Water Pump Impeller – Fits Suzuki DT50/DT60/DT75/DT85/PU85JET Outboards (Replaces 17461-95300)

Water Pump Impeller – Fits Suzuki DT50/DT60/DT75/DT85/PU85JET Outboards (Replaces 17461-95300)

This water pump impeller is designed for a wide range of Suzuki 2-Stroke outboards from 50 to 85 HP, manufactured between 1978 and 2000. It covers models including the DT50, DT60, DT75, DT85, and the PU85JET jet drive variant.

As a direct replacement, this impeller interchanges with Suzuki OEM part numbers 17461-95300, 17461-95301, 17461-95302, 17461-95501, and 17461-95500. It also replaces common aftermarket parts from Sierra (18-3095), CEF (500360), GLM (91018), and Mallory Marine (9-45502).

• Direct Replacement: Engineered to meet or exceed OEM specifications for a direct fit and reliable performance.
• Durable Construction: Made from a robust blend of high-quality neoprene and hardened nylon for longevity and resistance to wear.
• Simple Installation: Designed for press-fit installation on the drive shaft, facilitating straightforward maintenance.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Compatible Engine Models

Confirm your engine model/year in the table below. For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Technical Specifications

Package Contents

• 1 x Water Pump Impeller (Replaces 17461-95300)

Explosion Diagram

Installation Guide

1. Safety First: Disconnect the battery and ensure the engine is securely mounted.
2. Access the Lower Unit: Unbolt and carefully detach the lower unit (gearcase) from the outboard's main leg.
3. Open Water Pump Housing: Locate the water pump assembly on top of the lower unit. Remove the bolts to lift off the housing cover.
4. Inspect Old Impeller: Note the orientation of the impeller blades before removal. This is critical for correct installation of the new part.
5. Remove Old Impeller: Slide the old impeller off the driveshaft. Be sure to remove the small key that locks it in place.
6. Clean and Inspect: Thoroughly clean the inside of the pump housing and wear plate. Check for scoring, warping, or corrosion and replace if necessary.
7. Install New Impeller: Apply a light coat of marine grease to the housing interior. Insert the key and slide the new impeller onto the shaft, turning it in a clockwise direction to correctly orient the blades.
8. Reassemble: Reinstall the housing and tighten the bolts to the manufacturer's specified torque.
9. Reattach Lower Unit: Guide the lower unit back into place, ensuring the driveshaft, shift shaft, and water tube align properly. Secure it with the mounting bolts.
10. Test Operation: Reconnect the battery. Start the engine in water and verify a steady stream of water is exiting the tell-tale port.

Troubleshooting & FAQ

Q: How do I confirm this impeller fits my Suzuki engine?
A: Check your engine's model and year against the "Compatible Engine Models" list. This impeller fits Suzuki DT50, DT60, DT75, DT85, and PU85JET models within the specified year ranges (1978–2000). Also, verify your existing part number matches one of the cross-referenced numbers like Suzuki 17461-95300 or Sierra 18-3095.

Q: What are the signs that my water pump impeller is failing?
A: The most common signs are the engine overheating at idle or low speeds, or a weak, intermittent water stream from the "tell-tale" outlet port. During a physical inspection, you may find the impeller blades are cracked, brittle, torn, or have taken a permanent set.

Q: How often should I replace my impeller?
A: For preventative maintenance, it is highly recommended to replace your impeller every 1-2 years or every 100-200 hours of operation. The interval depends on usage, particularly whether you operate in saltwater or sandy/silty conditions, which can accelerate wear.

Q: OEM vs. Aftermarket?
A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?
A: We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?
A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.