Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
OEM and aftermarket replacement parts for Mercury 60 (3 CYL.). Scroll down for exploded parts diagrams (26), specifications, and maintenance reference.
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
Default Title
🔎 Mercury 60 (3 CYL.) Reference Library — Exploded parts diagrams (26 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 60 (3 CYL.) is a 4-Stroke, Inline 4-Cylinder, EFI, SOHC outboard motor. Suited for bay boats, pontoons, and center-console fishing boats requiring reliable mid-range power.
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, Inline 4-Cylinder, EFI, SOHC |
| Horsepower | 60 HP |
| Displacement | 995 cc |
| Bore x Stroke | 65 mm x 75 mm |
| Spark Plug (Type & Gap) | NGK IZFR6F-11 |
| Engine Oil Capacity | 3.0 L (3.17 quart) |
| Recommended Engine Oil | SAE 25W-40 Mercury FourStroke Oil |
| Gear Case Oil Capacity | 440 mL (14.9 fl oz) |
| Idle Speed (in gear) | 650 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5500-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Below are common maintenance scenarios for the Mercury 60 (3 CYL.):
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 60 (3 CYL.).
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1301931 | AUTO-BLEND |
| 1 | 16612 | TANK KIT, Oil |
| 2 | 13996 | HANDLE KIT |
| 3 | 36-13986 | CAP, OIL TANK |
| 4 | 16614 | HARDWARE KIT |
| 5 | 19-13979 | PLUG KIT, Drain |
| 6 | 16611 | DIAPHRAGM KIT |
| 7 | 13990 | BRACKET |
| 8 | 13993 | BAND |
| 9 | 13983 | BRACKET (LEFT) |
| 10 | 13984 | BRACKET (RIGHT) |
| 11 | 16613 | COVER |
| 12 | 35-13985 | FILTER/SENSOR KIT, Oil |
| 13 | 13987 | HORN KIT |
| 14 | 84-13988 | HARNESS ASSEMBLY |
| 15 | 88-13989 | FUSE (.5 AMP) |
| 16 | 35-18089 | FILTER KIT, Fuel |
| 17 | 32-13992 | VINYL TUBE |
| 18 | 32-13995 | TUBE KIT, Fuel |
| 19 | 15387A1 | STRAINER ASSEMBLY, Oil |
| 20 | 21-16615 | CHECK VALVE KIT |
| 21 | 27-16616 | GASKET KIT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| -- | 812953 | REPAIR PARTS KIT |
| 1 | 1379-6071A39 | CARBURETOR ASSEMBLY Comment: (60) |
| 2 | 1399-6249 | JET, Main (.096), VENT BOWL |
| 3 | 192711 | NEEDLE/SEAT KIT, Inlet |
| 4 | NSS | NOT SOLD SEPARATE, GASKET-INLET NEEDLE AND SEAT |
| 5 | 52106A1 | VENTURI, Plastic |
| 6 | NSS | NOT SOLD SEPARATE, NOZZLE |
| 7 | NSS | NOT SOLD SEPARATE, INLET NEEDLE |
| 8 | NSS | NOT SOLD SEPARATE, SPRING-IDLE MIXTURE |
| 9 | NSS | NOT SOLD SEPARATE, PIN-FLOAT |
| 10 | NSS | NOT SOLD SEPARATE, LEVER-FLOAT |
| 11 | 19273 | FLOAT |
| 12 | 1395-7835 | BOWL, Fuel Comment: (60) |
| 13 | NSS | NOT SOLD SEPARATE, GASKET-FUEL BOWL |
| 14 | NSS | NOT SOLD SEPARATE, SCREW-FUEL BOWL |
| 15 | 1395-6199 | PLUG, MAIN JET |
| 16 | 1395-6207 | JET, (.072), MAIN Comment: (60) |
| 17 | NSS | NOT SOLD SEPARATE, GASKET-MAIN JET PLUG |
| 19 | NSS | NOT SOLD SEPARATE, WELCH PLUG (9/16") |
| 20 | 1395-4807 | SHAFT, Throttle |
| 21 | 1395-7833 | VALVE, Throttle Comment: (60) |
| 22 | NSS | NOT SOLD SEPARATE, SCREW-VALVE TO THROTTLE SHAFT |
| 23 | 1395-6204 | SEAL, THROTTLE SHAFT |
| 24 | 1395-6203 | WASHER, THROTTLE SHAFT |
| 25 | NSS | NOT SOLD SEPARATE, SPRING-THROTTLE RETURN |
| 26 | 1395-6198 | VALVE ASSEMBLY, ENRICHMENT |
| 27 | NSS | NOT SOLD SEPARATE, SCREW-ENRICHMENT BRACKET |
| 28 | NSS | NOT SOLD SEPARATE, WELCH PLUG (7/16") |
| 29 | 27-733771 | GASKET, CARBURETOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 60549A7 | SOLENOID ASSEMBLY, Choke |
| 2 | 10,13-26996 | LOCKWASHER, Stainless Steel, CHOKE SOLENOID TERMINAL |
| 3 | 10-32,11-68219 | NUT, Stainless Steel, CHOKE SOLENOID TERMINAL |
| 4 | 10-78841 | SCREW, CHOKE SOLENOID |
| 5 | 11-29250 | NUT, (.312-24), CHOKE SOLENOID SCREWS |
| 6 | 89008A2 | PLUNGER ASSEMBLY, CHOKE SOLENOID |
| 7 | 76076A1 | ROD ASSEMBLY, Choke |
| 8 | 90242A1 | KNOB ASSEMBLY |
| 9 | 10-77137 | SCREW, (.190-16 x .620), WIRE TO CHOKE KNOB |
| 10 | 25-20116 | GROMMET, CHOKE KNOB |
| 12 | 10-52743 | SCREW, (.312-18 x 3.750), CARBURETOR TO CRANKCASE |
| 13 | 77583 | LEVER, THROTTLE |
| 14 | 10-60293 | SCREW, (#5-40 x .500), LEVER TO CARBURETOR |
| 15 | 60292A1 | COUPLING ASSEMBLY |
| 16 | 28-89694 | KEY, THROTTLE SHAFT COUPLING |
| 17 | 11-92500 | PUSH NUT, ROLLER - COUPLING |
| 18 | 10-60293 | SCREW, (#5-40 x .500), ROLLED WASHER TO COUPLING |
| 19 | 91996A1 | PLATE ASSEMBLY, CARBURETOR |
| 20 | 71090 | SEAL, CARBURETOR PLATE |
| 21 | 10-20367 | SCREW, PLATE TO CARBURETOR (7/16") |
| 22 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, PLATE SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1440-8394A3 | CLAMP BRACKET ASSEMBLY Comment: (MARINER) |
| 2 | 10-78492A1 | THUMB SCREW ASSEMBLY |
| 3 | 12-78493 | WASHER, THUMB SCREW |
| 4 | 10-78495 | SCREW, WASHER TO THUMB SCREW |
| 5 | 75043 | CAP, THUMB SCREW |
| 6 | 8M0041936 | TILT TUBE |
| 7 | 12-52864 | WASHER, TILT TUBE |
| 8 | 11-858869 | NUT, (.875-14), TILT TUBE |
