Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
🔎 Mercury 70 (3 CYL.) Reference Library — Exploded parts diagrams (20 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 70 (3 CYL.) is a 2-Stroke, 3-Cylinder outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
| Specification | Value |
|---|---|
| Engine Type | 2-Stroke, 3-Cylinder |
| Horsepower | 70 HP |
| Displacement | 1165 cc |
| Bore x Stroke | 86 mm x 67 mm |
| Spark Plug (Type & Gap) | NGK BUHW-2 |
| Engine Oil Capacity | — |
| Recommended Engine Oil | Quicksilver Premium 2-Cycle TC-W3 |
| Gear Case Oil Capacity | — |
| Idle Speed (in gear) | 650–700 RPM (in gear) |
| Full Throttle RPM Range | 5000-5500 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 70 (3 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 70 (3 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 812953 | REPAIRE PARTS KIT Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 1 | 1379-6071A23 | CARBURETOR ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 2 | 1399-4215 | JET, VENT BOWL (.066) |
| 3 | 1395-83181 | INLET NEEDLE AND SEAT |
| 5 | 1395-6685 | VENTURI |
| 11 | 19273 | FLAOT |
| 12 | 1395-6488 | FUEL BOWL |
| 15 | 1395-6199 | PLUG, MAIN JET |
| 16 | 1395-5815 | JET, MAIN (.086) |
| 20 | 1395-4807 | SHAFT, THROTTLE |
| 21 | 1395-6196 | VALVE, THROTTLE |
| 23 | 1395-6204 | SEAL, THROTTLE SHAFT |
| 24 | 1395-6203 | WASHER, THROTTLE SHAFT |
| 26 | 1395-6198 | VALVE ASSEMBLY, ENRICHMENT |
| 29 | 27-733771 | GASKET,CARBURETOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 60549A7 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, HARNESS LEAD TO CHOKE SOLNOID |
| 3 | 11-68219 | NUT, HARNESS LEAD TO SOLENOID ATTACHING |
| 4 | 10-33524 | SCREW, CHOKE SOLENOID ATTACHING (5/8") |
| 5 | 11-29250 | NUT, CHOKE SOLENOID ATTACHING SCREWS |
| 6 | 89008A2 | PLUNGER ASSEMBLY, CHOKE SOLENOID |
| 7 | 76076A1 | CHOKE ROD |
| 8 | 90242A1 | CHOKE KNOB ASSEMBLY |
| 9 | 10-77137 | SCREW, WIRE TO CHOKE KNOB |
| 10 | 25-20116 | GROMMET, CHOKE KNOB |
| 13 | 1379-6071A23 | CARBURETOR ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 14 | 10-52743 | SCREW, CARBURETOR TO CRANKCASE (3 3/4") |
| 15 | 77583 | LEVER, THROTTLE |
| 16 | 10-60293 | SCREW, LEVER TO CARBURETOR |
| 17 | 60292A1 | COUPLING ASSEMBLY |
| 18 | 28-89694 | INSERT, THROTTLE SHAFT COUPLING |
| 19 | 11-92500 | WASHER, ROLLED-COUPLING |
| 20 | 10-60293 | SCREW, ROLLED WASHER TO COUPLING |
| 21 | 76904A1 | PLATE ASSEMBLY, CARBURETOR |
| 22 | 71090 | SEAL, CARBURETOR PLATE |
| 23 | 27-73398 | GASKET, CARBURETOR PLATE Comment: UNITED STATES 5128279 AND BELOW AUSTRALIA 8056219 AND BELOW BELGIUM 9207525 AND BELOW CANADA 7110997 AND BELOW |
| 24 | 27-76952 | GASKET, CARBURETOR PLATE TO CARBURETOR Comment: UNITED STATES 5128279 AND BELOW AUSTRALIA 8056219 AND BELOW BELGIUM 9207525 AND BELOW CANADA 7110997 AND BELOW |
| 25 | 10-20367 | SCREW, PLATE TO CARBURETOR (7/16") |
| 26 | 12-8M0204649 | WASHER, PLATE SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY Comment: WASHER ATTACHED WITH A SCREW |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY Comment: WASHER ATTACHED WITH A SCREW |
| 2A | 10-78495 | SCREW Comment: WASHER TO THUMB SCREW -WASHER ATTACHED WITH A SCREW |
| 2B | 12-78493 | WASHER Comment: THUMB SCREW -WASHER ATTACHED WITH A SCREW |
| 3 | 75043 | CAP Comment: THUMB SCREW -WASHER ATTACHED WITH A SCREW |
| 4 | 8M0041936 | TUBE, TILT-CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLAMP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC-TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKER (9 1/2") |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKER STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 13 | 32-28052 | SLEEVE, RUBBER-TILT LOCK PIN BUMPER |
| 14 | 10-87302 | BOLT Comment: CLAMP BRACKET TO BOAT TRANSOME (5")-NEW STYLE CLAMP BRCKET |
| 15 | 12-68300 | WASHER, CLAMP BRACKER BOLT |
| 16 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 17 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 18 | 1490-8599A6 | SWIVEL BRACKET ASSEMBLY Comment: (LONG SHAFT) |
| 19 | 26-32911 | OIL SEAL, SWIVEL BRACKER |
| 20 | 10-47828 | SCREW, DRIVE-SWIVEL BRACKER Comment: UNITED STATES 5285533 AND BELOW AUSTRALIA 8059594 AND BELOW BELGIUM 9225255 AND BELOW CANADA 7129887 AND BELOW |
| 21 | 22-8M0169589 | FITTING, GREASE |
| 21A | 26-22734 | OIL SEAL, SWIVEL BRACKET (TILT LOCK) Comment: UNITED STATES 5285534 AND UP AUSTRALIA 8059595 AND UP BELGIUM 9225256 AND UP CANADA 7129888 AND UP |
| 22 | 76386 | TILT LOVK, STARBOARD |
| 23 | 76385T | TILT LOCK, PORT |
| 24 | 47802 | TUBE, TILT LOCK Comment: UNITED STATES 5285533 AND BELOW AUSTRALIA 8059594 AND BELOW BELGIUM 9225255 AND BELOW CANADA 7129887 AND BELOW |
| 24A | 79659 | CIOUPLING, TILT LOCK Comment: UNITED STATES 5285534 AND UP AUSTRALIA 8059595 AND UP BELGIUM 9225256 AND UP CANADA 7129888 AND UP |
| 24B | 25-67202 | "O"RING, TILT LOCK LEVER Comment: UNITED STATES 5285534 AND UP AUSTRALIA 8059595 AND UP BELGIUM 9225256 AND UP CANADA 7129888 AND UP |
| 25 | 18-47959 | COTTER PIN, TILT LOCK |
