | 11-29250 | NUT Comment: CRANKCASE TO CYLINDER BLOCK SCREWS (LOWER) |
| 20 | 10-20359 | SCREW, CENTER MAIN BEARING LOCKING |
| 21 | 14-20091 | TAB WASHER, BEARING LOCKING SCREW |
| 25 | 21-42866 | CHECK VALVE, BLEED HOSE - UPPER |
| 26 | 32-9938779 | HOSE, BLEED (22") |
| 27 | 21-428671 | CHECK VALVE, BLEED HOSE - LOWER |
| 28 | 22-996642 | ELBOW, BALANCE HOSE |
| 29 | 32-8M0108355 | HOSE, BALANCE - MAIN BEARING (6 1/4") |
| 30 | 22-8585531 | TEE, BALANCE HOSE |
▶DRIVE SHAFT HOUSING ASSEMBLY (37 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1573-5239A4 | DRIVE SHAFT HOUSING ASSEMBLY |
| 2 | 16-56295 | STUD Comment: DRIVE SHAFT HOUSING TO GEAR HOUSING (2 11/16") |
| 3 | 19-64649 | PLUG, PLASTIC - TRIM TAB SCREW HOLE |
| 5 | 37417 | COVER, TRIM - DRIVE SHAFT HOUSING |
| 6 | 10-57807 | SCREW, TRIM COVER TO BOTTOM COWL |
| 6A | 25-92012 | GROMMET, PLASTIC - TRIM COVER SCREW |
| 6B | 46933A2 | GROUND STRAP ASSEMBLY, TRIM COVER SCREW |
| 6C | 10-62568 | SCREW, GROUND STRAP ATTACHING |
| 7 | 32-60897 | TUBE, WATER INLET |
| 8 | 78184T | TUBE, EXHAUST |
| 8A | 65638 | BOOT, TUBE MOUNT |
| 11 | 11-69254 | NUT, POWERHEAD STUDS (3/8-24) |
| 12 | 12-20553 | WASHER, POWERHEAD STUDS |
| 14 | 52887 | GUIDE, PUSH ROD - REVERSE LOCKING Comment: NOT USED WITH FULL POWER TRIM |
| 15 | 47558 | ROD, PUSH - REVERSE LOCK Comment: NOT USED WITH FULL POWER TRIM |
| 16 | 11-69254 | NUT, JAM - PUSH ROD Comment: NOT USED WITH FULL POWER TRIM |
| 17 | 47559 | YOKE, PUSH ROD Comment: NOT USED WITH FULL POWER TRIM |
| 19 | 18-25191 | COTTER PIN, PUSH ROD PIN Comment: NOT USED WITH FULL POWER TRIM |
| 20 | 75296 | MOUNT, RUBBER - UPPER |
| 21 | 12-47840 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 22 | 12-31263 | WASHER, UPPER MOUNT BOLT |
| 23 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 24 | 75299 | MOUNT, RUBBER - LOWER |
| 25 | 10-75284 | SCREW, LOWER MOUNT (5 1/2") |
| 26 | 12-49339 | WASHER, LOWER MOUNT SCREW |
| 27 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 28 | 25067 | BUMPER, RUPPER - LOWER MOUNTING SCREW |
| 30 | 11-8M0204653 | NUT Comment: GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 31 | 12-45176 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 32 | 11-29489 | NUT Comment: GEAR HOUSING AND DRIVE SHAFT HOUSING STUDS |
| 33 | 12-45176 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 34 | 35608 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 35 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 36 | 10-29256 | SCREW Comment: LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING |
| 37 | 35474T | COVER, LOWER MOUNT CLAMP |
| 38 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 39 | 10-29722 | SCREW, COVER TO LOWER CLAMP MOUNT |
▶END CAP, MANIFOLD AND EXHAUST COVERS (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 852-7741A2 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 2 | 1161-5940A2 | END CAP ASSEMBLY |
| 3 | 26-41953 | OIL SEAL, END CAP |
| 4 | 25-47254 | "O" RING |
| 5 | 15-73644A1 | SHIM, END CAP TO CRANKCASE (.006-10) |
| 6 | 10-812618 | SCREW, END CAP MOUNTING (1") |
| 7 | 1148-5410T1 | END CAP ASSEMBLY, LOWER |
| 9 | 26-41953 | OIL SEAL, END CAP |
| 10 | 25-32546 | "O" RING, END CAP |
| 11 | 15-20085A1 | SHIM, END CAP TO CRANKCASE (.005-10) |
| 12 | 10-30225 | SCREW, END CAP MOUNTING (1") |
| 13 | 71808 | COVER, WATER JACKET - CYLINDER BLOCK |