| 9 | 53078 | CAP, PLASTIC - TILT TUBE |
| 10 | 98877 | SHOCK MOUNT, Upper |
| 10A | 55-28416 | PIN (POWER TRIM) |
| 11 | 23-73203 | BUSHING, CLAMP BRACKET |
| 12 | 23-59623 | SPACER, CLAMP BRACKET STUD |
| 13 | 16-59625 | STUD, CLAMP BRACKET |
| 14 | 13-8M0204647 | LOCKWASHER, (.312), CLAMP BRACKET STUD |
| 15 | 11-28770 | NUT, (.312-24) Stainless Steel, CLAMP BRACKET STUD |
| 16 | 17-8M0026068 | PIN ASSEMBLY, Tilt Lock |
| 17 | 32-28052 | SLEEVE, RUBBER - TILT LOCK PIN |
| 18 | 10-89673 | SCREW, (.375-16 x 5.00), CLAMP BRACKET TO TRANSOM |
| 19 | 12-68300 | WASHER, (..88 x .39 x .06), CLAMP BRACKET BOLT |
| 20 | 11-82671112 | NUT, CLAMP BRACKET BOLT |
| 21 | 10-69375A1 | SCREW, (.500-20 x .625), UPPER AND LOWER SHOCK PIN |
| 22 | 98876 | STRAP, TILT STOP |
| 23 | 98878 | PIN, LOWER MOUNT |
| 24 | 24-98875 | SPRING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 73641A2 | BRACKET, TOP (MARINER) |
| 2 | 62444 | SEAL, RUBBER - TOP BRACKET/MOUNTING PLATE |
| 3 | 79652 | CLIP, SUPPORT BRACKET |
| 4 | 10-48409 | SCREW, (#10-16 x .625) Stainless Steel, CLIP TO SUPPORT |
| 5 | 79490 | SHIELD, FLYWHEEL |
| 6 | 10-37656 | SCREW, (#10-32 x .620), SHIELD TO SUPPORT BRACKET |
| 7 | 10-48408 | SCREW, (#10-16 x .500), SHIELD TO SUPPORT BRACKET |
| 8 | 91891 | WEAR PLATE, SOUND ATTENUATOR |
| 9 | 74510A2 | BRACKET, COWL SUPPORT - REAR |
| 10 | 698761 | SEAL, REAR BRACKET AND TOP BRACKET |
| 11 | 90435 | MOUNT, RUBBER - REAR SUPPORT BRACKET |
| 12 | 12-69057 | WASHER, RUBBER MOUNT |
| 13 | 11-8M0207775 | NUT, (1/4-28X7/32), RUBBER MOUNT |
| 14 | 269011 | BUMPER, RUBBER - REAR SUPPORT BRACKET |
| 15 | 60116 | BRACE, COWL SUPPORT BRACKET (TOP) |
| 16 | 10-76596 | SCREW, (.250-20 x 1.250), SUPPORT BRACKET |
| 17 | 90435 | MOUNT, RUBBER - FRONT SUPPORT BRACKET |
| 18 | 11-36069 | NUT, RUBBER MOUNT |
| 19 | 71097 | BRACKET, RUBBER MOUNT |
| 20 | 10-824941 | SCREW, (.312-18 x .750), BRACKET TO CRANKCASE |
| 21 | 973481 | ATTENUATOR, SOUND |
| 22 | 88684 | COVER, MANUAL CHOKE |
| 23 | 10-23015 | SCREW, (.190-32 x 1.00), COVER TO TOP COVER |
| 24 | 12-8M0204690 | WASHER, COVER SCREW |
| 25 | 73986 | MANIFOLD, Air |
| 26 | 10-69093 | SCREW, (.250-20 x 1.50), AIR MANIFOLD |
| 27 | 90435 | MOUNT, RUBBER - FRONT SUPPORT |
| 28 | 11-8M0207775 | NUT, (1/4-28X7/32), RUBBER MOUNT |
| 29 | 76410 | SEAL, FUEL CONNECTOR - SOUND ATTENUATOR |
| 30 | 76578 | COVER, SOUND ATTENUATOR (FRONT) |
| 31 | 10-37571 | SCREW, (.190-32 x .500), FRONT COVER |
| 32 | 19-73336 | PLUG, FRONT COVER |
| 33 | 76251A1 | PLATE ASSEMBLY, FRONT COVER |
| 34 | 76264 | LATCH, FRONT COVER |
| 35 | 24-60295 | SPRING, FRONT COVER LATCH |
| 36 | 10-28635 | SCREW, (.250-20 x .620) Stainless Steel, COVER PLATE TO SUPPORT BRACKET |
| 37 | 87764 | BRACKET, REAR - LOWER MOUNT |
| 38 | 10-76596 | SCREW, (.250-20 x 1.250), REAR BRACKET ATTACHING |
| 39 | 90435 | MOUNT, RUBBER - REAR COWL SUPPORT |
| 40 | 88238A3 | CABLE ASSEMBLY, Ground |
| 41 | 12-69057 | WASHER, RUBBER MOUNT |
| 42 | 11-8M0207775 | NUT, (1/4-28X7/32), RUBBER MOUNT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 2142-6228A3 | TOP COWL ASSEMBLY, STARBOARD (LIGHT GRAY)(MARINER) |
| 2 | 26-60297 | SEAL, FUEL CONNECTOR - COWL |
| 3 | 2141-6227A17 | TOP COWL ASSEMBLY, PORT (LIGHT GRAY)(MARINER) |
| 4 | 26-60298 | SEAL, CONTROL CABLES - COWL |
| 5 | 89717T | BRACKET, COWL SEALING - REAR |
| 6 | 698761 | SEAL, REAR BRACKET |
| 7 | 90980 | BRACKET, COWL HINGE |
| 8 | 10-75794 | SCREW, HINGE BRACKET (UPPER) (1-1/8") |
| 9 | 75805 | CAP, HINGE BRACKET SCREW (UPPER) |
| 10 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, HINGE BRACKET SCREW |
| 11 | 12-37998 | WASHER, HINGE BRACKET SCREW |
| 12 | 12-75806 | WASHER, HINGE BRACKET SCREW (UPPER) |
| 13 | 90979 | PIN, COWL HINGE |
| 14 | 10-28782 | SCREW, (.312-18 x .880) Stainless Steel, PIN TO COWL |
| 15 | 13-8M0204647 | LOCKWASHER, (.312), PIN ATTACHING SCREW |
| 16 | 46785A5 | LATCH ASSEMBLY, Cowl |
| 17 | 62628 | BARREL, COWL LATCH |
| 18 | 10-31312 | SCREW, (#10-32 x 0.875), LATCH ASSEMBLY TO BARREL |
| 19 | 15222 | BAR, ADJUSTMENT - COWL LATCH |
| 20 | 62629 | BARREL, COWL LATCH |
| 21 | 24-62624 | SPRING, TENSION - COWL LATCH |
| 22 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel, ADJUSTMENT BAR TO BARREL |
| 23 | 10-32,11-859124 | NUT, Stainless Steel, ADJUSTMENT BAR TO BARREL |
| 24 | 2143-7254A12 | FRONT COVER (LIGHT GRAY)(MARINER) |
| 25 | 795511 | BLANKET, SOUND ABSORBING |
| 26 | 61158T | HOOK, FRONT COVER |
| 27 | 10-69570 | SCREW, (#10-16 x .750), HOOK TO FRONT COVER |
| 28 | 47341A11 | ROPE AND HANDLE KIT, Manual/Emergency Start Comment: (FOR MANUAL STARTING ONLY) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 462-8839A2 | CRANKSHAFT ASSEMBLY |
| 2 | 30-64424T | BEARING, BALL - LOWER AND UPPER |
| 3 | 15-22369A1 | SHIM SET, LOWER BEARING TO CRANKSHAFT |
| 4 | 542-7509A3 | BEARING ASSEMBLY, Main (VALVE TYPE) |