| 26 | 23-71574 | BUSHING, TILT LOCK TUBE Comment: UNITED STATES 5285533 AND BELOW AUSTRALIA 8059594 AND BELOW BELGIUM 9225255 AND BELOW CANADA 7129887 AND BELOW |
| 27 | 13-69150 | WASHER, WAVE-TILT LOCK TUBE Comment: UNITED STATES 5285533 AND BELOW AUSTRALIA 8059594 AND BELOW BELGIUM 9225255 AND BELOW CANADA 7129887 AND BELOW |
| 28 | 69540A4 | SWIVEL PIN AND STEERING ARM ASSEMBLY Comment: (LONG SHAFT) YOKE IS ATTACHED WITH A RETAINING RING |
| 29 | 30711 | BUMPER, STEERING ARM |
| 30 | 10-66897 | BOLT, UPPER MOUNT TO SWIVEL PIN (7/16X5 1/4") |
| 31 | 17-25598 | PIN, REVERSE LOCK SPRING ATTACHING |
| 32 | 12-26837 | WASHER, SWIVEL PIN TO BOTTOM YOKE (.065) |
| 33 | 77416T1 | YOKE BOTTOM Comment: YOKE IS ATTACHES WITH A RETAINING RING |
| 34 | 53-77415 | RETAINING RING, BOTTOM YOKE Comment: YOKE IS ATTACHES WITH A RETAINING RING |
| 35 | 55-696531 | PIN, LOWER SHOCK MOUNTING |
| 36 | 87432 | REVERSE LOCK |
| 37 | 24-78203A2 | SPRING AND PIN ASSEMBLY Comment: REVERSE LOCK TENSION |
| 38 | 56349 | SHAFT, REVERSE LOCK PIVOT |
| 39 | 23-69132 | BUSHING, REVERSE LOCK PIVOT SHAFT |
| 40 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 41 | 23-73203 | SPACER Comment: UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 42 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 43 | 55-58780A7 | SHOCK ABSORBER |
| 44 | 23-32171 | BUSHING, RUBBER-SHOCK ABSORBER (UPPER) |
| 45 | 23-28198 | BUSHING, RUBBER-SHOCK ABSORBER (LOWER) |
| 46 | 12-69374 | WASHER Comment: UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 47 | 10-69375 | SCREW Comment: UPPER AND LOWER SHOCK MOUNTING PIN ( 3/4") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 73641A1 | BRACKET, COWL SUPPORT-TOP |
| 2 | 62444 | SEAL Comment: RUBBER- TOP BRACKET AND COVER MOUNTING PLATE |
| 3 | 79652 | CLIP, TOP COWL SUPPORT BRACKET Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 4 | 10-48408 | SCREW, CLIP TO TOP COWL SUPPORT (1/2") |
| 6 | 79490 | SHIELD, FLYWHEEL Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 7 | 10-37656 | SCREW, SHIELD TO TOP SUPPORT BRACKET (5/8") |
| 8 | 10-48408 | SCREW, SHIELD TO TOP SUPPORT BRACKET (1/2") |
| 9 | 74510A2 | BRACKET, COWL SUPPORT - REAR |
| 10 | 698761 | SEAL, REAR BRACKET AND TOP BRACKET |
| 11 | 90435 | MOUNT Comment: RUBBER-BRACE TO REAR TO REAR SUPPORT BRACKET |
| 12 | 12-69057 | WASHER Comment: RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 13 | 11-8M0207775 | NUT Comment: RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 14 | 269011 | STOP, RUBBER-RAR SUPPORT BRACKET |
| 15 | 60116 | BRACE, REAR COWL SUPPORT BRACKET (TOP) |
| 16 | 10-76596 | SCREW Comment: SUPPORT BRK. BRACE TO CYL. BLOCK COVER (1 1/4") |
| 17 | 90435 | MOUNT Comment: RUBBER-FRONT SUPPORT BRACKET TO BRACKET |
| 19 | 11-36069 | NUT Comment: RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 20 | 71097 | BRACKET, RUBBER MOUNT |
| 21 | 10-824941 | SCREW, BRACKET TO CRANKCASE (3/4") |
| 22 | 79489 | ATTENUATOR, SOUND Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 23 | 54-28700 | CLAMP, WIRES TO SOUND ATTENUATOR |
| 24 | 10-98253 | SCREW, CLAMP SCREW |
| 27 | 75841 | COVER, MANUAL CHOKE |
| 28 | 10-38055 | SCREW, COVER TO TOP COVER |
| 29 | 12-8M0204666 | WASHSER, COVER SCREW |
| 30 | 73986 | AIR MANIFOLD |
| 31 | 10-69093 | SCREW, AIR MANIFOLD TO SOUND ATTENUATOR |
| 34 | 90435 | MOUNT, RUBBER-FRONT SUPPORT TO STARTER MOTOR COVER |
| 37 | 11-36069 | NUT, RUBBER MOUNT ATTACHING |
| 38 | 76410 | SEAL, FUEL CONNECTOR-SOUND ATTENUATOR |
| 39 | 21-428671 | CONNECTOR, ATTENUATOR |
| 40 | 32-9938779 | TUBE, VENT (LOWER) |
| 41 | 22-15133 | ELBOW, CRANKCASE VENT (PRESS IN) |
| 42 | 76578 | COVER, SOUND ATTENUATOR (FRONT) |
| 43 | 27-76579 | GASKET, FRONT COVER Comment: UNITED STATES 5128279 AND BELOW AUSTRALIA 8056219 AND BELOW BELGIUM 9207525 AND BELOW CANADA 7110997 AND BELOW |
| 45 | 10-37571 | SCREW Comment: FRONT COVER TO SOUND ATTENUATOR (1/2") |
| 46 | 19-73336 | PLUG, FRONT COVER |
| 47 | 76251A1 | PLATE ASSEMBLY, FRONT COVER MOUNTING |
| 48 | 76264 | LATCH, FRONT COVER ATTACHING |
| 49 | 24-60295 | SPRING, FRONT COVER LATCH |
| 50 | 10-28635 | SCREW Comment: COVER PLATE TO SUPPORT BRACKET (5/8") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2142-6228A1 | COWL ASSEMBLY (STARBOARD) - WITHOUT DECALS |
| 2 | 26-60297 | SEAL, FUEL CONNECTOR-COWL |
| 3 | 2141-6227A1 | COWL ASSEMBLY (PORT)-WITHOUT DECALS |
| 4 | 26-60298 | SEAL, CONTROL CABLES-COWL |
| 5 | 89717T | BRACKET, COWL SEALING-REAR |
| 6 | 698761 | SEAL, REAR BRACKET |
| 7 | 90980 | BRACKET, COWL HINGE |
| 8 | 10-75794 | SCREW Comment: HINGE BRACKET TO REAR BRACKET-UPPER (1 1/8") |
| 8A | 75805 | CAP,HINGE BRACKET SCREW (UPPER) |
| 9 | 13-26992 | LOCKWASHER, HINGE BRACKET SCREW |
| 10 | 12-75806 | WASHER, HINGE BRACKET SCREW (UPPER) |
| 11 | 90979 | PIN, COWL HINGE |
| 12 | 10-28782 | SCREW, PIN TO COWL (7/8") |
| 13 | 13-8M0204647 | LOCKWASHER,PIN ATTACHING SCREW |
| 14 | 46785A5 | COWL LATCH ASSEMBLY |
| 15 | 62628 | BARRELL, COWL LATCH |
| 16 | 10-31312 | SCREW,LATCH ASSEMBLY TO BARREL (7/8") |
