Images
Product
Price
Qty
Options
- $52.00
- $52.00
- Unit price
- per
$52.00
Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
Mercury 225 SEAPRO (3.0L CARB) (0G245605 THRU 0G760299) Parts & Diagrams
🔎 Mercury 225 SEAPRO (3.0L CARB) Reference Library — Exploded parts diagrams (50 diagrams), specifications, common issues, and maintenance checklist.
The Mercury 225 SEAPRO (3.0L CARB) is a 4-Stroke, V6 64-degree, DOHC, 24-valve outboard motor. Designed for large center-consoles, offshore sport-fishing boats, and multi-engine configurations.
Quick Reference Specifications
| Specification | Value |
|---|---|
| Engine Type | 4-Stroke, V6 64-degree, DOHC, 24-valve |
| Horsepower | 225 HP |
| Displacement | 3400 cc (3.4L / 209 CID) |
| Bore x Stroke | 92 mm x 86 mm (3.6 in. x 3.4 in.) |
| Spark Plug (Type & Gap) | NGK LKAR7C-9 |
| Engine Oil Capacity | 6.6 L (7.0 qt) |
| Recommended Engine Oil | Mercury FourStroke Oil 25W-40 |
| Gear Case Oil Capacity | 710 mL (24.0 oz) |
| Idle Speed (in gear) | 600 ± 50 RPM (in gear) |
| Full Throttle RPM Range | 5200-6000 |
| Fuel | Unleaded Gasoline, 87 Octane min. |
Always verify specifications against your owner's manual for your specific serial number range.
Common Issues & Recommended Parts
Below are common maintenance scenarios for the Mercury 225 SEAPRO (3.0L CARB):
- Water Pump / Overheating: If the tell-tale stream is weak or absent, the water pump impeller likely needs replacement. Inspect annually or every 100 hours. → Recommended: Water Pump Impeller Kit
- Engine Oil / Maintenance Light: 4-stroke engines require regular oil and filter changes. Use marine-grade oil rated for your engine. Change every 100 hours or annually. → Recommended: Oil Filter, Engine Oil
- Fuel Injector Issues (EFI models): Rough idle or misfires may indicate clogged fuel injectors. Use fuel stabilizer and clean injectors periodically. → Recommended: Fuel Injector, Fuel Filter
- Gear Case Oil Leak: Check lower unit seals if gear oil appears milky (water contamination). Replace seals and gaskets during lower unit service. → Recommended: Lower Unit Seal Kit, Drain Plug Gaskets
- Anode Corrosion: Inspect sacrificial anodes regularly, especially in saltwater. Replace when 50% depleted to protect against galvanic corrosion. → Recommended: Zinc/Aluminum Anode Kit
Parts Diagrams & OEM Part Numbers
Expand the sections below to view detailed exploded parts diagrams and find the exact OEM replacement components for your Mercury 225 SEAPRO (3.0L CARB).
▶ACCESSORIES (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 0 | 17334A2 | VISUAL WARNING SYSTEM (LOW OIL/OVERHEAT) |
▶ANCHOR BRACKET(ALL MODELS) (S/N-0G303046 & UP) (33 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 87-8M0052931 | SWITCH Comment: NON SEAPRO/MARATHON |
| 2 | 10-82470620 | SCREW, (M3.5 x 20) Comment: NON SEAPRO/MARATHON |
| 3 | 824010T05 | BRACKET |
| 4 | 10-42975 | DRIVE SCREW |
| 5 | 824016 | LATCH |
| 6 | 824015 | CUP, Barrel Retainer |
| 7 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 8 | 23-824013 | BUSHING |
| 9 | 23-812707 | BUSHING |
| 10 | 24-824014 | SPRING |
| 11 | 8240111 | GUIDE, Roller |
| 12 | 825204A2 | LINK KIT, Throttle |
| 13 | NSS | NOT SOLD SEPARATE, Throttle Lever |
| 14 | NSS | NOT SOLD SEPARATE, Throttle Lever |
| 15 | 10-15124 | SCREW, (#10-32 x .750) |
| 16 | 12-89302 | WASHER, (.203 x .406 x .040) |
| 17 | 10,13-69432 | LOCKWASHER, External |
| 18 | 828500 | LINK, Throttle |
| 19 | 23-8M0215006 | BUSHING |
| 20 | 42927 | INSERT |
| 21 | 12-35459 | WASHER |
| 22 | 11-401386 | NUT, (M6) |
| 23 | 10-40124 | SCREW, (M6 x 55) |
| 24 | 11-400212 | NUT, (M6) Stainless Steel |
| 25 | 42942 | CAP |
| 26 | 8M0040987 | LEVER, Throttle Control |
| 27 | 23-821113 | BUSHING |
| 28 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 29 | 11-401388 | NUT, (M8) |
| 30 | 826205 | BRACKET, Oil Link |
| 31 | 10-81893435 | SCREW, (M8 x 35) |
| 32 | 12-36042 | WASHER |
| 33 | 878190 | LINK |
▶ANCHOR BRACKET(NON SEAPRO/MARATHON) (S/N-0G303045 & BELOW) (37 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 87-8M0052931 | SWITCH |
| 2 | 10-82470620 | SCREW, (M3.5 x 20) |
| 3 | 824010T05 | BRACKET |
| 4 | 10-42975 | DRIVE SCREW |
| 5 | 824016 | LATCH |
| 6 | 824015 | CUP, Barrel Retainer |
| 7 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 8 | 23-824013 | BUSHING |
| 9 | 23-812707 | BUSHING |
| 10 | 24-824014 | SPRING |
| 11 | 8240111 | GUIDE, Roller |
| 12 | 825204A1 | LINK, Throttle Comment: USE WITH WMH-19 SERIES CARBURETORS |
| 13 | 18181 | LINK (STUB SHAFT) Comment: USE WITH WMH-19 SERIES CARBURETORS |
| 14 | 825204A1 | LINK KIT, Throttle Comment: USE WITH WMH-46/47 SERIES CARBURETORS |
| 15 | 18181 | LINK (STUB SHAFT) Comment: USE WITH WMH-46/47 SERIES CARBURETORS |
| 16 | 181811 | LINK (BALL SHAFT) Comment: USE WITH WMH-46/47 SERIES CARBURETORS |
| 17 | 18178 | ROLLER |
| 18 | 10-87926 | SCREW, (#10-32 x .500) |
| 19 | 12-89302 | WASHER, (.203 x .406 x .040) |
| 20 | 10,13-69432 | LOCKWASHER, External |
| 21 | 1938523 | LINK |
| 22 | 23-8M0215006 | BUSHING |
| 23 | 16-429841 | STUD |
| 24 | 8183942 | CAM, Throttle |
| 25 | 12-69056 | WASHER, (.255 x .620 x .030) Stainless Steel |
| 26 | 11-401386 | NUT, (M6) |
| 27 | 818395 | LINK, Throttle |
| 28 | 23-821113 | BUSHING |
| 29 | 10-40124 | SCREW, (M6 x 55) |
| 30 | 11-400212 | NUT, (M6) Stainless Steel |
| 31 | 42942 | CAP |
| 32 | 8M0040987 | LEVER, Throttle Control |
| 33 | 12-36042 | WASHER |
| 34 | 10-81893435 | SCREW, (M8 x 35) |
| 35 | 42927 | INSERT |
| 36 | 12-35459 | WASHER |
| 37 | 11-401386 | NUT, (M6) |
▶ANCHOR BRACKET(SEAPRO/MARATHON) (S/N-0G303045 & BELOW) (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 824010T05 | BRACKET |
| 2 | 8240111 | GUIDE, Roller |
| 3 | 24-824014 | SPRING |
| 4 | 23-812707 | BUSHING |
| 5 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 6 | 23-824013 | BUSHING |
| 7 | 10-42975 | DRIVE SCREW |
| 8 | 824016 | LATCH |
| 9 | 824015 | CUP, Barrel Retainer |
| 10 | 16-429841 | STUD |
| 11 | 8183942 | CAM, Throttle |
| 12 | 12-69056 | WASHER, (.255 x .620 x .030) Stainless Steel |
| 13 | 11-401386 | NUT, (M6) |
| 14 | 23-8M0215006 | BUSHING |
| 15 | 818395 | LINK, Throttle |
| 16 | 23-821113 | BUSHING |
| 17 | 10-40124 | SCREW, (M6 x 55) |
| 18 | 11-400212 | NUT, (M6) Stainless Steel |
| 19 | 42942 | CAP |
| 20 | 8M0040987 | LEVER, Throttle Control |
| 21 | 12-36042 | WASHER |
| 22 | 10-81893435 | SCREW, (M8 x 35) |
| 23 | 42927 | INSERT |
| 24 | 11-401386 | NUT, (M6) |
| 25 | 12-35459 | WASHER |
| 26 | 825204A1 | LINK KIT, Throttle |
| 27 | 18181 | LINK (STUB SHAFT) |
| 28 | 181811 | LINK (BALL SHAFT) |
| 29 | 18178 | ROLLER |
| 30 | 10-87926 | SCREW, (#10-32 x .500) |
| 31 | 12-89302 | WASHER, (.203 x .406 x .040) |
| 32 | 10,13-69432 | LOCKWASHER, External |
▶BLEED SYSTEM(PORT) (S/N-0G437999 & BELOW) (11 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk) (6 IN.) |
| 2 | 32-892024122 | TUBING, (20.00 Feet Bulk) (8-1/2 IN.) |
| 3 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3 IN.) |
| 4 | 32-892024122 | TUBING, (20.00 Feet Bulk) (4-1/2 IN.) |
| 5 | 21-149125 | CHECK VALVE |
| 6 | 22-8243561 | FITTING (REF. #34 ON "CYLINDER BLOCK AND END CAP") |
| 7 | 22-8245021 | CONNECTOR (REF. #8 ON "CYLINDER BLOCK AND END CAP") |
| 8 | 22-768431 | FITTING (REF. #11 ON "CYLINDER BLOCK AND END CAP") |
| 9 | 821556 | RETAINER, Check Valve (REF. #32 ON "CYLINDER BLOCK AND END CAP") |
| 10 | 22-8272011 | PIPE PLUG |
▶BLEED SYSTEM(PORT)(S/N-0G438000 TO 0G485988) (10 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 21-149125 | CHECK VALVE |
| 2 | 22-768431 | FITTING Comment: (REF. #11 ON "CYLINDER BLOCK AND END CAP") |
| 3 | 22-8243561 | FITTING Comment: (REF. #34 ON "CYLINDER BLOCK AND END CAP") |
| 4 | 22-59169003 | FITTING (PLASTIC) |
| 5 | 22-8245021 | CONNECTOR Comment: (REF. #8 ON "CYLINDER BLOCK AND END CAP") |
| 6 | 32-892024122 | TUBING, (20.00 Feet Bulk) (1-1/2 IN.) |
| 7 | 32-892024122 | TUBING, (20.00 Feet Bulk) (9-1/2 IN.) |
| 8 | 32-892024122 | TUBING, (20.00 Feet Bulk) (6 IN.) |
| 9 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3 IN.) |
▶BLEED SYSTEM(PORT)(S/N-0G485989 & UP) (11 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk) (6 IN.) |