| 5 | 17-20032 | PIN, Dowel, MAIN BEARING |
| 6 | 17-60282 | PIN, Dowel (STEPPED) |
| 7 | 17-65855 | PIN, Dowel, REED STOP |
| 8 | 34-66051A1 | REED SET, MATCHED - MAIN BEARING |
| 9 | 34-65946 | STOP, Reed |
| 10 | 10-77280 | SCREW, (.190-32 x .560), REED STOP MOUNTING |
| 11 | 10-32,11-20110 | NUT, , REED STOP MOUNTING SCREW |
| 12 | 10-45775 | SCREW, (#12-28 x .560) , MAIN BEARING CLAMPING |
| 13 | 11-45774 | NUT, MAIN BEARING SCREW CLAMPING |
| 14 | 26113T | RACE, OUTER (PAIR) |
| 15 | 53-26933 | RING, Snap, OUTER RACE CLAMPING |
| 16 | 29-714221 | BEARING, Needle |
| 17 | 774-9137A14 | PISTON ASSEMBLY (.030 O.S.) Comment: (60) |
| 18 | 53-857196 | RING, Lock, PISTON PIN |
| 19 | 39-88392A12 | RING SET, Piston - .030 Oversize |
| 20 | 624-8101A3 | CONNECTING ROD ASSEMBLY |
| 21 | 10-91012 | SCREW, (.250-28 Special), CAP TO CONNECTING ROD - W/O NUT |
| 22 | 31-62596A1 | BEARING ASSEMBLY |
| 23 | 29-8M0214934 | BEARING, NEEDLE - PISTON PIN |
| 24 | 12-8M0032839 | WASHER, NEEDLE LOCATING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 97470T87 | POWERHEAD Comment: (60) |
| 1 | 865-8362A11 | CYLINDER BLOCK ASSEMBLY Comment: (60) |
| 2 | 66517 | RESTRICTOR, CRANKCASE BLEED |
| 3 | 27-60286 | GASKET, CRANKCASE TO CYLINDER BLOCK |
| 4 | 16-68201 | STUD, CRANKCASE TO DRIVE SHAFT HOUSING (2-1/4") |
| 5 | 17-43044 | PIN, Dowel, CRANKCASE TO CYLINDER BLOCK |
| 6 | 17-20323 | PIN, Dowel, CYLINDER BLOCK TO MAIN BEARING |
| 7 | 16-92345 | STUD, CYLINDER BLOCK (4-3/8") |
| 8 | 16-68167 | STUD, (.312-18/.312-24 x 2.560), CYLINDER BLOCK - TRANSFER SIDE |
| 9 | 76975 | COVER, STARTER MOTOR (BOTTOM) |
| 10 | 10-815549 | SCREW, (.312-18 x 2), STARTER MOTOR COVER |
| 11 | 13-8M0204647 | LOCKWASHER, (.312), STARTER MOTOR COVER SCREW |
| 12 | 79735A1 | COVER, STARTER MOTOR (TOP) |
| 13 | 10-35385 | SCREW, (.312-18 x 1-3/4), STARTER MOTOR COVER |
| 14 | 10-22039 | SCREW, (.312-24 x 2.75), CRANKCASE TO CYLINDER BLOCK |
| 15 | 12-26020 | WASHER, CRANKCASE SCREW (BOTTOM) |
| 16 | 11-29250 | NUT, (.312-24), CRANKCASE SCREW (BOTTOM) |
| 17 | 79736 | INDICATOR, TIMING |
| 18 | 10-58414 | SCREW, INDICATOR TO STARTER COVER |
| 19 | 12-56720 | WASHER, (.330 x .750 x .060) Stainless Steel, INDICATOR SCREW |
| 20 | 1161-6357A1 | END CAP ASSEMBLY, UPPER |
| 21 | 25-64966 | O-RING, (3.739 x .070), END CAP |
| 22 | 26-41953 | SEAL, END CAP |
| 23 | 10-812618 | SCREW, UPPER END CAP MOUNTING (1") |
| 24 | 15-73644A1 | SHIM, UPPER END CAP (.006-8-10) |
| 25 | 1144-6691A1 | END CAP ASSEMBLY, LOWER |
| 26 | 25-32546 | O-RING, END CAP |
| 27 | 26-41953 | SEAL, END CAP |
| 28 | 10-30225 | SCREW AND LOCKWASHER, (.312-18 x 1.00), LOWER END CAP MOUNTING |
| 29 | 15-20085A1 | SHIM SET, LOWER END CAP (.002-3-5-10) |
| 30 | 22-291112 | CONNECTOR, HOSE TO CYLINDER BLOCK |
| 31 | 32-774572 | HOSE, (48.00 Inches Bulk), TELL TALE (15") |
| 32 | 23-90882 | SLEEVE, TELL TALE HOSE |
| 33 | 69555001 | NOZZLE, TELL TALE - REAR SUPPORT BRACKET |
| 34 | 54-70705 | CLAMP, TELL TALE NOZZLE |
| 35 | 10-48408 | SCREW, (#10-16 x .500), TELL TALE CLAMP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1593-7513A12 | HOUSING ASSEMBLY, Driveshaft Comment: (LONG) |
| 2 | 19-64649 | PLUG, TRIM TAB SCREW HOLE |
| 3 | 16-8M0022145 | STUD, (.375-16/.375-24 x 1.750), DRIVE SHAFT HOUSING |
| 4 | 16-57935 | STUD, DRIVE SHAFT HOUSING (3") |
| 5 | 12-65791 | WASHER, GEAR HOUSING STUDS (7/16") |
| 6 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, GEAR HOUSING STUDS |
| 7 | 923373 | MOUNT, RUBBER - UPPER |
| 8 | 96401 | SEAL, UPPER MOUNT |
| 9 | 12-27727 | WASHER, UPPER MOUNT BOLT (37/64 I.D.) |
| 10 | 12-66966 | WASHER, RUBBER - UPPER MOUNT BOLT |
| 11 | 12-30514 | WASHER, UPPER MOUNT BOLT |
| 12 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, UPPER MOUNT BOLT |
| 13 | 87883 | COVER, UPPER MOUNT |
| 14 | 10-8M0214943 | SCREW, (.250-20 x 1.00), UPPER MOUNT COVER |
| 15 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, UPPER MOUNT COVER SCREW |
| 16 | 38157 | SEAL, TRIM COVER TO DRIVE SHAFT HOUSING |
| 17 | 38158 | STRIP, RETAINING - TRIM COVER SEAL (REAR) |
| 18 | 38154 | STRIP, RETAINING - TRIM COVER SEAL (SIDE) |
| 19 | 10-48408 | SCREW, (#10-16 x .500), RETAING STRIP |
| 20 | 695441 | TUBE, EXHAUST Comment: (LONG) |
| 21 | 32-45679 | TUBE, WATER INLET Comment: (LONG) |
| 22 | 11-64809 | NUT, POWERHEAD STUDS (5/16") |
| 23 | 75304T1 | MOUNT, RUBBER - LOWER |
| 24 | 10-75284 | SCREW, (.500-20 x 5.500), LOWER MOUNT SCREW |
| 25 | 12-28051 | WASHER, LOWER MOUNT SCREW |
| 26 | 12-28053 | WASHER, RUBBER - LOWER MOUNT SCREW |
| 27 | 12-61709 | WASHER, LOWER MOUNT SCREW |
| 28 | 11-25096 | NUT, LOWER MOUNT SCREW |
| 29 | 69592F1 | CLAMP, LOWER MOUNT |
| 30 | 10-29256 | SCREW, (.312-18 x .875), LOWER MOUNT CLAMP |
| 31 | 24-35522 | SPRING, TENSION - LOWER MOUNT CLAMP |
| 32 | 35474F2 | COVER, Lower Mount Clamp Comment: (MARINER) |