| 17 | 15222 | BAR, ADJUSTMENT-COWL LATCH |
| 18 | 62629 | BARREL, COWL LATCH |
| 19 | 24-62624 | SPRING, TENSION - COWL LATCH |
| 20 | 12-30164 | WASHER, ADJUSTMENT BAR TO BARREL |
| 21 | 11-859124 | NUT, ADJUSTMENT BAR TO BARREL |
| 22 | 2143-7254A3 | FRONT COVER ASSEMBLY (WITHOUT DECALS) Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 23 | 795511 | BLANKET, SOUND ABSORBINS Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 24 | 61158T | HOOK, FRONT COVER FASTENING |
| 25 | 10-69570 | SCREW, FASTENING HOOK TO FRONT COVER (3/4") |
| 26 | 47341A11 | STARTER ROPE ASSEMBLY Comment: (FOR MANUAL STARTING ONLY) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| -- | 27-88449A32 | GASKET SET |
| 1 | 462-8839A2 | CRANKSHAFT ASSEMBLY Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 2 | 30-64424T | BEARING, BALL-LOWER AND UPPER |
| 3 | 15-22369A1 | SHIM, LOWER BEARING TO CRANKSHAFT |
| 4 | 60834A3 | CARRIER ASSEMBLY, "O"RING-METAL SEAL CARRIER PRESSED IN CRAN Comment: METAL SEAL CARRIER PRESSED IN CRANKSHAFT |
| 5 | 64254001 | "O"RING, CARRIER Comment: METAL SEAL CARRIER PRESSED IN CRANKSHAFT |
| 6 | 542-7509A3 | MAIN BEARING ASSEMBLY ( VALVE TYPE) |
| 7 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 8 | 17-60282 | DOWEL PIN (STEPPED) |
| 9 | 17-65855 | DOWEL PIN, REED STOP |
| 10 | 34-66051A1 | REED SET, MATCHED-MAIN BEARING |
| 11 | 34-65946 | REED STOP |
| 12 | 10-77280 | SCREW, REED STOP MOUNTING (9/16") |
| 13 | 11-20110 | NUT, REED STOP MOUNTING SCREW |
| 14 | 10-45775 | SCREW, MAIN BEARING CLAMPING (9/16") |
| 15 | 11-45774 | NUT, MAIN BEARING SCREW CLAMPING |
| 16 | 26113T | RACE, OUTER(PAIR) |
| 17 | 53-26933 | RING, SNAP-OUTER RACE CLAMPING |
| 18 | 29-714221 | BEARING, NEEDLE |
| 19 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 20 | 53-857196 | LOCK RING, PISTON PIN |
| 21 | 39-78816A12 | RING PISTON |
| 22 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 23 | 10-54803 | SCREW, CAP TO CONNECTING ROD (1 1/2") |
| 24 | 11-49091 | NUT, CONNECTING ROD SCREW |
| 25 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 26 | 29-8M0214934 | BEARING, NEEDLE-PISTON PIN |
| 27 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 865-8362A11 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 1A | 66517 | RESTRICTOR, CRANKCASE BLEED |
| 2 | 27-60286 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 16-68201 | STUD Comment: CRANKCASE TO DRIVE SHAFT HOUSING (2 1/4") |
| 4 | 17-43044 | DOWEL PIN, CRANKCASE TO CYLINDER BLOCK |
| 5 | 17-20323 | DOWEL PIN, CYLINDER BLOCK TO MAIN BEARING |
| 6 | 16-68203 | STUD Comment: BLOCK TO DRIVER SHAFT HOUSING (4") |
| 7 | 16-68167 | STUD Comment: BLOCK TO DRIVE SHAFT HOUSING (2 9/16")-TRANSFER SIDE |
| 8 | 76975 | COVER, STARTER MOTOR TO CRANKCASE (BOTTOM) Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 9 | 10-815549 | SCREW, STARTER MOTOR COVER (2") |
| 11 | 79735A1 | COVER, STARTER MOTOR TO CRANKCASE (TOP) |
| 12 | 10-35385 | SCREW, STARTER MOTOR COVER (1 3/4") |
| 13 | 10-35385 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 3/4") |
| 14 | 10-73657 | SCREW, CRANKCASE TO CYLINDER BLOCK (1 1/2") |
| 15 | 10-22039 | SCREW, CRANKCASE TO CYLINDER BLOCK (2 3/4") |
| 16 | 12-26020 | WASHER Comment: CRANKCASE TO CYLINDER BLOCK SCREW (BOTTOM) |
| 17 | 11-29250 | NUT Comment: CRANKCASE TO CYLINDER BLOCK SCREW ( BOTTOM) |
| 18 | 79736 | INDICATOR, TIMING |
| 19 | 10-58414 | SCREW, INDICATOR TO STARTER COVER |
| 19A | 12-56720 | WASHER, INDICATOR SCREW |
| 20 | 1161-6357A1 | END CAP ASSEMBLY, UPPER |
| 21 | 25-64966 | "O"RING, END CAP |
| 22 | 26-41953 | OIL SEAL, END CAP |
| 23 | 10-812618 | SCREW, UPPER END CAP MOUNTING (1") |
| 24 | 15-73644A1 | SHIM, UPPER END CAP (.006-8-10) |
| 25 | 1144-6691A1 | END CAP ASSEMBLY, LOWER Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 26 | 25-32546 | "O"RING, END CAP |
| 27 | 26-41953 | OIL SEAL, END CAP |
| 28 | 10-30225 | SCREW, LOWER END CAP MOUNTING (1") |
| 29 | 15-20085A1 | SHIM, LOWER END CAP (.002-3-5-10) |
| 30 | 22-291112 | CONECTOR, HOSE CYLINDER BLOCK Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 31 | 32-774572 | HOSE, TELL TALE (15") |
| 32 | 23-90882 | SLEEVE, TELL TALE HOSE |
| 33 | 69555001 | NOZZLE, TELLTALE-REAR SUPORT BRACKET |
| 34 | 54-70705 | CLAMP, TELL TALE NOZZLE |
| 35 | 10-48408 | SCREW, TELLTALE CLAMP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1593-7513A12 | DRIVE SHAFT HOUSING ASSEMBLY (LONG SHAFT) Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 2 | 19-64649 | PLUG, PLASTIC-TRIM TAB SCREW HOLE |
| 3 | 16-8M0022145 | STUD Comment: DRIVE SHAFT HOUSING TO GEAR HOUSING (1 3/4") |
| 4 | 16-57935 | STUD Comment: DRIVE SHAFT HOUSING TO GEAR HOUSING (3") |
| 5 | 12-65791 | WASHER Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS |
| 6 | 11-8M0204653 | NUT Comment: GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS (7/16") |
| 7 | 47836 | ROD, PUSH-REVERSE LOCK (LONG SHAFT) |
| 8 | 11-28770 | NUT, JAM-PUSH ROD |
| 9 | 47837 | ROD END, PUSH ROD |
| 10 | 24-78203A2 | PIN, PUSH ROD TO REVERSE LOCK |