| 14 | 27-721421 | GASKET, WATER JACKET COVER |
| 15 | 10-53167T | SCREW Comment: WATER JACKET COVER TO CYLINDER BLOCK (7/8") |
| 16 | 12-8M0042642 | WASHER Comment: WATER JACKET COVER FASTENING SCREW |
| 17 | 27-854952 | GASKET, CYLINDER BLOCK TO BAFFLE PLATE |
| 18 | 757781 | PLATE, BAFFLE - EXHAUST MANIFOLD |
| 19 | 27-854972 | GASKET Comment: BAFFLE PLATE TO EXHAUST MANIFOLD COVER |
| 20 | 99896A1 | COVER, EXHAUST MANIFOLD |
| 21 | 10-53576 | SCREW, MANIFOLD COVER MOUNTING |
| 23 | 1023-8368A1 | COVER, CYLINDER BLOCK |
| 24 | 27-981853 | GASKET, CYLINDER BLOCK COVER |
| 25 | 10-8M0214943 | SCREW, COVER MOUNTING (1") |
| 27 | 22-68307 | PLUG, PIPE - CYLINDER BLOCK COVER |
| 28 | 37440 | BRACKET, MOUNT SUPPORT - CYLINDER BLOCK |
| 29 | 10-35386 | SCREW, BRACKET TO CYLINDER BLOCK (1") |
| 30 | 87872 | COVER, TRANSFER PORT |
| 31 | 27-856730 | GASKET, TRANSFER PORT COVER |
| 32 | 10-28636 | SCREW Comment: TRANSFER PORT COVER MOUNTING (3/4") |
| 33 | 46933A3 | GROUND STRAP ASSEMBLY Comment: CYLINDER BLOCK COVER |
| 34 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
▶EXHAUST EXTENSION PLATE (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 43289A2 | PLATE ASSEMBLY, EXHAUST EXTENSION |
| 2 | 23-27132 | BUSHING, NYLON - EXHAUST EXTENSION PLATE |
| 3 | 37918 | SEAL, EXHAUST EXTENSION PLATE |
| 4 | 99358 | STRIP, RETAINING Comment: EXHAUST EXTENSION PLATE SEAL |
| 5 | 10-37571 | SCREW Comment: SEAL AND RETAINING STRIP TO EXT. PLATE (1/2") |
| 6 | 17-23784 | DOWEL PIN, EXHAUST EXTENSION PLATE |
| 7 | 27-692381 | GASKET, POWERHEAD TO EXTENSION PLATE |
| 8 | 10-66023 | SCREW, ADAPTOR PLATE TO HOUSING PLATE (2") |
| 10 | 10-66023 | SCREW, HOUSING PLATE TO DRIVE SHAFT HGS. (2") |
| 11 | 27-661021 | GASKET, PLATE TO DRIVE SHAFT HSG. PLATE |
| 14 | 26-60898 | SEAL, DRIVE SHAFT HOUSING PLATE |
| 15 | 43290A4 | PLATE ASSEMBLY, DRIVE SHAFT HOUSING |
| 16 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 17 | 17-23784 | DOWL PIN, DRIVE SHAFT HOUSING PLATE |
| 18 | 27-62362 | GASKET Comment: MEGAPHONE TO DRIVE SHAFT HOUSING PLATE |
| 19 | 99699 | MEGAPHONE, EXHAUST |
| 20 | 10-60480 | SCREW Comment: MEGAPHONE TO DRIVE SHAFT HOUSING PLATE (1 1/8") |
| 21 | 12-8M0204649 | WASHER, MEGAPHONE SCREW |
| 22 | 12-20553 | WASHER, POWERHEAD STUD |
| 23 | 11-82671013 | NUT, POWERHEAD STUD |
▶FLYWHEEL, STARTER MOTOR AND STATOR (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, FLYWHEEL |
| 2 | 11-52901 | NUT, FLYWHEEL ATTACHING |
| 3 | 12-33001 | WASHER, FLYWHEEL ATTACHING |
| 4 | 248-8722A7 | FLYWHEEL, ASSEMBLY, COMP. |
| 5 | 10-32417 | SCREW, FLYWHEEL PLATE |
| 6 | 10-68997 | SCREW, FLYWHEEL HUB |
| 7 | 398-5454A17 | STATOR ASSEMBLY |
| 8 | 10-75840 | SCREW, STATOR ATTACHING (7/8") |
| 9 | 96455A9 | TRIGGER PLATE ASSEMBLY |
| 10 | 54-61001 | CLAMP, TRIGGER HARNESS |
| 11 | 50-898265010 | STARTER MOTOR |
| 12 | 23-8M0034918 | COLLAR, STARTER MOTOR |
| 13 | 23-56774 | SPACER, STARTER MOTOR |
| 14 | 8M0043376 | STOP, RUBBER - STARTER MOTOR |
| 15 | 84-93388A1 | WIRE ASSEMBLY Comment: PLATE TO STARTER MOTOR (BLACK) |
| 16 | 10-69035 | SCREW, CABLE TO STARTER MOTOR |
| 17 | 84-93389A6 | WIRE ASSEMBLY Comment: SOLENOID TO STARTER MOTOR (YELLOW) |
| 18 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 19 | 11-64015 | NUT, STARTER MOTOR TERMINAL |
▶FUEL PUMP AND FUEL LINE ASSEMBLY (29 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 13527A1 | FUEL PUMP ASSEMBLY |