| 33 | 10-87884 | SCREW, (#12-14 x .920), COVER TO LOWER MOUNT CLAMP |
| 34 | 11-35521 | NUT, LOWER MOUNT CLAMP COVER |
| 35 | 88238A10 | CABLE ASSEMBLY, Ground |
| 36 | 23-23651 | SLEEVE, (1.625), WATER INLET TUBE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 865-8362A11 | CYLINDER BLOCK ASSEMBLY |
| 2 | 99523A1 | COVER ASSEMBLY, TRANSFER |
| 3 | 27-768621 | GASKET, TRANSFER COVER |
| 4 | 10-38837 | SCREW, (.312-18 x 1.12), TRANSFER COVER |
| 5 | 1025-8364A1 | COVER, CYLINDER BLOCK |
| 6 | 27-437792 | GASKET, CYLINDER BLOCK COVER |
| 7 | 10-76596 | SCREW, (.250-20 x 1.250), CYLINDER BLOCK COVER |
| 8 | 22-328022 | PLUG, Pipe (.125-27), CYLINDER BLOCK COVER |
| 9 | 27-695252 | GASKET, BAFFLE PLATE TO CYLINDER BLOCK |
| 10 | 27-703351 | GASKET, BAFFLE PLATE TO COVER |
| 11 | 69579 | PLATE, BAFFLE - EXHAUST MANIFOLD |
| 12 | 27-695242 | GASKET, PLATE TO EXHAUST MANIFOLD COVER |
| 13 | 78529 | COVER, EXHAUST MANIFOLD |
| 14 | 10-70602 | SCREW, (.250-20 x 2.00), PLATE/MANIFOLD COVER |
| 15 | 87-33386A3 | SWITCH ASSEMLBY |
| 16 | 10-32,11-45076 | NUT, Brass, MERCURY SWITCH TERMINAL |
| 17 | 10-37655 | SCREW, (#10-32 x .500), MERCURY SWITCH TO CRANKCASE |
| 18 | 17-36242 | PIN, Roll, MERCURY SWITCH |
| 19 | 32-892024122 | TUBING, (20.00 Feet Bulk), CRANKCASE BLEED |
| 20 | 21-428641 | FITTING, CRANKCASE BLEED |
| 21 | 22-59169003 | FITTING, CRANKCASE BLEED HOSE |
| 22 | 22-15133 | ELBOW, CRANKCASE (PRESS-IN) |
| 23 | 21-428651 | CONNECTOR, ATTENUATOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 11-52901 | NUT, (.625-18), FLYWHEEL |
| 2 | 12-33001 | WASHER, (.641 x 1.250 x .190), FLYWHEEL NUT |
| 3 | 19-45907 | PLUG, Yellow, FLYWHEEL PULLER THREADS |
| 4 | 248-8722A5 | FLYWHEEL ASSEMBLY |
| 5 | 10-68997 | SCREW, (.312-24 x .750), PLATE/HUB |
| 6 | 10-32417 | SCREW, (.250-28 x .625), FLEXIBLE PLATE TO FLYWHEEL |
| 7 | 889351 | PLATE, SWITCH BOX |
| 8 | 10-824941 | SCREW, (.312-18 x .750), SWITCH BOX PLATE |
| 9 | 332-7778A12 | SWITCHBOX ASSEMBLY |
| 10 | 10-12463 | SCREW, (.216-24 x .81), SWITCH BOX TO PLATE |
| 11 | 10-32,11-45076 | NUT, Brass, SWITCH BOX TERMINAL |
| 12 | 84-88807A9 | CABLE ASSEMBLY, SWITCH BOX TO COIL (BLACK) |
| 13 | 73439 | PLATE, MOUNTING - IGNITION COIL |
| 14 | 339-832757A4 | COIL ASSEMBLY, Ignition |
| 15 | 10-32,11-45076 | NUT, Brass, IGNITION COIL TERMINAL |
| 16 | 43542 | COVER, IGNITION COIL |
| 17 | 10-92399 | SCREW, (.190-32 x 2.250), COVER TO MOUNTING PLATE |
| 18 | 398-5704A7 | STATOR ASSEMBLY |
| 19 | 10-63136 | SCREW, (#10-24 x .880), STATOR TO UPPER END CAP |
| 20 | 96455A8 | PLATE ASSEMBLY, Trigger |
| 21 | 84-813715A1 | LEAD ASSEMBLY, SPARK PLUG |
| 22 | 85-63709A1 | BOOT/TERMINAL KIT |
| 23 | 99213 | SHEEL, SPARK PLUG BOOT |
| 24 | 33-14103550 | SPARK PLUG Comment: (CHAMPION#QL-76V)/CANADA AND BELGIUM |
| 25 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel, COIL COVER SCREW |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 76575A9 | PUMP ASSEMBLY, Fuel |
| 2 | 21-8M0084275 | CHECK VALVE ASSEMBLY |
| 3 | 55278A4 | DIAPHRAGM KIT |
| 4 | NSS | NOT SOLD SEPARATE, GASKET-CHECK VALVE TO HOUSING |
| 5 | NSS | NOT SOLD SEPARATE, GASKET-FUEL PUMP |
| 6 | 23004 | RETAINER, CHECK VALVE |
| 7 | 10-43725 | SCREW, (#6-32 x .380), RETAINER TO HOUSING |
| 8 | 86026 | RETAINER, SPRING |
| 9 | 24-86207 | SPRING, COMPRESSION |
| 10 | 86252 | CAP, SPRING END |
| 11 | 10-86885 | SCREW, PUMP MOUNTING (1-5/8") |
| 12 | 22-328022 | PLUG, Pipe (.125-27), FUEL PUMP |
| 13 | 32-774572 | HOSE, (48.00 Inches Bulk), FUEL PUMP TO EXHAUST PLATE (9-1/2") |
| 14 | 22-996642 | ELBOW, EXHAUST PLATE |
| 15 | 22-70007 | FITTING, 45 Degree, FUEL PUMP |
| 16 | 32-8M0108355 | LINE, (57.00 Inches Bulk), FUEL PUMP (3-1/2") |
| 17 | 88627 | BRACKET, FUEL FILTER |
| 18 | 10-60411 | SCREW, (1.25), BRACKET ATTACHING |
| 19 | 35-889527A07 | FILTER ASSEMBLY, Fuel |
| 20 | 35-87946Q04 | FILTER ASSEMBLY |
| 21 | 25-897536 | SEAL, FUEL FILTER |
| 22 | 12-69057 | WASHER, FUEL FILTER STUD |
| 23 | 11-400212 | NUT, (M6) Stainless Steel, FUEL FILTER STUD |
| 24 | 32-8M0108355 | LINE, (57.00 Inches Bulk), ADAPTOR TO FUEL PUMP (7-1/2") |
| 25 | 54-68424 | CLAMP, FUEL LINE ATTACHING |
| 26 | 22-63187 | FITTING, Barb (.250-18), FUEL LINE TO ADAPTOR |
| 27 | 22833 | ADAPTOR, CHECK UNIT (FUEL PUMP) |
| 28 | 23069 | STEM, CHECK UNIT ADAPTOR |
| 29 | 25-16524 | O-RING, ADAPTOR STEM |
| 30 | 24-23067T | SPRING, ADAPTRO STEM |
| 31 | 30188 | WASHER, ADAPTOR |
| 32 | 10-76596 | SCREW, (.250-20 x 1.250), ADAPTOR TO SOUND ATTENUTATOR |
| 33 | 32-8M0108355 | LINE, (57.00 Inches Bulk), TO LOWER CARBURETOR (15") |
| 34 | 22-64706001 | TEE, LOWER CARBURETOR |
| 35 | 32-8M0108355 | LINE, (57.00 Inches Bulk), CARBURETOR TO CARBURETOR (3") |
| 36 | 22-19688 | FITTING, UPPER CARBURETOR |
| 37 | 22-64705 | FITTING, FUEL PUMP (STRAIGHT) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 1643-9539T8 | GEAR HOUSING ASSEMBLY, Mariner (Basic) |
