Atención al cliente: info@jlm-marine.com
Envío gratuito. Sin compra mínima.
Flexible Rubber Water Pump Impeller 6760-0001 – 9 Blade Neoprene 95 mm Spline – Fits Yanmar 125613-42762
- $69.60
- $69.60
- Unit price
- per
Couldn't load pickup availability
Envío gratis
Envío estándar gratuito en todos los pedidos inferiores a 1 kg.
Devoluciones sin preocupaciones
Aprende más.
How to Match This Part
This is a flexible rubber raw water pump impeller. It sits inside the pump housing behind the cover plate and is driven by a splined shaft. It replaces the primary original part number Jabsco 6760-0001, and is also supplied against JMP 8200-01, Johnson 09-802B, DJ 086-0901, Kashiyama SP-280 and Yanmar 125613-42762.
Match this part by checking your engine in this order:
1. Original impeller part number (stamped on the old impeller or listed in the pump section of your parts catalog)
2. Blade count (this listing is 9 blades)
3. Drive type (this listing is a 12-spline hub, 25 mm bore)
4. Width (this listing is about 89 mm wide, not the 63 mm 95 mm-diameter family)
Identify it physically before ordering. This impeller has nine vanes moulded in black neoprene around a machined brass 12-spline insert. JMP 8200-01 is 95 mm diameter, 88.8 mm width and 25 mm bore. An isometric product photo can look like ten vanes; JMP, Johnson 09-802B and DJ 086-0901 all specify nine. It is not interchangeable with 63 mm-wide 8000-01 / 8100-01 of the same diameter.
- ✓ Primary OEM: Jabsco 6760-0001
- ✓ Product form: 9-blade neoprene impeller, brass 12-spline insert, 88.8 mm width, 25 mm bore
- ✓ Fitment: part number, then blade count, then width
Part Number Cross-Reference
Use this table to confirm equivalent part numbers. JMP 8200-01K is a kit number. This listing is the impeller only.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| OEM | Jabsco Pump | 6760-0001 | Primary reference. 9-blade neoprene, 12-spline |
| OEM | SPX Flow Johnson Pumps | 09-802B | Johnson 9-blade equivalent |
| OEM | JMP Pump | 8200-01 | JMP 9-blade 12-spline equivalent |
| OEM | DJ Pump | 086-0901 | 9-blade spline equivalent |
| OEM | Kashiyama | SP-280 | Source-sheet Kashiyama number |
| OEM | Yanmar | 125613-42762 | Yanmar raw-water pump impeller |
| OEM | Perkins | 0460027 | Perkins raw-water pump impeller |
| Other brand | Industry interchange | K-173 | Source-sheet other-brand number |
| Other brand | Industry interchange | 888-173 | Source-sheet other-brand number for this SKU |
Compatible Engine Models
Confirm the original impeller number and count nine blades on a 25 mm 12-spline hub about 89 mm wide. Do not assume every Yanmar 6HYM or Perkins diesel uses this part.
| Brand | Engine / Pump Model | Original Part No. | Notes |
|---|---|---|---|
| Jabsco / Johnson / JMP / DJ / Kashiyama | Pumps specified for 6760-0001, 09-802B, 8200-01, 086-0901 or SP-280 | 6760-0001, 09-802B, 8200-01, 086-0901, SP-280 | 9-blade, 12-spline, 95 × 88.8 × 25 mm |
| Yanmar | Engines whose parts list calls for 125613-42762 | 125613-42762 | Match the original number rather than a 6HYM / 6KY family dump |
| Perkins | Engines whose parts list calls for 0460027 | 0460027 | Match the original number |
Technical Specifications
| Specification | Value |
|---|---|
| Part type | Flexible rubber impeller, raw water pump |
| Number of blades | 9 |
| Impeller diameter (A) | 95 mm |
| Impeller width / depth (B) | 88.8 mm |
| Shaft bore diameter (C) | 25 mm |
| Insert / drive type | 12-spline |
| Insert material | Machined brass |
| Vane material | Neoprene rubber |
Package Contents
This listing is for the impeller only, as shown in the impeller in the product images. Please refer to the part number cross-reference table to confirm component details.
Cover gasket, O-ring and lubricant are not included. JMP 8200-01K is a kit number that adds seals and lubricant; kit extras are not included.