| 2 | 21-8M0084277 | CHECK VALVE ASSEMBLY |
| 3 | 89031A3 | DIAPHRAGM ASSEMBLY |
| 8 | 35-59072 | SCREEN, FUEL INLET |
| 11 | 23004 | RETAINER, CHECK VALVE |
| 12 | 10-43725 | SCREW, RETAINER ATTACHING |
| 13 | 86295 | BASE, FUEL PUMP |
| 14 | 879901 | CHAMBER, PULSE - FUEL PUMP |
| 15 | 35-91078A1 | COVER, FUEL INLET |
| 16 | 10-37370 | SCREW, FUEL FILTER COVER ATTACHING (5/8") |
| 17 | 10-73013 | SCREW, FUEL PUMP ATTACHING (1 1/2") |
| 18 | 13-26996 | LOCKWASHER, FUL PUMP ATTACHING SCREW |
| 19 | 22-19688 | FITTING, FUEL OUTLET |
| 20 | 32-8M0108355 | FUEL LINE Comment: FUEL PUMP TO CARBURETOR (6 1/4" - 2 3/4") |
| 21 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 22 | 22-19688 | FITTING, ELBOW - UPPER CARBURETOR |
| 23 | 22-73318 | TEE, FUEL LINE |
| 24 | 22-64706001 | FITTING, TEE - CENTER CARBURETOR |
| 25 | 22-19688 | FITTING, ELBOW - LOWER CARBURETOR |
| 26 | 32-8M0108355 | FUEL LINE, ADAPTOR TO FUEL PUMP (16") |
| 27 | 22-63981 | ELBOW, FUEL LINE TO ADAPTOR |
| 28 | 22833 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 29 | 23069 | STEM, CHECK UNIT ADAPTOR |
| 30 | 24-23067T | SPRING, ADAPTOR STEM |
| 31 | 25-16524 | "O" RING, ADAPTOR STEM |
| 32 | 30188 | CUP WASHER, ADAPTOR |
| 33 | 10-69029 | SCREW, ADAPTOR TO BOTTOM COWL (1 3/4") |
| 34 | 11-36069 | NUT, ADAPTOR SCREW |
▶GEAR HOUSING ASSEMBLY, COMPLETE (76 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-85653A87 | GASKET SET |
| 1 | 1655-7333T23 | GEAR HOUSING ASS'Y |
| 1A | 22-85822A10 | CONNECTOR ASSEMBLY, SPEEDOMETER |
| 2 | 17-8M0084726 | DOWEL PIN, GEAR HOUSING LOCATING |
| 3 | 16-57921 | STUD Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING (4") |
| 4 | 16-8M0133358 | STUD Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING (2 1/16") |
| 5 | 16-8M0034463 | STUD Comment: WATER PUMP BASE AND BODY TO GEAR HOUSING (3 3/8") |
| 6 | 16-306671 | STUD Comment: WATER PUMP BASE AND BODY TO GEAR HOUSING (3 1/8") |
| 7 | 31-32898T | BEARING, ROLLER - DRIVE SHAFT |
| 8 | 45-42646 | DRIVE SHAFT |
| 9 | 43-68548T3 | GEAR, PINION - DRIVE SHAFT |
| 10 | 11-35921 | NUT, PINION GEAR TO DRIVE SHAFT |
| 11 | 15-57007A1 | SHIM, BALL BEARING TO BASE |
| 12 | 31-69220T | ROLLER BEARING, DRIVE SHAFT |
| 14 | 27-8M0214962 | GASKET, WATER PUMP BASE |
| 15 | 25-8M0214923 | "O" RING, WATER PUMP BASE |
| 16 | 46-96146A5 | WATER PUMP BASE ASSEMBLY |
| 17 | 26-94038 | OIL SEAL, WATER PUMP BASE |
| 18 | 26-16977 | OIL SEAL, WATER PUMP BASE |
| 19 | 17-35973 | DOWEL PIN Comment: WATER PUMP BASE TO WATER PUMP BODY |
| 20 | 27-8M0090319 | GASKET Comment: LOWER - WATER PUMP BASE TO FACE PLATE |
| 21 | 8M0204677 | PLATE Comment: FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 22 | 27-858524 | GASKET Comment: UPPER - FACE PLATE TO WATER PUMP BODY |
| 23 | 46-96148T1 | WATER PUMP BODY ASSEMBLY |
| 24 | 48752T | INSERT, WATER PUMP BODY |
| 26 | 26-38970 | SEAL, RUBBER - WATER INLET TUBE |
| 27 | 47-89984T4 | IMPELLER, WATER PUMP |
| 28 | 28-8M0214992 | KEY, IMPELLER DRIVE |
| 29 | 10-30720 | SCREW Comment: WATER PUMP BODY TO GEAR HOUSING (2 1/4") |
| 30 | 13-26992 | LOCKWASHER, WATER PUMP BODY SCREW |
| 31 | 12-8M0204649 | WASHER Comment: WATER PUMP BODY FASTENING SCREW AND STUD |
| 32 | 11-35888 | NUT, WATER PUMP FASTENING SCREW |
| 33 | 12-36001 | WASHER, WATER PUMP BODY FASTENING STUD |