| 2 | 22-85822A10 | CONNECTOR ASSEMBLY, SPEEDOMETER |
| 3 | 17-8M0084726 | PIN, Dowel (.187 x .530), GEAR HOUSING |
| 4 | 16-33778 | STUD, WATER PUMP (2-5/8") |
| 5 | 16-8M0034453 | STUD, (.437-14/.437-20 x 2.190), GEAR HOUSING |
| 6 | 31-62091T | BEARING, Roller, DRIVE SHAFT |
| 7 | 72849A1 | SCREEN ASSEMBLY, WATER INTAKE - STARBOARD AND PORT |
| 8 | 10-36070 | SCREW, (#10-32 x 1.250), WATER INTAKE SCREEN |
| 9 | 10-32,11-859124 | NUT, Stainless Steel, WATER INTAKE SCREEN SCREW |
| 10 | 92815 | PLATE, SUPPORT - EXHAUST TUBE |
| 11 | 37721001 | SEAL, EXHAUST TUBE |
| 12 | 43-88019T | GEAR, Pinion |
| 13 | 11-55910 | NUT, (.437-20), PINION GEAR TO DRIVE SHAFT |
| 14 | 27-19552 | GASKET, WATER PUMP |
| 15 | 25-26722 | O-RING, WATER PUMP BASE |
| 16 | 46-77177A1 | BASE ASSEMBLY, Water Pump |
| 17 | 26-79831 | SEAL, Oil, WATER PUMP BASE |
| 18 | 26-90562 | SEAL, (1.254 x .312), WATER PUMP BASE |
| 19 | 17-35973 | PIN, Dowel, WATER PUMP BASE |
| 20 | 27-19553 | GASKET, LOWER - WATER PUMP |
| 21 | 32768 | FACE PLATE, WATER PUMP |
| 22 | 27-19551 | GASKET, UPPER - WATER PUMP |
| 23 | 47-89983T | IMPELLER, WATER PUMP |
| 24 | 28-8M0032837 | KEY, IMPELLER DRIVE |
| 25 | 46-77822A1 | BODY ASSEMBLY, Water Pump |
| 26 | 48753 | INSERT, WATER PUMP BODY |
| 27 | 26-38452 | SEAL, RUBBER - WATER PUMP |
| 28 | 12-38453 | WASHER, NYLON - WATER PUMP |
| 29 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel, WATER PUMP STUDS |
| 30 | 11-8267089 | NUT, (.250-28), WATER PUMP STUDS |
| 31 | 25-20273 | O-RING, RUBBER (DRIVE SHAFT) |
| 32 | 78654A1 | SEAT ASSEMBLY |
| 33 | 86304 | SEAL, SPLINED |
| 34 | 10-79953Q04 | SCREW, (.375-16 x .250), GREASE FILLER |
| 35 | 22-8M0058389 | SCREW, Magnetic, DRAIN |
| 36 | 12-191833 | WASHER, GREASE FILLER AND DRAIN SCREW |
| 37 | 88181 | SLEEVE, LUBRICATION |
| 38 | 15-92881A1 | SHIM SET, ROLLER BEARING (.002-3-5-10-20) |
| 39 | 31-8M0166756 | BEARING ASSEMBLY, Roller, TAPERED |
| 40 | 45-98180 | DRIVESHAFT ASSEMBLY Comment: (Long) |
| 41 | 24-20254 | SPRING, COMPRESSION - DRIVE SHAFT |
| 42 | 17-30545 | PIN, DRIVE SHAFT |
| 43 | 76063A1 | SHAFT ASSEMBLY, SHIFT - LOWER |
| 44 | 53-29641 | E RING, RETAINING - SHIFT SHAFT |
| 45 | 25-25439 | O-RING, (.862 x .103), SHIFT SHAFT BUSHING |
| 46 | 23-77631A2 | BUSHING ASSEMBLY, SHIFT SHAFT |
| 47 | 26-8M0204708 | SEAL, Oil, SHIFT SHAFT BUSHING |
| 48 | 12-77674 | WASHER, RUBBER - SHAFT BUSHING |
| 49 | 78036 | BASE, REVERSE LOCKING |
| 50 | 43308T1 | CAM, REVERSE LOCKING |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 1643-9539T8 | GEAR HOUSING ASSEMBLY, Mariner, Basic |
| 51 | 760394 | CAM, Shift Control |
| 52 | 15-38374A1 | SHIM SET, BEARING CUP (.002-3-5-10) |
| 53 | 31-38356A1 | BEARING SET |
| 54 | 43-88018T1 | GEAR ASSEMBLY, Forward |
| 55 | 31-21739 | BEARING, Roller, FORWARD GEAR |
| 56 | 38441 | FOLLOWER, Cam |
| 57 | 20843 | SLIDE, CROSS PIN |
| 58 | 24-39845 | SPRING, COMPRESSION - CAM FOLLOWER |
| 59 | 52-92911T | RATCHET, SLIDING CLUTCH |
| 60 | 17-8M0020942 | PIN, Cross, RATCHET TO PROPELLER SHAFT |
| 61 | 24-38114 | SPRING, RETAINING - CROSS PIN |
| 62 | 44-75365 | PROPELLER SHAFT |
| 63 | 43-88017T | GEAR, Reverse |
| 64 | 12-32004 | WASHER, REVERSE GEAR |
| 65 | 30-20839T | BEARING, Ball, REVERSE GEAR |
| 66 | 25-31986 | O-RING, BEARING CARRIER |
| 67 | 69386T1 | CARRIER ASSEMBLY, Bearing |
| 68 | 31-21700 | BEARING, Needle, BEARING CARRIER |
| 69 | 26-8M0205511 | SEAL, Oil, BEARING CARRIER |
| 70 | 26-8M0203757 | SEAL, Oil, BEARING CARRIER |
| 71 | 28-30281 | KEY, LOCATING, BEARING CARRIER |
| 72 | 14-53012 | TAB WASHER, GEAR HOUSING NUT |
| 73 | 11-87763 | NUT, GEAR HOUSING |
| 74 | 97-31640Q4 | TRIM TAB ASSEMBLY, GEAR HOUSING |
| 75 | 10-66024 | SCREW, (.437-14 x 1.75), TRIM TAB TO GEAR HOUSING |
| 76 | 12-8M0214963 | WASHER, (.406 x .750 x .104), DRIVE SHAFT HOUSING STUD |
| 77 | 11-8M0204726 | NUT, (.375-24), DRIVE SHAFT HOUSING STUD |
| 78 | 12-65791 | WASHER, DRIVE SHAFT HOUSING STUD (7/16") |
| 79 | 11-8M0204653 | NUT, (.437-20) Stainless Steel, DRIVE SHAFT HOUSING STUD |
| 80 | 73345A1 | THRUST HUB, FRONT |
| 81 | 14-8M0214942 | TAB WASHER, PROPELLER |
| 82 | 11-69578Q1 | PROP NUT KIT |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92975A32 | PUMP ASSEMBLY, Hydraulic |
| 1 | 25-48171 | O-RING, (.364. x .070), HYDRAULIC PUMP |
| 2 | 92975A32 | VALVE BODY AND GEAR ASSEMBLY |
| 3 | 10-69570 | SCREW, (#10-16 x .750), VALVE BODY TO RESERVOIR |
| 4 | 392-7727 | COUPLER AND SHAFT |
| 5 | 392-7735 | SEAL, RESERVOIR TO VALVE BODY AND GEAR |
| 6 | 392-7731 | RESEROVIR ASSEMBLY (PLASTIC) |
| 7 | 392-7732 | WASHER, THRUST - ARMATURE |
| 8 | 392-7729 | ARMATURE, FIELD AND FRAME |
| 9 | 392-8261 | FIELD AND FRAME ASSEMBLY |
| 10 | 392-7730 | BALL, COMMUTATOR END PLATE |
| 11 | 392-8262 | PLATE ASSEMBLY, COMMUTATOR END |
| 12 | 392-8989 | BRUSH SET, COMMUTATOR END PLATE |
| 13 | 392-2529 | SPRING SET, BRUSH TENSION |
