Customer Service: info@jlm-marine.com
Free shipping. No Minimum Purchase
Couldn't load pickup availability
Free standard shipping on all orders
Most new, unused items may be returned within 7 days of delivery, subject to our Returns Policy. A 20% processing/restocking fee may apply for returns that are not the result of our error. Original shipping charges are non-refundable.
If the return is due to our mistake (incorrect or defective item), we will cover the return shipping cost and issue a full refund.
EU customers are entitled to a 14-day cooling-off period in accordance with applicable consumer protection regulations. Certain exclusions may apply.
Refunds are issued after the returned item is received and inspected. Processing times may vary depending on shipping transit and payment provider handling, but most refunds are completed promptly.
To request a return, please contact us at info@jlm-marine.com with your order number for return authorization. For full terms, conditions, and exclusions, please refer to our complete Returns & Refunds Policy page.
This aftermarket 3-wire trim position sender replaces Volvo Penta 21484383 (supersedes 3841840). It reports sterndrive trim angle to the helm gauge on Volvo Penta SX-A, DPS-A, DPS-B, and TSK applications that call for this OEM number.
Match this part in this order:
1. OEM number on the sender you are removing or in your parts catalog (21484383 or superseded 3841840)
2. Drive / transom family — Volvo Penta SX-A, DPS-A, DPS-B, or TSK calling for that number
3. Wire count — this listing is the 3-wire contact-style trim sender (not a later non-contact trim-sender kit)
Confirm the connector and mounting layout against the product images and your original unit before ordering. Trim senders can share a similar housing while serving different drive generations or wiring layouts, so the OEM number and drive family matter more than appearance alone.
Use this table to confirm equivalent Volvo Penta part numbers. 21484383 supersedes earlier number 3841840 for the same trim-sender application.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| OEM | Volvo Penta | 21484383 | Current primary part number |
| OEM | Volvo Penta | 3841840 | Earlier number superseded by 21484383 |
Part numbers are listed for identification only. This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Volvo Penta component.
Confirm your drive or transom shield model on the identification plate and that the removed sender is numbered 21484383 or 3841840. Review Volvo Penta diagrams when available: Parts Diagrams.
| Brand | Application | Notes |
|---|---|---|
| Volvo Penta | SX-A sterndrive | 3-wire trim position sender when OEM calls for 21484383 / 3841840 |
| Volvo Penta | DPS-A / DPS-B sterndrive | Same 3-wire sender application family |
| Volvo Penta | TSK transom / trim system (including TSK-A with SX-A) | Match by OEM number and wiring layout; later non-contact kits differ |
Important: Do not order from drive family alone if your catalog or removed part shows a different number (for example a later non-contact trim-sender kit). This listing is for the 3-wire contact-style sender 21484383 / 3841840 only.
| Specification | Value |
|---|---|
| Part type | Trim position sender / trim sensor |
| Primary OEM number | 21484383 |
| Superseded OEM number | 3841840 |
| Wire configuration | 3-wire |
| Application family | Volvo Penta SX-A, DPS-A, DPS-B, TSK |
| Function | Transmits sterndrive trim angle to the helm trim gauge |
Disconnect the battery. Locate the existing trim sender on the sterndrive or TSK trim assembly and note wire routing and connector orientation before unplugging.
Remove the retaining hardware that secures the sender. Withdraw the old unit carefully so the mounting bore and any sealing grommet are not damaged.
Install the new sender in the same orientation. Seat any grommet or seal fully, then refit the retaining hardware to the original torque practice for your drive.
Reconnect the 3-wire harness. Confirm the connector is fully seated and that wires are clear of moving trim linkage.
Reconnect the battery. Cycle the drive through full down and full up and verify the helm trim gauge tracks smoothly. Recheck for water intrusion at the mount after the first sea trial.
Note: Professional installation is recommended to ensure safety and optimal performance.
This is an aftermarket JLM Marine replacement matched to Volvo Penta 21484383 / 3841840. It is not a genuine Volvo Penta part.
Check the identification plate for SX-A, DPS-A, DPS-B, or TSK, then match the number on the sender you are removing to 21484383 or 3841840. If your catalog calls for a different trim-sender kit number, do not order this listing.
Common signs include an erratic or stuck trim gauge, no gauge movement when trimming, or a gauge that no longer tracks drive angle. Inspect wiring and grounds before replacing the sender.
No. This listing is the Volvo Penta 3-wire sender 21484383 / 3841840 for SX-A, DPS-A, DPS-B, and TSK applications. Older OMC Cobra 2-wire senders use a different part family.
We can ship to virtually any address in the world with free shipping available for most regions.
For our typical US and Canadian customers , our shipping timeframes are as follows:
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.
As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.
We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.
Thanks for subscribing!
This email has been registered!