| 2 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3 IN.) |
| 3 | 32-892024122 | TUBING, (20.00 Feet Bulk) (13-1/4 IN.) |
| 4 | 21-149126 | CHECK VALVE |
| 5 | 21-8282182 | CHECK VALVE Comment: (REF. #13 ON "CYLINDER BLOCK AND END CAP") |
| 6 | 22-8243561 | FITTING Comment: (REF. #34 ON "CYLINDER BLOCK AND END CAP") |
| 7 | 22-8245021 | CONNECTOR Comment: (REF. #8 ON "CYLINDER BLOCK AND END CAP") |
| 8 | 21-8348041 | CHECK VALVE Comment: (REF. #12 ON "CYLINDER BLOCK AND END CAP") |
| 9 | 54-22875 | CLIP |
| 10 | 10-48408 | SCREW, (#10-16 x .500) |
▶BLEED SYSTEM(STARBOARD) (S/N-0G437999 & BELOW) (15 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk) (6 IN.) |
| 2 | 32-892024122 | TUBING, (20.00 Feet Bulk) (8-1/2 IN.) |
| 3 | 32-892024122 | TUBING, (20.00 Feet Bulk) (4 IN.)(REF. #31 ON "CYLINDER BLOCK AND END CAP") |
| 4 | 32-892024122 | TUBING, (20.00 Feet Bulk) (22-1/2 IN.)(REF. #28 ON "CYLINDER BLOCK AND END CAP") |
| 5 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3 IN.) |
| 6 | 32-892024122 | TUBING, (20.00 Feet Bulk) (4-1/2 IN.) |
| 7 | 21-149125 | CHECK VALVE |
| 8 | 22-8243561 | FITTING (REF. #34 ON "CYLINDER BLOCK AND END CAP") |
| 9 | 22-8245021 | CONNECTOR (REF. #8 ON "CYLINDER BLOCK AND END CAP") |
| 10 | 22-768431 | FITTING (REF. #11 ON "CYLINDER BLOCK AND END CAP") |
| 11 | 21-426585 | CHECK VALVE (REF. #14 ON "CYLINDER BLOCK AND END CAP") |
| 12 | 21-8159234 | CHECK VALVE (REF. #16 ON "CYLINDER BLOCK AND END CAP") |
| 13 | 821556 | RETAINER, Check Valve (REF. #32 ON "CYLINDER BLOCK AND END CAP") |
| 14 | 22-8272011 | PIPE PLUG |
▶BLEED SYSTEM(STARBOARD)(S/N-0G438000 TO 0G485988) (15 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 21-149125 | CHECK VALVE |
| 2 | 22-768431 | FITTING Comment: (REF. #11 ON "CYLINDER BLOCK AND END CAP") |
| 3 | 22-8243561 | FITTING Comment: (REF. #34 ON "CYLINDER BLOCK AND END CAP") |
| 4 | 22-59169003 | FITTING (PLASTIC) |
| 5 | 22-8245021 | CONNECTOR Comment: (REF. #8 ON "CYLINDER BLOCK AND END CAP") |
| 6 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3 IN.) |
| 7 | 32-892024122 | TUBING, (20.00 Feet Bulk) (11-3/4 IN.) |
| 8 | 32-892024122 | TUBING, (20.00 Feet Bulk) (6 IN.) |
| 9 | 32-892024122 | TUBING, (20.00 Feet Bulk) (1-1/2 IN.) |
| 10 | 32-892024122 | TUBING, (20.00 Feet Bulk) (9-1/2 IN.) |
| 11 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3-3/4 IN.) Comment: (REF. #31 ON "CYLINDER BLOCK AND END CAP") |
| 12 | 32-892024122 | TUBING, (20.00 Feet Bulk) (22-1/2 IN.) Comment: (REF. #28 ON "CYLINDER BLOCK AND END CAP") |
| 13 | 21-8159234 | CHECK VALVE Comment: (REF. #16 ON "CYLINDER BLOCK AND END CAP") |
| 14 | 21-426585 | CHECK VALVE Comment: (REF. #14 ON "CYLINDER BLOCK AND END CAP") |
▶BLEED SYSTEM(STARBOARD)(S/N-0G485989 & UP) (15 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 32-892024122 | TUBING, (20.00 Feet Bulk) (9-1/2 IN.) |
| 2 | 32-892024122 | TUBING, (20.00 Feet Bulk) (6 IN.) |
| 3 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3 IN.) |
| 4 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3-3/4 IN.) Comment: (REF. #31 ON "CYLINDER BLOCK AND END CAP") |
| 5 | 32-892024122 | TUBING, (20.00 Feet Bulk) (22-1/2 IN.) Comment: (REF. #28 ON "CYLINDER BLOCK AND END CAP") |
| 6 | 32-892024122 | TUBING, (20.00 Feet Bulk) (13-1/4 IN.) |
| 7 | 32-892024122 | TUBING, (20.00 Feet Bulk) (16 IN.) |
| 8 | 21-149126 | CHECK VALVE |
| 9 | 22-8243561 | FITTING Comment: (REF. #34 ON "CYLINDER BLOCK AND END CAP") |
| 10 | 22-8245021 | CONNECTOR Comment: (REF. #8 ON "CYLINDER BLOCK AND END CAP") |
| 11 | 21-8282182 | CHECK VALVE Comment: (REF. #13 ON "CYLINDER BLOCK AND END CAP") |
| 12 | 21-8348041 | CHECK VALVE Comment: (REF. #12 ON "CYLINDER BLOCK AND END CAP") |
| 13 | 21-426585 | CHECK VALVE Comment: (REF. # 14 ON "CYLINDER BLOCK AND END CAP") |
| 14 | 21-8159234 | CHECK VALVE Comment: (REF. #16 ON "CYLINDER BLOCK AND END CAP") |
▶BOTTOM COWL (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 4009-818448A4 | BOTTOM COWL Comment: (WHITE-PORT) |
| 2 | 4009-818447A4 | BOTTOM COWL Comment: (WHITE-STBD.) |
| 3 | 8M0109217 | SEAL, Cowl (41.00 Inches) |
| 4 | 10-82130040 | SCREW, (M6 x 40) |
| 5 | 10-824868 | SCREW, (M6 x 75) |
| 6 | 889740A02 | FRONT HANDLE Comment: (WHITE) |
| 7 | 23-335891 | BUSHING |
| 8 | 25-48462 | O-RING, (.614 x .070) |
| 9 | 8219423 | PAWL |
| 10 | 12-69057 | WASHER, (.281 x .734 x .063) |
| 11 | 11-401196 | NUT, (M6) |
| 12 | 10-8214281 | SCREW, (#10-16 x .625) |
| 13 | 54-822873 | CLIP |
| 14 | 812830T01 | PLUG Comment: (SEAPRO/MARATHON) |
| 15 | 87-8M0042301 | SWITCH |
| 16 | 8M0032848 | RETAINER |
| 17 | 54-822024 | CLAMP |
| 18 | 54-822023 | CLAMP |
| 19 | 10-92799 | SCREW, (#10-16 x 1.12) |
▶CARBURETOR(S/N-0G303045 & BELOW) (28 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-814195A93 | GASKET SET |
| 1 | 3311-818639A14 | CARBURETOR, Bottom Comment: WMH-47 |
| 2 | 810779 | CAP |
| 3 | NSS | NOT SOLD SEPARATE, Idle Needle/Spring |
| 4 | 27-677511 | GASKET |
| 5 | 815633050 | JET, (.050), Progression Air Comment: (WMH-47) |
| 6 | 1395-6030 | JET, (.070), Bowl Vent |
| 7 | 1395-6246 | JET, (.048), Idle Air Bleed |
| 8 | 1395-811694 | PLUG |
| 9 | NSS | NOT SOLD SEPARATE, Gasket-Plug |
| 10 | NSS | NOT SOLD SEPARATE, Spring-Throttle Return |
| 11 | 8107221 | LEVER, Throttle Comment: (CENTER - WMH-46/47) |
| 12 | 1395-811284 | SPACER |
| 13 | 12-810745 | WASHER |
| 14 | 11-810744 | NUT |
| 15 | NSS | NOT SOLD SEPARATE, Gasket-Fuel bowl |
| 16 | 810738 | FLOAT ASSEMBLY |
| 17 | NSS | NOT SOLD SEPARATE, Screw-Float Pin |
| 18 | F10064 | SHAFT |
| 19 | 1395-8116901 | VALVE SEAT KIT |
| 20 | NSS | NOT SOLD SEPARATE, Gasket-Valve Seat |
| 21 | 1395-823624 | BOWL, Fuel (CENTER/BOTTOM) |
| 22 | 1399-3796 | JET, (.076), PORT. - CENTER/BOTTOM) Comment: WMH-47 |
| 23 | 1395-808612 | SCREW AND WASHER, (#8-32 x .750) Comment: WMH-46/47 |
| 24 | 1395-823630 | JET, Progression Fuel Comment: WMH-47 |
| 25 | 1395-7900 | TEE FITTING (TOP/CENTER) |
| 26 | 1395-7901 | ELBOW (BOTTOM) |
| 27 | 825276 | FILLER BLOCK |
▶CARBURETOR(S/N-0G303046 & UP) (27 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-814195A93 | GASKET SET |
| 1 | 3326-828272T57 | CARBURETOR, Bottom Comment: WMV-13A |
| 2 | 1395-809743 | COVER |
| 3 | 1395-809758 | GASKET |
| 4 | 1395-8087391 | SCREW |
| 5 | 27-828292 | GASKET |
| 6 | 815633058 | JET, Idle Air Vent (.058-BOTTOM) Comment: RIGHT BORE-WMV-13 |
| 7 | 1395-5815 | JET, (.086) (CENTER) Comment: (WMV-13) |
| 8 | 815633052 | JET, (.052) (CENTER/BOTTOM) Comment: LEFT BORE-WMV13 |
| 9 | 810779 | CAP |
| 10 | NSS | NOT SOLD SEPARATE, Idle Mixture Screw/Spring |
| 11 | 1395-8113523 | LEVER KIT |
| 12 | 1395-6031 | SPACER |
| 13 | NSS | NOT SOLD SEPARATE, Spring |
| 14 | NSS | NOT SOLD SEPARATE, Gasket-Fuel Bowl |
| 15 | 810738 | FLOAT ASSEMBLY |
| 16 | F10064 | SHAFT |
| 17 | 1395-5902 | SCREW, (#6-32 x .187) |
| 18 | 1395-8116901 | VALVE SEAT KIT Comment: (WMV-11/13A) |
| 19 | NSS | NOT SOLD SEPARATE, Gasket-Valve Seat |
| 20 | 1395-8236241 | BOWL, Fuel (CENTER/BOTTOM) |
| 21 | 1395-808612 | SCREW AND WASHER, (#8-32 x .750) |
| 22 | 1395-811694 | PLUG KIT |
| 23 | 1395-802731 | SEAL (CONSISTS OF 4 GASKETS) |
| 24 | 1399-3517 | JET, (.084) Comment: (STBD.) WMV-13 |
| 25 | 1395-7900 | TEE FITTING (TOP/CENTER) |
| 26 | 1395-7901 | ELBOW (BOTTOM) |
▶CARBURETOR(SEAPRO/MARATHON) (S/N-0G303045 & BELOW) (29 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 27-814195A93 | GASKET SET |
| 1 | 3311-818650A76 | CARBURETOR Comment: (BOTTOM) |
| 2 | 810779 | CAP |
| 3 | NSS | NOT SOLD SEPARATE, Idle Needle/Spring |
| 4 | 27-677511 | GASKET |
| 5 | 1399-7570 | JET, .040 Comment: (CENTER/BOTTOM) |
| 6 | 1395-6207 | JET, (.072) |
| 7 | 1399-5225 | JET, Main (.054) Comment: (CENTER/BOTTOM) |
| 8 | 1395-811694 | PLUG |
| 9 | NSS | NOT SOLD SEPARATE, Gasket-Plug |
| 10 | NSS | NOT SOLD SEPARATE, Spring-Valve Return |
| 11 | 8107221 | LEVER, Throttle Comment: (CENTER) |
| 12 | 1395-811284 | SPACER |
| 13 | 12-810745 | WASHER |
| 14 | 11-810744 | NUT |
| 15 | NSS | NOT SOLD SEPARATE, Gasket-Fuel Bowl |
| 16 | 810738 | FLOAT ASSEMBLY |
| 17 | NSS | NOT SOLD SEPARATE, Screw-Float Pin |
| 18 | F10064 | SHAFT |
| 19 | 1395-8116901 | VALVE SEAT KIT |