| 11 | 18-25191 | COTTER PIN, PUSH ROD PIN |
| 12 | 933361 | GUIDE, PUSH ROD |
| 13 | 35474T | COVER, LOWER MOUNT CLAMP |
| 14 | 10-29722 | SCREW, COVER TO LOWER MOUNT CLAMP |
| 15 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 16 | 69592F1 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 17 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING (7/8") |
| 18 | 24-35522 | SPRING, TENTION-LOWER MOIUNT CLAMP |
| 19 | 75304T1 | MOUNT, RUBBER-LOWER |
| 20 | 10-75284 | SCREW, LOWER MOUNT (5 1/2") |
| 21 | 12-28051 | WASHER, LOWER MOUNT SCREW |
| 22 | 12-28053 | WASHER, RUBBER - LOWER MOUNT SCREW |
| 23 | 12-61709 | WASHER, LOWER MOUNT SCREW |
| 24 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 25 | 923373 | MOUNT, RUBBER-UPPER |
| 25A | 25-65936 | "O"RING, UPPER MOUNT Comment: UNITED STATES 4977156 AND BELOW AUSTRALIA 8050199 AND BELOW BELGIUM 9196960 AND BELOW CANADA 7110997 AND BELOW |
| 26 | 96401 | SEAL, BELLOWS-UPPER MOUNT Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 27 | 79680A1 | COVER, UPPER MOUNT- OUTSIDE HALF Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 28 | 79681 | COVER, UPPER MOUNT-INSIDE HALF Comment: UNITED STATES 4977157 AND UP AUSTRALIA 8050200 AND UP BELGIUM 9196961 AND UP CANADA 7110998 AND UP |
| 29 | 10-69029 | SCREW, UPPER MOUNT COVER-REAF (1 3/4") Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 30 | 10-67916 | SCREW, UPPER MOUNT COVER-FRONT (2") Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 30A | 12-8M0204649 | WASHER, UPPER MOUNT COVER SCREW Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 31 | 11-36069 | NUT, UPPER MOUNT COVER SCREW Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 32 | 12-27727 | WASHER, UPPER MOUNT BOLT (4/16 ID) |
| 33 | 12-66966 | WASHER, RUBBER-UPPER MOUNT BOLT |
| 34 | 12-30514 | WASHER, UPPER MOUNT BOLT (7/16 ID ) |
| 35 | 11-8M0204653 | NUT, UPPER MOUNT BOLT |
| 36 | 27-385011 | GASKET Comment: EXHAUST EXTENTION PLATE TO DRIVE SHAFT HOUSING |
| 37 | 11-64809 | NUT Comment: POWDERHEAD TO DRIVE SHAFT HOUSING STUDS (5/16") |
| 38 | 695441 | TUBE, EXHAUST(LONG SHAFT) |
| 39 | 32-45679 | TUBE, WATER INLET (LONG SHAFT) |
| 40 | 23-23651 | SLEEVE, WATER INLET TUBE |
| 41 | 38157 | SEAL, TRIM COVER TO DRIVE SHAFT HOUSING |
| 42 | 38154 | STRIP, RETAINING-TRIM COVER SEAL (SIDE ) |
| 43 | 38158 | STRIP, RETAINING-TRIM COVER SEAL (REAR) |
| 44 | 10-48408 | SCREW Comment: RETAINING STRIP TO DRIVE SHAFT HOUSING (SELF TAPPING) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 865-8362A11 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 2 | 65848 | CARRIER, GROMMET Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 3 | 25-64872 | GROMMET, POPPET RELIEF VALVE Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 4 | 86596 | POPPET, RELIEF VALVE Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 5 | 24-64878 | SPRING Comment: COMPRESSION-POPPET RELIEF VALVE UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 6 | 648771 | DIAPHRAM, POPPET RELIEF Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 7 | 12-76451 | WASHER, DIAPHRAM Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 8 | 10-69570 | SCREW Comment: WASHER AND DIAPHRAM TO POPPET VALVE |
| 9 | 99523A1 | COVER ASSEMBLY, TRANSFER PASSSAGE |
| 10 | 27-768621 | GASKET, TRANSFER PASSAGE COVER |
| 11 | 10-38837 | SCREW Comment: TRANSFER PASSAGE COVER MOUNTING (1 1/8") |
| 12 | 1025-8116A1 | COVER, CYLINDER BLOCK |
| 13 | 27-88449 | GASKET, CYLINDER BLOCK COVER Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 14 | 10-28667 | SCREW, CYLINDER BLOCK COVER MOUNTING (1 1/8") |
| 15 | 22-328022 | PLUG, CYLINDER BLOCK COVER |
| 16 | 27-695252 | GASKET, BAFFLE PLATE TO CYLINDER BLOCK |
| 17 | 27-703351 | GASKET, BAFFLE PLATE TO CYLINDER BLOCK COVER |
| 18 | 69579 | PLATE, BAFFLE-EXHAST MANIFOLD |
| 19 | 75692 | THERMOSTAT Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 20 | 27-8M0204714 | GASKET, THERMOSTAT |
| 21 | 27-695242 | GASKET, PLATE TO EXHAUST MANIFOLD COVER |
| 22 | 78529 | COVER, EXHAUST MANIFOLD Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 23 | 10-38837 | SCREW, PLATE AND MANIFOLD COVER MOUNTING (1 1/8") |
| 24 | 10-74824 | SCREW, PLATE AND MANIFOLD COVER MOUNTING (1 1/4") |
| 25 | 10-70602 | SCREW, PLATE/MANIFOLD COVER MOUNTING (2") |
| 26 | 87-33386A3 | SWITCH,MERCURY |
| 27 | 10-37655 | SCREW, MERCURY SWITCH TO CRANKCASE (1/2") |
| 28 | 17-36242 | PIN, ROLL-MERCURY SWITCH |
| 29 | 61990 | STA-STRAP, MERCURY SWITCH LEAD |
| 30 | 32-9938779 | HOSE, CRANKCASE BLEED (12") |
| 31 | 21-42863 | FITTING, CRANKCASE BLEED |
| 32 | 22-56759 | FITTING, VCRANKCASE BLEED (PRESS IN) |
| 33 | 54-648552 | CLIP, BLEED HOSE |
| 34 | 10-62568 | SCREW, BLEED HOSE CLIP |
| 35 | 8M0084613 | "C"WASHER, BLEED HOSE CLIP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 11-52901 | NUT, FLYWHEEL |
| 2 | 12-33001 | WASHER, FLYWHEEL NUT |
| 3 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 4 | 248-8722A5 | FLYWHEEL ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 5 | 10-68997 | SCREW, PLATE/HUB TO FLEXIBLE PLATE (3/4") |
