Carburetor Repair Kit – Fits Yamaha 4HP/5HP Outboards (Replaces 6E0-W0093-01-00)

Carburetor Repair Kit – Fits Yamaha 4HP/5HP Outboards (Replaces 6E0-W0093-01-00)

This comprehensive carburetor repair kit is designed for Yamaha 4HP and 5HP two-stroke outboard engines manufactured from 1994 to 2002. It provides the essential components needed to rebuild your carburetor, restoring engine performance and reliability.

This kit contains all necessary gaskets, O-rings, float, needle valve, and other hardware for a complete overhaul of the carburetor assembly, addressing common issues like fuel leaks, poor idling, or difficulty starting.

• Direct Replacement: Replaces Yamaha part numbers 6E0-W0093-00-00, 6E0-W0093-01-00, 6E0-W0093-02-00, 6E0-W0093-03-00, and 6E0-W0093-04-00.
• Carburetor Compatibility: For use with original Yamaha carburetors 6E3-14301-01 to 6E3-14301-05 and 6E0-14301-00 to 6E0-14301-05.
• Installation: Suitable for both DIY enthusiasts and professional marine mechanics.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. This aftermarket kit is a direct replacement for the following OEM part numbers.

Compatible Engine Models

Confirm your engine model/year in the table below. For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Gasket (6E0-14198-A0-00)
• 1 x Gasket, Float Chamber (6E0-14384-00-00)
• 1 x Screw, Panhead (97803-04016)
• 1 x Gasket (6A1-14398-00-00)
• 1 x Float (6E7-14385-00-00)
• 1 x Pin, Float (647-14386-10-00)
• 1 x Needle Valve (6G8-14392-10-00)
• 1 x Washer (6E0-14227-00-00)
• 1 x Screw, Air Adjusting (647-14323-00-00)
• 1 x Diaphragm (6E0-24471-00-00)
• 1 x Diaphragm (6E0-24411-00-00)

Installation Guide

1. Safety First: Disconnect the battery and ensure the engine is cool. Work in a well-ventilated area away from open flames.
2. Remove Carburetor: Carefully disconnect the fuel lines, throttle linkage, and any other connections. Unbolt and remove the carburetor from the engine.
3. Disassemble: Place the carburetor on a clean workbench. Systematically disassemble it, paying close attention to the order and orientation of each part. Taking photos can help.
4. Clean Components: Thoroughly clean all non-replaceable metal parts with a quality carburetor cleaner to remove varnish, grime, and deposits. Do not use cleaner on rubber or plastic parts.
5. Install New Parts: Carefully replace the old gaskets, seals, float, and needle valve with the new components from this kit. Ensure each part is seated correctly.
6. Reassemble: Reassemble the carburetor in the reverse order of disassembly. Do not overtighten screws.
7. Reinstall and Test: Mount the reassembled carburetor back onto the engine, reconnecting all lines and linkages. Start the engine and adjust the idle and mixture screws according to your service manual's specifications.

Troubleshooting & FAQ

Q: How do I know if this kit fits my Yamaha engine?
A: First, check the "Compatible Engine Models" table to see if your model and year are listed. This kit is specifically for Yamaha 4HP and 5HP 2-stroke models from 1994-2002. It is designed to work with original Yamaha carburetors with model numbers 6E3-14301-01 to -05 and 6E0-14301-00 to -05.

Q: What are the signs my carburetor needs to be rebuilt?
A: Common symptoms include the engine being hard to start, stalling at low speeds, idling roughly, bogging down on acceleration, or visible fuel leaks from the carburetor body. A rebuild can often solve these issues.

Q: What is the main difference between the various 6E0-W0093-XX kit versions?
A: The primary differences across the various official Yamaha kit versions (e.g., -01, -02, -03) are minor component variations and sometimes a different float type. This aftermarket kit is designed to cover all these versions, providing a universal solution for the specified engine models.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.