| 20 | NSS | NOT SOLD SEPARATE, Gasket-Vavle Seat |
| 21 | 1395-823624 | BOWL, Fuel Comment: (CENTER/BOTTOM) |
| 22 | 1395-6030 | JET, (.070) |
| 23 | 1395-808612 | SCREW AND WASHER, (#8-32 x .750) |
| 24 | 1395-823626 | POWER JET |
| 25 | NSS | NOT SOLD SEPARATE, Seal-Bowl Drain Plug |
| 26 | 95961 | PLUG, Bowl Drain |
| 27 | 1395-7900 | TEE FITTING Comment: (TOP/CENTER) |
| 28 | 1395-7901 | ELBOW Comment: (BOTTOM) |
▶CRANKSHAFT, PISTONS - AND CONNECTING RODS (22 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 482-9784A4 | CRANKSHAFT Comment: SN# 0G303046 & Up |
| 2 | 30-67923T | BEARING, Ball (LOWER) |
| 3 | 53-67446 | RING |
| 4 | 43-19301 | GEAR |
| 5 | 39-843198T01 | RING |
| 6 | 28-91800 | KEY, Woodruff |
| 7 | 25-35126 | O-RING, (.859 x .139) |
| 8 | 817001A1 | RACE ASSEMBLY, Bearing |
| 9 | 700-878573A2 | PISTON ASSEMBLY Comment: (PORT-.030 O/S) |
| 10 | 53-8320811 | LOCK RING |
| 11 | 39-875257A12 | RING SET, Piston Comment: (.030 O/S) |
| 12 | 600-8M0125869 | CONNECTING ROD ASSEMBLY |
| 13 | 10-94320 | SCREW, (.375-24 x 1.250) |
| 14 | 31-844338A01 | BEARING/CAGE KIT |
| 15 | 12-88263 | THRUST WASHER |
| 16 | 29-8M0204715 | NEEDLE, Roller Bearing |
| 17 | 31-816773A2 | BEARING ASSEMBLY (UPPER) |
| 18 | 26-859093 | SEAL, Oil |
| 19 | 25-823683 | O-RING, (1.989 x .070) |
| 20 | 12-33001 | WASHER, (.641 x 1.250 x .190) |
| 21 | 11-42979 | NUT, (M16) |
▶CYLINDER BLOCK AND END CAP (72 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 885-9811A19 | CYLINDER BLOCK Comment: SN# 0G438000 & Up |
| 2 | 16-903509 | STUD, (M10 x 1.5 x 64) |
| 3 | 16-8154431 | STUD, (M10 x 1.5 x 155) |
| 4 | 22-328022 | PLUG, Pipe (.125-27) |
| 5 | 22-36382 | FITTING, (.250-18 x .62) Brass Comment: (SEAPRO/MARATHON) |
| 6 | 8248577 | DEFLECTOR, Water Comment: SN# 0G438000 & Up |
| 7 | 21-8781051 | FITTING |
| 8 | 22-8245021 | CONNECTOR |
| 9 | 8215832 | PIN |
| 10 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 11 | 22-768431 | FITTING Comment: SN# 0G438000 THRU 0G485988 |
| 12 | 21-8348041 | CHECK VALVE Comment: SN# 0G485989 & Up |
| 13 | 21-8282182 | CHECK VALVE Comment: SN# 0G485989 & Up |
| 14 | 21-426585 | CHECK VALVE |
| 15 | 10-81893435 | SCREW, (M8 x 35) |
| 16 | 21-8159234 | CHECK VALVE |
| 17 | 10-82446180 | SCREW, (M10 x 80) |
| 18 | 17-8M0036405 | PIN |
| 19 | 825367A1 | CARRIER ASSEMBLY (INCLUDES 6 CARRIERS) Comment: (13 Tooth Splines) SN# 0G129222 THRU 0G437999 |
| 20 | 21-42657A3 | CHECK VALVE Comment: (13 Tooth Splines) SN# 0G129222 THRU 0G437999 |
| 21 | 19-850309001 | PLUG Comment: SN# 0G438000 & Up |
| 22 | 22-8167811 | ELBOW (45 DEGREES) Comment: SN# 0G129221 & Below |
| 23 | 8217621 | TIMING POINTER |
| 24 | 10-82130012 | SCREW, (M6 x 12) |
| 25 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 26 | 32-826544A1 | TUBING KIT Comment: SN# 0G129222 & Up |
| 27 | 32-826544A1 | TUBING (9-1/4 IN.) Comment: SN# 0G129221 & Below |
| 28 | 32-892024122 | TUBING, (20.00 Feet Bulk) (22-1/2 IN.) |
| 29 | 12-8M0214963 | WASHER, (.406 x .750 x .104) |
| 30 | 11-4013610 | NUT, (M10) |
| 31 | 32-892024122 | TUBING, (20.00 Feet Bulk) (3-3/4 IN.) Comment: SN# 0G438000 & Up |
| 32 | 821556 | RETAINER, Check Valve |
| 33 | 10-48408 | SCREW, (#10-16 x .500) |
| 34 | 22-8243561 | FITTING |
| 35 | 822283 | BRACKET Comment: SN# 0G129221 & Below |
| 36 | 10-82130012 | SCREW, (M6 x 12) |
| 37 | 8211051 | BRACKET, Alternator |
| 38 | 10-81893450 | SCREW, (M8 x 50) |
| 39 | 8212251 | BRACKET |
| 40 | 10-82130012 | SCREW, (M6 x 12) |
| 41 | 822486 | BRACKET, Guide |
| 42 | 821909 | SENSOR |
| 43 | 10-82104510 | SCREW, (M5 x 10) |
| 44 | 818574 | SEAL |
| 45 | 25-818573 | O-RING |
| 46 | 812851A2 | CYLINDER HEAD |
| 47 | 75692 | THERMOSTAT (143 DEGREES) Comment: SN# 0G437999 & Below |
| 48 | 27-8M0204714 | GASKET |
| 49 | 19801A1 | COVER, Thermostat Comment: USE WITH 90 DEGREE ELBOW |
| 50 | 22-687271 | FITTING, (.250-18) 90 Degree - Brass (90 DEGREES) Comment: USE WITH 90 DEGREE ELBOW |
| 51 | 32-77653101 | HOSE, (59.00 Inches Bulk) (20 IN.)(21-1/2 IN.) Comment: USE WITH 90 DEGREE ELBOW |
| 52 | 10-82446090 | SCREW, (M8 x 90) |
| 53 | 10-8M0045380 | SCREW, (M8 x 50) |
| 54 | 13536A14 | SENSOR ASSEMBLY Comment: SN# 0G217419 & Below |
| 55 | 84-88807A37 | CABLE ASSEMBLY Comment: SN# 0G217419 & Below |
| 56 | 828523 | RETAINER, Sensor Comment: DESIGN I |
| 57 | 10-828552 | SCREW, (.375-16 x .500) Comment: DESIGN I |
| 58 | 137151 | RETAINER Comment: DESIGN II |
| 59 | 10-81893412 | SCREW, (M8 x 12) Comment: DESIGN II |
| 60 | 1171-9787A4 | END CAP ASSEMBLY Comment: SN# 0G303046 & Up |
| 61 | 25-62700 | O-RING, (3.237 x .103) |
| 62 | 26-8308981 | SEAL, Oil Comment: SN# 0G303046 & Up |
| 63 | 26-859093 | SEAL, Oil Comment: SEE SERVICE BULLETIN 95-4 SN# 0G303045 & Below |
| 64 | 10-82130020 | SCREW, (M6 x 20) |
| 65 | 434531 | PLUG Comment: SEAPRO/MARATHON |
| 66 | 25-8M0204667 | O-RING Comment: SEAPRO/MARATHON |
| 67 | 10-82104520 | SCREW, (M5 x 20) (M5 X 20) Comment: SEAPRO/MARATHON |
| 68 | 8261211 | BRACKET |
| 69 | 10-48408 | SCREW, (#10-16 x .500) |
| 70 | 10-82130012 | SCREW, (M6 x 12) |
| 71 | 8266241 | CLAMP |
▶DRIVESHAFT HOUSING(S/N-0G437999 AND BELOW) (29 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3519-818453A1 | HOUSING ASSEMBLY, Driveshaft Comment: (GRAY-X/XX-LONG) |
| 2 | 16-8M0008031 | STUD (M12 X 1.75 X 50) Comment: (L/X-LONG) |
| 3 | 10-82130130 | SCREW, (M10 x 30) Comment: (L/X-LONG) |
| 4 | 25-89417 | GROMMET |
| 5 | 12-4002321 | WASHER, (12.80 mm x 24.0 mm x 2.4 mm) Stainless Steel |
| 6 | 11-4013812 | NUT (M12 X 1.75) |
| 7 | 19-64649 | PLUG |
| 8 | 10-898834 | SCREW, (M14 x 178) |
| 9 | 88238A10 | CABLE ASSEMBLY, Ground |
| 10 | 12-815432 | WASHER, (.562 x 2.00 x .125) |
| 11 | 12-8154331 | WASHER |
| 12 | 8137711 | MOUNT |
| 13 | 12-825190 | WASHER |
| 14 | 11-896602 | NUT |
| 15 | 8186442 | CLAMP |
| 16 | 10-81893435 | SCREW, (M8 x 35) |
| 17 | 13-72521 | LOCKWASHER, Internal Tooth |
| 18 | 818645F2 | COVER (GRAY) |
| 19 | 10-69079 | SCREW, (#10-16 x .440) |
| 20 | 816503 | SEAL |
| 21 | 826384T1 | TUBE, Exhaust |
| 22 | 10-81893435 | SCREW, (M8 x 35) |
| 23 | 32-8141966 | TUBE, Water Comment: (XX-LONG) |
| 24 | 814080001 | SEAL |
| 25 | 814081 | CLAMP |
| 26 | 8M0105088 | SPACER Comment: (GRAY) XX-LONG |
| 27 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) Comment: XX-LONG |
| 28 | 16-824118 | STUD (M10 X 1.5 X 173) Comment: XX-LONG |
| 29 | 11-400636 | NUT (M10 X 1.5) Comment: XX-LONG |
▶DRIVESHAFT HOUSING(S/N-0G438000 AND UP) (29 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3519-832938A3 | HOUSING ASSEMBLY, Driveshaft Comment: (WHITE-X/XX-LONG) |
| 2 | 16-8M0008031 | STUD (M12 X 1.75 X 50) |
| 3 | 10-82130130 | SCREW, (M10 x 30) |
| 4 | 25-8331231 | GROMMET |
| 5 | 12-4002321 | WASHER, (12.80 mm x 24.0 mm x 2.4 mm) Stainless Steel |
| 6 | 11-4013812 | NUT (M12 X 1.75) |
| 7 | 19-64649 | PLUG |
| 8 | 10-898834 | SCREW, (M14 x 178) |
| 9 | 88238A10 | CABLE ASSEMBLY, Ground |
| 10 | 12-815432 | WASHER, (.562 x 2.00 x .125) |
| 11 | 12-8154331 | WASHER |
| 12 | 8137711 | MOUNT |
| 13 | 12-825190 | WASHER |
| 14 | 11-896602 | NUT |
| 15 | 8186442 | CLAMP |
| 16 | 10-81893435 | SCREW, (M8 x 35) |
| 17 | 13-72521 | LOCKWASHER, Internal Tooth |
| 18 | 818645F4 | COVER Comment: (WHITE) |
| 19 | 10-69079 | SCREW, (#10-16 x .440) |
| 20 | 8329321 | SEAL |
| 21 | 833116A7 | TUBE ASSEMBLY, Exhaust |
| 22 | 10-81893435 | SCREW, (M8 x 35) |
| 23 | 32-8M0042787 | TUBE, Water Comment: (XX-LONG) |
| 24 | 832940001 | SEAL |
| 25 | 8329391 | CLAMP |
| 26 | 823979T5 | SPACER Comment: (WHITE) XX-LONG |
| 27 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) Comment: XX-LONG |
| 28 | 16-824118 | STUD (M10 X 1.5 X 173) Comment: XX-LONG |
| 29 | 11-400636 | NUT (M10 X 1.5) Comment: XX-LONG |
▶Dual Engine Tie Bar Kit (21 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92876A9 | EXTENSION KIT, Dual Engine |
| 1 | 715651 | TUBE, Steering Cable |
| 2 | 25-48462 | O-RING, (.614 x .070) |
| 3 | 41055 | MOUNT |
| 4 | 14-42100 | TAB WASHER |
| 5 | 11-8M0041651 | NUT, (.875-14) |
| 6 | 88404 | TAB WASHER |
| 7 | 10-38601 | SCREW, (.250-28 x 1.250) |
| 8 | 17729A1 | BRACKET |
| 9 | 10-62055 | SCREW, (.312-24 x 1.250) |
| 10 | 17728 | TAB WASHER |
