Images
Product
Price
Qty
Options
$82.50
- $83.50
- $83.50
- Unit price
- per
$83.50
$82.50
$82.50
$71.50
$16.99
Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
Mercury 650 (3 CYL.) (3293184 THRU 3525440) Parts & Diagrams
🔎 Mercury 650 (3 CYL.) Reference Library — Exploded parts diagrams (17 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 650 (3 CYL.) is a 4-Stroke, Inline 4-Cylinder, EFI, SOHC outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
Quick Reference Specifications
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, EFI, SOHC |
| Horsepower | 65 HP |
| Displacement | 2100 cc |
| Bore x Stroke | 90 mm x 81 mm |
| Spark Plug (Type & Gap) | NGK IZFR6F-11 |
| Engine Oil Capacity | 5.2 L (5.5 quart) |
| Recommended Engine Oil | Mercury FourStroke Oil 10W-30 |
| Gear Case Oil Capacity | — |
| Idle Speed (in gear) | 650 ± 25 RPM (in gear) |
| Full Throttle RPM Range | 4500-5500 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 650 (3 CYL.):
- Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
- Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
- Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
- Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
- Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 650 (3 CYL.).
▶CARBURETOR ASSEMBLY (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 1395-51091 | REPAIR PARTS KIT (1 PER CARBURETOR) |
| 1 | 1360-4663A1 | CARBURETOR ASSEMBLY, COMPLETE (WMK-5) |
| 2 | 1395-8673 | FLOAT ASSEMBLY |
| 6 | 1395-83181 | INLET NEEDLE, SEAT AND GASKET |
| 9 | 1399-5152 | COVER, FLOAT BOWL |
| 10 | 10-52195 | SCREW, FLOAT BOWL COVER (SHORT) |
| 11 | 1395-4804 | SCREW, FLOAT BOWL COVER (LONG) |
| 12 | 13-26995 | LOCKWASHER, FLOAT BOWL COVER SCREW |
| 13 | 1395-4805 | SCREEN, FILTER |
| 14 | 1395-4806 | SCREW, THROTTLE STOP LEVER |
| 15 | 1395-4807 | SHAFT, THROTTLE |
| 17 | 1395-4540 | SCREW, BODY (IDLE TUBE) |
| 19 | 1395-9017 | SHUTTER, THROTTLE |
| 20 | 24-27160 | SPRING, IDLE ADJUSTMENT SCREW |
| 21 | 1399-3515 | SCREW, IDLE ADJUSTMENT |
| 22 | 1395-4541 | SCREW, PLUG - MAIN FUEL JET CHANNEL |
| 24 | 1395-6030 | JET, MAIN FUEL (.070) |
| 26 | 1395-4542 | SCREW, PLUG - MAIN NOZZLE |
| 29 | 1395-4543 | SCREW, BODY CHANNEL |
| 30 | 27-481641 | GASKET, CARBURETOR FLANGE |
| 31 | 11-862902 | NUT, CARBURETOR MOUNTING STUD |
▶CARBURETOR LINKAGE AND CHOKE SOLENOID (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 60549A7 | CHOKE SOLENOID |
| 2 | 13-26996 | LOCKWASHER, HARNESS LEAD TO CHOKE SOLENOID |
| 3 | 11-68219 | NUT, HARNESS LEAD TO CHOKE SOLENOID ATTACHING |
| 4 | 10-33524 | SCREW, CHOKE SOLENOID ATTACHING (5/8") |
| 5 | 11-29250 | NUT, CHOKE SOLENOID ATTACHING SCREWS |
| 6 | 56074A5 | PLUNGER ASSEMBLY, CHOKE SOLENOID |
| 7 | 1360-4663A1 | CARBURETOR ASSEMBLY, COMPLETE |
| 8 | 60568 | LEVER, THROTTLE |
| 9 | 60292A1 | COUPLING ASSEMBLY, THROTTLE SHAFT |
| 10 | 28-89694 | INSERT, THROTTLE SHAFT COUPLING |
| 11 | 60120 | HOUSING, CHOKE |
| 12 | 10-38055 | SCREW, CHOKE HOUSING MOUNTING (5/8") |
| 13 | 60312 | LEVER, MANUAL CHOKE |
| 14 | 13-34632 | WASHER, WAVE - CHOKE LEVER TO CHOKE HOUSING SCREW |
| 15 | 12-34392 | WASHER, CHOKE LEVER TO CHOKE HOUSING SCREW |
| 16 | 10-20597 | SCREW, CHOKE LEVER TO CHOKE HOUSING (3/8") |
| 17 | 60305 | ROD, CHOKE |
| 18 | 24-60288 | SPRING, TENSION - CHOKE ROD |
| 19 | 60290A1 | CHOKE ARM LEVER ASSEMBLY |
| 20 | 60291 | SHUTTER, CHOKE - CARBURETOR |
| 21 | 10-60846 | SCREW, CHOKE SHUTTER TO CHOKE LEVER (1/4") |
▶CLAMP AND SWIVEL BRACKET ASSEMBLY (54 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1440-8394A1 | CLAMP BRACKET ASSEMBLY |
| 2 | 28403A3 | THUMB SCREW ASSEMBLY |
| 3 | 12-28404 | WASHER, THUMB SCREW |
| 4 | 8M0041936 | TUBE, TILT - CLAMP BRACKET TO SWIVEL BRACKET |
| 5 | 12-52864 | WASHER, CLAMP BRACKET TILT TUBE |
| 6 | 11-858869 | NUT, TILT TUBE FASTENING |
| 7 | 53078 | CAP, PLASTIC - TILT TUBE |
| 8 | 23-59624 | SPACER, CLAMP BRACKET STUD |
| 9 | 16-59625 | STUD, CLAMP BRACKET (9 1/2") |
| 10 | 13-8M0204647 | LOCKWASHER, CLAMP BRACKET STUD |
| 11 | 11-28770 | NUT, CLAMP BRACKET STUD |
| 12 | 17-8M0026068 | TILT LOCK PIN ASSEMBLY |
| 13 | 32-28052 | SLEEVE, RUBBER - TILT LOCK PIN BUMPER |
| 14 | 10-68299 | BOLT, CLAMP BRACKET TO BOAT TRANSOM (3") |
| 15 | 12-68300 | WASHER, CLAMP BRACKET BOLT |
| 16 | 11-82670912 | NUT, CLAMP BRACKET BOLT |
| 17 | 55-28416 | PIN, UPPER SHOCK MOUNTING |
| 18 | 1490-8599A6 | SWIVEL BRACKET ASSEMBLY (LONG SHAFT) |
| 19 | 26-32911 | OIL SEAL, SWIVEL BRACKET |
