Water Pump Impeller Repair Kit – Fits Suzuki DF200/225/250 4-Stroke Outboards (Replaces 17400-93J02, 17400-93J04, 17400-93J05)

Water Pump Impeller Repair Kit – Fits Suzuki DF200/225/250 4-Stroke Outboards

This water pump impeller repair kit is designed for Suzuki 4-stroke outboard engines from 200–250 HP, model years 2004 to current (non "A" models). It provides a reliable solution for maintaining your engine's cooling system for optimal performance and longevity.

This kit serves as a direct replacement for Suzuki part numbers 17400-93J02, 17400-93J03, 17400-93J04, and 17400-93J05. It also cross-references to aftermarket parts including Sierra 18-3264, 18-3264-1, and BRP/OMC 5035036.

• Includes all necessary components—impeller, plate, gasket, key, and seal—for a complete water pump service.
• Specifically designed for raw water cooling systems in Suzuki outboard lower units.
• Engineered to meet OEM specifications using high-quality materials for dependable cooling performance.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

For Johnson/Evinrude owners, here’s a guide to help you identify your engine’s serial/model: Johnson/Evinrude Serial Number Guide.

Suzuki

Evinrude Johnson OMC BRP

Technical Specifications

Package Contents

• 1 x Water Pump Impeller (17461-93J00, Sierra 18-3035, Mallory 9-45507)
• 1 x Impeller Plate (17471-93J02)
• 1 x Water Pump Plate Gasket (17472-93J00, Sierra 18-0778)
• 1 x Impeller Key (09420-05006/09420-05009, Sierra 18-3291)
• 1 x Water Pump Seal Ring (17416-93J00)

Installation Guide

Disclaimer: Professional installation is highly recommended. These steps are a general guide and may not match your specific engine. Always consult your owner's service manual before performing maintenance.

1. Disconnect the negative battery cable. Drain the gearcase lube from the lower unit.
2. Remove the bolts securing the lower unit (gearcase) to the engine's midsection and carefully lower it.
3. Unbolt and remove the water pump housing to expose the impeller.
4. Slide the old impeller off the driveshaft. Remove the old wear plate, gasket, and key.
5. Thoroughly clean the housing interior and all mating surfaces.
6. Install the new gasket and impeller plate onto the lower unit.
7. Install the new impeller key into the driveshaft.
8. Lightly lubricate the new impeller with grease and slide it onto the driveshaft, turning the shaft clockwise to seat the vanes correctly inside the housing.
9. Reinstall the water pump housing and tighten the bolts to the torque specified in your service manual.
10. Reattach the lower unit to the engine midsection and tighten the mounting bolts.
11. Refill the gearcase with the correct type and amount of lube.
12. Reconnect the battery, supply water to the engine using flushing muffs, and run it briefly to check for proper water circulation from the tell-tale outlet.

Troubleshooting & FAQ

Q: How do I confirm this kit fits my Suzuki engine?
A: Please check the compatibility table provided. This kit fits Suzuki DF200, DF225, and DF250 models from 2004-onward. It is critical to note that it is for non-"A" models only. The surest method is to cross-reference the OEM part number from your existing pump or service manual with the numbers listed.

Q: What are the signs of a failing water pump impeller?
A: Common symptoms include the engine overheating alarm sounding, a weak or non-existent water stream from the "tell-tale" outlet, or a visible rise in engine temperature on your gauge. Any of these signs warrant an immediate inspection.

Q: How often should the water pump impeller be replaced?
A: As a preventative maintenance item, we recommend inspecting the impeller annually and replacing it every 1-2 years or every 100-200 hours of use. Service intervals should be shorter in saltwater or silty/sandy conditions.

Q: The listing mentions Evinrude/Johnson compatibility. What models does it fit?
A: This kit cross-references to BRP/OMC part number 5035036, which is used on some 2004 and newer 200-250 HP models. However, as detailed model compatibility data is not available, you must verify the required OEM part number for your specific engine before ordering.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.