MerCruiser Bravo Two Engine Drive Blue Rams Decal Sticker Set – Fits MerCruiser Bravo Two Models (Replaces 37-13722A90)

MerCruiser Bravo Two Engine Drive Blue Rams Decal Sticker Set – Fits MerCruiser Bravo Two Models (Replaces 37-13722A90)

The MerCruiser Bravo Two Engine Drive Blue Rams Decal Sticker Set is a premium aftermarket replacement for the discontinued Mercury Marine part number 37-13722A90. This marine engine decal sticker kit provides essential identification and regulatory compliance labeling for MerCruiser Bravo Two sterndrive engines.

Designed specifically for boat owners and marine technicians who need to replace faded, damaged, or missing decals on their MerCruiser Bravo Two drive units, this high-quality vinyl decal set ensures your engine maintains its professional appearance while meeting emission label compliance requirements.

• Installation Method: Simple peel-and-stick application.
• Material: Manufactured from high-quality marine-grade vinyl with a clear protective laminate.
• Engine Compatibility: Fits MerCruiser Bravo Two sterndrive engines manufactured between 1986 and 1998.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

Compatible Serial Number Ranges:

• BRAVO TWO - 0B664190 THRU 0F729999 (approx. 1986-1995)
• BRAVO TWO - 0F730000 THRU 0M100000 (approx. 1996-1998)

Technical Specifications

Package Contents

• 1 x Complete Decal Set (37-13722A90 Replacement)
• Main "MERCURY" engine cover decal
• "MerCruiser" brand identification decal
• Blue Rams performance graphics (left and right)
• Bravo Two drive unit identification labels
• Regulatory compliance and emission labels
• Installation instruction sheet

Installation Guide

Proper installation requires attention to detail. Skill Level: Beginner to Intermediate.

1. Surface Preparation: Thoroughly clean the engine surfaces where decals will be applied. Use isopropyl alcohol to remove all oil, dirt, and old adhesive residue.
2. Temperature Check: Ensure the ambient temperature is between 15°C and 30°C (59°F to 86°F) for the best adhesive performance.
3. Positioning: Carefully position each decal according to the original placement. Use existing mounting points or clean areas for reference.
4. Application: Peel the backing paper off gradually while smoothing the decal from the center outward. This helps eliminate air bubbles.
5. Final Pressing: Use a plastic squeegee or credit card to firmly press the decal onto the surface. Pay special attention to all edges and corners to ensure complete adhesion.

Troubleshooting & FAQ

Q: How do I make sure these decals will fit my MerCruiser drive?
A: Start by checking the compatible engine models table; this set is designed for MerCruiser Bravo Two models from 1986-1998. The most reliable method is to match your drive's serial number to the compatible ranges listed on this page. You can typically find your serial number on a metal plate attached to the engine block or on the flame arrester cover.

Q: Are these decals the same as the original Mercury ones?
A: These are high-quality aftermarket replacements, not OEM parts. They are manufactured to match the original OEM specifications for size, color, and materials, including marine-grade vinyl with a protective laminate. The original Mercury part (37-13722A90) has been discontinued and is no longer available from the manufacturer.

Q: What should I do if I see air bubbles after applying a decal?
A: Small bubbles can be removed easily. Carefully prick the center of the bubble with a fine needle or the tip of a utility knife, then gently smooth the trapped air out toward the tiny hole.

Q: What is the best way to prepare the surface for installation?
A: Proper surface preparation is critical for strong adhesion. Thoroughly clean the application area with isopropyl alcohol (70% or higher) and a clean, lint-free cloth to remove all traces of wax, oil, dirt, and old adhesive. Ensure the surface is completely dry before application.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.