| 20 | 10-47828 | SCREW, DRIVE - SWIVEL BRACKET |
| 21 | 22-69059 | FITTING, GREASE |
| 22 | 19-77633Q | LUBRICAP, SWIVEL BRACKET GREASE FITTING |
| 23 | 76386 | TILK LOCK ASSEMBLY, STARBOARD |
| 24 | 76385T | TILT LOCK ASSEMBLY, PORT |
| 25 | 47802 | TUBE, TILT LOCK |
| 26 | 18-47959 | COTTER PIN, TILT LOCK TUBE |
| 27 | 23-47803 | BUSHING, TILT LOCK TUBE |
| 28 | 13-69150 | WASHER, WAVE - TILT LOCK TUBE |
| 29 | 69540A2 | SWIVEL PIN AND STEERING ARM ASSEMBLY (LONG SHAFT) |
| 30 | 30711 | BUMPER, STEERING ARM |
| 31 | 10-33986 | BOLT, UPPER MOUNT TO SWIVEL PIN (5 1/4") |
| 32 | 10-31830 | SCREW, RIDE-GUIDE ATTACHING (1 3/4") |
| 33 | 11-8M0204726 | NUT, RIDE-GUIDE ATTACHING SCREW |
| 34 | 38-56267 | SERIAL PLATE |
| 35 | 10-25612 | SCREW, DRIVE - SERIAL PLATE TO SWIVEL BRACKET |
| 36 | 17-25598 | PIN, REVERSE LOCK SPRING ATTACHING |
| 37 | 12-26837 | WASHER, SWIVEL PIN TO BOTTOM YOKE (.065) |
| 38 | 77416T1 | YOKE, BOTTOM |
| 39 | 11-71956 | NUT, SWIVEL PIN RETAINING |
| 40 | 55-696531 | PIN, LOWER SHOCK MOUNTING |
| 41 | 87432 | REVERSE LOCK ASSEMBLY |
| 42 | 24-29821 | SPRING, REVERSE LOCK TENSION |
| 43 | 56349 | SHAFT, REVERSE LOCK PIVOT |
| 44 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 45 | 23-28199 | SPACER, UPPER SHOCK BUSHING TO CLAMP BRACKET |
| 46 | 12-28196 | WASHER, UPPER BUSHING RETAINER (INNER) |
| 47 | 12-59378 | WASHER, LOWER BUSHING RETAINER (INNER) |
| 48 | 55-58780A7 | SHOCK ABSORBER |
| 49 | 23-32171 | BUSHING, RUBBER - SHOCK ABSORBER (UPPER) |
| 50 | 23-28198 | BUSHING, RUBBER - SHOCK ABSORBER (LOWER) |
| 51 | 12-8M0204648 | WASHER, UPPER AND LOWER BUSHING RETAINER (OUTER) |
| 52 | 10-69375A1 | SCREW, UPPER AND LOWER SHOCK MOUNTING PIN (3/4"( |
| 53 | 70679 | COVER, UPPER AND LOWER SHOCK MOUNTING PIN |
| 54 | 10-37655 | SCREW, COVER TO SHOCK MOUNTING SCREWS (1/2") |
▶COWL SUPPORT BRACKETS (45 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 60117 | BRACKET, COWL SUPPORT - TOP |
| 2 | 62444 | SEAL, RUBBER - TOP BRACKET AND COVER MOUNTING PLATE |
| 3 | 10-60300 | SCREW, TOP COWL BRACKET ATTACHING (3/4") |
| 4 | 11-8M0207775 | NUT, SUPPORT BRACKET ATTACHING SCREW |
| 5 | 62501A1 | SHIELD ASSEMBLY, FLYWHEEL |
| 6 | 10-48409 | SCREW, SHIELD TO TOP SUPPORT BRACKET (5/8") - REAR |
| 7 | 10-62568 | SCREW, SHIELD TO TOP SUPPORT BRACKET (3/8") - FRONT |
| 8 | 60112 | BRACKET, COWL SUPPORT - REAR |
| 9 | 60299 | RETAINER, SPARK PLUG LEADS |
| 10 | 10-69079 | SCREW, RETAINER TO REAR SUPPORT BRACKET (1/2") |
| 11 | 90435 | MOUNT, RUBBER - BRACE TO REAR SUPPORT BRACKET |
| 12 | 12-69057 | WASHER, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 13 | 11-8267089 | NUT, RUBBER MOUNT TO REAR SUPPORT BRACKET |
| 14 | 60116 | BRACE, REAR COWL SUPPORT BRACKET (TOP) |
| 15 | 49651A1 | GROUND STRAP ASS'Y BRACE TO REAR SUPPORT BRACKET |
| 16 | 10-24644 | SCREW, SUPPORT BRACKET BRACE TO CYL. BLOCK COVER (1 3/8") |
| 17 | 11-8M0207775 | NUT, SUPPORT BRACKET BRACE ATTACHING SCREW |
| 18 | 64926 | BRACKET, COWL SUPPORT (FRONT) |
| 19 | 61344 | RETAINER, WIRING HARNESS AND BATTERY CABLE |
| 20 | 10-35519 | SCREW, RETAINER TO FRONT SUPPORT BRACKET (1/2") |
| 21 | 90435 | MOUNT, RUBBER - FRONT SUPPORT BRACKET |
| 22 | 12-69057 | WASHER, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 23 | 11-8267089 | NUT, RUBBER MOUNT TO FRONT SUPPORT BRACKET |
| 24 | 90435 | MOUNT, RUBBER - FRONT SUPPORT TO DISTRIBUTOR ADAPTOR |
| 25 | 49651A1 | GROUND STRAP ASSEMBLY, FRONT SUPPORT BRACKET |
| 26 | 12-69057 | WASHER, RUBBER MOUNT ATTACHING |
| 27 | 11-8267089 | NUT, RUBBER MOUNT ATTACHING |
| 28 | 76410 | SEAL, FUEL CONNECTOR - FRONT SUPPORT BRACKET |
| 29 | 62391 | BLANKET, SOUND - FRONT SUPPORT BRACKET (PORT) |
| 30 | 65915A2 | DRIP TRAY, FRONT SUPPORT BRACKET |
| 31 | 62869 | BLANKET, SOUND - DRIP TRAY TO FRONT SUPPORT BRACKET |
| 32 | 32-9912688 | HOSE, DRIP TRAY TO REAR SUPPORT BRACKET |
| 33 | 10-35519 | SCREW, DRIP TRAY TO FRONT SUPPORT BRACKET (1/2") |
| 34 | 54-22875 | CLIP, HOSE TO EXHAUST PLATE |
| 35 | 10-69079 | SCREW, HOSE CLIP FASTENING (7/16") |
| 36 | 8M0084613 | "D" WASHER, CLIP FASTENING SCREW |
| 37 | 76251A1 | PLATE, FRONT COVER MOUNTING |
| 38 | 76264 | LATCH, FRONT COVER ATTACHING |
| 39 | 24-60295 | SPRING, FRONT COVER LATCH |
| 40 | 10-38601 | SCREW, COVER PLATE TO SUPPORT BRACKET (5/8") |
| 41 | 11-8M0207775 | NUT, ATTACHING SCREW COVER PLATE |
| 42 | 32-8M0108355 | HOSE, TELL TALE - REAR BRACKET TO EXHAUST PLATE |
| 43 | 22-996642 | ELBOW, TELL TALE HOSE TO EXHAUST EXTENSION PLATE |