Installation Guide
- 1 Stop the engine, let it cool, and close the raw water seacock so water cannot enter the boat while the pump is open.
- 2 Remove the cover plate screws and lift off the cover. Keep the screws and the old gasket together so you can compare the seal size when reassembling.
- 3 Note the spline orientation, then grip the brass insert and pull the old impeller straight off. Recover any broken vane pieces from the downstream cooling circuit before continuing.
- 4 Clean the housing bore and the wear plate, and inspect them for scoring. Apply a marine-grade impeller lubricant, glycerine or soapy water to the bore and the new vanes. Do not use petroleum-based grease, which attacks neoprene.
- 5 Align the spline in the brass insert with the pump shaft, then press the impeller in while turning the shaft in the normal direction of rotation so all nine vanes lay over the same way.
- 6 Refit the cover plate with a serviceable gasket, tighten the screws evenly in a crisscross pattern, open the seacock, then start the engine and confirm a solid stream of cooling water and no leaks at the cover.
Note: Professional installation is recommended to ensure safety and optimal performance.
Troubleshooting & FAQ
Important Notes
- Verify that the product images and specifications match your original part. If discrepancies exist, even if your model is listed, do not proceed with the purchase.
- This product is an aftermarket replacement part and is not an OEM component.
- The impeller is supplied on its own. Cover seals and lubricant must be ordered separately if your service procedure requires them.
- This is a 9-blade, 95 mm 12-spline impeller, 88.8 mm wide with a 25 mm bore. It will not fit 63 mm-wide 8000-01 / 8100-01 of the same diameter.
- Never run the pump dry. Even a few seconds without water will damage the neoprene vanes.
- Professional installation is recommended to ensure safety and optimal performance.
Why Choose JLM MARINE?
- Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
- Fast Global Shipping: Free delivery worldwide in 5–15 days.
- Direct from Manufacturer: Competitive pricing without compromising quality.
Podemos enviar a prácticamente cualquier dirección del mundo con envío gratuito disponible para la mayoría de las regiones.
Para nuestros clientes típicos de EE. UU. y Canadá , nuestros plazos de envío son los siguientes:
- Amazon FBA : los pedidos se entregarán dentro de 1-5 días hábiles después de realizar el pedido (durante ciertos períodos especiales como promociones importantes, Navidad, etc., el tiempo de entrega de Amazon FBA puede verse afectado).
- Envío al almacén de EE. UU .: los pedidos se entregarán dentro de los 7 días posteriores a la realización del pedido.
- Envío al almacén de China : los pedidos se entregarán aproximadamente 12 días después de realizar el pedido.
Al realizar un pedido, estimaremos las fechas de envío y entrega según la disponibilidad de sus artículos y las opciones de envío que elija. Dependiendo del proveedor de envío que elija, las fechas de envío estimadas podrían aparecer en la página de presupuestos de envío.
Tenga en cuenta también que las tarifas de envío de muchos de los artículos que vendemos se basan en el peso. Puede consultar el peso de cada artículo en su página de detalles. Para reflejar las políticas de las empresas de envío que utilizamos, todos los pesos se redondearán a la libra superior.
Fundada en 2002, JLM Marine se ha consolidado como un fabricante dedicado de piezas marinas de alta calidad, con sede en China. Nuestro compromiso con la excelencia en la fabricación nos ha ganado la confianza de las principales marcas marinas a nivel mundial.
Como proveedor directo, evitamos intermediarios, lo que nos permite ofrecer precios competitivos sin comprometer la calidad. Este enfoque no solo promueve la rentabilidad, sino que también garantiza que nuestros clientes reciban el mejor valor directamente del proveedor.
Estamos entusiasmados de ampliar nuestro alcance a través de canales minoristas, llevando nuestra experiencia y compromiso con la calidad directamente a los propietarios de embarcaciones y entusiastas de todo el mundo.
Parts Finder
Use our Parts Finder to quickly locate the correct parts for your engine. Search by Make, HP, Stroke, Model, Year, and SN.
Select only the fields available — you don’t need to fill all options (e.g., leave Year blank if not applicable).
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
Our database is currently being updated and expanded. More models, including Yamaha, Mercury, and Suzuki, are being verified and uploaded.
- Choosing a selection results in a full page refresh.