| 35 | 25-8M0214918 | RING, RUBBER Comment: CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 36 | 23-29804T | SLEEVE, GUIDE - WATER INLET TUBE |
| 37 | 37641001 | SEAL, EXHAUST ELBOW |
| 38 | 38051 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 39 | 76062A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 40 | 53-29641 | "E" RING, RETAINING - SHIFT SHAFT |
| 41 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 42 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 43 | 26-8M0204708 | OIL SEAL, SHIFT SHAFT BUSHING |
| 44 | 12-77674 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 45 | 78036 | SPACER, LOWER - REVERSE LOCKING Comment: NOT USED WITH FULL POWER TRIM |
| 46 | 43308T1 | CAM, REVERSE LOCKING Comment: NOT USED WITH FULL POWER TRIM |
| 47 | 22-8M0058389 | PLUG, DRAIN (MAGNETIC) |
| 48 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 49 | 760394 | CAM, SHIFT |
| 50 | 30625 | FOLLOWER, CAM |
| 51 | 30624 | SLIDE, CROSS PIN |
| 52 | 24-30622 | SPRING, COMPRESSION - CAM FOLLOWER |
| 53 | 15-30923A1 | SHIM Comment: BEARING OUTER RACE TO HOUSING (.002-3-5-10) |
| 54 | 31-30894A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 55 | 31-30895T | BEARING, ROLLER - FORWARD GEAR |
| 56 | 43-68447T1 | FORWARD GEAR |
| 57 | 52-822539T | RATCHET, SLIDING GEAR |
| 58 | 17-8M0100263 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 59 | 24-30893 | SPRING, RETAINING - CROSS PIN |
| 60 | 44-93003 | SHAFT, PROPELLER |
| 61 | 43-76250T | REVERSE GEAR |
| 62 | 12-76358 | WASHER, THRUST Comment: BEARING CARRIER TO GEAR HOUSING |
| 63 | 25-29976 | "O" RING, BEARING CARRIER |
| 64 | 41529T2 | BEARING CARRIER ASSEMBLY |
| 65 | 31-30956T | BEARING, ROLLER - BEARING CARRIER |
| 66 | 26-8M0204670 | OIL SEAL, BEARING CARRIER |
| 67 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 68 | 14-52700 | TAB WASHER, GEAR HOUSING COVER |
| 69 | 52699 | COVER, GEAR HOUSING |
| 70 | 97-31640Q4 | TRIM TAB, GEAR HOUSING |
| 71 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 72 | 12-45176 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 73 | 11-8M0204653 | NUT Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 74 | 10-65210 | SCREW Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING (1") |
| 75 | 13191Q01 | THRUST HUB |
| 76 | 14-816629Q | TAB WASHER, PROPELLER NUT |
| 77 | 11-52707Q1 | NUT, PROPELLER |
▶HYDRAULIC PUMP AND CONTROL VALVE (41 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 25-48171 | "O"RING Comment: PUMP TO MANIFOLD PLATE (SEE REFERENCE #2) |
| 1 | 92975A32 | HYDRAULIC PUMP ASSEMBLY Comment: SEE C14 FOR BREAKDOWN |
| 2 | 25-48171 | "O" RING, HYDRAULIC PUMP TO MANIFOLD PLATE |
| 3 | 10-79953Q04 | SCREW, FILLER - HYDRAULIC PUMP |
| 4 | 12-191833 | WASHER, SEALING - HYDRAULIC PUMP FILLER SCREW |
| 5 | 10-62269 | SCREW, VENT - HYDRAULIC PUMP |
| 7 | 32979 | BATTERY LEAD (POSITIVE) |
| 8 | 32988 | BATTERY LEAD (NEGATIVE) |
| 9 | 45336 | PLATE, MANIFOLD |
| 10 | 45197A2 | CONTROL VALVE ASSEMBLY |
| 11 | 25-45254 | "O" RING Comment: CONTROL VALVE TO MANIFOLD PLATE (3/4" O.D.) |
| 12 | 25-48171 | "O"RING Comment: CONTROL VALVE TO MANIFOLD PLATE (1/2" O.D.) |
| 13 | 25-45253 | "O"RING Comment: CONTROL VALVE TO MANIFOLD PLATE (5/8" O.D.) |
| 14 | 10-56500 | SCREW Comment: VALVE AND MANIFOLD PLATE TO PUMP (1 1/4") |
| 15 | 13-26992 | LOCKWASHER Comment: CONTROL VALVE AND MANIFOLD PLATE SCREW |
| 17 | 22-46008 | PLUG, CONTROL VALVE (1/2-20") |