| 44 | 52889 | NOZZLE, TELL TALE HOSE TO REAR SUPPORT BRACKET |
| 45 | 10-35519 | SCREW, NOZZLE TO REAR SUPPORT BRACKET (1/2") |
▶COWLING AND FRONT COVER (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2142-6228A1 | COWL ASSEMBLY (STARBOARD) |
| 2 | 61661 | SEAL, RUBBER - COWL |
| 3 | 26-60297 | SEAL, FUEL CONNECTOR - COWL |
| 4 | 61634 | BLANKET, SOUND ABSORBING (LOWER) |
| 5 | 61633 | BLANKET, SOUND ABSORBING (UPPER) |
| 6 | 61662 | SEAL, RUBBER - COWL |
| 7 | 2141-6227A1 | COWL ASSEMBLY (PORT) |
| 8 | 26-60298 | SEAL, CONTROL CABLES - COWL |
| 9 | 61631 | BLANKET, SOUND ABSORBING (UPPER) |
| 10 | 61632 | BLANKET, SOUND ABSORBING (LOWER) |
| 11 | 60121 | BRACKET, COWL SEALING - REAR |
| 12 | 90980 | BRACKET, COWL HINGE |
| 13 | 10-455611 | SCREW, HINGE BRACKET TO COWL SEALING BRACKET (1 1/8") |
| 14 | 13-26992 | LOCKWASHER, HINGE BRACKET SCREW |
| 15 | 12-37998 | WASHER, HINGE BRACKET SCREW |
| 16 | 90979 | PIN, COWL HINGE |
| 17 | 10-53167T | SCREW, PIN TO COWL (7/8") |
| 18 | 13-8M0204647 | LOCKWASHER, PIN ATTACHING SCREW |
| 18A | 12-20722 | WASHER, PIN ATTACHING SCREW (STARBOARD SIDE ONLY) |
| 19 | 46785A5 | COWL LATCH ASSEMBLY |
| 20 | 62628 | BARREL, COWL LATCH |
| 21 | 10-31312 | SCREW, LATCH ASSEMBLY TO BARREL (7/8") |
| 22 | 15222 | BAR, ADJUSTMENT - COWL LATCH |
| 23 | 62629 | BARREL, COWL LATCH |
| 24 | 24-62624 | SPRING, TENSION - COWL LATCH |
| 25 | 12-30164 | WASHER, ADJUSTMENT BAR TO BARREL |
| 26 | 11-53153 | NUT, ADJUSTMENT BAR TO BARREL |
| 27 | 2143-7254A3 | COWL FRONT COVER ASSEMBLY |
| 28 | 61663 | BLANKET, SOUND ABSORBING - FRONT COVER |
| 29 | 61158T | HOOK, COWL FRONT COVER FASTENING |
| 30 | 10-69570 | SCREW, FASTENING HOOK TO COWL FRONT COVER (3/4") |
| 31 | 47341A11 | STARTER ROPE ASSEMBLY (FOR MANUAL STARTING ONLY) |
▶CRANKSHAFT, PISTONS AND CONNECTING RODS (29 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 39-78811A12 | RING, PISTON (.015) |
| 1 | 462-8839A2 | CRANKSHAFT ASSEMBLY |
| 2 | 30-64424T | BEARING, BALL - UPPER |
| 3 | 30-64424T | BEARING, BALL - LOWER |
| 4 | 15-22369A1 | SHIM, LOWER BEARING TO CRANKSHAFT |
| 5 | 60834A3 | CARRIER ASSEMBLY, "O" RING |
| 6 | 25-35276 | "O" RING, CARRIER |
| 7 | 542-4846A1 | MAIN BEARING ASSEMBLY (VALVE TYPE) |
| 8 | 17-20032 | DOWEL PIN, MAIN BEARING |
| 9 | 17-60282 | DOWEL PIN (STEPPED) |
| 10 | 17-65855 | DOWEL PIN, REED STOP |
| 11 | 34-66051A1 | REED SET, MATCHED - MAIN BEARING |
| 12 | 34-65946 | REED STOP |
| 13 | 10-77280 | SCREW, REED STOP MOUNTING (9/16") |
| 14 | 11-20110 | NUT, REED STOP MOUNTING SCREW |
| 15 | 10-45775 | SCREW, MAIN BEARING CLAMPING (9/16") |
| 16 | 11-45774 | NUT, MAIN BEARING SCREW CLAMPING |
| 17 | 26113T | RACE, OUTER (PAIR) |
| 18 | 53-26933 | RING, SNAP - OUTER RACE CLAMPING |
| 19 | 29-714221 | BEARING, NEEDLE |
| 20 | 774-9137A12 | PISTON AND PISTON PIN ASSEMBLY |
| 21 | 53-857196 | LOCK RING, PISTON PIN |
| 22 | 39-78816A12 | RING, PISTON |
| 23 | 624-8101A3 | CONNECTING ROD AND CAP ASSEMBLY |
| 24 | 10-54803 | SCREW, CAP TO CONNECTING ROD (1 1/2") |
| 25 | 11-49091 | NUT, CONNECTING ROD SCREW |
| 26 | 31-62596A1 | BEARING ASSEMBLY, CRANKPIN |
| 27 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 28 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
▶CYLINDER BLOCK AND CRANKCASE ASSEMBLY (59 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 855-4553A3 | CYLINDER BLOCK AND CRANKCASE ASSEMBLY |
| 2 | 27-60286 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 3 | 16-21831 | STUD, CARBURETOR MOUNTING (1 1/4") |
| 4 | 16-68201 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (2 1/4") |
| 5 | 17-43044 | DOWEL PIN, CRANKCASE TO CYLINDER BLOCK |
| 6 | 17-20323 | DOWEL PIN, CYLINDER BLOCK TO MAIN BEARING |
| 7 | 16-20984 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (4 1/4") |
| 8 | 16-68167 | STUD, CYLINDER BLOCK TO DRIVE SHAFT HOUSING (2 9/16") - TRA |
| 9 | 66517 | RESTRICTION, CYLINDER BLEED |
| 10 | 60115 | COVER, STARTER MOTOR TO CRANKCASE (BOTTOM) |
| 11 | 10-26132 | SCREW, STARTER MOTOR COVER TO CRANKCASE (2 3/4") |
| 12 | 11-29250 | NUT, STARTER MOTOR COVER SCREW |
| 13 | 10-57841 | SCREW, STARTER MOTOR COVER TO CRANKCASE (2 3/4") |
| 14 | 13-8M0204647 | LOCKWASHER, STARTER MOTOR COVER SCREW |
| 15 | 22-328022 | PIPE PLUG, CRANKCASE |
| 16 | 79735A1 | COVER, STARTER MOTOR TO CRANKCASE (TOP) |
| 17 | 10-21449 | SCREW, STARTER MOTOR COVER TO CRANKCASE (2") |
| 18 | 10-26132 | SCREW, STARTER MOTOR COVER TO CRANKCASE (2 1/2") |
| 19 | 11-29250 | NUT, STARTER MOTOR COVER SCREW |