| 6 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL (5/8") |
| 7 | 889351 | PLATE, SWITCH BOX |
| 8 | 25-57009001 | GROMMET, SWITCH BOX PLATE |
| 9 | 10-824941 | SCREW Comment: SWITCH BOX PLATE TO CYLINDER BLOCK (3/4") |
| 10 | 12-56720 | WASHER, SWITCH BOX PLATE SCREW |
| 11 | 332-7778A12 | SWITCH BOX ASSEMBLY |
| 12 | 10-26251 | SCREW, SWITCH BOX TO PLATE (13/16") |
| 13 | 46933A6 | WIRE ASSEMBLY, SWITCH BOX SCREW |
| 14 | 11-45076 | NUT, SWITCH BOX TERMINAL |
| 15 | 84-68896A1 | WIRE ASSEMBLY Comment: SWITCH BOX TO COIL (GREEN/RED) |
| 16 | 84-60466A17 | WIRE ASSEMBLY, SWITCH BOX TO COIL (BLACK) |
| 17 | 73439 | PLATE, MOUNTING-IGNITION COIL |
| 18 | 339-832757A4 | IGNITION COIL ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 19 | 11-45076 | NUT, IGNITION COIL TERMINAL |
| 20 | 43542 | COVER, IGNITION COIL |
| 21 | 10-46368 | SCREW, COVER TO MOUNTING PLATE (2") |
| 22 | 398-5704A7 | STATOR ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 23 | 10-63136 | SCREW, STATOR TO UPPER END CAP (7/8") |
| 24 | 96455A8 | TRIGGER PLATE ASSEMBLY |
| 25 | 54-28700 | CLAMP, STATOR LEADS ATTACHING |
| 26 | 10-98253 | SCREW, CLAMP TO CRANKCASE (1/2") |
| 27 | 84-813715A1 | WIRE ASSEMBLY, SPARK PLUG |
| 28 | 332-2854T01 | BOOT, IGNITION COIL END |
| 29 | 33-14103550 | SPARK PLUG Comment: (CHAMPION #QL-76V) - CANADA AND BELGIUM |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 76575A9 | FUEL PUMP ASSEMBLY |
| 2 | 21-8M0084275 | CHECK VALVE ASSEMBLY |
| 3 | 55278A4 | DIAPHRAM KIT |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING (3/8") |
| 8 | 10-86885 | SCREW, PUMP MOUNTING (1 5/8") |
| 9 | 22-328022 | PLUG, PIPE-FUEL PUMP |
| 10 | 32-774572 | HOSE ASSEMBLY Comment: FUEL PUMP TO EXHAST PLATE (9 1/2") |
| 11 | 22-996642 | ELBOW, HOSE TO EXHAST PLAT Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 12 | 32-774572 | HOSE ASSEMBLY, GUEL PUMP TO NOZZLE (10") Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 12A | 23-90882 | SLEEVE, TELL TALE HOSE Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 13 | 54-68725 | CLAMP, HOSE TO FUEL PUMP AND FITTING Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 14 | 69555001 | NOZZLE, TELL TALE-REAR SUPPORT BRACKET Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 15 | 54-70705 | CLAMP, TELL TALE NOZZLE Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 16 | 10-48408 | SCREW, TELL TALE CLAMP Comment: UNITED STATES 4825248 AND BELOW AUSTRALIA 8049849 AND BELOW BELGIUM 9176875 AND BELOW CANADA 7110247 AND BELOW |
| 17 | 22-64705 | FITTING, FUEL PUMP ( INLET) |
| 18 | 32-8M0108355 | FUEL LINE, ADAPTOR TO FUEL PUMP ( 12") |
| 19 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 20 | 22-63187 | FITTING, FUEL LINE TO ADDAPTOR |
| 21 | 22833 | ADAPTOR, CHECK UNIT ( FUEL PUMP) |
| 22 | 23069 | STEM, CHECK UNIT ADAPTOR |
| 23 | 25-16524 | "O"RING, ADAPTOR STEM |
| 24 | 24-23067T | SPRING, ADAPTOR STEM |
| 25 | 30188 | CUP WASHER, ADAPTOR |
| 26 | 10-76596 | SCREW, ADAPTOR TO SUND ATTENTUATOR ( 1 1/4") |
| 28 | 32-8M0108355 | FUEL LINE, FUEL PUMP/FUEL FILTER COVER (3 1/2") |
| 29 | 76221 | BASE, FUEL FILTER AND COVER |
| 30 | 10-22698 | SCREW Comment: FILTER BASE TO FRANSFER PASSAGE CAVER (1 3/4") |
| 31 | 12-34437 | WASHER, FILTER BASE SCREW |
| 32 | 35-59072 | FILTER, FUEL |
| 33 | 25-35480 | "O"RING, FILTER COVER |
| 34 | 35-91078A1 | COVER, FILTER |
| 35 | 10-37370 | SCREW, FILTER COVER FASTENING (5/8") |
| 36 | 27-25848 | GASKET, FILTER COVER FASTENING SCREW |
| 37 | 22-19688 | FITTING, BASE |
| 38 | 32-8M0108355 | FULE LINE, BASE TO LOWER CARBURETOR (9 1/2") |
| 39 | 22-64706001 | TEE, LOWER CARBURETOR |
| 40 | 32-8M0108355 | FUEL LINE, CARBURETOT TO CARBURETOR (3") |
| 41 | 22-19688 | FITTING, UPPER CARBURETOR |
| 42 | 22-70007 | FITTING, FUEL PUMP ( OUTLET) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 1643-6038A6 | GEAR HOUSING ASSEMBLY |
| 2 | 17-8M0084726 | PIN, DOWEL-GEAR HOUSING |
| 3 | 16-33778 | STUD, WATER PUMP BODY/BASE TO GEAR HOUSING (2 5/8) |
| 4 | 16-8M0034453 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (2 3/16") |
| 5 | 31-62091T | BEARING, ROLLER-DRIVE SHAFT |
| 6 | 72849A1 | SCREEN, WATER INTAKE-PORT (LONG SHAFT) |
| 7 | 10-36070 | SCREW, SCREENS TO GEAR HOUSING (1 1/4") |
| 8 | 11-859124 | NUT,SCREEN TO GEAR HOUSING SCREW |
| 9 | 92815 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 10 | 37721001 | SEAL, EXHAUST TUBE |
| 11 | 43-60245 | GEAR, PINION - DRIVE SHAFT |
| 12 | 11-55910 | NUT, PINION GEAR TO DRIVE SHAFT |
| 13 | 27-32771 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 14 | 25-26855 | "O" RING, WATER PUMP BASE |
| 15 | 46-73640T01 | WATER PUMP BASE ASSEMBLY |
| 16 | 26-79831 | OIL SEAL, WATER PUMP BASE |
| 17 | 26-90562 | OIL SEAL, WATER PUMP BASE |
| 18 | 17-35973 | DOWELL PIN, WATER PUMP BASE TO WATER PUMP BODY |
| 19 | 27-19553 | GASKET, LOWER - WATER PUMP BASE TO FACE PLATE |
| 20 | 32768 | PLATE, FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 21 | 27-19551 | GASKET, UPPER - FACE PLATE TO WATER PUMP BODY |