| 11 | 10-140001 | SCREW, (.375-24 x 1.38) |
| 12 | 11-8M0204726 | NUT, (.375-24) |
| 13 | 8M0026167 | STEERING EYE |
| 14 | 23-23651 | SLEEVE, (1.625) |
| 15 | 97931 | TUBING, (4.00 Inches) |
| 16 | 8M0026098 | COUPLER, (15.00 Inches) |
| 17 | 11-42099 | NUT, (.562-18) |
| 18 | 22-821169 | COUPLING |
| 19 | 12-34931 | WASHER, (.406 x .734 x .063) Stainless Steel |
| 20 | 10-94319 | SCREW, (.375-24 x 1.5) |
▶ELECTRICAL(ALL MODELS-S/N:0G303046 & UP) (47 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 825296T1 | PLATE, Electrical Mounting |
| 2 | 10-82129114 | SCREW, (M6 x 14) |
| 3 | 827509T7 | CDM ASSEMBLY |
| 4 | 84-821945A61 | CABLE ASSEMBLY, Hi Tension (SINGLE CABLE) |
| 5 | 85-63709A1 | BOOT/TERMINAL KIT |
| 6 | 10-82129116 | SCREW, (M6 x 16) |
| 7 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 8 | 33-941 | SPARK PLUG (CHAMPION #QL77CC) |
| 9 | 10-81893435 | SCREW, (M8 x 35) |
| 10 | 12-56720 | WASHER, (.330 x .750 x .060) Stainless Steel |
| 11 | 25-825380001 | GROMMET |
| 12 | 23-19064 | BUSHING |
| 13 | 830044T16 | ECU, Engine Control Unit Comment: (SEAPRO/MARATHON) SN# 0G438000 & Up |
| 14 | 10-82129145 | SCREW, (M6 x 45) |
| 15 | 54-826188 | CLAMP |
| 16 | 10-82104520 | SCREW, (M5 x 20) |
| 17 | 84-825433A10 | HARNESS ASSEMBLY, Ignition |
| 18 | 13541 | PLUG, Male (SEAPRO/MARATHON) |
| 19 | 25-818967 | GROMMET |
| 20 | 828102 | BRACKET |
| 21 | 8M0207773 | RELAY |
| 22 | 84-826802A2 | HARNESS ASSEMBLY, Trim |
| 23 | 84-88439A34 | CABLE ASSEMBLY, Positive - Battery |
| 24 | 84-88439A24 | CABLE ASSEMBLY, Negative - Battery |
| 25 | 84-827356A2 | HARNESS ASSEMBLY (26 IN.) |
| 26 | 8216091 | COVER |
| 27 | 10-82239320 | SCREW, (M5 x 20) (M5 X 0.8) |
| 28 | 88-812619 | FUSE, Yellow - 20 Ampere |
| 29 | 88-19637 | SOCKET, Fuse |
| 30 | 84-93388A8 | CABLE ASSEMBLY, Black |
| 31 | 8212282 | PLATE, Solenoid Mounting |
| 32 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 33 | 10-82129125 | SCREW, (M6 x 25) |
| 34 | 84-88807A16 | CABLE ASSEMBLY, (4.00 Inches) Black |
| 35 | 86-45915 | TERMINAL BLOCK |
| 36 | 10-878607 | SCREW, (#10-16 x .380) |
| 37 | 89-817109A2 | SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 38 | 23-8M0214955 | BUSHING |
| 39 | 13-53166 | LOCKWASHER, (.312) |
| 40 | 11-8M0204668 | NUT, (.312-18) |
| 41 | 10-32,11-45076 | NUT, Brass |
| 42 | 54-850895 | CLAMP |
| 43 | 54-850896 | CLAMP, (28.6) |
| 44 | 850802 | BRACKET |
| 45 | 32-850803 | HOSE (INLET) |
| 46 | 32-850804 | HOSE (OUTLET) |
| 47 | 850801T2 | PULSE FLUSH |
▶ELECTRICAL(S/N:0G129221 & BELOW NON SEAPRO/MARATHON) (44 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 8211861 | PLATE, Electrical Mounting |
| 2 | 827509A12 | CDM ASSEMBLY |
| 3 | 10-82129114 | SCREW, (M6 x 14) |
| 4 | 84-821945A56 | CABLE ASSEMBLY, Hi Tension |
| 5 | 85-63709A1 | BOOT/TERMINAL KIT |
| 6 | 33-938 | SPARK PLUG (BPZ8H-N-10) |
| 7 | 10-81893435 | SCREW, (M8 x 35) |
| 8 | 12-56720 | WASHER, (.330 x .750 x .060) Stainless Steel |
| 9 | 25-88033 | GROMMET |
| 10 | 23-19064 | BUSHING |
| 11 | 824866A1 | ECU, Engine Control Unit |
| 12 | 10-82129140 | SCREW, (M6 x 40) |
| 13 | 823882 | COVER |
| 14 | 84-88439A3 | CABLE ASSEMBLY, Positive - Battery |
| 15 | 84-88439A4 | CABLE ASSEMBLY, Battery - Negative |
| 16 | 89-817109A2 | SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 17 | 10-32,11-45076 | NUT, Brass |
| 18 | 13-53166 | LOCKWASHER, (.312) |
| 19 | 11-8M0204668 | NUT, (.312-18) |
| 20 | 10-82129125 | SCREW, (M6 x 25) |
| 21 | 23-8M0214955 | BUSHING |
| 22 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 23 | 8212281 | PLATE, Solenoid Mounting |
| 24 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 25 | 10-82129110 | SCREW, (M6 x 10) |
| 26 | 84-87379A46 | CABLE ASSEMBLY, (5.750 Inches) (RED) |
| 27 | 8216091 | COVER |
| 28 | 84-93388A8 | CABLE ASSEMBLY, Black |
| 29 | 89-8M0185145 | SOLENOID ASSEMBLY |
| 30 | 23-8M0214955 | BUSHING |
| 31 | 25-818967 | GROMMET |
| 32 | 84-88807A16 | CABLE ASSEMBLY, (4.00 Inches) Black |
| 33 | 8-32,11-26419 | NUT, Brass |
| 34 | 86-45915 | TERMINAL BLOCK |
| 35 | 10-48408 | SCREW, (#10-16 x .500) |
| 36 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 37 | 11-94330 | NUT, (.250-20) Brass |
| 38 | 10-82239320 | SCREW, (M5 x 20) (M5 X 0.8) |
| 39 | 88-812619 | FUSE, Yellow - 20 Ampere |
| 40 | 88-19637 | SOCKET, Fuse |
| 41 | 84-821967T3 | HARNESS ASSEMBLY, Engine Wiring Comment: (SEE SERVICE BULLETIN 94-8) |
| 42 | 92753 | RETAINER |
| 43 | 54-826188 | CLAMP |
| 44 | 10-82104520 | SCREW, (M5 x 20) |
▶ELECTRICAL(S/N:0G129222-0G303045 NON SEAPRO/MARATHON) (50 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 825296 | PLATE, Electrical Mounting |
| 2 | 827509A12 | CDM ASSEMBLY |
| 3 | 10-82129114 | SCREW, (M6 x 14) |
| 4 | 84-821945A56 | CABLE ASSEMBLY, Hi Tension |
| 5 | 85-63709A1 | BOOT/TERMINAL KIT |
| 6 | 33-938 | SPARK PLUG (BPZ8H-N-10) |
| 7 | 10-81893435 | SCREW, (M8 x 35) |
| 8 | 12-56720 | WASHER, (.330 x .750 x .060) Stainless Steel |
| 9 | 25-825380001 | GROMMET |
| 10 | 23-19064 | BUSHING |
| 11 | 825753T02 | ECU, Engine Control Unit |
| 12 | 10-82129145 | SCREW, (M6 x 45) |
| 13 | 54-826188 | CLAMP |
| 14 | 10-82104520 | SCREW, (M5 x 20) |
| 15 | 8212281 | PLATE, Solenoid Mounting Comment: DESIGN I W/ TRIM SOLENOIDS |
| 16 | 89-8M0185145 | SOLENOID ASSEMBLY Comment: DESIGN I W/ TRIM SOLENOIDS |
| 17 | 23-8M0214955 | BUSHING Comment: DESIGN I W/ TRIM SOLENOIDS |
| 18 | 25-818967 | GROMMET Comment: DESIGN I W/ TRIM SOLENOIDS |
| 19 | 84-87379A46 | CABLE ASSEMBLY, (5.750 Inches) (RED) Comment: DESIGN I W/ TRIM SOLENOIDS |
| 20 | 8-32,11-26419 | NUT, Brass Comment: DESIGN I W/ TRIM SOLENOIDS |
| 21 | 13-26992 | LOCKWASHER, (.250) Stainless Steel Comment: DESIGN I W/ TRIM SOLENOIDS |
| 22 | 11-94330 | NUT, (.250-20) Brass Comment: DESIGN I W/ TRIM SOLENOIDS |
| 23 | 84-825433A7 | HARNESS ASSEMBLY, IGNITION Comment: DESIGN I W/ TRIM SOLENOIDS |
| 24 | 84-17201A9 | HARNESS ASSEMBLY, TRIM Comment: DESIGN I W/ TRIM SOLENOIDS |
| 25 | 8212282 | PLATE, Solenoid Mounting Comment: DESIGN II |
| 26 | 84-825433A7 | HARNESS ASSEMBLY, IGNITION Comment: DESIGN II |
| 27 | 84-826802A2 | HARNESS ASSEMBLY, Trim Comment: DESIGN II |
| 28 | 25-818967 | GROMMET Comment: DESIGN II |
| 29 | 828102 | BRACKET Comment: DESIGN II |
| 30 | 8M0207773 | RELAY Comment: DESIGN II |
| 31 | 84-827356A2 | HARNESS ASSEMBLY, SHIFT INTERRUPT (26 IN.) |
| 32 | 84-88439A34 | CABLE ASSEMBLY, Positive - Battery |
| 33 | 84-88439A24 | CABLE ASSEMBLY, Negative - Battery |
| 34 | 8216091 | COVER |
| 35 | 10-82239320 | SCREW, (M5 x 20) (M5 X 0.8) |
| 36 | 88-812619 | FUSE, Yellow - 20 Ampere |
| 37 | 88-19637 | SOCKET, Fuse |
| 38 | 86-45915 | TERMINAL BLOCK |
| 39 | 10-878608 | SCREW, (#10-16 x .500) |
| 40 | 10-82129110 | SCREW, (M6 x 10) |
| 41 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 42 | 84-93388A8 | CABLE ASSEMBLY, Black |
| 43 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 44 | 89-817109A2 | SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 45 | 23-8M0214955 | BUSHING |
| 46 | 10-32,11-45076 | NUT, Brass |
| 47 | 13-53166 | LOCKWASHER, (.312) |
| 48 | 11-8M0204668 | NUT, (.312-18) |
| 49 | 10-82129125 | SCREW, (M6 x 25) |
| 50 | 84-88807A16 | CABLE ASSEMBLY, (4.00 Inches) Black |
▶ELECTRICAL(SEAPRO/MARATHON S/N-0G303045 & BELOW (40 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 825296 | PLATE, Electrical Mounting |
| 2 | 827509A12 | CDM ASSEMBLY |
| 3 | 10-82129114 | SCREW, (M6 x 14) |
| 4 | 84-821945A56 | CABLE ASSEMBLY, Hi Tension |
| 5 | 85-63709A1 | BOOT/TERMINAL KIT |
| 6 | 33-938 | SPARK PLUG (BPZ8H-N-10) |
| 7 | 10-81893435 | SCREW, (M8 x 35) |
| 8 | 12-56720 | WASHER, (.330 x .750 x .060) Stainless Steel |
| 9 | 25-825380001 | GROMMET |
| 10 | 23-19064 | BUSHING |
| 11 | 8257531 | ECU, Engine Control Unit |
| 12 | 10-82129145 | SCREW, (M6 x 45) |
| 13 | 54-826188 | CLAMP |
| 14 | 10-82104520 | SCREW, (M5 x 20) |
| 15 | 84-825433A7 | HARNESS ASSEMBLY |
| 16 | 25-818967 | GROMMET |
| 17 | 828102 | BRACKET |
| 18 | 8M0207773 | RELAY |
| 19 | 84-826802A2 | HARNESS ASSEMBLY, Trim |
| 20 | 84-88439A34 | CABLE ASSEMBLY, Positive - Battery |
| 21 | 84-88439A24 | CABLE ASSEMBLY, Negative - Battery |