| 20 | 10-69094 | SCREW, CRANKCASE TO CYLINDER BLOCK (7/8") |
| 21 | 10-69090 | SCREW, CRANKCASE TO CYLINDER BLOCK (2 1/4") |
| 22 | 10-22039 | SCREW, CRANKCASE TO CYLINDER BLOCK (2 3/4") |
| 23 | 12-26020 | WASHER, CRANKCASE TO CYLINDER BLOCK SCREW |
| 24 | 11-29250 | NUT, CRANKCASE TO CYLINDER BLOCK SCREW |
| 25 | 62397 | INDICATOR, TIMING |
| 26 | 1143-4390A1 | END CAP ASSEMBLY UPPER |
| 27 | 25-47254 | "O" RING, END CAP |
| 28 | 21-42657A3 | CHECK VALVE ASSEMBLY, END CAP |
| 29 | 26-41953 | OIL SEAL, END CAP |
| 30 | 10-30225 | SCREW, UPPER END CAP MOUNTING (1") |
| 31 | 15-47248A1 | SHIM, UPPER END CAP (.006-8-10) |
| 32 | 1144-4888A1 | END CAP ASSEMBLY, LOWER |
| 33 | 25-32546 | "O" RING, END CAP |
| 34 | 26-41953 | OIL SEAL, END CAP |
| 35 | 21-42657A3 | CHECK VALVE ASSEMBLY, END CAP |
| 36 | 10-30225 | SCREW, LOWER END CAP MOUNTING (1") |
| 37 | 15-20085A1 | SHIM, LOWER END CAP (.002-3-5-10) |
| 38 | 58910 | COVER, TRANSFER PASSAGE |
| 39 | 27-60311 | GASKET, TRANSFER PASSAGE COVER |
| 40 | 10-38837 | SCREW, TRANSFER PASSAGE COVER MOUNTING (1 1/8") |
| 41 | 1025-8116A1 | COVER, CYLINDER BLOCK |
| 42 | 27-88449 | GASKET, CYLINDER BLOCK COVER |
| 43 | 10-21091 | SCREW, CYLINDER BLOCK COVER MOUNTING (1 1/8") |
| 44 | 11-8M0207775 | NUT, COVER MOUNTING SCREWS |
| 45 | 22-328022 | PLUG, CYLINDER BLOCK COVER |
| 46 | 27-60309 | GASKET, BAFFLE PLATE TO CYLINDER BLOCK |
| 47 | 58913 | PLATE, BAFFLE - EXHAUST MANIFOLD |
| 48 | 27-60308 | GASKET, BAFFLE PLATE TO EXHAUST MANIFOLD COVER |
| 49 | 58912 | COVER, EXHAUST MANIFOLD |
| 50 | 10-64022 | SCREW, THROTTLE LEVER ADJUSTING (2 1/8") |
| 51 | 11-20890 | NUT, THROTTLE LEVER ADJUSTING SCREWS |
| 52 | 52023 | CAP, NYLON - THROTTLE LEVER ADJUSTING SCREWS |
| 53 | 10-60411 | SCREW, BAFFLE PLTAE AND EXHAUST MANIFOLD COVER MOUNTING (1 1 |
| 54 | 58124A15 | SWITCH, MERCURY |
| 55 | 10-48591 | SCREW, MERCURY SWITCH TO CRANKCASE (1/2") |
| 56 | 17-36242 | PIN, ROLL - MERCURY SWITCH |
| 57 | 61990 | STA-STRAP, MERCURY SWITCH LEAD |
| 58 | 32-892024122 | HOSE, CRANKCASE BLEED (12") |
| 59 | 22-56759 | FITTING, CRANKCASE BLEED (PART OF CYLINDER BLOCK AND CRANKCA |
▶DISTRIBUTOR ADAPTOR AND THROTTLE LINKAGE (44 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-4797A9 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 2 | 12-60569 | WASHER, DISTRIBUTOR ADAPTOR TO DISTRIBUTOR HOUSING |
| 3 | 60576 | ADAPTOR, DISTRIBUTOR |
| 4 | 17-8M0084726 | PIN, DISTRIBUTOR ADAPTOR TO CRANKCASE LOCATING |
| 5 | 10-69090 | SCREW, DISTRIBUTOR ADAPTOR TO CRANKCASE (2 1/4") |
| 6 | 11-29250 | NUT, DISTRIBUTOR ADAPTOR SCREW |
| 7 | 22-25094 | FITTING, GREASE - DISTRIBUTOR ADAPTOR |
| 8 | 84-60871A3 | CABLE ASSEMBLY, ADAPTOR TO FRONT SUPPORT BRACKET |
| 9 | 12-27939 | WASHER, DISTRIBUTOR ADAPTOR |
| 10 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING |
| 11 | 13-27959 | WASHER, WAVE - DISTRIBUTOR ADAPTOR |
| 12 | 54567 | CAP, DISTRIBUTOR HOUSING |
| 13 | 23-29909 | SPACER, DRIVE PULLEY |
| 14 | 29906A1 | DRIVEN PULLEY ASSEMBLY |
| 15 | 17-29908 | PIN, ROLL - FLANGE LOCATING |
| 16 | 29907 | FLANGE, DRIVEN PULLEY |
| 17 | 28-29910 | KEY, DISTRIBUTOR DRIVER |
| 18 | 10-68554 | SCREW, PULLEY CLAMPING (1/2") |
| 19 | 20140 | BELT, TIMING |
| 20 | 60571 | ROD, LINK - SPARK ADVANCE |
| 21 | 8M0221994 | BARREL, NYLON - LINK ROD TO DISTRIBUTOR HOUSING |
| 22 | 27947 | SWIVEL, LINK ROD TO SPARK ADVANCE LEVER |
| 23 | 60578 | LEVER, THROTTLE CONTROL |
| 24 | 737-5537 | SCREW, THROTTLE CONTROL LEVER TO CYLINDER BLOCK (1 3/4") |
| 25 | 23-55164 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 26 | 23-55171 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 27 | 24-55162 | SPRING, RETURN - SPARK ADVANCE LEVER |
| 28 | 60579 | LEVER, SPARK ADVANCE |
| 29 | 12-68410 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 30 | 10-45210 | SCREW, SPARK ADVANCE ADJUSTING (1 1/4") |
| 31 | 11-68219 | NUT, SPARK ADVANCE ADJUSTING SCREW |
| 32 | 48039 | CAP, SPARK ADVANCE ADJUSTING SCREW |
| 33 | 39483 | LATCH, THROTTLE CONTROL LEVER (THROTTLE CABLE) |
| 34 | 10-69026 | SCREW, LATCH TO THROTTLE CONTROL LEVER (7/8") |
| 35 | 24-20099 | SPRING, COMPRESSION - LATCH SCREW |
| 36 | 11-826709109 | NUT, LATCH ATTACHING SCREW |
| 37 | 60573 | ROD, LINK - THROTTLE |
| 38 | 27947 | SWIVEL, LINK ROD TO THROTTLE CONTROL LEVER |
| 39 | 8M0221994 | BARREL, NYLON - THROTTLE LINK ROD TO ACTUATOR CAM |
| 40 | 65914 | CAM, NYLON - THROTTLE ACTUATOR |
| 41 | 76864 | HOUSING, NYLONG - THROTTLE ACTUATOR |
| 42 | 10-37571 | SCREW, HOUSING TO CRANKCASE (1/2") |