| 22 | 47-89983T | IMPELLER, WATER PUMP |
| 23 | 28-8M0032837 | KEY, IMPELLER DRIVE |
| 24 | 46-77822A1 | WATER PUMP BODY ASSEMBLY |
| 25 | 48753 | INSERT, WATER PUMP BODY |
| 26 | 12-8M0204649 | WASHER, WATER PUMP BODY AND BASE STUDS |
| 27 | 11-36069 | NUT, WATER PUMP BODY AND BASE STUDS |
| 28 | 26-38452 | SEAL, WATER PUMP BODY TO WATER TUBE |
| 29 | 12-38453 | WASHER, CUPPED - WATER TUBE SEAL |
| 30 | 25-20273 | RING, RUBBER - CENTRIFUGAL SLINGER |
| 31 | 10-79953Q04 | SCREW, GREASE FILLER AND VENT HOLE |
| 32 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 35 | 76063A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 36 | 53-29641 | CLIP, RETAINING - SHIFT SHAFT |
| 37 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 38 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 39 | 26-24590 | OIL SEAL, SHIFT SHAFT BUSHING (LOWER) |
| 40 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING (UPPER) |
| 41 | 12-31266 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 42 | 78036 | BASE, LOWER - REVERSE LOCKING- NOT PART OF GEAR HOUSING |
| 43 | 43308T1 | CAM, REVERSE LOCKING - NOT PART OF GEAR HOUSING |
| 44 | 45-76088A2 | DRIVE SHAFT ASSEMBLY (LONG SHAFT) |
| 45 | 24-20254 | SPRING, COMPRESSION - DRIVE SHAFT |
| 46 | 17-30545 | PIN, DRIVE SHAFT |
| 47 | 88181 | SLEEVE, LUBRICATION - DRIVE SHAFT |
| 48 | 15-20929A1 | SHIM, BEARING TO GEAR HOUSING (.002-3-5-10) |
| 49 | 31-38146A1 | ROLLER BEARING ASSEMBLY, TAPERED - DRIVE SHAFT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 1643-6038A6 | GEAR HOUSING ASSEMBLY (SEE F6 FOR BREAKDOWN) |
| 50 | 760394 | CAM, SHIFT |
| 51 | 38441 | FOLLOWER, CAM |
| 52 | 20843 | SLIDE, CROSS PIN |
| 53 | 24-39845 | SPRING, COMPRESSION - CAM FOLLOWER |
| 54 | 15-38374A1 | SHIM, BEARING CUP TO GEAR HOUSING (.002-3-5-10) |
| 55 | 31-38356A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 56 | 31-21739 | BEARING, ROLLER - FORWARD GEAR |
| 57 | 43-60247T5 | FORWARD GEAR |
| 58 | 52-92911T | RATCHET, SLIDING CLUTCH |
| 59 | 17-8M0020942 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 60 | 24-38114 | SPRING, RETAINING - CROSS PIN |
| 61 | 44-75365 | SHAFT, PROPELLER |
| 62 | 43-79159T | REVERSE GEAR |
| 63 | 15-20927A1 | SHIM, THRUST WASHER TO GEAR HOUSING (.002-3-5-10) |
| 64 | 12-32004 | WASHER, THRUST - REVERSE GEAR |
| 65 | 30-20839T | BEARING, BALL - REVERSE GEAR |
| 66 | 25-31986 | "O" RING, BEARING CARRIER |
| 67 | 69386T1 | BEARING CARRIER ASSEMBLY |
| 68 | 31-21700 | BEARING, ROLLER - BEARING CARRIER |
| 69 | 26-8M0205511 | OIL SEAL, BEARING CARRIER |
| 70 | 26-8M0203757 | OIL SEAL, BEARING CARRIER - LINE CUTTER |
| 71 | 28-30281 | KEY, LOCATING- BEARING CARRIER |
| 72 | 14-53012 | TAB WASHER, GEAR HOUSING COVER |
| 73 | 11-87763 | COVER, GEAR HOUSING |
| 74 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 75 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 76 | 12-8M0214963 | WASHER, DRIVE SHAFT HOUSING STUD (3/8") |
| 77 | 11-8M0204726 | NUT Comment: DRIVE SHAFT HOUSING TO GEAR HOUSING (3/8") |
| 78 | 12-65791 | WASHER, DRIVE SHAFT HOUSING STUD (7/16") |
| 79 | 11-8M0204653 | NUT Comment: DRIVE SHAFT HOUSING TO GEAR HOUSING (7/16") |
| 80 | 73345A1 | THRUST HUB, PROPELLER |
| 81 | 14-8M0214942 | TAB WASHER, PROPELLER |
| 82 | 11-69578Q1 | NUT, PROPELLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | A-27-76589A89 | GASKET SET |
| 1 | 1643-9539T1 | GEAR HOUSING ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 1A | 22-85822A10 | CONNECTOR ASSEMBLY, SPEEDOMETER Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 2 | 17-8M0084726 | PIN, DOWEL- GEAR HOUSING |
| 3 | 16-33778 | STUD Comment: WATER PUMP BODY/BASE TO GEAR HSG. (2 5/8") |
| 4 | 16-8M0034453 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING |
| 5 | 31-62091T | BEARING, ROLLER - DRIVE SHAFT |
| 6 | 72849A1 | SCREEN Comment: WATER INTAKE - PORT - LONG SHAFT |
| 7 | 10-36070 | SCREW Comment: WATER INTAKE SCREEN TO GEAR HOUSING |
| 8 | 11-859124 | NUT Comment: WATER INTAKE SCREEN SCREW |
| 9 | 92815 | PLATE, SUPPORT - EXHAUST TUBE |
| 10 | 37721001 | SEAL, EXHAUST TUBE |
| 11 | 43-60245 | GEAR, PINION - DRIVE SHAFT |
| 12 | 11-55910 | NUT, PINION GEAR TO DRIVE SHAFT |
| 13 | 27-19552 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 14 | 25-26722 | "O" RING, WATER PUMP BASE |
| 15 | 46-77177A1 | WATER PUMP BASE ASSEMBLY |
| 16 | 26-79831 | OIL SEAL, WATER PUMP BASE |
| 17 | 26-90562 | OIL SEAL, WATER PUMP BASE |
| 18 | 17-35973 | DOWEL PIN Comment: WATER PUMP BASE TO WATER PUMP BODY |
| 19 | 27-19553 | GASKET, LOWER Comment: WATER PUMP BASTE TO FACE PLATE |
| 20 | 32768 | PLATE, FACE Comment: WATER PUMP BASE TO WATER PUMP BODY |
| 21 | 27-19551 | GAKSET, UPPER Comment: FACE PLATE TO WATER PUMP BODY |
| 22 | 47-89983T | IMPELLER, WATER PUMP |
| 23 | 28-8M0032837 | KEY, IMPELLER DRIVE |
| 24 | 46-77822A1 | WATER PUMP BODY ASSEMBLY |
| 25 | 48753 | INSERT, WATER PUMP BODY |
| 26 | 12-8M0204649 | WASHER, WATER PUMP BODY AND BASE STUDS |
| 27 | 11-35888 | NUT, WATER PUMP BODY AND BASE STUDS |