| 14 | 392-7733 | BOLT SET, Thru- Plate and Frame to Reservoir |
| 15 | 392-7728 | FILL PLUG, RESERVOIR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 90-445643 | OWNERS GUIDE (MARINER 50/60) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 25-48171 | O-RING, (.364. x .070), MANIFOLD PLATE (SEE REF. #2) |
| 1 | 92975A32 | PUMP ASSEMBLY, Hydraulic (PLASTIC RESERVOIR) SEE NOTE |
| 2 | 25-48171 | O-RING, (.364. x .070), MANIFOLD PLATE |
| 3 | 10-79953Q04 | SCREW, (.375-16 x .250), FILLER - HYDRAULIC PUMP |
| 4 | 12-191833 | WASHER, SEALING - FILLER SCREW |
| 5 | 10-62269 | SCREW, (#10-32 x .437), VENT - HYDRAULIC PUMP |
| 6 | 45336 | PLATE, MANIFOLD |
| 7 | 45197A2 | VALVE ASSEMBLY, Control |
| 8 | 25-45254 | O-RING, CONTROL VALVE (3/4" O.D.) |
| 9 | 25-48171 | O-RING, (.364. x .070), CONTROL VALVE |
| 10 | 25-45253 | O-RING, CONTROL VALVE (5/8" O.D.) |
| 11 | 10-56500 | SCREW, (.250-28 x 1.250) |
| 12 | 22-46008 | PLUG, CONTROL VALVE (1/2-20") |
| 13 | 84-79147A3 | HARNESS ASSEMBLY |
| 14 | 88-8M0207796 | FUSE, 20 Ampere |
| 15 | 84-95084A3 | CABLE ASSEMBLY, FUSE |
| 16 | 45377T | BRACKET, MOUNTING |
| 17 | 10-35386 | SCREW, (.312-18 x 1.00) |
| 18 | 13-39107 | LOCKWASHER, (.312-24), MOUNTING BRACKET SCREW |
| 19 | 11-21908 | NUT, (.312-18) Cad Plated, MOUNTING BRACKET SCREW |
| 20 | 10-31830 | BOLT, (.375-24 x 1.75), HYDRAULIC PUMP TO BOAT |
| 21 | 11-46335 | NUT, HYDRAULIC PUMP BOLT |
| 22 | 94279 | BRACKET, MOUNTING - STARTER SOLENOID |
| 23 | 10-28638 | SCREW, MOUNTING BRACKET TO HYDRAULIC PUMP |
| 24 | 10-32,11-8M0204718 | NUT, |
| 25 | 8M0185622 | SOLENOID, Starter |
| 26 | 8,13-26995 | LOCKWASHER, Stainless Steel, SOLENOID TERMINAL |
| 27 | 8-32,11-26419 | NUT, Brass, SOLENOID TERMINAL |
| 28 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, SOLENOID TERMINAL |
| 29 | 11-94330 | NUT, (.250-20) Brass, SOLENOID TERMINAL |
| 30 | 85-861680 | BOOT, RUBBER - STARTER SOLENOID TERMINAL |
| 31 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel |
| 32 | 94275 | LINK, SOLENOID TO SOLENOID |
| 33 | 84-79138A1 | CABLE ASSEMBLY (NEGATIVE) |
| 34 | 88-8M0085705 | BREAKER, Circuit - 20 Ampere, EARLY MODELS |
| 35 | 10-8M0113176 | SCREW, (#10-24 x .375), CIRCUIT BREAKER-EARLY MODELS |
| 36 | 10-32,11-45076 | NUT, Brass |
| 37 | 84-87379A5 | WIRE |
| 38 | 88-79023T90 | FUSE ASSEMBLY, 90 Ampere |
| 39 | 12-96457 | WASHER, Phenolic (.27 x .81 x .062), FUSE TERMINAL |
| 40 | 11-21825 | NUT, (.250-28), FUSE TERMINAL |
| 41 | 84-61600A9 | WIRE, STARTER SOLENOID (BLACK) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92188A2 | REPAIR KIT (SEE NOTE) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 48-73144A45 | PROPELLER ASSEMBLY (ALUMINUM)(PITCH 17") Comment: 3 BLADES |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 814283A2 | BRACKET, ANCHOR - CONTROL CABLES |
| 2 | 60283A1 | LINK ASSEMBLY, SHIFT SHAFT |
| 3 | 24-20099 | SPRING, LINK TO ANCHOR BRACKET |
| 4 | 37896 | GUIDE BLOCK, LINK |
| 5 | 52100 | WEAR PLATE, NYLON - LINK |
| 6 | 8M0036768 | LATCH, LINK TO ANCHOR BRACKET |
| 7 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel, LINK LATCH |
| 8 | 11-36069 | NUT, LINK ATTACHING |
| 9 | 75355A32 | SHIFT SHAFT ASSEMBLY, UPPER Comment: (LONG) |
| 10 | 13-29720 | WAVE WASHER, SHIFT SHAFT TO LINK |
| 11 | 23-26856 | BUSHING, NYLON - SHIFT SHAFT TO LINK |
| 12 | 12-35462 | WASHER, (.2656 x .625 x .0625) Stainless Steel, LINK (SHIFT SHAFT END) |
| 13 | 39519 | CUP, RETAINER - ANCHOR BRACKET |
| 14 | 87609A1 | LEVER, NYLON - SHIFT CABLE LOCKING |
| 15 | 17-47175 | PIN, LOCKING LEVER AND COVER |
| 16 | 87609A1 | LINK, LOCKING LEVER TO COVER |
| 17 | 90211 | COVER, NYLON - SHIFT CABLE |
| 18 | 10-69101 | SCREW, ANCHOR BRACKET (7/8") |
| 19 | 27-884511 | GASKET, POWERHEAD |
| 20 | 42869A2 | PLATE ASSEMBLY, Exhaust |
| 21 | 23-27132 | BUSHING, NYLON - EXHAUST PLATE |
| 22 | 16-8M0034449 | STUD, (.312-18/.312-24 x 1.690), EXHAUST PLATE |
| 23 | 16-68166 | STUD, (.312 x 2.125), EXHAUST PLATE |
| 24 | 26-38452 | SEAL, WATER INLET TUBE |
| 25 | 12-38453 | WASHER, NYLON - WATER SEAL |
| 26 | 79799 | HOUSING, WATER SEAL |
| 27 | 27-797971 | GASKET, HOUSING |
| 28 | 10-79798 | SCREW, (#10-32 x 1.380), HOUSING TO EXHAUST PLATE |
| 29 | 60307 | SEAL, EXHAUST PLATE |
| 30 | 60306 | STRIP, RETAINING - EXHAUST PLATE SEAL |
| 31 | 10-62568 | SCREW, (#10-16 x .375), RETAINING STRIP |
| 32 | 10-28668 | SCREW, (.250-20 x .875) Stainless Steel, EXHAUST PLATE |
| 33 | 27-385011 | GASKET, ADAPTOR PLATE |
| 34 | 42718 | TUBE, Exhaust, ADAPTOR Comment: (60) |
| 35 | 27-602801 | GASKET, EXHAUST TUBE |
| 36 | 10-28636 | SCREW, (.250-20 x .750), EXHAUST TUBE |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 50-44369A1 | STARTER MOTOR ASSEMBLY Comment: (STAMPED 50-44369) |
| 1 | 90643 | DRIVE KIT Comment: (Use with Starter Motor Stamped 50-44369) |
| 2 | 685753 | DRIVE ASSEMBLY |
| 3 | 75660 | PLATE, DRIVE END |