| 43 | 13-26996 | LOCKWASHER, HOUSING TO CRANKCASE SCREW |
| 44 | 60570 | PLATE, RETAINER - ACTUATOR HOUSING |
▶DISTRIBUTOR HOUSING AND ROTOR (48 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 8M0084600 | CONNECTOR, SPARK PLUG LEAD |
| 1 | 30-20066 | BALL BEARING, DISTRIBUTOR HOUSING (UPPER) |
| 2 | 11-54209 | NUT, ROTOR SHAFT TO DISTRIBUTOR HOUSING |
| 3 | 23-60566 | SLEEVE, ROTOR SHAFT |
| 4 | 332-4797A9 | HOUSING ASSEMBLY, DISTRIBUTOR |
| 5 | 53417 | GROUND STRAP ASSEMBLY, DISTRIBUTOR TO CRANKCASE |
| 6 | 10-62568 | SCREW, GROUND STRAP ATTACHING (3/8") |
| 7 | 58807A1 | FLAME ARRESTOR ASSEMBLY, DISTRIBUTOR HOUSING |
| 8 | 54-22875 | CLAMP, DISTRIBUTOR LEADS TO DISTRIBUTOR HOUSING |
| 9 | 10-62568 | SCREW, DISTRIBUTOR LEAD CLIP FASTENING (3/8") |
| 10 | 8M0084613 | "D" WASHER, CLIP SCREW |
| 11 | 54-22740 | CLIP, DISTRIBUTOR LEADS TO FRONT SUPPORT BRACKET |
| 12 | 10-69079 | SCREW, DISTRIBUTOR LEAD CLIP (7/16") |
| 13 | 8M0084613 | "D" WASHER, CLIP SCREW |
| 14 | 15-21148A1 | SHIM, BEARING TO SPACER |
| 15 | 30-26379 | BALL BEARING, DISTRIBUTOR HOUSING (LOWER) |
| 16 | 15-55853 | SHIM, BEARING TO DISTRIBUTOR HOUSING |
| 17 | 23-53538 | SPACER, ROTOR SHAFT |
| 18 | 53-26406 | RING, RETAINING - BALL BEARING TO DISTRIBUTOR HOUSING |
| 19 | 332-4801 | DISC, ROTOR |
| 20 | 337-4603 | ROTOR, DISTRIBUTOR |
| 21 | 54-60768 | CLAMP, DISTRIBUTOR CAP TO DISTRIBUTOR HOUSING |
| 22 | 10-62802 | SCREW, DISTRIBUTOR CAP CLAMP (1 1/8") |
| 23 | 11-26768 | NUT, DISTRIBUTOR CAP CLAMP SCREW |
| 24 | 27-55896 | GASKET, DISTRIBUTOR CAP TO DISTRIBUTOR HOUSING |
| 25 | 393-4606A2 | DISTRIBUTOR CAP ASSEMBLY |
| 26 | 393-1293A1 | BRUSH AND SPRING ASSEMBLY |
| 27 | 58807A1 | FLAME ARRESTOR ASSEMBLY, DISTRIBUTOR CAP |
| 28 | 84-813715A1 | SPARK PLUG LEAD ASSEMBLY #1, #2 AND #3 |
| 29 | 85-94589 | SLEEVE, SPARK PLUG LEAD TO DISTRIBUTOR |
| 30 | 25-26547 | GROMMET, SPARK PLUG LEAD |
| 31 | 63319 | RETAINER, HIGH TENSION LEADS |
| 31A | 62877 | RETAINER, HIGH TENSION LEADS |
| 32 | 10-28638 | SCREW, HIGH TENSION LEAD RETAINER (3/4") |
| 33 | 33-896329827 | SPARK PLUG (CHAMPION L-77V) |
| 34 | 85-63709A1 | PROTECTOR, SPARK PLUG LEAD |
| 35 | 23-57459 | SLEEVE, SPARK PLUG LEAD (LEADS 1, 2, 3) Comment: ORDER A-36549A1 KIT FOR REPLACEMENT OF LEAD WIRE MARKERS |
| 36 | 84-821945A10 | HIGH TENSION CABLE ASSEMBLY, DISTRIBUTOR CAP TO COIL |
| 37 | 332-2854T01 | BOOT, HIGH TENSION CABLE TO COIL |
| 38 | 25-26547 | GROMMET, HIGH TENSION LEAD |
| 39 | 25-56474 | GROMMET, HIGH TENSION LEAD |
| 40 | 85-94589 | SLEEVE, HIGH TENSION CABLE |
| 41 | 54-22627 | CLIP, HIGH TENSION LEAD TO CRANKCASE |
| 42 | 10-69079 | SCREW, HIGH TENSION CLIP (7/16") |
| 43 | 8M0084613 | "D" WASHER, CLIP SCREW |
| 44 | 59757 | BRACKET, COIL WIRE |
| 45 | 10-69054 | SCREW, BRACKET TO CRANKCASE (5/8") |
| 46 | 13-26992 | LOCKWASHER, BRACKET SCREW |
▶DRIVE SHAFT HOUSING ASSEMBLY (44 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1593-7513A12 | DRIVE SHAFT HOUSING ASSEMBLY (LONG SHAFT) |
| 2 | 19-824928001 | PLUG, PLASTIC - TRIM TAB SCREW HOLD |
| 3 | 16-8M0022145 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (1 3/4") |
| 4 | 16-57935 | STUD, DRIVE SHAFT HOUSING TO GEAR HOUSING (3") |
| 5 | 12-45176 | WASHER, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS (7/16") |
| 6 | 11-8M0204653 | NUT, GEAR HOUSING TO DRIVE SHAFT HOUSING STUDS (7/16") |
| 7 | 47836 | ROD, PUSH - REVERSE LOCK (LONG SHAFT) |
| 8 | 11-60049 | NUT, JAM - PUSH ROD |
| 9 | 47837 | ROD END, PUSH ROD |
| 10 | 24-78203A2 | PIN, PUSH ROD TO REVERSE LOCK |
| 11 | 18-25191 | COTTER PIN, PUSH ROD PIN |
| 12 | 52917 | GUIDE, PUSH ROD |
| 13 | 35474T | COVER, LOWER MOUNT CLAMP |
| 14 | 10-29722 | SCREW, COVER TO LOWER MOUNT CLAMP (5/8") |
| 15 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 16 | 69592F1 | CLAMP, LOWER MOUNT TO DRIVE SHAFT HOUSING |
| 17 | 10-29256 | SCREW, LOWER MOUNT CLAMP TO DRIVE SHAFT HOUSING (7/8") |
| 18 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 19 | 75304T1 | MOUNT, RUBBER - LOWER |
| 20 | 10-75284 | SCREW, LOWER MOUNT (5 1/2") |
| 21 | 12-28051 | WASHER, LOWER MOUNT SCREW |
| 22 | 12-28053 | WASHER, RUBBER - LOWER MOUNT SCREW |
| 23 | 12-61709 | WASHER, LOWER MOUNT SCREW |
| 24 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 25 | 75305 | MOUNT, RUBBER - UPPER |
| 26 | 24929 | PACKING, "U" CUP - UPPER MOUNT COVERS |
| 27 | 79680A1 | COVER, UPPER MOUNT - OUTSIDE HALF |
| 28 | 79680A1 | COVER, UPPER MOUNT - INSIDE HALF |
| 29 | 10-49987 | SCREW, UPPER MOUNT COVER - REAR (1 1/2") |