| 28 | 26-38452 | SEAL, RUBBER Comment: WATER INLET TUBE (WATER PUMP BODY) |
| 29 | 12-38453 | WASHER, NYLON - WATER PUMP BODY |
| 30 | 25-20273 | RING, RUBBER Comment: CENTRIFUGAL SLINGER (DRIVE SHAFT) |
| 31 | 22-8M0058389 | SCREW, DRAIN (MAGNETIC) |
| 32 | 12-191833 | WASHER, GREASE FILLER AND DRAIN SCREW |
| 35 | 76063A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 36 | 53-29641 | CLIP, REATAING - SHIFT SHAFT |
| 37 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 38 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 39 | 26-8M0204708 | OIL SEAL, SHIFT SHAFT BUSHING |
| 41 | 12-77674 | WASHER, RUBBER- SHIFT SHAFT BUSHING |
| 42 | 78036 | BASE Comment: LOWER - REVERSE LOCKING NOT PART OF GEAR HOUSING |
| 43 | 43308T1 | CAM Comment: REVERSE LOCKING NOT PART OF GEAR HOUSING |
| 44 | 45-77389A2 | DRIVE SHAFT ASSEMBLY Comment: (LONG SHAFT) SERIAL GROUP #7 |
| 45 | 24-20254 | SPRING, COMPRESSION - DRIVE SHAFT |
| 46 | 17-30545 | PIN, DRIVE SHAFT |
| 47 | 88181 | SLEEVE, LUBRICATION - DRIVE SHAFT |
| 48 | 15-92881A1 | SHIM, BEARING TO GEAR HOUSING (.002-3-5-10-20) |
| 49 | 31-8M0166756 | ROLLER BEARING ASSEMBLY Comment: TAPERED - DRIVE SHAFT |
| 49A | 78654A1 | SEAT ASSEMBLY, DRIVE SHAFT Comment: SPLINED NYLON SEAL SEAT ON DRIVE SHAFT |
| 49B | 86304 | SEAL, SPLINED - DRIVE SHAFT Comment: SPLINED NYLON SEAL SEAT ON DRIVE SHAFT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1643-9539A3 | GEAR ASS'Y COMP. (LONG SHAFT) Comment: SEE NOTE BELOW UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 1 | 1643-9539T1 | GEARE HOUSING ASSEMBLY Comment: SEE F10 FOR BREAKDOWN UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 50 | 760394 | CAM, SHIFT Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 51 | 38441 | FOLLOWER, CAM |
| 52 | 20843 | SLIDE, CROSS |
| 53 | 24-39845 | SPRING, COMPRESSION - CAM FOLLOWER |
| 54 | 15-38374A1 | SHIM, BEARING CUP TO GEAR HOUSING (.002-3-5-10) |
| 55 | 31-38356A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 56 | 31-21739 | BEARING, ROLLER - FORWARD GEAR |
| 57 | 43-60247T5 | FORWARD GEAR ASSEMBLY |
| 58 | 52-92911T | RATCHET, SLIDING CLUTCH |
| 59 | 17-8M0020942 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 60 | 24-38114 | SPRING, RETAINING - CROSS PIN |
| 61 | 44-75365 | SHAFT, PROPELLER |
| 62 | 43-79159T | REVERSE GEAR ASSEMBLY |
| 64 | 12-32004 | WASHER, THRUST - REVERSE GEAR |
| 65 | 30-20839T | BEARING, BALL - REVERSE GEAR |
| 66 | 25-31986 | "O" RING, BEARING CARRIER |
| 67 | 69386T1 | BEARING CARRIER ASSEMBLY |
| 68 | 31-21700 | BEARING, ROLLER - BEARING CARRIER |
| 69 | 26-8M0205511 | OIL SEAL, BEARING CARRIER |
| 70 | 26-8M0203757 | OIL SEAL, BEARING CARRIER |
| 71 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 72 | 14-53012 | TAB WASHER, GEAR HOUSING COVER |
| 73 | 11-87763 | COVER, GEAR HOUSING |
| 74 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 75 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING |
| 76 | 12-8M0214963 | WASHER Comment: DRIVE SHAFT HOUSING STUD (3/8') |
| 77 | 11-8M0204726 | NUT Comment: DRIVE SHAFT HOUSING STUD (3/8") |
| 78 | 12-65791 | WASHER Comment: DRIVE SHAFT HOUSING GEAR HOUSING STUD (7/16") |
| 79 | 11-8M0204653 | NUT, DRIVE SHAFT HOUSING TO GEAR STUD (7/16") |
| 80 | 73345A1 | THRUST HUB, FRONT |
| 81 | 14-8M0214942 | TAB WASHER, PROPELLER |
| 82 | 11-69578Q1 | NUT, PROPELLER |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 37-89329A80 | DECAL SET - SERIAL GROUP #7 |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 48-73144A45 | PROPELLER ASSEMBLY (ALUMINUM)(PITCH 17") Comment: 3 BLADES |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 814283A2 | BRACKET, ANDCHOR-CONTROL CABLES |
| 2 | 60283A1 | LINK ASSEMBLY Comment: SHIFT SHAFT AND ANCHOR BRACKET |
| 3 | 24-20099 | SPRING, LINK TO ANCHOR BRACKET |
| 4 | 37896 | GUIDE BLOCK, LINK |
| 5 | 52100 | WEAR PLATE, NYLON-LINK |
| 6 | 8M0036768 | LATCH, LINK TO ANCHOR BRACKET |
| 7 | 12-69056 | WASHER, LINK LATCH |
| 8 | 11-36069 | NUT, LINK ATTACHING |
| 9 | 75355A32 | SHIFT SHAFT ASSEMBLY, UPPER (LONG SHAFT) Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 11 | 13-29720 | WASHER, WAVE-SHIFT SHAFER TO LINK |
| 12 | 23-26600 | BUSHING, NYLON-SHIFT SHAFT TO LINK |
| 13 | 12-35462 | WASHER, LINK (SHIFT SHAFT END) |
| 14 | 39519 | CUP, RETAINER-ANCHOR BRACKET |
| 15 | 87609A1 | LEVER, LYLON-SHIFT CABLE LOCKING |
| 16 | 17-47175 | PIN, LOCKING LEVER AND CPVER FASTENING |
| 17 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 18 | 39667 | COVER, NYLON-SHIFT CALBE |
| 19 | 10-69101 | SCREW Comment: ANCHOR BRACKET TO CRANKCASE/CYL. BLOCK (7/8") |
| 20 | 27-884511 | GASKET, POWERHEAD TO EXHAUST PLATE Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 21 | 79618A3 | ESHAUST PLATE ASSEMBLY Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 21A | 23-27132 | BUSHIING, NYLON-EXHAUST PLATE |
| 22 | 16-8M0034449 | STUD Comment: EXHAUST PLATE TO DRIVE SHAFT HOSING (1 11/16") |
| 23 | 16-68166 | STUD Comment: EXHAUST PLATE TO DRIVE SHAFT HOUSING (2 1/8") |