| 18 | 84-74023A1 | CONNECTOR AND HARNESS |
| 22 | 45377T | BRACKET, MOUNTING - HYDRAULIC PUMP TO BOAT |
| 23 | 10-35386 | SCREW Comment: MOUNTING BRACKET TO HYDRAULIC PUMP (1") |
| 24 | 13-39107 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 25 | 11-21908 | NUT, MOUNTING BRACKET SCREW |
| 26 | 10-68298 | BOLT, HYDRAULIC PUMP TO BOAT (3 1/4") |
| 27 | 11-82670912 | NUT, HYDRAULIC PUMP BOLT |
| 28 | 89-853654A1 | STARTER SOLENOID |
| 29 | 13-26996,10,10 | LOCKWASHER Comment: STARTER SOLENOID TERMINAL |
| 30 | 10,11-68219 | NUT, STARTER SOLENOID TERMINAL |
| 31 | 13-8M0204647 | LOCKWASHER Comment: STARTER SOLENOID TERMINAL (5/16") |
| 32 | 11-8M0204668 | NUT, STARTER SOLENOID TERMINAL (5/16") |
| 33 | 46265 | BOOT, RUBBER - STARTER SOLENOID TERMINAL |
| 34 | 74407T | BRACKET, MOUNTING - STARTER SOLENOID |
| 35 | 10-21140 | SCREW Comment: MOUNTING BRACKET TO HYDRAULIC PUMP (1/2") |
| 36 | 13-26992 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 37 | 11-24656 | NUT Comment: MOUNTING BRACKET TO HYDRAULIC PUMP THRU BOLT |
| 38 | 269011 | BUMPER, RUBBER - SOLENOID BRACKET |
| 39 | 55992 | BATTERY LEAD (NEGATIVE) |
| 40 | 74406 | BRACKET, MOUNTING - STARTER SOLENOID |
| 41 | 10-69028 | SCREW Comment: MOUNTING BRACKET TO HYDRAULIC PUMP (3/4") |
| 42 | 13-26992 | LOCKWASHER, MOUNTING BRACKET SCREW |
| 43 | 10-34290 | SCREW Comment: STARTER SOLENOID TO MOUNTING BRACKET (5/8") |
| 44 | 13-26992 | LOCKWASHER, STARTER SOLENOID SCREW |
| 45 | 11-21825 | NUT, STARTER SOLENOID SCREW |
▶HYDRAULIC PUMP ASSEMBLY (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92975A32 | HYDRAULIC PUMP ASSEMBLY, COMPLETE |
| 1 | 25-48171 | "O" RING, HYDRAULIC PUMP |
| 2 | 392-7734 | VALVE BODY AND GEAR ASSEMBLY |
| 3 | 392-2618 | CAN, VALVE BODY |
| 4 | 10-20411 | SCREW, VALVE BODY TO RESERVIOR |
| 5 | 392-7735 | SEAL, RESERVOIR TO VALVE BODY AND GEAR |
| 6 | 392-2939 | RESEVOIR ASSEMBLY |
| 7 | 10-62269 | SCREW, VENT - HYDRAULIC PUMP |
| 8 | 10-79953Q04 | SCREW, FILLER - HYDRALIC PUMP |
| 9 | 12-191833 | WASHER, SEALING - FILLER SCREW |
| 10 | 392-2623 | WASHER, THRUST - ARMATURE |
| 11 | 392-2943 | ARMATURE, FIELD AND FRAME |
| 12 | 392-2942 | FIELD AND FRAME ASSEMBLY |
| 13 | 392-2944 | BALL, COMMUTATOR END PLATE |
| 14 | 392-2940 | PLATE ASSEMBLY, COMMUTATOR END |
| 15 | 392-8989 | BRUSH SET, COMMUTATOR END PLATE |
| 16 | 392-2529 | SPRING SET, BRUSH TENSION |
| 17 | 392-2938 | BOLT SET Comment: THUR - PLATE AND FRAME TO RESERVIOR |
| 18 | 13-26996 | LOCKWASHER, THRU BOLT |
▶MISCELLANEOUS PARTS/ACCESSORIES (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-13137A87 | DECAL SET |
▶POWER TRIM CYLINDER REPAIR KITS (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 12 | 64505A1 | RETAINER ASSEMBLY, PISTON |
▶PROPELLERS (RIGHT HAND ROTATION) (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 48-77350A45 | PROPELLER ASSEMBLY (ALUMINUM)(PITCH 23") Comment: 3 BLADES |
▶SWIVEL BRACKET ASSEMBLY (17 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1482-6386A4 | SWIVEL BRACKET ASSEMBLY |
| 2 | 23-69132 | BUSHING, REVERSE LOCK PIVOT SHAFT |
| 3 | 23-69341 | BUSHING, SWIVEL BRACKET |
| 4 | 12-69342 | WASHER, SWIVEL PIN - UPPER |
| 5 | 26-37448 | OIL SEAL, SWIVEL BRACKET |
| 6 | 10-47828 | SCREW, DRIVE - SWIVEL BRACKET |
| 7 | 22-8M0169589 | FITTING, GREASE - SWIVEL BRACKET |
| 10 | 12-37429 | WASHER, SWIVEL PIN - LOWER |