| 22 | 8216091 | COVER |
| 23 | 10-82239320 | SCREW, (M5 x 20) (M5 X 0.8) |
| 24 | 88-812619 | FUSE, Yellow - 20 Ampere |
| 25 | 88-19637 | SOCKET, Fuse |
| 26 | 84-93388A8 | CABLE ASSEMBLY, Black |
| 27 | 8212282 | PLATE, Solenoid Mounting |
| 28 | 10-82129110 | SCREW, (M6 x 10) |
| 29 | 10-82155025 | SCREW, (M8 x 25) Stainless Steel |
| 30 | 10-82129125 | SCREW, (M6 x 25) |
| 31 | 84-88807A16 | CABLE ASSEMBLY, (4.00 Inches) Black |
| 32 | 86-45915 | TERMINAL BLOCK |
| 33 | 10-878607 | SCREW, (#10-16 x .380) |
| 34 | 89-817109A2 | SOLENOID ASSEMBLY, (#10-32 / .3125-18 Terminals) |
| 35 | 23-8M0214955 | BUSHING |
| 36 | 13-53166 | LOCKWASHER, (.312) |
| 37 | 11-8M0204668 | NUT, (.312-18) |
| 38 | 10-32,11-45076 | NUT, Brass |
| 39 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 40 | 13541 | PLUG, Male |
▶EXHAUST PLATE (46 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 832935A1 | PLATE ASSEMBLY, Exhaust Comment: SN# 0G438000 & Up |
| 2 | 832994 | STRAINER Comment: SN# 0G437999 & Below |
| 3 | 27-8329335 | GASKET Comment: SN# 0G438000 & Up |
| 4 | NLA | No Longer Available, Gasket Comment: (REFER TO SERVICE BULLETIN #94-11) SN# 0G437999 & Below |
| 5 | 27-823988 | GASKET (LOWER) Comment: SN# 0G437999 & Below |
| 6 | 24-64878 | SPRING Comment: SN# 0G693842 & Up |
| 7 | 27-8329344 | GASKET (LOWER) Comment: SN# 0G438000 & Up |
| 8 | 8M0043157 | SEAL |
| 9 | 10-81893435 | SCREW, (M8 x 35) |
| 10 | 65663A2 | COVER |
| 11 | 65664A1 | PLATE ASSEMBLY |
| 12 | 27-88907003 | GASKET |
| 13 | 10-69570 | SCREW, (#10-16 x .750) |
| 14 | 12-76451 | WASHER |
| 15 | 648771 | DIAPHRAGM |
| 16 | 814189 | POPPET |
| 17 | 25-814191 | GROMMET |
| 18 | 814190 | CARRIER |
| 19 | 10-81893435 | SCREW, (M8 x 35) |
| 20 | 22-34982 | CONNECTOR |
| 21 | 22-782792 | ELBOW (45 DEGREES) |
| 22 | 22-821975 | ELBOW, 45 Degree (45 DEGREES) |
| 23 | 821255 | BOOT, Idle Exhaust |
| 24 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 25 | 32-8M0108355 | HOSE, (57.00 Inches Bulk) (2-1/2 IN.) |
| 26 | 22-8M0077650 | FITTING, Tell-Tale |
| 27 | 19-821908 | PLUG |
| 28 | 12-821915 | WASHER |
| 29 | 8219631 | CHECK VALVE |
| 30 | 25-30641 | O-RING, (.299 x .103) |
| 31 | 22-821952 | FITTING |
| 32 | 32-821976 | HOSE |
| 33 | 21-817519A1 | CHECK VALVE ASSEMBLY, Drain |
| 34 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 35 | 11-401386 | NUT, (M6) |
| 36 | 12-35459 | WASHER |
| 37 | 824012 | ROLLER |
| 38 | 11-401386 | NUT, (M6) |
| 39 | 883142A03 | SHIFT LINK |
| 40 | 23-42994 | BUSHING |
| 41 | 8240703 | SHIFT SHAFT, Upper Comment: (XX-LONG) |
| 42 | 23-48237 | BUSHING |
| 43 | 25-19565002 | GROMMET |
| 44 | 43585 | COUPLING |
| 45 | 19-828808 | PLUG Comment: SN# 0G178947 & Below |
▶FLYWHEEL/STATOR (13 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 11-401386 | NUT, (M6) |
| 2 | 19-45907 | PLUG, Yellow |
| 3 | 272-821033T2 | FLYWHEEL |
| 4 | 398-821935A5 | STATOR Comment: (SeaPro/Marathon) SN# 0G129222 & Up |
| 5 | 10-82494830 | SCREW, (M6 x 30) |
| 6 | 821663A1 | ALTERNATOR Comment: DESIGN II |
| 7 | 10-82446155 | SCREW, (M10 x 55) Comment: DESIGN II |
| 7/8 | 10-82130140 | SCREW, (M10 x 40) (M10 X 40) Comment: DESIGN I |
| 8 | 10-82130140 | SCREW, (M10 x 40) (M10 X 40) Comment: DESIGN II |
| 9 | 12-796431 | WASHER Comment: DESIGN II |
| 10 | 11-4013610 | NUT, (M10) Comment: DESIGN II |
| 11 | 57-49756Q1 | V BELT |
| 12 | 12-17457 | WASHER |
▶FUEL LINES(NON SEAPRO/MARATHON) (25 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 22-822769 | CONNECTOR |
| 2 | 32-8M0108349 | TUBING, (28.00 Inches Bulk) (4 IN.)(1-1/2 IN.)(7 IN.)(13-1/2 IN.) |
| 3 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 4 | 22-8189941 | CHECK VALVE |
| 5 | 32-82381335 | TUBING, (12.00 Inches Bulk) (6 IN.) |
| 6 | 22-818992 | CONNECTOR |
| 7 | 35-816296Q2 | FILTER, Fuel |
| 8 | 54-49542 | CLAMP |
| 9 | 10-82130012 | SCREW, (M6 x 12) |
| 10 | 32-8M0108355 | HOSE, (57.00 Inches Bulk) (6-1/2 IN.)(5 IN.)(5 IN.)(4-1/2 IN.) |
| 11 | 10-4008820 | SCREW, (M6 x 20) |
| 12 | 13-400256 | LOCKWASHER, (M6) |
| 13 | 11-401386 | NUT, (M6) |
| 14 | 822528T | SOLENOID VALVE |
| 15 | 8224931 | BRACKET |
| 16 | 32-9912878 | HOSE, (.187) (26.00 Inches Bulk) (8-3/4 IN.)(8-3/4 IN.)(6 IN.) |
| 17 | 28-89694 | KEY |
| 18 | 821153 | COUPLING |
| 19 | 8212021 | BRACKET, Sensor |
| 20 | 821664 | SENSOR, Throttle Position (TPI) |
| 21 | 10-4005685 | SCREW, (M4 x 10) |
| 22 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel |
| 23 | 8,13-26995 | LOCKWASHER, Stainless Steel |
| 24 | 23-82459612 | OVERSLEEVE |
| 25 | 56762 | TIE STRAP, (4.00 Inches) |
▶FUEL LINES(SEAPRO/MARATHON) (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 32-8M0108355 | HOSE, (57.00 Inches Bulk) (5 IN.)(5 IN.)(4-1/2 IN.)(16 IN.) |
| 2 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 3 | 10-4008820 | SCREW, (M6 x 20) |
| 4 | 13-400256 | LOCKWASHER, (M6) |
| 5 | 11-401386 | NUT, (M6) |
| 6 | 23-82459612 | OVERSLEEVE |
| 7 | 56762 | TIE STRAP, (4.00 Inches) |
| 8 | 32-9912878 | HOSE, (.187) (26.00 Inches Bulk) (8-3/4 IN.)(8-3/4 IN.)(6 IN.) |
| 9 | 822528T | SOLENOID VALVE |
| 10 | 8224931 | BRACKET |
| 11 | 10-4005685 | SCREW, (M4 x 10) |
| 12 | 12-30164 | WASHER, (.192 x .375 x .0312) Stainless Steel |
| 13 | 8,13-26995 | LOCKWASHER, Stainless Steel |
| 14 | 821664 | SENSOR, Throttle Position (TPI) |
| 15 | 8212021 | BRACKET, Sensor |
| 16 | 821153 | COUPLING |
| 17 | 28-89694 | KEY |
| 18 | 54-67015 | CLAMP |
| 19 | 10-82130012 | SCREW, (M6 x 12) |
▶FUEL PUMP (26 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SeaPro/Marathon) |
| 1 | 14360A78 | PUMP ASSEMBLY, Fuel |
| 2 | 21-857005A1 | DIAPHAGM KIT |
| 3 | NSS | NOT SOLD SEPARATE, Check Valve-Rubber |
| 4 | NSS | NOT SOLD SEPARATE, Check Valve |
| 5 | NSS | NOT SOLD SEPARATE, Retainer |
| 6 | NSS | NOT SOLD SEPARATE, Gasket-Boost |
| 7 | NSS | NOT SOLD SEPARATE, Cap |
| 8 | NSS | NOT SOLD SEPARATE, Spring |
| 9 | NSS | NOT SOLD SEPARATE, Diaphragm |
| 10 | NSS | NOT SOLD SEPARATE, Gasket-Pulse |
| 11 | NSS | NOT SOLD SEPARATE, Spring |
| 12 | NSS | NOT SOLD SEPARATE, Cap |
| 13 | 27-8M0204705 | GASKET |
| 14 | 144303 | BASE |
| 15 | 987752 | PLATE |
| 16 | 22-629101 | ELBOW, (.125-27) (90 DEGREES) |
| 17 | 10-82130050 | SCREW, (M6 x 50) |
| 18 | 10-82104540 | SCREW, (M5 x 40) |
| 19 | 54-816311T | TIE STRAP, (8.00 Inches) Comment: SEAPRO/MARATHON |
| 20 | 10-82130012 | SCREW, (M6 x 12) Comment: SEAPRO/MARATHON |
| 21 | 826635 | BRACKET Comment: SEAPRO/MARATHON |
| 22 | 35-826634T01 | FILTER, Fuel Comment: SEAPRO/MARATHON |
| 23 | 32-830769 | HOSE (INLET) Comment: SEAPRO/MARATHON |
| 24 | 32-830770 | HOSE (OUTLET) Comment: SEAPRO/MARATHON |
| 25 | 22-822769 | CONNECTOR Comment: SEAPRO/MARATHON |
▶G./HSG(PROP-STD-S/N-0G437999 & BELOW-1623-822442C2 (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-816575A5 | SEAL KIT, Gear Housing |
| 1 | 1623-822442A26 | GEAR HOUSING ASSEMBLY, Basic - Gray |
| 43 | 8M0226861 | SHIFT CRANK |
| 44 | 818349T1 | SPOOL KIT |
| 45 | 15-47397A1 | SHIM SET |
| 46 | 31-828439A2 | BEARING ASSEMBLY, Tapered Roller Comment: (USE WITH 1623-822442C3 CASTING) |
| 47 | 43-878087A4 | GEAR ASSEMBLY, Forward Comment: (NOTE: THIS COMPLETE GEAR SET IS A 1.62:1- 13/21 REPLACING A 1.64:1- 17/28) |
| 48 | 31-30895T | BEARING, Needle |
| 49 | 24-30893 | SPRING |
| 50 | 52-853594T | SLIDING CLUTCH |
| 51 | 17-78909 | PIN, Detent |
| 52 | 17-8M0100263 | PIN, Cross |
| 53 | 44-8M0140440 | PROPELLER SHAFT |
| 54 | NSS | NOT SOLD SEPARATE, Reverse Gear Comment: (1.62:1 - 13/21)(PART OF 43-828072A2) |
| 55 | 23-824108 | SPACER |
| 56 | 681001 | RING, Thrust |
| 57 | 30-88957T | BEARING ASSEMBLY, Ball |
| 58 | 25-8M0214920 | O-RING |
| 59 | 818763T11 | CARRIER ASSEMBLY, Bearing |
| 60 | 31-30956T | BEARING, Needle |
| 61 | 26-14077 | SEAL, Oil (INSIDE) |
| 62 | 26-8M0204670 | SEAL (OUTSIDE) |
| 63 | 14-18323 | TAB WASHER |
| 64 | 8M2011027 | RETAINER |
| 65 | 97-76214Q5 | ANODE KIT Comment: (These replacement parts are not included with complete gear housing replacement) |
| 66 | 97-822777Q1 | TRIM TAB Comment: (Anodic)(These replacement parts are not included with complete gear housing replacement)GEAR THESE REPLACEMENT PARTS ARE NOT INCLUDED WITH HOUSING REPLACEMENT |