| 4 | 10-95686 | BOLT, THRU Comment: (Use with Starter Motor Stamped 50-44369) |
| 6 | 11957 | ARMATURE Comment: (Use with Starter Motor Stamped 50-44369) |
| 7 | 898265016 | BRUSH/SPRING KIT |
| 8 | 23-57387 | BUSHING, INSULATING - INPUT STUD |
| 9 | 12-38013 | WASHER, INPUT STUD |
| 10 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, INPUT STUD |
| 11 | 11-20890 | NUT, (.250-20), INPUT STUD |
| 12 | 898265014 | HOLDER, BRUSH |
| 13 | 10-68586 | SCREW, BRUSH AND HOLDER TO CAP |
| 14 | 75383 | END CAP, COMMUTATOR |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 392-8848 | MOTOR DRIVE |
| 2 | 392-8852 | PLATE ASSEMBLY, DRIVE END |
| 3 | 392-8853 | BUSHING, DRIVE END PLATE |
| 4 | 392-8847 | ARMATURE |
| 5 | 392-8856 | PACKAGE, ARMATURE THRUST WASHER |
| 6 | 392-8849 | END CAP ASSEMBLY, COMMUTATOR |
| 7 | 392-8850 | PLATE/HOLDER ASSEMBLY, Brush |
| 8 | 392-8851 | BRUSH AND TERMINAL SET |
| 9 | 392-8854 | SPRING SET, BRUSH (2 SPRINGS PER SET) |
| 10 | 392-8855 | BOLT, THRU - END CAP TO END PLATE (1/4-28) |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 8M0058226 | RECTIFIER |
| 2 | 10-38055 | SCREW, (.190-32 x .62), RECTIFIER TO PLATE |
| 3 | 10,13-26996 | LOCKWASHER, Stainless Steel, RECTIFIER SCREW |
| 4 | 23-94304 | SPACER, RECTIFIER SCREW |
| 5 | 10-32,11-45076 | NUT, Brass, RECTIFIER TERMINAL |
| 6 | 89-8M0185149 | SOLENOID ASSEMBLY, Starter |
| 7 | 8,13-26995 | LOCKWASHER, Stainless Steel, SOLENOID TERMINAL |
| 8 | 8-32,11-26419 | NUT, Brass, SOLENOID TERMINAL |
| 9 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, SOLENOID TERMINAL |
| 10 | 11-94330 | NUT, (.250-20) Brass, SOLENOID TERMINAL |
| 11 | 85-97861 | INSULATOR, STARTER SOLENOID |
| 12 | 10-69054 | SCREW, (.250-20 x .620), SOLENOID TO ATTENUATOR |
| 13 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, SOLENOID SCREW |
| 14 | 50-44369A1 | STARTER MOTOR ASSEMBLY Comment: (STAMPED 50-44369) |
| 15 | 44368 | ADAPTOR Comment: STARTER MOTOR STAMPED 50-44369 |
| 16 | 8M0043376 | STOP, RUBBER - STARTER MOTOR |
| 17 | 84-93388A1 | CABLE ASSEMBLY, (6.00 Inches) Black, STARTER TO SOUND ATTENUATOR |
| 18 | 10-69035 | SCREW AND LOCKWASHER, (.250-20 x .625) Stainless Steel, CABLE TO STARTER MOTOR |
| 19 | 84-93389A6 | CABLE ASSEMBLY (9-1/2 Inches)(Solenoid to Starter Motor |
| 20 | 13-26992 | LOCKWASHER, (.250) Stainless Steel, STARTER MOTOR TERMINAL |
| 21 | 11-20890 | NUT, (.250-20), STARTER MOTOR TERMINAL |
| 22 | 23-8M0034918 | COLLAR, RUBBER - STARTER MOUNT |
| 23 | 23-56774 | SPACER, COLLAR TO MOUNTING BRACKETS |
| 24 | 84-96271A2 | HARNESS ASSEMBLY (INTERNAL) |
| 25 | 84-95084A2 | CABLE ASSEMBLY, FUSE |
| 26 | 88-8M0207796 | FUSE, 20 Ampere |
| 27 | 88751 | CLAMP, WIRING HARNESS |
| 28 | 10-23702 | SCREW, (.190-32 x 1.12), WIRING HARNESS CLAMP |
| 29 | 12-72761 | WASHER, (.203 x .562 x .060) Stainless Steel, WIRING HARNESS CLAMP SCREW |
| 30 | 24-28357 | SPRING, WIRING HARNESS |
| 31 | 84-88439A4 | CABLE ASSEMBLY, Battery - Negative |
| 32 | 88683 | BRACKET, WIRING HARNESS SUPPORT |
| 33 | 10-23015 | SCREW, (.190-32 x 1.00), BRACKET ATTACHING |
| 34 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel, BRACKET SCREW |
| 35 | 88682 | COVER, HARNESS SUPPORT BRACKET |
| 36 | 10-25158 | SCREW, (.190-32 x 1.75), COVER TO BRACKET |
| 37 | 26-60925 | SEAL, WIRING HARNESS BRACKET |
| 38 | 54-28700 | CLAMP, WIRING HARNESS |
| 39 | 10-73286 | SCREW, (.250-20 x .500) Stainless Steel, WIRING HARNESS CLAMP |
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-88449A32 | GASKET SET |
| 1 | 1490-8599A6 | SWIVEL BRACKET Comment: (LONG) |
| 2 | 26-32911 | SEAL, Oil, SWIVEL BRACKET |
| 3 | 22-8M0169589 | FITTING, Grease |
| 4 | 26-22734 | SEAL, Oil, SWIVEL BRACKET |
| 5 | 69540A4 | SWIVEL PIN ASSEMBLY Comment: (LONG) |
| 6 | 30711 | BUMPER, STEERING ARM |
| 7 | 10-66897 | BOLT, (.437-20 x 5.250), UPPER MOUNT TO SWIVEL PIN |
| 8 | 12-25176 | WASHER, SWIVEL PIN TO BOTTOM YOKE (.060) |
| 9 | 77416T1 | YOKE, Bottom |
| 10 | 53-77415 | RETAINING RING, BOTTOM YOKE |
| 11/12 | 89105 | TILT LOCK, STARBOARD/PORT |
| 13 | 25-627021 | O-RING, (.301 x .070), TILT LOCK |
| 14 | 79659 | COUPLING, TILT LOCK |
| 15 | 18-47959 | COTTER PIN, TILT LOCK TUBE |
| 16 | 56349 | SHAFT, REVERSE LOCK PIVOT |
| 17 | 23-69132 | BUSHING, REVERSE PIVOT SHAFT |
| 18 | 18-45882 | COTTER PIN, REVERSE LOCK TO SHAFT |
| 19 | 24-78203A2 | SPRING, REVERSE LOCK TENSION |
| 20 | 14664A3 | LOCK ASSEMBLY, Reverse |
| 21 | 43416 | PUSH ROD, REVERSE LOCK Comment: (LONG) |
| 22 | 12-8M0042642 | WASHER, (.323 x .563 x .063) Stainless Steel, PUSH ROD |
| 23 | 24-44297 | SPRING, PUSH ROD |
| 24 | 89813 | ROD END, PUSH ROD |
| 25 | 11-82670911 | NUT, (.312-24) Stainless Steel, PUSH ROD |
| 26 | 933361 | GUIDE, PUSH ROD |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 92194A20 | TRIM CYLINDER Comment: (MARINER) |
| 2 | 22-8M0169589 | FITTING, Grease, TRIM CYLINDER |