| 11 | 28205T | STRAP STOP Comment: DRIVE SHAFT HOUSING TO SWIVEL BRACKET |
| 12 | 10-28200 | SCREW Comment: STRAP STOP TO DRIVE SHAFT HOUSING (2 7/8") |
| 13 | 11-25269 | NUT, STRAP STOP FASTENING SCREW |
| 14 | 17-73593A2 | SWIVEL PIN AND ARM ASSEMBLY |
| 15 | 73984T | YOKE, BOTTOM |
| 16A | 53-73591 | RETAINING RING, BOTTOM YOKE ATTACHING |
| 17 | 28203 | BUMPER, STEERING ARM |
| 18 | 10-49554 | BOLT, STEERING ARM TO UPPER MOUNT (5 7/8") |
| 19 | 11-8M0204653 | NUT, STEERING ARM BOLT FASTENING |
▶THROTTLE LEVER AND LINK RODS (40 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 79900 | LEVER, THROTTLE |
| 2 | 10-31830 | SCREW, THROTTLE LEVER TO EXHAUST COVER |
| 3 | 12-8M0042641 | WASHER, THROTTLE LEVER SCREW |
| 4 | 23-45818 | BUSHING, THROTTLE LEVER SCREW |
| 5 | 11-8M0204726 | NUT, THROTTLE LEVER SCREW |
| 6 | 37587 | SWIVEL, THROTTLE LEVER TO THROTTLE CABLE |
| 7 | 11-8M0204726 | NUT, THROTTLE CABLE TO SWIVEL |
| 8 | 10-75168 | SCREW, ADJUSTING - THROTTLE LEVER |
| 9 | 11-29598 | NUT, ADJUSTING SCREW |
| 10 | 52023 | CAP, NYLON - ADJUSTING SCREW |
| 11 | 77013A1 | SWIVEL ASSEMBLY, THROTTLE LEVER |
| 12 | 23-26856 | BUSHING, SWIVEL |
| 13 | 12-73288 | WAHSER, SWIVEL |
| 14 | 13-29402 | WAVE WASHER, SWIVEL |
| 15 | 11-45774 | NUT, SWIVEL TO THROTTLE LEVER |
| 16 | 85300 | LINK ROD, THROTTLE |
| 17 | 23-74213 | SWIVEL, LINK ROD TO THROTTLE CAM |
| 18 | 85441 | THROTTLE CAM |
| 19 | 85082 | HOUSING, THROTTLE - UPPER |
| 20 | 24-95721 | SPRING, TORSION - SHAFT |
| 21 | 12-85303 | WASHER, PLASTIC - THROTTLE CAM |
| 22 | 79903F1 | HOUSING, THROTTLE - LOWER |
| 23 | 13-86498 | WAVE WASHER, SHAFT |
| 24 | 87937 | SHAFT, THROTTLE AND SPARK ADVANCE |
| 25 | 10-28239 | SCREW, THROTTLE HOUSING |
| 26 | 12-35462 | WASHER, THROTTLE HOUSING SCREW |
| 27 | 11-8267088 | NUT, THROTTLE HOUSING SCREW |
| 28 | 10-75168 | SCREW, ADJUSTING - LOWER HOUSING (2 1/4") |
| 29 | 11-29598 | NUT, ADJUSTING SCREW |
| 30 | 52023 | CAP, NYLON - ADJUSTING SCREW |
| 31 | 10-25158 | SCREW, ADJUSTING - LOWER HOUSING (1 1/2") |
| 32 | 11-68219 | NUT, ADJUSTING SCREW |
| 33 | 48039 | CAP, NYLON - ADJUSTING SCREW |
| 34 | 77013A1 | SWIVEL ASSEMBLY, SPARK LINK |
| 35 | 23-26856 | BUSHING, SWIVEL |
| 36 | 12-73288 | WASHER, SWIVEL |
| 37 | 13-29402 | WAVE WASHER, SWIVEL |
| 38 | 11-45774 | NUT, SWIVEL |
| 39 | 85301 | SPARK LINK |
| 40 | 74897T | BARREL, SPARK LINK TO TRIGGER |
▶TOP COWL AND SUPPORT BRACKETS (37 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2114-7934T | COWL, TOP (WITHOUT DECALS) |
| 2 | 52733A9 | RETAINER ASSEMBLY, TOP COWL |
| 3 | 35496 | PAD, BUMPER - TOP COWL RETAINER |
| 4 | 10-74824 | SCREW, RETAINER TO TOP COWL (1 1/4") |
| 5 | 13-39107 | LOCKWASHER, RETAINER TO TOP COWL SCREW |
| 6 | 76370 | SHIELD, TOP COWL - REAR |
| 7 | 10-37370 | SCREW, SHIELD TO TOP COWL (5/8") |
| 8 | 13-37371 | LOCKWASHER, SHIELD SCREW |
| 9 | 47341A11 | ROPE, STARTER (FOR MANUAL STARTING ONLY) |
| 10 | 52739 | HINGE, COWL LATCH - TOP COWL |
| 11 | 94918F1 | LEVER, COWL LATCH HINGE |
| 12 | 17-58998 | PIN, ROLL - COWL LATCH LEVER TO HINGE |
| 13 | 55455 | HOOK, TOP COWL LATCH - REAR |
| 14 | 10-22956 | SCREW, REAR HOOK TO TOP COWL (7/8") |
| 15 | 13-26992 | LOCKWASHER, REAR HOOK MOUNTING SCREW |
| 16 | 79897A4 | FRAME, TOP COWL SUPPORT |
| 18 | 46096 | MOUNT, RUBBER - TOP COWL FRAME Comment: (HEAVY DUTY) |
| 19 | 11-35888 | NUT, RUBBER MOUNT TO TOP COWL FRAME |