| 67 | 10-8M0204686 | SCREW, (.437-14 x 1.750) Comment: (These replacement parts are not included with complete gear housing replacement) |
| 68 | 12-835467Q01 | THRUST HUB Comment: (These replacement parts are not included with complete gear housing replacement) |
| 69 | 13-423511 | LOCKWASHER, Toothed Comment: (These replacement parts are not included with complete gear housing replacement) |
| 70 | 12-31211Q03 | WASHER, Splined Comment: (These replacement parts are not included with complete gear housing replacement) |
| 71 | 14-816629Q | TAB WASHER Comment: (These replacement parts are not included with complete gear housing replacement) |
| 72 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (These replacement parts are not included with complete gear housing replacement) |
▶G./HSG, PROP-C/R-S/N-0G437999 & BELOW-1623-822442C2 CASTING (41 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-816575A5 | SEAL KIT, Gear Housing |
| 1 | 1623-822442A26 | GEAR HOUSING ASSEMBLY, Basic - Gray |
| 43 | 8M0226861 | SHIFT CRANK |
| 44 | 818349T1 | SPOOL KIT |
| 45 | 15-47397A1 | SHIM SET |
| 46 | 828830A2 | ADAPTOR ASSEMBLY, Bearing Comment: (1623-822442C3 CASTING) |
| 47 | 31-814653T | BEARING ASSEMBLY, Needle Rollers |
| 48 | 12-815481 | THRUST WASHER |
| 49 | 31-815480 | BEARING, Thrust |
| 50 | NSS | NOT SOLD SEPARATE Comment: (1.62:1 GEAR RATIO - 13/21) |
| 51 | 31-815482 | BEARING, Roller |
| 52 | 24-30893 | SPRING |
| 53 | 52-853594T | SLIDING CLUTCH |
| 54 | 17-8M0100263 | PIN, Cross |
| 55 | 17-78909 | PIN, Detent |
| 56 | 44-8M0140448 | PROPELLER SHAFT |
| 57 | 43-828289A3 | GEAR ASSEMBLY, Forward (INCLUDES PINION) Comment: (NOTE: THIS COMPLETE GEAR SET IS A 1.62:1 GEAR RATIO - 13/21 REPLACING A 1.64:1 GEAR RATIO - 17/28) |
| 58 | 23-1761526 | SPACER SHIM, (.230) |
| 59 | 31-15841 | BEARING, Roller |
| 60 | 12-17616 | THRUST RING |
| 61 | 818292A1 | ADAPTOR ASSEMBLY, Bearing |
| 62 | 31-814653T | BEARING ASSEMBLY, Needle Rollers |
| 63 | 12-18448 | THRUST WASHER |
| 64 | 31-15842 | BEARING, Thrust |
| 65 | 8182911 | RACE, Thrust |
| 66 | 814605 | KEEPER |
| 67 | 25-8M0214920 | O-RING |
| 68 | 818290T1 | CARRIER ASSEMBLY, Bearing |
| 69 | 31-30956T | BEARING, Needle |
| 70 | 26-14077 | SEAL, Oil (INSIDE) |
| 71 | 26-8M0204670 | SEAL (OUTSIDE) |
| 72 | 14-18323 | TAB WASHER |
| 73 | 8M2011027 | RETAINER |
| 74 | 97-76214Q5 | ANODE KIT Comment: (These replacement parts are not included with complete gear housing replacement) |
| 75 | 8227773 | TRIM TAB Comment: (Black Aluminum)(These replacement parts are not included with complete gear housing replacement) |
| 76 | 10-8M0204686 | SCREW, (.437-14 x 1.750) Comment: (These replacement parts are not included with complete gear housing replacement) |
| 77 | 12-835467Q01 | THRUST HUB Comment: (These replacement parts are not included with complete gear housing replacement) |
| 78 | 13-423511 | LOCKWASHER, Toothed Comment: (These replacement parts are not included with complete gear housing replacement) |
| 79 | 12-31211Q03 | WASHER, Splined Comment: (These replacement parts are not included with complete gear housing replacement) |
| 80 | 14-816629Q | TAB WASHER Comment: (These replacement parts are not included with complete gear housing replacement) |
| 81 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (These replacement parts are not included with complete gear housing replacement) |
▶G/HSG, DRIVE-STD/COUNTER-0G437999 AND BELOW-1623-822442C2 (43 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 817275A6 | REPAIR KIT, Water Pump |
| 1 | 1623-822442A26 | GEAR HOUSING ASSEMBLY, Basic - Gray |
| 2 | 17-379721 | PIN |
| 3 | 821526001 | FILLER BLOCK |
| 4 | 22-8M0058389 | FITTING KIT, Magnetic, Plug Fill/Drain |
| 5 | 12-191833 | WASHER, Fiber |
| 6 | 97-826134Q | ANODE |
| 7 | 10-4000333 | SCREW, (M6 x 40) |
| 8 | 11-401386 | NUT, (M6) |
| 9 | 31-42647A1 | BEARING ASSEMBLY, Roller |
| 10 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 11 | 10-79953Q04 | SCREW KIT, (.375-16 x .250) |
| 12 | 12-191833 | WASHER, Fiber |
| 13 | 22-85822A6 | CONNECTOR Comment: (XX-LONG) |
| 14 | NSS | NOT SOLD SEPARATE, Pinion Gear (Part of 43-812975A5) Comment: (1.64:1 GEAR RATIO - 17/28)(COUNTER ROTATION) |
| 15 | 12-92721 | WASHER |
| 16 | 11-35921 | NUT, (.625-18) |
| 17 | 23-815921A4 | BUSHING ASSEMBLY |
| 18 | 26-8M0204708 | SEAL, Oil |
| 19 | 25-8M0214927 | O-RING, (.799) |
| 20 | 10-1993716 | SCREW, (M6 x 16) |
| 21 | 12-77674 | WASHER |
| 22 | 824145 | SHIFT SHAFT (LOWER) |
| 23 | 45-8M0140442 | DRIVESHAFT (LOWER) |
| 24 | 28-8M0204723 | KEY |
| 25 | 15-42637A1 | SHIM SET |
| 26 | 31-8M0146566 | BEARING, Roller |
| 27 | 8245191 | RETAINER |
| 28 | 8M0214948 | CARRIER ASSEMBLY |
| 29 | 25-8M0142854 | O-RING, (2.175 x .175) |
| 30 | 26-16977 | SEAL, Oil |
| 31 | 26-89238 | SEAL, Oil |
| 32 | 817275A1 | PUMP ASSEMBLY, Water |
| 33 | 26-816575A2 | SEAL KIT |
| 34 | 27-430331 | GASKET |
| 35 | 27-8172771 | GASKET |
| 36 | 8M0204709 | FACEPLATE |
| 37 | 47-43026T2 | IMPELLER |
| 38 | 10-1993716 | SCREW, (M6 x 16) |
| 39 | 816597A1 | COUPLING ASSEMBLY |
| 40 | 25-8M0204645 | O-RING, (.796 x .139) |
| 41 | 45-824115A1 | EXTENSION KIT, Driveshaft Comment: (XX-LONG-30 IN.) 8 SPLINES |
| 42 | 823902 | COUPLING |
▶G/HSG, DRIVE-STD/COUNTER-0G438000 AND UP-1623-822442C3 (45 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 817275Q05 | REBUILD KIT, Water Pump |
| 1 | 1623-822442T79 | GEAR HOUSING ASSEMBLY Comment: (BASIC-WHITE) |
| 2 | 17-379721 | PIN |
| 3 | 821526001 | FILLER BLOCK |
| 4 | 22-8M0058389 | FITTING KIT, Magnetic, Plug Fill/Drain |
| 5 | 12-191833 | WASHER, Fiber |
| 6 | 97-826134Q | ANODE |
| 7 | 10-4000333 | SCREW, (M6 x 40) |
| 8 | 11-401386 | NUT, (M6) |
| 9 | 31-42647A1 | BEARING ASSEMBLY, Roller |
| 10 | 17-43044 | PIN, Dowel - Without Hole (.375 x .625) |
| 11 | 10-79953Q04 | SCREW KIT, (.375-16 x .250) |
| 12 | 12-191833 | WASHER, Fiber |
| 13 | 22-85822A6 | CONNECTOR Comment: (XXL) |
| 14 | 56762 | TIE STRAP, (4.00 Inches) |
| 15 | NSS | NOT SOLD SEPARATE, Pinion Gear (PART OF 43-828170A2) Comment: (1.87:1 - 15/28) |
| 16 | 12-92721 | WASHER |
| 17 | 11-35921 | NUT, (.625-18) |
| 18 | 23-815921A4 | BUSHING ASSEMBLY |
| 19 | 26-8M0204708 | SEAL, Oil |
| 20 | 25-8M0214927 | O-RING, (.799) |
| 21 | 10-1993716 | SCREW, (M6 x 16) |
| 22 | 12-77674 | WASHER |
| 23 | 824145 | SHIFT SHAFT (LOWER) |
| 24 | 45-8M0140442 | DRIVESHAFT (LOWER) |
| 25 | 28-8M0204723 | KEY |
| 26 | 15-42637A1 | SHIM SET |
| 27 | 31-8M0146566 | BEARING, Roller |
| 28 | 8245191 | RETAINER |
| 29 | 8M0214948 | CARRIER ASSEMBLY |
| 30 | 25-8M0142854 | O-RING, (2.175 x .175) |
| 31 | 26-8M0214939 | SEAL, Oil |
| 32 | 26-8M0214939 | SEAL, Oil |
| 33 | 817275A1 | PUMP ASSEMBLY, Water |
| 34 | 26-816575A2 | SEAL KIT |
| 35 | 27-430331 | GASKET |
| 36 | 27-8172771 | GASKET |
| 37 | 8M0204709 | FACEPLATE |
| 38 | 47-43026T2 | IMPELLER |
| 39 | 10-1993716 | SCREW, (M6 x 16) |
| 40 | 832942A1 | COUPLING ASSEMBLY |
| 41 | 25-8M0204645 | O-RING, (.796 x .139) |
| 42 | 25-8M0204654 | O-RING, (1.046) |
| 43 | 45-826353A1 | EXTENSION KIT, Driveshaft Comment: (XX-LONG-30 IN.) |
| 44 | 823902 | COUPLING |
▶G/HSG, PROP-COUNTER-G438000 AND UP-1623-822442C3 (40 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-816575A4 | SEAL KIT, Gear Housing |
| 1 | 1623-822442T79 | GEAR HOUSING ASSEMBLY Comment: (BASIC-WHITE) |
| 45 | 8M0226861 | SHIFT CRANK |
| 46 | 8M0235940 | SPOOL ASSEMBLY |
| 47 | 15-44491A1 | SHIM SET |
| 48 | 828830A2 | ADAPTOR ASSEMBLY, Bearing |
| 49 | 31-814653T | BEARING ASSEMBLY, Needle Rollers |
| 50 | 12-815481 | THRUST WASHER |
| 51 | 31-815480 | BEARING, Thrust |
| 52 | 43-828696T2 | GEAR ASSEMBLY, Reverse |
| 53 | 31-15844 | BEARING ASSEMBLY, Roller |
| 54 | 24-30893 | SPRING |
| 55 | 52-859340T | SLIDING CLUTCH |
| 56 | 17-8M0100263 | PIN, Cross |
| 57 | 17-828356 | PIN, Detent |
| 58 | 44-8M0140448 | PROPELLER SHAFT |
| 59 | 43-828695A1 | GEAR SET, Forward/Pinion (12/21) (INCLUDES PINION) |
| 60 | 23-1761526 | SPACER SHIM, (.230) |
| 61 | 31-815480 | BEARING, Thrust |
| 62 | 12-815481 | THRUST WASHER |
| 63 | 828831A3 | ADAPTOR ASSEMBLY, Bearing |
| 64 | 31-814653T | BEARING ASSEMBLY, Needle Rollers |
| 65 | 12-18448 | THRUST WASHER |
