Yamaha 90HP Four Stroke Outboard Engine Decals Sticker Set - Premium Reproduction Graphics

Yamaha 90HP Four Stroke Outboard Engine Decals Sticker Set - Premium Reproduction Graphics for F90 & VF90 Models

This premium reproduction decal set is designed for Yamaha 90HP four-stroke outboard engines, including the popular F90 Midrange and VF90 V MAX SHO models. Transform your outboard with OEM-quality graphics at an affordable price, restoring its original appearance while providing superior protection against harsh marine environments.

This comprehensive sticker kit is precision-cut to match factory specifications and manufactured using marine-grade materials for long-lasting performance.

• Includes six essential graphics pieces for a full cowling restoration.
• Constructed from high-quality marine-grade PVC foil with UV-resistant inks and a protective laminate shield.
• Features a high-tack adhesive backing for a straightforward peel-and-stick application.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Important Note: While this decal set is optimized for current four-stroke models, some graphics may also fit select discontinued two-stroke 90HP models from the 1990s-2000s era. We recommend verification for older engines due to potential cowling design variations.

Technical Specifications

Package Contents

This set includes six essential decal pieces to restore your cowling:

• 1x Yamaha Logo Decal (Front Side): Primary brand identification graphic for the front cowling section
• 1x 90 HP Decal (Front Side): Power rating identification for front visibility
• 1x 90 HP Decal (Behind Side): Rear power rating for complete identification
• 1x Yamaha Decal (Rear Side): Rear brand identification and model information
• 1x Yamaha Decal (Starboard Side): Right side brand graphics for lateral identification
• 1x Yamaha Decal (Port Side): Left side brand graphics for complete coverage

Installation Guide

Required Tools: Clean microfiber cloths, Isopropyl alcohol (70% or higher), a plastic squeegee, a spray bottle with a soapy water solution, and a hair dryer or heat gun (optional).

1. Surface Preparation: Thoroughly clean the cowling surface using isopropyl alcohol to remove all dirt, grease, and residue. Allow the surface to dry completely.
2. Temperature: Install decals when the ambient temperature is between 60-80°F (15-27°C) for optimal adhesive performance.
3. Positioning: For large decals, use the wet application method. Lightly spray the surface with a soapy water solution to allow for repositioning before the adhesive sets.
4. Application: Partially peel the backing paper and carefully position the decal. Working from one edge, gradually remove the rest of the backing while smoothing the decal with a squeegee to push out water and air bubbles.
5. Smoothing: Use firm, overlapping strokes with the squeegee to ensure complete adhesion, paying special attention to edges and curved areas.
6. Heat Activation: To enhance adhesion on curves, gently apply heat with a hair dryer or heat gun to activate the adhesive and help the material conform.

Troubleshooting & FAQ

How do I confirm this fits my engine?
To ensure compatibility, check your model against the list above and verify your engine's serial number. This decal set is engineered for Yamaha 90HP four-stroke models from 2009-present (F90 and VF90 series). While it may fit some older two-stroke engines, we recommend verifying your cowling design for older models.

What is the best way to apply the decals?
For best results, apply in temperatures between 60-80°F (15-27°C) on a thoroughly cleaned surface. Using a wet application method (soapy water in a spray bottle) allows for easier positioning of larger decals. Use a squeegee to remove air and water, and apply gentle heat to secure the edges on curved surfaces.

How long do these decals last and how do I care for them?
The decals are designed to last 5-7 years in typical marine environments. They are made from UV-resistant and waterproof materials. To maintain them, clean regularly with mild soap and water and inspect them annually for any edge lifting.

What should I do if I get air bubbles during installation?
Small bubbles often disappear on their own within 24-48 hours as the vinyl "breathes". For larger bubbles, you can carefully prick them with a fine needle and smooth the decal down with your squeegee.

OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.