| 20 | 86472 | BRACKET, TOP COWL SUPPORT - REAR |
| 21 | 31014 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 22 | 13-26992 | LOCKWASHER Comment: RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 23 | 11-29598 | NUT Comment: RUBBBER MOUNT TO REAR SUPPORT BRACKET |
| 24 | 10-37562 | SCREW, REAR BRACKET TO FRAME (1") |
| 26 | 13-8M0204647 | LOCKWASHER, REAR BRACKET SCREW |
| 27 | 10-37562 | SCREW, REAR BRACKET TO BOTTOM COWL (1") |
| 28 | 13-8M0204647 | LOCKWASHER, REAR SUPPORT BRACKET SCREW |
| 29 | 42706A1 | BRACKET ASSEMBLY, TOP COWL - FRONT |
| 30 | 10-60411 | SCREW Comment: FRONT BRACDET TO BOTTOM COWL (1 1/4") |
| 31 | 13-8M0204647 | LOCKWASHER Comment: FRONT SUPPORT BRACKET SCREW |
| 32 | 10-60411 | SCREW Comment: FRONT BRACKET TO TOP COWL FRAME (1 1/2") |
| 33 | 13-8M0204647 | LOCKWASHER, FRONT SUPPORT BRACKET SCREW |
| 34 | 37640 | MOUNT, RUBBER FRONT SUPPORT BRACKET |
| 35 | 13-8M0204647 | LOCKWASHER Comment: RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 36 | 11-28770 | NUT Comment: RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 37 | 87991 | POINTER, TIMING |
| 38 | 10-28636 | SCREW, TIMING POINTER ATTACHING (3/4") |
| 39 | 12-35462 | WASHER, TIMING POINTER SCREW |
▶TRIM CYLINDERS AND HYDRAULIC HOSES (48 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 92194A14 | TRIM CYLINDER ASSEMBLY |
| 1A | 22-8M0169589 | GREASE FITTING |
| 2 | 10-45265 | SCREW, BLEED - SHOCK CYLINDER |
| 3 | 25-45016 | "O" RING, SCHOCK CYLINDER BLEED SCREW |
| 4 | 10-45264 | SCREW Comment: SHOCK CYLINDER TO LOWER SHOCK PIN (1 9/16") |
| 5 | 23-45280 | SPACER, SHOCK CYLINDER - LOWER |
| 6 | 23-94907A1 | BUSHING, RUBBER - SHOCK CYLINDER |
| 7 | 89108A3 | BRACKET, MOUNTING - SHOCK CYLINDER (PORT) |
| 8 | 10-45263 | SCREW Comment: MOUNTING BRACKET TO UPPER SHOCK PIN (2 1/4") |
| 9 | 10-68298 | BOLT Comment: MOUNTING BRACKET TO BOAT TRANSOM (3 1/4") |
| 10 | 12-68410 | WASHER, MOUNTING BRACKET BOLT |
| 11 | 11-82670912 | NUT, MOUNTING BRACKET BOLT |
| 12 | 89807A1 | BRACKET ASSEMBLY, MOUNTING - SHOCK CYLINDER (STARBOARD) |
| 13 | 26-70608 | OIL SEAL, STARBOARD MOUNTING BRACKET |
| 14 | 89290 | PLUNGER, LIMIT SWITCH ACTUATING |
| 15 | 24-95881 | SPRING, TENSION - LIMIT SWITCH PLUNGER |
| 16 | 16-45282 | STUD, MOUNTING BRACKET AND CLAMP BRACKET |
| 17 | 13-8M0204647 | LOCKWASHER Comment: MOUNTING BRACKET TO CLAMP BRACKET STUD |
| 18 | 11-28770 | NUT Comment: MOUNTING BRACKET TO CLAMP BRACKET STUD |
| 19 | 10-45328 | SCREW Comment: SCHOCK CYLINDER TO MOUNTING BRACKET (3 9/16") |
| 20 | 12-37807 | WASHER Comment: SHOCK CYLINDER SCREW (STARBOARD ONLY) |
| 21 | 11-20696 | NUT, SHOCK CYLINDER SCREW |
| 22 | 24-24390 | SPRING, TENSION - ADJUSTING STUD |
| 23 | 16-8M0034461 | STUD, ADJUSTING - CUT-OUT LIMIT SWITCH (15/16") |
| 24 | 11-859124 | NUT, JAM - LIMIT SWITCH ADJUSTING STUD |
| 25 | 99897 | CAM, LIMIT SWITCH ADJUSTING STUD |
| 26 | 86967 | PLATE, RETAINING - LIMIT SWITCH CAM |
| 27 | 10-68513 | SCREW Comment: RETAINING PLATE AND CAM TO SHOCK CYLINDER (3/8") |
| 28 | 13-26996 | LOCKWASHER, RETAINING PLATE AND CAM SCREW |
| 29 | 45326A2 | SWITCH ASSEMBLY, CUT-OUT LIMIT |
| 30 | 23-45354 | BUSHING, RUBBER - CUT-OUT LIMIT SWITCH |
| 31 | 10-47255 | SCREW Comment: CUT-OUT LIMIT SWITCH TO MOUNTING BRACKET (9/16") |
| 32 | 45287 | COVER, LIMIT SWITCH |
| 33 | 27-45275 | GASKET, LIMIT SWITCH COVER |
