Water Pump Impeller Kit – Fits Honda 8/9.9 HP Outboards (Replaces 06192-ZW9-000)

Water Pump Impeller Kit – Fits Honda 8/9.9 HP Outboards (Replaces 06192-ZW9-000)

This comprehensive water pump impeller service kit is designed for Honda 4-Stroke 8 HP, 9.9 HP, and 10 HP outboard engines, specifically covering 2002–2006 model years. It fits BF8D, BF9.9D, BFP8D, BFP9.9D, BF10D, and BFP10D variants, providing a reliable solution for maintaining your engine’s cooling system.

This kit is a direct replacement for Honda part number 06192-ZW9-000 and Sierra part number 18-3493, ensuring precise fitment and performance.

• Engineered for direct OEM fitment for a straightforward installation.
• Complete service kit includes the impeller, gasket, key, and O-ring needed for a full replacement.
• Restores cooling performance to prevent engine overheating and ensure reliability.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 x Water Pump Impeller (19210-ZW9-013)
• 1 x Impeller Key (90752-ZW9-000)
• 1 x Gasket (19232-ZW9-000)
• 1 x O-ring (91301-ZG3-000)

Explosion Diagram

Installation Guide

1. Disconnect the spark plug leads and shift the outboard into neutral.
2. Place a drain pan under the lower unit and remove the gear case drain and vent screws to drain the oil.
3. Remove the bolts securing the lower unit (gear case) to the midsection.
4. Carefully lower and separate the gear case from the driveshaft housing.
5. Unscrew the bolts on top of the water pump housing and lift it off.
6. Remove the old impeller, gasket, wear plate, and key from the driveshaft.
7. Clean all mating surfaces thoroughly, removing any old gasket material or sealant.
8. Install the new key, gasket, and wear plate.
9. Slide the new impeller onto the driveshaft, turning it clockwise to fit it into the housing cup.
10. Reinstall the water pump housing and tighten the bolts to the manufacturer's specified torque.
11. Reattach the lower unit to the midsection, ensuring the driveshaft and water tube align correctly.
12. Refill the gear case with fresh oil, reinstall the engine cover, and test operation in water, confirming a strong tell-tale stream.

Troubleshooting & FAQ

How do I confirm this fits my engine?
Check the "Compatible Engine Models" table on this page. This kit is designed for specific Honda 8 HP, 9.9 HP, and 10 HP outboard engines from 2002–2006, including models like BF8D, BF9.9D, and BF10D. Always verify your specific model and year range before ordering.

How often should I replace the water pump impeller?
For optimal engine protection, we recommend replacing the water pump impeller every 1-2 years or every 100-200 hours of use. If you frequently operate in sandy, silty, or debris-heavy water, more frequent inspections and replacements are advised.

What are the signs of a failing impeller?
Common signs of a worn or damaged impeller include a weak or non-existent water stream from the "tell-tale" outlet, engine overheating alarms, steam from the exhaust, or a noticeable drop in cooling performance at various RPMs.

OEM vs. Aftermarket?
This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?
We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?
This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.