| 30 | 10-37941 | SCREW, UPPER MOUNT COVER - FRONT (1 3/4") |
| 31 | 11-35888 | NUT, UPPER MOUNT COVER FASTENING SCREW |
| 32 | 12-30520 | WASHER, UPPER MOUNT BOLT (37/64 ID) |
| 33 | 12-30521 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 34 | 12-30519 | WASHER, UPPER MOUNT BOLT (3/8 ID) |
| 35 | 11-23161 | NUT, UPPER MOUNT BOLT |
| 36 | 27-385011 | GASKET, EXHAUST EXTENSION PLATE TO DRIVE SHAFT HOUSING |
| 37 | 11-64809 | NUT, POWERHEAD TO DRIVE SHAFT HOUSING STUDS (5/16") |
| 38 | 695441 | TUBE, EXHAUST (LONG SHAFT) |
| 39 | 32-45679 | TUBE, WATER INLET (LONG SHAFT) |
| 40 | 23-23651 | SLEEVE, WATER INLET TUBE |
| 41 | 38157 | SEAL, TRIM COVER TO DRIVE SHAFT HOUSING |
| 42 | 38154 | STRIP, RETAINING - TRIM COVER SEAL (SIDE) |
| 43 | 38158 | STRIP, RETAINING - TRIM COVER SEAL (REAR) |
| 44 | 10-48408 | SCREW, RETAINING STRIP TO DRIVE SHAFT HOUSING (SELF TAPPING) |
▶FLYWHEEL ASSEMBLY AND STATOR (12 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 19-45907 | PLUG, FLYWHEEL PULLER THREADS |
| 2 | 11-52901 | NUT, FLYWHEEL |
| 3 | 12-33001 | WASHER, FLYWHEEL NUT |
| 4 | 225-4591A7 | FLYWHEEL ASSEMBLY, COMPLETE |
| 5 | 10-32417 | SCREW, FLEXIBLE PLATE TO FLYWHEEL (3/8") |
| 6 | 10-68997 | SCREW, PLATE AND HUB TO FLEXIBLE PLATE (3/4") |
| 7 | 17-26618 | PIN, DOWEL - PULLEY TO FLYWHEEL |
| 8 | 29788 | FLANGE, FLYWHEEL PULLEY |
| 9 | 30306 | PULLEY, FLYWHEEL |
| 10 | 29787 | HUB, FLYWHEEL PULLEY |
| 11 | 398-4634 | STATOR, ALTERNATOR |
| 12 | 10-57021 | SCREW, STATOR TO UPPER END CAP (7/8") |
▶FUEL PUMP, FUEL FILTER AND FUEL LINE (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 55156A5 | FUEL PUMP ASSEMBLY |
| 2 | 21-30430A3 | CHECK VALVE ASSEMBLY |
| 3 | 55278A1 | DIAPHRAGM KIT |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, RETAINER TO HOUSING (1/4") |
| 8 | 10-86885 | SCREW, PUMP MOUNTING (1 5/8'0 |
| 9 | 22-328022 | PLUG, PIPE - FUEL PUMP |
| 10 | 32-60814A1 | FUEL LINE ASSEMBLY, FUEL PUMP/FUEL FILTER HSG. (2 3/4") |
| 11 | 58907 | HOUSING, FUEL FILTER AND COVER |
| 12 | 10-74824 | SCREW, FILTER HOUSING TO TRANSFER PASSAGE COVER (1 1/4") |
| 13 | 12-34437 | WASHER, FUEL FILTER HOUSING MOUNTING SCREW |
| 14 | 27-25851 | GASKET, FILTER COVER (BOTTOM) |
| 15 | 1399-3938 | ELEMENT, FUEL FILTER |
| 16 | 27-25849 | GASKET, FILTER COVER (TOP) |
| 17 | 1399-4791A1 | COVER, FUEL FILTER |
| 18 | 10-25822 | SCREW, FILTER COVER FASTENING (5/8") |
| 19 | 27-25848 | GASKET, FILTER COVER FASTENING SCREW |
| 20 | 32-38527 | FUEL LINE, FILTER COVER TO UPPER CARBURETOR (5 7/8") |
| 21 | 22-8M0123050 | ELBOW, (45O) - UPPER CARBURETOR |
| 21A | 22-36567 | ELBOW, LOWER CARBURETOR |
| 22 | 32-62989A1 | FUEL LINE, FILTER COVER TO LOWER CARBURETOR (7 1/8") |
| 23 | 32-55829 | FUEL LINE ASSEMBLY, FUEL PUMP TO ADAPTOR (15") |
| 24 | 22-30177 | NUT, FUEL LINE |
| 25 | 22-30175 | SLEEVE, FUEL LINE |
| 26 | 22-30468 | CONNECTOR, FUEL LINE |
| 27 | 30186 | ADAPTOR, CHECK UNIT (FUEL LINE) |
| 28 | 30187 | STEM, CHECK UNIT ADAPTOR |
| 29 | 25-16524 | "O" RING, ADAPTOR STEM |
| 30 | 24-30189 | SPRING, ADAPTOR STEM |
| 31 | 30188 | CUP WASHER, ADAPTOR |
| 32 | 10-24644 | SCREW, ADAPTOR TO FRONT SUPPORT BRACKET (1 3/8") |
| 33 | 11-8M0207775 | NUT, ADAPTOR FASTENING SCREW |
▶GEAR HOUSING ASSEMBLY, COMPLETE (PAGE 1) (48 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1643-6038A20 | GEAR HOUSING ASSEMBLY, COMPLETE (LONG SHAFT) Comment: SEE NOTE BELOW |
| 1 | 1643-6038A6 | GEAR HOUSING ASSEMBLY |
| 2 | 17-21438 | PIN, DOWEL - GEAR HOUSING |
| 3 | 16-33778 | STUD, WATER PUMP BODY/BASE TO GEAR HOUSING (2 5/8") |
| 4 | 16-8M0034453 | STUD, GEAR HOUSING TO DRIVE SHAFT HOUSING (2 3/16") |
| 5 | 31-62091T | BEARING, ROLLER - DRIVE SHAFT |
| 6 | 92815 | PLATE, SUPPORT - EXHAUST TUBE SEAL |
| 7 | 37721001 | SEAL, EXHAUST TUBE |
| 8 | 43-60245 | GEAR, PINION - DRIVE SHAFT |
| 9 | 11-55910 | NUT, PINION GEAR TO DRIVE SHAFT |
| 10 | 27-32771 | GASKET, WATER PUMP BASE TO GEAR HOUSING |
| 11 | 25-26855 | "O" RING, WATER PUMP BASE |
| 12 | 46-77516A1 | WATER PUMP BASE ASSEMBLY |
| 13 | 26-79831 | OIL SEAL, WATER PUMP BASE |
| 14 | 26-90562 | OIL SEAL, WATER PUMP BASE |
| 15 | 17-35973 | DOWEL PIN, WATER PUMP BASE TO WATER PUMP BODY |
| 16 | 27-19553 | GASKET, LOWER - WATER PUMP BASE TO FACE PLATE |
| 17 | 32768 | PLATE, FACE - WATER PUMP BASE TO WATER PUMP BODY |
| 18 | 27-19551 | GASKET, UPPER - FACE PLATE TO WATER PUMP BODY |
| 19 | 47-89983T | IMPELLER, WATER PUMP |
| 20 | 28-8M0032837 | KEY, IMPELLER DRIVE |
