Outboard Transom Saver Support – Fits 2 and 3 Ram Trim and Tilt Systems (Replaces M-Y Wedge, GHmarine)

Outboard Transom Saver Support – Fits 2 and 3 Ram Trim and Tilt Systems

This transom saver is designed for outboard motors equipped with 2 and 3 ram trim and tilt systems. It offers a secure way to support your engine during transport, reducing stress on the hydraulic system and transom. It is compatible with a wide range of major brands, including Yamaha (115-350hp), Mercury (175-300hp), Suzuki (140-350hp), Honda (75-350hp), Evinrude (140-300hp), and Tohatsu (75-250hp).

This component is a direct replacement for M-Y Wedge M-YM123, M-Y Wedge HYCL-001, GHmarine 1H03, and Ciweisah Boat-YSL.

• Installation Method: Slips directly over the trim ram piston(s) without tools.
• Durable Material: Constructed from high-quality EPDM Rubber with a rigid ABS/PC Hybrid liner for longevity and shock absorption.
• Added Stability: Includes steer stop clips to prevent engine movement during trailering.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across other aftermarket brands.

Compatible Engine Models

Confirm your engine model and year in the tables below. Please check compatibility notes carefully, as some models may require modification for a proper fit.

For Yamaha owners, here’s a guide to help you identify your engine’s serial/model: Yamaha Serial Number Guide. You can also review exploded diagrams to verify part numbers: Yamaha Parts Diagrams & Catalog.

For Mercury owners, here’s a guide to help you identify your engine’s serial/model: Mercury Serial Number Guide. You can also review exploded diagrams to verify part numbers: Mercury Parts Diagrams & Catalog.

For Suzuki owners, you can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

For Johnson/Evinrude owners, here’s a guide to help you identify your engine’s serial/model: Johnson Serial Number Guide.

Yamaha

Mercury

Suzuki

Honda

Evinrude

Tohatsu

Technical Specifications

Package Contents

• 1 x Transom Saver Support
• 2 x Steer Stop Stabilizer Clips (Included with Ciweisah model equivalent)

Installation Guide

Follow these steps to safely install your transom saver:

1. Trim the outboard motor to the full upward position to expose the trim rams.
2. Slide the transom saver support block over one or two of the trim ram pistons, depending on your system.
3. Ensure the support is seated correctly on the ram(s).
4. Slowly lower the engine until it makes firm contact with the support block, creating pressure to hold it in place.
5. For added security, install the two steer stop stabilizer clips onto the hydraulic steering cylinder shafts on either side of the outboard. This prevents the engine from turning during transit.
6. Before trailering, always double-check that the motor is secure and does not have excessive movement.

Troubleshooting & FAQ

Q: How do I know if this transom saver will fit my specific outboard model?
A: This support is designed for a wide range of outboards from Yamaha, Mercury, Suzuki, Honda, Evinrude, and Tohatsu that use a 2 or 3 ram trim/tilt system. Please review our compatibility tables for specific model and horsepower ranges. Pay close attention to the "Notes" column, as some engines may require minor modification for a proper fit (e.g., cutting a small section) or are not compatible (e.g., Mercury Verado models).

Q: What is the purpose of the two included red clips?
A: The two steer stop stabilizer clips are designed to be placed on your boat's hydraulic steering rams. They prevent the engine from turning side-to-side during trailering, providing extra stability and protecting your steering system.

Q: How is this different from a traditional transom saver bar?
A: Unlike a traditional bar that connects the motor's lower unit to the trailer frame, this type of support works by bracing the engine's own tilt and trim system. It's often quicker to install and removes the risk of damaging the lower unit or trailer if you hit a large bump. It isolates the motor's movement without transferring shock to the trailer.

Q: Is this part an OEM component?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.