| 24 | 26-38452 | SEAL, WATER INLET TUBE Comment: UNITED STATES 4825249 AND UP AUSTRALIA 8049850 AND UP BELGIUM 9176876 AND UP CANADA 7110248 AND UP |
| 25 | 12-38453 | WASHER, NYLON-WATER INLET TUBE SEAL |
| 26 | 38500 | RETAINER, WATER INLET TUBE SEAL Comment: UNITED STATES 5128279 AND BELOW AUSTRALIA 8056219 AND BELOW BELGIUM 9207525 AND BELOW CANADA 7110997 AND BELOW |
| 27 | 10-69069 | SCREW, RETAINER TO EXHAUST PLATE (3/4") Comment: UNITED STATES 5128279 AND BELOW AUSTRALIA 8056219 AND BELOW BELGIUM 9207525 AND BELOW CANADA 7110997 AND BELOW |
| 28 | 79799 | HOUSING, WATER INLET TUBE SEAL Comment: UNITED STATES 5128280 AND UP AUSTRALIA 8056220 AND UP BELGIUM 9207526 AND UP CANADA 7129888 AND UP |
| 29 | 27-797971 | GASKET, HOUSING GROUP #7 |
| 30 | 10-79798 | SCREW, HOUSING TO EXHAUST PLATE GROUP #7 |
| 31 | 60307 | SEAL EXHAUST PLATE |
| 32 | 60306 | STRIP, RETAINING-EXHAUST PLATE SEAL |
| 33 | 10-62568 | SCREW Comment: RETAINING STRIP TO EXHAUST PLATE (3/8") |
| 34 | 90435 | MOUNT Comment: RUBBER-EXHAUST PLATE TO REAR COWL SUPPORT |
| 35 | 49651A1 | GROUND STRAP ASS"Y Comment: EXHAUST PLATE TO REAT COWL SUPPORT |
| 36 | 12-69057 | WASHER, RUBBER MOUNT ATTACHING |
| 37 | 11-8267089 | NUT, RUBBER MOUNT TO EXHAUST PLATE |
| 38 | 10-28668 | SCREW Comment: EXHAUST PLATE TO CYLINDER BLOCK (7/8") |
| 39 | 27-385011 | GASKET, ADAPTOR PLATE TO DRIVE SHAFT HOUSING |
| 40 | 42718 | EXHAUST TUBE, ADAPTOR |
| 41 | 27-602801 | GASKET, EXHAUST TUBE TO EXHAUST PLATE |
| 42 | 10-28636 | SCREW, EXHAUST TUBE TO EXHAUST PLATE (3/4") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 8M0058226 | RECTIFIER ASSEMBLY |
| 2 | 10-38055 | SCREW, RECTIFIER TO PLATE (5/8") |
| 3 | 13-26996 | LOCKWASHER, RECTIFIER SCREW |
| 4 | 11-45076 | NUT, RECTIFIER TERMINAL |
| 5 | 89-853654A1 | STARTER SOLENOID |
| 6 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 7 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 8 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 9 | 11-8M0204668 | NUT, SOLENOID TERMINAL (5/16") |
| 10 | 46265 | BOOT, TERMINAL-STARTER SOLENOID |
| 11 | 10-69054 | SCREEW, SOLENOID TO ATTENUATOR (3/4") |
| 12 | 13-26992 | LOCKWAHER, SOLENOID SCREW |
| 13 | 50-44369A1 | STARTER MOTOR ASSEMBLY |
| 14 | 8M0043376 | STOP, RUBBER-STARTER MOTOR |
| 15 | 84-60872 | CABLE Comment: STARTER TO SOUND ATTENTUATOR-BLACK (9 1/2") |
| 16 | 10-69035 | SCREW, CABLE TO STARTER MOTOR (5/8") |
| 17 | 84-93389A6 | CABLE Comment: SOLENOID TO STARTER MOTOR-YELLOW (9 1/2") |
| 18 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 19 | 11-20890 | NUT, STARTER MOTOR TERMINAL |
| 20 | 23-8M0034918 | COLLAR, RUBBER-STARTER MOUNT |
| 21 | 23-56774 | SPACER, COLLAR TO MOUNTING BRACKETS |
| 22 | 84-62862A4 | CABLE, BATTERY TO STARTER SOLENOID |
| 23 | 84-73204 | WIRING HARNESS (INTERNAL) |
| 24 | 10-72202 | SCREW, WIRING HARNESS ATACHING (1 1/8") |
| 27 | 60114A1 | BRACKER ASSEMBLY, WIRING HARNESS |
| 28 | 26-60925 | SEAL, WIRING HARNESS BRACKET |
| 29 | 10-89778 | SCREW Comment: WIRING HARNESS BRACKET MOUNTING (2 1/8") |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 76864 | HOUSING, NYLON-THROTTLE ACTUATOR |
| 2 | 77025 | CAM, NYLON-THROTTLE ACTUATOR |
| 3 | 10-37571 | SCREW, HOUSING TO CRANKCASE (1/2") |
| 4 | 13-26996 | LOCKWASHER, HOUSING TO CRANKCASE SCREW |
| 5 | 60570 | PLATE, RETAINER-ACTUATOR HOUSING |
| 6 | 23-74213 | BARREL, NYLON-THROTTLE LINK ROD |
| 7 | 74164 | ROD, LINK-THROTTLE |
| 8 | 77013A1 | SWIVEL, LINK ROD TO THROTTLE CONTROL LEVER |
| 8A | 13-29402 | WAVE WASHER, LINK ROD SWIVEL |
| 9 | 23-26856 | BUSHING, LINK ROD SWIVEL |
| 10 | 12-73288 | WASHER, LINK ROD SWIVEL |
| 11 | 11-45774 | NUT, LINK ROD SWIVEL |
| 12 | 77032A2 | LEVER ASSEMBLY, THROTTLE CONTROL |
| 13 | 10-67916 | SCREW, ADJUSTING-THROTTLE LEVER (2") |
| 14 | 11-29598 | NUT, JAM-ADJUSTING SCREW |
| 15 | 52023 | CAP, ADJUSTING SCREW |
| 16 | 10-818165 | SCREW Comment: THROTTLE CONTROL LEVER TO CYLINDER BLOCK (1 3/4") |
| 17 | 23-55164 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 18 | 23-55171 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 19 | 24-55162 | SPRING, RETURN-SPARK ADVANCE LEVER |
| 20 | 77031A2 | LEVER ASSEMBLY, SPARK ADVANCE |
| 21 | 12-68410 | WASHER, THROTTL CONTROL LEVER SCREW |
| 22 | 10-73656 | SCREW, SPARK ADVANCE ADJUSTING (1 1/2") |
| 23 | 11-68219 | NUT, SPARK ADVANTAGE ADJUSTING SCREW |
| 24 | 48039 | CAP, SPARK ADVANCE ADJUSTING SCREW |
| 25 | 10-77650 | SCREW Comment: ADJUSTING-SPARK ADVANCE LEVER (2 1/4") |
| 26 | 11-29598 | NUT, JAM-ADJUSTING SCREW |
| 27 | 52023 | CAP, ADJUSTING SCREW |
| 28 | 39483 | LATCH Comment: THROTTLE CONTROL LEVER (THROTTLE CABLE) |
| 29 | 10-69026 | SCREW Comment: LATCH TO THROTTLE CONTROL LEVER (7/8") |
| 30 | 24-20099 | SPRING, COMPRESSION-LATCH SCREW |
| 31 | 11-826709109 | NUT, LATCH ATTACHING SCREW |
| 32 | 74897T | BARREL, LINK ROD TO STATOR |
| 33 | 74212 | ROD, LINK-SPARK ADVANCE |
| 34 | 77013A1 | SWIVEL, LINK ROD TO SPARK ADVANCE LEVER |
Regular maintenance keeps your Mercury 70 (3 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