| 21 | 46-77822A1 | WATER PUMP BODY ASSEMBLY |
| 22 | 48753 | INSERT, WATER PUMP BODY |
| 23 | 26-32121 | OIL SEAL, WATER PUMP BODY |
| 24 | 12-8M0204649 | WASHER, WATER PUMP BODY AND BASE STUDS |
| 25 | 11-826709109 | NUT, WATER PUMP BODY AND BASE STUDS |
| 26 | 26-38452 | SEAL, WATER PUMP BODY TO WATER TUBE |
| 27 | 12-38453 | WASHER, CUPPED - WATER TUBE SEAL |
| 28 | 25-20273 | RING, RUBBER - CENTRIFUGAL SLINGER |
| 29 | 10-79953Q04 | SCREW, GREASE FILLER AND VENT HOLE |
| 30 | 12-191833 | WASHER, GREASE FILLER AND VENT HOLE SCREW |
| 31 | 19-48750 | PLUG, GEAR HOUSING FLUSHING HOLE |
| 32 | 12-8M0204663 | WASHER, GEAR HOUSING FLUSHING HOLE |
| 33 | 76063A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 34 | 53-29641 | CLIP, RETAINING - SHIFT SHAFT |
| 35 | 25-25439 | "O" RING, SHIFT SHAFT BUSHING |
| 36 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 37 | 26-24590 | OIL SEAL, SHIFT SHAFT BUSHING (LOWER) |
| 38 | 26-892361 | OIL SEAL, SHIFT SHAFT BUSHING (UPPER) |
| 39 | 12-31266 | WASHER, RUBBER - SHIFT SHAFT BUSHING |
| 40 | 78036 | BASE, LOWER - REVERSE LOCKING |
| 41 | 43308T1 | CAM, REVERSE LOCKING |
| 42 | 45-76088A2 | DRIVE SHAFT ASSEMBLY (LONG SHAFT) |
| 43 | 24-20254 | SPRING, COMPRESSION - DRIVE SHAFT |
| 44 | 17-30545 | PIN, DRIVE SHAFT |
| 45 | 88181 | SLEEVE, LUBRICATION - DRIVE SHAFT |
| 46 | 15-20929A1 | SHIM, BEARING TO GEAR HOUSING (.002-3-5-10) |
| 47 | 31-38146A1 | ROLLER BEARING ASSEMBLY, TAPERED - DRIVE SHAFT |
▶GEAR HOUSING ASSEMBLY, COMPLETE (PAGE 2) (36 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1643-6038A20 | GEAR HOUSING ASSEMBLY, COMPLETE SEE NOTE BELOW |
| 1 | 1643-6038A6 | GEAR HOUSING ASSEMBLY (SEE PAGE 30 FOR BREAKDOWN) |
| 48 | 760394 | CAM, SHIFT |
| 49 | 38441 | FOLLOWER, CAM |
| 50 | 20843 | SLIDE, CROSS PIN |
| 51 | 24-39845 | SPRING, COMPRESSION - CAM FOLLOWER |
| 52 | 15-38374A1 | SHIM, BEARING CUP TO GEAR HOUSING (.002-3-5-10) |
| 53 | 31-38356A1 | TAPERED ROLLER BEARING ASSEMBLY |
| 54 | 31-21739 | BEARING, ROLLER - FORWARD GEAR |
| 55 | 43-60247T5 | FORWARD GEAR ASSEMBLY |
| 56 | 52-92911T | RATCHET, SLIDING CLUTCH |
| 57 | 17-8M0020942 | PIN, CROSS - RATCHET TO PROPELLER SHAFT |
| 58 | 24-38114 | SPRING, RETAINING - CROSS PIN |
| 59 | 44-75365 | SHAFT PROPELLER |
| 60 | 43-79159T | REVERSE GEAR ASSEMBLY |
| 61 | 15-20927A1 | SHIM, THRUST WASHER TO GEAR HOUSING (.002-3-5-10) |
| 62 | 12-32004 | WASHER, THRUST - REVERSE GEAR |
| 63 | 30-20839T | BEARING, BALL - REVERSE GEAR |
| 64 | 25-31986 | "O" RING, BEARING CARRIER |
| 65 | 69386T1 | BEARING CARRIER ASSEMBLY |
| 66 | 31-21700 | BEARING, ROLLER - BEARING CARRIER |
| 67 | 26-56788 | OIL SEAL, BEARING CARRIER (DOUBLE LIP) |
| 68 | 28-30281 | KEY, LOCATING - BEARING CARRIER |
| 69 | 14-53012 | TAB WASHER, GEAR HOUSING COVER |
| 70 | 11-87763 | COVER, GEAR HOUSING |
| 71 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 72 | 10-66024 | SCREW, TRIM TAB TO GEAR HOUSING (1 3/4") |
| 73 | 12-8M0214963 | WASHER, DRIVE SHAFT HOUSING STUD (3/8") |
| 74 | 11-8M0204726 | NUT, DRIVE SHAFT HOUSING TO GEAR HOUSING (3/8") |
| 75 | 12-45176 | WASHER, DRIVE SHAFT HOUSING STUD (7/16") |
| 76 | 11-8M0204653 | NUT, DRIVE SHAFT HOUSING TO GEAR HOUSING (7/16") |
| 77 | 65758 | THRUST HUB ASSEMBLY, FRONT |
| 78 | 12-62123 | WASHER, CUPPED - THRUST HUB |
| 79 | 62124A1 | THRUST HUB ASSEMBLY, REAR |
| 80 | 12-31992 | WASHER, CUPPED - THRUST HUB |
| 81 | 11-82671120 | NUT, PROPELLER |
▶MISCELLANEOUS PARTS/ACCESSORIES (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 79-73370A3 | TACHOMETER ASSEMBLY |
▶SHIFT LINKAGE AND EXHAUST PLATE (39 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 814283A2 | BRACKET, ANCHOR - CONTROL CABLES |
| 2 | 60283A1 | LINK ASSEMBLY, SHIFT SHAFT AND ANCHOR BRACKET |
| 3 | 24-20099 | SPRING, LINK TO ANCHOR BRACKET |
| 4 | 37896 | GUIDE BLOCK, LINK |
| 5 | 52100 | WEAR PLATE, NYLON - LINK |
| 6 | 8M0036768 | LATCH, LINK TO ANCHOR BRACKET |
| 7 | 12-69056 | WASHER, LINK LATCH |
| 8 | 11-826709109 | NUT, LINK ATTACHING |
| 9 | 60304A1 | SHIFT SHAFT ASSEMBLY, UPPER (LONG SHAFT) |
| 10 | 93960A1 | COUPLING, SHIFT SHAFT |
| 11 | 13-29720 | WASHER, WAVE - SHIFT SHAFT TO LINK |
| 12 | 23-26600 | BUSHING, NYLON - SHIFT SHAFT TO LINK |
| 13 | 12-24664 | WASHER, LINK (SHIFT SHAFT END) |
| 14 | 39519 | CUP, RETAINER - ANCHOR BRACKET |
| 15 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING |
| 16 | 17-47175 | PIN, LOCKING LEVER AND COVER FASTENING |
| 17 | 39536 | LINK, LOCKING LEVER TO COVER |