| 66 | 31-15842 | BEARING, Thrust |
| 67 | 8182911 | RACE, Thrust |
| 68 | 814605 | KEEPER |
| 69 | 25-8M0214920 | O-RING |
| 70 | 818290T8 | CARRIER ASSEMBLY, Bearing |
| 71 | 31-30956T | BEARING, Needle |
| 72 | 26-14077 | SEAL, Oil (INSIDE) |
| 73 | 26-8M0204670 | SEAL (OUTSIDE) |
| 74 | 14-18323 | TAB WASHER |
| 75 | 8M2011027 | RETAINER |
| 76 | 97-76214Q5 | ANODE KIT Comment: (These replacement parts are not included with complete gear housing replacement) |
| 77 | 10-8M0204686 | SCREW, (.437-14 x 1.750) Comment: (These replacement parts are not included with complete gear housing replacement) |
| 78 | 12-835467Q01 | THRUST HUB Comment: (These replacement parts are not included with complete gear housing replacement) |
| 79 | 13-423511 | LOCKWASHER, Toothed Comment: (These replacement parts are not included with complete gear housing replacement) |
| 80 | 12-31211Q03 | WASHER, Splined Comment: (These replacement parts are not included with complete gear housing replacement) |
| 81 | 14-816629Q | TAB WASHER Comment: (These replacement parts are not included with complete gear housing replacement) |
| 82 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (These replacement parts are not included with complete gear housing replacement) |
▶G/HSG, PROP-STD-0G438000 AND UP-1623-822442C3 (31 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 26-816575A4 | SEAL KIT, Gear Housing |
| 1 | 1623-822442T79 | GEAR HOUSING ASSEMBLY Comment: (BASIC-WHITE) |
| 45 | 8M0226861 | SHIFT CRANK |
| 46 | 8M0235940 | SPOOL ASSEMBLY |
| 47 | 15-44491A1 | SHIM SET |
| 48 | 43-878611A2 | GEAR SET, Forward And Pinion (INCLUDES PINION GEAR) Comment: (1.87:1 - 15/28) |
| 49 | 31-30894A1 | BEARING SET, Cup And Cone |
| 50 | 31-30895T | BEARING, Needle |
| 51 | 24-30893 | SPRING |
| 52 | 52-859340T | SLIDING CLUTCH |
| 53 | 17-828356 | PIN, Detent |
| 54 | 17-8M0100263 | PIN, Cross |
| 55 | 44-8M0140440 | PROPELLER SHAFT |
| 56 | 43-828171A1 | GEAR, Reverse Comment: (1.87:1 - 15/28) |
| 57 | 23-824108 | SPACER |
| 58 | 681001 | RING, Thrust |
| 59 | 30-88957T | BEARING ASSEMBLY, Ball |
| 60 | 25-8M0214920 | O-RING |
| 61 | 818763T11 | CARRIER ASSEMBLY, Bearing |
| 62 | 31-30956T | BEARING, Needle |
| 63 | 26-14077 | SEAL, Oil (INSIDE) |
| 64 | 26-8M0204670 | SEAL (OUTSIDE) |
| 65 | 14-18323 | TAB WASHER |
| 66 | 8M2011027 | RETAINER |
| 67 | 97-76214Q5 | ANODE KIT Comment: (These replacement parts are not included with complete gear housing replacement) |
| 68 | 10-8M0204686 | SCREW, (.437-14 x 1.750) Comment: (These replacement parts are not included with complete gear housing replacement) |
| 69 | 12-835467Q01 | THRUST HUB Comment: (These replacement parts are not included with complete gear housing replacement) |
| 70 | 13-423511 | LOCKWASHER, Toothed Comment: (These replacement parts are not included with complete gear housing replacement) |
| 71 | 12-31211Q03 | WASHER, Splined Comment: (These replacement parts are not included with complete gear housing replacement) |
| 72 | 14-816629Q | TAB WASHER Comment: (These replacement parts are not included with complete gear housing replacement) |
| 73 | 11-52707Q1 | PROP NUT KIT, (.750-16) Comment: (These replacement parts are not included with complete gear housing replacement) |
▶GEAR HOUSING CHART(S/N-0G129221 & BELOW) (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 1623-822442A37 | GEAR HOUSING ASSEMBLY Comment: (GRAY-XXL) 1.75:1 GEAR RATIO 8 DRIVESHAFT SPLINES COUNTER ROTATION |
▶GEAR HOUSING CHART(S/N-0G129222 THRU 0G437999) (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 45-826353A1 | EXTENSION KIT, Driveshaft Comment: (XX-LONG-30 IN.) 13 SPLINES |
▶GEAR HOUSING CHART(S/N-0G438000 & UP) (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 45-826353A1 | EXTENSION KIT, Driveshaft Comment: (XX-LONG-30 IN.) 13 SPLINES |
▶INSTRUMENTATION (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 87-19674A1 | SWITCH ASSEMBLY, Lanyard |
| 2 | 10-18303 | SCREW, (.190-16 x 1.750) Stainless Steel |
| 3 | 813679 | ADAPTER |
| 4 | 15920Q54 | LANYARD ASSEMBLY |
| 5 | 10-32866 | SCREW, (#10-32 x 2.00) Stainless Steel |
| 6 | 18321 | CLAMP, Mounting |
| 7 | 12-24676 | WASHER, (.200 x .440 x .032) |
| 8 | 10-32,11-68219 | NUT, Stainless Steel |
| 9 | 79146 | RETAINER |
| 10 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 11 | 812497A2 | DIODE ASSEMBLY |
| 12 | 84-11149A2 | CABLE ASSEMBLY, (6.00 Inches) |
| 13 | 79-859697A1 | TWO WARNING GAUGE |
| 14 | 823486 | CLAMP |
| 15 | 817315 | BEZEL |
| 16 | 8-32,11-26419 | NUT, Brass |
| 17 | 88-15163 | LAMP (UPPER) |
| 18 | 88-79888 | SOCKET, Light Bulb |
| 19 | 84-824372A1 | CABLE ASSEMBLY |
▶MISCELLANEOUS INFORMATION (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 0 | 90-10128980 | OWNERS MANUAL |
▶OIL INJECTION COMPONENTS (32 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1270-818456A1 | TANK ASSEMBLY, Oil Comment: SN# 0G437999 & Below |
| 2 | 1270-830889A1 | TANK ASSEMBLY, Oil Comment: SN# 0G438000 & Up |
| 3 | 23-8260841 | SPACER |
| 4 | 10-58376 | SCREW, (.164-18 x .375) |
| 5 | 12-72761 | WASHER, (.203 x .562 x .060) Stainless Steel |
| 6 | 36-814449A3 | CAP ASSEMBLY Comment: SN# 0G438000 & Up |
| 7 | 27-42999T | GASKET |
| 8 | 87-12886A7 | SWITCH ASSEMBLY Comment: SN# 0G438000 & Up |
| 9 | 10-12896 | SCREW, (#8-18 x .310) Comment: (USE W/O SPACER - REF/ #3) |
| 10 | 23-19064 | BUSHING |
| 11 | 25-825380001 | GROMMET |
| 12 | 12-56720 | WASHER, (.330 x .750 x .060) Stainless Steel |
| 13 | 10-81893435 | SCREW, (M8 x 35) |
| 14 | 32-8M0108355 | HOSE, (57.00 Inches Bulk) (8 IN.) Comment: SN# 0G438000 & Up |
| 15 | 22-8M0207780 | FITTING |
| 16 | 10-82104530 | SCREW (30MM) |
| 17 | 815536T1 | PUMP, Oil |
| 18 | 25-11379 | O-RING |
| 19 | 25-48462 | O-RING, (.614 x .070) |
| 20 | 23-817631 | BEARING, Driven Gear |
| 21 | 43-430204 | GEAR, Driven |
| 22 | 816974 | BEARING, Thrust |
| 23 | 10-82104520 | SCREW, (M5 x 20) (20MM) |
| 24 | 54-816311T | TIE STRAP, (8.00 Inches) |
| 25 | 32-82381455 | TUBING (8-1/2 IN.) |
| 26 | 1257-87421 | TANK |
| 27 | 36-43298A2 | CAP ASSEMBLY |
| 28 | 25-11332 | O-RING, (2.225 x .210) |
| 29 | 816190A4 | HOUSING ASSEMBLY, Adapter |
| 30 | 25-11332 | O-RING, (2.225 x .210) |
| 31 | 32-99802 | TUBE |
| 32 | 32-99439 | HOSE, (114.00 Inches) |
▶POWER TRIM COMPONENTS (35 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 826729A10 | POWER TRIM ASSEMBLY Comment: SN# 0G217419 & Below |
| 1 | 811604F | MANIFOLD ASSEMBLY |
| 2 | 22-56800 | PLUG, Pipe (.0625-27) |
| 3 | 880952A03 | CYLINDER ASSEMBLY |
| 4 | 823553T | ROD KIT, Trim Piston |
| 5 | 878239A02 | GUIDE KIT |
| 6 | 811607A1 | REPAIR KIT |
| 7 | 811610A1 | CHECK VALVE KIT |
| 8 | 1100-8M0021648 | GUIDE ASSEMBLY |
| 9 | 878414T01 | PISTON/ROD ASSEMBLY, Power Trim (STBD.) |
| 10 | 35-12184A1 | TRIM FILTER ASSEMBLY |
| 11 | 893929A01 | MANUAL RELEASE ASSEMBLY |
| 12 | 53-815949001 | E RING |
| 13 | 811612A3 | O-RING KIT |
| 14 | 811617T1 | PUMP |
| 15 | 19-811613 | PLUG ASSEMBLY |
| 16 | 10-4000327 | SCREW, (M6 x 14) |
| 17 | 12-4002315 | WASHER |
| 18 | 811611 | COVER |
| 19 | 811619 | DRIVESHAFT Comment: SN# 0G217419 & Below |
| 20 | 878265A6 | RETROFIT KIT Comment: SN# 0G217419 & Below |
| 21 | 10-811616 | SCREW (SHORT) |
| 22 | 8M0142997 | SHAFT ASSEMBLY |
| 23 | 22-56800 | PLUG, Pipe (.0625-27) |
| 24 | 17-878267 | PIN, Groove |
| 25 | 17-821539 | PIN, Trilobe |
| 26 | 99625002 | SHAFT |
| 27 | 97-818298Q1 | ANODE KIT |
| 28 | 10-8M0204707 | SCREW, (M6 x 25) |
| 29 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 30 | 10-4000377 | SCREW, (M10 x 30) |
| 31 | 12-4002319 | WASHER |
| 32 | 54-26550 | CLAMP Comment: SN# 0G217420 & Up |
| 33 | 10-878609 | SCREW, (#10-16 x .600) |
| 34 | 8M0084613 | C WASHER |
▶POWER TRIM MOTOR (9 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 878265A4 | MOTOR ASSEMBLY Comment: SN# 0G217420 & Up |
| 1 | 811624 | FRAME AND FIELD KIT Comment: SN# 0G217419 & Below |
| 2 | 811625 | BRUSH CARD KIT Comment: SN# 0G217419 & Below |
| 3 | 811623 | END FRAME KIT Comment: SN# 0G217419 & Below |
| 4 | 811626 | SEAL KIT Comment: SN# 0G217419 & Below |
| 5 | 811627 | ARMATURE KIT Comment: SN# 0G217419 & Below |
| 6 | 828714A1 | BRUSH AND SEAL KIT Comment: SN# 0G217420 & Up |
