Skeg Guard for Mercury Verado, Optimax & Command Thrust 75-300HP – JLM0065 (Replaces 27211)

Skeg Guard for Mercury Verado, Optimax & Command Thrust

The JLM Marine model JLM0065 is a stainless steel, bolt-on skeg protector for the engine and drive applications identified by the reference checks below. It fits over the skeg below the lower unit to help limit wear. A damaged skeg must retain enough sound material to support the guard and its mounting hardware.

Check Before Ordering

Match the brand, horsepower, model, gearcase, year and every restriction in the application table. Engines with the same horsepower can use different lower units. Confirm the actual skeg profile before ordering.

Fitment Table

The applications below follow JLM Marine's current application list. Each row applies only to the model details and years shown; do not extend a listed year range to later models.

Not listed? Send us your engine model, year and a photo of your gearcase before ordering.

Aftermarket reference numbers: Megaware SkegGuard: 27211; 27411; 27311; 27413; Megaware SkegPro: SP656; Panther Safe-Skeg: 35-SS660; Skeggard: 99007. These are aftermarket references, not engine-manufacturer OEM part numbers. Match the application and actual guard profile; a reference number alone does not confirm fitment. JLM Marine is an independent aftermarket supplier; the reference brands do not manufacture or endorse this JLM product.

Construction & Package

One stainless steel skeg guard. The listing identifies this as a mounting-hardware kit; confirm the current hardware pack with JLM Marine if bolt sizes, tools or a drill bit are required.

Before Installation

• Keep the engine off and the boat secure. Follow the engine and kit instructions.
• Check the guard profile, seating and mounting position before drilling. Do not force a mismatched guard into place.
• Use the drilling size, fasteners and tightening procedure specified for the actual kit; generic instructions may not apply.
• Do not install on a cracked gearcase or a skeg with insufficient sound material. Ask a qualified marine technician if damage or fit is uncertain.

This guard does not guarantee protection from collisions, restore a structurally damaged lower unit or guarantee improved steering or speed.

Need a Fitment Check?

Email info@jlm-marine.com with the full engine or drive model, model year, serial-number details, shaft length, and clear side and rear photos of the skeg. Include any reference number you are replacing.