| 3 | 10-45265 | SCREW, (#10-32 x .3125), BLEED |
| 4 | 25-45016 | O-RING, BLEED SCREW |
| 5 | 10-92050 | SCREW, (.500-20 x 1.500) Comment: WITHOUT TAPPED HOLE |
| 6 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel, TRIM CYLINDER BOLT |
| 7 | 23-45280 | SPACER, TRIM CYLINDER - LOWER |
| 8 | 23-94907A1 | BUSHING, RUBBER - TRIM CYLINDER |
| 9 | 89108A3 | BRACKET, TRIM CYLINDER (PORT) |
| 10 | 26-70608 | SEAL, Oil, PORT BRACKET |
| 11 | 89290 | PLUNGER, LIMIT SWITCH ACTUATING |
| 12 | 24-95881 | SPRING, TENSION - LIMIT SWITCH PLUNGER |
| 13 | 16-45282 | STUD, (.312-24 x 16.620), MOUNTING BRACKET |
| 14 | 13-8M0204647 | LOCKWASHER, (.312), MOUNTING BRACKET STUD |
| 15 | 11-28770 | NUT, (.312-24) Stainless Steel, MOUNTING BRACKET STUD |
| 16 | 10-45263 | SCREW, (.500-20 x .2.250), MOUNTING BRACKET |
| 17 | 10-89673 | SCREW, (.375-16 x 5.00) |
| 18 | 12-68410 | WASHER, MOUNTING BRACKET BOLT |
| 19 | 11-82671112 | NUT, MOUNTING BRACKET BOLT |
| 20 | 89111T | BRACKET, TRIM CYLINDER (STARBOARD) |
| 21 | 10-45328 | SCREW, (.437-20 x 3.560) |
| 22 | 12-37807 | WASHER Comment: (Starboard Only) |
| 23 | 11-8M0143423 | NUT, (.437-20), TRIM CYLINDER SCREW |
| 24 | 24-24390 | SPRING, TENSION - ADJUSTING STUD |
| 25 | 16-8M0034461 | STUD, (#10-32 x .930), ADJUSTING - CUT-OUT LIMIT SWITCH |
| 26 | 10-32,11-859124 | NUT, Stainless Steel, JAM - LIMIT SWITCH ADJUSTING STUD |
| 27 | 99897 | CAM, LIMIT SWITCH ADJUSTING STUD |
| 28 | 86967 | PLATE, RETAINING - LIMIT SWITCH CAM |
| 29 | 10-68513 | SCREW, (#10-32 x .375) Stainless Steel, RETAINING PLATE AND CAM |
| 30 | 10,13-26996 | LOCKWASHER, Stainless Steel, RETAINING PLATE AND CAM SCREW |
| 31 | 45326A2 | SWITCH ASSEMBLY, CUT-OUT LIMIT |
| 32 | 23-45354 | BUSHING, RUBBER - CUT-OUT LIMIT SWITCH |
| 33 | 10-47255 | SCREW, (#4-40 x .625), CUT-OUT LIMIT SWITCH |
| 34 | 89272 | COVER, LIMIT SWITCH |
| 35 | 27-892731 | GASKET, LIMIT SWITCH COVER |
| 36 | 10-34994 | SCREW, (#10-32 x 1.00) Stainless Steel, LIMIT SWITCH COVER |
| 37 | 12-38833 | WASHER, LIMIT SWITCH COVER SCREW |
| 38 | 87774A1 | COVER, INLET - TRANSOM |
| 39 | 27-87775 | GASKET, INLET COVER |
| 40 | 25-45507 | GROMMET, RUBBER - INLET COVER |
| 41 | 10-36070 | SCREW, (#10-32 x 1.250), INLET COVER TO BOAT |
| 42 | 10,13-26996 | LOCKWASHER, Stainless Steel, INLET COVER SCREW |
| 43 | 10-32,11-68219 | NUT, Stainless Steel, INLET COVER SCREW |
| 44 | 32-88005 | HOSE, TRIM |
| 45 | 32-88006 | HOSE, LIFT |
| 46 | 25-12602002 | GROMMET, RUBBER Comment: (7/16" I.D. - 7/8" LONG) |
| 47 | 73519A1 | STRAP, Tilt Stop |
| 48 | 69259 | TUBE, MOUNTING - TILT STOP |
| 49 | 77669 | PIN, MOUNTING TUBE |
| 50 | 63473 | TUBE, CUSHION |
| 51 | 18-36002 | COTTER PIN, MOUNTING TUBE PIN |
| 52 | 18-45882 | COTTER PIN, TILT PIN RETAINING |
| 53 | 12-39304 | WASHER, TILT PIN |
| 54 | 23-89112 | BUSHING, MOUNTING BRACKET |
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 76864 | HOUSING, NYLON-THROTTLE ACTUATOR |
| 2 | 77025 | CAM, NYLON-THROTTLE ACTUATOR |
| 3 | 10-37571 | SCREW, (.190-32 x .500), HOUSING |
| 4 | 10,13-26996 | LOCKWASHER, Stainless Steel, HOUSING SREW |
| 5 | 60570 | PLATE, RETAINER-ACTUATOR HOUSING |
| 6 | 23-74213 | BARREL, NYLON-THROTTLE LINK ROD |
| 7 | 74164 | ROD, LINK-THROTTLE |
| 8 | 77013A1 | SWIVEL, LINK TO THROTTLE CONTROL LEVER |
| 9 | 13-29402 | WAVE WASHER, LINK ROD SWIVEL |
| 10 | 23-26856 | BUSHING, LINK ROD SWIVEL |
| 11 | 12-73288 | WASHER, LINK ROD SWIVEL |
| 12 | 11-45774 | NUT, LINK ROD SWIVEL |
| 13 | 77032A2 | LEVER ASSEMBLY, THROTTLE CONTROL |
| 14 | 10-67916 | SCREW, THROTTLE LEVER ADJUSTING (2") |
| 15 | 11-29598 | NUT, (.250-28) Stainless Steel, JAM-ADJUSTING SCREW |
| 16 | 52023 | CAP, ADJUSTINTG SCREW |
| 17 | 10-818165 | SCREW, (.375-16 x 1.75), THROTTLE CONTROL LEVER |
| 18 | 23-55164 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 19 | 23-55171 | BUSHING, THROTTLE CONTROL LEVER SCREW |
| 20 | 24-55162 | SPRING |
| 21 | 77031A2 | LEVER ASSEMBLY, SPARK ADVANCE |
| 22 | 12-68410 | WASHER, THROTTLE CONTROL LEVER SCREW |
| 23 | 10-32627 | SCREW, (.190-32 x 1.50), SPARK ADVANCE ADJUSTING |
| 24 | 10-32,11-68219 | NUT, Stainless Steel, ADJUSTING SCREW |
| 25 | 48039 | CAP, ADJUSTING SCREW |
| 26 | 10-77650 | SCREW, SPARK ADVANCE LEVER ADJUSTING |
| 27 | 11-29598 | NUT, (.250-28) Stainless Steel, JAM-ADUSTING SCREW |
| 28 | 52023 | CAP, ADJUSTING SCREW |
| 29 | 39483 | LATCH, THROTTLE CONTROL LEVER |
| 30 | 10-69026 | SCREW, (.250-28 x .880), LATCH TO THROTTLE CONTROL LEVER |
| 31 | 24-20099 | SPRING, COMPRESSION-LATCH SCREW |
| 32 | 11-826709109 | NUT, (.250-28), LATCH ATTACHING SCREW |
| 33 | 74897T | PIVOT, LINK ROD TO STATOR |
| 34 | 74212 | ROD, LINK-SPARK ADVANCE |
| 35 | 77013A1 | SWIVEL, LINK ROD TO SPARK ADVANCE LEVER |
Regular maintenance keeps your Mercury 60 (3 CYL.) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
Thanks for subscribing!
This email has been registered!
