Customer Service: info@jlm-marine.com
Free shipping. No Minimum Purchase
Couldn't load pickup availability
Free standard shipping on all orders
Most new, unused items may be returned within 7 days of delivery, subject to our Returns Policy. A 20% processing/restocking fee may apply for returns that are not the result of our error. Original shipping charges are non-refundable.
If the return is due to our mistake (incorrect or defective item), we will cover the return shipping cost and issue a full refund.
EU customers are entitled to a 14-day cooling-off period in accordance with applicable consumer protection regulations. Certain exclusions may apply.
Refunds are issued after the returned item is received and inspected. Processing times may vary depending on shipping transit and payment provider handling, but most refunds are completed promptly.
To request a return, please contact us at info@jlm-marine.com with your order number for return authorization. For full terms, conditions, and exclusions, please refer to our complete Returns & Refunds Policy page.
This aftermarket combined manifold absolute pressure and intake-air temperature (T-MAP) sensor replaces Bosch 0261230283 and the related Fiat / Iveco OE number 504064370. It measures intake manifold absolute pressure and air temperature for fuel and boost control.
Match this part in this order:
1. Original part number stamped on the sensor or listed in your parts catalog — 0261230283, 0261230042, or 504064370
2. Connector — compact 4-pin plug with locking tab (numeral “4” may be molded on the housing)
3. Probe form — cylindrical sensing tip with a bright green O-ring seal and slotted protective cage
Compare the product images to your original sensor before ordering. This is not a MerCruiser / Mercury Marine MAP family (for example 864856A1 or 8M0087834) — do not order this listing if your OEM number belongs to a different sensor design.
Use this table to confirm equivalent OEM numbers for the same T-MAP sensor application.
| Type | Brand | Part Number | Notes |
|---|---|---|---|
| OEM | Bosch | 0261230283 | Primary listing number (0 261 230 283) |
| OEM | Bosch | 0261230042 | Former number; superseded by 0261230283 |
| OEM | Fiat / Iveco | 504064370 | Vehicle OE cross for the same sensor |
This is an aftermarket part manufactured by JLM Marine and is not sold as a genuine Bosch or Fiat / Iveco component.
| Specification | Value |
|---|---|
| Part type | Combined MAP + intake-air temperature (T-MAP) sensor |
| Primary OEM number | 0261230283 |
| Pressure range | 0.2 – 2.5 bar (20 – 250 kPa) |
| Temperature range | −40 °C to 130 °C |
| Connector | Compact 4-pin with locking tab |
| Seal / probe | Green O-ring on probe; slotted protective cage |
| Body | Black molded plastic, L-shaped plug-in form |
Stop the engine and disconnect the battery negative terminal before working on intake sensors.
Locate the T-MAP sensor on the intake manifold or charge-air duct. Release the 4-pin connector lock and unplug the harness.
Remove the mounting fastener (if used) and pull the sensor straight out of the port. Inspect the bore for debris and replace any damaged port seal surface.
Lightly lubricate the green O-ring with clean engine oil (avoid silicone grease unless your service procedure specifies it), seat the new sensor fully, and secure the mount.
Reconnect the 4-pin plug until it clicks, reconnect the battery, and clear any related diagnostic codes after confirming a pressure-tight install.
Warning: A poor O-ring seal or mismatched connector can cause boost/MAP faults, rough idle, or limp mode. Confirm the OE number and probe shape against the product images before start-up.
Match the number stamped on your original sensor to 0261230283, 0261230042, or 504064370, then compare the 4-pin connector and green O-ring probe to the product images. Do not rely on engine model alone.
No. MerCruiser / Mercury MAP numbers such as 864856A1 and 8M0087834 are different sensor families. This listing is for the Bosch 0261230283 T-MAP form only.
This is an aftermarket replacement manufactured by JLM Marine to match the form and electrical role of Bosch 0261230283. It is not a genuine Bosch or Fiat / Iveco part.
We can ship to virtually any address in the world with free shipping available for most regions.
For our typical US and Canadian customers , our shipping timeframes are as follows:
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Founded in 2002, JLM Marine has established itself as a dedicated manufacturer of high-quality marine parts, based in China. Our commitment to excellence in manufacturing has earned us the trust of top marine brands globally.
As a direct supplier, we bypass intermediaries, which allows us to offer competitive prices without compromising on quality. This approach not only supports cost-efficiency but also ensures that our customers receive the best value directly from the source.
We are excited to expand our reach through retail channels, bringing our expertise and commitment to quality directly to boat owners and enthusiasts worldwide.
Thanks for subscribing!
This email has been registered!