| 34 | 10-24942 | SCREW Comment: LIMIT SWITCH COVER TO MOUNTING BRACKET (7/16") |
| 35 | 87774A1 | COVER, INLET - TRANSOM |
| 36 | 27-45274 | GASKET, INLET COVER |
| 37 | 25-45507 | GROMMET, RUBBER - INLET COVER |
| 38 | 10-32866 | SCREW, INLET COVER TO BOAT (2") |
| 39 | 12-20878 | WASHER, INLET COVER SCREW |
| 40 | 11-8M0204718 | NUT, INLET COVER SCREW |
| 41 | 32-88005 | HOSE Comment: TRIM - CYLINDER TO CONTROL VALVE (5') - 13/32" O.D. |
| 42 | 32-88006 | HOSE Comment: LIFT - CYLINDER TO CONTROL VALVE (5') - 17/32" O.D. |
| 43 | 23-35977 | GROMMET, RUBBER - LIFT HOSE AND TRIM HOSE |
| 44 | 73519A1 | TILT STOP |
| 45 | 69259 | TUBE, MOUNTING - TILT STOP |
| 46 | 77669 | PIN, MOUNTING TUBE |
| 47 | 18-36002 | COTTER PIN, MOUNTING TUBE PIN |
▶WIRING HARNESS, SWITCH BOX AND IGNITION COIL (40 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 89748T | PLATE, ELECTRICAL MOUNTING |
| 2 | 10-28667 | SCREW, PLATE TO CYLINDER BLOCK (1") |
| 3 | 12-8M0204649 | WASHER, PLATE SCREW |
| 4 | 87-33386A3 | SWITCH ASSEMBLY, MERCURY |
| 5 | 10-25764 | SCREW, MERCURY SWITCH TO PLATE (5/8") |
| 6 | 11-45076 | NUT, WIRE TO MERCURY SWITCH |
| 7 | 8M0058226 | RECTIFIER ASSEMBLY |
| 8 | 10-25764 | SCREW, RECTIFIER TO IGNITION PLATE (5/8") |
| 9 | 11-45076 | NUT, RECTIFIER TERMINALS |
| 10 | 89-853654A1 | SOLENOID, STARTER |
| 11 | 10-38601 | SCREW, STARTER SOLENOID TO PLATE (1/2") |
| 12 | 13-26992 | LOCKWASHER, STARTER SOLENOID SCREW |
| 13 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINALS |
| 14 | 11-68219 | NUT, SOLENOID TERMINALS (10-32) |
| 15 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINALS (5/16") |
| 16 | 11-8M0204668 | NUT, SOLENOID TERMINALS (5/16 - 18) |
| 17 | 84-85532A1 | WIRING HARNESS, INTERNAL |
| 18 | 54-76368 | CLAMP, WIRING HARNESS TO BOTTOM COWL |
| 19 | 10-690201 | SCREW Comment: WIRING HARNESS CLAMP TO BOTTOM COWL (7/8") |
| 20 | 13-26996 | LOCKWASHER, WIRING HARNESS CLAMP SCREW |
| 21 | 12-30164 | WASHER, WIRING HARNESS CLAMP SCREW |
| 22 | 24-28975 | SPRING, GARTER - INTERNAL WIRING HARNESS |
| 23 | 10-98256 | SCREW, GROUND WIRE TO BOTTOM COWL |
| 24 | 13-26992 | LOCKWASHER, GROUND WIRE SCREW |
| 25 | 332-7778A12 | SWITCH BOX ASSEMBLY |
| 26 | 10-26251 | SCREW, SWITCH BOX TO IGNITION COIL (7/8") |
| 27 | 84-62310A3 | CABLE ASS'Y Comment: SWITCH BOX TO SWITCH BOX (WHITE AND BLACK) |
| 28 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 29 | 339-832757A4 | COIL ASSEMBLY, IGNITION |
| 30 | 43542 | COVER, IGNITION COIL |
| 31 | 10-88856 | SCREW, IGNITION COIL COVER (2") |
| 32 | 11-45076 | NUT, IGNITION COIL TERMINAL |
| 33 | 84-60466A1 | CABLE ASSEMBLY, IGNITION COIL (BLACK) |
| 34 | 84-813715A1 | CABLE, HIGH TENSION |
| 35 | 332-2854T01 | BOOT, HIGH TENSION CABLE |
| 36 | 85-63709A1 | PROTECTOR, HIGH TENSION CABLE |
| 37 | 33-896329827 | SPARK PLUG (CHAMPION #L76-V) |
| 38 | 84-85537A1 | HARNESS ASSEMBLY Comment: COIL TO SWITCH BOX (#1,3 AND 5) |
| 39 | 54-63153 | CLIP, HARNESS TO COIL COVER |
| 40 | 85-78866 | INSULATOR, STARTER SOLENOID |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 90 (6 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
- Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
- Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
Productos vistos recientemente
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
- Choosing a selection results in a full page refresh.