| 7 | 828713T1 | ARMATURE KIT Comment: SN# 0G217420 & Up |
| 8 | 828715A1 | END FRAME (COMPLETE) Comment: SN# 0G217420 & Up |
▶REED BLOCK/SOUND ATTENUATOR (25 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 809793A00 | POWERHEAD ASSEMBLY Comment: (SEAPRO/MARATHON) |
| 1 | 8184441 | ATTENUATOR, Sound |
| 2 | 8215542 | PLATE, Sound Attenuator |
| 3 | 8266151 | SEAL |
| 4 | 10-82130020 | SCREW, (M6 x 20) |
| 5 | 8161842 | PLATE, Carburetor Adaptor Comment: SN# 0G303045 & Below |
| 6 | 54-67015 | CLAMP Comment: SN# 0G303045 & Below |
| 7 | 8161843 | PLATE, Carburetor Adaptor Comment: SN# 0G303046 & Up |
| 8 | 827507 | RETAINER Comment: SN# 0G303046 & Up |
| 9 | 16-8165712 | STUD (M6 X 29.50) |
| 10 | 10-82130025 | SCREW, (M6 x 25) |
| 11 | 27-8141951 | GASKET |
| 12 | 816032T1 | REED BLOCK Comment: SN# 0G338134 THRU 0G437999 |
| 13 | 34-816107A1 | REED SET Comment: SN# 0G338134 THRU 0G437999 |
| 14 | 34-816107A1 | REED SET Comment: SN# 0G338133 & Below |
| 15 | 8161082 | CLAMP, Reed Comment: SN# 0G338134 THRU 0G437999 |
| 16 | 10-8211108 | SCREW (M4 X .7) Comment: SN# 0G338134 THRU 0G437999 |
| 17 | 10-4007420 | SCREW, (M6 x 20) |
| 18 | 822520 | LATCH HANDLE |
| 19 | 10-48408 | SCREW, (#10-16 x .500) |
| 20 | 12-8M0204666 | WASHER, (.203 x .500 x .032) |
| 21 | 822527 | PAWL |
| 22 | 818446 | FLYWHEEL COVER |
| 23 | 25-8M0153609 | GROMMET |
| 24 | 37-855577A14 | DECAL, EPA Label Information Comment: (1998) |
▶STARTER MOTOR (17 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 50-898265009 | STARTER MOTOR ASSEMBLY |
| 2 | 8236392 | DRIVE CAP |
| 3 | 10-823641 | THRU BOLT |
| 4 | 823640T | DRIVE KIT |
| 5 | 13310T1 | DRIVE |
| 6 | 823638 | ARMATURE |
| 7 | 898265016 | BRUSH/SPRING KIT |
| 8 | 898265014 | HOLDER |
| 9 | 8119011 | CAP, Commutator |
| 10 | F15158 | SCREW |
| 11 | 37-8272822 | DECAL, Warning |
| 12 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 13 | 11-94330 | NUT, (.250-20) Brass |
| 14 | 13-26992 | LOCKWASHER, (.250) Stainless Steel |
| 15 | 11-20890 | NUT, (.250-20) |
| 16 | 10-81893450 | SCREW, (M8 x 50) |
| 17 | 23-824921 | SPACER |
▶STEERING ATTACHING KIT (12 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 92876A8 | ATTACHING KIT, Steering (SINGLE) |
| 1 | 41055A1 | BRACKET ASSEMBLY |
| 2 | 71565A2 | TUBE ASSEMBLY |
| 3 | 25-48462 | O-RING, (.614 x .070) |
| 4 | 13-821203 | LOCKWASHER |
| 5 | 11-8M0041651 | NUT, (.875-14) |
| 6 | 10-38601 | SCREW, (.250-28 x 1.250) |
| 7 | 13-78968 | LOCKWASHER, Internal (.250) |
| 8 | 850791T | COUPLING |
| 9 | 10-73732 | SCREW, (.375-24 x 1.120) |
| 10 | 12-34931 | WASHER, (.406 x .734 x .063) Stainless Steel |
| 11 | 11-8M0204726 | NUT, (.375-24) |
▶SWIVEL BRACKET AND STEERING ARM (31 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 1499-8710A23 | SWIVEL BRACKET Comment: (WHITE) |
| 2 | 25-8M0214926 | O-RING |
| 3 | 23-818764 | BUSHING |
| 4 | 23-816039 | SPACER |
| 5 | 26-87735 | SEAL, Oil (LOWER) |
| 6 | 22-8M0169589 | FITTING, Grease |
| 7 | 23-821207 | BUSHING |
| 8 | 12-816432 | THRUST WASHER |
| 9 | 826364F3 | YOKE, Bottom Comment: (WHITE-XL/XXL-STAINLESS STEEL) |
| 10 | 53-67684 | RING, Retaining |
| 11 | 8M0045383 | STRIKER PLATE |
| 12 | 13-58643 | LOCKWASHER, (.375) |
| 13 | 11-46335 | NUT, (.375-24) |
| 14 | 10-64014 | SCREW, (.250-28 x .500) |
| 15 | 8M0074846 | SENDER ASSEMBLY, Trim |
| 16 | 10-852368 | SCREW, (#10-24 x .750) |
| 17 | 10,13-26996 | LOCKWASHER, Stainless Steel |
| 18 | 12-89302 | WASHER, (.203 x .406 x .040) |
| 19 | 17-8M0132731 | SWIVEL PIN ASSEMBLY Comment: (WHITE-XL/XXL) |
| 20 | 10-8M0141069 | SCREW, (M12 x 190) |
| 21 | 824998001 | BUMPER |
| 22 | 8163851 | MOUNT, Upper |
| 23 | 12-8154371 | WASHER |
| 24 | 12-815436 | WASHER |
| 25 | 11-896963 | NUT, (M12) |
| 26 | 8M0036783 | CLAMP |
| 27 | 10-81893435 | SCREW, (M8 x 35) |
| 28 | 92876A12 | LINK ASSEMBLY, Steering |
| 29 | 10-849838 | SCREW, (.375-24 x 1.25) |
| 30 | 11-8M0204726 | NUT, (.375-24) |
| 31 | 12-37828 | WASHER, (.390 x .625 x .062) Stainless Steel |
▶TOOLS, SPECIAL (1 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| - | 91-821571A1 | GUIDE TOOL, Water Pump Alignment Pins Comment: GEAR HOUSING |
▶TOP COWL (19 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 4001-814277T25 | TOP COWL ASSEMBLY Comment: (WHITE) |
| 2 | 821256F6 | INLET, Air Comment: (WHITE) |
| 3 | 10-82130016 | SCREW, (M6 x 16) |
| 4 | 821250A1 | SOUND BLANKET KIT |
| 5 | 10-83002430 | SCREW (M6 X 30) Comment: SEAPRO/MARATHON |
| 6 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel Comment: SEAPRO/MARATHON |
| 7 | 19-823865 | CAP PLUG |
| 8 | 821248 | REAR LATCH HOOK |
| 9 | 53-8237951 | RING, Retaining |
| 10 | 8M0207770 | ROLLER |
| 11 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 12 | 11-401196 | NUT, (M6) |
| 13 | 8M0036792 | BRACKET, Front |
| 14 | 815477 | BUMPER, Latch |
| 15 | 8155381 | PIN, Roll |
| 16 | 11-401196 | NUT, (M6) |
| 17 | 12-8M0204649 | WASHER, (.281 x .500 x .060) Stainless Steel |
| 18 | 826639T | COVER |
| 19 | 47341A11 | ROPE AND HANDLE KIT |
▶TRANSOM BRACKETS(S/N-0G589999 AND BELOW) (23 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3401-8718F11 | BRACKET, Transom Comment: (STBD-WHITE) |
| 2 | 3400-8716A11 | BRACKET ASSEMBLY, Transom Comment: (PORT-WHITE) |
| 3 | 22-8M0169588 | FITTING, Grease (PORT) |
| 4 | 826125A1 | TILT TUBE |
| 5 | 11-826135 | NUT, (1.00-14) Brass/Nickel Plate |
| 6 | 25-45711 | O-RING, (.612 x .103) |
| 7 | 13-88750 | WASHER |
| 8 | 11-826164 | NUT, (.875-14) |
| 9 | 10-96930A1 | BOLT ASSEMBLY |
| 10 | 11-23161 | NUT, (.375-24) |
| 11 | 88238A10 | CABLE ASSEMBLY, Ground |
| 12 | 10-41508 | SCREW, (.250-20 x .500) Stainless Steel |
| 13 | 10-8M0149747 | SCREW, (.500-20 x 4.500) |
| 14 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 15 | 11-91962 | NUT, (.500-20) |
| 16 | 8M0115104 | LEVER ASSEMBLY |
| 17 | 13-99611 | WAVE WASHER |
| 18 | 23-65830 | NYLINER |
| 19 | 814207 | STOP |
| 20 | 99633 | KNOB |
| 21 | 17-99615 | PIN, Groove |
| 22 | 24-99622 | SPRING |
| 23 | 17-99604 | PIN, Groove |
▶TRANSOM BRACKETS(S/N-0G590000 AND UP) (18 parts)
| Ref | OEM Part # | Part Name |
|---|---|---|
| 1 | 3426-828334T03 | BRACKET ASSEMBLY, Transom-Starboard |
| 2 | 3425-828333T08 | BRACKET ASSEMBLY, Transom-Port |
| 3 | 22-8M0169588 | FITTING, Grease (PORT) |
| 4 | 826125A1 | TILT TUBE |
| 5 | 11-826135 | NUT, (1.00-14) Brass/Nickel Plate |
| 6 | 25-45711 | O-RING, (.612 x .103) |
| 7 | 13-88750 | WASHER |
| 8 | 11-826164 | NUT, (.875-14) |
| 9 | 10-8M0149747 | SCREW, (.500-20 x 4.500) |
| 10 | 12-8M0204648 | WASHER, (1.5 x 3.05 x 0.13) Stainless Steel |
| 11 | 11-91962 | NUT, (.500-20) |
| 12 | 8M0115104 | LEVER ASSEMBLY |
| 13 | 24-830899 | SPRING, Tension |
| 14 | 23-65830 | NYLINER |
| 15 | 24-830900 | SPRING, Compression |
| 16 | 99633 | KNOB |
| 17 | 17-99615 | PIN, Groove |
| 18 | 17-893709 | PIN |
100-Hour / Annual Service Checklist
Regular maintenance keeps your Mercury 225 SEAPRO (3.0L CARB) running reliably season after season. Most of these tasks can be performed with basic tools and the factory service manual.
- Replace water pump impeller and inspect wear plate
- Change engine oil and oil filter (check drain plug washer)
- Replace spark plugs and check ignition timing
- Drain and refill lower unit gear oil; inspect for water contamination
- Inspect fuel lines, primer bulb, and fuel filter for deterioration
- Check and replace sacrificial anodes (zinc or aluminum)
- Inspect propeller for damage; check shaft seal and cotter pin
- Check valve clearance (refer to service manual for specifications)
- Lubricate all grease points (steering, tilt tube, shift linkage)
- Inspect control cables and throttle/shift linkage for smooth operation
- Pro Tip: Always flush the engine with fresh water after saltwater use — even a quick 10-minute flush significantly extends component life.
- Pro Tip: Use fuel stabilizer in the tank before winter storage, and fog the cylinders to prevent internal corrosion during extended periods of non-use.
Productos vistos recientemente
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
Example product title
- $19.99
- $19.99
- Unit price
- per
- Choosing a selection results in a full page refresh.