| 18 | 39667 | COVER, NYLON - SHIFT CABLE |
| 19 | 10-53167T | SCREW, ANCHOR BRACKET TO CRANKCASE AND CYL BLOCK (7/8") |
| 20 | 27-60317 | GASKET, POWERHEAD TO EXHAUST PLATE |
| 21 | 74007A1 | EXHAUST PLATE ASSEMBLY |
| 22 | 16-8M0034449 | STUD, EXHAUST PLATE TO DRIVE SHAFT HOUSING (1 11/16") |
| 23 | 16-68166 | STUD, EXHAUST PLATE TO DRIVE SHAFT HOUSING (2 1/8") |
| 24 | 26-38452 | SEAL, WATER INLET TUBE |
| 25 | 12-38453 | WASHER, NYLON - WATER INLET TUBE SEAL |
| 26 | 38500 | RETAINER, WATER INLET TUBE SEAL |
| 27 | 10-69069 | SCREW, RETAINER TO EXHAUST PLATE (3/4") |
| 28 | 60307 | SEAL, EXHAUST PLATE |
| 29 | 60306 | STRIP, RETAINING - EXHAUST PLATE SEAL |
| 30 | 10-62568 | SCREW, RETAINING STRIP TO EXHAUST PLATE (3/8") |
| 31 | 90435 | MOUNT, RUBBER - EXHAUST PLATE TO REAR COWL SUPPORT |
| 32 | 49651A1 | GROUND STRAP ASS'Y, EXHAUST PLATE TO REAR COWL SUPPORT |
| 33 | 12-69057 | WASHER, RUBBER MOUNT ATTACHING |
| 34 | 11-8267089 | NUT, RUBBER MOUNT TO EXHAUST PLATE |
| 35 | 10-35386 | SCREW, EXHAUST PLATE TO CYLINDER BLOCK (1") |
| 36 | 27-385011 | GASKET, ADAPTOR PLATE TO DRIVE SHAFT HOUSING |
| 37 | 58911 | EXHAUST TUBE, ADAPTOR |
| 38 | 27-602801 | GASKET, EXHAUST TUBE TO EXHAUST PLATE |
| 39 | 10-49668 | SCREW, EXHAUST TUBE TO EXHAUST PLATE (3/4") |
▶STARTER MOTOR, STARTER SOLENOID, RECTIFIER & WIRING HARNESS (47 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 332-4796A6 | SWITCH BOX ASSEMBLY, COMPLETE |
| 2 | 11-45076 | NUT, SWITCH TERMINAL |
| 3 | 10-64022 | SCREW, SWITCH BOX TO FRONT SUPPORT BRACKET (2 1/8") |
| 4 | 10-63506 | SCREW, SWITCH BOX TO FRONT SUPPORT BRACKET (2 1/8") |
| 5 | 11-8M0207775 | NUT, SWITCH BOX SCREW ATTACHING |
| 6 | 54-22875 | CLAMP, ELECTRICAL LEADS TO SWITCH BOX |
| 7 | 10-69079 | SCREW, CLAMP TO SWITCH BOX (7/16") |
| 8 | 8M0084613 | "D" WASHER, CLAMP FASTENING SCREW |
| 9 | 56318A5 | CABLE ASSEMBLY, COIL TO SWITCH BOX (GREEN) |
| 10 | 8M0058226 | RECTIFIER ASSEMBLY |
| 11 | 11-45076 | NUT, RECTIFIER TERMINAL |
| 12 | 10-25764 | SCREW, RECTIFIER TO FRONT SUPPORT BRACKET (1/2") |
| 13 | 50-44369A1 | STARTER MOTOR ASSEMBLY |
| 14 | 8M0043376 | STOP, RUBBER - STARTER MOTOR |
| 15 | 84-60872 | CABLE, STARTER TO FRONT SUPPORT BRACKET (9 1/2") |
| 16 | 10-69035 | SCREW, CABLE TO STARTER MOTOR (5/8") |
| 17 | 84-68890 | CABLE, STARTER SOLENOID TO STARTER MOTOR (YELLOW) |
| 18 | 13-26992 | LOCKWASHER, STARTER MOTOR TERMINAL |
| 19 | 11-20890 | NUT, STARTER MOTOR TERMINAL |
| 20 | 23-8M0034918 | COLLAR, RUBBER - STARTER MOTOR MOUNT |
| 21 | 23-56774 | SPACER, COLLAR TO MOUNTING BRACKETS |
| 22 | 89-853654A1 | STARTER SOLENOID |
| 23 | 10-69054 | SCREW, SOLENOID TO FRONT SUPPORT BRACKET (5/8") |
| 24 | 13-26992 | LOCKWASHER, SOLENOID MOUNTING SCREW |
| 25 | 10-98256 | SCREW, SOLENOID TO FRONT SUPPORT BRACKET (1/2") |
| 26 | 11-8M0207775 | NUT, SOLENOID MOUNTING SCREW |
| 27 | 10,13-26996 | LOCKWASHER, SOLENOID TERMINAL |
| 28 | 10,11-68219 | NUT, SOLENOID TERMINAL |
| 29 | 13-8M0204647 | LOCKWASHER, SOLENOID TERMINAL (5/16") |
| 30 | 11-21908 | NUT, SOLENOID TERMINAL (5/16") |
| 31 | 84-61378A2 | CABLE, BATTERY TO STARTER SOLENOID |
| 32 | 84-60795 | WIRING HARNESS (INTERNAL) |
| 33 | 10-72202 | SCREW, WIRING HARNESS TO FRONT SUPPORT BRACKET (1 1/4") |
| 34 | 11-46438 | NUT, WIRING HARNESS SCREW |
| 35 | 60114A1 | BRACKET ASSEMBLY, WIRING HARNESS |
| 36 | 26-60925 | SEAL, WIRING HARNESS BRACKET |
| 37 | 10-69082 | SCREW, WIRING HARNESS BRACKET MOUNTING (2 3/8") |
| 38 | 25-92012 | GROMMET, WIRING HARNESS BRACKET SCREW |
| 39 | 61990 | STA-STRAP, INTERNAL WIRING HARNESS |
| 40 | 332-4895T2 | IGNITION COIL (3 3/8" HIGH) Comment: TO IDENTIFY COIL, MEASURE AS SHOWN IN DIAGRAM |
| 41 | 72015 | PAD, RUBBER - COIL Comment: TO IDENTIFY COIL, MEASURE AS SHOWN IN DIAGRAM |
| 42 | 63195 | COVER, COIL (USE WITH A-332-4595A1 COIL) Comment: TO IDENTIFY COIL, MEASURE AS SHOWN IN DIAGRAM |
| 43 | 62094 | BRACKET, COIL MOUNTING |
| 44 | 10-88856 | SCREW, COIL AND BRACKET TO CYLINDER BLOCK (2") |
| 45 | 84-60466A1 | CABLE ASSEMBLY, GROUND - MOUNTING SCREW |
| 46 | 10,13-26996 | LOCKWASHER, IGNITION COIL TERMINAL |
| 47 | 10,11-45076 | NUT, IGNITION COIL TERMINAL |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 650 (3 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
- Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
- Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
Productos vistos recientemente
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
- Choosing a selection results in a full page refresh.